Gibson Innovations E700BT Bluetooth Headphones User Manual E700BT

Gibson Innovations Limited Bluetooth Headphones E700BT

E700BT User Manual

Download: Gibson Innovations E700BT Bluetooth Headphones User Manual E700BT
Mirror Download [FCC.gov]Gibson Innovations E700BT Bluetooth Headphones User Manual E700BT
Document ID2770772
Application ID4kL1sqVoRjIPqsF3s39bug==
Document DescriptionE700BT User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.6kB (369975 bits)
Date Submitted2015-10-02 00:00:00
Date Available2015-10-07 00:00:00
Creation Date2015-09-23 14:45:43
Producing SoftwareAdobe Acrobat 11.0.0
Document Lastmod2015-09-23 14:45:43
Document TitleE700BT User Manual
Document CreatorAdobe Acrobat 11.0.0

QUICK START GUIDE
E700BT
Languages x 1: EN
Box size: W95 x H150 x D25 mm
QSG size: W89 x H144 mm( Folded)
Binding: 1. Folded / 2. Glue / 3.Saddle stitch
Sleeve size: W210 x H50 mm
QSG (A1/B1) - Print color: 2 colors ( Black + PMS186c)
Revised illustration_EN (2015.07.20)
EN
Quick start guide
On/Off button,
Music/Call
control
Volume/
Track
control
Micro USB
charging slot
Microphone
LED
indicator
light
[ 1.0 Charge the battery ]
1. Plug one end of USB cable into the charger (or into the USB port of a computer).
2. Plug the other end of the cable into the micro USB charging slot on the headset.
3. When the headset is charging, a white indicator light will be displayed.
4. When the headset is fully charged, the white light goes off.
[ 2.0 Turn on and off the headset ]
1. Turn the headset on. Press and hold for 2 sec.
2. Turn the headset off. Press and hold for 4 sec. A white
indicator light turns on for 1.5 sec. and then the
headset will turn off.
[ 3.0 Pair the headset with your phone ]
E700BT
Pair the headset with your phone manually or by using NFC. After successful pairing, the
headset connects automatically to the phone once the headset is turned on and within range.
[ 3.1 Manual Pairing ]
QUICK START
GUIDE
1. Make sure your headset is turned off.
2. Press and hold until an alternating blue and white
light flashes.
10:30
Settings
Connectivity
Settings
Devices Found
Add
Bluetooth
device
Onkyo E700BT
Select
Select
Back
10:32
10:31
Settings
Bluetooth
Connectivity
Enter Password
0000
Select
4. Your phone will start searching for Onkyo E700BT.
5. Follow the on-screen instructions to pair your phone.
(Check your phone’s user manual for details)
****
Back
3. Turn on the Bluetooth function on your phone.
Back
‘0000’ not required for
some mobile phones
[ 3.2 NFC Pairing ]
1. Make sure you turn on the NFC function on your phone
and that your phone’s screen remains active.
2. Place your phone over the NFC detection area at the
back of the in-line control.
NFC detection area
3. Follow the pairing instructions of your phone. If a
passcode is required, enter ‘0000’.
Remarks:
• Make sure your mobile phone has the NFC feature and that the NFC function has been switched on and your
phone is not in standby mode.
• Pairing with NFC is suitable only for Android mobile operating system 4.2 or above.
• Refer to your phone’s user manual to identify its NFC detection area.
[ 4.0 Use music and call controls ]
www.onkyo.com
2015 © Gibson Innovations Limited.
All rights reserved.
This product has been
manufactured by, and is sold under
the responsibility of Gibson
Innovations Ltd., and Gibson
Innovations Ltd. is the warrantor in
relation to this product.
Gibson Innovations Netherlands
B.V. Building
MUSIC CONTROLS
CALL CONTROLS
Play/Pause
Press once
Pick up call/Hang up
Press once
Volume up
Press once
Reject incoming call
Skip forward
Long Press
Press & hold
for 2 sec.
Volume down
Press once
Switch caller while
in a call
Press twice
Skip backward
Long Press
Mute/unmute the mic
while in a call
Press once
[ 5.0 LED Indicator light ]
A white light triple flashes every 10 seconds.
The battery is low.
An alternating white and blue light flashes.
The headset is in pairing mode.
A blue light flashes at every 8 seconds.
The headset is both paired & connected.
A blue light flashes rapidly.
The headset is switched on but not connected.
If no connection can be made, the headset will
turn off itself after 5 minutes.
Please refer to www.onkyo.com/welcome for the full user manual
English:
Notice of compliance
The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
FCC rules
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Relocate the receiving antenna.
•
Increase the separation between equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Canada:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
Two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B)
IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
French:
Avis de conformité
Cet appareil satisfait aux règlements de la FCC partie 15 du Code of Federal Regulations. Son fonctionnement est
assujetti aux deux conditions suivantes :
1. Cet appareil ne doit pas causer d’interférence préjudiciable et
2. l’appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un
fonctionnement non désiré.
Règlement de la FCC
Cet équipement a été testé et jugé compatible avec les limites s’appliquant aux appareils numériques de la classe B,
conformément à l’article 15 du règlement de la FCC. Ces limites ont été définies pour fournir une protection
raisonnable contre les interférences nuisibles dans le cadre d’une installation résidentielle. Cet équipement génère,
utilise et peut émettre de l’énergie radiofréquence et, s’il n’est pas installé ni utilisé conformément aux instructions,
peut causer des interférences gênantes pour les communications radio.
Rien ne garantit toutefois que des interférences ne surviendront pas dans une installation particulière. Si cet
équipement cause des interférences nuisibles pour la réception de la radio ou de la télévision, ce qui peut être
déterminé en mettant l’équipement hors tension puis sous tension, l’utilisateur devra essayer de corriger ces
interférences en effectuant une ou plusieurs des opérations suivantes :
Déplacez l’antenne de réception.
Augmentez la distance entre l’équipement et le récepteur.
Branchez l’équipement à une prise d’un circuit autre que celui sur lequel le récepteur est branché.
Consultez le détaillant ou un technicien de radiotélévision expérimenté.
Canada :
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
CAN ICES-3(B)/NMB-3(B)
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des
environnements non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre
émetteur.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2015:09:23 14:45:43+08:00
Creator                         : Adobe Acrobat 11.0.0
Modify Date                     : 2015:09:23 14:45:43+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:09:23 14:45:43+08:00
Creator Tool                    : Adobe Acrobat 11.0.0
Format                          : application/pdf
Document ID                     : uuid:37ee6f9c-6932-4c28-a9e2-ddf3179dbf50
Instance ID                     : uuid:d28b2c3a-cf38-4362-9c95-5bb7f5958eee
Producer                        : Adobe Acrobat 11.0.0
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AANUE700BT

Navigation menu