Gibson Innovations H500BT Bluetooth Headphones User Manual Quick start guide H500BT 20150709 V0 6

Gibson Innovations Limited Bluetooth Headphones Quick start guide H500BT 20150709 V0 6

Contents

User manual-1

QUICK STARTGUIDEH500BTQuick start guideENwww.onkyo.com[ 1.0 Charge the battery ]1. Plug one end of USB cable into the charger (or into the USB port of a computer).2. Plug the other end of the cable into the micro USB charging slot on the headset.3. When the headset is charging, a white indicator light will be displayed.4. When the headset is fully charged, the white light goes o.1. Turn the headset on. Press and hold for 2 sec.2. Turn the headset o. Press and hold for 4 sec. A white indicator light turns on for 1.5 sec. and then the headset will turn o.Pair the headset with your phone manually or by using NFC. After successful pairing, the headset connects automatically to the phone once the headset is turned on and within range.Manual Pairing 1. Make sure your headset is turned on.2. Press and hold until an alternating blue and white light flashes.3. Turn on the Bluetooth function on your phone.4. Your phone will start searching for Onkyo H500BT.5. Follow the on-screen instructions to pair your phone. (Check your phone’s user manual for details)NFC Pairing1. Make sure your headset is turned on.2. Press and hold until an alternating blue and white light flashes.3. Make sure you turn on the NFC function on your phone and that your phone’s screen remains active.4. Place your phone over the headset so that the NFC detection area of each device touch each other.5. Follow the pairing instructions of your phone. If a passcode is required, enter ‘0000’.Remarks:• Make sure your mobile phone has the NFC feature and that the NFC function has been switched on and your phone is not in standby mode.• Pairing with NFC is suitable only for Android mobile operating system 4.2 or above.[ 2.0 Turning the headset on and o ][ 3.0 Pair the headset with your phone ]You can also use this headset with the audio cable provided when the battery is low. Make sure the headset is turned o before using the audio cable.Please refer to www.onkyo.com/welcome for the full user manualA white light flashes slowly.An alternating white and blue light flashes.A blue light flashes at every 8 seconds interval.A blue light flashes rapidly.The battery is low.The headset is in pairing mode.The headset is switched on but not connected. If no connection can be made, the headset will turn itself o after 5 minutes.The headset is both paired & connected.[ 5.0 LED Indicator light ][ 6.0 Corded audio connection ]MUSIC CONTROLS VOICE/CALL CONTROLS[ 4.0 Using music and call controls ]Play/Pause Tap onceVolume up Slide up or slide up and holdVolume down Slide down or slide down and holdSkip forward Slide forwardSkip backward Slide backwardSiri/Google Now* Press oncePick up call/Hang up Tap onceReject incoming call Tap and holdMute/unmute the micwhile in a callPress onceSwitch caller while in a call Slide forwardMicro USBcharging slotAudio jack(Left side)Pairing additional devicesA total of 4 bluetooth devices can be paired with your headphones. (See step 3 for pairing). Two devices can be connected simultaneously allowing you to switch between them both.Switching between devicesThe multipoint feature allows you to connect and switch between two devices simultaneously. Simply pause your music or video on one device and press play on your second device, the headphone will automatically connect to the playing device.When you receive a phone call the audio on the first device automatically pauses to receive the phone call on the second device, with the audio resuming when the call has finished. (See step 4 for call controls)[ 7.0 Multipoint ]NFC detection area2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Gibson Innovations Netherlands B.V. BuildingAABB‘0000’ not required forsome mobile phonesSettingsSelect BackConnectivity10:32Enter Password****0000SettingsDevices FoundSelect Back10:31Onkyo H500BTSettingsBluetoothSelect BackConnectivity10:30AddBluetoothdeviceAB* To use the voice control feature on your phone via Bluetooth please refer to the user manual for the correct settings for your device.LED indicator lightPower On/OMicrophoneTouch panel for:Music/Call/Volume/ Track controlsPairing/Mute (call)AA

Navigation menu