Giant Telecom LYAA Two-way radio User Manual Print

Download:
Mirror Download [FCC.gov]
Document ID	2309082
Application ID	3rsWYwZnLWhP+4rxbMxMNw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.47kB (218410 bits)
Date Submitted	2014-06-27 00:00:00
Date Available	2014-06-27 00:00:00
Creation Date	2014-05-12 11:28:09
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2014-06-27 11:55:23
Document Title	Print
Document Creator	Adobe InDesign CC (Macintosh)
Document Author:	suzyfang

Body-Worn Operation
To maintain compliances with FCC/Health Canada RF exposure
guidelines, if you wear a radio on your body when transmitting,
always place the radio in a Olympia-supplied or approved clip,
holder, holster, case or body harness for this product. Use of
non-Olympia-approved accessories may exceed FCC/Health
Canada RF exposure guidelines.
Two-Way Radio
R100 Series
If you do not use one of the Olympia-supplied or approved bodyworn accessories and are not using the radio held in the normal
use position, ensure the radio and its antenna are at least 1 inch
(2.5 cm) from your body when transmitting.
Owner’s Manual
Electromagnetic Interference/Compatibility
Waterproof Radio
Note: Nearly every electronic device is susceptible to
electromagnetic interference (EMI) if inadequately shielded,
designed or otherwise configured for electromagnetic
compatibility. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Facilities
To avoid electromagnetic interference and/or compatibility
conflicts, turn off the radio in any facility where posted notices
instruct you to do so. Hospitals, health care facilities or Airports
may be using equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off the radio when onboard
on aircraft. Any use of a radio must be in accordance with
applicable regulations per airline crew instructions.
Olympia 2-Way radios are intended for recreational (consumer)
use only and are not intended for business use. Olympia offers an
alternate product designed specifically for business use - Olympia
P324 Business radio. See below for contact information.
For a list of accessories sold, please contact us.
Contact Us
For further information, call Giant International Ltd. at
1-866-537-0384, e-mail us at support@giantintl.com or visit
us on the Internet at www.olympiaproducts.com
Safety and General Information
Warning: This manual contains important safety and operating
information.
Please read, understand, and follow the instructions in this
manual. Failure to do so could result in personal injury, death, and/
or damage to the radio, accesories and/or other property.
Transmit and Receive Procedure
The Two-Way radio contains a transmitter and a receiver. To
control your exposure and ensure compliance with the general
population/uncontrolled environment exposure limits, always
adhere to the following procedure:
• Transmit no more than 50% of the time.
• To receive calls, release the Push-to-Talk (PTT) button.
• To transmit (talk), press the PTT button.
Transmitting 50% of the time, or less, is important because the
radio generates measurable RF energy exposure only when
transmitting (in terms of measuring standards compliance).
Exposure to Radio Frequency Energy
The Olympia Two-Way radio complies with the following RF energy
exposure standards and guidelines:
• United States Federal Communications Commission, Code of
Federal Regulations; 47CFR part 2 sub-part J.
• American National Standards Institute (ANSI)/Institute of
Electrical and Electronic Engineer (IEEE) C95. 1-1992.
• Institute of Electrical and Electronics Engineers (IEEE) C95.11999 Edition.
• International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1998.
• Ministry of Health (Canada) Safety Code 6. Limits of Human
Exposure to Radiofrequency Electromagnetic Fields in the
Frequency Range from 3 KHz to 300 GHz, 1999.
To ensure optimal radio performance and make sure human
exposure to radio frequency electromagnetic energy is within the
guidelines set forth in the above standards, always adhere to the
following procedures.
Portable Radio Operation and EME Exposure
Antenna Care
Use only the supplied antenna. Unauthorized antennas,
modifications, or attachments could damage the radio and may
violate FCC regulations.
Do NOT hold the antenna when the radio is “IN USE.” Holding the
antenna affects the effective range.
Medical Devices – Pacemakers
The Advanced Medical Technology Association recommends
that a minimum separation of 6 inches (15 cm) be maintained
between a handheld wireless radio and a pacemaker. These
recommendations are consistent with the independent
research by and recommendations of the U.S. Food and Drug
Administration.
People with pacemakers should:
• ALWAYS keep the radio more than 6 inches (15 cm) from their
pacemaker when the radio is turned ON.
• Not carry the radio in the breast pocket.
• Use the ear opposite the pacemaker to minimize the potential
for interference.
• Turn the radio OFF immediately if there is any reason to
suspect that interference is taking place.
Medical Devices – Hearing Aids
Some digital wireless radios may interfere with some hearing
aids. In the event of such interference, you may want to consult
your hearing aid manufacturer to discuss alternatives.
Medical Devices - Other
If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately
shielded from RF energy. Your physician may be able to assist
you in obtaining this information.
Safety and General Use While Driving
Check the laws and regulations regarding the use of radios in
the area where you drive, and always obey them. If you do use
the radio while driving, please:
• Give full attention to driving and to the road
• Use hands-free operation, if available
• Pull off the road and park before making or answering a call if
driving conditions so require
Do not place a portable radio in the area over an air bag or in the
air bag deployment area. Air bags inflate with great force. If a
portable radio is placed in the air bag deployment area and the
air bag inflates, the radio may be propelled with great force and
cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off the radio prior to entering any area with a potentially
explosive atmosphere. Only radio types that are especially
qualified should be used in such areas as “Intrinsically Safe.” Do
not remove, install or charge batteries in such areas. Sparks in a
potentially explosive atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
Note: The areas with potentially explosive atmospheres referred
to above include fueling areas such as below decks on boats,
fuel or chemical transfer or storage facilities, areas where the
air contains chemicals or particles (such as grain, dust or metal
powders) and any other area where you would normally be
advised to turn off your vehicle engine. Areas with potentially
explosive atmospheres are often—but not always—posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn
off the radio when you are near electrical blasting caps, in a
blasting area, or in areas posted “Turn off Two-Way radios.”
Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable radio that has a damaged antenna. If
a damaged antenna comes into contact with your skin, a minor
burn can result.
Display Screen Guide
Notes
• When moving between hot and cold temperatures, do not
charge the NiMH battery pack until the battery temperature
acclimates (usually about 20 minutes).
• For optimal battery life, remove the radio from the charger
within 16 hours. Do not store the radio while connected to the
charger.
• If the radio is kept on while charging, the charging time will be
extended.
• Even though the charger is connected, you may not be able
to transmit a message if the battery is completely empty
. Allow time for the battery to charge to 1 bar
before attempting to transmit a message.
Batteries
All batteries can cause property damage and/or bodily injury
such as burns if a conductive material—like jewelry, keys or
beaded chains—touch exposed terminals. The conductive
material may complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any charged
battery, particularly when placing it inside a pocket, purse or
other container with metal objects.
Battery Charger Safety Instructions:
1. Do not expose the micro-USB cable or plug to rain or snow.
2. Never alter the micro-USB cable or plug provided with the
unit. If the plug will not fit the outlet, have the proper outlet
installed by a qualified electrician. An improper condition
can result in a risk of electric shock.
3. To reduce the risk of electric shock, unplug the micro-USB
charging cable from the power outlet before attempting any
maintenance or cleaning.
4. Use of an attachment not recommended or sold by Olympia
may result in a risk of fire, electric shock or personal injury.
5. Make sure the micro-USB cable is placed where it will
not be stepped on, tripped over or subjected to damage or
stress.
FCC Licensing Information
The Olympia radio operates on General Mobile Radio Service
(GMRS) frequencies and is subject to the Rules and Regulations
of the Federal Communications Commission (FCC). The FCC
requires that all operators using GMRS frequencies obtain a
radio license before operating their equipment. To obtain the
FCC forms, please visit the FCC’s Web site at wireless.fcc.gov/
uls/index.htm?job=home to source form 605 and 159, which
includes all the instructions you will need.
If you wish to have the document faxed or mailed, or if you have
questions, please use the following contact information:
Fax: 1-202-418-0177
For Mail services: 1-800-418-3676
For FCC License Questions: 1-888-225-5322
Changes or modifications not expressly approved by Giant
Intl. Ltd. may void the user’s authority granted by the FCC
to operate this radio and should not be made. To comply
with FCC requirements, transmitter adjustments should be
made only by or under the supervision of a person certified
as technically qualified to perform transmitter maintenance
and repairs in the private land mobile and fixed services as
certified by an organization representative of the user of those
services. Replacement of any transmitter component (crystal,
semiconductor, etc.) not authorized by the FCC equipment
authorization for this radio could violate FCC rules.
You can find the label with the FCC ID on the back of the radio.
Note: Use of this radio outside the country where it was
intended to be distributed is subject to government regulations
and may be prohibited.
Control Buttons
4. The battery icon will scroll as the battery is being charged.
The scrolling icon will stop when the battery is fully charged.
Low Battery Alert
In addition to the battery meter which visually shows the current
battery charge level, the Low Battery Alert feature produces an
audible chirp when the batteries are low.
Getting Started
Waterproof
This radio is waterproof to IP-54 standards. It is dust/splashproof
from any direction. The radio is resistant to water and rain
splashes only when the battery cover, headset accessory and
micro-USB ports are sealed. Open the battery compartment door
or headset port cover only when the radio is dry. Use of a headset
accessory should be in dry environments only. The micro-USB
cable and plug is not waterproof. Do not expose the charger
to rain or snow. Charge the radios only in a dry location. The
battery door must be tightly closed with the screw to maintain the
weatherproof seal of the radio.
Installing NiMH Rechargeable Battery Pack or AA Alkaline
Batteries
1. With the radio off. Ensure that the belt clip is not attached to
the radio.
2. With the back of the radio facing you, loosen the retaining
screw on the battery door and open the cover.
3. Remove the NiMH battery pack from the clear plastic bag (do
not disassemble or unwrap the battery pack) or remove AA
batteries from its packaging.
4. Insert the NiMH battery pack with the diagram on the battery
pack facing you or insert the three AA alkaline batteries with
+ and - polarity as shown inside the battery compartment. The
ribbon should be underneath the battery pack/AA batteries
and should wrap around the right side of the battery pack for
easy removal.
5. Reposition the battery cover and press down to secure.
Radio Battery Meter
The radio battery icon shows the radio battery charge level, from
full
to empty
. When the radio has one segment left
, the radio chirps periodically or after releasing
. (see
Low Battery Alert section)
Removing the NiMH Battery Pack or AA Alkaline Batteries
1. With the radio off. Ensure that the belt clip is not attached to
the radio.
2. With the back of the radio facing you, lift the battery latch up to
release the battery cover and remove the cover.
3. Remove the NiMH battery pack or remove the AA batteries by
gently pulling the ribbon attached to the radio.
4. Reposition the battery cover and press down to secure.
Notes:
• AA Alkaline batteries are optional accessories and are sold
separately.
• Exercise care when removing NiMH or AA batteries. Do
not use sharp or conductive tools to remove either of these
batteries.
• Remove the batteries before storing the radio for extended
periods of time. Batteries corrode over time and may cause
permanent damage to the radio.
• The battery door must be tightly closed with the screw to
maintain the water resistant seal of the radio.
Using the micro-USB Charging Connector
The micro-USB charging connector is a handy port that allows
you to conveniently charge the NiMH battery pack. If using a
computer, the computer must be turned on.
1. Plug the micro-USB cable or charger into a power source as is
appropriate for your accessory.
2. Plug the cable into the micro-USB port on the bottom of the
radio.
3. An empty battery will be fully charged in 14 hours.
Attaching and Removing the Belt Clip
1. Align the belt clip post with the groove on the back of the radio
and slide it into place.
2. Gently push until the clip clicks in place.
To remove:
1. Push down on the release tab at the top of the belt clip to
release the latch.
2. Slide the belt clip away from the back of the radio.
Turning the Radio On and Off
In the ON position, the radio chirps and briefly shows all feature
icons available on the radio. The display screen then shows the
current channel, code and all features that are enabled.
1. To turn on, press and hold
and the radio beeps.
2. To turn off, press and hold
until a channel number appears
until the display goes blank.
Setting the Volume
The R100 has 16 volume levels controlled by the
or
1. Press
to increase volume.
2. Press
to decrease volume.
3. Hold
or
to rapidly increase or decrease volume.
Do not hold the radio close to your ear. If the volume is set to an
uncomfortable level, it could hurt your ear.
Transmitting and Receiving Calls
To communicate, all radios in your group must be set to the same
channel and code setting.
1. To talk, press and hold
2. When you are finished talking, release
For maximum clarity, hold the radio two to three inches away
from your mouth and speak directly into the microphone. Do not
cover the microphone while talking.
Monitor Button
Use the Monitor function to check if a channel is currently in use
by others. For maximum range performance, the Monitor function
will also help you to hear signals that are weak.
To latch the Monitor function on, press and hold
for three
seconds. When an empty channel is located, you will hear
continuous static and noise on that channel.
To turn the Monitor function off, release
icon.
Push-to-Talk
Timeout Timer
To prevent accidental transmissions and save battery life, the
radio emits a continuous warning tone and stops transmitting if
you hold
for more than 60 seconds.
Menu Options
There are 6 options you may set to your preferences. Each
press of the MENU key advances you to the next option setting.
Press the
or
keys to change the setting. The menu will
automatically close 5 seconds after the last press of any button.
After the last menu item, the radio exits MENU mode and returns
to operation of the radio. A press of the
button while setting
any menu option will immediately save all your settings and
return to operation of the radio.
R100 series
1. Channel (1-50)
2. Codes
3. Call Tone (1-10 or OFF)
4. Keypad Tones (ON/OFF)
5. Roger Beep (ON/OFF)
6. Auto Power Off (30/60/90 minutes or OFF)
Selecting the Channel
The radio has 50 channels that are compatible with all brands
of 2-Way radios. The channel is the frequency the radio uses to
transmit. (See the Channels and Frequencies table located at the
back of the manual.) Channels are shared by other radio users
and channel selection will vary based on your location. Select
a channel that is not being used from the 50 available simplex
channels. Channels 8-14 and channels 34-37 are low power
(FRS 0.5 watt). All other channels are GMRS.
1. Briefly press and release
. The channel number flashes.
2. Press
or
to select a channel.
to confirm or
to continue set up.
3. Press
Selecting the Tone/Code
This radio has 121 code settings. When a channel is in use by 2 or
more groups, this feature blocks the reception of signals that do
not carry the matching tone or code. There are 121 privacy codes.
0 is the off position, no analog or digital codes are enabled and all
users of that channel will be heard. Codes 1 – 38 are the standard
analog (CTCSS) codes that appear on other FRS/GMRS radios.
Codes 39 – 121 are additional digital (CDCSS) codes added for
superior interference protection. 0 is the off position.
See the Tone/Code Setting Frequency table located at the back of
the manual for details on tone frequencies and code values.
To set the code for a channel:
1. Press
twice until the code starts to flash.
2. Press
or
to select the code.
3. Press
to save the code setting or
to continue set up.
You can set a different code for each channel using this procedure.
An extended press of
or
allows you to scroll through the
Interference Codes rapidly so you can quickly reach the code you
want.
Note: You must set the code to 0 on a radio that uses codes to
communicate with radios that do not have Codes. Select 0 for “no
tone, no code” and OFF will flash on the radio’s display.
Setting and Transmitting Call Tones
The radio can transmit different call tones to other radios in your
group so you can alert them that you want to talk. You have 10 call
tones from which to choose.
To set a call tone:
1. With the radio on, briefly press
until
appears. The
current call tone setting flashes.
or
to change and hear the call tone.
2. Press
3. Press
to set the new call tone or
to continue set up.
To transmit your call tone to other radios set to the same channel
as the radio, press
Note: Setting the call to 0 disables the call tone feature.
Roger Beep Setting
You can set the radio to transmit a unique tone when you finish
transmitting. It is like saying “Roger” or “Over” to let others know
you are finished talking.
1. With the radio on, briefly press
until
appears. The
current setting On/Off flashes.
2. Press
or
to turn On or Off.
to set the talk confirmation tone or
to continue
3. Press
set up.
Keypad Tones
You may enable or disable the speaker keytones. You will hear the
key tone each time a button is pushed.
1. Press
until
appears. The current setting On/Off will flash.
2. Press
or
to turn On or Off.
3. Press
to confirm or
to continue set up.
Note: When the keytone feature is off, the following are not disabled:
• Transmit timeout alert tone
• Power-down alert tone
• Low battery alert tone
• The transmitted talk confirmation tone
Auto Power Off
The radio will save power by automatically turning itself off if
unused after a predetermined amount of time.
1. Activate this setting by briefly pressing
until displays.
The current setting (0, 30, 60, 90) will flash.
2. Press
or
to set the time to 30 minutes, 60 minutes or
90 minutes.
KEM-ML34901-01
3. When you exit the Menu mode, the setting timer will begin if
you are not using the radio.
4. The screen will show .
5. Press
to confirm or
to exit Menu mode.
Special Features
Keypad Lock
To avoid accidentally changing the radio settings, a keypad lock
feature may be enabled. When in lock mode, you can only turn
the radio OFF, Receive, Transmit, send a call tone, and use the
monitor function. All other functions are locked.
1. Press
and hold until
displays.
2. To unlock the radio, press and hold
until the
icon is no
longer displayed.
Scanning Channels
Use scan to search the 50 channels for transmissions from
unknown parties, to find someone in your group who has
accidentally changed channels, or to quickly find unused
channels for your own use. The “Scan” mode uses the channel
and code combinations for each of the 50 channels as you have
set them.
To start Scanning:
1. Briefly press the
key. The scan
will appear in the
display, and the radio will begin to scroll through all channel
and code combinations.
2. When the radio detects channel activity matching the channel
and code combination, it stops scrolling and you can hear the
transmission.
3. To respond and talk to the person transmitting, press
within five seconds after the end of the transmission.
4. The radio will resume scrolling through the channels five
seconds after the end of any received activity.
5. To stop scanning, briefly press the
key.
Scanning Notes
1. If you press
while the radio is scrolling through inactive
channels, the transmission will be on the “home channel”.
Scanning will resume five seconds after the end of the
transmission. You may press
to stop scanning at any time.
2. If the radio stops on an undesired transmission, you may
immediately resume the scan by briefly pressing
3. If the radio repeatedly stops on an undesired transmission,
you may temporarily remove that channel from the scan list by
for three seconds. You may remove
pressing and holding
more than one channel in this way.
4. To restore the removed channel(s) to the scan list, turn the
radio off and then back on, or exit and re-enter the scanning
mode by pressing
5. You cannot remove the home channel from the scan list.
Use With Accessories
You can transmit more reliably with the use of optional PTT
headset accessories. A PTT headset allows privacy to others
around you while listening.
1. Turn the radio off and plug the PTT accessory into the
accessory jack.
2. Turn the radio on. Press the PTT on the accessory microphone
instead of the radio.
3. Adjust the volume appropriately by pressing
. Lower
the volume before placing the accessory on your head or in
your ear.
Note:The R100 Series does not have VOX capabilities, and is only
compatible with PTT headset accessories.
Weather Receiver
This radio can tune in to broadcasts by the United States
National Oceanic and Atmospheric Administration (NOAA)
Weather Radio.
You can listen to a weather channel (see “Weather Channels
and Frequencies” table for details) or set the radio to alert
you to emergency weather broadcasts that interrupt routine
broadcasts. When you listen to a weather channel, you cannot
use the radio in scan mode or for two-way communications.
NOAA has transmitters located throughout the United States.
These transmitters broadcast watches, forecasts, and other
information 24 hours a day.
Note: NOAA weather radio stations are assigned to cover
specific areas and service may be limited. Please check with
your local weather office for frequency and details, or visit
www.weather.gov/nwr in the US to view the appropriate
transmitter for your area. The use of the NOAA logo does not
provide an endorsement or implied endorsement by NOAA’s
National Weather Service.
Turning Weather Channel Reception On and Off
1. To turn weather reception on, press and hold
for 3 seconds.
2. To turn off, press
or turn the radio off and then back on.
Scanning for Weather Channel
The radio can scan for an active NOAA transmission automatically.
1. After turning “Weather Reception” on, briefly press the
key.
2. The scan icon
will appear in the display, and the channel
will scroll through the NOAA channels 1-7.
3. When the radio detects channel activity, it stops scanning
and you can hear the transmission.
4. You may resume the scan by briefly pressing
or
5. To stop scanning, briefly press
. The scan icon
will
disappear.
Setting the Weather Channel Manually
If you know which frequency is correct for your location, refer
to the Weather Channels and Frequencies table located at the
back of the manual to manually set the radio to the appropriate
weather channel.
1. After turning Weather Reception on, press
. The current
channel flashes.
2. Press
or
to select the appropriate channel with
good reception in your area.
3. Press
to save the weather channel setting.
Setting the Weather Alert
The radio can be set to respond to NOAA Weather Radio
emergency messages. A special alarm tone sounds an alert and
turns on the weather receiver to give you immediate weather
and emergency information.
1. After turning Weather Reception on, press
twice. ON or
OFF flashes.
2. Press
or
to select ON to activate. If you activate the
Weather Alert and return to two-way mode,
will display.
3. Press
to save the Weather Alert setting.
4. Press and hold
for 3 seconds to return to two-way mode.
Package Includes
2 Olympia R100 2-Way radios, an owner’s manual as well as the
following accessories:
• 1 Y Cable micro-USB Charging Adaptor
• 2 NiMH (Rechargeable) Battery Packs
• 2 Belt Clips
• 1 Owner’s Manual
Warranty
Consumer 2-Way Radio Products and Accessories purchased
in the United States.
What Does this Warranty Cover?
Subject to the exclusions contained to the right, Giant
International Ltd. warrants the Olympia branded consumer
2-Way radios that operate via Family Radio Service or General
Mobile Radio Service that it manufactures (“Products”), the
Olympia branded or certified accessories sold for use with
these products that it manufactures to be free from defects
in materials and workmanship under normal consumer usage
for the period(s) outlined below. This limited warranty is a
consumer’s exclusive remedy, and applies as follows to new
Olympia branded Products and accessories manufactured by
Giant International Ltd., and purchased by consumers in the
United States, which are accompanied by this written warranty:
Products and Accessories as defined above, unless otherwise
provided for below:
2-Way Radios: Length of Coverage: Three (3) years from the
date of purchase by the first consumer purchaser of the product
unless otherwise provided for below.
Accessories as defined above: Ninety (90) days from the date of
purchase by the first consumer purchaser of the product.
Products and Accessories that are repaired or replaced: The
balance of the original warranty or for ninety (90) days from the
date returned to the consumer, whichever is longer.
EXCLUSIONS
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Batteries. Only batteries whose fully charged capacity falls
below 80% of their rated capacity and batteries that leak are
covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or
neglect, such as physical damage (cracks, scratches, etc.) to
the surface of the product resulting from misuse; (b) exposure
to extreme heat and cold; (c) exposure beyond the IP ratings
to liquid, water, rain, sand, dirt, dust, food, or the like, when the
battery door or accessory port seals are not closed; (d) use of
the Products or Accessories for business purposes or subjecting
the Product or Accessory to abnormal usage or conditions; or (e)
other acts which are not the fault of Giant International Ltd., are
excluded from coverage.
Use of Non-Olympia branded Products and Accessories. Defects
or damage that result from the use of Non-Olympia branded or
certified Products, Accessories, or other peripheral equipment
are excluded from coverage.
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, or modification in any way by someone
other than Giant International Ltd. or its authorized service
centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming
or non-Olympia branded housings, or parts, are excluded from
coverage.
Who is covered?
This warranty extends only to the first consumer purchaser, and
is not transferable.
What will GIANT INTERNATIONAL LTD. do?
GIANT INTERNATIONAL LTD., at its option, will at no charge
repair, replace or refund the purchase price of any Products
or Accessories that does not conform to this warranty.
We may use functionally equivalent reconditioned/refurbished/
pre-owned or new Products, Accessories or parts.
How to Obtain Warranty Service or Other Information?
To obtain service, information or to obtain a Return Authorization
(RMA) #, please call:
USA Two-Way Radios
1-866-537-0384
support@giantintl.com
You will receive instructions on how to ship the Products or
Accessories at your expense, to a GIANT INTERNATIONAL LTD.
Authorized Repair Center. To obtain service, you must include:
(a) A copy of your receipt, bill of sale or other comparable proof
of purchase
(b) A written description of the problem
(c) RMA #
(d) Your address and telephone number
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE
THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN
NO EVENT SHALL GIANT INTERNATIONAL LTD. BE LIABLE,
WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE)
FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF
OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE
THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation
on the length of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from
state to state or from one jurisdiction to another.
Channels and Frequencies
CH #
FREQ
(MHz)
CODE
TYPE
CH #
FREQ
(MHz)
CODE
TYPE
462.5625
ANY
GMRS
26
462.7125
29
GMRS
462.5875
ANY
GMRS
27
462.5500
26
GMRS
462.6125
ANY
GMRS
28
462.6000
23
GMRS
462.6375
ANY
GMRS
29
462.6500
20
GMRS
462.6625
ANY
GMRS
30
462.7000
17
GMRS
462.6875
ANY
GMRS
31
462.5875
39
GMRS
462.7125
ANY
GMRS
32
462.6375
42
GMRS
GMRS
467.5625
ANY
FRS
33
462.6875
45
467.5875
ANY
FRS
34
467.5625
48
FRS
10
467.6125
ANY
FRS
35
467.6125
51
FRS
11
467.6375
ANY
FRS
36
467.6625
54
FRS
12
467.6625
ANY
FRS
37
467.7125
57
FRS
13
467.6875
ANY
FRS
38
462.5750
60
GMRS
14
467.7125
ANY
FRS
39
462.6250
63
GMRS
15
462.5500
ANY
GMRS
40
462.6750
66
GMRS
16
462.5750
ANY
GMRS
41
462.7250
69
GMRS
17
462.6000
ANY
GMRS
42
462.5625
14
GMRS
18
462.6250
ANY
GMRS
43
462.6125
11
GMRS
19
462.6500
ANY
GMRS
44
462.6625
GMRS
20
462.6750
ANY
GMRS
45
462.7125
GMRS
21
462.7000
ANY
GMRS
46
462.5500
GMRS
22
462.7250
ANY
GMRS
47
462.6000
37
GMRS
23
462.5625
38
GMRS
48
462.6500
34
GMRS
24
462.6125
35
GMRS
49
462.7000
31
GMRS
25
462.6625
32
GMRS
50
462.5875
40
GMRS
Tone/Code Setting Frequency (Hz)
CODE
CTCSS (Hz)
CODE
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
CDCSS
(Octal)
023
025
026
031
032
043
047
051
054
065
071
072
073
074
114
115
116
125
131
132
134
143
152
155
156
162
165
172
174
205
223
226
243
244
245
251
261
263
265
271
306
311
CDCSS
(Octal)
315
331
343
346
351
364
365
371
411
412
413
423
431
432
445
464
465
466
503
506
516
532
546
565
606
612
624
627
631
632
654
662
664
703
712
723
731
732
734
743
754
CODE
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
Weather Channels and Frequencies
CHANNEL
RX (MHz)
CHANNEL
RX (MHz)
CHANNEL
RX (MHz)
WX1
162.550
WX5
162.450
WX9
161.775
WX2
162.400
WX6
162.500
WX10
161.750
WX3
162.475
WX7
162.525
WX11
162.000
WX4
162.425
WX8
161.650
Patent and Copyright Information
©2014 Giant International Limited. All rights reserved. All
registered trademarks and trade dress are the property of the
respective owners.
R100 series

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : 3.1-701
Instance ID                     : uuid:eadb281c-ff6b-4453-a72e-0453d5d94e7a
Original Document ID            : adobe:docid:indd:d344cc61-b04c-11e3-b8df-d83c68e0ec8e
Document ID                     : xmp.id:41f78cde-5ea3-4262-9abe-be0911302558
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:42d1d104-9da5-4340-a3ce-dc98b2cc1a3a
Derived From Document ID        : xmp.did:6A173D32172068118083A528BB87ED49
Derived From Original Document ID: adobe:docid:indd:d344cc61-b04c-11e3-b8df-d83c68e0ec8e
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:05:09 11:45:08-04:00
Create Date                     : 2014:05:12 11:28:09+08:00
Modify Date                     : 2014:06:27 11:55:23+08:00
Metadata Date                   : 2014:06:27 11:55:23+08:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Format                          : application/pdf
Title                           : Print
Creator                         : suzyfang
Subject                         : 
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Trapped                         : False
Page Count                      : 2
Author                          : suzyfang

EXIF Metadata provided by EXIF.tools