Gigaset Communications V100AM 1.9GHZ CORDLESS PHONE User Manual V100 kombi

Gigaset Communications GmbH 1.9GHZ CORDLESS PHONE V100 kombi

UserManual.wiki >

Gigaset Communications >

V100AM User Manual HTML Version

USERS MANUAL

User Guide

V100 DIGITAL CORDLESS PHONE

V100AM DIGITAL CORDLESS PHONE with DIGITAL ANSWERING MACHINE

DECT 6.0 DIGITAL TECHNOLOGY

black Pantone 1795 C Liebreich Medienproduktion

User Guide V100.indd 1User Guide V100.indd 1 03.03.2008 17:19:12 Uhr03.03.2008 17:19:12 Uhr

Verizon and the Verizon logos are trademarks of Verizon Trademark Services LLC.

All other trademarks are the trademarks of their respective owners.

Product photo may differ from actual product, however functionality remains

as stated above.

Speciﬁ cations are subject to change without notice.

UCZZ01951ZZ(0)

The handset at a glance

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / kombi_overview.fm / 12.3.08

The handset at a glance

1Display in idle status

2Charge status of the batteries

= e U (empty to full)

= flashes: batteries almost empty

= U flashes: batteries charging

3Display keys (page 11)

4Control key

t Access to Call Log list.

s Access to directory.

5Mute key

Mute/unmute microphone.

6End Call key, On/Off key

End call, cancel function, go back to idle sta-

tus, activate/deactivate handset (press and

hold in idle status)

72.5 mm socket (mono) for headset

8Pound (#) key

Enter symbol #

Keypad lock on/off (press and hold in idle

status)

Switch between uppercase/lowercase let-

ters for text entry.

9Redial/Pause key

Open redial list (in idle status) or insert a

dialing pause (when editing a number).

10 Microphone

11 Intercom/Hold/Conference key

Set up an internal call

Switch between external call and internal

handset, or transfer a call during external

call.

Set up a conference call with an external line

and an internal handset (press and hold in

hold-intercom mode).

12 Star (*) key

Ring tone on/off (press and hold)

Switch temporarily to tone dialing (DTMF).

Switch between AM and PM during time set-

ting.

Switch call list display format.

13 Talk/Flash key

Answer or start a call.

Key flashes: incoming call.

Add a flash (in the directory)

Send FLASH (when off hook).

14 Handsfree key

Answer or place a call in speaker mode.

Switch between speaker on and speaker off

(in off hook mode).

15 Voice mail

Connect to your voice mailbox.

16 Signal strength

ÄHandset is linked with the base station.

Ä flashes: out of range

Note:

Pictures in this user manual may differ from

the actual product.

911

ÄÕ e

INT 1

01/31 9:45AM

§§§§Menu§§§§

Note:

When only one handset is registered to the

base station, the key is redundant and

therefore has no function.

The base station at a glance

Verizon V100 / USA EN / A31008-M1908-R301-1-6019 / kombi_overview.fm / 12.3.08

The base station at a glance

Base station with answer machine

You can use the keys on the base station to

operate the integrated answer machine and

1Page key

Paging handsets (press briefly)

Start the registration procedure (press and

hold in idle mode). You will hear a beep.

2LED

– Is off when the line is free

– Is on when any handset links to the base

– Flashes when paging handsets and dur-

ing registration mode

3Erase key

Erase current message during playback

Erase all old messages (press and hold in idle

mode)

4On/Off key

Activate/deactivate answer machine.

5 Message counter (page 16)

Status information for answer machine

6Volume keys

Change ring tone volume (in idle mode or

during incoming calls)

Change volume of message playback or call

screening.

During message playback:

7Skip key

Skip to next message.

8ó key

Start/stop playback.

9 Repeat key

Skip back to beginning of the current mes-

sage (press once) or to the previous mes-

sage (press twice).

10 Skip to beginning of the next message.

Please remember:

If the answer machine is being operated from a

handset, or if it is recording a message, you can-

not operate it from the base station.

The base station at a glance

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / kombi_overview.fm / 12.3.08

Base station without answer machine

1 Registration/Paging key (see page 22)

Contents

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / V100_kombi_IVZ.fm / 12.3.08

Contents

The handset at a glance . . . . . . . . 1

The base station at a glance . . . . 2

Safety precautions . . . . . . . . . . . 5

Notes on the operating

instructions . . . . . . . . . . . . . . . . . . 6

Symbols used . . . . . . . . . . . . . . . . . . . . 6

Example: menu input . . . . . . . . . . . . . . 6

Verizon V100 and Verizon V100AM–

more than just a telephone . . . . . 7

First Steps . . . . . . . . . . . . . . . . . . . 7

Pack contents . . . . . . . . . . . . . . . . . . . . 7

Installing the base station . . . . . . . . . . 7

Setting up the handset for use . . . . . . . 8

Making calls . . . . . . . . . . . . . . . . 10

Making an external call . . . . . . . . . . . 10

Putting an external call on hold . . . . . 10

Ending a call . . . . . . . . . . . . . . . . . . . . 10

Answering a call . . . . . . . . . . . . . . . . . 10

Caller ID . . . . . . . . . . . . . . . . . . . . . . . 10

Handsfree operation . . . . . . . . . . . . . 10

Operating the handset . . . . . . . . 11

Control key . . . . . . . . . . . . . . . . . . . . . 11

Display keys . . . . . . . . . . . . . . . . . . . . 11

Returning to idle status . . . . . . . . . . . 11

Menu guidance . . . . . . . . . . . . . . . . . 12

Correcting incorrect entries . . . . . . . . 12

Using the directory and lists . . . 13

Directory . . . . . . . . . . . . . . . . . . . . . . . 13

Last number redial list . . . . . . . . . . . . 14

Calls list . . . . . . . . . . . . . . . . . . . . . . . 14

Writing and editing names . . . . . . . . . 15

Operating the answer

machine . . . . . . . . . . . . . . . . . . . . 16

Operation using the base station keys 16

Operation using the handset . . . . . . . 16

Setting up the answer machine . . . . . 19

Operating when on the move

(remote operation) . . . . . . . . . . . . . . . 20

Using the network mailbox . . . . 21

Configuring the network mailbox

for fast access . . . . . . . . . . . . . . . . . . . 21

Using several handsets . . . . . . . 22

Registering handsets . . . . . . . . . . . . . . 22

De-registering handsets . . . . . . . . . . . 22

Locating a handset ("paging") . . . . . . 22

Changing the base station . . . . . . . . . 22

Making internal calls . . . . . . . . . . . . . . 22

Accepting/rejecting call waiting . . . . . 23

Linking internal callers to

an external call . . . . . . . . . . . . . . . . . . 23

Handset settings . . . . . . . . . . . . . 24

Changing the name of a handset . . . . 24

Changing the display language . . . . . 24

Setting the display contrast . . . . . . . . 24

Activating/deactivating auto answer . 24

Adjusting the loudspeaker and earpiece

volume . . . . . . . . . . . . . . . . . . . . . . . . 25

Changing ring tones . . . . . . . . . . . . . . 25

Activating/deactivating the

key-touch tone . . . . . . . . . . . . . . . . . . 25

Base station settings . . . . . . . . . 25

Changing ring tones . . . . . . . . . . . . . . 25

System settings . . . . . . . . . . . . . . 26

Restoring the default settings . . 26

Appendix . . . . . . . . . . . . . . . . . . . 27

Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Contact with liquid . . . . . . . . . . . . . . . 27

Questions and answers . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . 27

Specifications . . . . . . . . . . . . . . . . . . . 28

FCC / ACTA Information . . . . . . . . . . . . 29

Safety precautions . . . . . . . . . . . . . . . 30

Service (Customer Care) . . . . . . . . . . . 32

End-user limited Warranty . . . . . . . . . 32

Index . . . . . . . . . . . . . . . . . . . . . . 36

Safety precautions

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / security.fm / 12.3.08

Safety precautions*)

*) also see page 30

Only use the power supply unit supplied as indicated on the underside of the

device.

Only insert approved rechargeable batteries of the same type.

Never use ordinary (non-rechargeable) batteries as they may pose a health

hazard or cause injury.

Do not charge the handset in charging unit or base station while the headset is

connected.

Make sure the rechargeable battery is inserted the right way round.

Use the battery specified in these operating instructions.

The phone may affect medical equipment so always switch your phone off

before entering hospitals or doctors’ practices.

Notice to Hearing Aid Wearers:

This phone system is compatible with inductively coupled hearing aids.

Do not operate the phone in places where there is a risk of explosion

(such as paint workshops).

Do not install the base station in bathrooms or shower rooms. The handset and

base station are not splash-proof (see page 42).

Drivers must not use the phone while driving.

The phone must be switched off at all times in an aircraft. Make sure it cannot

be switched on accidentally.

If you give your telephone to someone else you should also give them the oper-

ating instructions.

Dispose of batteries and the phone carefully. Do not pollute the environment.

Emergency numbers cannot be dialed if the keypad lock is activated!

‹

Notes on the operating instructions

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / notes-on-instructions.fm / 12.3.08

Notes on the operating

instructions

This section explains the meaning of cer-

tain symbols and typographical conven-

tions used in this user guide.

Symbols used

On/Off (example)

Select one of the two menu

functions specified.

~Enter digits or letters.

§Back§ The display keys' current func-

tions are shown reverse high-

lighted in the bottom display

line. Press the display key

below to launch the function.

qPress the top or the bottom of

the control key: scroll up or

down.

c/ Q/ * etc.

Press the corresponding key of

the handset.

Example: menu input

In the user guides, the steps you need to

perform are shown in abbreviated form.

This is illustrated below using "Changing

the display language" as an example.

Please proceed as described in the box

below.

§Menu§ ¢Settings ¢Handset ¢Language

¢English/ Español/ Français

¤With the handset in idle status, press

the right display key to open the main

menu.

¤Select Settings using the control key q

– press the control key at the top or

bottom.

¤Press the §OK§ display key to confirm the

function Settings.

The Settings submenu is displayed.

¤Press the bottom of the control key s

repeatedly until Handset is selected.

¤Press the §OK§ display key to confirm the

function.

The Handset submenu is displayed.

¤Press the bottom of the control key s

repeatedly until Language is selected.

¤Press the §OK§ display key to confirm the

function.

The Language submenu is displayed.

¤Select the language you want using

the control key q – press the control

key at the top or bottom.

¤Press the §OK§ display key to confirm the

selected language.

The language is now changed for all text.

Verizon V100 and Verizon V100AM– more than just a telephone

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / starting.fm / 12.3.08

Verizon V100 and Verizon

V100AM–

more than just a telephone

Your phone not only lets you store up to

50 phone numbers (page 13), it can do a

whole lot more:

uView missed calls on your phone

(page 14).

uSelect the 12- or 24-hour format for dis-

playing the time (page 9).

uECO DECT uses a power supply with

low power consumption. Your handset

reduces the transmission power

depending on its distance from the

base station (close-up range).

Headset socket

Which headsets are compatible?

Please call the Verizon Service number

1-866 374 3864 or contact us at

http://www.verizon.com for information.

Have fun using your new phone!

First Steps

Pack contents

uOne Verizon V100 or Verizon V100AM

base station

uOne telephone line cord

uOne AC adapter for base station

uOne User Guide

For Verizon V100-1 or Verizon V100AM-1

uOne Verizon V100H handset with bat-

tery cover

uTwo batteries

uOne belt clip

For Verizon V100-2 or Verizon V100AM-2

uTwo Verizon V100H handsets with bat-

tery cover

uOne Verizon V100C charging cradle

uOne AC adapter for charging cradle

uFour batteries

uTwo belt clips

For Verizon V100-3 or Verizon V100AM-3

uThree Verizon V100H handsets with

battery cover

uTwo Verizon V100C charging cradles

uTwo AC adapters for charging cradle

uSix batteries

uThree belt clips

Installing the base station

The base station is designed for use in

closed, dry rooms in a temperature range

of +41°F to +113°F.

Set up the base station at a central point

on the premises.

Please note:

uNever expose the phone to heat

sources, direct sunlight, or other elec-

trical appliances.

uProtect your phone from moisture,

dust, corrosive liquids, and vapors.

Note:

The transmission power of the base station is

nearly turned off when the handset is placed

in the base station and only one handset is reg-

istered on the base station.

Caution:

Do not charge the handset in charging unit or

base station while the headset is connected.

First Steps

Verizon V100 / USA EN / A31008-M1908-R301-1-6019 / starting.fm / 12.3.08

Range and reception strength

Range:

uUp to 984 feet in the open

uUp to 165 feet in buildings

Reception strength:

The display shows if the handset is linked

to the base station:

uÄ is on: handset is linked to the base

station.

uÄ flashes: no reception, handset is out

of range or not registered.

Connecting the base station

¤First connect the power adapter and

then the phone jack as shown below.

1 110-V power adapter

2 Back of the base station

3 Phone jack with phone cord

Please note:

uThe power adapter must be always

connected, as the phone will not oper-

ate without an electrical supply.

uYour answer machine is set to give a

standard announcement.

Setting up the handset for use

Inserting the batteries

¤Open the battery cover.

¤Insert the batteries according to the

correct polarity (see diagram).

¤Close the cover, and press the top so

that it clicks into place.

Caution:

Use only rechargeable UL-approved AAA bat-

teries. Never use a conventional (non-

rechargeable) battery or other battery types as

this could result in significant health risks and

personal injury. For example, the batteries

could explode. The phone could also malfunc-

tion or be damaged as a result of using batter-

ies that are not of the recommended type.

Note:

If attached, remove the belt clip before open-

ing the battery cover.

First Steps

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / starting.fm / 12.3.08

Attaching the belt clip

There are notches for attaching the belt

clip on the side of the handset at the same

height as the display.

¤Press the belt clip onto the back of the

handset so that the protrusions on the

belt clip engage with the notches.

Placing the handset in the base station

¤Place the handset in the base station

with the handset's display facing out-

wards.

Charging the batteries for the first time

¤To charge the batteries, leave the hand-

set in the base station or charging cra-

dle continuously for ten hours.

The alternately flashing battery icons =

U at the upper right of the display screen

indicate that the batteries are being

charged.

For questions and troubleshooting, see

page 27.

Setting the date and time

You should set the date and time, for

example, to ensure the correct time of

incoming calls is recorded.

To change the time and date, open the

input field using:

§Menu§ ¢s ¢Settings ¢Date/Time

¢Set Date/Time

~Enter the time and date with

10 digits, for example, Q

M 1 5Q11

5QN for January 15,

2008, 07:15 am. If the 12-

hour time format is set, use

the * key to switch between

am and pm.

§OK§ Press the display key to save

changes.

You can change the date and time format:

§Menu§ ¢s ¢Settings ¢Date/Time

¢Set Format

¤Choose between day/month and

month/day date formats:

s ¢Date Format ¢DD/MM/MM/DD

¤Choose between 12- and 24-hour time

formats:

s ¢Time Format ¢12 Hours/24 Hours

Area codes

To make a call using the incoming calls list

(page 14), your phone's area code must

be stored.

§Menu§ ¢s ¢Settings ¢System ¢Area

Code

~Enter your area code and press

§OK§.

Display in idle status

Once the phone is registered and the time

set, the idle display looks as shown here

(example). If the answer machine is acti-

vated, the header will also display the ans-

wer machine symbol Õ.

Your phone is now ready to use.

Note:

– If the handset has turned itself off because

its batteries are empty, and you then place

the handset into the base station, it will

turn on automatically.

– Only place the handset into the base sta-

tion or charging cradle specifically

intended for it.

– During handset operation, the battery icon

e indicates the charge status of the bat-

teries (page 1).

– The batteries may feel warm as they are

charging. This is not dangerous.

ÄÕ e

INT 1

01/31 9:45AM

§§§§Menu§§§§

Making calls

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / telefony.fm / 12.3.08

Making calls

Making an external call

External calls are calls using the outside

telephone network.

~c Enter the number and press

the Talk key cor Handsfree

key d.

To cancel the dialing operation, press the

End Call key a.

You are shown the duration of the call

while the call is in progress.

Putting an external call on hold

j Press the Int/Hold key.

The external call is put on hold..

Ending a call

a Press the End Call key.

Answering a call

The handset indicates an incoming call in

three ways: by ringing, by a display on the

screen, and by the flashing Talk key c.

You can accept the call by:

¤Pressing the Talk key c.

¤Pressing the Handsfree key d.

If the handset is in the base station or

charger and the Auto Answer function is

activated (page 24), the call will be

answered automatically when you lift the

handset from the base station or charger.

You can press the display key §Quiet§ to mute

the ring tone without answering the call.

You can answer the call as long the call is

shown on the display.

Caller ID

Caller ID (CID) is an optional subscription

service provided by your telephone serv-

ice provider. This feature supplies incom-

ing caller identification information that

will be displayed on your handset.

Call display with Caller ID/Name

If the number of the caller is stored in your

directory, you will see the caller's name.

The following is displayed in place of the

number:

uExternal, if no number is transmitted or

the caller has not subscribed Caller ID.

uWithheld, if the caller has withheld

Caller ID.

Handsfree operation

You can activate the speakerphone at any

time to provide handsfree operation dur-

ing a call.

Activating/deactivating handsfree

Activating while dialing

~d Enter the number and press

the Handsfree key.

¤You should inform your caller before

you use the handsfree function so that

the caller knows someone else is listen-

ing.

Switching between earpiece and

handsfree mode

dPress the Handsfree key.

During a call and when listening to the

answer machine, turn handsfree on or off.

For how to adjust the volume, see

page 25.

Note:

Dialing using the directory (page 13) or Calls

list (page 14) saves time re-entering numbers.

Note:

If you have registered only one handset to

your base station, the j has no function.

Use i key, if you want to talk to somebody

else without being heard by the external party.

Operating the handset

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / telefony.fm / 12.3.08

Operating the handset

Activating/deactivating the handset

aPress and hold the End Call

key.

Activating/deactivating the keypad

lock

# Press and hold the pound key.

Keypad Locked appears in the display when

the keypad lock is activated.

The keypad lock is deactivated automati-

cally if someone calls you. It is re-activated

when the call is finished.

Control key

1Control key

In the description below, the side of the

Control key (up, down), which you must

press depending on the operating situa-

tion , is marked in black, for example, t

for "press up on the Control key".

The Control key has different functions:

When the handset is in idle status

s Open the directory

tOpen call log list (page 14)

In input fields

You can use the Control key to move the

cursor backwards t or s forwards.

In the main menu, lists and submenus

t/ s Scroll up/down line by line.

When the handset is off the hook or when

the answer machine plays

t/ s Increase/decrease volume

Display keys

The function of the display keys changes

depending on the particular operating sit-

uation. Example:

1 The display keys' current functions are

shown on the bottom display line.

2 Display keys

The most important display symbols are:

§§§§§Menu§§§§ Open the main menu (in idle

mode) or the context-depend-

ant menu.

§§§§§Back§§§§ Go back one menu level.

§§§§§§§OK§§§§§§§ Confirm your choice or save

edited characters.

§§§§Clear§§§§§ Clear key: deletes one charac-

ter at a time from right to left

(press briefly) or all characters

(hold).

Returning to idle status

You can return to idle status from any-

where in the menu as follows:

¤Press the End Call key a.

Or:

¤Do not press any key: after 2 minutes,

the display will automatically return to

idle status.

Changes that you have not confirmed or

saved by pressing §OK§ will not be saved.

An example of the display in idle status is

shown on page 9.

§§§§§Back§§§§§ † §§§§Menu§§§§§1

Operating the handset

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / telefony.fm / 12.3.08

Menu guidance

Your phone's functions are accessed using

a menu that has a number of levels.

Main menu (first menu level)

¤Press the display key §Menu§ with the

handset in idle status to open the main

menu.

The main menu functions are shown on

the screen in a list.

To access a function, open the corre-

sponding submenu (next menu level):

¤Navigate to the function using the con-

trol key q.

¤Press the display key §OK§.

Submenus

The functions in the submenus are dis-

played as lists.

To access a function:

¤Scroll to the function with the control

key q and press §OK§.

Pressing the display key §Back§ returns you

to the previous menu level. a cancels

the operation.

Correcting incorrect entries

You can correct incorrect characters in the

text by navigating to the incorrect entry

using the control key. You can then:

uPress §§§§Clear§§§§§ to delete the character to

the left of the cursor.

uInsert characters to the left of the cur-

sor.

uOverwrite the (flashing) character

when entering the time and date, etc.

Using the directory and lists

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / direct_charges.fm / 12.3.08

Using the directory and lists

The options are:

uDirectory

uLast Number Redial list

uCalls list

You can store a maximum of 50 entries in

the directory. Each entry must consist of a

name and a number.

The directory is stored in the base station

and is shared by all registered handsets.

directory

Numbers that appear in a list, such as the

Calls list or the Last Number Redial list,can

be added to the directory. If you have

Caller ID and the name is transmitted, the

first 16 characters of the transmitted

name are copied to the name line.

A number is displayed:

§Menu§ ¢Copy To Dir.

¤Complete the entry as described in the

paragraph "Storing a number in the

directory" (see page 13).

Last number redial list

The Last Number Redial list contains the

ten numbers last dialed with the handset

(max. 32 digits). If one of the numbers is

in the directory, then the corresponding

name will be displayed.

Manual last number redial

kPress the key.

qSelect the entry.

c/dPress the Talk key or the

Handsfree key.

The number is dialed.

When displaying a name, you can have the

respective phone number displayed:

§Menu§ ¢View

Managing entries in the Last Number

Redial list

kPress the key.

qSelect the entry.

§Menu§§ Open menu.

The following functions can be selected

with q:

View (as in the directory, page 13)

Copy To Dir.

Copy an entry to the directory

(page 14)

Delete (as in the directory, page 13)

Delete List (as in the directory, page 13)

Calls list

Requirement: Caller ID Presentation (CIP,

page 10)

The numbers of the last 10 incoming calls

are stored.

¤With the handset in idle status, open

the directory by pressing the t (CID)

key.

Dialing with the calls list

t ¢q(select entry)

If necessary, press * key to

change number format for

dialing.

c/dPress the Talk key or the

Handsfree key.

The number is dialed.

Viewing an entry

t ¢q(select entry)

§View§ Press display key to view the

entry.

List entry

New messages are at the top. A list entry

contains the following information:

uList type (in header)

uStatus of entry (new entries are marked

with a star in the header)

uName of caller, if name is transmitted

via CID or stored in directory.

Number of caller, if only the number is

transmitted.

External, if no number is transmitted or

the caller has not subscribed Caller ID.

Withheld, if the caller has withheld

Caller ID.

You can add the number of the caller to

the directory (page 14).

Using the directory and lists

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / direct_charges.fm / 12.3.08

uDate and time of call (if set, page 9)

You can manage the entries as the entries

of the Last Number Redial list (see

page 14).

Writing and editing names

The following rules apply when creating

an entry:

uControl the cursor with q.

uCharacters are added to the cursor.

uPress the pound key # to switch

between uppercase and lowercase.

Press the pound key # before enter-

ing the letter.

Entering special characters

You can enter the special characters using

the key Q or 1.

Q .0,/:;"’!?*+-%\^~|

1 SPACE1@_#=<>

()&$[]{}

Operating the answer machine

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / answering_m+network-mailbox.fm / 12.3.08

Operating the answer

machine

You can operate the base station's answer

machine using the handset, using the key-

pad of the base station (page 1), or using

remote operation (from another phone/

cell phone).

Announcement mode

You can use the answer machine in two

different modes.

uIn Answer & Rec. mode, the caller hears

your announcement and can then

leave a message.

uIn Answer Only mode, the caller hears

your announcement but cannot leave a

message.

Operation using the base station

keys

You can use the base station keys for the

most commonly used functions of your

answer machine. For more information,

see page 2.

Status of message counter (see page 2)

Answer machine is off.

uMessage counter is off.

Answer machine is on.

u"0": no new messages.

uNumber above "0": number of old mes-

sages.

uNumber flashes: number of new mes-

sages.

u"--" flashes: memory is full

u"A": answer machine is being accessed

remotely or is playing an announce-

ment.

uSegments scrolling in circle: answer

machine is recording a message or

announcement.

Operation using the handset

While recording a message, you can auto-

matically listen through the loudspeakers

of the base station, if you have activated

call screening (see page 19).

You can also listen through the loudspeak-

ers of registered handsets:

§Screen§ Press the display key.

The handset loudspeaker is activated.

You can switch it off with the Handsfree

key d.

Switching the answer machine on/off

§Menu§ ¢Answer Machine ¢Ans On/Off

¢On/Off

§OK§ Press the display key to acti-

vate/deactivate the answer

machine.

The × icon is displayed on the screen.

The phone includes a prerecorded

announcement for the answer and record

mode and announce-only mode. If a per-

sonal announcement has not been

recorded, the corresponding prerecorded

announcement is used.

Recording a personal announcement/

announce only

§Menu§ ¢Answer Machine ¢Record OGM

Answer & Rec./Answer Only §OK§

Select the mode in which you

want to record the personal

announcement.

Record §OK§ Press the display key to start

recording.

You will hear the ready tone (short tone).

¤Now record your announcement (must

be at least 3 seconds long).

Note:

When recording your announcement, speak

directly into handset's microphone, as if

talking on the phone.

Operating the answer machine

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / answering_m+network-mailbox.fm / 12.3.08

§OK§ Press the display key to end

the recording.

Playback of the recorded announcement

will start automatically. You can record the

announcement again by repeating these

steps.

Please note:

uRecording ends automatically if the

maximum recording time of 60 sec-

onds has been reached.

uIf you cancel the recording, the prere-

corded announcement will be used.

uThe recording is canceled if the answer

machine memory is full.

¤If necessary, delete old messages

and repeat the recording.

Playing back announcements

§Menu§ ¢Answer Machine ¢Record OGM

Answer & Rec./Answer Only §OK§

Play §OK§ Press the display key to start

playback.

If a personal announcement has not been

recorded, the corresponding prerecorded

announcement is used.

Deleting announcements

§Menu§ ¢Answer Machine ¢Record OGM

Answer & Rec./Answer Only §OK§

Delete §OK§ Press the display key to delete

the personal announcement.

If no personal announcement

exists, you will hear an error

tone.

After deletion, the corresponding prere-

corded announcement will be used.

Selecting an announcement mode

You can choose between Answer & Rec.

and Answer Only.

§Menu§ ¢Answer Machine ¢Answer Mode

Answer & Rec./Answer Only §OK§

The selected mode is saved even after the

answer machine is deactivated.

Playing back messages

The date and time of each message is

logged (provided this has been set,

page 9) and displayed during playback.

Playing back new messages

New messages you have not yet listened

to are indicated by the Õ icon slowly

flashing and by the number of new mes-

sages flashing in the message counter of

the base station (page 2).

§Play§ Press the display key to start

playback.

The display now shows you the status of

your answer machine when playing back

new messages:

1 Date when message was recorded.

2New: you have not yet listened to the mes-

sage.

301/02: The first of two messages is played.

4 Time when message was recorded.

If you have...

uNew messages:

Note:

If the message memory is full when in Answer

& Rec. mode, the selection is interrupted and

you will receive instructions to delete old mes-

sages.

¥Delete old messages.

The answer machine automatically switches

back to the mode set once deletion is com-

plete, or you can select another recording

mode.

Play

New 01/02

01/31 09:45AM

§§§§§Back§§§§§ U§§§§Menu§§§§

Operating the answer machine

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / answering_m+network-mailbox.fm / 12.3.08

New (2) is displayed. The number of

messages (3) indicates only the

number of new messages: the first of

two new messages is played back.

uMessages that you have already lis-

tened to:

New (2) is not displayed. The number of

messages (3) indicates only the

number of old messages: 01/02 means

that the first of two old messages is dis-

played.

uNo messages:

No Messages appears on the display

screen.

An announcement tells you if there are

any new messages, just old messages, or

no messages.

If there are new messages, playback

begins with the first new message. After

the last new message, you will be

returned to the Play menu.

After a new message has been played

in full, its status becomes "old".

If the message concerned has been saved

with the date and time, you will hear an

appropriate announcement before play-

back begins.

Playing back old messages

You can listen to old messages if there are

no more new messages.

Menu§ ¢Answer Machine ¢Play

¢Line 1/Line 2

§OK§ Press the display key to start

playback.

Controlling playback

During message playback:

§Menu§ Press the display key to enter

the Options menu.

uRepeat

Repeat playback of actual message.

uNext/Previous

Jump to playback of the following or

previous message.

uDelete

Delete current message.

Deleting messages

You can delete old messages all at once or

individually.

Deleting all old messages

§Menu§ ¢Answer Machine ¢Delete Old

Msgs

Delete? §OK§ Press the display key to con-

firm you want to delete all old

messages.

If you have no old messages, you will hear

an error tone and No Messages will display

on the screen.

Deleting individual old messages

During playback:

§Menu§ ¢Delete

§OK§ Press the display key to delete

the current message.

Picking up a call from the answer

machine

You can pick up a call while the answer

machine is recording a message or being

operated remotely:

cPress the Talk key.

Recording stops and you can speak to the

caller.

If two seconds of the call have already

been recorded when you pick it up, the

call will be displayed as a new message.

You can accept the call on every handset.

Play

01/02

01/31 09:45AM

§§§§§Back§§§§§ U§§§§Menu§§§§

Play

No Messages

Operating the answer machine

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / answering_m+network-mailbox.fm / 12.3.08

Recording a memo

You can record a memo on your answer

machine, e.g. to leave a message to other

members of your family. It will be signaled

like a new message on your answer

machine.

§Menu§ ¢Answer Machine

Record Memo §OK§

Press the display key to start

recording.

You will hear the ready tone (short tone).

¤Now record your memo (must be at

least 3 seconds long).

§OK§ Press the display key to end

the recording.

Recording ends automatically if the maxi-

mum recording time of 3 minutes has

been exceeded.

Setting up the answer machine

The answer machine has already been

preconfigured at the factory. Make indi-

vidual settings using the handset.

Activating/deactivating call screening

While recording a message, you can listen

through the loudspeakers of registered

handsets and the base station.

§Menu§ ¢Answer Machine ¢Settings

¢Call Screening

If you use the handset for this setting:

Base/Handset

Select if you want to make the

setting for the handset or the

base station.

On/Off Press the display key §OK§ to

confirm your selection.

The default setting for the base station is

On; the default setting for the handset is

Off.

For call screening on the handset:

§Screen§ Press the display key to start

call screening.

Toll-Saver Mode – Call acceptance/

charge saving function for remote

operation

You can set when you want the answer

machine to respond to calls.

The options are: 2 Rings, 4 Rings, 6 Rings, 8

Rings, as well as the cost-saving setting

Toll Saver.

When Toll Saver is set, the following deter-

mines when the answer machine accepts

calls:

uIf no new messages are present, the

answer machine accepts calls after 4

Rings.

uIf new messages are present, the

answer machine accepts calls after 2

Rings.

When operating remotely, you know that

there are no new messages after 2 rings

have passed (otherwise the answer

machine would already have accepted

your call). There will be no call charges if

you hang up now.

§Menu§ ¢Answer Machine ¢Settings

¢Ring Delay ¢2 Rings/4 Rings/6 Rings/

8 Rings/Toll Saver

§OK§ Press the display key to con-

firm your selection.

Changing the language of voice

prompts and prerecorded

announcements

You can select English, Spanish, or French

as the language of voice prompts and pre-

recorded announcements.

§Menu§ ¢Answer Machine ¢Settings

¢Voice Language ¢English/Español/

Français

§OK§ Press the display key to con-

firm your selection.

Note:

The number of rings refers to the ring tones of

the base station. If you have selected another

ring tone, the number of rings you hear may

differ from the selected number of ring tones.

Operating the answer machine

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / answering_m+network-mailbox.fm / 12.3.08

Operating when on the move

(remote operation)

You can check or activate the answer

machine from any other telephone (hotel,

pay phone, etc.).

Requirements:

uThe phone you are using for remote

operation must have tone dialing

(DTMF), such that you hear different

tones when you press the keys.

uYou must activate Remote Access.

Activating Remote Access

§Menu§ ¢Answer Machine ¢Settings

¢Remote Access ¢On/Off

§OK§ Press the display key to con-

firm your selection.

Calling the answer machine and

playing back messages

~ Dial your own number.

;~ While listening to your

announcement, press the ;

key and enter the system PIN.

You will be informed whether any new

messages have been recorded. The mes-

sages are then played back. You can now

operate the answer machine using the

keypad.

Operating the answer machine using the

keypad

The following keys are used:

Activating the answer machine

~ Dial your own number.

¤Allow the phone to ring until the ring

back tone stops and the phone

answers.

~ Enter system PIN.

G Press the G key.

You will hear a beep. Your answer

machine is now activated and the acti-

vated announcement is played back.

Deactivating the answer machine

~ Dial your own number.

;~ While listening to your

announcement, press the ;

key and enter the system PIN.

9 Press the 9 key.

You will hear a beep. Your answer

machine is now deactivated.

0 Delete the playing message.

A Repeat the previous message.

B Play the message.

3 Skip to the next message.

G Turn on the answer machine.

H Stop message playback.

9 Turn off the answer machine.

; Enter the remote access code if

the answer machine is on.

Note:

After message playback, if no key operation

is detected for 10 seconds, the call will be

terminated.

Using the network mailbox

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / answering_m+network-mailbox.fm / 12.3.08

Using the network mailbox

The network mailbox is your network pro-

vider's answer machine within the net-

work. You cannot use the network mail-

box unless you have requested it from

your network provider.

Configuring the network mailbox

for fast access

Entering the network mailbox number

§Menu§ ¢Voice Mail ¢Settings

~ §OK§ Enter the number of the

network mailbox and press

§OK§.

The setting for fast access applies to all

Verizon V100H handsets.

If your network voice mail requires a pass-

word for access, it is possible to add a pass-

word by entering pauses immediately

after entering the mailbox access number,

then entering your password.

Calling your network mailbox

fPress and hold.

You are connected directly to

the network mailbox.

If you have new messages on your net-

work mailbox:

§Call§ Press the display key to call

your network mailbox.

dPress Handsfree key d, if

required. You hear the net-

work mailbox announcement.

For further operating steps, please refer to

the instructions provided by your mailbox

operator.

Using several handsets

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / registr_sett.fm / 12.3.08

Using several handsets

Registering handsets

You can register up to a total of five hand-

sets with your base station.

A Verizon V100H handset can be regis-

tered with up to four base stations.

Registering Verizon V100H handset

§Menu§ ¢Settings ¢Registration

¢Register HS

qSelect the base you want to

press §OK§. Bases that have

been registered will be marked

by ½.

~ Enter your PIN and press §OK§.

The handset will be registered.

De-registering handsets

You can de-register any registered handset

from your Verizon V100/Verizon V100AM.

§Menu§ ¢Settings ¢Registration

¢Unregister HS

~Enter your PIN and press §OK§.

QSelect the handset you want to

de-register and press §OK§.

§OK§ Press the display key to con-

firm deletion.

Locating a handset ("paging")

You can locate your handset using the

base station.

¤Press the Registration/Paging key on

the base station briefly.

¤All handsets will ring at the same time

("paging"), even if the ring tones are

switched off.

You can press the display key §Quiet§ to

mute the ring tone without answering

the call.

Ending paging

¤Briefly press the Registration/Paging

key on the base station or press the Talk

key c on the handset.

Changing the base station

If your handset is registered to more than

one base station, you can set it to a partic-

ular base station or to the base station

that has the best reception (Best Base).

§Menu§ ¢Settings ¢Registration

¢Select Base

qSelect one of the registered

base stations or Best Base and

press §OK§.

Making internal calls

Internal calls to other handsets registered

with the same base station are free.

jInitiate internal call.

qSelect the handset you want to

call and press §OK§.

Ending a call

a Press the End Call key.

Transferring a call to another handset

You can transfer an external call to

another handset (connect).

¤Initiate an internal call to the handset

you want to transfer the call to (see

above).

Attended call transfer

When the internal party answers:

Note:

If only two handsets are registered to the base,

the internal call will be established immedi-

ately after pressing jkey.

Using several handsets

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / registr_sett.fm / 12.3.08

¤If necessary, announce the external

call.

a Press the End Call key.

The external call is transferred to the other

handset.

If the internal party does not answer or

the line is busy, press the display key §End§

to return to the external call.

Unattended call transfer

a Press the End Call key.

The external call is directly transferred to

the other handset.

Then, if the internal party does not

answer, the call will automatically return

to you (the display will show External Call).

Hold while making internal call

When you are speaking to an external

party, you can simultaneously call an

internal party.

¤Initiate an internal call as described in

paragraph "Making internal calls" (see

page 22).

The external party hears the hold melody.

Use j key to switch between internal

and external party.

Ending the internal call

¤Ask the other internal party to end the

call.

You are reconnected to the external caller.

Accepting/rejecting call waiting

If you get an external call while conduct-

ing another external or an internal call,

you will hear the call waiting tone (short

tone). The caller's number or name will

appear on the screen if caller ID is ena-

bled.

Call waiting while conducting an internal

call

aPress the End Call key to end

the internal call.

¤Answer the external call as described in

paragraph "Answering a call" (see

page 10).

You are connected to the caller who

waited.

Call waiting while conducting an external

call

§Accept§ Press the display key to answer

the incoming external call.

The actual call is put on hold. You are con-

nected to the caller who waited. You have

got the following possibilities:

–Press talk key c to switch

between the callers.

–Press end call key a to end the call

with the online party.

Or:

aPress the End Call key to end

the existing external call.

¤Answer the external call as described in

paragraph "Answering a call" (see

page 10).

You are connected to the caller who

waited.

Linking internal callers to

an external call

Important: The Listening In function must

be activated.

You are conducting an external call. An

internal caller can listen in on this call and

take part in the conversation. The other

parties are made aware of additional lis-

teners by a signal tone.

Activating/deactivating Listening In

§Menu§ ¢Settings ¢System ¢Listening In

¢On/Off

Default setting is On.

Handset settings

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / registr_sett.fm / 12.3.08

Internal conference call

There are two ways of starting an internal

conference:

uanother handset can join the call via

Listening In

uyou can call another handset via j

key and add it to a conference

Joining the call via Listening In

The line is engaged with an external call.

You want to listen in on the existing

external call.

c/d Press the Talk key or Handsfree

key briefly.

You join the call. The other parties hear a

signal tone. On both handsets, you will

see Conference on the display.

Calling another handset and adding it to

the conference

¤Initiate an internal call as described in

paragraph "Making internal calls" (see

page 22).

When the called handset has answered

the call:

§Conf.§ Press the display key to start

the conference.

On both handsets, you will see Conference

on the display.

Ending conference call

a Press the End Call key.

The other parties hear a signal tone.

If the first internal party presses the End

Call key a, the handset that has entered

the conference call remains connected to

the external caller.

Handset settings

Your handset is preconfigured, but you

can change these settings to suit your

individual needs.

Changing the name of a handset

The names "INT 1", "INT 2", etc., are

assigned automatically during registra-

tion. You can change these names. The

number of the handset, however, never

changes. The changed name is only dis-

played on this handset.

§Menu§ ¢Settings ¢Handset ¢Handset

Name

~Enter the name and press §OK§.

The name must be no more

than 12 characters.

Changing the display language

You can view the display texts in different

languages.

§Menu§ ¢Settings ¢Handset ¢Language

¢English / Español / Français

qSelect a language and

press §OK§.

Setting the display contrast

You have a choice five different contrasts.

§Menu§ ¢Settings ¢Handset

¢Display Contr.

qSelect your preferred level and

press §OK§.

Activating/deactivating

auto answer

If you have activated this function, when

you get a call, you can simply lift the hand-

set out of the base station without having

to press the Talk key c.

§Menu§ ¢Settings ¢Handset ¢Auto

Answer ¢On/Off

Base station settings

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / registr_sett.fm / 12.3.08

Adjusting the loudspeaker and

earpiece volume

You can set the loudspeaker volume and

the earpiece volume to five different lev-

els. You can only make these adjustments

during a call.

The handsfree volume can only be

adjusted when this function is set.

You are conducting a call.

qIncrease or decrease the vol-

ume.

Changing ring tones

For how to set the ring tones of the base

station, see page 25.

Volume

You can choose between five volumes (0–

5; for example, volume 3 = ‰)

§Menu§ ¢Settings ¢Audio Settings ¢HS

Ring Volume

qSelect the volume and

press §OK§.

Ring tone melodies

You can choose between 15 different mel-

odies.

§Menu§ ¢Settings ¢Audio Settings ¢HS

Ring Tones

qSelect your preferred melody

and press §OK§.

Activating/deactivating the ring tone

You can deactivate the ring tone on your

handset before you answer a call or when

the handset is in idle status; the ring tone

can be deactivated permanently or just for

the current call.

Deactivating the ring tone permanently

*Press the star key and hold

until you no longer hear the

ring tone.

The Åicon appears in the display.

Reactivating the ring tone

*Press and hold the star key.

Deactivating the ring tone for the current

call

§Quiet§ Press the display key.

Deactivating the ring tone during incoming

call

sPress key until you do not hear

the ring tone any more.

Activating the ring tone during incoming

call

tPress key until ring tone vol-

ume reaches the desired level.

Activating/deactivating the

key-touch tone

Each key press is acknowledged by a beep.

You can deactivate this function:

§Menu§ ¢Settings ¢Audio Settings ¢Key

Touch Tone ¢On/Off

Base station settings

Changing ring tones

Volume

¤Use the volume keys ð and ñ on

the base station to adjust the volume of

the base station ring tone.

Ring tones

You can choose between 5 different melo-

dies.

§Menu§ ¢Settings ¢Audio Settings ¢Base

Ring Tones

qSelect your preferred melody

and press §OK§.

System settings

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / registr_sett.fm / 12.3.08

System settings

The system settings are carried out using a

registered Verizon V100H handset.

Protecting against unauthorized

access

Protect the system settings of the base sta-

tion with a PIN known only to you. The

system PIN must be entered when regis-

tering/de-registering a handset with/from

the base station.

Changing the system PIN

You can change the 4-digit system PIN set

on the base station (default setting: 0000)

to a 4-digit PIN known only to you.

§Menu§ ¢Settings ¢System ¢Change PIN

~Enter the old PIN and press

§OK§.

~Enter the new PIN and press

§OK§.

~To confirm, enter the new PIN

again and press §OK§.

Settings for connecting the base

station to the PABX

The following settings are only needed

when your PABX requires them. Please

refer to the user guide of your PABX.

Changing the dialing mode

The following dialing modes can be

selected:

uTone dialing (DTMF)

uPulse dialing (DP)

§Menu§ ¢Settings ¢System ¢Dialing

Mode ¢Tone/Pulse

qSelect dialing mode and press

§OK§.

Setting the flash time

§Menu§ ¢Settings ¢System ¢Flash Time

¢Short/Long

qSelect flash time (Short =

80ms, Long = 650ms) and

press §OK§.

Switching temporarily to

tone dialing (DTMF)

If your PABX still operates with pulse dial-

ing (DP), but you need tone dialing

(DTMF) for a connection (for example to

listen to the network mailbox), you must

switch to tone dialing for the call.

Requirement: You are conducting a call

or have already dialed an external

number.

§Menu§ ¢Tone Dialing

§OK§ Press display key to confirm.

Tone dialing is now activated for this call

only.

Restoring the default

settings

You can restore the default values for

most settings. When resetting, all hand-

sets remain registered and the directory

will not be deleted.

§Menu§ ¢Settings ¢System ¢Reset

§OK§ Press the display key to con-

firm reset.

Caution:

Do not forget the new system PIN! If you forget

it, you must reset your phone to default set-

tings (see below).

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

Appendix

Care

¤Wipe the base station and handset with

a damp cloth (do not use solvents) or

an antistatic cloth.

Never use a dry cloth. This can cause

static.

Contact with liquid

If the handset has come into contact with

liquid:

1. Immediately switch the handset off

and remove the batteries.

2. Allow the liquid to drain from the hand-

set.

3. Pat all parts dry, then place the hand-

set, with the battery compartment

open and the keypad facing down, in a

dry, warm place for at least 72 hours

(not in a microwave oven, convection

oven, etc.).

4. Do not switch on the handset again

until it has completely dried.

When it has fully dried, you should be able

to use it again normally.

Questions and answers

If you have any questions about the use of

your telephone, you can contact us at any

time at

http://www.verizon.com

The table below (page 27) contains a list

of common problems and possible solu-

tions.

Troubleshooting

The display is blank.

1. The handset is not switched on.

¥Press a and hold the End Call key.

2. The batteries are empty.

¥Charge or replace the batteries (page 8).

The handset does not respond to a key press.

The keypad lock is activated.

¥Press and hold the pound key #

(page 11).

Base Search and Ä is flashing on the display

screen.

1. The handset is outside the range of the base

station.

¥Reduce the distance between handset/

base station.

2. The handset has been de-registered. Please

¥Register the handset (page 22).

3. The base station is not switched on.

¥Check the base station power cord

(page 8).

Handset does not ring.

The ring tone is switched off.

¥Activate the ring tone (page 25).

You cannot hear the ring tone/dialing tone.

Base station's phone cord has been replaced.

¥When purchasing a new cord, make sure

that it has the correct pin connections.

¥Correct phone jack assignment

The other party cannot hear you.

You have pressed the i (INT) key. The hand-

set is on hold.

¥Switch the microphone on again (page 1).

1unused

2unused

5unused

6unused

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

Specifications

Recommended batteries

Nickel-metal hydride (NiMH):

The handset is supplied with the author-

ized AAA batteries.

Handset operating times/charging

times

The operating and charge times apply only

when using the recommended batteries.

Base station power consumption

In standby mode: approx. 1.5 watts

During a call: approx. 2 watts

General specifications

The incoming call number is not displayed

although CID is set.

Caller ID is not enabled.

¥The caller must ask the network provider to

activate Caller ID (CID).

You hear an error tone when keying an

input.

Action has failed/invalid input.

¥Repeat the operation.

Watch the display and refer to the operating

instructions, if necessary.

You cannot listen to messages left on the

network mailbox.

Your phone system is set for pulse dialing.

¥Set your phone system to tone dialing.

The calls list does not indicate the correct

time messages were received.

The date/time is not set.

¥Set the date/time (page 9).

You hear an error beep from the answer

machine during remote operation.

The system PIN entered is incorrect.

¥Enter the system PIN again.

You cannot operate the answer machine via

remote operation.

Remote Access is not activated.

¥Activate Remote Access (see page 20)

The answer machine does not record mes-

sages/has switched to "announce only".

Its memory is full.

¥Delete old messages.

¥Play back new messages and delete.

Capacity 550 mAh

Standby time Approx. 130 hours

(5.5 days)

Talk time Approx. 10 hours

Charge time Approx. 10 hours

DECT 6.0 is supported

No. of channels 60 duplex channels

Radio frequency

range 1920–1930 MHz

Duplex method Time multiplex, 10 ms

frame length

Channel grid 1728 kHz

Bitrate 1152 kbit/s

Modulation GFSK

Language code 32 kbit/s

Transmission

power

10 mW, average power per

channel

Range up to 984 feet outdoors,

up to 165 feet indoors

Base station

power supply 110 V ~/60 Hz

Environmental

operating condi-

tions

+41°F to +113°F;

20% to 75% relative

humidity

Dialing mode DTMF (tone dialing)/DP

(pulse dialing)

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

FCC / ACTA Information

Warning: Changes or modifications to this

unit not expressly approved by Siemens

Cordless Products could void the FCC authority

to operate the equipment. This includes the

addition of any external antenna device.

This equipment complies with Part 68 of the

FCC rules and the requirements adopted by the

ACTA. On the bottom of the base station is a

label that contains, among other information,

a product identifier in the format

US:AAAEQ##TXXXX. If requested, this number

must be provided to the telephone company.

A plug and jack used to connect this equipment

to the premises wiring and telephone network

nust comply with the applicable FCC Part 68

rules and requirements adopted by the ACTA.

A compliant telephone cord and modular plug

is provided with this product. It is designed to

be connected to a compatible modular jack that

is also compliant. See installation instructions

for details.

The REN is used to determine the number of

devices that may be connected to a telephone

line. Excessive RENs on a telephone line may

result in the devices not ringing in response to

an incoming call. In most but not all areas, the

sum of RENs should not exceed five (5.0). To be

certain of the number of devices that may be

connected to a line, as determined by the total

RENs, contact the local telephone company.

For products approved after July 23, 2001, the

REN for this product is part of the product iden-

tifier that has the format US:AAAEQ##TXXXX.

The digits represented by ## are the REN with-

out a decimal point (e.g., 03 is a REN of 0.3).

For earlier products, the REN is separately

shown on the label.

If this equipment causes harm to the telephone

network, the telephone company will notify you

in advance, that temporary discontinuance of

service may be required. But if advance notice

isn’t practical, the telephone company will

notify the customer as soon as possible. Also,

you will be advised of your right to file a com-

plaint with the FCC if you belive it is necessary.

The telephone company may make changes in

its facilities, equipment, operations or proce-

dures that could affect the operation of the

equipment. If this happens the telephone com-

pany will provide advance notice in order for

you to make necessary modifications to main-

tain uninterrupted service. If you experience

trouble with this telephone system, disconnect

it from the network until the problem has been

corrected or until you are sure that the equip-

ment is not malfunctioning.

If trouble is experienced with this equipment,

for repair or warranty information, please con-

tact Verizon Support at 1-866 374 3864. If the

equipment is causing harm to the telephone

network, the telephone company may request

that you disconnect the equipment until the

problem is resolved. This equipment is of a type

that is not intented be repaired by the Customer

(user).

This telephone system may not be used on coin

service provided by the telephone company.

Connection to party line service is subject to

state tariffs. Contact the state public utility

commission, public service commission or cor-

poration commission for information. Privacy

of communications may not be ensured when

using this phone.

If your home has specially wired alarm equip-

ment connected to the telephone line, ensure

the installation of this equipment does not dis-

able your alarm equipment. If you have ques-

tions about what will disable alarm equipment,

consult your telephone company or a qualified

installer.

This telephone system equipment has been

tested and found to comply with the limits for

Class B digital device, pursuant to Part 15 of the

FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) This device must

accept any interference received, including

interference that may cause undesired opera-

tion. These limits are designed to provide

reasonable protection against harmful interfer-

ence in a residential installation. Some cordless

telephones operate at frequencies that may

cause interference to nearby TV’s and VCR’s;

to minimize or prevent such interference, the

system base should not be placed near or on

top of a TV or VCR; and, if interference is expe-

rienced, moving the base farther away from

the TV or VCR will often reduce or eliminate

the interference.

However, there is no guarantee that interfer-

ence will not occur in a particular installation.

If this telephone system does cause harmful

interference to radio or television reception,

which can be determined by turning the system

off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the base

station and receiver.

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

3. Connect the base station into an outlet on a

circuit different from that to which the receiver

is connected.

4. Consult the dealer or an experienced radio

TV technician for help.

Notice for Direct Inward Dialing ("DID")

ALLOWING THIS EQUIPMENT TO BE OPERATED

IN SUCH A MANNER AS TO NOT PROVIDE FOR

PROPER ANSWER SUPERVISION AS A VIOLATION

OF PART 68 OF THE FCC‘S RULES.

Notice to Hearing Aid Wearers:

This phone system is compatible with induc-

tively coupled hearing aids.

Power Outage:

In the event of a power outage, your cordless

telephone will not operate. The cordless tele-

phone requires electricity for operation. You

should have a telephone that does not require

electricity available for use during power out-

ages.

Notice:

The installation of the base unit should allow

at least 8 inches between the base and persons

to be in compliance with FCC RF exposure

guidelines.

For body worn operation, the portable part

(handset) has been tested and meets FCC RF

exposure guidelines. Use with an accessory

that contains metal parts may not ensure com-

pliance with FCC RF exposure guidelines.

Notice to telephone company service:

If you need service from your telephone com-

pany, please provide them with the information

– Facility interface Code (FIC): 02LS2

– Service Order Code (SOC): 9.0Y

– Universal Service Order Code (USOC)

Jack: RJ11C

as indicated on the label on the bottom side of

the base station.

Safety precautions

Before using your telephone equipment, basic

safety instructions should always be followed to

reduce the risk of fire, electric shock and injury

to persons.

1. Read and understand all instructions.

2. Follow all warnings and instructions marked

on the product.

3. Unplug this product from the wall telephone

jack and power outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use

damp cloth for cleaning.

4. Do not use this product near water, for exam-

ple, near a bathtub, wash bowl, kitchen sink, or

laundry tub, in a wet basement or near a swim-

ming pool.

5. Place this product securely on a stable sur-

face. Serious damage and/or injury may result if

the unit falls.

6. Slots or openings in the cabinet and the back

and bottom are provided for ventilation, to pro-

tect it from overheating. These openings must

not be blocked or covered. This product should

never be placed near or over a radiator or heat

is not provided.

7. This product should be operated only from

the type of power source indicated on the

marking label. If you are not sure of the type of

power supply to your home, consult your dealer

or local power company.

8. Do not place objects on the power cord.

Install the unit where no one can step or trip on

the cord.

9. Do not overload wall outlets and extension

cords as this can result in the risk of fire or elec-

tric shock.

10. Never push objects of any kind into this

product through cabinet slots as they may

touch dangerous voltage points or short out

parts that could result in the risk of fire or elec-

tric shock. Never spill liquid of any kind on this

product.

11. To reduce the risk of electric shock or burns,

do not disassemble this product. Take it to a

qualified service center when service is

required. Opening or removing covers may

expose you to dangerous voltages, dangerous

electrical current or other risks. Incorrect reas-

sembly can cause electric shock when the appli-

ance is subsequently used.

12. Unplug the product from the wall outlet and

refer servicing to qualified service personnel

under the following conditions:

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

a.) When the power cord is damaged or frayed.

b.) If liquid has been spilled into the product.

c.) If the product has been exposed to rain or

water.

d.) If the product does not operate normally by

ing the operating instructions. Adjust only

those controls

that are covered by the operating

instructions because improper adjustment of

other controls may result in damage and may

require extensive work by a qualified technician

to restore the product to normal operation.

e.) If the product has been dropped or physi-

cally has been damaged.

f.) If the product exhibits a distinct change in

performance.

13. Avoid using a telephone (other than a cord-

less type) during a thunderstorm. There may be

a remote risk of electrical shock from lightning.

Therefore we suggest a surge arrestor.

14. Do not use the telephone to report a gas

leak in the vicinity of the leak.

15. Emergency/911 numbers may not be dialed

if the keypad is locked.

16. Minimum No. 26 AWG telecommunication

line cord must be used with this phone.

BATTERY SAFETY PRECAUTIONS

To reduce the risk of fire, injury or electric

shock, and to properly dispose of batteries,

please read and understand the following

instructions.

CONTAINS ALKALINE NICKEL METAL HYDRIDE

BATTERY. BATTERY MUST BE RECYCLED OR DIS-

POSED OF PROPERLY. DO NOT DISPOSE OF IN

MUNICIPAL WASTE.

1. Only use the batteries specified for use with

this product.

2. DO NOT USE ALKALINE NICKEL CADMIUM OR

ALKALINE LITHIUM BATTERIES, or mix batteries

of different sizes or from different manufactur-

ers in this product. DO NOT USE NONRE-

CHARGEABLE BATTERIES.

3. Do not dispose of the batteries in a fire; the

cells may explode. Do not expose batteries to

water. Check with local codes for special dis-

posal instructions.

4. Do not open or mutilate the batteries.

Released electrolyte is corrosive and may cause

damage to the eyes or skin. The electrolyte may

be toxic if swallowed.

5. Exercise care in handling the batteries in

order not to short the batteries with conducting

materials such as rings, bracelets, and keys. The

batteries or conducting material may overheat

and cause burns or fire.

6. Charge the batteries provided with, or identi-

fied for use with, this product only in accord-

ance with the instructions and limitations spec-

ified in the user’s manual. Do not attempt to

charge the batteries with any means other than

that specified in the users manual.

7. Periodically clean the charge contacts on

both the charger and handset.

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

Service (Customer Care)

Customer Care Warranty for Cordless Products

To obtain Customer Care Warranty service,

product operation information, or for problem resolution, call:

Toll Free: 1-866 374 3864

9:00 a.m. – 5:00 p.m. Monday-Saturday

System Information

When calling the Customer Care service,

you may be asked to provide your phone's

system information.

During the call, proceed as follows:

§Menu§ ¢s ¢System Info

Operation Hours

Select entry and press §OK§.

The number of hours your system has

been operating.

§Back§ Press display key.

sHS S/W Version

Select entry and press §OK§.

The software version of the handset is dis-

played. Use q to scroll through all of the

information.

§Back§ Press the display key.

sBase S/W Ver.

Select entry and press §OK§.

The software version of the base station is

displayed. Use q to scroll through all of

the information.

§Back§ Press the display key three

times to return to normal tele-

phone mode.

End-user limited Warranty

The Verizon brand and the Verizon trademark

are used under license. This product is covered

by a one year limited warranty. Any repair

replacement or warranty ser-vice, and all ques-

tions about this product should be directed to:

1-866 374 3864.

This limited, non-transferable warranty is pro-

vided to the original buyer/end-consumer

("you") for systems, handsets and accessories

(collectively, "Product") provided by Siemens

Home and Office Communication Devices LLC

("Siemens"). Siemens warrants to you that at

the date of purchase, the product is free of

defects in workmanship and materials and the

software included in the Product will perform in

substantial compliance to its program specifica-

tions.

1. WARRANTY PERIOD

The Product warranty period is one (1) year

from the original date of purchase by you. Proof

of purchase (e.g., sales slip or invoice) must be

provided with any Product returned during the

Warranty Period. Batteries supplied with the

Products are warranted to be free from defects

at the time of purchase only.

2. EXCLUSIVE REMEDY

Siemens' entire liability and your exclusive rem-

edy if the Product is defective in materials or

workmanship during the Warranty Period and is

returned shall be that the Product will be

repaired or replaced as set forth in Section 4

below. Reconditioned replacement compo-

nents, parts or materials may be used in the

replacement or repair. Data in the memory of

the Product may be lost during repair.

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

3. THIS LIMITED WARRANTY DOES NOT

COVER AND IS VOID WITH RESPECT

TO THE FOLLOWING:

– Cosmetic damage, physical damage to the

surface of the Product, including, without

limitation, breakage, cracks, dents,

scratches or adhesive marks on the LCD

screen or outside casing of the Product.

– Products which have been repaired, main-

tained or modified (including the antenna)

by anyone other than Siemens or a Siemens-

approved repair facility, or that have been

improperly installed.

– Cost of installation, removal or reinstalla-

tion.

– "Damage due to any telephone, electronic,

hardware or software program, network,

Internet or computer malfunctions, failures,

or difficulties of any kind, including without

limitation, server failure or incomplete,

incorrect, garbled or delayed computer

transmissions.

– Equipment and components not manufac-

tured, supplied or authorized by Siemens.

– Modification of the Product's components,

or operation of the Product in an unsuitable

environment or in a manner for which it is

not intended, including but not limited to

failures or defects caused by misuse, abuse,

accidents, physical damage, abnormal oper-

ation, improper handling or storage,

neglect, alterations, unauthorized installa-

tion, removal or repairs, failure to follow

instructions, problems caused by the car-

rier's network coverage, exposure to fire,

water or excessive moisture or dampness,

floods, or extreme changes in climate or

temperature, acts of God, riots, acts of ter-

rorism, spills of food or liquids, viruses or

other software flaws introduced into the

Product, or other acts which are not the fault

of Siemens and which the Product is not

specified to tolerate, including damage

caused by mishandling or blown fuses.

– Products which have had warranty stickers,

electronic serial number and/or serial

number label removed, altered, rendered

illegible or fraudulently applied to other

equipment.

– Signal reception problems (unless caused by

defect in material or workmanship in the

Product).

– Products operated outside published maxi-

mum ratings.

– Performance of the Products when used in

combination with other products or equip-

ment not manufactured, supplied or author-

ized by Siemens.

– Consumables (such as batteries and fuses).

– Payments for labor or service to representa-

tives or service centers not authorized to

perform product maintenance by Siemens.

–Loss of data.

– Testing and examination discloses that the

alleged defect or malfunction in the Product

does not exist.

This warranty does not cover customer educa-

tion, instruction, installation or removal, set up

adjustments, problems related to service(s)

provided by a carrier or other service provider,

and/or signal reception problems. Siemens

shall not be responsible for software, firmware,

information, or memory data contained in,

stored on, or integrated with any Products

returned for repair, whether under warranty or

not.

This warranty is valid only in the United States.

USE WITH ACCESSORIES NOT SUPPLIED BY

SIEMENS OR NOT OTHERWISE EXPRESSLY

AUTHORIZED BY SIEMENS MAY VOID

WARRANTY.

4. WARRANTY CLAIM PROCEDURE

All warranty claims must be made by notifying

Siemens prior to the expiration of the Warranty

Period. Siemens' obligation to provide war-

ranty support shall not extend past the end of

the Warranty Period, except that any product

repaired or replaced during the Warranty Period

shall continue to be warranted for the balance

of such Warranty Period or thirty (30) days,

whichever is greater.

Throughout the Warranty Period, Verizon Sup-

port will be available Monday through Saturday

from 9:00 a.m. to 5:00 p.m. Central Time,

excluding National holidays. Support service

will be provided for you by accessing the toll

free customer service number:

1-866 374 3864

5. LIMITATION OF WARRANTY

Siemens makes no warranty or representation

that the software in the Products will meet your

requirements or will work in combination with

any hardware or applications software products

provided by third parties, that the operation of

the software will be uninterrupted or error free,

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

or that all defects in the software products will

be corrected.

6. LIMITATION ON REMEDIES; NO

CONSEQUENTIAL OR OTHER

DAMAGES

Your exclusive remedy for any breach of this

Limited Warranty is as set forth above. Except

for any refund elected by Siemens, YOU ARE

NOT ENTITLED TO ANY DAMAGES, INCLUD-

ING BUT NOT LIMITED TO CONSEQUENTIAL

DAMAGES, if the Product does not meet the

Limited Warranty, and, to the maximum extent

allowed by applicable law, even if any remedy

fails of its essential purpose. The terms below

("Exclusion of Incidental, Consequential and

Certain Other Damages") are also incorporated

into this Limited Warranty. Some states/jurisdic-

tions do not allow the exclusion or limitation of

incidental or consequential damages, so the

above limitation or exclusion may not apply to

you. This Limited Warranty gives you specific

legal rights. You may have others which vary

from state/jurisdiction to state/jurisdiction.

7. DISCLAIMER OF WARRANTIES

SIEMENS AND ITS SUPPLIERS PROVIDE THE

PRODUCT AND SUPPORT SERVICES (IF ANY) AS

IS AND WITH ALL FAULTS. THE LIMITED WAR-

RANTY IS IN LIEU OF ANY OTHER EXPRESS WAR-

RANTIES (IF ANY) CREATED BY ANY DOCUMEN-

TATION OR PACKAGING EXCEPT FOR THE LIM-

ITED WARRANTY, AND TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW IS IN

LIEU OF ANY IMPLIED OR STATUTORY WARRAN-

TIES, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, OF

ACCURACY OR COMPLETENESS OR RESPONSES,

OF RESULTS, OF WORKMANLIKE EFFORT, OF

LACK OF VIRUSES AND OF LACK OF NEGLI-

GENCE, ALL WITH REGARD TO THE PRODUCT,

AND THE PROVISION OF OR FAILURE TO PRO-

VIDE SUPPORT SERVICES. ALSO, THERE IS NO

WARRANTY OR CONDITION OF TITLE, QUIET

ENJOYMENT, QUIET POSSESSION, OR CORRE-

SPONDENCE TO DESCRIPTION OR NON-

INFRINGEMENT WITH REGARD TO THE PROD-

UCT. Some states or provinces do not allow lim-

itations on how long an implied warranty lasts

or the exclusion or limitation of incidental or

consequential damages, so the above exclu-

sions or limitations may not apply to you

(applies only in the U.S. and Canada). If an

implied warranty or condition is created by your

state/province and federal or state/provincial

law prohibits disclaimer of it, you also have an

implied warranty or condition, BUT ONLY AS TO

DEFECTS DISCOVERED DURING THE PERIOD OF

THIS LIMITED WARRANTY (ONE YEAR). AS TO

ANY DEFECTS DISCOVERED AFTER THE ONE

YEAR PERIOD, THERE IS NO WARRANTY OR CON-

DITION OF ANY KIND. This limited warranty

gives you specific legal rights, and you may also

have other rights which vary from state to state

or from province to province (applies only in the

U.S. and Canada). In no event shall Siemens' lia-

bility exceed the cost of repairing or replacing

defective Products as provided herein, and any

such liabilities will terminate upon expiration of

the warranty period.

Any supplements or updates to the Product or

the software in the Product, including without

limitation, any (if any) software fixes or

upgrades or bug fixes provided to you after the

expiration of the one year Limited Warranty

period are not covered by any warranty or con-

dition, express, implied or statutory.

8. EXCLUSION OF INCIDENTAL,

CONSEQUENTIAL AND CERTAIN

OTHER DAMAGES

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, IN NO EVENT SHALL SIE-

MENS, SELLER OR THEIR SUPPLIERS BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES WHATSOEVER

(INCLUDING, BUT NOT LIMITED TO, DAMAGES

FOR LOSS OF PROFITS OR CONFIDENTIAL OR

OTHER INFORMATION, FOR BUSINESS INTER-

RUPTION, FOR PERSONAL INJURY, FOR LOSS OF

PRIVACY, FOR FAILURE TO MEET ANY DUTY

INCLUDING OF GOOD FAITH OR OF REASON-

ABLE CARE, FOR NEGLIGENCE, AND FOR ANY

OTHER PECUNIARY OR OTHER LOSS WHATSO-

EVER) ARISING OUT OF OR IN ANY WAY

RELATED TO THE USE OF OR INABILITY TO USE

THE PRODUCT, THE PROVISION OF OR FAILURE

TO PROVIDE SUPPORT SERVICES, OR OTHER-

WISE UNDER OR IN CONNECTION WITH ANY

PROVISION OF THIS LIMITED WARRANTY, EVEN

IN THE EVENT OF THE FAULT, TORT (INCLUDING

NEGLIGENCE), STRICT LIABILITY, BREACH OF

CONTRACT OR BREACH OF WARRANTY OF SIE-

MENS OR SELLER OR ANY SUPPLIER, AND EVEN

IF SIEMENS OR SELLER OR ANY SUPPLIER HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. REPAIR OR REPLACEMENT, AS PRO-

VIDED UNDER THE WARRANTY, IS YOUR SOLE

AND EXCLUSIVE REMEDY FOR BREACH OF THE

LIMITED WARRANTY.

Appendix

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / appendix.fm / 12.3.08

9. LIMITATION OF LIABILITY AND

REMEDIES

NOTWITHSTANDING ANY DAMAGES THAT YOU

MIGHT INCUR FOR ANY REASON WHATSOEVER

(INCLUDING, WITHOUT LIMITATION, ALL DAM-

AGES REFERENCED ABOVE AND ALL DIRECT OR

GENERAL DAMAGES), THE ENTIRE LIABILITY OF

SIEMENS, SELLER AND ANY OF THEIR SUPPLIERS

UNDER ANY PROVISION OF THIS LIMITED WAR-

RANTY AND YOUR EXCLUSIVE REMEDY FOR ALL

OF THE FOREGOING (EXCEPT FOR ANY REMEDY

OF REPAIR OR REPLACEMENT ELECTED BY SIE-

MENS OR SELLER OR SUPPLIER WITH RESPECT

TO ANY BREACH OF THE LIMITED WARRANTY)

SHALL BE LIMITED TO THE GREATER OF THE

AMOUNT ACTUALLY PAID BY YOU FOR THE

PRODUCT OR FIVE DOLLARS ($5.00 USD). THE

FOREGOING LIMITATIONS, EXCLUSIONS AND

DISCLAIMERS SHALL APPLY TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, EVEN

IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.

10.GOVERNING LAW

This limited warranty will be governed by the

laws of Texas, and excluding the United Nations

Convention on Contracts for the International

Sale of Goods.

If you want to learn more about Verizon Service

or for Support on your Verizon phone, visit our

web site at http://www.verizon.com or please

call 1-866 374 3864.

Issued by Siemens Cordless Products

Siemens is a registered trademark of Siemens

Home and Office Communication Devices

GmbH & Co. KG.

Siemens Cordless Products is a division of

Siemens Home and Office Communication

Devices GmbH & Co. KG.

Product attributes subject to change.

Siemens reserves the right, to make changes

without notice in equipment design and/or

components.

Part Number:A31008-M1908-R301-1-6019

Index

V100_V100AM / USA EN / A31008-M1908-R301-1-6019 / V100_kombi_SIX.fm / 12.3.08

Index

Symbols

"External" (calls list). . . . . . . . . . . . . . 14

"Withheld" (calls list) . . . . . . . . . . . . . 14

Access protection . . . . . . . . . . . . . . . 26

Activating

answer machine. . . . . . . . . . . . . . . 16

answer machine

(remote operation) . . . . . . . . . 20

auto answer. . . . . . . . . . . . . . . . . . 24

handset . . . . . . . . . . . . . . . . . . . . . 11

internal conference call . . . . . . . . . 23

keypad lock . . . . . . . . . . . . . . . . . . 11

key-touch tone. . . . . . . . . . . . . . . . 25

Adjusting loudspeaker volume . . . . . . 25

Announcement (answer

machine) . . . . . . . . . . . . . . . . . . 17

Announcement mode (answer

machine) . . . . . . . . . . . . . . . 16, 17

Answer machine . . . . . . . . . . . . . . . . 16

activating/deactivating . . . . . . . . . . 16

deleting messages . . . . . . . . . . . . . 18

playing back messages . . . . . . . 17, 18

recording a personal announcement/

announce only . . . . . . . . . 16, 20

remote operation . . . . . . . . . . . . . . 20

Gigaset Communications V100AM 1.9GHZ CORDLESS PHONE User Manual V100 kombi

Gigaset Communications GmbH 1.9GHZ CORDLESS PHONE V100 kombi

USERS MANUAL

Navigation menu

Namespaces

Views

Navigation