Gibson Innovations WSB5 Soundbar Speaker User Manual 13

Gibson Innovations Limited Soundbar Speaker 13

Users Manual

www.philips.com/supportUser manualAlways there to help youRegister your product and get support atQuestion?Contact Philips
1ENContents1 Important 2Important safety instructions 2Care for your product 3Care of the environment 3Help and support 42 Your SoundBar 5Main unit 5Remote control 5Wireless portable speakers 6Wireless subwoofer 7Connectors 73 Connect and set up 9Charge portable speakers 9Pair up with subwoofer/speakers 9Place speakers 10Connect audio from TV 10Connect audio from other devices 12Connect digital devices through HDMI 134 Spatial calibration 14Step 1: calibrate the listening zone 14Step 2: calibrate the surround speaker position 145 Use your SoundBar 16Adjust the volume 16Choose your sound 16MP3 player 17Play music via Bluetooth 17Connect Bluetooth via NFC 18Auto standby 19Set display brightness 19Apply factory settings 196 Update software 20Check software version 20Update software via USB 207 Wall mount your SoundBar 21Wall mount 21 3URGXFWVSHFLÀFDWLRQV 229 Troubleshooting 2310 Notice 25Notice of compliance 25Trademarks 25
2 3ENEN• If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.• If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. • Apparatus shall not be exposed to dripping or splashing. • Do not place any sources of danger on the apparatus IRUH[DPSOHOLTXLGÀOOHGobjects, lighted candles). •This apparatus may contain lead and mercury. Dispose according to local, State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips.com. •Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. •Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling apparatus can cause serious injury or even death.• This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.Class II equipment symbol This symbol indicates that the unit has a double insulation system. This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING:7RUHGXFHWKHULVNRIÀUHRUelectric shock, this apparatus should not be H[SRVHGWRUDLQRUPRLVWXUHDQGREMHFWVÀOOHGwith liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Care for your product8VHRQO\PLFURÀEHUFORWKWRFOHDQWKHSURGXFWCare of the environmentDisposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact 1 ImportantRead and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.Important safety instructions • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or RWKHUDSSDUDWXVLQFOXGLQJDPSOLÀHUVWKDWproduce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided SOXJGRHVQRWÀWLQWR\RXURXWOHWFRQVXOWan electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories VSHFLÀHGE\WKHPDQXIDFWXUHU • Use only with the cart, stand, tripod, EUDFNHWRUWDEOHVSHFLÀHGE\WKHmanufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storm or when unused for long periods of time. • Refer all servicing WRTXDOLÀHGVHUYLFHpersonnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:• Install all batteries correctly, + and - as marked on the unit.• Do not mix batteries (old and new or carbon and alkaline, etc.).• Remove batteries when the unit is not used for a long time.• The batteries shall not be exposed to H[FHVVLYHKHDWVXFKDVVXQVKLQHÀUHRUthe like.• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.• The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.
4 5ENEN2 Your SoundBarCongratulations on your purchase, and ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURPthe support that Philips offers, register your SoundBar at www.philips.com/welcome.Main unitThis section includes an overview of the main unit. a Display panelb (Standby-On/Standby indicator)When the SoundBar is in standby, the standby indicator turns red.c NFC tagTap the NFC-enabled device on the tag for Bluetooth connection.Remote controlThis section includes an overview of the remote control.ab c a Switch the SoundBar on or to standby.b Source buttons• HDMI ARC: Switch your source to HDMI ARC connection.• HDMI 1: Switch your source to the HDMI IN 1 connection.• HDMI 2: Switch your source to the HDMI IN 2 connection.• COAX: Switch your audio source to the coaxial connection. • OPTICAL: Switch your audio source to the optical connection. • AUDIO IN: Switch your audio source to the MP3 connection (3.5mm jack).• : For Bluetooth on the main unit only: Switch to Bluetooth mode.• AUX: Switch your audio source to the AUX connection.bacdfghijklepnomyour local authorities or visit www.recycle.philips.com.This product contains non-removable batteries:• Do not incinerate. Batteries may explode if overheated.• For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com.Help and supportFor extensive online support, visit www.philips.com/support to:• download the user manual and the quick start guide• watch video tutorials (available only for selected models)• ÀQGDQVZHUVWRIUHTXHQWO\DQVZHUHGquestions (FAQs)• email us a question• chat with our support representative.Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your SURGXFW<RXFDQÀQGWKLVLQIRUPDWLRQRQWKHback or bottom of your product.
6 7ENENportable speakers docked into the main unit). d SURROUND ON DEMAND button/LED• Press to switch the portable speaker to SURROUND ON DEMAND mode.• The LED lights up white when the portable speaker is switched to SURROUND ON DEMAND mode.e button/LED• Press to switch the portable speaker to Bluetooth mode.• The LED blinks when you switch the portable speaker to Bluetooth and no Bluetooth devices are connected.• The LED lights up when you switch the portable speaker to Bluetooth and Bluetooth devices are connected.Note • If you press the button on the portable speaker, the portable speaker disconnects the main unit (or SURROUND ON DEMAND mode switches off).Wireless subwooferThe SoundBar comes with a wireless subwoofer. a CONNECT (connect)Press to to enter the pairing mode for the subwoofer.b Subwoofer indicator• When the power is turned on, the indicator lights up.• During wireless pairing between the subwoofer and the main unit, the indicator blinks white quickly.• When the pairing succeeds, the indicator lights up white.• When the pairing fails, the indicator blinks white slowly.c AC MAINS~Connect to the power supply.ConnectorsThis section includes an overview of the connectors available on your SoundBar. a AUDIO-INAudio input from, for example, an MP3 player (3.5mm jack).b AUX-AUDIO IN L/RConnect to an analog audio output on the TV or an analog device. c DIGITAL IN-COAXIALConnect to a coaxial audio output on the TV or a digital device. d (SERVICE)&RQQHFWD86%ÁDVKGULYHWRXSJUDGHsoftware of this product (not for media play).e DIGITAL IN-OPTICALa c d e g hb fc / For Bluetooth on the main unit only: skip to the previous or next track.d For Bluetooth on the main unit only: play, pause or resume.e BASS +/-Increase or decrease bass on the main unit.f Volume control• +/-: Increase or decrease volume.• : Mute or restore volume.g VOICE• Press to select voice clarity sound mode.• Press and hold to toggle on or off CLOSE TO ME (close to me) sound mode.h MUSICSelect stereo sound mode.i REAR VOL.+/-Press to increase or decrease volume of the portable left and right speakers (only applicable when the portable left and right speakers are wirelessly connected to the main unit (or SURROUND ON DEMAND mode switches on)).j AUDIO SYNC +/-Increase or decrease audio delay.k NIGHTTurn night mode on or off.l AUTO VOL.Turn auto volume on or off.m CALIBRATION• Press and hold to trigger calibration for listening zone.• Press three times to trigger calibration for the portable left and right speakers position.n DIMSet the brightness of SoundBar display panel.o MOVIESelect surround sound mode.p TREBLE +/-Increase or decrease treble on the main unit.Wireless portable speakersThe SoundBar comes with two wireless portable speakers (left and right). * The illustration above is for overview of the portable left speaker.a Reset keyPress with a pin to reset the portable speaker to the default settings.b ON• Press to turn on the portable speaker if it automatically goes to standby.• Press and hold to switch the portable speaker to standby.c Speaker LED• Blinks in red and orange alternatively if the portable speaker is not wirelessly connected to the main unit.• Lights up white when the portable speaker is wirelessly connected to the main unit, or when the battery capacity is full or more than 30% remaining.• Lights up red when the battery capacity is less than 30% remaining .• Blinks red when the battery capacity is less than 10% remaining.• Lights up orange when the portable speaker is being charged (only for the b ea dc
8 9ENEN3 Connect and set upThis section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note • )RULGHQWLÀFDWLRQDQGVXSSO\UDWLQJVVHHWKHW\SHSODWHat the back or bottom of the product. • Before you make or change any connections, make sure that all devices are disconnected from the power outlet.Charge portable speakersIf the portable left/right speaker is undocked from the main unit, its battery level is indicated by the LED on the speaker.• Light up white: full battery or more than 30% capacity remaining• Light up red: low battery level, less than 30% remaining• Flash red: near empty, less than 10% remaining 1 Dock your portable speakers into the main unit to charge.2 Turn on the main unit. » During charging, the LED on the portable speaker lights up orange. » When fully charged, the LED on the portable speaker lights up white for 10 seconds.Note • It may take around two hours to fully charge the portable speakers. • Battery performance varies due to many factors including volume, sound setting and media played.Pair up with subwoofer/speakersThe wireless speakers and subwoofer automatically pair up with the SoundBar for wireless connection when you turn on the SoundBar, the portable speakers and the subwoofer. If no audio from the wireless speakers and subwoofer can be heard, manually pair up the portable speakers and the subwoofer.Pair up with the subwoofer1 Turn on the SoundBar and the subwoofer. » If the connection to the SoundBar is lost, the indicator on the subwoofer blinks white slowly.2 Press the CONNECT (connect) button on the subwoofer to enter the pairing mode. » The indicator on the subwoofer blinks white quickly.3 In OPTICAL mode (press OPTICAL) , within six seconds, on the remote control, press twice then Volume + once, and then hold down BASS +. » If the pairing succeeds, the indicator on the subwoofer lights up white. » If the pairing fails, the indicator on the subwoofer blinks white slowly.Connect to an optical audio output on the TV or a digital device. f HDMI IN1 / HDMI IN2Connect to the HDMI output on a digital device. g TO TV-HDMI OUT (ARC)Connect to the HDMI (ARC) input on the TV.h AC MAINS~Connect to the power supply.
10 11ENENWhat you need• A High Speed HDMI Cable.• Your TV supports both HDMI ARC and HDMI-CEC (see the TV user manual for details).• For some TV models, enable the external speaker output from the TV setting menu (see the TV user manual for details). 1 Using a High Speed HDMI cable, connect the HDMI OUT (ARC) connector on this product to the HDMI ARC connector on the TV. • The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.2 On your TV, turn on HDMI-CEC operations. • For HDMI-CEC issues on your TV, see the TV user manual to make sure that the HDMI-CEC setup is correct, or contact the TV manufacturer if needed.3 Press HDMI ARC on the remote control of this product to enable the HDMI ARC connection.Note • 100% interoperability with all HDMI-CEC devices is not guaranteed. • If your TV is not HDMI ARC compliant, connect an audio cable to hear the TV audio through this product.Option 2: Connect to TV through optical cableBest quality audio TV 1 Using an optical cable, connect the OPTICAL connector on this product to the optical output on the TV. • The digital optical output on the TV might be labeled OPTICAL OUT, SPDIF or SPDIF OUT. 2 Press OPTICAL on the remote control of this product to enable the optical connection.Option 3: Connect to TV through coaxial cableBest quality audio 1 Using a coaxial cable, connect the COAXIAL connector on this product to the coaxial output on the TV. • The digital coaxial output on the TV might be labeled COAXIAL/DIGITAL OUT or DIGITAL AUDIO OUT. 2 Press COAX on the remote control of this product to enable the coaxial connection.Option 4: Connect to TV through analog audio cablesBasic quality audio TV4 If the pairing fails, repeat the steps above.Pair up with the speakers1 Turn on the SoundBar and the portable speakers. » If the connection to the SoundBar is lost, the LED on the portable blinks in red and orange alternatively.2 Dock the portable left and right speakers into the main unit to pair up automatically.3 If the pairing fails, re-dock the portable speakers into the main unit.Place speakersFor best sound effect, position all the speakers towards the seating position and place them close to your ear level (seated). Note • Surround sound depends on factors such as room shape and size, type of wall and ceiling, windows nd UHÁHFWLYHVXUIDFHVDQGVSHDNHUDFRXVWLFV([SHULPHQWZLWKWKHVSHDNHUSRVLWLRQVWRÀQGWKHRSWLPXPVHWWLQJfor you.SUBWOOFERREAR RREAR LFollow these general guidelines for speakers placement.1 Seating position:This is the center of your listening area.2 Place the SoundBar in front of the seating position.3 REAR L (rear left) and REAR R (rear right): Place the portable speakers (surround) to the left and right side of your seating position, either in line with it or slightly behind it. 4 SUBWOOFER (subwoofer):Place the subwoofer at least one meter to the left or right of the TV. Leave about 10-centimeter clearance from the wall.Dock the portable speakersYou can also dock the portable left and right speakers into the main unit to listen to audio, for example, watching TV shows and news. Connect audio from TVConnect this product to a TV. You can listen to audio from TV programs through the speakers of this product. Option 1: Connect to TV through HDMI (ARC)Best quality audioThis product supports HDMI with Audio Return Channel (ARC). With the ARC feature, you can hear the TV audio through this product by using a single HDMI cable.
12 13ENEN• The analog audio output on the external device might be labeled AUDIO OUT. 2 Press AUX on the remote control of this product to enable the analog audio connection.Connect digital devices through HDMIConnect a digital device such as a set-top box, DVD/Blu-ray player, or games console to this product through a single HDMI connection. When you connect the devices in this way and SOD\DÀOHRUJDPHWKH• video is automatically displayed on your TV, and • audio is automatically played on this product. 1 Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital device to the HDMI IN on this product.2 Connect this product to TV through HDMI OUT (ARC). • If the TV is not HDMI CEC compliant, select the correct video input on your TV.3 On the connected device, turn on HDMI-CEC operations.• For HDMI-CEC issues on your TV, see the TV user manual and ensure the HDMI-CEC setup is correct, or contact the TV manufacturer if needed.4 Press HDMI IN on the remote control of this product to enable the HDMI IN connection. 1 Using an analog audio cable, connect the AUX connectors on this product to the analog audio output on the TV.• The analog audio output on the TV might be labeled AUDIO OUT.2 Press AUX on the remote control of this product to enable the analog audio connection.Connect audio from other devicesYou may also play audio from other devices through the speakers of this product.Option 1: Connect to other device through optical cableBest quality audio 1 Using an optical cable, connect the OPTICAL connector on this product to the optical output on the external device. • The digital optical output on the external device might be labeled OPTICAL OUT, SPDIF or SPDIF OUT. DVD2 Press OPTICAL on the remote control of this product to enable the optical connection.Option 2: Connect to other device through coaxial cableBest quality audio 1 Using a coaxial cable, connect the COAXIAL connector on this product to the coaxial output on the external device. • The digital coaxial output on the external device might be labeled COAXIAL/DIGITAL OUT or DIGITAL AUDIO OUT. 2 Press COAX on the remote control of this product to enable the coaxial connection.Option 3: Connect to other device through analog audio cablesBasic quality audio 1 Using an analog audio cable, connect the AUX connector on this product to the analog audio output on the external device.
14 15ENEN• Make sure that the portable left and right speakers are wirelessly connected to the main unit (press SURROUND ON DEMAND on the speaker). 2 Press CALIBRATION once to trigger calibration.• Press CALIBRATIONthree times to trigger calibration if you re-locate the portable left and right speakers and skip Step 1 (calibrate the listening zone) after you completed a round of spatial calibration previously. » You can hear the calibration tones from the portable speakers. 3 Wait until the calibration tones end. » If the calibration succeeds, DONE (done) is displayed on the display panel. And the new settings are stored.Note • Spatial calibration takes around three minutes. • Surround sound improvement is only noticeable if the portable left and right speakers (surround) were improperly placed, or if there is strong surround effect in the music you play. • If the portable left and right speakers are swapped in placement, during calibration L<->R is displayed for few seconds, then the calibration completes. • During calibration, you may press CALIBRATION to cancel calibration, and the settings returns to the default. • If the spatial calibration fails, an error message is displayed on the display panel, such as FAIL (fail), and the settings returns to the default. • If the spatial calibration fails, try the spatial calibration again, and make sure that the calibration points described at the beginning of this chapter are fully met.4 Spatial calibrationSpatial calibration is used to achieve the following convenience, and simultaneously optimizes surround sound experience for it.• Have freedom to place the portable left and right speakers (surround) according to your need.• Automatically balance the portable speakers (surround) with respect to your seating position.The spatial calibration involves two steps.• Step 1: calibrate the listening zone• Step 2: calibrate the surround speaker positionWhen to calibrate• If you perform spatial calibration for the ÀUVWWLPHSHUIRUPStep 1 and Step 2 in sequence.• If you re-design your seating layout, perform Step 1 and Step 2 in sequence.• If you re-locate the portable left and right speakers (surround), perform Step 2 independently (Step 1 can be skipped).Before you start• Make sure that the room is fairly quiet.• Place the portable left and right speakers angled towards the main unit.• Make sure that the main unit, the portable left and right speakers can fully "see" each other, no obstacle between them blocking such view. Stand the portable speakers upright if needed.• The minimum distance between the portable speakers and the main unit is 0.8m (2.6'), the maximum distance 6m (20').Step 1: calibrate the listening zone1 Place the portable left and right speakers on two seating positions you prefer most (such as on a sofa).• Make sure that the portable left and right speakers are wirelessly connected to the main unit (press SURROUND ON DEMAND on the speaker). 2 Press and hold CALIBRATION on the remote control for three seconds to trigger calibration. » ZONE (zone) is displayed on the display panel. » You can hear the calibration tones from the portable speakers.3 Wait until the calibration tones end. » ->SPKR (speaker) is displayed on the display panel. 4 Then perform the following Step 2 (calibrate the surround speaker position) to complete and store the new settings.Step 2: calibrate the surround speaker position1 Place the portable left and right speakers (surround) on the position you prefer.
16 17ENENIt also compresses the sound dynamics, increasing the volume for quiet scenes and decreasing the volume for loud scenes. 1 Press AUTO VOL. to turn auto volume on or off. » When auto volume is turned on, ON AUTO scrolls once on the display panel. » When auto volume is turned off, OFF AUTO scrolls once on the display panel.Synchronize video and soundIf the audio and video are not synchronized, delay the audio to match the video.1 Press AUDIO SYNC +/- to synchronize the audio with the video.• AUDIO SYNC + increases the sound delay, and AUDIO SYNC - decreases the sound delay.Night modeFor quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press NIGHT to turn night mode on or off. » When night mode is turned on, ON NIGHT scrolls once on the display panel. » When night mode is turned off, OFF NIGHT scrolls once on the display panel.Note • If auto volume is set to turned on, you cannot enable the night mode.MP3 playerConnect your MP3 player to play your audio ÀOHVRUPXVLFWhat you need• An MP3 player.• A 3.5mm stereo audio cable.1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on your SoundBar.2 Press AUDIO IN.3 Press the buttons on the MP3 player to VHOHFWDQGSOD\DXGLRÀOHVRUPXVLF• On the MP3 player, it is recommended to set the volume in the range of 80% maximum volume.Play music via BluetoothThrough Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then \RXFDQOLVWHQWRWKHDXGLRÀOHVVWRUHGRQWKHdevice through your SoundBar speakers.What you need• A Bluetooth device which supports %OXHWRRWKSURÀOH$'3DQGZLWK%OXHWRRWKversion as 2.1 + EDR.• The maximum operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).Note • The music streaming may be interrupted by obstacles between the device and this product, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. • If you want to connect this product with another Bluetooth device, break the current Bluetooth connection.5 Use your SoundBarThis section helps you use the SoundBar to play audio from connected devices.Before you start• Make the necessary connections described in the quick start guide and the user manual.• Switch the SoundBar to the correct source for other devices.Adjust the volume1 Press +/- (Volume) to increase or decrease a volume level.• To mute sound, press .• To restore the sound, press again or press +/- (Volume).For the portable left and right speakers only1 When the portable left and right speakers are wirelessly connected to the main unit (in SURROUND ON DEMAND mode), press REAR VOL.+/- to increase or decrease a volume level. Choose your soundThis section helps you choose the ideal sound for your video or music.Surround sound modeExperience an immersive audio experience with surround sound modes.• Press MOVIE to create a surround listening experience. Ideal for watching movie.• Press MUSIC to create stereo sound. Ideal for listening to music. Voice clarityIt makes human voice more clear and outstanding for listening.1 Press VOICE to switch to voice clarity. » When voice clarity is turned on, VOICE is displayed.2 To exit this sound mode, press MOVIE or MUSIC to select other sound mode.CLOSE TO ME (close to me)For ultimate clear sound without disturbing your neighbors, place both the portable left and right speakers close to you, and activate this feature (to mute the main unit).Note • It is applicable only when the portable left and right speakers are wirelessly connected to the main unit (or SURROUND ON DEMAND mode switches on). • If CLOSE TO ME (close to me) is turned on, the functions for MOVIE and MUSIC buttons are disabled.1 Press and hold VOICE for three seconds to activate the feature. » CLOSE TO ME (close to me) scrolls once on the display panel. » The main unit is muted.2 To exit this sound mode, press and hold VOICE again for three seconds. » The previous sound mode switches in.EqualizerChange the high frequency (treble) and low frequency (bass) settings of the SoundBar.1 Press TREBLE +/- or BASS +/- to change the frequency.Auto volumeTurn the auto volume on to keep the volume constant when you switch to a different source.
18 19ENEN• For pairing, tap the NFC device on the NFC tag of the main unit.Note • NFC feature is only available to the main unit, not available to the portable left and right speakers.1 Enable NFC on the Bluetooth device (see the device' s user manual for details).2 Tap the NFC device onto the NFC tag of the main unit until the SoundBar beeps.• )RUÀUVWWLPHFRQQHFWLRQRQVRPHmobile devices prompt for pair-up appears, select "YES" for connection. » When the Bluetooth connection succeeds, BT is displayed on the display panel. » If the connection fails, BT on the display panel blinks continuously.3 6HOHFWDQGSOD\DXGLRÀOHVRUPXVLFRQyour NFC device.• To break the connection, tap again the NFC device onto the NFC tag on the main unit.Auto standbyWhen playing media from a connected device, the SoundBar automatically switches to standby if:• no source button is pressed for 15 minutes, and• no audio/video playback is detected from a connected device.Set display brightnessYou can press DIM repeatedly to select a different brightness level of the display panel on this product.• If you select DIM O (dim) on the display, the display turns off after 10 seconds each time you press a button on the remote control.Apply factory settingsYou can reset this product to the default settings programmed at the factory.1 In AUX mode, on the remote control press Volume -, BASS -, and TREBLE - in sequence within three seconds. » When the factory settings restore is complete, the product automatically switches off and restarts.Bluetooth on the main unit1 Press on the remote control to switch the main unit to Bluetooth mode. » BT on the display blinks.2 On the Bluetooth device, switch on Bluetooth, search for and select Fidelio B5 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). » During connection, BT on the display blinks.3 Wait until BT on the display lights up. » If the connection succeeds, BT on the display lights up. » If the connection fails, BT on the display blinks.4 6HOHFWDQGSOD\DXGLRÀOHVRUPXVLFRQyour Bluetooth device.• During play, if a call is coming, music play is paused. • If music streaming is interrupted, place the Bluetooth device closer to the main unit.5 To exit Bluetooth, select other source. » When you switch back to Bluetooth mode, Bluetooth connection resumes.• To break the current Bluetooth connection, press and hold on the remote control.Bluetooth on a single speakerYou can use the portable left or the portable right speaker as a standalone Bluetooth speaker, independently from the main unit.1 Press the button on the left or right speaker to switch to Bluetooth mode. » The LED on the left or right speaker blinks.2 On the Bluetooth device, switch on Bluetooth, search for and select the name of the left or right speaker to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).• B5 -L portable stands for the portable left speaker, B5 -R portable for the portable right speaker. » During connection, the LED on the left or right speaker blinks.3 Wait until the LED on the portable speaker lights up. » If the connection succeeds, connection tone is heard, and the LED on the portable speaker lights up. » If the connection fails, the LED on the portable speaker blinks.4 6HOHFWDQGSOD\DXGLRÀOHVRUPXVLFRQyour Bluetooth device.• During play, if a call is coming, music play is paused. • If music streaming is interrupted, place the Bluetooth device closer to the main unit.5 To exit Bluetooth, press the SURROUND ON DEMAND button on the speaker. » When you switch back to Bluetooth mode, Bluetooth connection resumes.• To break the current Bluetooth connection, press and hold the button on the speaker.Note • The function of the remote control is not available to a standalone Bluetooth speaker (the portable left or right speaker).Connect Bluetooth via NFCNFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones.What you need• A Bluetooth device with NFC function.
20 21ENEN7 Wall mount your SoundBarBefore you mount your SoundBar on the wall, read all safety precautions.Wall mountNote • You must detach the portable speakers from the main unit before wall mounting or un-mounting. • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. • Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. • Before wall mount, you need not remove the four rubber feet at the bottom of the soundbar, otherwise WKHUXEEHUIHHWFDQQRWEHÀ[HGEDFNScrew length/diameterDepend on the type of wall mounting this wall mount bracket, make sure that you use screws of a suitable length and diameter. See the illustration on the separate wall mount sheet on how to wall mount the SoundBar.1) Drill holes on the wall.2) Secure the wall bracket on the wall with the dowels and screws.3) Hang the SoundBar on the wall bracket.> 25mm3 - 3.5mm6 Update softwareTo get the best features and support, update your product with the latest software. What you need• $86%ÁDVKGULYHWKDWLV)$7IRUPDWWHGDo not use a USB hard drive.• A computer with Internet access.• $QDUFKLYHXWLOLW\WKDWVXSSRUWVWKH=,3ÀOHformat.Check software versionIn HDMI ARC source, on the remote control press TREBLE -, BASS -, and Volume - in sequence within three seconds. » The software version number is displayed on the display panel.Update software via USB1 Check the latest software version on www.philips.com/support.• Search for your model and click on "Software and drivers".2 'RZQORDGWKHVRIWZDUHLQWRD86%ÁDVKdrive.a Unzip the download if zipped, and make sure that the unzipped folder is named "UPG".b Put the "UPG" folder in the root directory.3 &RQQHFWWKH86%ÁDVKGULYHWRWKH (SERVICE) connector on this product.4 Switch this product to HDMI ARC source (press HDMI ARC).5 On the remote control, within 6 seconds press twice then Volume + once, and then hold down MOVIE. » Then "UPG" (upgrade) is displayed on the display panel.6 Wait until the upgrade is completed. » If the upgrade is complete, this product automatically turns off and on again.Caution • 'RQRWWXUQRIIWKHSRZHURUUHPRYHWKH86%ÁDVKdrive when the software update is in progress because you might damage this product. • The upgrade time may take around eight minutes.
22 23ENEN9 TroubleshootingWarning • Risk of electric shock. Never remove the casing of the product.To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. SoundNo sound from the speakers of this product.• Connect the audio cable from this product to your TV or other devices. However, you do not need a separate audio connection when:• This product and TV are connected through HDMI ARC connection, or• a device is connected to the HDMI IN connector on this product.• Make sure that you connect the audio input on this product to the audio output on your TV or other devices.• On the remote control, select the correct audio input.• Reset this product to its factory settings.• Make sure that this product is not muted. No sound from the wireless portable speakers.• Make sure that the wireless portable speaker is turned on. Press ON on the bottom of the wireless portable speaker.• Dock the wireless portable speakers into the main unit to charge the battery.• If you intend the wireless portable speaker to wirelessly connect to the main unit, make sure that you press the SURROUND ON DEMAND button on the wireless portable speaker.• If you intend the wireless portable speaker to be a standalone Bluetooth speaker, make sure that you connect the portable left or right speaker to a Bluetooth device (see 'Bluetooth on a single speaker' on page 18).No sound from the wireless subwoofer.• Wirelessly connect the subwoofer to the main unit.Distorted sound or echo.• If you play audio from the TV through the SoundBar, make sure that the TV is muted.Audio and video are not synchronized.• Press AUDIO SYNC +/- to synchronize the audio with the video.BluetoothA device cannot connect with the SoundBar.• The device does not support the FRPSDWLEOHSURÀOHVUHTXLUHGIRUWKHSoundBar.• You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.• The device is not correctly connected. Connect the device correctly.• The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again.Quality of audio play from a connected Bluetooth device is poor.• The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar.The connected Bluetooth device connects and disconnects constantly.• The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle between the device and the SoundBar.• Turn off Wi-Fi function on the Bluetooth device to avoid interference.• For some Bluetooth, the Bluetooth connection can be deactivated 8 Product specificationsNote • 6SHFLÀFDWLRQVDQGGHVLJQDUHVXEMHFWWRFKDQJHZLWKRXWnotice.$PSOLÀHU• FTC total output power: 66W• Front Left + Right: 16W (1%THD, 8ohm, 150Hz-20kHz)• Surround Left + Right: 20W (1%THD, 8ohm, 150Hz-20kHz)• Subwoofer: 30W (1%THD, 4ohm, 30Hz-140Hz)• Total output power: 210W RMS (+/- 0.5 dB, 30% THD) / 168W RMS (+/- 0.5 dB, 10% THD)• Frequency response: 20 Hz-20 kHz / ±3 dB• Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)• Input sensitivity:• AUX: 750 mV• AUDIO IN: 400 mVAudio• S/PDIF Digital audio input:• Coaxial: IEC 60958-3• Optical: TOSLINKBluetooth •%OXHWRRWKSURÀOHV$'3 •Bluetooth version: 2.1 + EDRMain unit •Power supply: 110-240 V~, 50-60 Hz •Power consumption: 50 W •6WDQGE\SRZHUFRQVXPSWLRQ: •Dimensions (WxHxD): 1035 x 73 x 156 mm (with portable left and right speakers attached) •Weight: 4.4 kg • Built-in speakers• 2 x woofer (76 mm/3", 8 ohm)• 2 x tweeter (25.4 mm/1", 8 ohm)Portable speakers• Speaker impedance: 8 ohm• Speaker drivers: 2 x 76 mm (3") full range• Dimensions (WxHxD): 191 x 73 x 156 mm• Weight: 0.86 kg/eachSubwoofer• Power supply: 110-240 V~, 50-60 Hz• Power consumption: 30 W• 6WDQGE\SRZHUFRQVXPSWLRQ:• Impedance: 4 ohm• Speaker drivers: 1 x 165 mm (6.5") woofer• Dimensions (WxHxD): 200 x 510 x 201 mm• Weight: 4.9 kgWall mount •Dimensions (WxHxD): 40 x 100 x 26.5 mm •Weight: 0.1 kg/eachRemote control batteries• 2 x AAA-R03-1.5 V
24 25ENEN10 NoticeThis section contains the legal and trademark notices.Notice of complianceThe device complies with the FCC rules, Part 15. Operation is subject to the following twoconditions:a This device may not cause harmful interference, andb This device must accept any interference received, including interference that may cause undesired operation.FCC rulesThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Relocate the receiving antenna.• Increase the separation betweenequipment and receiver.• Connect the equipment into an outlet ona circuit different from that to which thereceiver is connected.• Consult the dealer or an experiencedradio/TV technician for help.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.Warning:$Q\FKDQJHVRUPRGLÀFDWLRQVPDGHto this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment.Model number: B5/37Trade Name: PhilipsResponsible Party:P&F USA, Inc. PO Box 2248 Alpharetta, GA 30023-2248; 1-866-226-6074Canada: CAN ICES-3(B)/NMB-3(B)This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following Two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.TrademarksFor DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.automatically to save power. This does not indicate any malfunction of the SoundBar.Spatial calibrationWhy spatial calibration is needed?•Spatial calibration optimizes surroundsound experience if your portable left andright speakers (surround) are not properlyplaced.Improvement in surround sound is not noticeable after successful spatial calibration.• Surround sound improvement is onlynoticeable if the portable left and rightspeakers (surround) were improperlyplaced, or if there is strong surround effectin the music you play.Error message is displayed on the display panel.• If spatial calibration fails, one of thefollowing error message is displayed. Referto the fourth chapter (Spatial calibration)for details to re-calibrate.•FAIL (fail): indicates that theportable left/right speaker is not inSURROUND ON DEMAND modeor out of calibration range, or there issome obstacle by which the main unit, the portable left and right speakerscannot completely "see" each other.•BATT LOW (battery low): indicatesthat the portable left/right speaker haslow battery.•ERR1 (error): indicates that theportable left and right speakers are notdetached from the main unit.Wireless Speaker Model number: WSB5
26 EN7KHWHUPV+'0,DQG+'0,+LJK'HÀQLWLRQMultimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.© 2013 CSR plc and its group companies.The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
2015 © WOOX Innovations Limited. All rights reserved.Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.000000000000
English ImportantRead and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.Help and supportFor extensive online support, visit www.philips.com/support to:• download the user manual and the quick start guide• watch video tutorials (available only for selected models)• Ànd answers to frequently answered questions (F$4s)• email us a question• chat with our support representative.Follow the instructions on the website to select your language, and then enter your product model number. $lternatively, you can contact &onsumer &are in your country. %efore you contact, note down the model number and serial number of your product. <ou can Ànd this information on the back or bottom of your product.Important safety instructions • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliÀers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. $ polarized plug has two blades with one wider than the other. $grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not Àt into your outlet, consult an electrician for replacement of the obsolete outlet.• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.• Only use attachments/accessories speciÀed by the manufacturer. •Use only with the cart, stand, tripod, bracket or table speciÀed by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storm or when unused for long periods of time. • Refer all servicing to qualiÀed service personnel. 6ervicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • Battery usage CAUTION - To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit:• Install all batteries correctly, + and - as marked on the unit.• Do not mix batteries (old and new or carbon and alkaline, etc.).• Remove batteries when the unit is not used for a long time.• The batteries shall not be exposed to excessive heat such as sunshine, Àre or the like.• 3erchlorate 0aterial - special handling may apply. 6ee www.dtsc.ca.gov/hazardouswaste/perchlorate.• The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. 6evere internal burns can occur within two hours of ingestion.• If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention.• When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.• If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. • Apparatus shall not be exposed to dripping or splashing. • Do not place any sources of danger on the apparatus (for example. liquid Àlled objects, lighted candles). •This apparatus may contain lead and mercury. Dispose according to local, 6tate or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www.mygreenelectronics.com or www.eiae.org or www.recycle.philips.com. •Where the 0$I16 plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. •Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. $ falling apparatus can cause serious injury or even death.• This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus.Class II equipment symbolThis symbol indicates that the unit has a double insulation system. This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of Àre or electric shock, this apparatus should not be exposed to rain or moisture and objects Àlled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Care for your product8se only microÀber cloth to clean the product.Care of the environment Disposal of your old product and batteryYour product is designed and manufactured with high quality materials and components, which can be recycled and reused.This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities.This product contains batteries:• Dispose of batteries properly. Do not incinerate. %atteries may explode if overheated.• Do not wrap in metal or aluminum foil. Wrap in newspaper before discarding.• It is suggested that you contact your local town or city to determine proper battery redemption site(s) in your area. • Please visit www.call2recycle.org for additional information on a recycling center in your area for rechargeable batteries.Notice of complianceThe device complies with the F&& rules, Part . 2peration is subject to the following two conditions:a This device may not cause harmful interference, andb This device must accept any interference received, including interference that may cause undesired operation.FCC rulesThis equipment has been tested and found to comply with the limits for a &lass % digital device, pursuant to part  of the F&& Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Relocate the receiving antenna.• Increase the separation between equipment and receiver.• &onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.• &onsult the dealer or an experienced radio/T9 technician for help.FCC Radiation Exposure Statement:This equipment complies with F&& radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.Warning: $ny changes or modiÀcations made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment.Model 1umber : #Trade 1ame: PhilipsResponsible Party:PF 86$, Inc. P2 %ox 228 $lpharetta, G$ 002-228  (8) 22-07Canada: &$1 I&E6-(%)/1M%-(%)This device complies with Industry &anada licence-exempt R66s. 2peration is subject to the following Two conditions: () this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.EspañolImportanteLea y asegúrese de comprender todas las instrucciones antes de usar el producto. La garantía no cubre los daños producidos por no haber seguido las instrucciones.Ayuda y asistencia técnicaPara obtener una amplia asistencia en línea, visite www.philips.com/support para:• descargar el manual de usuario y la guía de inicio rápido• ver tutoriales de video (solo disponible para modelos seleccionados)• buscar respuestas a preguntas frecuentes (F$4)• enviarnos un correo electrónico con una pregunta• chatear con nuestro representante de soporte.6iga las instrucciones del sitio web para seleccionar su idioma e ingrese el número de modelo de su producto. Ta m b i pn puede ponerse en contacto con el servicio de atención al cliente de su país. $ntes de ponerse en contacto, anote el modelo y número de serie del producto. Puede buscar esta información en la parte posterior o inferior del producto.Instrucciones de seguridad importantes • Lea estas instrucciones. • Conserve estas instrucciones. • Preste atención a todas las advertencias. • Siga todas las instrucciones. • No utilice este aparato cerca del agua. • Utilice únicamente un paño seco para la limpieza. • No bloquee las aperturas de ventilación. Realice la instalación de acuerdo con las indicaciones del fabricante. • No realice la instalación cerca de fuentes de calor como radiadores, rejillas de calefacción, estufas u otros equipos que produzcan calor (incluso ampliÀcadores). •Utilice el conector polarizado o con conexión a tierra de conformidad con las normas de seguridad. Un enchufe polarizado cuenta con dos álabes, uno más ancho que el otro. Los conectores a tierra tienen dos conductores y una tercera terminal de contacto para la conexión a tierra. El conductor ancho o la tercera terminal de contacto con conexión a tierra se proveen para mayor seguridad. 6i el enchufe suministrado no encaja correctamente en el tomacorriente, consulte a un electricista para reemplazar la toma. • Proteja el cable de alimentación. Evite pisar o doblar el cable, en particular a la altura del conector y las terminales de contacto del aparato. • Utilice sólo los accesorios que especiÀca el fabricante. • Utilice sólo el carrito, el soporte, el trípode y la mesa que indica el fabricante y los que incluye el equipo. Tenga cuidado cuando transpor te el equipo en el carrito para evitar caídas y posibles lesiones.• Desenchufe el equipo durante tormentas eléctricas o cuando no se utilice por un período prolongado.• Todos los trabajos de servicio técnico deben ser realizados por personal de servicio caliÀcado. 6olicite el servicio de asistencia técnica cuando, por ejemplo, el cable de alimentación o el conector están dañados, si se derramó líquido o cayeron objetos dentro del aparato, si el equipo estuvo expuesto a la lluvia o humedad, si no funciona normalmente o si se cayó.• PRECAUCIÓN: para evitar que las baterías se sulfaten y puedan ocasionar lesiones, daños materiales o en la unidad:• Instale todas las baterías de forma correcta, de acuerdo con los signos + y - marcados en la unidad.• 1o utilice baterías de distintas clases (nuevas y usadas o de carbono y alcalinas, etc.).• Extraiga las pilas cuando no utilice la unidad durante un período prolongado.• 1o exponga las baterías a temperaturas altas como las que emiten la luz solar, el fuego u otros elementos similares.• Este producto contiene perclorato y puede requerir un método de manipulación especial. 9isite www.dtsc.ca.gov/hazardouswaste/perchlorate.• El producto/control remoto puede contener una batería tipo botón o moneda fácil de tragar. 6iempre mantenga las baterías lejos del alcance de los niños. En caso de ingestión la batería podría causar lesiones graves o la muerte. Puede haber quemaduras internas graves en un plazo de dos horas tras la ingestión.• 6i sospecha que una batería se ha ingerido o introducido en cualquier parte del cuerpo, consulte inmediatamente a un médico.• $l cambiar las baterías, mantenga siempre las baterías nuevas y usadas lejos del alcance de los niños. 9eriÀque que el compartimiento de la batería esté bien cerrado luego de reemplazar la batería.• 6i el compartimiento de la batería no puede cerrarse, discontinúe el uso del producto. Manténgalo lejos del alcance de los niños y comuníquese con el fabricante. • No exponga el equipo a goteos ni salpicaduras. • No coloque el aparato cerca de fuentes de peligro (por ejemplo, objetos que contengan líquidos o velas encendidas). •Este aparato puede contener plomo y mercurio. &umpla con la normativa local, estatal o nacional sobre eliminación de productos. &omuníquese con las autoridades locales para solicitar información sobre la eliminación o el reciclaje de productos. Para obtener más información sobre las opciones de reciclaje disponibles, ingrese en cualquiera de los siguientes sitios web: www.mygreenelectronics.com, www.eiae.org, www.recycle.philips.com. •6i el conector de alimentación u otro conector se utilizan como dispositivos de desconexión, deben estar accesible y fáciles de operar. •1o coloque este aparato sobre muebles que adultos o niños puedan tirar, inclinar o utilizar para subirse sobre ellos. 6i el aparato se cae, puede causar heridas graves o incluso la muerte.• Este aparato no debe ubicarse en una instalación cerrada como una estantería o un rack, a menos que esté adecuadamente ventilada. 9eriÀque que haya un espacio mínimo de 20 cm (7,8 pulg) alrededor del aparato.Símbolo de equipo de Clase IIEste símbolo indica que la unidad tiene un sistema de doble aislamiento.Conozca estos símbolos de seguridad El símbolo del rayo indica que los componentes sin aislamiento dentro de la unidad pueden generar descargas eléctricas. Para la seguridad de todas las personas de su hogar, no retire la cubierta del producto. El signo de exclamación indica las características del producto que pueden provocar problemas de funcionamiento y mantenimiento. Por eso, se recomienda leer el manual de instrucciones. ADVERTENCIA: Para reducir el riesgo de incendios o descargas eléctricas, no exponga el aparato a la lluvia ni a la humedad, ni coloque sobre él objetos que contengan líquidos (por ejemplo, jarrones). PRECAUCIÓN: Para evitar descargas eléctricas, el conductor ancho debe introducirse por completo en la ranura adecuada. Protección del productoUtilice únicamente un paño de microÀbra para limpiar el producto.Cuidado del medio ambiente Desecho del producto y de las pilas usadasEl producto ha sido diseñado y fabricado con materiales y componentes de alta calidad que pueden reciclarse y reutilizarse.Este producto puede contener plomo y mercurio. Es posible que la eliminación de estos materiales se encuentre bajo regulación debido a causas medioambientales. Para obtener información sobre la eliminación o el reciclaje, póngase en contacto con las autoridades locales.Este producto contiene pilas:• Deseche las pilas correctamente. 1o las arroje al fuego. Las pilas pueden explotar si se sobrecalientan.• 1o la envuelva en papel de aluminio o metal. Envuélvala en papel de periódico antes de deshacerse de ella.• Le sugerimos que se informe acerca de los puntos de recogida de pilas de su ciudad. • 9isite www.call2recycle.org para obtener más información sobre centros de reciclaje para pilas recargables de su zona.Aviso de cumplimientoEl dispositivo cumple con los reglamentos de la F&&, apartado . El funcionamiento está sujeto a las siguientes condiciones:a El dispositivo no debe causar interferencias nocivas yb debe recibir todo tipo de interferencias, incluso las que originan un funcionamiento indeseado.Normas de la Comisión Federal de Comunicaciones (FCC)Este equipo se ha probado y se ha determinado que cumple con los límites para un dispositivo digital clase %, de acuerdo con el apartado  de las normativas de la F&&. Estos límites están destinados a ofrecer una protección razonable contra interferencias dañinas dentro de una instalación residencial. Este equipo genera, utiliza y puede emitir energía de radiofrecuencia. 6i no se instala y utiliza de conformidad con el manual de instrucciones, puede ocasionar interferencias perjudiciales en las comunicaciones de radio.6in embargo, no existe garantía de que no se producirá interferencia en una instalación en particular. 6i este equipo provoca interferencias perjudiciales en la recepción de radio o televisión, lo que puede determinarse al encender y apagar el equipo, se recomienda al usuario intentar corregir la interferencia mediante una o varias de las siguientes medidas:• &ambie la posición de la antena receptora.• $umente la distancia entre el equipo y el receptor.• &onecte el equipo a un tomacorriente de un circuito diferente al que está conectado el receptor.• Para obtener ayuda, comuníquese con el distribuidor o con un técnico de radio o televisión caliÀcado.Normas sobre la exposición a campos de radiación de la FCC: este equipo cumple con la normativa que regula los límites de exposición a la radiación de F&& para ambientes no controlados. Este equipo debe instalarse y utilizarse con una distancia mínima de 20 cm entre el radiador y el cuerpo. 1o coloque este aparato cerca de otros transmisores o antenas, ni lo utilice con este tipo de dispositivos.Advertencia: &ualquier alteración o modiÀcación a este dispositivo, que no cuente con la autorización expresa de Gibson Innovations, puede anular el derecho del usuario para utilizar el equipo.1umero de modelo: %/71ombre comercial: PhilipsParte responsable: PF U6$, Inc. P2 %ox 228 $lpharetta, G$ 002-228  (8) 22-07Canadá: &$1 I&E6-(%)/1M%-(%)Este dispositivo cumple con los estándares R66 exentos de licencia de Industry &anada. El funcionamiento queda sujeto a las siguientes condiciones: () este dispositivo no debe producir interferencias dañinas, y (2) debe soportar cualquier interferencia, incluso aquéllas que pueden causar un funcionamiento no deseado.México:La operación de este equipo está sujeta a las siguientes dos condiciones: () es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248ONE (1) YEAR LIMITED WARRANTYWARRANTY COVERAGE:This warranty obligation is limited to the terms set forthbelow.WHO IS COVERED: This product is warranted to the original purchaser or the per-son receiving the product as a gift against defects in materials andworkmanship as based on the date of original purchase(“Warranty Period”) from an Authorized Dealer. The originalsales receipt showing the product name and the purchase datefrom an authorized retailer is considered such proof. WHAT IS COVERED:This warranty covers new products if a defect in materialor workmanship occurs and a valid claim is received within the Warranty Period. At its option, the company will either (1)repair the product at no charge, using new or refurbishedreplacement parts, or (2) exchange the product with a productthat is new or which has been manufactured from new, or ser-viceable used parts and is at least functionally equivalent or mostcomparable to the original product in current inventory,or (3) refund the original purchase price of the product.The company warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty,whichever provides longer coverage for you. When a product orpart is exchanged, any replacement item becomes your propertyand the replaced item becomes the company property. When a refund is given, your product becomes the company property. Note: Any product sold and identified as refurbished orrenewed carries a ninety (90) day limited warranty.Replacement product can only be sent if all warrantyrequirements are met. Failure to follow all requirementscan result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-TATIONS:This Limited Warranty applies only to the new products that can be identified by the trademark, trade name, or logo affixedto it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. The company is not liable for any damage to or loss of any ,programs data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.This warranty does not apply (a) to damage caused by accident,abuse, misuse, neglect, misapplication, or non-Philips product, (b)to damage caused by service performed by anyone other thanan Authorized Service Location, (c) to a product ora part that has been modified without written permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS”without warranty of any kind by including refurbished Philipsproduct sold “AS IS” by some retailers.This Limited Warranty does not cover:sShipping charges to return defective product. sLabor charges for installation or setup of the product, adjust-ment of customer controls on the product, and installation orrepair of antenna/signal source systems outside of the product.sProduct repair and/or part replacement because of improperinstallation or maintenance, connections to improper voltagesupply, power line surge, lightning damage, retained images orscreen markings resulting from viewing fixed stationary con-tent for extended periods, product cosmetic appearance itemsdue to normal wear and tear, unauthorized repair or othercause not within the control of the company.sDamage or claims for products not being available for use, orfor lost data or lost software.sDamage from mishandled shipments or transit accidents whenreturning product.sA product that requires modification or adaptation to enableit to operate in any country other than the country for whichit was designed, manufactured, approved and/or authorized, orrepair of products damaged by these modifications. sA product used for commercial or institutional purposes(including but not limited to rental purposes).sProduct lost in shipment and no signature verification receiptcan be provided.sFailure to operate per Owner’s Manual.TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,PUERTO RICO, OR U.S. VIRGIN ISLANDS…Contact Customer Care Center at:1 (866) 226-6074REPAIR OR REPLACEMENT AS PROVIDED UNDER THISWARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLELAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY ORFITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCTIS LIMITED IN DURATION TO THE DURATION OF THISWARRANTY. Some states do not allow the exclusions or limitation of inciden-tal or consequential damages, or allow limitations on how long animplied warranty lasts, so the above limitations or exclusions maynot apply to you.This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.B5/37_Safety_V1.0.indd 1 6/17/2015 5:46:41 PMLe dispositif rencontre l'exemption des limites courantes d'evaluation dans la section 2.5 de RSS 102 etla conformite a l'exposition de rf, utilisateurs peut obtenir l'information canadienne sur l'expositionRSS-102la conformite de rf.The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Français1 ImportantLisez attentivement toutes les instructions avant d’utiliser le téléviseur. 6i des dommages sont causés par le non-respect des instructions, la garantie ne sera pas applicable.Aide et soutienPour un service complet à la clientèle en ligne, visitez le site www.philips.com/support pour effectuer les opérations suivantes :• télécharger le manuel d’utilisation et le guide de démarrage rapide• regarder des didacticiels vidéo (pour certains modèles seulement)• trouver des réponses aux questions les plus fréquentes (F$4)• nous envoyer une question par courriel• clavarder avec un de nos représentants du service à la clientèle6uivez les instructions sur le site Web pour sélectionner votre langue, ensuite entrez le numéro de modèle de votre produit. 9ous pouvez également communiquer avec le service à la clientèle dans votre pays. 1otez auparavant le numéro de modèle et le numéro de série de votre produit. 9ous pouvez trouver cette information à l’arrière de votre appareil.Consignes de sécurité importantes • Lisez ces instructions. • Conservez ces instructions. • Tenez compte de tous les avertissements. • Suivez toutes les instructions. • N’utilisez pas cet appareil près de l’eau. • Nettoyez l’appareil avec un chiffon sec seulement. • N’obstruez aucune prise de ventilation. Installez l’appareil en conformité avec les instructions du fabricant. • N’installez pas l’appareil près d’une source de chaleur comme un radiateur, un registre de chaleur ou un autre appareil (incluant les ampliÀcateurs) qui produit de la chaleur. • Ne passez pas outre les instructions de sécurité concernant la Àche polarisée ou la Àche de mise à la terre. Une Àche polarisée est composée de deux broches dont l’une est plus large que l’autre. Une Àche de mise à la terre est composée de deux broches et d’une broche de masse. La broche plus large et la broche de masse visent à assurer votre sécurité. 6i la Àche fournie ne peut être insérée dans la prise, consultez un électricien pour qu’il remplace votre prise désuète.• Protégez le cordon d’alimentation de faoon à ce qu’il ne puisse pas être écrasé ou pincé vériÀez particulièrement les Àches, les prises et la sortie du Àl dans l’appareil.• Utilisez seulement les accessoires spéciÀés par le fabricant. • Utilisez seulement le chariot, le support, le trépied ou la table spéciÀés par le fabricant ou vendu avec l’appareil. 6i vous utilisez un chariot, faites attention lorsque vous le déplacez aÀn d’éviter de vous blesser en cas de renversement de l’appareil.• Débranchez cet appareil pendant les orages avec éclairs ou s’il n’est pas utilisé pendant de longues périodes. • Toute réparation doit être faite par un technicien qualiÀé. Une réparation est nécessaire quand l’appareil a été endommagé, par exemple, quand le cordon ou la Àche d’alimentation ont été endommagés, quand un objet a été introduit dans l’appareil ou quand l’appareil a été mouillé, exposé à la pluie ou à l’humidité, qu’il ne fonctionne pas correctement ou qu’il a été échappé. • AVERTISSEMENT relatif à l’utilisation de piles ² $Àn d’éviter une fuite des piles pouvant entraîner des blessures ou des dommages matériels :• Installez toutes les piles correctement en alignant les pôles + et - tel qu’indiqué sur l’appareil.• 1e combinez pas des piles différentes (neuves et usagées, au carbone et alcalines, etc.).• Retirez les piles lorsque l’appareil n’est pas utilisé pendant une longue période.• Les piles intégrées ne doivent pas être exposées à une chaleur excessive, comme les rayons du soleil ou le feu.• Produits contenant du perchlorate : une manipulation particulière peut être requise. &onsulter www.dtsc.ca.gov/hazardouswaste/perchlorate.• L’appareil ou sa télécommande peuvent contenir une pile bouton qu’un enfant pourrait avaler. Gardez ce type de pile hors de portée des enfants à tout moment! En cas d’ingestion, la pile peut provoquer des blessures sérieuses voire la mort. De graves brûlures internes peuvent survenir dans les deux heures suivant l’ingestion.• 6i vous croyez qu’une pile a été ingérée ou introduite dans le corps de quelqu’un, consultez immédiatement votre médecin.• Lorsque vous changez les piles, assurez-vous que les piles neuves et usagées sont hors de portée des enfants. Une fois le changement de pile effectué, assurez-vous que son compartiment est bien fermé et sécurisé.• 6i vous ne parvenez pas à sécuriser le compartiment de la pile, cessez d’utiliser l’appareil. Gardez l’appareil hors de portée des enfants et communiquez avec le fabricant.• N’exposez pas l’appareil aux éclaboussures, ni aux déversements.• Ne placez aucune source de danger sur l’appareil (par exemple des objets remplis de liquide ou des bougies allumées).•&et appareil peut contenir du plomb et du mercure. Mettez l’appareil au rebut conformément aux lois municipales, provinciales ou fédérales. Pour en savoir plus sur la mise au rebut ou sur le recyclage, veuillez communiquer avec les autorités locales. Pour de plus amples renseignements sur les diverses possibilités de recyclage, visitez les sites www.mygreenelectronics.com, www.eiae.org ou www.recycle.philips.com.•6i la Àche d’alimentation ou un coupleur d’appareil est utilisé comme dispositif de découplage, celui-ci doit rester facilement accessible.•1e placez pas cet appareil sur un meuble qu’un enfant pourrait faire basculer ou qu’un adulte pourrait renverser involontairement en s’appuyant ou en grimpant dessus ou encore en le tirant. La chute d’un appareil peut provoquer des blessures graves, voire la mort.• &et appareil ne doit pas être placé dans un meuble encastré comme une bibliothèque ou une étagère, à moins que l’emplacement offre une ventilation sufÀsante. 9eillez à garder un espace dégagé d’au moins 20 cm (7,8») autour de cet appareil.Symbole d’équipement de classe II&e symbole signiÀe que l’appareil sur lequel il est apposé est doté d’une double isolation.Sachez reconnaître ces symboles de sécurité &e symbole ©d’éclair» signale des matériaux non isolés présents dans votre appareil et pouvant causer un choc électrique. Pour assurer la sécurité des membres de votre famille, veuillez ne pas enlever le couvercle du produit. Les ©points d’exclamation» ont pour but d’attirer votre attention sur des caractéristiques à propos desquelles vous devez lire attentivement la documentation accompagnant l’appareil aÀn d’éviter tout problème de fonctionnement et d’entretien. AVERTISSEMENT : aÀn de réduire les risques d’incendie ou de choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. 1e posez pas dessus d’objets remplis de liquides, tels que des vases. ATTENTION : pour éviter les chocs électriques, introduisez la broche la plus large de la Àche dans la borne correspondante de la prise et poussez à fond. Précautions d’utilisation de votre appareilUtilisez seulement un chiffon en microÀbre pour nettoyer l’appareil.Respect de l’environnement 0LVHDXUHEXWGHYRWUHSURGXLWHWGHODSLOHHQÀQGHYLH&et appareil a été conou et fabriqué avec des matériaux et des composants de haute qualité pouvant être recyclés et réutilisés.&e produit peut contenir du plomb et du mercure. La mise au rebut de ces substances peut être réglementée aÀn de préserver l’environnement. &ontactez les autorités locales pour toute information concernant la mise au rebut ou le recyclage.&e produit est doté de piles :• Mettez les piles au rebut de manière adéquate. 1e les incinérez pas. Les piles peuvent exploser en cas de surchauffe.• 1e les enroulez pas dans une feuille métallique ou d’aluminium. Enroulez-les dans du papier journal avant de les jeter.• 1ous vous recommandons de contacter l’administration de votre ville pour connaître le(s) site(s) de recyclage de piles de votre zone. • Rendez-vous sur www.call2recycle.org pour plus d’informations sur les centres de recyclage dans votre région pour les piles rechargeables.Avis de conformité&e dispositif est conforme aux règlements de la F&&, partie . Le fonctionnement est assujetti aux deux conditions suivantes :a Cet appareil ne doit pas causer d’interférence préjudiciable etb l’appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement non désiré.Règlement de la FCC&et équipement a été testé et jugé compatible avec les limites s’appliquant aux appareils numériques de la classe %, conformément à l’article  du règlement de la F&&. &es limites ont été déÀnies pour fournir une protection raisonnable contre les interférences nuisibles dans le cadre d’une installation résidentielle. &et équipement génère, utilise et peut émettre de l’énergie radiofréquence et, s’il n’est pas installé ni utilisé conformément aux instructions, peut causer des interférences gênantes pour les communications radio.Rien ne garantit toutefois que des interférences ne surviendront pas dans une installation particulière. 6i cet équipement cause des interférences nuisibles pour la réception de la radio ou de la télévision, ce qui peut être déterminé en mettant l’équipement hors tension puis sous tension, l’utilisateur devra essayer de corriger ces interférences en effectuant une ou plusieurs des opérations suivantes :• Déplacez l’antenne de réception.• $ugmentez la distance entre l’équipement et le récepteur.• %ranchez l’équipement à une prise d’un circuit autre que celui sur lequel le récepteur est branché.• &onsultez le détaillant ou un technicien de radiotélévision expérimenté.Énoncé de la FCC sur l’exposition aux rayonnements radioélectriques : cet appareil est conforme aux limites d’exposition aux rayonnements radioélectriques de la F&& pour un environnement non contrôlé. &et appareil doit être installé et utilisé en conservant une distance minimale de 20 centimètres entre le radiateur et votre corps. &et émetteur ne doit pas être installé au même endroit qu’une autre antenne ou un autre émetteur, ni utilisé avec un tel dispositif.Avertissement : Tout changement ou toute modiÀcation apporté à cet appareil sans l’autorisation expresse de Gibson Innovations peut annuler le droit de l’utilisateur à utiliser l’équipement.1uméro de modèle Marque : PhilipsPartie responsable : PF U6$, Inc. P2 %ox 228 $lpharetta, G$ 002-228  (8) 22-07Canada : &$1 I&E6-(%)/1M%-(%)&et appareil est conforme aux normes R66 sans licence d’Industrie &anada. 6on fonctionnement est assujetti aux deux conditions suivantes : () l’appareil ne doit pas causer d’interférences nuisibles (2) l’appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement non désiré.Specifications are subject to change without notice2015 © Gibson Innovations Limited.All rights reserved.This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.HTL2140B_F7_Safety_V1.0P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248GARANTÍA LIMITADA DE UN (1) AÑOCOBERTURA DE GARANTÍA:La obligación de esta garantía se limita a los términos establecidos acontinuación.QUIÉNES ESTÁN CUBIERTOS:Este producto está garantizado al comprador original o a lapersonaque lo recibe como regalo contra defectos en los materiales y en la mano de obra, a partir de la fecha de la compra original ("períododegarantía")en el distribuidor autorizado.El recibo de ventas,donde aparecen el nombre delproducto y la fecha de la compra en un distribuidor autorizado, seconsiderará comprobante de esta fecha.LOQUEESTÁCUBIERTO:Esta garantía cubre productos nuevos si se produce algún defecto enel material o la mano de obra y se recibe un reclamo válido dentrodel período de garantía. A su propia discreción, la compañía dentrodel período de garantía. A su propia discreción, la compañía nuevas o reacondicionadas;(2)cambiará el producto por uno nuevo o que se ha fabricado con piezas nuevas o usadas utilizables, y que sea al menos funcionalmente equivalente o lo más parecido al producto original del inventario actual; o (3) reembolsará el precio de compra original del producto. La compañía garantiza productos o piezas de repuesto proporcionados bajo esta garantía contra defectos en los materiales y en la mano de obra durante noventa (90) días o por el resto de la garantía del producto original, lo que le promocione más cobertura. Cuando se cambia un producto o una pieza, el artículo que usted recibe pasa a ser de su propiedad y el que se le entrega pasa a ser propiedad de la compañía.Cuando se proporcione un reembolso, su producto pasa a ser propiedad la compañía.Nota: Cualquier producto que se venda y que esté identicomo reacondicionado o renovado tiene una garantía limitadade noventa (90) días.El producto de reemplazo sólo se puede enviar si se cumplentodos los requisitos de la garantía. El incumplimiento de talesrequisitos puede ocasionar un retardo.LO QUE NO SE CUBRE: EXCLUSIONES Y LIMITACIONES:Esta garantía limitada se aplica sólo a los productos nuevos que se pueden identificar por la marca registrada, el nombre comercial o por tener el logotipo correspondiente. Esta garantía limitada no se aplica a ningún producto de hardware ni de software que no sea Philips, incluso si viene empacado con el producto o si se vende junto con éste. Los fabricantes,proveedores o editores que no sean Philips pueden proporcionar una garantía por separado para sus propios productos empacados con el producto Philips.La compañía no es responsable por ningún daño o pérdida de programas,datos u otra información almacenados en algún medio contenido en el producto, ni por ningún producto o pieza que no sea Philips que no esté cubierta por esta garantía. La recuperación o la reinstalación de programas, datos u otra información no está cubierta por esta garantíalimitada.Esta garantía no se aplica (a) a daños causados por accidente, abuso, mal uso, negligencia, mala aplicación o a productos que no sean Philips; (b) a daño provocado por servicio realizado por Esta garantía le otorga derechos legales específicos. Usted puede tener otros derechos que varían entre los diferentes estados y provincias.cualquier persona distinta de un establecimiento de servicio autorizado; (c) a productos o piezas que se hayan modificado sin la authorización porescrito; (d) si se ha retirado o desfigurado cualquier número de serie; y tampoco se aplica la garantía a (e)productos, accesorios o insumos vendidos TAL COMO ESTÁN sin garantía de ningún tipo, lo que incluye productos Philips vendidos TAL COMO ESTÁN por algunos distribuidores.Esta garantía limitada no cubre:s Los costos de envío al devolver el producto defectuoso.sLos costos de mano de obra por la instalacion o configuración del producto, el ajuste de controles del cliente en el producto y la instalación o reparación de sistemas de antena o fuente de señal externos al producto.s La reparación del producto o el reemplazo de piezas debido a instalación o mantenimiento inadecuada, a conexiones hechas a un suministro de voltaje inadecuado, sobrevoltaje de la línea de alimentación, daño causado por relámpagos, imágenes retenidas o marcas en la pantalla producto de la visualización de contenido fijo durante periodos prolongados, reparaciones cosméticas debido al desgaste normal, reparaciones no autorizadas u otras causas que no se encuentren bajo el control de la compañía.s Daños o reclamos por productos que no están disponibles para su uso, por datos perdidos o por pérdida de software.s Daños debido a mala manipulación en el transporte o accidentes de envío al devolver el producto.sUn producto que requiera modificacion o adaptacion para permitir su funcionamiento en algún país que no sea el país para el que se diseñó, fabricó, aprobó y/o autorizó o la reparación de productos dañados por estas modificaciones.s Un producto que se use para propósitos comerciales o institucionales (lo que incluye, entre otros, los de alquiler).s La pérdida del producto en el envío y cuando no se pueda proporcionar una firma que verifique el recibo.s No operar según el Manual del propietario.PARA OBTENER AYUDA EN LOS EE.UU., EN CANADÁ,PUERTO RICO O EN LAS ISLAS VIRGENES DE LOS EE.UU...Comuníquese con el Centro de Atención al Cliente al:1 (866) 226-6074LA REPARACIÓN O EL REEMPLAZO, SEGÚN LO DISPONEESTA GARANTÍA, ES LA SOLUCIÓN EXCLUSIVA PARA ELCLIENTE. PHILIPS NO SERÁ RESPONSABLE DE LOS DAÑOSINCIDENTALES O INDIRECTOS QUE INFRINJAN ALGUNAGARANTÍA EXPRESA O IMPLÍCITA SOBRE ESTE PRODUCTO.CON EXCEPCIÓN DE LO QUE PROHÍBA LA LEY VIGENTE,TODA GARANTÍA IMPLÍCITA DE COMERCIABILIDAD YADECUACIÓN PARA UN PROPÓSITO PARTICULAR EN ESTEPRODUCTO ESTÁ LIMITADA EN DURACIÓN A LO QUEESPECIFIQUE ESTA GARANTÍA.Algunos estados no permiten las exclusiones ni la limitación delos daños incidentales o indirectos, ni permiten limitaciones sobrela duración de la garantía implícita, de modo que las limitacioneso exclusiones anteriores pueden no aplicarse a usted.P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248OGARANTIE LIMITÉE DE UN (1) ANCOUVERTURE DE GARANTIE:Cette provision pour garantie est limitée aux conditions établies ci-dessous.QUI EST COUVERT?La garantie du présent produit couvre l’acheteur original ou toute personne recevant le produit en cadeau contre tout défaut de matière oude main d’œuvre conformément à la date originale d’achat (« Période degarantie ») auprès d’un distributeur agréé. Le reçu de vente originalindiquant le nom du produit ainsi que la date d’achat d’un détaillantagréé est considéré comme une preuve d’achat.QU'EST-CE QUI EST COUVERT?Cette garantie couvre les nouveaux produits dans le cas où un défautde matière ou de main d’ uvre se présenterait et une réclamation valideétait présentée dans la période de garantie.La société pourra, à sa seulediscrétion: (1)réparer le produit gratuitement avecdes pièces de rechangeneuves ou remises à neuf; ou (2) échanger le produit pour un produitneuf ou ayant été fabriqué à partir de pièces neuvesou usagées en bonétat et au moins fonctionnellement équivalent ou comparable au produitd’origine actuellement en inventaire; ou (3) rembourser le prix d’achatinitial du produit. La société garantit les produits ou pièces deremplacement prévus sous cette garantie contre tout défaut de matière ou de mai d’œuvre à n partir de la date de remplacement ou de réparation, pour une période de quatre-vingt-dix (90) jours ou pour laportion restante de la garantie du produit d’origine, la plus longue de cescouvertures étant à retenir. Lorsqu’un produit ou une pièce est échangé,tout article de rechanged evient votre propriété et l’article remplacé devient la propriété de la société. Lorsqu’un remboursement est effectué,votre produit devient la propriété de la société.Remarque : tout produit vendu et identifié comme étant remisà neuf ou rénové porte une garantie limitée de quatre-vingt-dix(90) jours.Un produit de remplacement ne pourra être envoyé que si toutes les exigences de la garantie ont été respectées. Tout manquement de répondre à toutes les exigences pourra entraîner un délai.CE QUI N’EST PAS COUVERT - EXCLUSIONS ETLIMITATIONS:Cette garantie limitée ne s’applique qu’aux nouveaux produits pouvant être identifiés par la marque de commerce, le nom commercial ou le logoqui y sont apposés.Cette garantielimitée ne s’applique à aucun produitmatérielou logiciel non Philips,même si celui-ci est incorporé au produit ouvenduavec celui-ci.Les fabricants, fournisseurs ou éditeurs non-Philipspeuvent fournir une garantie séparée pour leurs propres produits intégrés au produit fourni.La société ne saurait être tenue pour responsable de tout dommage ou perte de programmes, données ou autres informations mis en mémoiredans tous les médias contenus dans le produit ou de tout produit ou piècenon-Philips non couvert par cette garantie. La récupération ou réinstallationdes programmes, données ou autres informations n’est pas couverte parcette garantie limitée. Cette garantie ne s’applique pas (a) aux dommagescausés par un accident, un abus, un mauvais usage une négligence, unemauvaise application ou à un produit non-Philips, (b) aux dommages causéspar un service réalisé par quiconque autre qu’un centre de service agréé, (c)à un produit ou pièce ayant été modifié sans permission écrite, ou(d) si tout numéro de série a été supprimé ou défiguré, ou (e) à un Cette garantie vous donne des droits légaux spécifiques. Il est possible que vous bénéficiiez de droits supplémentaires variant d'un État/Province à l'autre. œproduit, accessoire ou produit non durable vendu « TEL QUEL » sansgarantie de quelque description que ce soit par l’inclusion de produitsremis à neuf Philips vendu « TEL QUEL » par certains détaillants.Cette garantie limitée ne couvre pas:s les frais d’expédition pour le renvoi du produit défectueux.s les frais de main-d’œuvre pour l’installation ou la configuration du produit, le réglage des commandes sur le produit du client ainsi que l’installation ou la réparation du système d’antenne/source sonor externe au produit.s la réparation du produit et/ou le remplacement des pièces à cause d’une mauvaise installation ou d’un mauvais entretien, d’un raccorde- ment à une alimentation électrique incorrecte, d’une surtension temporaire, de dommages occasionnés par la foudre, d’une rémanence de l’image ou de marques à l’écran résultant de l’affichage d’un contenu stationnaire fixe pour une période de temps prolongée, de l’aspect esthétique du produit causé par une usure normale, d’une réparation non autorisée ou de toute autre cause non contrôlable par la société.s tout dommage ou réclamation pour des produits non disponibles à l’utilisation ou pour des données perdues ou logiciel perdu. s tout dommage causé par un mauvais acheminement du produit ou par un accident encouru lors du renvoi du produit.s un produit nécessitant une modification ou adaptation afin de permettre l’utilisation dans tout pays autre que celui pour lequel il était désigné, fabriqué, approuvé et/ou autorisé ou toute réparation du produit endommagé par ces modifications.s un produit utilisé à des fins commerciales ou institutionnelles (y compris mais non de façon limitative les fins de location).s un produit perdu lors de l’expédition sans preuve signée de la réception.s tout manquement d’exploiter le produit selon le manuel de l’utilisateur.POUR OBTENIR DE L’AIDE AUX ÉTATS-UNIS, AU CANADA, À PUERTO RICO OU AUX ÎLES VIERGES AMÈRICAINES …Communiquez avec le centre de service à la clientèle au:1 (866) 226-6074LA RÉPARATION OU LE REMPLACEMENT CONFORMÉMENT ÀCETTE GARANTIE CONSTITUE LE SEUL REMÈDE POUR LECONSOMMATEUR. PHILIPS N’EST AUCUNEMENT RESPONSABLEDE TOUT DOMMAGE ACCESSOIRE OU INDIRECT RÉSULTANT DELA VIOLATION DE TOUTE GARANTIE EXPRESSE OU IMPLICITESUR CE PRODUIT. SAUF DANS LAMESURE INTERDITE PAR LESLOIS APPLICABLES, TOUTEGARANTIE IMPLICITE DE QUALITÉLOYALE ET MARCHANDEOU D’UTILITÉ PARTICULIÈRE DUPRODUIT EST LIMITÉE DANSLE TEMPS À LA DURÉE DE CETTEGARANTIE.Certains états ne reconnaissent pas l’exclusion ou la limitation de la responsabilité pour dommages indirects ou accessoires, ou autorisentdes limitations sur la durée d’une garantie implicite, il est donc possibleque les limitations ou exclusions mentionnées cidessus soient sans effetdans votre cas.12 meses.- Televisores con y sin reproductor de video digital DVD, reproductores de discos de video digital DVD, reproductores de disco de video digital BLUE-RAY, grabadores reproductores de discos de video digital DVD, sistemas de cine en casa, radiograbadoras con y sin reproductor de disco compacto, video proyector (excepto la lámpara), mini sistemas de audio, equipos modulares, antenas de recepción de satélite, teléfonos, teléfonos inalámbricos, auto estéreos, tabletas electrónicas, Base para Ipod y bocinas inalámbricas (bluetooth).6 meses.- Radio relojes, radios A.M. /F.M, batería recargables y reproductores de audio digital MP3 (internet).24 meses.- Televisores Hoteleros LCD y ITV.90 días.- Accesorios, controles remotos, bocinas, micrófonos, audífonos y aparatos reconstruidos de LCD TV, DVD, Blue-Ray, Barras de audio y Sistemas de Teatro en casa.B5/37_Safety_V1.0.indd 2 6/17/2015 5:46:43 PM2015.6.17

Navigation menu