Giant Telecom MGAFJ WALKIE TALKIE User Manual MG160 Draft Manual 20121217

Download:
Mirror Download [FCC.gov]
Document ID	1904088
Application ID	MA3scD7IbpDxGjJQA9yqwQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.81kB (135072 bits)
Date Submitted	2013-02-21 00:00:00
Date Available	2013-02-21 00:00:00
Creation Date	2012-12-17 16:15:06
Producing Software	GPL Ghostscript 8.63
Document Lastmod	2012-12-17 16:15:06
Document Title	MG160 Draft Manual 20121217
Document Creator	PDFCreator Version 0.9.6
Document Author:	lwchan

MG160 Manual
Safety and General Information
Important Information on Safe and Efficient Operation
Read This Information Before Using Your Radio.
The information provided in this document supersedes the general safety information in user
guides published prior to December 1, 2002.
Transmit and Receive Procedure
Your two-way radio contains a transmitter and a receiver. To control your exposure and ensure
compliance with the general population/uncontrolled environment exposure limits, always adhere
to the following procedure:
• Transmit no more than 50% of the time.
• To receive calls, release the PTT button.
• To transmit (talk), press the Push to Talk (PTT) button.
Transmitting 50% of the time, or less, is important because the radio generates measurable RF
energy exposure only when transmitting (in terms of measuring standards compliance).
Exposure to Radio Frequency Energy
Your Motorola two-way radio complies with the following RF energy exposure standards and
guidelines:
• United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2
sub-part J.
• American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers
(IEEE) C95. 1-1992.
• Institute of Electrical and Electronics Engineers (IEEE) C95. 1-1999 Edition.
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range from 3 KHz to 300 GHz, 1999.
•Australian
Communications
Authority
Radio
communications
(Electromagnetic
Radiation—Human Exposure) Standard, 2003.
• ANATEL ANNEX to Resolution No. 303 of July 2, 2002 “Regulation of limitation of exposure
to electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and
300GHz”.
To ensure optimal radio performance and make sure human exposure to radio frequency
electromagnetic energy is within the guidelines set forth in the above standards, always adhere to
the following procedures.
Portable Radio Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications,
or attachments could damage the radio and may violate FCC regulations.
Do NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects its effective
range.
Body-Worn Operation
To maintain compliances with FCC/Health Canada RF exposure guidelines if you wear a
radio on your body when transmitting always place the radio in a Motorola-supplied or
approved clip holder, holster, case or body harness for this product. Use of
non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure
guidelines.
If you do not use one of the Motorola-supplied or approved body-worn accessories and
are not using the radio held in the normal use position, ensure the radio and its antenna are
at least 1 inch (2.5 cm) from your body when transmitting.
Data Operation
If applicable, when using any data feature of the radio with or without an accessory cable,
position the radio and its antenna at least one inch (2.5 cm) from the body.
Approved Accessories
For a list of approved Motorola accessories, visit our Web site at www.motorola.com.
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if
inadequately shielded, designed or otherwise configured for electromagnetic compatibility.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received, including interference that may
cause undesired operation.
IC Canada
The term "IC:" before the equipment certification number only signifies that the Industry
Canada technical specifications were met.
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in
any facility where posted notices instruct you to do so. Hospitals or health care facilities
may be using equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio when onboard an aircraft. Any use of a radio
must be in accordance with applicable regulations per airline crew instructions.
Medical Devices – Pacemakers
The Advanced Medical Technology Association recommends that a minimum separation
of 6 inches (15 cm) be maintained between a handheld wireless radio and a pacemaker.
These recommendations are consistent with the independent research by and
recommendations of the U.S. Food and Drug Administration.
People with pacemakers should:
• ALWAYS keep the radio more than 6 inches (15 cm) from their pacemaker when the
radio is turned ON.
• Not carry the radio in the breast pocket.
• Use the ear opposite the pacemaker to minimize the potential for interference.
• Turn the radio OFF immediately if there is any reason to suspect that interference is
taking place.
Medical Devices – Hearing Aids
Some digital wireless radios may interfere with some hearing aids. In the event of such
interference, you may want to consult your hearing aid manufacturer to discuss
alternatives.
Medical Devices – Other
If you use any other personal medical device, consult the manufacturer of your device to
determine if it is adequately shielded from RF energy. Your physician may be able to
assist you in obtaining this information.
Safety and General Use While Driving
Check the laws and regulations regarding the use of radios in the area where you drive,
and always obey them. If you do use your radio while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call if driving conditions so
require.
The use of a two-way radio while engaged in activities requiring concentration may cause
distraction or otherwise impair your ability to safely participate in such activities. Always
use technology safely.
Do not place a portable radio in the area over an air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable radio is placed in the air bag deployment
area and the air bag inflates, the radio may be propelled with great force and cause
serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio prior to entering any area with a potentially explosive atmosphere. Only
radio types that are especially qualified should be used in such areas as “Intrinsically
Safe.” Do not remove, install or charge batteries in such areas. Sparks in a potentially
explosive atmosphere can cause an explosion or fire resulting in bodily injury or even
death.
Note: The areas with potentially explosive atmospheres referred to above include fueling
areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas
where the air contains chemicals or particles (such as grain, dust or metal powders) and
any other area where you would normally be advised to turn off your vehicle engine. Areas
with potentially explosive atmospheres are often—but not always—posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your radio when you are
near electrical blasting caps, in a blasting area, or in areas posted “Turn off two-way
radios.” Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable radio that has a damaged antenna. If a damaged antenna
comes into contact with your skin, a minor burn can result.
Batteries
All batteries can cause property damage and/or bodily injury such as burns if a conductive
material—like jewelry, keys or beaded chains—touch exposed terminals. The conductive
material may complete an electrical circuit (short circuit) and become quite hot. Exercise
care in handling any charged battery, particularly when placing it inside a pocket, purse or
other container with metal objects.
Exercise care when removing AAA batteries. Do not use sharp or conductive tools to
remove either of these batteries.
FCC Licensing Information
Your Motorola radio operates on General Mobile Radio Service (GMRS) frequencies and
is subject to the Rules and Regulations of the Federal Communications Commission
(FCC). The FCC requires that all operators using GMRS frequencies obtain a radio
license before operating their equipment. To obtain the FCC forms, please visit the FCC’s
Web site at wireless.fcc.gov/uls/index.htm?job=home to source form 605 and 159, which
includes all the instructions you will need.
If you wish to have the document faxed or mailed, or if you have questions, please use the
following contact information:
For a fax:
Contact the
Fax-0n-Demand
system
For mail service:
Call the FCC Forms
Hotline
If you have
questions about
the FCC License:
Call the FCC
1-202-418-0177
1-800-418-FORM
(3676)
1-888-CALL-FCC
(225-5322)
Changes or modifications not expressly approved by Motorola may void the user’s
authority granted by the FCC to operate this radio and should not be made. To comply
with FCC requirements, transmitter adjustments should be made only by or under the
supervision of a person certified as technically qualified to perform transmitter
maintenance and repairs in the private land mobile and fixed services as certified by an
organization representative of the user of those services. Replacement of any transmitter
component (crystal, semiconductor, etc.) not authorized by the FCC equipment
authorization for this radio could violate FCC rules.
You can find the label with the FCC ID in the battery compartment.
Note: Use of this radio outside the country where it was intended to be distributed is
subject to government regulations and may be prohibited.
Control Buttons
Display Screen Guide
- Low Battery Icon
-Receiving
-Transmitting
-Volume
-Keypad Lock
-Scan.
Getting Started
Installing the Batteries
Each radio uses 3 AAA alkaline batteries.
Installing the Three AAA Alkaline Batteries
1. Turn the radio off.
2. With the back of the radio facing you, remove the cover.
3. Insert the three AAA alkaline batteries with + and - polarity as shown inside.
4. Reposition the battery cover and press down to secure.
Removing the Three AAA Batteries
1. Turn the radio off.
2. With the back of the radio facing you, remove the cover.
3. Gently remove each alkaline battery by easing each battery out individually.
4. Reposition the battery cover and press down to secure.
Notes:
• Exercise care when removing AAA batteries. Do not use sharp or conductive tools to
remove either of these batteries.
• Remove the Alkaline batteries before storing your radio for extended periods of time.
Batteries corrode over time and may cause permanent damage to your radio.
Attaching and Removing the Belt Clip
Hook the belt clip into the notch at the top of the radio and slide down until it clicks into
place.
To Remove
Squeeze the release latch together and slide the clip up and away from the radio.
Turning Your Radio On and Off
1. To turn on, press and hold
until a channel number appears and the radio beeps.
2. To turn off, press and hold
until the display goes blank.
Setting the Volume
1. Press the
to increase or
to decrease the volume. The volume level flashes
and “V” displays.
Do not hold the radio close to your ear. If the volume is set to an uncomfortable level, it
could hurt your ear.
Talking and Listening
To communicate, all radios in your group must be set to the same channel.
1. To talk, press and hold
2. When you are finished talking, release
For maximum clarity, hold the radio two to three inches away from your mouth and speak
directly into the microphone. Do not cover the microphone while talking.
Note: This radio does not have Interference Eliminator Codes. To communicate with
radios that use Interference Eliminator Codes, the Interference Eliminator Code must be
set to 0.
Talk Range
Your radio is designed to maximize performance and improve transmission range. Do not
use the radios closer than five feet apart.
Monitor Button
Use this feature to see if there is anyone on the channel you have selected.
1. Press and hold
to check for the channel activity.
2. When you finish listening, release the
button.
Push to Talk
Timeout Timer
To prevent accidental transmissions and save battery life, the radio stops transmitting if
you press
for 60 continuous seconds.
Menu Options
Selecting the Channel
Your radio has 22 channels.
1. With the radio on, press
. The current channel flashes.
2. Press
or
and select a channel.
3. Press
or
to confirm your selection.
Channels and Frequencies
Channel
10
11
Frequency
462.5625 MHz
462.5875 MHz
462.6125 MHz
462.6375 MHz
462.6625 MHz
462.6875 MHz
462.7125 MHz
467.5625 MHz
467.5875 MHz
467.6125 MHz
467.6375 MHz
Description Channel
GMRS/FRS
12
GMRS/FRS
13
GMRS/FRS
14
GMRS/FRS
15
GMRS/FRS
16
GMRS/FRS
17
GMRS/FRS
18
FRS
19
FRS
20
FRS
21
FRS
22
Frequency
467.6625 MHz
467.6875 MHz
467.7125 MHz
462.5500 MHZ
462.5750 MHZ
462.6000 MHZ
462.6250 MHZ
462.6500 MHZ
462.6750 MHZ
462.7000 MHZ
462.7250 MHZ
Description
FRS
FRS
FRS
GMRS
GMRS
GMRS
GMRS
GMRS
GMRS
GMRS
GMRS
Transmitting Call Tones
To transmit your call tone to other radios set to the same channel as your radio, press
Note: To receive the call tone, radios that use Interference Eliminator Codes must be set
to 0.
Special Features
Low Battery Alert
When battery is empty, the low battery icon
periodically.
Talk Confirmation Tone
will flash, and the radio chirps
Your radio transmits a unique tone when you finish transmitting. It is like saying “Roger” or
“Over” to let others know you are finished talking.
Scan
Easily finds your group’s channel by searching all channels for activity.
Start/Stop scan:
1. Press
once.
When the radio detects channel activity, it stops scanning and you hear the transmission.
To respond, press
within 5 seconds.
Keypad Lock
To avoid accidentally changing your radio settings:
1. Press and hold
until
displays.
2. When in lock mode, you can turn the radio on and off, receive, transmit, send a call tone,
and monitor channels. All other functions are locked.
To unlock the radio, press and hold
until is
no longer displayed.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 6df0cfc9-4a7d-11e2-0000-8fe995e92f24
Producer                        : GPL Ghostscript 8.63
Modify Date                     : 2012:12:17 16:15:06+08:00
Create Date                     : 2012:12:17 16:15:06+08:00
Creator Tool                    : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0000\000.\0009\000.\0006
Document ID                     : 6df0cfc9-4a7d-11e2-0000-8fe995e92f24
Format                          : application/pdf
Title                           : \376\377\000M\000G\0001\0006\0000\000 \000D\000r\000a\000f\000t\000 \000M\000a\000n\000u\000a\000l\000 \0002\0000\0001\0002\0001\0002\0001\0007
Creator                         : \376\377\000l\000w\000c\000h\000a\000n
Author                          : lwchan
Subject                         : 

EXIF Metadata provided by EXIF.tools