Giant Electronics T4525 14 Channel Family Radio Service Transceiver User Manual 6864110W13o

Giant Electronics Ltd 14 Channel Family Radio Service Transceiver 6864110W13o

User Manual

Model T4525@6864110W13@6864110W13-O031065o.epsTwo-Way RadioUser's Guide6864110W13o.book  Page 1  Tuesday, January 21, 2003  4:28 PM
DraftCongratulations on your purchase of a Motorola product!Product registration is an important step. Registering helps us facilitate warranty service and permits us to contact you should your Motorola product require an update or other service. To register your product online, visit: www.motorola.com/warranty/radios.Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.For a copy of a large-print version of this guide, or for product-related questions, call:1-800-353-2729 in the USA1-888-390-6456 TTY (Text Telephone)On the Web: www.motorola.com/talkabout6864110W13o.book  Page 1  Tuesday, January 21, 2003  4:28 PM
DraftFinding the ControlsT4525345126864110W13o.book  Page 2  Tuesday, January 21, 2003  4:28 PM
Draft1# - Short press sends call tone.2Push to Talk (PTT)• Push to transmit, release to listen.• In menu mode, push to confirm selection.3$• Long press turns radio on or off.• Short press enters menu mode, where: first press changes channel, second press monitors channel for activity.4%• Increases volume (volume level flashes and / displays).• In menu mode, increments channel (channel number flashes).5&• Decreases volume (volume level flashes and / displays).• In menu mode, decreases channel (channel number flashes).6864110W13o.book  Page 3  Tuesday, January 21, 2003  4:28 PM
DraftInstalling the BatteriesYour radio uses 3 AAA Alkaline batteries, and beeps when the batteries are low.1. Turn the radio off.2. Use a coin to wedge the battery cover open.3. Insert batteries as shown on inside of battery compartment.4. Replace the battery cover.Turning Your Radio On and OffTo turn on, press and hold $ until a channel number appears and the radio beeps.To turn off, press and hold $ until the display goes blank.Adjusting the VolumePress % to increase or & to decrease the volume. The volume level flashes and /displays.Setting the ChannelThe channel is the frequency your radio uses to transmit. Your radio has 14 channels.1. Briefly press and release $. The channel number flashes.2. Press % or & to select a channel.3. Press PTT to confirm.6864110W13o.book  Page 4  Tuesday, January 21, 2003  4:28 PM
DraftChannel Frequency Description1 462.5625 MHz FRS2 462.5875 MHz  FRS3 462.6125 MHz  FRS4 462.6375 MHz  FRS5 462.6625 MHz  FRS6 462.6875 MHz  FRS7 462.7125 MHz  FRS8 467.5625 MHz  FRS9 467.5875 MHz  FRS10 467.6125 MHz  FRS11 467.6375 MHz  FRS12 467.6625 MHz  FRS13 467.6875 MHz  FRS14 467.7125 MHz  FRS6864110W13o.book  Page 5  Tuesday, January 21, 2003  4:28 PM
DraftTalking and ListeningTo talk, press and hold the PTT button.When you are finished talking, release PTT.For maximum clarity, hold the radio 2 to 3 inches away from your mouth and speak directly into the microphone. Do not cover the microphone while talking.Sending a Call ToneA call tone alerts others you want to talk. To send a call tone to other radios in your group, press #.6864110W13o.book  Page 6  Tuesday, January 21, 2003  4:28 PM
DraftAttaching the Belt Clip (Included)Hook the belt clip into the notch at the top of the radio and slide down until it clicks into place.To remove, squeeze the release latch together and slide the clip up and away from the radio. 6864110W13o.book  Page 7  Tuesday, January 21, 2003  4:28 PM
DraftSafety and General InformationImportant Information on Safe and Efficient Operation. Read This Information Before Using Your RadioThe information provided in this document supersedes the general safety information contained in user guides published prior to July 2000.Transmit and Receive ProcedureYour two-way radio contains a transmitter and a receiver. To control your exposure and ensure compliance with the general population/uncontrolled environment exposure limits, always adhere to the following procedure: • Transmit no more than 50% of the time.• To transmit (talk), press the Push to Talk (PTT) button.• To receive calls, release the PTT button.Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance).Exposure to Radio Frequency EnergyYour Motorola radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy:6864110W13o.book  Page 9  Tuesday, January 21, 2003  4:28 PM
Draft• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999• Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2001 (applicable to wireless phones only)• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2002) “additional requirements for SMR, cellular, and PCS product certification.”To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures.6864110W13o.book  Page 10  Tuesday, January 21, 2003  4:28 PM
DraftPortable Radio Operation and EME ExposureAntenna CareUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations.DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects the effective range.Two-Way Radio OperationWhen using your radio as a traditional two-way radio, hold the radio in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.Body-Worn OperationTo maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the radio held in the normal use position, ensure the radio and its antenna are at least one inch (2.5 cm) from your body when transmitting.6864110W13o.book  Page 11  Tuesday, January 21, 2003  4:28 PM
DraftData OperationIf applicable, when using any data feature of the radio with or without an accessory cable, position the radio and its antenna at least one inch (2.5 cm) from the body.Approved AccessoriesFor a list of approved Motorola accessories visit our website at www.mot.com.Electromagnetic Interference/CompatibilityNote:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.Medical Devices - PacemakersThe Advanced Medical Technology Association recommends that a minimum separation of six inches (15 cm) be maintained between a handheld wireless radio and a pacemaker. These 6864110W13o.book  Page 12  Tuesday, January 21, 2003  4:28 PM
Draftrecommendations are consistent with the independent research by, and recommendations of the U.S. Food and Drug Administration.Persons with pacemakers should:• ALWAYS keep the radio more than six inches (15 cm) from their pacemaker when the radio is turned ON.• Not carry the radio in the breast pocket.• Use the ear opposite the pacemaker to minimize the potential for interference.• Turn the radio OFF immediately if you have any reason to suspect that interference is taking place.Medical Devices - Hearing AidsSome digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.Safety and General Use While DrivingCheck the laws and regulations on the use of radios in the area where you drive. Always obey 6864110W13o.book  Page 13  Tuesday, January 21, 2003  4:28 PM
Draftthem. When using your radio while driving, please:• Give full attention to driving and to the road.• Use hands-free operation, if available.• Pull off the road and park before making or answering a call if driving conditions so require.Operational WarningsFor Vehicles with an Air BagDo not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio may be propelled with great force and cause serious injury to occupants of the vehicle.Potentially Explosive AtmospheresTurn off your radio prior to entering any area with a potentially explosive atmosphere, unless it is a radio type especially qualified for use in such areas as “Intrinsically Safe.” Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.Note:The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or 6864110W13o.book  Page 14  Tuesday, January 21, 2003  4:28 PM
Draftchemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.Blasting Caps and AreasTo avoid possible interference with blasting operations, turn off your radio when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Operational CautionsAntennasDo not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.BatteriesAll batteries can cause property damage and/or bodily injury such as burns if a conductive material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.6864110W13o.book  Page 15  Tuesday, January 21, 2003  4:28 PM
DraftBattery Charger Safety InstructionsSave these Instructions1. Do not expose the charger to rain or snow.2. Do not operate or disassemble the charger if it has received a sharp blow, or has been dropped or damaged in any way.3. Never alter the AC cord or plug provided with the unit. If the plug will not fit the outlet, have the proper outlet installed by a qualified electri-cian. An improper condition can result in a risk of electric shock.4. To reduce the risk of damage to the cord or plug, pull the plug rather than the cord when disconnecting the charger from the AC recep-tacle.5. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any maintenance or cleaning.6. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or personal injury.7. Make sure the cord is located so it will not be stepped on, tripped over, or subjected to dam-age or stress.8. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and/or electric shock. If an extension cord must be 6864110W13o.book  Page 16  Tuesday, January 21, 2003  4:28 PM
Draftused, make sure that:• The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.• The extension cord is properly wired and in good electrical condition.• The cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet.9. The supply cord of this charger cannot be replaced. If the cord is damaged, call Motorola Product Services at 1-800-353-2729 in the USA or 1-888-390-6456 TTY (Text Telephone).6864110W13o.book  Page 17  Tuesday, January 21, 2003  4:28 PM
Draft•  Motorola QualityShock, drop, and temperature tested to meet Motorola's high quality standards.•  Talk Confirmation ToneSignals others you are finished talking.•  Low Battery AlertAudible tone tells you when your radio's battery is running low.•  Weather ResistantHelps protect radios against the elements.•  1 Year Limited WarrantyFor warranty details, call 1-800-353-2729.•  User's Guide IncludedPWARNING CHOKING HAZARD SMALL PARTSNot for children under 3 years.This product is not intended to be used as a toy or playthingMOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.© Motorola, Inc. 20036864110W13o.book  Page 17  Tuesday, January 21, 2003  4:28 PM

Navigation menu