Giant Electronics T7400 FRS/GMRS Two Way Radio User Manual

Download:
Mirror Download [FCC.gov]
Document ID	462636
Application ID	TyP4tnJtNvSYYeS2aECzoA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.27kB (1665829 bits)
Date Submitted	2004-08-24 00:00:00
Date Available	2004-08-24 00:00:00
Creation Date	2004-08-02 11:26:30
Document Lastmod	2004-08-02 11:54:28
Document Title	Users Manual
Document Creator	HP 9100C Digital Sender
Document Author:	AGNES CHAN

Models T7400, T7450
Contents
Safety and General Information 2 Changing your Radio's Settings
Setting the Channel
FCC Licensing |nformation..........,...................‘.10 Setting the Interference Eliminator Code
Push To Talk Time Out Timer
.11 Setting the Call Tone
11 Scanning
.11 Advanced Scan .
.12 Hands-free Use (VOX/iVOX
12 Setting the Sensitivity Level 25
.13
.13 Using Accessories ......
.14 Ear-piece with Push-To-Talk Microphone
Getting Started ............
Turning On/Off Your Radio
Installing Batteries
NiMH Battery Installation.
AA Alkaline Battery Installation.
Battery Meter
Battery Life.
Battery Drop-In Charging Tray
Ear-piece with Boom Microphone .................. 26
Control Buttons .................................................. 15
Weather
Operating ............................................................ 16 Setting the Weather Channels.
Talk Range ........... .16
Accessing the Backhght .17 Use and care ...................................................... 29
Lock .17
Monitor .17 Troubleshooting . ................. 30
"Roger” Beeps/Talk Confirma ion one . .18
Button Beeps ...................................... .18 Copyright Information ...................................... 32
T7400 Frequency and Code Charts .19 Warranty ............................................................ 33
Contents
1.1
a.
i.—
(9
(B
>.
G)
“—
(B
U)
Safety and General Information
Important Information on Safe and Efficient Operation
Read This Information Before Using Your Radio,
The information provided in this document supersedes the general safety
information in user guides published prior to December 1, 2002.
Transmit and Receive Procedure
Your two-way radio contains a transmitter and a receiver. To control your
exposure and ensure compliance with the general population/uncontrolled
environment exposure limits, always adhere to the following procedure:
. Transmit no more than 50% of the time.
- To transmit (talk), press the Push to Talk (P'I'I') button.
~ To receive calls, release the PTT button.
Transmitting 50% of the time, or less, is important because the radio generates
measurable RF energy exposure only when transmitting (in terms of measuring
standards compliance).
Exposure To Radio Frequency Energy
Your Motorola two-way radio complies with the following RF energy exposure
standards and guidelines:
- United States Federal Communications Commission, Code of Federal
Regulations; 47CFR part 2 sub-part J
- American National Standards Institute (ANSI) / Institute of Electrical and Electronic
Engineers (IEEE) C95. 1—1992
- Institute of Electrical and Electronic Engineers (IEEE) 095.1-1999 Edition
- International Commission on Non«|onizing Radiation Protection (ICNIRPl 1998
- Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to
Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300
GHz, 1999
- Australian Communications Authority Radiocommunications (Electromagnetic
Radiation --» Human Exposure) Standard, 2003
- ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limitation of
exposure to electrical, magnetic and electromagnetic fields in the radio frequency
range between 9 KHz and 300 GHz“ and “Attachment to resolution # 303 from July
2, 2002“
To assure optimal radio performance and make sure human exposure to radio
frequency electromagnetic energy is within the guidelines set forth in the above
standards, always adhere to the following procedures.
Portable Radio Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized
antennas,modifications, or attachments could damage the radio and may violate
FCC regulations.
DO NOT hold the antenna when the radio is ”IN USE.” Holding the antenna affects
the effective range.
in:
(B
i.—
a.
d)
d)
L'J
EB
>.
+0
0.)
w-
(I)
.9
4.»
i-
u-
03
d)
(D
q.‘
u-
(U
(I!
Two-way Radio Operation
' 34 When using your radio as a traditional two»way radio, hold the radio in
a vertical position with the microphone 1 to 2 inches (2.5 to 5 cm)
away from the lips.
Body- Worn Operation
To maintain compliance with FCC/Health Canada RF exposure guidelines, if you
wear a radio on your body when transmitting, always place the radio in a Motorola-
supplied or approved clip, holder, holster, case, or body harness for this product.
Use of non-MotoroIa-approved accessories may exceed FCC/Health Canada RF
exposure guidelines.
If you do not use one of the Motorola-supplied or approved body-worn accessories,
and are not using the radio held in the normal use position, ensure the radio and its
antenna are at least 1 inch (2.5 cm) from your body when transmitting.
Data Operation
If applicable, when using any data feature of the radio with or without an accessory
cable, position the radio and its antenna at least 1 inch (2.5 cm) from the body.
Approved Accessories
For a list of approved Motorola accessories, visit our website at www.MotoroIa.com.
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to electromagnetic interference
(EIVII) if inadequately shielded, designed, or otherwise configured for electro-
magnetic compatibility.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your
radio in any facility where posted notices instruct you to do so. Hospitals or health
care facilities may be using equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio when on board an aircraft. Any use
of a radio must be in accordance with applicable regulations per airline crew
instructions.
Medical Devices - Pacemakers
The Advanced Medical Technology Association recommends that a minimum
separation of 6 inches (15 cm) be maintained between a handheld wireless radio
and a pacemaker. These recommendations are consistent with the independent
research by, and recommendations of the U.S. Food and Drug Administration.
Persons with pacemakers should:
' ALWAYS keep the radio more than 6 inches (15 cm) from their pacemaker when
the radio is turned ON.
- Not carry the radio in the breast pocket.
° Use the ear opposite the pacemaker to minimize the potential for interference.
~ Turn the radio OFF immediately if you have any reason to suspect that
interference is taking place.
.9
id
l.—
Tc
3-
dd
“U
<0
>.
qua
(D
N‘—
U)
1;
‘5
I.—
d.)
G.)
(D
“U
IE
>.
1.4
d)
u...
(U
(I)
Medical Devices - Hearing Aids
Some digital wireless radios may interfere with some hearing aids. In the event
of such interference, you may want to consult your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your
device to determine if it is adequately shielded from RF energy. Your physician
may be able to assist you in obtaining this information.
Safety and General Use While Driving
Check the laws and regulations on the use of radios in the area where you drive.
Always obey them. When using your radio while driving, please:
- Give full attention to driving and to the road.
~ Use hands-free operation, if available.
- Pull off the road and park before making or answering a call if driving
conditions so require.
Operational Warnings
For Vehicles with an Air Bag
Do not place a portable radio in the area over an air bag or in the air bag deploy-
ment area. Air bags inflate with great force. lf a portable radio is placed in the air
bag deployment area and the air bag inflates, the radio may be propelled with
great force and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio prior to entering any area with a potentially explosive
atmosphere, unless it is a radio type especially qualified for use in such areas as
”intrinsically Safe."
Do not remove, install, or charge batteries in such areas. Sparks in a potentially
explosive atmosphere can cause an explosion or fire resulting in bodily injury or
even death
Note: The areas with potentially explosive atmospheres referred to above include
fueling areas such as below decks on boats, fuel or chemical transfer or
storage facilities, areas where the air contains chemicals or particles, such
as grain, dust, or metal powders, and any other area where you would nor-
mally be advised to turn off your vehicle engine. Areas with potentially
explosive atmospheres are often but not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your radio when
you are near electrical blasting caps, in a blasting area, or in areas posted: ”Turn
off two-way radio." Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable radio that has a damaged antenna. If a damaged antenna
comes into contact with your skin, a minor burn can result
1.1
(B
a.
u.
5.
“<6
OJ
(D
"5
4.1
G)
q.
(5
U)
\l
id
(5
i-
H—
a.
(D
d)
(D
'U
10
>.
Q-l
d.)
“—
U)
Batteries
All batteries can cause property damage and/or bodily injury such as burns if a
conductive material such as jewelry, keys, or beaded chains touch exposed termi—
nals. The conductive material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged battery, particularly
when placing it inside a pocket, purse, or other container with metal objects.
Battery Charger Safety Instructions
Save these Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate or disassemble the charger if it has received a sharp blow, or
has been dropped or damaged in any way.
3. Never alter the AC cord or plug provided with the unit. If the plug will not fit
the outlet, have the proper outlet installed by a qualified electrician. An
improper condition can result in a risk of electric shock.
4. To reduce the risk of damage to the cord or plug, pull the plug rather than the
cord when disconnecting the charger from the AC receptacle.
5 To reduce the risk of electric shock, unplug the charger from the outlet before
attempting any maintenance or cleaning.
6. Use of an attachment not recommended or sold by Motorola may result in a
risk of fire, electric shock, or personal injury.
7.
8.
Make sure the cord is located so it will not be stepped on, tripped over, or
subjected to damage or stress.
An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in a risk of fire and/or electric shock. If an
extension cord must be used, make sure that:
- The pins on the plug of the extension cord are the same number, size and
shape as those on the plug of the charger.
- The extension cord is properly wired and in good electrical condition.
- The cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for lengths up
to 150 feet.
. The supply cord of this charger cannot be replaced. If the cord is damaged, call
Motorola Product Services at 1-800-353-2729 in USA or 1-888-390-6456 "I'I'Y
(Text Telephone).
1.4
(B
u-
Tu
d)
d.)
(D
(B
1.1
d)
n...
U)
a.-
(U
L-
u.
U)
(I)
OJ
_|
LI-
FCC Licensing Information
Your Motorola radio operates on General Mobile Radio Service (GMRS) frequen-
cies and is subject to the Rules and Regulations of the Federal Communications
Commission (FCC). The FCC requires that all operators using GMRS frequencies
obtain a radio license before operating their equipment. To obtain the FCC forms,
please request Form 6—05 and £9, which includes all forms and instructions. If
you wish to have the document faxed or mailed, or have questions, please use
the following contact information.
Faxed Mailed Questions
Contact the Fax-On- Call the FCC forms Regarding FCC license
Demand system at: hotline at: Contact the FCC at:
1 -883-CALL-FCC
1-833-225-5322
Or: http:l/www.fcc.gov
1-800-418-FORM
1-202-418-0177 1-800-418-3676
Changes or modifications not expressly approved by Motorola may void the user's
authority granted by the FCC to operate this radio and should not be made. To
comply with FCC requirements, transmitter adjustments should be made only by
or under the supervision of a person certified as technically qualified to perform
transmitter maintenance and repairs in the private land mobile and fixed services as
certified by an organization representative of the user of those services. Replacement
of any transmitter component (crystal, semiconductor, etc.) not authorized by the
FCC equipment authorization for this radio could violate FCC rules.
Note: Use of this radio outside the country where it was intended to be distributed
is subject to government regulations and may be prohibited.
Getting Started
Turning OnIOff Your Radio
Turn .
Knob Display Normal Menu Mode
T7400 Display icon when the switch ispowered ON
Turn Knob on the top of the radio clockwise to use.
Turn the Knob counterclockwise to turn the radio
OFF. The radio chirps and displays all feature icons
that your radio has available for approximately one
second.
Keypad Lock
Scan
HVL" POW” 1?!) “Pa 2») Talk Confirmation
Battery Meter QT:“,: ' "_ “z‘ Interference
Quick»TaIk ll: “Z‘ Eliminator Code
Weather §"- J'((‘ J Vibra-Call
Channel indicator Xixwfitahngfxfifiout
Installing Batteries accessories
Some radio packages include a rechargeable Nickel-Metal Hydride lNiMH) battery,
or you may use 4 AA Alkaline batteries. If you would like to obtain the battery, the
charger or the Rechargeable Upgrade Kit, please contact place of purchase.
”5
G)
1-1
(E
4-
VJ
51
4.1
4-1
(D
(D
1-0
h-
1.1
(I)
U)
T;
4.-
d)
(D
NiMH Battery Installation
Your radio uses one rechargeable Nickel—Metal Hydride Battery pack. These cells
Receive, 90% Standby).
~ To begin, slide the Ribbed Latch on the bottom of the .
radio away from the back cover, or toward the contacts.
- Slide and lift the back cover off. ’ '
the charge contacts are facing the bottom of the radio. ME "I
Insert the top of the battery into the radio and push the
battery up and into the battery compartment to fit tightly
into place.
AA Alkaline Batteries Installation
Your radio also uses 4 AA alkaline batteries. These cells
provide 22 hours of radio use. Based upon 5/5/90 duty
cycle.
from the battery door.
- Slide and lift the battery door off.
- Place AA batteries so that the + markings match the
markings in the compartment.
provide 13 hours of radio use; based upon 5/5/90 duty cycle (5% Transmit, 5%
- Position the battery with the Motorola Logo side up, and F
- Slide and snap the cover back into place.
. Push the Ribbed Latch on the bottom of the radio away
- Slide and snap the battery cover into place.
Battery Meter
The battery meter located in the upper left corner of the display indicates how
much battery power you have.
NiMH/Alkaline %
The radio will power off when the voltage drops below a predetermined level in
order to protect the rechargeable battery. When the battery meter flashes; -.;'_'_,._é ,
the radio chirps after releasing 6) and every 5 minutes.
Battery Life
The following chart lists the appropriate battery life during Two-way Use* for
Alkaline and NiMH batteries.
Battery Type Two—way Use”
AA Alkaline (High Capacity) 22 Hours
Motorola NiMH Battery-pack 13 Hours
"U
G!
1.-
1.4
U)
U,
5.3
1-1
Q)
*Two-way Use is defined as 90% standby time, 5% talk time, and 5% receive time.
Note: Use of Scan, VOX, Weather and other features may reduce Battery Life.
”C
d)
1-
(5
+1
U)
U)
1°:
Q-I
a.)
(D
Battery Drop-In Charging Tray
The Drop-In Charging Tray can be placed on
any flat surface and provides drop-in charging
convenience.
- Connect Plug-in Charger and Drop-In Charging
Tray by inserting the pin into the rear of Drop-
In charging tray, insert pin as far as possible,
then stop.
~ To charge the battery, place the radio into
Drop-In Charging Tray with the front of the
radio facing toward you.
Note: The battery can be charged while inside
the radio or separately. The battery’s
silver contacts must face down and the
Motorola Logo must face the front of
Charger.
The light on the Plug-in Charger will glow
continuously when radio/battery is inserted.
Note: Allow up to 10 hours for the battery to
reach full charge.
Plug-in
Charger
Pin
Drop-In
Charging
Tray
Control Buttons
Indicator Light
Use 6") to
Talk/Exit
a menu
Use (D to
Transmit
call tone
Speaker
Accessory cover/flap
Use {FE (power) to
Turn power On/Off and
Adjust volume
Use ®and etc
scroll through menu
settings/ Change
Channels
Use to
Turn Scan On/Off
Use 69 to
Scroll through menus
Look the keypad (when
held down & not in
menu)
Microphone
(h
find
4-1
on
“o
L-
4.1
Operating
16
Operating Your T7400
Note: The microphone is located on the front of your radio, please refer to the
diagram on page 18.
- Press and hold @ .
34 ~ Talk two—to-three inches away from the microphone.
- When you’re finished talking, release @ .
While transmitting, the red indicator light located above the display, glows.
Talk Range
,>>>>>>>)>> 0 W: . n) .
Medium Range Minimal Range
Optimal Range Buildings or trees Dense foliage or mountains
Flat, open areas , Outdoor - Outdoor
- Outdoor Also near residential Also inside some buildings
buildings , Indoor
Accessing the Backlight
Your radio has a Backlight that turns On automatically any time you press a front
button lexcept ®and Q) l. The Backlight turns Off automatically five seconds
after you last pressed a front button.
Lock
- To avoid accidentally changing radio operation, press for three seconds.
Now you will see a .
' The Look Feature Iocks@,@and @, and Scan functions.
When the keypad is locked ou can still adjust the volume, transmit@, send a
Call Tone®, and monitor (Long Press).
- To unlock, press ‘for three seconds.
Monitor
allows you to listen to all activity on a Channel to tell whether the Channel is
currently in use. .can also help you determine when a radio is moving out of
range.
Operating
17
U,
q.-
(5
(D
Q.
"Roger" Beeps/Talk Confirmation Tone
When you turn this feature On, your two-way radio transmits a unique tone when
you finish transmitting. It’s like saying ”Roger” or "Over” and lets others know
you have finished talking. If the person you are talking to does not hear the talk
confirmation tone, you can enable it by pressing and holding ®as you turn On
your radio. Now, whenever you release 6, you let your friends know you have
finished talking by transmitting a “Roger" Beep tone. "Roger" Beeps will be
disabled as the Default Setting.
Note: To toggle the Talk Confirmation Tone feature, turn your radio Off and then
back On while pressing and holding (9.
Button Beeps
Every time you press a button on the front of your radio, it beeps unless you turn
Button Beeps Off. To turn Button Beeps Off, turn your radio On while you press
and hold G). To turn Button Beeps back On, turn the radio Off and then back
On again while you press and hold 6. On is the Default setting.
mr e ESE szw ammo“? £5 83mm: 3.0 m—
m KNEE meO 88‘qu 9:6 884m: 36 2
m 35:5. mmEu omnmdmw was». omnm.~me mad 2
P twain. mac/E 08mm: 9.36 83qu 36 mp
J..— 2. man mmgflww val.— MNFKS 36 3
film 2. mum mnmmfiwv E mnmwflmv mmé mp
b 2 wE mwwwflme wE mmmwsow and E
n 2 m5 mwmmsmq m: mnmmfime 36 Z
3 9 m5 mfiofiwv E £5.an 3.0 o—
w m mil mummfiwv mE mnwmfiwe 3.0 m
.A m mmm mwwmsg vE mnmm.§ 3.0 w
9 N REESE. mafia? mum mmidg E20 mmidoq 86 a
U o 53:29:— wxEQm mam 9&ng vase mSmAuov mad w
p m _ GEES mmEQm wmu mmwwdwv was mwwwdwe «6.0 m
3 e 35225 9220: wmm mnwmdfi £6 £8de 86 v
0 m REESE. meQm wmu 35de ”Eu 35.qu 8.0 m
D- N 55332. was—ON wxm m5mdmv vase mummdoe 86 N
3 _. 5553.5 mafia: mm; mummdg 92a mmwmdoe mmé _.
N m m N
nU-J 5525va 3“.de wk“. mmwynfiv 3“.de wt“. >Nrawuwo EMMMMW
E mimumm «2552» 5:22...
u.
S $068 mm“. Ucm meO
550 55> 868 $3.92 5825... £9822 9.63 5:3 5:3: 8m 2550 wmmf.
dcsmctEE EzfizmQEou mUS ucm 35:5: 2336 $me 32: co 25:0 9;
25:0 250 tan 55:09".
mhwdw— wX>> mwvfimp 39>
mwmdop 39> mhvdwr mX>>
ocmdw— wX>> oovflop NX>>
omvNE mX>> ommNcP FX>>
a: . BEES n: , BEES
355 mi amp—Sm?) 355 E... hmfimw;
3.25332". wen mic-5:0 5533
a:
In
Du
D.
u.
m 3955 $56 Swag E5 SNRQ 93 mm
h 2955 236 82,2: 25 82.2: 3.0 a
a germ $50 85,qu $5: 85m: 8.0 on
m 55:1 $56 85.qu ”Eu 83.me 2,0 2
N: V 32.33 R v
cczatommc firm: vi 330m REM“. PI >mfimwm Eummmw
memowm zEmcmfi zEmcmfi
Note: Your radio will only communicate with radios set to the same Channel
and Interference Eliminator Code.
Changing your Radio's Settings
Setting the Channel
- Turn radio On.
- To set, press once the Channel display begins to flash.
~ Then press®or®to choose the Channel.
- Press to exit this menu.
Note: The red indicator light above the display flashes every
second when the Channel is in use.
Setting the Interference Eliminator Code
Interference Eliminator Codes help minimize interference by
providing a choice of code combinations. Your radio has 99 \ /
Interference Eliminator Codes. Codes 1-38 are the standard T
codes that appear on other FRS/GMRS radios. Codes 3999
are additional digital codes added for superior interference
protection.
To set the code for a channel:
1. Press .until the code starts to flash.
2. Press ®or etc select the code.
3. Press @ to save the code setting.
(I!
51
1.1
1a
(D
J!)
1:
n:
.E
(5
.:
_\
(I!
U)
3:
0)
U)
J!)
.9
'5
U)
.s
O)
You can set a different code for each channel using this procedure. An extended
press of ®of @ allow you to scroll through the Interference Eliminator Codes
rapidly so you can quickly reach the code you want.
Note: You must set the Interference Eliminator Code to D on a radio that uses
Interference Eliminator Codes to communicate with radios that do not have
Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press 6) for 60 continuous
seconds.
Setting the Call Tone
Your radio can transmit different individual call tones to other
radios in your group so you can alert the group that you want
to talk to them. There are ten distinct individual call tones to
choose from and you can also turn Call Tones Off by selecting
Call Tone D. Once selected, press ®to transmit the Call Tone
to others.
To set your Call Tone:
~ Turn radio On.
- Press .3 times as needed to display: [FL
- You can press and hold ®or@to scroll through the available call tones. The
radio plays a sample of each individual Call tone as you scroll through them.
~ The default is set on .',or you may choose [Ha
Scanning
By using ., you can monitor Channels and Codes for transmissions and lock in on
the one that interests you. More importantly, you can find someone in your group
who has accidentally changed Channels and is talking during your scan. You don’t
have to set a new Channel or Code, the radio just resets itself temporarily to that
Channel and Code and you can start talking.
- To start scanning, briefly press (5).
Your Channel/Code screen displays Z and begins to scroll through Channels.
When the radio detects channel activity, it stops on that channel and displays its
Channel and Code. You can talk to the person(sl transmitting without having to
switch Channels by pressing@.
- To stop scanning, briefly press @.
If you press.while the radio is scanning, the radio will transmit on the Channel
which was selected before you activated Scan.
If no transmission occurs within five seconds, scanning will resume.
Advanced Scan
If Scan stops on a Channel that you don't want, briefly press (9 to resume
scanning for the next active Channel in the Scan List.
Scan Nuisance Delete
If Scan continuously stops on an undesired Channel, hold press Game key for
(h
07
in:
(D
J!)
"C
a.
57
U)
(U
.C
U)
51
3:
fi
0)
u:
30
1:
(U
n:
l-
>.
31
51
2 seconds. This will temporarily remove the undesired Channel from being
scanned. To restore the deleted Channel, turn Scan Off by pressing ., then turn
Scan back On by pressing @ again.
Note: Your Home Channel is the Channel your radio was set to when you activated
Scan. You cannot Nuisance Delete your Home Channel.
Hands-Free Use/VOX
With Compatible VOX Accessories
- Turn radio Off.
- Open Accessory Cover.
- Insert plug of audio accessory firmly into
Accessory Jack.
- Turn radio On. Radio will display: «If.
- Lower radio volume BEFORE placing accessory on
head or in ear.
' To transmit, speak into Accessory Microphone and to
receive, stop talking.
- VOX operation can be disabled by pressing ®or removing audio accessory.
Note: There is a short delay between when you start talking and when the radio
transmits. To order accessories, please contact the point of purchase.
Handsfree Use Without Accessories (iVox)
You can use the iVox feature to transmit handsfree without the need for any voice
activation (VOX) accessories. Once iVOX is turned on, the radio detects your voice
and transmits when you speak.
1. Turn the radio off.
2. Turn the radio on while pressing 6. «fdisplays.
3. To temporarily disable iVox, press 6. afflashes intermittently.
4. To turn off iVox, turn the radio off.
Setting Sensitivity Level
Adjusting your radio's Sensitivity Level helps minimize the possibility of
unintended noises triggering a transmission, or enhances the ability to pick up
quiet voices.
- Press.4 times as needed to displaymf . The radio will also display the
sensitivity type you are setting:
- Select Sensitivity Level of l' , E' , 3 or by using 6 or G):
l: High Sensitivity, for quiet environments
E: Medium Sensitivity, for most environments
31 = Low Sensitivity, for noisy environments
Note: There is a short delay between when you start talking
and the radio transmits.
(I)
U)
(D
(D
in
"5
I“
l-
>.
01
51
.C
01
':
(0
cu
Using Accessories
Make sure the radio is turned Off before plugging audio accessories into the
accessory port. Before you place an accessory on your head or in your ear, turn
the volume down. To order accessories, please contact the point of purchase
Ear-piece with Push-To-Talk Microphone
Discreet, lightweight ear-piece with hand»operated lapel or collar-mounted
microphone. It allows clear communication without disturbance or interference.
Ear-piece with Boom Microphone
Discreet, lightweight ear-piece which fits comfortably around the ear while
boom microphone allows for remote radio placement and is VOX/Hands-free
compatible
Weather
Your radio can tune in to broadcasts by the United States National Oceanic and
Atmospheric Administration (NOAA) Weather Radio and Environment Canada
Weatheradio.
You can listen to a weather channel or set your radio to alert you to emergency
weather broadcasts that interrupt routine broadcasts.
When you listen to weather channel, you cannot use your radio in scan mode or
for two»way communications.
Both NOAA and Environment Canada have transmitters located throughout the
United States and Canada, respectively. These transmitters broadcast watches,
forecasts, and other information 24 hours a day.
Note: NOAA weather radio stations are assigned to cover specific areas and
service may be limited. Please check with your local weather office for
frequency and details, or visit www.nws.noaa.gov/nwr in the US or
www.msc«smc.ec.gc.ca/cd/factsheets/wxradio in Canada to view the
appropriate transmitter for your area. The use of the NOAA logo does not
provide an endorsement or implied endorsement by NOAA’s National
Weather Service, nor does the use of the Weatheradio logo provide an
endorsement or implied endorsement by Environment Canada.
Turning Weather Channel Reception On and Off
To turn weather reception on, press and hold ®for 3 seconds. To turn off, press
and hold ®for 3 seconds, or turn the radio off and then back on.
Weather
27
Weather
28
Setting the Weather Channel
Your radio receives 8 weather frequencies (see page 19).
1) After turning weather reception on, press .. The current channel flashes.
2) Press fiber @to select the channel.
Setting the Weather Alert
1) After turning weather reception on, press twice. “A" displays.
2) Press ®or eto select Y lONl.
If you activate Weather Alert and return to two-way mode, l~’\({>will display.
As with two-way radio reception, weather channel reception depends on how
close you are to a transmitter and whether you are indoors or outdoors. Because
weather channels are transmitted without codes, they may contain static or noise.
Use and Care
Use a soft damp cloth
to clean the exterior.
If the radio gets wet...
|@
Turn it off and
remove batteries.
Do not immerse
in water.
Dry with soft cloth.
Do not use alcohol or
cleaning solutions.
Do not use until
completely dry.
Use and Care
29
U)
+4
J:
In
.Q
l—
Troubleshooting
Reposition or replace Alkaline batteries.
N .
0 power Recharge or replace N|MH battery.
Message "01 Make sure @is completely pressed as you transmit.
transmitted Reposition, replace or recharge batteries.
Hearing other Confirm Interference Eliminator Code is set.
is . .
ggnvisrsation on Shared Channel or Interference Eliminator Code may
be in use, try another.
a Channel
Steel and/or concrete structures, heavy foliage, use in
buildings or vehicles decrease range. Check for clear
line of sight to improve transmission.
Wearing radio close to body such as in a pocket or on
a belt decreases range. Change location of radio.
Limited talk range
Troubleshooting
Confirm radios have the same Channel and
Interference Eliminator Code settings.
Message not Make @ sure is NOT being pressed while trying to listen.
Received Reposition, replace, or recharge batteries. 51
Obstructions and operating indoors, or in vehicles, 5
may interfere -- change location. 5
Heavy static Radios are too close, they must be at least five feet apart. 1:
. . . . (I:
or intereference Radiosare too far apart or obstacles interfering wtth d)
transmisswn. _
Make sure keypad is unlocked. Unlock by pressing @ O
Keypad locked for three seconds. h
|_
Recharge or replace NiMH battery. Replace AA
Low batteries batteries. Extreme operating temperatures affect
battery life.
Feature not set and On. You can also increase the
Cannot activate VOX Sensitivity Level. Please refer to Setting Sensitivity
Level on page 20.
..
l-
._
+-
.=
c)
':
a.
Copyright Information
Manufactured, distributed or sold by Giant International Ltd., official licensee for
this product. Motorola, the Motorola logo trademarks and the Motorola trade
dress are owned by Motorola, Inc. and are used under license from Motorola, Inc.
Please contact Giant International Ltd. at 800~638~5119 for questions/comments,
warranty, support, or service related to this product, MOTOROLA and the Stylized
M Logo are registered in the U.S. Patent 81 Trademark Office. All other product or
service names are the property of their respective owners. © Motorola, Inc. 2004.
Motorola Limited Warranty for Personal Communication
Products, Accessories and Software Purchased in the
United States or Canada
What Does this Warranty Cover? Subject to the exclusions contained below,
Motorola, Inc. or its licensees warrants its consumer two-way radios that operate
via Family Radio Service or General Mobile Radio Service (“Products"), Motorola—
branded or certified accessories sold for use with these Products (“Accessories”)
and Motorola software contained on CD-Roms or other tangible media and sold
for use with these Products (”Software") to be free from defects in materials and
workmanship under normal consumer usage for the period(s) outlined below. This
limited warranty is a consumer's exclusive remedy, and applies as follows to new
Motorola Products, Accessories and Software purchased by consumers in the
United States or Canada, which are accompanied by this written warranty:
Products Covered
A. Products as
defined above,
unless otherwise
provided for
below.
Warranty
Len -th of Covera-e Exclusions
A. One (1) year from Normal Wear and Tear. Periodic
the date of purchase maintenance, repair and
by the first consumer replacement of parts due to normal
purchaser of the wear and tear are excluded from
product unless coverage.
Batteries. Only batteries whose
fully charged capacity falls below
80% of theirrated capacity and
batteries that leak are covered by 33
this limited warranty.
otherwise provided for
below.
Warranty
34
Products Covered
1. Decorative
Accessories and
Cases. Decorative
covers, bezels,
PhoneWrapW'
covers and cases.
2. Monaural
Headsets. Ear
buds and boom
headsets that
transmit mono
sound through a
wired connection.
3. Consumer
Two-Way Radio
Accessories.
4. Products and
Accessories that
are Repaired or
Replaced.
1. Limited lifetime
warranty for the
lifetime of ownership
by the first consumer
purchaser of the
product.
2. Limited lifetime
warranty for the
lifetime of ownership
by the first consumer
purchaser of the
product.
3. Ninety (90) days
from the date of
purchase by the first
consumer purchaser
of the product.
4. The balance of the
original warranty or
for ninety (90) days
to the consumer,
whichever is longer.
Len - th of Covera - e
from the date returned
Exclusions
Abuse Q Misuse. Defects or dam-
age that result from: (a) improper
operation, storage, misuse or
abuse, accident or neglect, such as
physical damage (cracks, scratches,
etc.) to the surface of the product
resulting from misuse; (b) contact
with liquid, water, rain, extreme
humidity or heavy perspiration,
sand, dirt or the like, extreme heat,
or food; (c) use of the Products or
Accessories for commercial purpos-
es or subjecting the Product or
Accessory to abnormal usage or
conditions; or (d) other acts which
are not the fault of Motorola or
(Giant International Ltd), are
excluded from coverage.
Use of Non-Motorola branded
Products and Accessories. Defects
or damage that result from the
use of Non-Motorola branded or
certified Products, Accessories,
Software or other peripheral equip-
ment are excluded from coverage.
Products Covered
Len -th of Covera . e
Exclusions
Un horize rvice r
Mgdifimign. Defects or damages
resulting from service, testing,
adjustment, installation, maintenance,
alteration, or modification in any way
by someone other than Motorola,
(Giant International Ltd.) or its
authorized service centers, are
excluded from coverage.
Alterg Produgfi. Products or
Accessories with (a) serial numbers or
date tags that have been removed,
altered or obliterated; (b) broken seals
or that show evidence of tampering;
(c) mismatched board serial numbers;
or (d) nonconforming or non-
Motorola branded housings, or parts,
are excluded from coverage.
gommuniggtion Services. Defects,
damages, or the failure of Products,
Accessories or Software due to any
communication service or signal you
may subscribe to or use with the
Products Accessories or Software is
excluded from coverage.
Products Covered
B. Software.
Applies only to
physical defects
in the media that
embodies the
copy of the
software (e.g.
CD-ROM, or
floppy disk).
B. Ninety (90) days
from the date of
purchase.
Exclusions
So reEmb i in Ph i I
Mgia. No warranty is made that the
software will meet your
requirements or will work in
combination with any hardware or
software applications provided by
third parties, that the operation of
the software products will be
uninterrupted or error free, or that all
defects in the software products will
be corrected.
Software T Embed“ in
Physical Media. Software that is not
embodied in physical media (e.g.
software that is downloaded from
the internet), is provided ”as is"
and without warranty. embodied
in physical media (e.g. software
that is downloaded from the
internet), is provided "as is” and
without warranty.
Who is covered? This warranty extends only to the first consumer purchaser, and
is not transferable.
What will Giant International Ltd. Do? Giant International Ltd., at its option,
will at no charge repair, replace or refund the purchase price of any Products,
Accessories or Software that does not conform to this warranty. We may use
functionally equivalent reconditioned/refurbished/prepwned or new Products,
Accessories or parts. No data, software or applications added to your Product,
Accessory or Software, including but not limited to personal contacts, games
and ringer tones, will be reinstalled. To avoid losing such data, software and
applications please create a back up prior to requesting service.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
USA Canada
Two-Way Radios 1-800-638-5119 Two-Way radio 1-800-638-5119
For Accessories and Software, please call the telephone number designated
above for the product with which they are used.
You will receive instructions on how to ship the Products, Accessories or Software,
at your expense, to a Giant International Ltd. Authorized Repair Center. To obtain
service, you must include: (a) a copy of your receipt, bill of sale or other compara-
ble proof of purchase; (b) a written description of the problem; (0) the name of
your service provider, if applicable; (d) the name and location of the installation
facility (if applicable) and, most importantly; (e) your address and telephone
number.
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
Warranty
37
Warranty
38
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION
OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR
REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA
OR GIANT INTERNATIONAL LTD. BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE
PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS
OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of
incidental or consequential damages, or limitation on the length of an implied
warranty, so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights that
vary from state to state or from one jurisdiction to another.
Laws in the United States and other countries preserve for MotoroIa certain
exclusive rights for copyrighted Motorola software such as the exclusive rights
to reproduce and distribute copies of the Motorola software. Motorola software
may only be copied into, used in, and redistributed with, the Products associated
with such Motorola software. No other use, including without limitation
disassembly of such Motorola software or exercise of the exclusive rights
reserved for Motorola, is permitted
$qu
39

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:08:02 11:26:30Z
Subject                         : PVR-502W
Modify Date                     : 2004:08:02 11:54:28+08:00
Page Count                      : 40
Has XFA                         : No
Creation Date                   : 2004:08:02 11:26:30Z
Author                          : AGNES CHAN
Producer                        : 
Mod Date                        : 2004:08:02 11:54:28+08:00
Metadata Date                   : 2004:08:02 11:54:28+08:00
Creator                         : AGNES CHAN
Title                           : 
Description                     : PVR-502W

EXIF Metadata provided by EXIF.tools