| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 634504 |
| Application ID | lp782Sh1G9l5tZC12PaHkQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 104.43kB (1305313 bits) |
| Date Submitted | 2006-03-08 00:00:00 |
| Date Available | 2006-03-08 00:00:00 |
| Creation Date | 2006-02-28 16:51:21 |
| Document Lastmod | 2006-03-07 15:12:48 |
| Document Title | User manual |
MOTOROLA
Two- Way Radio
User's Guide
KEM-PKM‘lQ
Page loin
important information on Safe and Efficient Operation
Read This Information Before Using Your Radio.
The information provided in this document supersedes the general
safety information in user guides published priarto December 1,2002,
Transmit and Receive Procedure
Yourtwo-way radio contains a transmitter and a receiver To control
your exposure and ensure compliance with the generai
population/uncontrolled environment exposure limits, always adhere to
the following procedure:
- Transmit no more than 50% afthe time.
' To receive calls, release the PTl button.
° To transmit (talk), press the Push to Talk (PW) button.
Transmitting 50% ofthe time, or less, is important because the radio
generates measurabie RF energy exposure only when transmitting (in
terms of measuring standards compliance).
Exposure to Radio Frequency Energy
Your Motorola two-way radio complies with the following RF energy
exposure standards and guidelines:
- United States Federal communications Commission, Code of Federal
Regulations; MCFR part 2 sub-partJ
- American National Standards Institute (ANSIl/lnstitute of Electrical
and Electronic Engineers (lEEEl 095 14992
- institute oi Electrical and Electronics Engineers llEEEl 09514999
Edition
- lntemational Commission on Non-Ionizing Radiation Protection
lICNlRPl 1998
P13: 2 ul'll
- Ministry ol Health (Canada) Safety Code 6. Limits of Human Exposure
to Radiotrequency Electromagnetic Fields in the Frequency Range
from 3 KHZ to 300 GHz, l999
0 Australian communications Authority Radiocommunications
Electromagnetic Radiation—Human Exposure) Standard, 2003
' ANATAL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of
limitation of exposure to electrical, magnetic and electromagnetic
fields in the radio frequency range between 9 KHZ and SOUGHZ" and
"Attachment to resolution #303 from July 2, 2002"
To assure optimal radio performance and make sure human exposure
to radio frequency electromagnetic energy is within the guidelines set
forth in the above standards, always adhere to the following
procedures.
Portable Radio Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage
the radio and may violate FCC regulations.
Do NOT hold the antenna when the radio is "lN USE." Holding the
antenna affects the effective range.
Body»W0rn Operadon
To maintain compliances with FCC/Health Canada BF exposure
guidelines, if you wear a radio on your body when transmitting, always
place the radio in a Motorola-supplied or approved clip, holder, holster,
case or body harness forthis product. Use of non~lVlotorola~approved
accessories may exceed FCC/Health Canada RF exposure guidelines.
liyou do not use one of the Motorola-supplied or approved body-worn
accessories and are not using the radio held in the normal use
position, ensure the radio and its antenna are at least1 inch (2.5 ml
lrom your body when transmitting
ngcsolzl
Dara Uperatr'on
it applicable, when using any data feature of the radio with or without
an accessory cable, position the radio and its antenna at least one
inch (2.5 cm) from the body.
ApprovedAccessones
For a list of approved Motorola accessories, visit out Web site at
wwinlotorolacom.
Electromagnetic interference/Compatibility
Note: Nearly every electronic device is susceptible to electromagnetic
interference (EM!) if inadequately shielded, designed or otherwise
configured for electromagnetic compatibility. This device complies with
Part is otthe FCC Rules. Operation is subject to the following two
conditions:
i. This device may not cause harmful interference; and
Z. This device must accept any interference received, including
interference that may cause undesrred operation
Facilities
To avoid electromagnetic interference and/or compatibility conflicts,
turn off your radio in any facrlity where posted notices instruct you to
do so. Hospitals or health care facilities may be using equipment that is
sensitive to external RF energy.
Aircraft
When instructed to do so. turn off your radio when onboard an aircraft.
Any use of a radio must he in accordance with applicable regulations
per airline crew instructions.
Medical Devices — Pacemakers
The Advanced Medical Technology Association recommends that a
minimum separation of 6 inches (i5 cm) be maintained between a
handheld Wireless radio and a pacemaker. These recommendations are
consistent with the independent research by and recommendations of
the US. Food and Drug Administration,
9.“ I am
People With pacemakers should:
~ ALWAYS keep the radio more than 6 inches “5 cm) from their
pacemaker when the radio lS turned ON.
~ Not carry the radio in the breast pocket.
' Use the ear opposite the pacemakerto minimize the potential for
interference.
~ Tom the radio OFF immediately if there is any reason to suspect that
interference is taking place.
Medical Devices ~ Hearing Aids
Some digital wireless radios may interfere with some hearing aids, ln
the event of such interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer
of your device to determine if it is adequately shielded from RF energy.
Your physrcran may be able to assist you in obtaining this information.
Safety and General Use While Driving
Check the laws and regulations regardingthe use of radios in the area
where you drive, and always obey them. if you do use your radio while
driving, please:
' Give full attention to driving and to the road,
- Use handsfree operation, it available
0 Pull off the road and park before making or answering a call if driving
conditions so require.
Do not place a portable radio in the area over an air bag or in the air
bag deployment area. Air bags inflate with great force. if a portable
radio is placed in the air bag deployment area and the air bag inflates,
the radio may be propelled with great force and cause serious injuryto
occupants of the vehicle.
9.x, s u4'27
Potential/y Exploszve Atmospheres
Turn off your radio prior to entering any area with a potentially explosive
atmosphere. Only radic types that are especially qualified should be
used in such areas as "Intrinsically Safe," Do not remove, install or
charge batteries in such areas. Sparks in a potentially explosrve
atmosphere can cause an explosion or tire resulting in bodily injury or
even death.
Note: The areas with potentially explosive atmospheres referred to
above include fueling area such as below decks on boats, fuel or
chemical transfer or storage facilities, areas where the air contains
chemicals or particles (such as grain, dust or metal powders) and any
other area where you would normally be advised to turn off your vehicle
engine. Areas with potentially explosive atmospheres are oftenwbut not
always—posted.
Blasting Caps and Areas
To avoid possible interlerance with blasting operations, turn oft your
radio when you are near electrical blasting caps, in a blasting area, or in
areas posted "Turn offtwo-way radios." Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable radio that has a damaged antenna. lf a
damaged antenna comes into contact with your skin, a minor burn can
result.
Batteries
All batteries can cause property damage and/or bodily injury such as
burns if a conductive materialfilike jewelry, keys or beaded chains—
touch exposed terminals. The conductive material may complete an
electrical circuit (short circuit) and become quite hot, Exercise care in
handling any charged battery, particularly when placing it inside a
pocket, purse or other container With metal objects.
P13: earl?
Battery Charger Safety instructions:
Save these Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate or disassemble the charger if it has received a sharp
blow, or has been dropped or damaged in any way.
St Never alter the AC cord or plug provrded with the unit. Ifthe plug Will
not fit the outlet, have the proper outlet installed by a qualified
electrician, An improper condition can result in a risk Dielectric
shock.
4. To reduce the risk of damage to the cord or plug, pull the plug rather
than the cord when disconnecting the charger from the AC receptacle.
5. To reduce the risk of electric shock, unplug the charger from the outlet
before attempting any maintenance or cleaning,
8. Use of an attachment not recommended or sold by Motorola may
result in a risk of fire, electric shock or personal injury.
7. Malta sure the cord is located so it will not he stepped on, tripped over
or subjected to damage or stress.
8. An extension cord should not be used unless absolutely necessary.
Use of an improper extension cord could result in a risk of a fire
and/or electric shock, If an extension cord must be used, make sure
that:
- The pins on the plug of the extension cord are the same number, size
and shape as those on the plug ofthe charger,
- The extension cord is properly wired and in good electrical condition,
' The cord size is 18 AWG for lengths up to 100 feet, and 18 AWG for
lengths upto l50 feet.
9. The supply cord of this charger cannot be replaced. lithe cord is
damaged, call Motorola Product Services at LEGO—3532729 in the USA
or l<888~390-6456 TlY (text telephone).
PAgeiolT/
FCC Licensing Information > 7 .
Your Motorola radio operates on General Mobile Radio Service (GMHS)
frequencies and is subject to the Rules and Regulations of the Federal
Communications Commission (FCClr The FCC requires that all operators
using GMRS lrequencies obtain a radio license before operating their
equipment. To obtain the FCC forms, please request Form 605 and 159,
which includes all ofthe forms and instructions you will need.
If you wish to have the document faxed or mailed. or if you have
questions, please use the following contact information:
For a Fax: For Mail Service: if You Have Questions
Contact the Fax-On Call the FCC Forms about the FCC License:
Demand 5 stem Hotline Call the FCC
l-ZGZ-4l8-Ol77 l-BGD-4l8-FGRM (3676) l-888-CALL—FCC
(2255322)
You may also visit the FCC’s Web site at htth/Wwwtfccgov.
Changes or modifications not expressly approved by Motorola may void
the user’s authority granted by the FCC to operate this radio and should
not he made. To comply with FCC requirements, transmitter adjustments
should be made only by or under the supervision of a person certified as
technically qualified to perform transmitter maintenance and repairs in
the provide land moblle and fixed services as certified by an organization
representative ofthe user of those services. Replacement of any
transmitter componentlcrystal, semiconductor, etc) not authorized by
the FCC equipment authorization for this radio could violate FCC rules.
Note: Use of this radio outside the country where it was intended to be
distributed is sublectto government regulations and may be prohibited
mam 17
NOTE "trzs soutpmem ca 35190 aw foam 10 cc "y awn m rims rs» a
Class B D'lgfial device pursuant to Pan is or ma FCC Rules These limits are
oestgned m prowess reasonacse preleclron agarnsr harmful marreence in a residsfllial
Estsiallatcon This equrpmen! garerares, uses and can radiate rants frequency energy
and if not instalied and used in accordance in the tnstrudlcfls may cause harmful
inrerr’arenca to radio communications.
I'i
v5 er, mere rs no guarantee (hat interference Mil 00k occur in a particular
installafion If this equipment dues cause harmful interference to radio or lelevisian
recaallon, which can be determines by turning me equipment ofi and on the user is
encouraged to try to correct the interference my one or more or are following
measures.
~ Reoneni or relocate the receiving antenna
~ increase the separation bewJeen the equipment and receiver.
~ Connect the equipment into an outlet on a Circuit different from that to which fits
receiver is connected.
‘ Consull the dealer or an experienced radioiTV technician for help,
This Class B digital appara‘ms complies wiih Canadian 2053003.
Get appareil numérlque de la Classe B est Conforme 3 la narme NMB—GOB du Canada
For More Information
For further information, you may call Motorola at l~800~638~5119 (US.
and Canada) or visit us on the Internet at httpzllwmmmotorolaoom,
me 701'27
control Buttons
Use Etc:
. Turn radio on/ofit
- Increase or decrease volume
- Scan to see if
anyone is on the
selected channel
Use fig“ to:
Use Push toTalk
to:
‘ Talk
~ Save a setting
- Select Menu
options
- Exit the Menu
(when pressed
while in a Menu]
~ Lock and unlock
the keypad (when
held down and
not in a Menu)
Use a) to:
\/
- Transmit call tone
Accessory Jack
Use 6 and Q
to:
' Scrollthrough
menus
Speaker
- Turn weather
on/off M
Microphone
rm to all?
Display Screen Guide .
ii? a a n»
Numbers for
Channel,
Call Tone
Numbers for
Codes
0 N - On/Of-l for
OFF each feature
@— Battery Meter
«(3)» — Channel indicator
(see Initial Set Up) Z _ Scan
— CallTone,
a — Lock Keypad Tone
0)» “Talk Confirmation Tone @ _ Weather Alert
(Roger Beep) iVOX — Hands—Free Use
Without
QT — Noise Filtering Accessories
m: n cm
. Getting Started
Installing the Batteries:
Your radio uses three AAA Alkaline batteries and beeps when the
batteries are low.
1. Turn the radio off.
2. With the back of the radio facing you, litt the battery latch up to
release the battery cover and remove the cover.
3. insert three AAA Alkaline batteries as shown on the inside of the
battery compartment.
4. Reposition the battery cover and press down to secure.
NOTE: The SXEUO model radio can use a NiMH rechargeable battery
instead of three AAA batteries.
Installing the NiMH Battery Pack:
ll Follow step 2 above to remove the batten! cover.
2. Remove the battery pack from the clear plastic bag, Do not
disassemble or unwrap the battery pack.
3 insert the NiMH battery pack so the "This Side Up” is showing.
4. Reposition the batterycover and press down to secure.
Battery Meter
The battery icon shows the battery charge level, from full Ell
to empty__"'___“): . When the battery is empty‘ the radio chirps periodically
after releasing (Low Battery Alert). The radio powers oil when we
voltage drops below a predetermined level to protect the rechargeable
battery.
Note: Remove the batteries before storing your radio for extended
periods of time Batteries corrode over time and may cause permanent
damage to your radio.
pm mm
Using the Desk Stand Charger (Optional Accessory}
The desk stand charger provides drop-in charging convenience for
NiMH batteries and can be placed on any flat surface, such as a desk
or workbench. Charge the NiMH battery overnight (at least 16 hours)
before using it for the first time. After the initial charge, an empty
battery is fully charged within 14 hours.
1. Follow the steps above to install a NiMl-l Battery Pack.
2. Plug the AC power supply into the plug on the desk stand.
3, Plug the AC power supply into a standard wall outlet
4. With a radio lacing forward, slide it into one of the charging pockets.
Notes
- The light on the charging base will glow continuously when
radio/battery is inserted,
- When moving between hot and cold temperatures, do not charge the
battery until the battery temperature acolimates (usually about 20
minutes).
- For optimal battery life, remove the radio or batteryfrom the charger
within lG hours. Do not store the radio in the charger.
° Turn radio off while in charging tray.
Attaching and Removing the belt clip
1. Align the belt clip post with the hole in the back of the radio,
2. Gently push until the clip clicks in place
To Remove
1. Push down on the release tab at the top of the belt clip to release
the catch.
2. Pull the belt clip away from the back of the radio,
as: is nll7
Turning Your Radio On and Off
Turn E olockwrse to turn the radio on and oounterclockwrse to turn
the radio off.
i. The radio chirps and briefly shows all features icons available on
your radio.
2. The display then shows the current channel, code and features that
are selected.
Setting the Volume
Press and hold@while rotating gum” you reach a comfortable
listening level.
1. Rotate Eclockwise to increase the volume
2. Rotate Bodunterolockwrse to decrease the volume.
Do not hold the radio close to your ear. if the volume is set to an
uncomfortable level, it could hurtyour ear.
Talking and Listening
To communicate, all radios in your group must be set to the same
channel and Interference Eliminator Code,
1. To talk, press and hold @
2. When you are finished talking, release ..
For maximum clarity, hold the radio two to three inches away from your
mouth and speak directly into the microphone. Do not cover the
microphone while talking.
Page Hal17
Talk Range
Vour radio is designed to maximize performance and improve
transmission range. Do not use the radios closerthan five feet apart.
Monitor Button
Pressing and holding @forthree seconds allows you to listen to the
volume level of the radio when you are not receiving. This allows you
to adjus1 the volume, if necessary. You can also press to check
for activity on the current channel before you talk.
Push to Talk ® Timeout Timer
To prevent accidental transmissions and save battery life,the radio
emits a continuous warning tone and stops transmitting if you press
PTT for EU continuous seconds.
Initial Setup
Selecting the Channel
Your radios has 22 channels. Channels 8714 are FRS 0.5 Wait only and
all other channels are GMRS.
1. With the radio on press @ When the radio IS on a 0 5 watt
channel, (dm displays When the radio is on a 1 watt channel,
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : No
Page Count : 14
XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6
About : uuid:9d036cf8-5717-493e-9b32-43a94dbbd9ca
Modify Date : 2006:03:07 15:12:48-05:00
Create Date : 2006:02:28 16:51:21+08:00
Metadata Date : 2006:03:07 15:12:48-05:00
Document ID : uuid:eae7edc8-a70c-4dea-bef6-9b214ec8d744
Instance ID : uuid:26bc9b4f-fa36-4c5a-b5d1-f62edded50e1
Format : application/pdf
EXIF Metadata provided by EXIF.tools