Gigaset Communications V310AM UPCS Base Station User Manual Master BA SL565

Gigaset Communications GmbH UPCS Base Station Master BA SL565

User manual

1The handset at a glanceC385 V310AM / USA / A31008-M2026-R351-1-6019 / overview.fm / 04.11.2008Version 4, 29.10.2007The handset at a glance 1Display in idle status (example)2Charge status of the batteries (¢page 13)3Display keys (¢page 20)4Message key (¢page 30)Access to calls and message lists;Flashes: new message or new call5End Call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 6Pound key Keypad lock on/off (press and hold in idle status);toggle between uppercase/lowercase and digits7Internal key Make an internal call (¢page 40)8Microphone 9 Flash key (¢page 45)- Recall (flash)- Insert a dialing pause (press and hold)10 Asterisk key Ringer melodies on/off (press and hold);With an existing connection: Switch between pulse dialing/touch-tone dialing (press briefly)11 Key 1 (¢page 37)Dial answer machine/network mailbox (press and hold)12 Connection socket for headset (¢page 18)13 Talk key Answer a call, open last number redial list (press briefly), start dialing (press and hold) 14 Handsfree key Switch between earpiece and handsfree mode;Lights up: Handsfree activatedFlashes: Incoming call15 Control key (¢page 20)16 Answer machine iconAnswer machine switched on;Flashes: Answer machine is recording a message or is being operated by another internal party17 Signal strength (¢page 13)23546715141191081131217 Ð×V10.01.08 07:15ÞMenu16
2The base station at a glanceC385 V310AM / USA / A31008-M2026-R351-1-6019 / overview.fm / 04.11.2008Version 4, 29.10.2007The base station at a glance You can use the keys on the base station to register handsets to the base station, search for handsets (paging) ¢page 39 and operate the integrated answer machine.Verizon 310AM base station1Registration/Paging key: Press briefly: Search for handsets (paging), ¢page 39.Press and hold: Register handsets and DECT devices, ¢page 39.2On/Off key: Activate/deactivate answer ma-chine. LED lights up: Answer machine is activated. LED flashes: The answer machine is record-ing a new message.During message playback: 3Play/Stop key:Play back new messages from answer machine or cancel the playback (press briefly). Play back new and old messages (press and hold).LED flashes: At least one new message is present.LED flickers: Memory is full.4 Skip to next message (press once) or mes-sage after next (press twice).5 Skip back to beginning of the message (press once) or to the previous message (press twice).6 Delete current message. 7 Adjust volume during message playback: ð= quieter; ñ = louder. While an external call is being signaled: Adjust ringer melody volume.Please note:uIf the answer machine is being oper-ated from a handset, or if it is recording a message, you cannot operate it from the base station.uIf the LED flashes although the answer machine is switched off, it means there is still at least one new message that has not been played back yet. 6723514
3ContentsC385 V310AM / USA / A31008-M2026-R351-1-6019 / C385IVZ.fm / 04.11.2008Version 4, 29.10.2007ContentsThe handset at a glance   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1The base station at a glance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   2Safety precautions    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   6First steps   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7Check the package contents  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7Setting up the base station and charging cradle (if included)  . . . . . . . . . . .  10Connecting the base station  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10Connecting the charging cradle (if included)    . . . . . . . . . . . . . . . . . . . . . . .  11Setting up the handset for use   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12Area codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17Connecting the headset   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18What would you like to do next?  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19Using the phone  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   20Control key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20Display keys  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20Keys on the keypad  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21Correcting incorrect entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21Menu guidance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21Activating/deactivating the handset  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22Activating/deactivating the keypad lock  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22Illustration of operating steps in the user guide . . . . . . . . . . . . . . . . . . . . . .  23Menu tree  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   24Making calls   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   26Making an external call  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26Ending a call   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26Answering a call   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26Caller ID  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26Handsfree talking   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27Muting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27CID 2.5 services (network services)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27Using the directory and lists  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   28Directory   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28Last number redial list  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30Opening lists with the Message key  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30Making cost-effective calls  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   32Displaying the call duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
4ContentsC385 V310AM / USA / A31008-M2026-R351-1-6019 / C385IVZ.fm / 04.11.2008Version 4, 29.10.2007Operating the answer machine of theVerizon 310AM base station  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   33Operation using the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33Activating/deactivating call screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35Setting up the answer machine   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35Resetting fast access for the answer machine using Key 1 . . . . . . . . . . . . . .  35Operating when on the move (remote operation) . . . . . . . . . . . . . . . . . . . .  36Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   37Configuring fast access for the network mailbox  . . . . . . . . . . . . . . . . . . . . .  37Viewing the network mailbox report   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  37ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   38Setting the alarm clock  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   38Using several handsets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   39Registering handsets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39De-registering handsets   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39Locating a handset ("paging") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39Making internal calls  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40Listening in to an external call (conference) . . . . . . . . . . . . . . . . . . . . . . . . .  40Handset settings   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   41Changing date and time  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41Setting the display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41Activating/deactivating auto answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41Changing the handsfree/earpiece volume   . . . . . . . . . . . . . . . . . . . . . . . . . .  41Changing ringer melodies  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42Activating/deactivating muting for the first ringer tone . . . . . . . . . . . . . . . .  42Advisory tones  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  43Restoring the handset to the factory settings . . . . . . . . . . . . . . . . . . . . . . . .  43Base station settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   43Protecting against unauthorized access  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  43Changing ringer melodies  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44Repeater support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44Restoring the base station to the factory settings   . . . . . . . . . . . . . . . . . . . .  44Connecting the phone to a PABX  . . . . . . . . . . . . . . . . . . . . . . . . .   45Dialing modes and recall  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  45Setting pauses  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  45Switching temporarily to touch-tone dialing (DTMF)  . . . . . . . . . . . . . . . . . .  45Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   46
5ContentsC385 V310AM / USA / A31008-M2026-R351-1-6019 / C385IVZ.fm / 04.11.2008Version 4, 29.10.2007Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   47Care  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47Contact with liquid   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  47Writing and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  48FCC / ACTA Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  49Safety precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  50Service (Customer Care)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52End-user limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   56Mounting the base station on the wall  . . . . . . . . . . . . . . . . . . . .   57Mounting the charging cradle on the wall  . . . . . . . . . . . . . . . . .   57Index  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
6Safety precautionsC385 V310AM / USA / A31008-M2026-R351-1-6019 / security.fm / 04.11.2008Version 4, 29.10.2007Safety precautions * WarningRead the safety precautions and the user guide before use.Explain them and the potential hazards associated with using the telephone to your children.*also see page50Only use the power adapter supplied, as indicated on the underside of the base station or charging cradle..Only insert approved rechargeable batteries of the same type. Never use ordinary (non-rechargeable) batteries as they may pose a health hazard or cause injury. Do not charge the handset in charging cradle or base station while the headset is connected.The operation of medical appliances may be affected. Be aware of the technical conditions in your particular environment, such as a doctor's office.Notice to Hearing Aid Wearers:This phone system is compatible with inductively coupled hearing aids.Do not install the base station or charging cradle in bathrooms or shower rooms. The base station and charging cradle are not splash proof (¢page 47).Do not use your phone in environments with a potential explosion hazard (e.g. paint shops).If you give your telephone to someone else, make sure you include the user guide.Please remove faulty base stations from use or have them repaired by Verizon Service, as they could interfere with other wireless services.Dispose of batteries and the phone carefully. Do not pollute the environment. Emergency numbers cannot be dialed if the keypad lock is activated! !$ƒ
7First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007First stepsCheck the package contentsVerizon 310AM-11 One Verizon 310AM-1 base station2 One power adapter for the base station3 One handset4 One phone cord5 Two batteries6 One battery cover7 One belt clips8 One user guide21567348
8First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Verizon 310AM-21 One Verizon 310AM-2 base station2 One power adapter for the base station3 One charging cradle4 One power adapter for charging cradles5 Two handsets6 One phone cord7 Four batteries8 Two battery covers9 Two belt clips10 One user guide21567981034
9First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Verizon 310AM-31 One Verizon 310AM-3 base station2 One power adapter for the base station3 Two charging cradles4 Two power adapters for charging cradles5 Three handsets6 One phone cord7 Six batteries8 Three battery covers9 Three belt clips10 One user guide2156798103 4
10First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Setting up the base station and charging cradle (if included)The base station and charging cradle are designed for use in enclosed dry rooms within a temperature range of +41°F to +113°F. ¤Set up the base station and charging cradles at a central location, on a flat, nonslip surface in your house or apartment.The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on today's furniture, the occurrence of marks on the surfaces cannot be completely ruled out.For instructions on how to mount the base station and charging cradle on a wall, ¢page 57.Please note: uNever expose the telephone to heat sources, direct sunlight, or other elec-trical devices.uProtect your telephone from moisture, dust, and corrosive liquids and vapors.Connecting the base station¤First connect the power adapter 1.¤Then connect the telephone jack 2, and insert the cables into the cableducts.Please note: uThe power adapter must always be con-nected, as the phone will not operate with-out a power connection.uOnly use the power adapter and phone cord supplied. Pin connections on telephone cables can vary (pin connections ¢page 48).Please noteKeep in mind the range of the base station.It is up to 984 feet in unobstructed outdoor areas and up to 165 feet inside buildings. The range is reduced when Eco Mode (¢page 38) is activated.111112
11First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Connecting the charging cradle (if included) ¤Plug the power adapter into the plug socket 2.¤Connect the flat plug of the power adapter 1.If you need to disconnect the plug from the charging cradle, press the release button 1 and disconnect the plug 2. 1212
12First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Setting up the handset for useThe display is protected by a plastic film. Please remove the protective film!Inserting the batteries and closing the battery coverWarningUse only rechargeable UL approved AAA batteries. Never use a conventional (non-rechargeable) battery or other battery types, as this could result in sig-nificant health risks and personal injury. For example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.¤Insert the batteries in the cor-rect orientation.The polarity is indicated in/on the battery compartment.¤First insert the battery cover at the top a.¤Then press the cover b until it clicks into place.If you need to open the battery cover, for example, to replace the batteries, place your fingertip into the cavity on the casing and pull the battery cover upwards.ab
13First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Attaching the belt clipThe handset has notches on each side to accommodate the belt clip.¤Press the belt clip onto the back of the handset so that the notches on the belt clip click into position. Placing the handset into the base station and registeringIf you purchased a model with multiple handsets, repeat the registration process for each handset. Handsets are assigned the lowest available internal number (1–4). If more than one handset is registered to the base station, the internal handset number appears on the display (e.g. INT 2). If the internal num-bers 1–4 are already assigned to other devices, the number 4 will be overwrit-ten.Handset is registeringëÐVÞMenuBefore you can use the phone, you must first register the handset to the base station.¤Place the handset with the display facing up in the base station. The handset registers automatically. Registration can take up to 5 minutes. Do not remove the handset from the base station during this time.The following is displayed after successful registration:uThe strength of the reception signal between base station and handset:– Good to poor:  ÐiÑÒ–No reception:  | flashesuBattery charge status:–= e V U(flat to full) –=flashes: batteries almost flat–e V Uflashes: charging proce-dure Place handset on baseMenu
14First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007To charge the batteries, leave the handset in the charging cradle. Should you have any questions and problems ¢page 46.Initial charging and discharging of batteriesThe correct charge level can only be displayed if the batteries are first fully charged and discharged.Please noteuEach key press interrupts the automatic registration.uIf automatic registration does not work, you must register the handset manually (¢page 39).Please noteOnly place the handset in the base station or charging cradle that is intended for it.Please noteuAfter the first battery charge and discharge, you may replace your hand-set in its base station or charging cradle after every call. uAlways repeat the charging and discharging procedure if you remove the batteries from the handset and reinsert them.uThe batteries may warm up during charging. This is not dangerous.uAfter a while, the charge capacity of the batteries will decrease for technical reasons.¤Place the handset in the base station or charging cradle for eleven hours.¤Then remove the handset from the base station or charging cradle, and do not replace it until the batteries are completely discharged.11 h
15First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Setting the date and timeSet the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used.¤Press the key below §Menu§ on the display screen to open the main menu. ¤Press the bottom of the Control key ...... until the Settings menu item appears. ÞMenuSettingsÇUOK¤Press the key below §OK§ on the display screen to confirm your selection. Date/TimeÇUOKThe Date/Time menu item appears on the display.¤Press the key below §OK§ on the display screen to open the input field.
16First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Enter Date:[10.01.2008]ÇTOK¤Enter the hours and minutes as four digits using the handset (e.g.      QM5for 07:15 AM).If necessary, use the Control key to toggle between fields.¤The active line is marked [...].Enter month, day and year as an 8-digit number using the handset (e.g.  QQ  2QQNfor 10/1/08).If you want to correct an entry, press the top or bottom of the Control key to toggle between fields.¤Press the key below §OK§ on the display screen to confirm your selection. Enter time:[07:15]ÇTOKÇTOK¤Press and hold the End Call key a to return to the idle status. The display shows Saved. You will hear a confirmation tone.¤Press the key below §OK§ on the display screen to confirm your selection. Saved
17First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Area codesIn order to call back a caller using the incoming caller ID list (¢page 22), your phone's area code ("local area code") must be stored. If your phone is in a "mul-tiple area code" area, the extra codes for this area must also be stored.Local Area Code§Menu§ ¢Settings ¢BaseLocal Area CodeSelect and press §OK§.~Enter local area code.§OK§ Press the display key. a Press and hold (idle status).Extra Codes§Menu§ ¢Settings  ¢BaseExtra CodesSelect and press §OK§.~Enter extra code.§OK§ Press the display key. a Press and hold (idle status).Repeat the above steps until all extra codes for your area have been entered. A maximum of 5 extra codes can be stored.Display in idle statusOnce the phone is registered and the time set, the idle display is shown, as in this exam-ple. If the answer machine is activated, the answer machine icon × will also be dis-played in the header.Your answer machine is set with a prere-corded announcement.Your phone is now ready to use. ÐV10.01.08 07:15ÞMenu
18First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Connecting the headsetYou can connect various headset types (with 2.5-mm jack connector), including HAMA Plantronics M40, MX100, and MX150.A compatibility list of tested headsets can be found on the Internet at:www.plantronics.com/productfinder.Please call the Verizon Service number 1-866 374 3864 or contact us at http://www.verizon.com for information.WarningDo not charge the handset in the charging cradle or base station while the headset is connected.
www.verizon.com">
19First stepsC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007What would you like to do next?Now that you have successfully started your Verizon 310AM, you will probably want to adapt it to your personal requirements. Use the following guide to quickly locate the most important topics.If you are unfamiliar with menu-driven devices, such as other Verizon tele-phones, you should first read the section titled "Using the phone" ¢page 20.If you have any questions about using your phone, please read the tips on troubleshooting (¢page 46) or contact our Customer Care team (¢page 52).Information on ... ... is located here.Setting the ringer melody and volume page 42Setting the handset volume page 41Recording a personal message for the answer machine page 33Setting Eco Mode page 38Operating the telephone on a PABX page 45Registering existing handsets to a base station page 39Transferring directory entries from existing handsets to the new handset(s) page 29ggggggg
20Using the phoneC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Using the phoneControl keyIn the following description, the side of the Control key you need to press for each operation is indicated accordingly, (e.g. t for "press the top of the Control key." The Control key has a number of different functions:When the handset is in idle statuss  Open the directorytDisplay the menu for setting the handset's call volume (¢page 41), ringer melodies (¢page 42), and advisory tones (¢page 43).In the main menu, in submenus and listst/ s  Scroll up/down line by line.In input fieldsUse the Control key to move the cursor to the left t or right s. During an external calls  Open the directorytAdjust the loudspeaker volume for earpiece and handsfree mode Display keysThe function of the display keys changes depending on the particular operating situation. Example:Important display keys:Open a context-dependent menu.Confirm selection.WDelete key: Deletes one character at a time from right to left.Go back one menu level or cancel operation.Open the last number redial list.ÇUOK Current display key functions are shown in the bottom display line.Display keysMenuOKÇÞ
21Using the phoneC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Keys on the keypadc/ Q/ *, etc. Press the matching key on the handset. ~Enter digits or letters. Correcting incorrect entriesYou can correct incorrect characters in the text by navigating to the incorrect entry using the Control key. You can then:uPress X to delete the character to the left of the cursor uInsert characters to the left of the cursoruOverwrite the character (flashing) when entering the time, date, and so onMenu guidanceYour phone's functions are accessed using a menu that has a number of levels. Main menu (first menu level) ¤When the handset is in idle status, press §Menu§ to open the main menu.The main menu functions are shown on the display as a list with a name and icon. To access a function, meaning to open the corresponding submenu (next menu level):¤Navigate to the function using the Control key q. Press the display key §OK§. Submenus The functions in the submenus are displayed as lists. To access a function:¤Scroll to the function with the Control key q and press §OK§. Or:¤Enter the corresponding digit combination (¢page 24).Briefly press the End Call key a once to return to the previous menu level/cancel the operation.Reverting to idle statusYou can revert to idle status from anywhere in the menu as follows:¤Press and hold the End Call key a.Or:¤Do not press any key: After two minutes, the display will automatically revert to idle status.Any settings you have not confirmed by pressing §OK§ will be discarded.An example of the display in idle status is shown on ¢page 17.
22Using the phoneC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Activating/deactivating the handsetaWith the phone in idle status, press and hold the End Call key (con-firmation tone) to switch off the handset. Press and hold the End Call key again to switch the handset on.Activating/deactivating the keypad lockThe keypad lock prevents any inadvertent use of the phone.#Press and hold the pound key to activate or deactivate the keypad lock. You will hear the confirmation tone. When the keypad lock is activated, you will see the Ø icon on the display and a message when you press a key.The keypad lock is deactivated automatically if someone calls you. It is reacti-vated when the call is finished.
23Using the phoneC385 V310AM / USA / A31008-M2026-R351-1-6019 / starting.fm / 04.11.2008Version 4, 29.10.2007Illustration of operating steps in the user guideThe operating steps are shown in abbreviated form.Example:The illustration:§Menu§ ¢Settings ¢Handset ¢Auto Answer (‰=on)means:¤Press the display key §Menu§ to open the main menu. ¤Press the bottom of the Control key s until the Settings menu item appears on the display. ÞMenu¤Press the display key §OK§ to confirm your selection. Auto AnswerÇUOK‰The Auto Answer menu item appears on the display.¤Press the display key §OK§ to activate/deactivate the function (‰=on). HandsetÇUOKSettingsÇUOK¤Press the bottom of the Control key s until the Handset menu item appears on the display. ¤Press the display key §OK§ to confirm your selection.
24Menu treeC385 V310AM / USA / A31008-M2026-R351-1-6019 / menuetree.fm / 04.11.2008Version 4, 29.10.2007Menu treeInstead of scrolling to locate a menu function, you can select a function more quickly by opening the menu and keying in a digit combination (or shortcut).Example: §Menu§ M22 for "Set ringer melody volume."With the telephone in idle status, press §Menu§ (open main menu):4ì Alarm Clock4-1 Activation ¢page 384-2 Wake up time ¢page 385þ Voice Mail5-1 Set Key 1 5-1-1 Network Mailbox ¢page 375-1-2 Answering  Machine ¢page 375-2 Answering  Machine ¢page 335-3 Call Screening 5-3-1 Handset ¢page 355-3-2 Base ¢page 355-4 Announcements 5-4-1 Record Announcement ¢page 335-4-2 Play Announcement ¢page 335-4-3 Delete Announcement ¢page 335-5 Message Length 5-5-1 Unlimited ¢page 355-5-2 1 Minute5-5-3 2 Minutes5-5-4 3 Minutes5-6 Ring Delay 5-6-1 Immediately ¢page 355-6-2 10 sec5-6-3 18 sec5-6-4 30 sec5-6-5 Auto
25Menu treeC385 V310AM / USA / A31008-M2026-R351-1-6019 / menuetree.fm / 04.11.2008Version 4, 29.10.20077 m Settings7-1 Date/Time ¢page 157-2 Audio Settings 7-2-1 Call Volume ¢page 417-2-2 Ringer Volume ¢page 427-2-3 Ringer Melody ¢page 427-2-4 Advisory Tones ¢page 437-2-5 Battery Low ¢page 437-3 Handset 7-3-1 Display ¢page 417-3-2 Language ¢page 417-3-3 Auto Answer ¢page 417-3-4 Register Handset ¢page 397-3-5 Reset Handset ¢page 437-4 Base 7-4-1 Audio Settings (Verizon 310AM base station only)¢page 447-4-2 Calls List Type ¢page 317-4-3 System PIN  ¢page 437-4-4 Base Reset  ¢page 447-4-5 Additional Features 7-4-5-1 Repeater Mode ¢page 447-4-5-3 Eco Mode ¢page 387-4-6 Listening in ¢page 40
26Making callsC385 V310AM / USA / A31008-M2026-R351-1-6019 / telefony.fm / 04.11.2008Version 4, 29.10.2007Making callsMaking an external call External calls are calls using the public tel-ephone network.~c Enter the number and press the Talk key. Or:c~ Press and hold the Talk key c, and then enter the number. You can cancel the dialing operation with the End Call key a.You are shown the duration of the call while the call is in progress.Ending a callaPress the End Call key.Answering a callThe handset indicates an incoming call in three ways: by ringing, by a display on the screen, and by the flashing Handsfree key d. You can answer the call by:¤Pressing the Talk key c.¤Pressing the Handsfree key d. If the handset is in the charging cradle and the Auto Answer function is activated (¢page 41), the handset automatically answers the call when you remove it from the charging cradle. To deactivate the ringer melody, press the §Menu§ display key and select Silent. You can take the call as long as it is displayed on the screen.Caller IDCaller ID (CID) and Caller Name ID (CNID) are optional subscription services pro-vided by your telephone service provider. These features supply incoming caller identification information that will be dis-played on your handset.Call display with Caller ID/ NameIf the caller's number is saved in your directory, the caller's name will also be displayed. 1 Ringer melody icon 2 Number or name of callerThe following is displayed in place of the number:uExternal Call, if no number is transmit-ted.uWithheld, if the caller has withheld caller ID.uUnavailable, if the caller has not arranged caller ID.Please noteuDialing with the directory (¢page 28), calls list (¢page 30) and last number redial list (¢page 30) saves you from repeatedly typing numbers. uYou can assign a number from the directory as a shortcut to the selected key (¢page 29). Å1234567Menu12
27Making callsC385 V310AM / USA / A31008-M2026-R351-1-6019 / telefony.fm / 04.11.2008Version 4, 29.10.2007Display with CNIPIf you have CNIP, then the name (town/city) that is registered with your network provider for the caller's number will also be displayed. If the number of the caller is stored in your directory, the CNIP display is replaced by the corresponding directory entry.1 Caller's number 2Name and townThe display shows:uWithheld, if the caller has withheld caller ID.uUnavailable, if the caller has not arranged caller ID. Handsfree talkingIn handsfree mode, instead of holding the handset to your ear, you can place it, for example, on a table in front of you. This allows others to participate in the call.Activating/deactivating handsfree modeActivating while dialing ~d Enter the number and press the Handsfree key.¤You should inform your caller before you use the handsfree function so that the caller knows someone else is listen-ing. Switching between earpiece and handsfree modedPress the Handsfree key.During a call and when listening to the answer machine, activate or deactivate handsfree mode.If you wish to place the handset in the charging cradle during a call:¤Press and hold the Handsfree key d while placing the handset in the base station. If the Handsfree key d does not light up, press the key again.For instructions on how to adjust the loud-speaker volume, ¢page 41. MutingYou can deactivate the microphone in your handset during an external call. §Mute§ Press the display key to mute the handset.§On§ Press the display key to switch the microphone back on. CID 2.5 services (network services)If CID is activated and a waiting call is dis-played, 4 different CID 2.5 services (net-work services) are selected.During a call: §Options§ Press the display keySelect with q:TAKE MSGThe waiting caller is forwarded to the central office mailbox.HOLD MSGThe waiting caller is put on hold and hears a message to this effect from the central office.CALL BACKThe waiting caller is prompted by the central office to call again at a later time.ADD 2NDThe central office is prompted to initi-ate a conference call.1234567Anna Fielding,Berlin, GermanyMenu12Note:When the handset is muted and ADD 2ND selected, the microphone will be automatically reactivated.
28Using the directory and listsC385 V310AM / USA / A31008-M2026-R351-1-6019 / direct_charges.fm / 04.11.2008Version 4, 29.10.2007Using the directory and listsThe options are: uDirectoryuLast number redial list uCall history uAnswer machine listYou can save up to 150 entries in the direc-tory.You can create a personalized directory for your particular handset. And you can also send the list or individual entries to other handsets (¢page 29).DirectoryIn the directory, you can save numbers and corresponding names.¤With the handset in idle status, open the directory by pressing the s key. Length of entriesNumber:  max. 32 digits Name:  max. 16 characters Saving the first number in the directorys ¢Dir. empty  New entry?~  Enter the number and press §OK§.~  Enter the name and press §OK§.Storing a number in the directorys ¢§Menu§ ¢New Entry~  Enter the number and press §OK§.~  Enter the name and press §OK§.Order of directory entries Directory entries are usually sorted in alphabetical order. Spaces and digits take first priority. The sort order is as follows:1. Space2. Digits (0–9)3. Letters (alphabetical)4. Other charactersTo get around the alphabetical ordering of the entries, insert a space or a digit in front of the name. These entries will then move to the beginning of the directory. Selecting a directory entrys Open the directory You have the following options:uUse q to scroll to the entry until the desired name is selected. uEnter the first character of the name, or scroll to the entry using s, if necessary. Dialing with the directorys ¢q(Select entry) cPress the Talk key. The number is dialed. Managing directory entriess ¢q(Select entry) Editing entries §Menu§ ¢Edit Entry~  Edit the number, if necessary, and press §OK§.~  Edit the name, if necessary, and press §OK§.Please noteYou can assign a number from the directory as a shortcut to the selected key ¢page 29.
29Using the directory and listsC385 V310AM / USA / A31008-M2026-R351-1-6019 / direct_charges.fm / 04.11.2008Version 4, 29.10.2007Using other functions §Menu§ Press the display key.The following functions can be selected with q:Use Number Save or modify a saved number, and then dial with c, or save as a new entry; to do so, press §Menu§ ¢Copy to Directory ¢§OK§ after the number appears on the display.Delete Entry Delete selected entry.Send Entry Send a single entry to a handset (¢page 29).Delete List Delete all directory entries.Send List Send complete list to a handset (¢page 29).Shortcut Assign the current entry as a shortcut to the selected key.Using shortcut keysYou can assign directory entries to the keys 0 and 2–9:s ¢q(select entry) ¢ §Menu§ ¢Shortcut ¢~ (press the key you want to assign the number to)To dial, press and hold the required short-cut key.Sending the directory to another handsetPreconditions:uThe sending and receiving handsets must both be registered to the same base station. uThe other handset and the base station can send and receive directory entries.s ¢q(select entry) ¢§Menu§ (open menu) ¢Send Entry / Send List ~Enter the internal number of the receiving handset and press §OK§. Successful transmission is acknowledged with the message Entry copied. . You can transfer several individual entries one after the other by responding §OK§ to the Next entry? prompt.Please note: uEntries with identical numbers won't be overwritten on the receiving hand-set. uThe transfer will be canceled if the phone rings or if the memory of the receiving handset is full.Copying a displayed number to the directoryYou can copy numbers displayed in a list (e.g. the calls list or redial list) to the direc-tory.If you have CNIP, the first 16 characters of the transmitted name are copied to the Enter name line. A number is displayed: §Menu§ ¢Copy to Directory ¤Complete the entry ¢page 28. Message playback is interrupted during the number transfer from the answer machine list.Using a number from the directory In some operating situations, you can open the directory to copy a number, for example. Your handset need not be in idle status.sOpen the directory.qSelect entry.§OK§ Press the display key.Select function with q.
30Using the directory and listsC385 V310AM / USA / A31008-M2026-R351-1-6019 / direct_charges.fm / 04.11.2008Version 4, 29.10.2007Last number redial listThe last number redial list contains the ten numbers last dialed with the handset (max. 32 numbers). If one of the numbers is in the directory, the corresponding name will be displayed.Manual last number redial cPress the key briefly.sSelect entry. cPress the Talk key again. The number is dialed.Managing entries in the last number redial listcPress the key briefly.sSelect entry.§Menu§ Open menu.The following functions can be selected with q: Use Number (as in the directory, ¢page 29)Copy to directory Copy an entry to the directory (¢page 28).Delete Entry (as in the directory, ¢page 29) Delete List (as in the directory, ¢page 29) Opening lists with the Message key You can use the Message key f to open the following list selection:uAnswer machine list or network mail-box, if your network provider supports this function and the fast access is set for the network mailbox (¢page 37).uCall historyThe Message key f will flash as soon as a new entry is received in a list (switches off when the key is pressed). The message You have new messages appears in the dis-play in idle status.List selectionThe lists displayed after pressing the Mes-sage key f depend on whether there are any new messages.f key does not flash (no new messages): Select a list with q. To open, press §OK§.f key flashes (new messages received): You see all the lists with new messages. If only one list contains new messages, it will open automatically.Call historyPrecondition: Caller ID (CI, ¢page 26)The calls list contains the last 25 numbers, depending on the settingsuAll calls–Answered calls– Unanswered calls– Calls recorded by the answer machineuMissed calls– Unanswered calls– Calls not recorded by the answer machineThe calls list is displayed as follows:1 Number of new entries2 Number of old, read entriesPlease noteIf calls are saved in the network mail-box, you will receive a message if the appropriate settings have been made (see your network provider user guide).Calls List:02+03ÇUOK12
31Using the directory and listsC385 V310AM / USA / A31008-M2026-R351-1-6019 / direct_charges.fm / 04.11.2008Version 4, 29.10.2007Setting the call history type§Menu§ ¢Settings ¢Base ¢Calls List Missed Calls / All CallsSelect and press §OK§ (=on).a Press and hold (idle status). The call history entries are retained when you change the list type.Answer machine listYou can use the answer machine list to lis-ten to the messages that are on the answer machine. The answer machine list is displayed as follows:1 Number of new entries2 Number of old, read entriesOpening calls/answer machine listf ¢Calls List / Answ. Mach. 01+02 The last incoming call is displayed in the calls list.The first new message received is dis-played in the answer machine list. Play-back begins. New messages are placed after old messages after they have been played back.You can scroll through the list with q.List entryExample of a list entry:uStatus of entryIn the calls list New Call: new missed call.Old Call: entry already read.Call recv.: call taken.In the answer machine list Ans Mach: The answer machine took the call. A message was left.New Msg.: New message on the answer machine.Old Msg.: Previously played back message on the answer machine.uEntry numberFor example, 01/02 means the first of two entries.uNumber or name of callerPress the Talk key c to make a return call. You can add the caller's number to the directory (¢page 29). uCall date and time (if set, page 41).You can delete the current entry with §Menu§ ¢Delete Entry.Answer machine listYou can use the answer machine list to listen to the messages that are on the answer machine. Displaying CNIP informationIf you have CNIP, you can display the name and town/city that is registered with your network provider for this number.You have selected a list entry.§Menu§ ¢Show NameIf the name and town/city are not shown, it means that the caller has not requested caller ID or that caller ID has been with-held. Press §OK§ to return to the list.‰Answ. Mach.:01+02ÇUOK12New Call 01/02123456789010.01.08 12:14ÇUMenu
32Making cost-effective callsC385 V310AM / USA / A31008-M2026-R351-1-6019 / direct_charges.fm / 04.11.2008Version 4, 29.10.2007Making cost-effective callsDisplaying the call durationThe duration of a call is displayeduduring the conversationuuntil about three seconds after the call has ended if you do not replace the handset in the base station or charging cradle.Please noteThe actual duration of the call can vary by a few seconds from that shown.
33Operating the answer machine of the Verizon 310AM base stationC385 V310AM / USA / A31008-M2026-R351-1-6019 / answering_m.fm / 04.11.2008Version 4, 29.10.2007Operating the answer machine of theVerizon 310AM base stationYou can operate the answer machine that is integrated into the base station using the keys on the base station (¢page 2) or the handset, or through remote opera-tion (other landline/mobile phone). You can only record your own announcement messages using the handset.Operation using the handsetThe handset loudspeaker activates auto-matically if you receive an audible prompt or message during operation. You can switch it off with the Handsfree key d.Activating/deactivating the answer machine§Menu§ ¢Voice Mail ¢Answering  Machine (‰=on) When the answer machine is activated, the remaining memory time is announced. The × icon appears on the display. The ö key lights up on the base station.The telephone is supplied with a prere-corded announcement. This prerecorded announcement is used if no personal announcement is available.If the memory is full, a corresponding message will appear on the display, and the answer machine will be automatically deactivated. It automatically reactivates when you delete old messages.Recording your own announcement§Menu§ ¢Voice Mail ¢Announcements ¢Record Announcement§OK§ Press the display key to start the recording.You will hear the ready tone (short tone).¤Now say your announcement (at least 3 seconds).Cancel recording with a or  . Restart the recording with §OK§.§OK§ Press the display key to end the recording.After recording, the announcement is played back for you to check. Please note:uRecording ends automatically when the maximum recording time of 170 seconds has been reached or if there is silence for more than two seconds.uIf you cancel the recording, the prere-corded announcement will be used again.uThe recording is cancelled if the answer machine memory is full.¤If necessary, delete old messages and repeat the recording.Playing back announcements§Menu§ ¢Voice Mail ¢Announcements ¢Play Announcement aPress and hold (idle status). You will hear the prerecorded announce-ment if you have not recorded one of your own. Deleting announcements§Menu§ ¢ Voice Mail ¢Announcements ¢Delete Announcement§OK§ Press the display key to confirm the prompt.  aPress and hold (idle status). The prerecorded announcement is used again after a personal announcement has been deleted. Ç
34Operating the answer machine of the Verizon 310AM base stationC385 V310AM / USA / A31008-M2026-R351-1-6019 / answering_m.fm / 04.11.2008Version 4, 29.10.2007Playing back messagesThe date and time of each message is logged (provided this has been set; see ¢page 15). If caller ID is activated, the caller's number or name is displayed. If the caller's number is saved in the directory, the caller's name is displayed. New messages that have not yet been played back are indicated by a message in the display and by the f key flashing on the handset. The ó key flashes on the base station.To listen to messages:fPress the Message key. Answ. Mach. Select as required and press §OK§.If you have new messages, playback will start with the first new message, other-wise with the first old message. See also answer machine list ¢page 31.Stopping and controlling playback During message playback: 2  Pause playback. Press 2 again to resume.or§Menu§ Stop playback. Press §OK§ to resume.t or Return to the start of the cur-rent message.Press twice to go back to the previous message.s or 3Skip to the next message.Press twice to skip to the mes-sage after next.If playback is interrupted for over a minute, the answer machine returns to idle status.Reading CNIP information of a messageDuring playback or pause:§Menu§ ¢Show Name¤Please also see ¢page 31.Copying the phone number of a message to the directoryDuring playback or pause:§Menu§ ¢Copy to Directory ¤Complete the entry ¢page 28. Deleting messagesYou can either delete all old messages together or individually.Deleting all old messagesDuring playback or pause:§Menu§ ¢Delete all§OK§ Press the display key to con-firm the prompt.Deleting individual old messagesWhile playback is paused:§<C§ Press the display key.Answering up a call from the answer machineYou can answer a call while the answer machine is recording it:c/ dPress the Talk or Handsfree key.Recording stops and you can speak to the caller.If three seconds of the call has already been recorded when you answer it, the call will be displayed as a new message. The f key on the handset flashes.You can answer the call even if it is not sig-naled on the handset.
35Operating the answer machine of the Verizon 310AM base stationC385 V310AM / USA / A31008-M2026-R351-1-6019 / answering_m.fm / 04.11.2008Version 4, 29.10.2007Activating/deactivating call screeningWhile a message is recording, you can screen calls through the loudspeaker of the base station and registered handsets.Permanently activating/deactivating call screening§Menu§ ¢Voice Mail ¢Call Screening ¢Handset / Base (‰=on)  aPress and hold (idle status). Call screening can be simultaneously acti-vated on the base station and handset. Deactivating call screening for the current recordingaPress the End Call key.Setting up the answer machineThe answer machine has already been preconfigured at the factory. Set up indi-vidual settings using the handset.Setting call acceptanceYou can set when you want the answer machine to answer a call.The options are: Immediately, 10 sec, 18 sec or 30 sec and Auto.In Auto mode, the following applies to call acceptance: uIf there are no new messages, the answer machine answers a call after 18 seconds.uIf new messages are present, the answer machine accepts a call after just 10 seconds. §Menu§ ¢Voice Mail ¢Ring Delayq  Select an option Immediately / 10 sec / 18 sec / 30 sec / Auto and press §OK§ (‰=on). aPress and hold (idle status). Setting the recording timeYou can set the maximum recording time for a message. The options are: 1 Minute, 2 Minutes, 3 Minutes or Unlimited.§Menu§ ¢Voice Mail ¢Message Lengthq  Select a recording time and press §OK§ (‰=on). aPress and hold (idle status). Changing the language for voice prompts and prerecorded announcements§Menu§ ¢M4O2 ~Enter a digit for the required language (Q=English, = Spanish) and press §OK§.Resetting fast access for the answer machine using Key 1The integrated answer machine has already been factory preset for fast access. However, if you have set the network mail-box for fast access (¢page 37), you can reset this setting.§Menu§ ¢Voice Mail ¢Set Key 1Answering  MachineSelect and press §OK§.a Press and hold (idle status). When you have selected the answer machine, press and hold Key 1. You will be connected directly.The setting for fast access applies to all registered handsets.
36Operating the answer machine of the Verizon 310AM base stationC385 V310AM / USA / A31008-M2026-R351-1-6019 / answering_m.fm / 04.11.2008Version 4, 29.10.2007Operating when on the move (remote operation)You can check and activate your answer machine from any other telephone (hotel, pay phone, etc.).Preconditions: uYou have set a system PIN other than 0000 (¢page 43).uThe phone you are using for remote operation has touch-tone dialing (DTMF), meaning you hear different tones when you press the keys. Alterna-tively, you can use a code transmitter (available from your cell phone retailer).Calling the answer machine and playing back messages~  Dial your own number. 9~  When you hear your announcement, press 9 and enter the system PIN. You will be informed whether any new messages have been recorded. The mes-sages are then played back. You can now operate the answer machine with the key-pad.The following keys are used: A  To return to the start of the current message.Press twice to go back to the previous message.B  Stop playback. Press again to resume.3  Go to the next message.0  Delete current message.Activating the answer machine¤Phone home and let the phone ring until you hear: "Please enter PIN."~ Enter system PIN.Your answer machine is now activated and tells you how much memory time is left. The messages are then played back.The answer machine cannot be deacti-vated remotely.
37Using the network mailboxC385 V310AM / USA / A31008-M2026-R351-1-6019 / T-NetBox_SAG.fm / 04.11.2008Version 4, 29.10.2007Using the network mailboxThe network mailbox is your network pro-vider's answer machine within the net-work. You cannot use the network mail-box unless you have requested it from your network provider. Configuring fast access for the network mailboxWith fast access, you can directly dial the network mailbox or the integrated answer machine. The integrated answer machine is set for fast access. Instead, you can define fast access for the network mailbox. Ask your network provider about this.Configuring fast access for the network mailbox and entering the network mailbox number§Menu§ ¢Voice Mail ¢Set Key 1Network MailboxSelect and press §OK§ (=on).~Enter the network mailbox number and press §OK§.a Press and hold (idle status). The setting for fast access applies to all handsets.Calling your network mailboxPress and hold. You are con-nected directly to the network mailbox. dPress the Handsfree key d, if required. You will hear the net-work mailbox announcement.Viewing the network mailbox reportWhen a message is recorded, you receive a call from the network mailbox. If you have requested caller ID, the network mailbox number will be displayed. If you take the call, the new messages are played back. If you do not take the call, the net-work mailbox number will be saved in the missed calls list, and the Message key flashes (¢page 30). ‰
38ECO DECTC385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008Version 4, 29.10.2007ECO DECTYou are helping to protect the environ-ment with your Verizon 310AM.Reduced energy consumptionYour telephone has an energy-saving adapter plug and uses less energy.Reduced transmission powerThe transmission power of your telephone is automatically reduced.uThe handset's transmission power is reduced depending on its distance to the base station.uThe transmission power at the base sta-tion is reduced to virtually zero when only one handset is registered and is standing in the base station.You can reduce the transmission power of the handset and base station even further by using Eco Mode:uEco Mode 80% transmission power reduction in standby and talk modes.Activate/deactivate Eco Mode:§Menu§ ¢Settings ¢Base ¢Additional Features ¢Eco Mode§OK§  Press the display key (=on).Status displaysSetting the alarm clockPrecondition: The date and time have already been set (¢page 15).Activating/deactivating the alarm clock§Menu§ ¢ Alarm Clock ¢ Activation (‰=on)After you activate the alarm clock, the menu for setting the wake-up time opens automatically (¢page 38).If the alarm clock is set, the wake-up time appears with the   ¼icon in the display instead of the date.Setting the wake-up time§Menu§ ¢Alarm Clock  ¢Wake up time ~Enter the wake-up time in hours and minutes, then press §OK§.When the alarm clock rings…Alarm repeats after 5 minutes§Snooze§ Press the display key or any key.If you press §Snooze§ three times, the alarm clock switches off for 24 hours.Turning off the alarm clock for 24 hours§Off§ Press the display key.Display iconÐiÑÒ|(flashes)Reception strength:– Good to low– No receptionIcon green Eco Mode enabled‰Please noteuActivating Eco Mode reduces the range of the base station.uEco Mode and repeater support (¢page 44) cancel each other out, meaning you cannot use Eco Mode  when using a repeater.
39Using several handsetsC385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008Version 4, 29.10.2007Using several handsetsRegistering handsetsYou can register up to four handsets to your base station.For how to register your handset automat-ically, ¢page 13. If automatic registration does not work, you must register the handset manually.Manual registration of the handset to Verizon 310AMYou must activate manual registration of the handset to both the handset and the base station. Once it has been registered, the handset returns to idle status. The handset's inter-nal number is shown in the display (e.g. INT 1). If it does not appear, repeat the procedure.On the handset§Menu§ ¢Settings ¢Handset ¢Register Handset~Enter the system PIN of the base station (the default is 0000) and press §OK§. Handset is registering flashes on the dis-play.On the base stationWithin 60 sec., press and hold the Regis-tration/Paging key on the base station (¢page 2) (approx. 3 seconds). Registering other handsetsYou can register other Verizon handsets and handsets for other devices with GAP functionality as follows: On the handset¤Start to register the handset as described in its user guide.On the base stationPress and hold the Registration/Paging key on the base station (¢page 2) (approx. 3 seconds). De-registering handsetsHandsets can only be de-registered by resetting the base station to its default set-tings. This will also reset every other setting ¢page 44.Locating a handset ("paging")You can locate your handset using the base station. ¤Briefly press the Registration/Paging key on the base station (¢page 2).¤All handsets will ring simultaneously ("paging"), even if the ringer melodies are deactivated.Ending paging¤Briefly press the Registration/Paging key on the base station or press the Talk key c on the handset.Please noteEach additional handset must be regis-tered on the base station in order for it to work properly!
40Using several handsetsC385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008Version 4, 29.10.2007Making internal callsInternal calls to other handsets registered with the same base station are free.Calling other handsetskStart internal call. The display shows Enter INT No..~Enter the internal number of the receiving handset and press §OK§. The handset is called. or: §Call all§ Press the display key and §OK§. All handsets are called.Ending a callaPress the End Call key.Transferring a call to another handset/making an internal consultation callYou are talking to an external party and can call an internal party at the same time to forward the call or to consult. ¤Calling internal partiesWhen an internal party answers:¤If necessary, announce the external call. EitheraPress the End Call key. The call is transferred. or: Press the display key. You are reconnected with the external party.When transferring a call, you can also press the End Call key a before the inter-nal party answers. Then, if the internal party does not answer or the line is busy, the call will automatically return to you (the display will show Recall).Answering a waiting callIf you receive an external call during an internal call, you will hear the call waiting tone (short tone). The caller's number or name will appear in the display if caller ID is enabled. a  Press the End Call key to end the internal call.c  Press the Talk key to take the external call.Listening in to an external call (conference)You are conducting an external call. An internal party can listen in on this call and take part in the conversation. A signal tone and Conference Call on the display indicate to all parties the inclusion of a new party in the conversation. Precondition: The Listening in function must be activated. Activating/deactivating listening in§Menu§ ¢Settings ¢Base  ¢Listening in (‰=on)  aPress and hold (idle status). Internal listening inThe line is engaged with an external call. Your screen will display information indi-cating this status. You want to listen in to the external call.c Press and hold the Talk key.You join the call. All parties hear a signal tone. Conference Call appears in the dis-play.Ending listening ina  An internal party presses the End Call key.All parties hear a signal tone.This does not affect the connection between the other internal parties and the external caller.Ç
41Handset settingsC385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008Version 4, 29.10.2007Handset settings Your handset is preconfigured, but you can change the settings to suit your indi-vidual requirements.Changing date and timeTo change the time, open the input field with:§Menu§ ¢Settings ¢Date/TimeEnter Date:Enter the month, day, and year in 8-digit format, for example, QQ 2QQN for 10/01/08.Enter time:Enter hours and minutes as 4 digits, for example,     QM5 for 07:15 AM.§OK§ Press the display keyChanging the display languageYou can view the display texts in different languages.§Menu§ ¢Settings ¢Handset ¢LanguageThe current language is indicated by ‰.qSelect a language and press §OK§.  aPress and hold (idle status). If you accidentally choose a language you do not understand:§Menu§ N32 Press keys in sequence.q  Select the correct language and press §OK§.Setting the displayYou have a choice of four color schemes and several different contrasts. You can also set a screensaver and backlight.§Menu§ ¢Settings ¢Handset ¢DisplayYou have the following options:Screensaver The available settings are No Screen-saver, Globe or Digital Clock.Color Scheme Four color schemes are available. When the backlight is turned off, the display is shown in black and white, regardless of the selected setting.ContrastThere are five available contrast levels.BacklightIn Charger / Out of Charger. Determines whether the backlight stays on perma-nently or is turned off after a certain time (‰= permanently switched on).Activating/deactivating auto answerWhen this function is activated, when a call arrives, you can simply lift the handset out of the base station without having to press the Talk key c.§Menu§ ¢Settings ¢Handset ¢Auto Answer (‰=on) aPress and hold (idle status). Changing the handsfree/earpiece volumeYou can adjust the volume for handsfree talking to one of five settings (1–5, e.g. volume 3 = Š) and the earpiece volume to one of three (1–3, e.g. volume 2 = ‰).Setting the volume during a callThe setting applies to the current mode (earpiece or handsfree).You are conducting an external call. Please noteIf the backlight is turned on outside the charging cradle, the standby time for the handset is considerably reduced!
42Handset settingsC385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008Version 4, 29.10.2007t  Press the Control key.q  Set the volume.The setting will automatically be saved after approx. 3 seconds. If not, press the display key §OK§.Adjusting the volume using the menu§Menu§ ¢Settings ¢Audio Settings ¢Call Volume ¢Earpiece Volume / Handsfree Volumeq  Adjust the volume and press §OK§. aPress and hold (idle status). Changing ringer melodiesuVolume:Five volume levels (1–5; e.g. volume 3 = ˆ) and "crescendo" ring (6; vol-ume increases with each ringer melody = ‡). uMelody:List of preloaded ringer melodies. The first three melodies are the "classic" ringer melodies.You can also set different ringer melodies for the following functions:uExternal Calls: For external callsuInternal Calls: For internal callsuAlarm Clock: For the alarm clockFor how to set the ringer melodies for the base station, ¢page 44.Setting the ringer volumeThe ringer volume is the same for all types of ringer melodies.§Menu§ ¢Settings ¢Audio Settings ¢Ringer VolumeOr in idle status:t Press briefly.Then:q  Adjust the volume and press §OK§. aPress and hold (idle status). Setting the ringer melodySet different ringer melodies for external calls, internal calls, and the alarm clock. §Menu§ ¢Settings ¢Audio Settings ¢Ringer Melody External Calls / Internal Calls / Alarm Clock Select and press §OK§.qSelect melody (‰=on) and press §OK§.aPress and hold (idle status). Activating/deactivating the ringer melodyYou can turn off the ringer melody on your handset before you answer a call or while the phone is in idle status. You can take a call so long as it is displayed on the screen.Deactivating the ringer melody*Press the Asterisk key and hold until the Ú icon appears on the display.Reactivating the ringer melody*Press and hold the Asterisk key in idle status.Activating/deactivating muting for the first ringer tone§Menu§  Press the display key.M4O22 Press keys.Q§OK§ Make the first ring audible.Or: §OK§ Mute the first ring.
43Base station settingsC385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008Version 4, 29.10.2007Advisory tonesYour handset uses "advisory tones" to tell you about different activities and statuses. The following advisory tones can be acti-vated and deactivated independently of each other:uAdvisory tones: –Key click: every key press is con-firmed.–Confirmation tone (rising tone sequence): at the end of an entry/setting, when the handset is placed in the base station and on arrival of a new entry in the answer machine list or the calls list.–Error tone (descending tone sequence): When you make an incorrect entry.–Menu end tone: When scrolling at the end of a menu.uBattery low beep: the battery requires charging.You cannot deactivate the confirmation tone for placing the handset in the base station.Activating/deactivating advisory tones§Menu§ ¢Settings ¢Audio Settings ¢Advisory TonesSelect and press §OK§ (‰=on).Setting the battery low beep§Menu§ ¢Settings ¢Audio Settings ¢Battery LowOn / Off / During CallSelect and press §OK§ (‰=on). The low-battery beep is acti-vated or deactivated or sounds during a call. Restoring the handset to the factory settingsYou can reset any individual settings and changes you have made. This will not affect entries in the directory, calls list, or the handset's registration to the base sta-tion.§Menu§ ¢Settings ¢Handset ¢Reset HandsetConfirm query with §OK§, or reject it with . aPress and hold (idle status).Base station settingsThe base station settings are carried out using a registered handset.Protecting against unauthorized accessProtect the system settings of the base sta-tion with a PIN known only to you. You may have to enter the system PIN into the base station when manually registering a handset.Changing the system PINYou can change the base station's 4-digit default system PIN ("0000") to a 4-digit PIN known only to you.§Menu§ ¢Settings ¢Base ¢System PIN~Enter the old system PIN and press §OK§. For security, the PIN is shown as four asterisks (****).~Enter your new system PIN and press §OK§. a Press and hold (idle status). Ç
44Base station settingsC385 V310AM / USA / A31008-M2026-R351-1-6019 / registr_sett.fm / 04.11.2008Version 4, 29.10.2007Resetting the system PINIf you have forgotten the system PIN, you can reset it to the original code 0000 by resetting the base station to its default set-tings. This will also reset every other setting, see "Restoring the base station to the factory settings" ¢page 44.Changing ringer melodiesuVolume:You can choose between five volumes and the "crescendo" ring, ¢page 42. Select "0" to deactivate the base station ringer melody.uRinger melodies:You can set a ringer melody for external calls, ¢page 42. §Menu§ ¢Settings ¢Base ¢Audio Settings ¢Ringer Volume / Ringer MelodyFor how to adjust the settings, ¢page 42. Repeater supportWith a repeater, you can increase the range and reception strength of your base station. You will need to activate repeater mode. This will terminate any calls that are in progress at the time.Precondition: A repeater is registered. The Eco Mode mode is deactivated.§Menu§ ¢Settings ¢Base ¢Additional Features ¢Repeater Mode§Yes§ Press the display key.When repeater mode is active, the menu item is marked with  .Restoring the base station to the factory settingsWhen restoring factory settings: uHandsets are de-registered–When resetting using the menu:All Verizon handsets–When resetting using the key on the base station: Also all handsets of other GAP-capable devicesuIndividual settings are resetuAll lists are deleteduThe system PIN is reset to the original code 0000Only the date and time are retained.Resetting the base station using the menu§Menu§ ¢Settings ¢Base ¢Base Reset §OK§ Press the display key to confirm.Resetting the base station using a key on the base station¤Disconnect the power cord from the base station.¤Hold down the Registration/Paging key (¢page 2) on the base station while reconnecting the power cable to the base station. Press and hold the key until you hear a confirmation tone.The base station has now been reset.Please noteRepeater support and Eco Mode (¢page 38) cancel each other out, meaning both functions cannot be used at the same time.‰
45Connecting the phone to a PABXC385 V310AM / USA / A31008-M2026-R351-1-6019 / pabx.fm / 04.11.2008Version 4, 29.10.2007Connecting the phone to a PABXThe following settings are only necessary when your PABX requires them; see the PABX user guide.Dialing modes and recallThe current setting is indicated by  .Changing the dialing modeThe following dialing modes can be selected:uTouch-tone dialing (DTMF)uPulse dialing (DP)§Menu§  M4O  ~§OK§ Pulse dialing (DP).Or:   ~Q§OK§ Touch-tone dialing (DTMF). aPress and hold (idle status). Setting recall For operation on a PABX, you may have to change this value. Please refer to the user guide of your PABX.§Menu§  M4O2~Enter digits for the recall time and press §OK§.0=80ms; 1=100ms; 2=120ms; 3= 180 ms; 4= 250 ms; 5= 300 ms; 6= 600 ms; 7=800ms aPress and hold (idle status). Setting pausesChanging the pause after line seizureYou can change the pause length that is inserted between pressing the Talk key c and sending the number. §Menu§  M4OO~Enter digit for the pause length (1= 1 sec.; 2=3sec.; 3= 7 sec) and press §OK§. aPress and hold (idle status). Changing the pause after pressing the Flash keyYou can change the pause length if your PABX requires this (refer to the user guide for your PABX). §Menu§  M4O4~Enter a digit for the pause length (1= 800 ms; 2=1600ms; 3=3200ms) and press §OK§.  aPress and hold (idle status). Switching temporarily to touch-tone dialing (DTMF)If your PABX still operates with pulse dial-ing (DP), but you need touch-tone dialing (DTMF) for a connection (e.g. to listen to the network mailbox), you must switch to touch-tone dialing for the call.Precondition: You are conducting a call or have already dialed an external number.*Press the Asterisk key.After the call has ended, pulse dialing is automatically reacti-vated.‰
46TroubleshootingC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.2007TroubleshootingIf you have any questions about the use of your telephone, you can contact us at any time at http://www.verizon.com.The table below contains a list of common problems and possible solutions.The display is blank.1. The handset is not on.¥Press and hold the End Call key a.2. The batteries are dead.¥Charge or replace the batteries (¢page 12)." Base" flashes in the display.1. The handset is outside the range of the base station.¥Move the handset closer to the base station.The base station's range is shorter because Eco Mode mode is activated.¥Deactivate Eco Mode (¢page 38) or reduce the distance between the hand-set and base station.3. The base station is not on.¥Check the base station's power adapter (¢page 10).Handset does not ring.The ringer melody is deactivated.¥Activate the ringer melody (¢page 42).You cannot hear a ringer melody/dial tone from the fixed line network. The phone cord supplied was not used or was replaced with a different cord that has the wrong pin connections.¥Always use the phone cord supplied or make sure that the pin connections are cor-rect when purchasing one from a retailer (¢page 48).Error tone sounds after system PIN prompt.You have entered the wrong system PIN.¥Reset the system PIN to 0000 (¢page 44).Forgotten the system PIN. ¥Reset the system PIN to 0000 (¢page 44).The other party cannot hear you. You have pressed the §Mute§ display key. The handset is on "mute."¥Activate the microphone again (¢page 27).The number of the caller is not displayed despite CIP.Caller ID is not enabled.¥The caller should ask the network provider to activate caller ID (CI).You hear an error tone (descending tone sequence) when pressing keys.Action has failed/invalid input. ¥Repeat the operation. Watch the display and refer to the user guide if necessary.You cannot listen to messages in the network mailbox.Your PABX is set for pulse dialing.¥Set your PABX to touch-tone dialing.No time is specified for a message in the answer machine history. Date/time is not set.¥Set the date/time (¢page 15).The answer machine announces "PIN is incorrect" during remote operation. 1.You have entered the wrong system PIN. ¥Enter the system PIN again. 2.The system PIN is still set to 0000.¥Change the system PIN (¢page 43).The answer machine will not record any messages. Its memory is full.¥Delete old messages.¥Play back new messages and delete.
www.verizon.com">
47AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.2007AppendixCare¤Wipe the base station, charging cradle, and handset with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can create static. Contact with liquid If the handset should come into contact with liquid:1. Immediately turn the handset off and remove the batteries.2. Allow the liquid to drain from the hand-set.3. Pat all parts dry, and then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (never in a microwave oven, convec-tion oven, etc.).4. Do not switch on the handset again until it has completely dried.When it has fully dried, you should be able to use it again normally.SpecificationsRecommended batteriesTechnology:Nickel-metal hydride (NiMH)Size: AAA (Micro, HR03)Voltage: 1.2 VCapacity: 550–1000 mAhWe recommend the following battery types because these are the only ones that guarantee the specified operating times, full functionality, and long service life:uGP 700 mAhuYuasa Phone 700 mAhuYuasa Phone 800 mAhuYuasa AAA 800uPeacebay 600 mAhThe handset is supplied with UL approved AAA batteries.Handset operating times/charging timesThe operating time of your telephone depends on the capacity and age of the batteries and the way they are used. (All times are maximum possible times and apply when the display backlight is switched off).At the time of publication, batteries up to 800 mAh were available and had been tested in the system. In light of continuous advances in battery technology, the list of recommended batteries is regularly updated.Base station power consumption!Capacity (mAh) approx.550 650 800 1000Standby time (hours)210 240 305 380Talk time (hours)21253138Operating time for 1.5 hours of calls per day (hours)85 100 125 155Charging time, base station (hours)9 111417Charging time, charging cradle (hours)781012In standby mode– Handset in charging cradle– Handset off chargingcradleapprox. 1.3 Wapprox. 1.3 WDuring a call approx. 1.5 W
48AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.2007General specificationsTelephone jack pin connectionsWriting and editing textThe following rules apply when writing text:uUse   ts to move the cursor to the right or left.uCharacters are inserted to the left of the cursor.uThe first letter of directory entry names is automatically capitalized, followed by lowercase letters.Entering charactersPress the relevant key several times to enter letters/characters.Standard characters1) Space2) Line breakWhen you press and hold a key, the char-acters of that key appear in the display and are highlighted one after the other. When you release the key, the highlighted char-acter is inserted into the input field. Setting uppercase/lowercase or digitsPress the Pound key # briefly to switch from "Abc" mode to "123," from "123" to "abc," and from "abc" to "Abc" (uppercase: 1st letter uppercase, all others lowercase). Press the Pound key   #before entering the letter.You can see briefly in the display whether uppercase, lowercase, or digits is selected.DECT standard SupportedGAP standard SupportedNo. of channels 60 duplex channelsRadio frequency range1880–1900 MHzDuplex method Time multiplex, 10 ms frame lengthChannel grid 1728 kHzBit rate 1152 KbpsModulation GFSKLanguage code 32 KbpsTransmission power 10 mW, average power per channelRange Up to 984 feet outdoors, up to 165 feet indoorsBase station power supply 230 V ~/50 HzEnvironmental oper-ating conditions+5°C to +45°C, 20% to 75% relative humidityDialing mode DTMF (touch-tone dial-ing)/DP (pulse dialing)1Unused2Unused3a4b5Unused6Unused3 214 5 6 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x1€£$¥¤2abc2äáàâãç3def3ëéèê4gh i4ïíìî5jkl5Lmno6öñóòôõMpqr s7ßNtuv8üúùûOwx y z 9 ÿ ýæø åQ.,?!0+-:¿¡“‘;_**/()<=>%##@ \ &§1) 2)
49AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.2007FCC / ACTA InformationWarning: Changes or modifications to this unit not expressly approved by Gigaset Commu-nications USA LLC could void the FCC authority to operate the equipment. This includes the addition of any external antenna device.This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of the base station is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network nust comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product iden-tifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN with-out a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.If this equipment causes harm to the telephone network, the telephone company will notify you in advance, that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a com-plaint with the FCC if you belive it is necessary.The telephone company may make changes in its facilities, equipment, operations or proce-dures that could affect the operation of the equipment. If this happens the telephone com-pany will provide advance notice in order for you to make necessary modifications to main-tain uninterrupted service. If you experience trouble with this telephone system, disconnect it from the network until the problem has been corrected or until you are sure that the equip-ment is not malfunctioning.If trouble is experienced with this equipment, for repair or warranty information, please con-tact Verizon Support at 1-866 374 3864. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. This equipment is of a type that is not intented be repaired by the Customer (user).This telephone system may not be used on coin service provided by the telephone company. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or cor-poration commission for information. Privacy of communications may not be ensured when using this phone.If your home has specially wired alarm equip-ment connected to the telephone line, ensure the installation of this equipment does not dis-able your alarm equipment. If you have ques-tions about what will disable alarm equipment, consult your telephone company or a qualified installer.This telephone system equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired opera-tion. These limits are designed to provide reasonable protection against harmful interfer-ence in a residential installation. Some cordless telephones operate at frequencies that may cause interference to nearby TV’s and VCR’s; to minimize or prevent such interference, the system base should not be placed near or on top of a TV or VCR; and, if interference is expe-rienced, moving the base farther away from the TV or VCR will often reduce or eliminate the interference. However, there is no guarantee that interfer-ence will not occur in a particular installation. If this telephone system does cause harmful interference to radio or television reception, which can be determined by turning the system off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the base station and receiver.
50AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.20073. Connect the base station into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio TV technician for help.Notice for Direct Inward Dialing ("DID")ALLOWING THIS EQUIPMENT TO BE OPERATED IN SUCH A MANNER AS TO NOT PROVIDE FOR PROPER ANSWER SUPERVISION AS A VIOLATION OF PART 68 OF THE FCC‘S RULES.Notice to Hearing Aid Wearers: This phone system is compatible with induc-tively coupled hearing aids.Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless tele-phone requires electricity for operation. You should have a telephone that does not require electricity available for use during power out-ages.Notice: The installation of the base unit should allow at least 8 inches between the base and persons to be in compliance with FCC RF exposure guidelines.For body worn operation, the portable part (handset) has been tested and meets FCC RF exposure guidelines. Use with an accessory that contains metal parts may not ensure com-pliance with FCC RF exposure guidelines.Notice to telephone company service:If you need service from your telephone com-pany, please provide them with the information– Facility interface Code (FIC): 02LS2– Service Order Code (SOC): 9.0Y– Universal Service Order Code (USOC) Jack: RJ11C as indicated on the label on the bottom side of the base station.Safety precautionsBefore using your telephone equipment, basic safety instructions should always be followed to reduce the risk of fire, electric shock and injury to persons. 1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp cloth for cleaning. 4. Do not use this product near water, for exam-ple, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement or near a swim-ming pool.5. Place this product securely on a stable sur-face. Serious damage and/or injury may result if the unit falls.6. Slots or openings in the cabinet and the back and bottom are provided for ventilation, to pro-tect it from overheating. These openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a place where proper ventilation is not provided.7. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.8. Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.9. Do not overload wall outlets and extension cords as this can result in the risk of fire or elec-tric shock.10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in the risk of fire or elec-tric shock. Never spill liquid of any kind on this product.11. To reduce the risk of electric shock or burns, do not disassemble this product. Take it to a qualified service center when service is required. Opening or removing covers may expose you to dangerous voltages, dangerous electrical current or other risks. Incorrect reas-sembly can cause electric shock when the appli-ance is subsequently used.
51AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.200712. Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:a.) When the power cord is damaged or frayed.b.) If liquid has been spilled into the product. c.) If the product has been exposed to rain or water. d.) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and may require extensive work by a qualified technician to restore the product to normal operation. e.) If the product has been dropped or physi-cally has been damaged. f.) If the product exhibits a distinct change in performance. 13. Avoid using a telephone (other than a cord-less type) during a thunderstorm. There may be a remote risk of electrical shock from lightning. Therefore we suggest a surge arrestor.14. Do not use the telephone to report a gas leak in the vicinity of the leak.15. Emergency/911 numbers may not be dialed if the keypad is locked.16. Minimum No. 26 AWG telecommunication line cord must be used with this phone.BATTERY SAFETY PRECAUTIONSTo reduce the risk of fire, injury or electric shock, and to properly dispose of batteries, please read and understand the following instructions.CONTAINS ALKALINE NICKEL METAL HYDRIDE BATTERY. BATTERY MUST BE RECYCLED OR DIS-POSED OF PROPERLY. DO NOT DISPOSE OF IN MUNICIPAL WASTE.1. Only use the batteries specified for use with this product.2. DO NOT USE ALKALINE NICKEL CADMIUM OR ALKALINE LITHIUM BATTERIES, or mix batteries of different sizes or from different manufactur-ers in this product. DO NOT USE NONRE-CHARGEABLE BATTERIES.3. Do not dispose of the batteries in a fire; the cells may explode. Do not expose batteries to water. Check with local codes for special dis-posal instructions.4. Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. The electrolyte may be toxic if swallowed.5. Exercise care in handling the batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries or conducting material may over-heat and cause burns or fire.6. Charge the batteries provided with, or identi-fied for use with, this product only in accord-ance with the instructions and limitations spec-ified in the user’s manual. Do not attempt to charge the batteries with any means other than that specified in the users manual.7. Periodically clean the charge contacts on both the charger and handset.
52AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.2007Service (Customer Care)Customer Care Warranty for Cordless ProductsTo obtain Customer Care Warranty service,product operation information, or for problem resolution, call:Toll Free: 1-866-374-38649:00 a.m. – 5:00 p.m. Monday-SaturdaySystem InformationWhen calling the Customer Care service, you may be asked to provide your phone's system information.During the call, proceed as follows:§Menu§ ¢s ¢System InfoOperation HoursSelect entry and press §OK§.The number of hours your system has been operating.§Back§ Press display key.sHS S/W VersionSelect entry and press §OK§.The software version of the handset is dis-played. Use q to scroll through all of the information.§Back§ Press the display key.sBase S/W Ver.Select entry and press §OK§.The software version of the base station is displayed. Use q to scroll through all of the information.§Back§ Press the display key three times to return to normal tele-phone mode.End-user limited warrantyThe Verizon brand and the Verizon trademark are used under license. This product is covered by a one year limited warranty. Any repair replacement or warranty service, and all ques-tions about this product should be directed to: 1-866-374-3864.This limited, non-transferable warranty is pro-vided to the original buyer/end-consumer ("you") for systems, handsets and accessories (collectively, "Product") provided by Gigaset Communications USA LLC ("Gigaset USA"). Gigaset USA warrants to you that at the date of purchase, the product is free of defects in work-manship and materials and the software included in the Product will perform in substan-tial compliance to its program specifications.1. WARRANTY PERIODThe Product warranty period is one (1) year from the original date of purchase by you. Proof of purchase (e.g., sales slip or invoice) must be provided with any Product returned during the warranty period. Batteries supplied with the Products are warranted to be free from defects at the time of purchase only.2. EXCLUSIVE REMEDY Gigaset USA's entire liability and your exclusive remedy if the Product is defective in materials or workmanship during the warranty period and is returned shall be that the Product will be repaired or replaced as set forth in Section 4 below. Reconditioned replacement compo-nents, parts or materials may be used in the replacement or repair. Data in the memory of the Product may be lost during repair.
53AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.20073.THIS LIMITED WARRANTY DOES NOT COVER AND IS VOID WITH RESPECT TO THE FOLLOWING:– Cosmetic damage, physical damage to the surface of the Product, including, without limitation, breakage, cracks, dents, scratches or adhesive marks on the LCD screen or outside casing of the Product.– Products which have been repaired, main-tained or modified (including the antenna) by anyone other than Gigaset USA or a Gigaset USA-approved repair facility, or that have been improperly installed.– Cost of installation, removal or reinstalla-tion.– Damage due to any telephone, electronic, hardware or software program, network, Internet or computer malfunctions, failures, or difficulties of any kind, including without limitation, server failure or incomplete, incorrect, garbled or delayed computer transmissions.– Equipment and components not manufac-tured, supplied or authorized by Gigaset USA.– Modification of the Product's components, or operation of the Product in an unsuitable environment or in a manner for which it is not intended, including but not limited to failures or defects caused by misuse, abuse, accidents, physical damage, abnormal oper-ation, improper handling or storage, neglect, alterations, unauthorized installa-tion, removal or repairs, failure to follow instructions, problems caused by  the car-rier's network coverage, exposure to fire, water or excessive moisture or dampness, floods, or extreme changes in climate or temperature, acts of God, riots, acts of ter-rorism, spills of food or liquids, viruses or other software flaws introduced into the Product, or other acts which are not the fault of Gigaset USA and which the Product is not specified to tolerate, including damage caused by mishandling or blown fuses.– Products which have had warranty stickers, electronic serial number and/or serial number label removed, altered, rendered illegible or fraudulently applied to other equipment.– Signal reception problems (unless caused by defect in material or workmanship in the Product).– Products operated outside published maxi-mum ratings.– Performance of the Products when used in combination with other products or equip-ment not manufactured, supplied or author-ized by Gigaset USA.– Consumables (such as batteries and fuses).– Payments for labor or service to representa-tives or service centers not authorized to perform product maintenance by Gigaset USA.–Loss of data.– Testing and examination discloses that the alleged defect or malfunction in the Product does not exist.This warranty does not cover customer educa-tion, instruction, installation or removal, set up adjustments, problems related to service(s) provided by a carrier or other service provider, and/or signal reception problems. Gigaset USA shall not be responsible for software, firmware, information, or memory data contained in, stored on, or integrated with any Products returned for repair, whether under warranty or not. This warranty is valid only in the United States.USE WITH ACCESSORIES NOT SUPPLIED BY GIGASET USA OR NOT OTHERWISE EXPRESSLY AUTHORIZED BY GIGASET USA MAY VOID WARRANTY.4. WARRANTY CLAIM PROCEDUREAll warranty claims must be made by notifying Gigaset USA prior to the expiration of the war-ranty period. Gigaset USA's obligation to pro-vide warranty support shall not extend past the end of the warranty period, except that any product repaired or replaced during the war-ranty period shall continue to be warranted for the balance of such warranty period or thirty (30) days, whichever is greater. Throughout the warranty period, Verizon Sup-port will be available Monday through Saturday from 9:00 a.m. to 5:00 p.m., excluding National holidays. Support service will be provided for you by accessing the toll free customer service number:1-866-374-3864
54AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.20075. LIMITATION OF WARRANTYGigaset USA makes no warranty or representa-tion that the software in the Products will meet your requirements or will work in combination with any hardware or applications software products provided by third parties, that the operation of the software will be uninterrupted or error free, or that all defects in the software products will be corrected. 6. LIMITATION ON REMEDIES; NO CONSEQUENTIAL OR OTHER DAMAGES Your exclusive remedy for any breach of this limited warranty  is as set forth above. Except for any refund elected by Gigaset USA, YOU ARE NOT ENTITLED TO ANY DAMAGES, INCLUDING BUT NOT LIMITED TO CONSEQUENTIAL DAM-AGES, if the Product does not meet the limited warranty , and, to the maximum extent allowed by applicable law, even if any remedy fails of its essential purpose. The terms below ("Exclusion of Incidental, Consequential and Certain Other Damages") are also incorporated into this lim-ited warranty . Some states/jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limita-tion or exclusion may not apply to you. This lim-ited warranty  gives you specific legal rights. You may have others which vary from state/jurisdiction to state/jurisdiction.7. DISCLAIMER OF WARRANTIES GIGASET USA AND ITS SUPPLIERS PROVIDE THE PRODUCT AND SUPPORT SERVICES (IF ANY) AS IS AND WITH ALL FAULTS. THE LIMITED WAR-RANTY IS IN LIEU OF ANY OTHER EXPRESS WAR-RANTIES (IF ANY) CREATED BY ANY DOCUMEN-TATION OR PACKAGING EXCEPT FOR THE LIM-ITED WARRANTY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IS IN LIEU OF ANY IMPLIED OR STATUTORY WARRAN-TIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY OR COMPLETENESS OR RESPONSES, OF RESULTS, OF WORKMANLIKE EFFORT, OF LACK OF VIRUSES AND OF LACK OF NEGLI-GENCE, ALL WITH REGARD TO THE PRODUCT, AND THE PROVISION OF OR FAILURE TO PRO-VIDE SUPPORT SERVICES. ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, OR CORRE-SPONDENCE TO DESCRIPTION OR NON-INFRINGEMENT WITH REGARD TO THE PROD-UCT. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above exclusions or limitations may not apply to you. If an implied warranty or condition is created by your state and federal or state law prohibits disclaimer of it, you also have an implied warranty or condition, BUT ONLY AS TO DEFECTS DISCOVERED DURING THE PERIOD OF THIS LIMITED WARRANTY (ONE YEAR). AS TO ANY DEFECTS DISCOVERED AFTER THE ONE YEAR PERIOD, THERE IS NO WAR-RANTY OR CONDITION OF ANY KIND. This lim-ited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In no event shall Gigaset USA's liability exceed the cost of repairing or replacing defective Products as provided herein, and any such liabilities will terminate upon expiration of the warranty period.Any supplements or updates to the Product or the software in the Product, including without limitation, any (if any) software fixes or upgrades or bug fixes provided to you after the expiration of the one year limited warranty  period are not covered by any warranty or con-dition, express, implied or statutory.8. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL GIGASET USA, SELLER OR THEIR SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CON-SEQUENTIAL DAMAGES WHATSOEVER (INCLUD-ING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, THE PROVI-SION OF OR FAILURE TO PROVIDE SUPPORT SER-VICES, OR OTHERWISE UNDER OR IN CONNEC-TION WITH ANY PROVISION OF THIS LIMITED WARRANTY, EVEN IN THE EVENT OF THE FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABIL-ITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF GIGASET USA OR SELLER OR ANY SUPPLIER, AND EVEN IF GIGASET USA OR SELLER OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
55AppendixC385 V310AM / USA / A31008-M2026-R351-1-6019 / appendix.fm / 04.11.2008Version 4, 29.10.2007REPAIR OR REPLACEMENT, AS PROVIDED UNDER THE WARRANTY, IS YOUR SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED WAR-RANTY. 9. LIMITATION OF LIABILITY AND REMEDIES NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAM-AGES REFERENCED ABOVE AND ALL DIRECT OR GENERAL DAMAGES), THE ENTIRE LIABILITY OF GIGASET USA, SELLER AND ANY OF THEIR SUP-PLIERS UNDER ANY PROVISION OF THIS LIMITED WARRANTY AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE FOREGOING (EXCEPT FOR ANY REMEDY OF REPAIR OR REPLACEMENT ELECTED BY GIGASET USA OR SELLER OR SUPPLIER WITH RESPECT TO ANY BREACH OF THE LIMITED WAR-RANTY) SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCT OR FIVE DOLLARS ($5.00 USD). THE FOREGOING LIMITATIONS, EXCLUSIONS AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.10. GOVERNING LAW This limited warranty will be governed by the laws of Texas, and excluding the United Nations Convention on Contracts for the International Sale of Goods. If you want to learn more about Verizon Service or for Support on your Verizon phone, visit our web site at http://www.verizon.com or please call 1-866-374-3864.Issued byGigaset Communications GmbH Schlavenhorst 66, D-46395 BocholtGigaset Communications GmbH is a trademark licensee of Siemens AG © Gigaset Communications GmbH 2008All rights reserved.Subject to availability. Rights of modifications reserved.Product attributes subject to change. We reserve the right, to make changes without notice in equipment design and/or compo-nents. Part Number:A31008-M2026-R351-1-6019 © Copyright 2008 Verizon. All rights reserved.
http://www.verizon.com">
56AccessoriesC385 V310AM / USA / A31008-M2026-R351-1-6019 / accessories_SAG.fm / 04.11.2008Version 4, 29.10.2007AccessoriesVerizon V310AM HandsetsADD ADDITIONAL VERIZON V310AM HANDSETS TO YOUR CORDLESS TELEPHONE SYSTEM.Verizon V310AM Handset uIlluminated graphical color display (65,000 colors)uIlluminated keypaduHandsfree talkinguPolyphonic ringer melodiesuDirectory for around 150 entriesuHeadset socket
57Mounting the base station on the wallC385 V310AM / USA / A31008-M2026-R351-1-6019 / accessories_SAG.fm / 04.11.2008Version 4, 29.10.2007Mounting the base station on the wallMounting the charging cradle on the wallapprox. 2.5 mmVerizon 310AM: 46 mmapprox. 2.5 mm21 mm
58IndexC385 V310AM / USA / A31008-M2026-R351-1-6019 / C385SIX.fm / 04.11.2008Version 4, 29.10.2007IndexAAccess protection. . . . . . . . . . . . . . . . 43Accessories . . . . . . . . . . . . . . . . . . . . 56Activatingadvisory tones  . . . . . . . . . . . . . . . . 43answer machine . . . . . . . . . . . . . . . 33answer machine (remote operation). . . . . . . . . . 36call acceptance . . . . . . . . . . . . . . . . 41handset . . . . . . . . . . . . . . . . . . . . . 22internal call screening. . . . . . . . . . . 40keypad lock  . . . . . . . . . . . . . . . . . . 22muting ringer . . . . . . . . . . . . . . . . . 42Advisory tones . . . . . . . . . . . . . . . . . . 43Alarm  . . . . . . . . . . . . . . . . . . . . . . . . 38Alarm repeat . . . . . . . . . . . . . . . . . . . 38Answer machine  . . . . . . . . . . . . . . . . 33list . . . . . . . . . . . . . . . . . . . . . . 30, 31remote operation . . . . . . . . . . . . . . 36Answer machine, see also Network mailboxArea codes. . . . . . . . . . . . . . . . . . . . . 17extra codes. . . . . . . . . . . . . . . . . . . 17local area code . . . . . . . . . . . . . . . . 17Asterisk key . . . . . . . . . . . . . . . . . . 1, 42Auto answer  . . . . . . . . . . . . . . . . . . . 41Automaticcall acceptance . . . . . . . . . . . . . . . . 26BBacklight . . . . . . . . . . . . . . . . . . . . . . 41Base stationconnecting . . . . . . . . . . . . . . . . . . . 10connecting to PABX. . . . . . . . . . . . . 45power consumption . . . . . . . . . . . . 47restoring factory settings  . . . . . . . . 44setting . . . . . . . . . . . . . . . . . . . . . .43setting up. . . . . . . . . . . . . . . . . . . . 10system PIN . . . . . . . . . . . . . . . . 43, 44Batterycharging. . . . . . . . . . . . . . . . . . . 1, 14display . . . . . . . . . . . . . . . . . . . . . . .1icon . . . . . . . . . . . . . . . . . . . . . . 1, 13inserting  . . . . . . . . . . . . . . . . . . . . 12recommended batteries  . . . . . . . . . 47warning tone . . . . . . . . . . . . . . . . . 43CCallaccepting  . . . . . . . . . . . . . . . . . . . 26ending  . . . . . . . . . . . . . . . . . . . . . 26external. . . . . . . . . . . . . . . . . . . . .  26internal . . . . . . . . . . . . . . . . . . . . .  40party listening in . . . . . . . . . . . . . .  40picking up from answer machine  . .  34transferring (connecting) . . . . . . . . 40Call acceptance. . . . . . . . . . . . . .  35, 41Call duration . . . . . . . . . . . . . . . .  26, 32Call history . . . . . . . . . . . . . . . . . . . .  30Call screening during recording . . . . .  35Call waiting during an internal call . . .  40Caller ID . . . . . . . . . . . . . . . . . . . . . .  26Callingexternal. . . . . . . . . . . . . . . . . . . . .  26internal . . . . . . . . . . . . . . . . . . . . .  40Care of the telephone . . . . . . . . . . . .  47Changingdialing mode . . . . . . . . . . . . . . . . .  45earpiece volume  . . . . . . . . . . . . . . 41handsfree volume . . . . . . . . . . . . .  41pause time  . . . . . . . . . . . . . . . . . . 45system PIN  . . . . . . . . . . . . . . .  43, 44Character set  . . . . . . . . . . . . . . . . . .  48Charge status display  . . . . . . . . . . . . . 1CID 2.5 services (network services)  . .  27Color scheme . . . . . . . . . . . . . . . . . .  41Conference. . . . . . . . . . . . . . . . . . . . 40Configuring the network mailbox. . . . 37Confirmation tone. . . . . . . . . . . . . . . 43Connectingbase station to PABX  . . . . . . . . . . . 45headset . . . . . . . . . . . . . . . . . . . . . 18Contrast . . . . . . . . . . . . . . . . . . . . . . 41Control key . . . . . . . . . . . . . . . . . .  1, 20Correcting incorrect entries . . . . . . . . 21Customer Care  . . . . . . . . . . . . . . . . .  52DDeactivatingadvisory tones . . . . . . . . . . . . . . . .  43answer machine  . . . . . . . . . . . . . . 33call acceptance  . . . . . . . . . . . . . . . 41handset. . . . . . . . . . . . . . . . . . . . . 22internal call screening  . . . . . . . . . .  40keypad lock . . . . . . . . . . . . . . . . . .  22muting ringer  . . . . . . . . . . . . . . . .  42

Navigation menu