Gibson Innovations SHB4305 In-ear Bluetooth Headphones User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3502771
Application ID	sZOL4TI71tQUOSxnYS7L8A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	131.45kB (1643141 bits)
Date Submitted	2017-08-09 00:00:00
Date Available	2017-08-09 00:00:00
Creation Date	2017-08-04 16:29:38
Producing Software	Adobe Acrobat 11.0.0
Document Lastmod	2017-08-04 16:29:38
Document Title	Users Manual
Document Creator	Adobe Acrobat 11.0.0

BASS+
SHB4305
User manual
Register your product and get support at
www.philips.com/support
Contents
Important safety instructions    2
Hearing Safety   
General information   
2 Your Bluetooth in-ear
headphones   
What's in the box   
Other devices   
Overview of your Bluetooth inear headphones   
3 Get started   
Charge your headphones   
Pair the headphones with your
mobile phone   
4 Use your headphones   
Connect the headphones to a
Bluetooth device   
Manage your calls and music   
How to wear   
Choose your best fit for big,
bold bass   
5 Technical data   
6 Notice   
Declaration of conformity   
Disposal of your old product
and battery   
Compliance with EMF   
Trademarks   
10
7 Frequently asked questions    11
EN
1 Important
safety
instructions
Hearing Safety
General information
To avoid damage or malfunction:
Caution
•• Do not expose headphones to excessive heat.
•• Do not drop your headphones.
•• Headphones shall not be exposed to dripping
or splashing.
•• Do not allow your headphones to be
submerged in water.
•• Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives.
•• If cleaning is required use a soft cloth, if
Danger
••
•• To avoid hearing damage, limit the time you
use headphones at high volume and set the
volume to a safe level. The louder the volume,
the shorter the safe listening time is.
Be sure to observe the following
guidelines when using your headset.
•
Listen at reasonable volumes for
reasonable periods of time.
•
Be careful not to adjust the volume
continuously upwards as your
hearing adapts.
•
Do not turn up the volume so high
that you can’t hear what’s around
you.
•
You should use caution or
temporarily discontinue use in
potentially hazardous situations.
•
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
•
Using headphones with both
ears covered while driving is not
recommended and may be illegal in
some areas while driving.
•
For your safety, avoid distractions
from music or phone calls while in
traffic or other potentially dangerous
environments.
EN
••
necessary dampened with a minimum amount
of water or diluted mild soap, to clean the
product.
The integrated battery shall not be exposed
to excessive heat such as sunshine, fire or the
like.
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
About operating and storage
temperatures and humidity
•
Operate or store in a place where
temperature is between -15ºC (5ºF)
and 55ºC (131ºF) (up to 90% relative
humidity.
•
Battery life may be shorter in high or
low temperature conditions.
2 Your
Bluetooth
in-ear
headphones
Congratulations on your purchase, and
welcome to Philips! To fully benefit
from the support that Philips offers,
register your product at www.philips.
com/welcome.
With this Philips wireless in-ear
headphones, you can:
•
enjoy convenient wireless
handsfree calls;
•
enjoy and control wireless music;
•
switch between calls and music.
What's in the box
USB charging cable (for charging only)
Quick start guide
Other devices
A mobile phone or device (e.g.
notebook, PDA, Bluetooth adapters,
MP3 players etc) which supports
Bluetooth and is compatible to the
headphones (see ‘Technical data’ on
page 8).
Overview of your
Bluetooth in-ear
headphones
Philips Bluetooth in-ear headphones
SHB4305
Replaceable ear tips
EN
a Multi-function button
b Microphone (back side)
c Volume/Track control button
d LED indicator
e Micro USB charging slot
EN
3 Get started
Charge your headphones
Warning
•• Only charged with certified USB adapter DC
5V/0.5A.
Note
•• Before you use your headphones for the
••
••
first time, charge the battery for 3 hours for
optimum battery capacity and lifetime.
Use only the original USB charging cable to
avoid any damage.
Finish your call before charging the
headphones, as connecting the headphones
for charging will power the headphones off.
Connect the supplied USB charging
cable to:
• the micro USB charging slot on
the headphones and;
• the charger/USB port of a
computer.
»» LED turns white during
charging and turns off when the
headphones is fully charged.
link between the headphones and
mobile phone. The headphones store
the last 8 devices in the memory. If
you try to pair more than 8 devices, the
earliest paired device is replaced by the
new one.
Make sure that the headphones are
fully charged and turned off.
Press and hold the multi-function
button for 6 seconds until the blue
and white LED flashes alternately.
»» The headphones remain in
pairing mode for 5 minutes.
Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
Pair the headphones with the
mobile phone. For detailed
information, refer to the user
manual of your mobile phone.
The following example shows you
how to pair the headphones with your
mobile phone.
Activate the Bluetooth feature of
your mobile phone, select BASS+
In-Ear.
Enter the headset password "0000"
(4 zeros) if prompted. For those
mobile phones featuring Bluetooth
3.0 or higher, no need to enter a
password.
Tip
•• Normally, a full charge takes 2 hours.
BASS+ In-Ear
SHB4405
Pair the headphones with
your mobile phone
Before you use the headphones with
your mobile phone for the first time,
pair it with a mobile phone. A successful
pairing establishes a unique encrypted
EN
4 Use your
headphones
Manage your calls and
music
On/off
Connect the headphones
to a Bluetooth device
Turn on your mobile
phone/Bluetooth device.
Press and hold the multi-function
button for 2 seconds to turn the
headphones on.
»» The blue LED flashes.
»» The headphones are
reconnected to the
last connected mobile
phone/Bluetooth device
automatically. If the last one is
not available, the headphones
try to reconnect to the second
last connected device.
Tip
•• If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature
after turning on the headphones, you have
to reconnect the headphones and mobile
phone/Bluetooth device manually.
Task
Turn the
headphones
on.
Button
Multifunction
button
Turn the
headphones
off.
Multifunction
button
Music control
Task
Play or pause
music.
Adjust
volume.
Skip forward.
Button
Multifunction
button
+/-
Operation
Press once.
Press and
hold for 2
seconds.
Press and
hold for 2
seconds.
Note
•• If the headphones fail to connect to any
Bluetooth device within range in 5 minutes, it
will switch off automatically to save the battery
life.
EN
Operation
Press and
hold for 2
seconds.
»» The blue
LED
flashes.
Press and
hold for 6
seconds.
»» The
white
LED is
on and
fades
out.
Skip
backward.
Press once.
Call control
Task
Pick up/hang
up a call.
Switch caller
during a call.
Button
Multifunction
button
Multifunction
button
Operation
Press once.
»» 1 beep.
How to wear
Press twice.
Other headphones indicator status
Headphones
status
The headphones
are connected
to a Bluetooth
device, while the
headphones in
standby mode
or while you are
listening to music.
The headphones
are ready for
pairing.
The headphones
are on but not
connected to a
Bluetooth device.
Low battery level.
Battery is fully
charged.
Indicator
The blue LED
flashes for every 8
seconds.
The LED flashes
blue and white
alternately.
The blue LED
flashes quickly.
If no connection
can be made, the
headphones will
turn itself off within
5 minutes.
The white LED
flashes 2 times for
every 150 seconds
until it is out of
power.
The white LED is
off.
Choose your best fit for
big, bold bass
EN
5 Technical
data
•
•
•
•
Music time: 6 hours
Talk time: 5.5 hours
Standby time: 110 hours
Normal time for a full charge: 2
hours
Rechargeable lithium polymer
battery (110 mAh)
Bluetooth 4.1, Bluetooth mono
support (Headset Profile - HSP,
Hands-Free Profile - HFP),
Bluetooth stereo supported
(Advanced Audio Distribution
Profile - A2DP; Audio Video Remote
Control Profile - AVRCP)
Frequency range: 2.402-2.480GHz
Transmitter power: <20dBm
Operating range: Up to 10 meters
(33 feet)
Digital echo & noise reduction
Auto power off
•
•
•
•
•
•
•
Note
•• Specifications are subject to change without
notice.
EN
6 Notice
Declaration of conformity
Hereby, Gibson Innovations declares
that this product is in compliance
with the essential requirements
and other relevant provisions of
Directive 2014/53/EU. You can find the
Declaration of Conformity on
www.p4c.philips.com.
electronic products and rechargeable
batteries. Follow local rules and
never dispose of the product and
rechargeable batteries with normal
household waste. Correct disposal of
old products and rechargeable batteries
helps prevent negative consequences
for the environment and human health.
Remove the integrated battery
Note
•• Make sure the headphones are disconnected
Disposal of your old
product and battery
Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused.
from the USB charging cable before removing
the battery.
If there is no collection/recycling system
for electronic products in your country,
you can protect the environment by
removing and recycling the battery
before disposing the headphones.
This symbol on a product means that
the product is covered by European
Directive 2012/19/EU.
This symbol means that the product
contains a built-in rechargeable
battery covered by European Directive
2013/56/EU which cannot be disposed
of with normal household waste. We
strongly advise you to take your product
to an official collection point or a Philips
service centre to have a professional
remove the rechargeable battery.
Inform yourself about the local separate
collection system for electrical and
Compliance with EMF
This product complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fields.
Environmental information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
EN
materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags,
protective foam sheet.)
Your system consists of materials
which can be recycled and reused
if disassembled by a specialized
company. Please observe the local
regulations regarding the disposal
of packaging materials, exhausted
batteries and old equipment.
Trademarks
Bluetooth
The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Gibson Innovations Limited
is under license. Other trademarks
and trade names are those of their
respective owners.
10
EN
7 Frequently
asked
questions
My Bluetooth headphones are
connected to a Bluetooth stereo
enabled mobile phone, but music only
plays on the mobile phone speaker.
Refer to the user manual of your mobile
phone. Select to listen to music through
the headphones.
My Bluetooth headphones do not
switch on.
The battery level is low. Charge the
headphones.
The audio quality is poor and crackling
noise can be heard.
The Bluetooth device is out of range.
Reduce the distance between your
headphones and Bluetooth device, or
remove obstacles between them.
I cannot pair my Bluetooth headphones
with a mobile phone.
The Bluetooth is disabled. Enable
the Bluetooth feature on your mobile
phone and turn on the mobile phone
before you turn on the headphones.
Pairing does not work.
Make sure the headphones are in
pairing mode.
•
Follow the steps described in
this user manual (see ‘Pair the
headphones with your mobile
phone’ on page 5).
•
Make sure that the LED light flashes
blue and white alternately before
you release the multi-function
button. Do not stop holding the
button if you see the blue LED only.
The mobile phone cannot find the
headphones.
•• The headphones may be
connected to a previously paired
device. Turn off the connected
device or move it out of range.
•• Pairing may have been reset or the
headphones have been previously
paired with another device. Pair the
headphones with the mobile phone
again as described in the user
manual.
The audio quality is poor when
streaming from the mobile phone is very
slow, or audio streaming does not work
at all.
Make sure your mobile phone not only
supports (mono) HSP/HFP but also
supports A2DP (see ‘Technical data’ on
page 8).
I hear but cannot control music on my
Bluetooth device (e.g. play/pause/skip
forward/backward).
Make sure the Bluetooth audio source
supports AVRCP (see ‘Technical data’ on
page 8).
How do I get the best bass performance
from my earphones?
For optimum bass performance, a good
seal is required between the earphones
and your ear canals.
Human ears are all unique – size and
shape varies from person to person,
which is why the earphones come with
three pairs of differently designed ear
tips. Try each of them when playing
music, and choose the pair that offers
the best comfort and bass performance.
You should notice that the correctly
fitting ear tips also block out more of the
background noise.
For further support, visit www.philips.
com/support.
12
2017 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under the responsibility
of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in
relation to this product.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
UM_SHB4305_00_EN_V1.0
WK1723
正面
尺寸为：89*141.5mm
反面

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:08:04 16:29:38+08:00
Creator                         : Adobe Acrobat 11.0.0
Modify Date                     : 2017:08:04 16:29:38+08:00
Title                           : 
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:08:04 16:29:38+08:00
Creator Tool                    : Adobe Acrobat 11.0.0
Format                          : application/pdf
Document ID                     : uuid:d7352339-ecd7-48ac-9962-85e71d241d4d
Instance ID                     : uuid:37caf20a-51d6-45ac-b46a-5b6dcc271f09
Producer                        : Adobe Acrobat 11.0.0
Page Count                      : 16

EXIF Metadata provided by EXIF.tools