Gigastone GB-5421B Bluetooth headset User Manual SHS 102 W

Gigastone Corp. Bluetooth headset SHS 102 W

15_GB-5421B UserMan

   GB-5421B  Bluetooth Headset
  Step 1 Pairing GB-5421B  LED light  Power / Accept Call button  • Short press Power button to switch on.Long Press Power button for 3 seconds to senter into pairing mode.(LED will flash red and blue) Step 2        Click to pair  • Search for GB-5421B on your phone, click to pair. • If requested use the pairing code “0000”.
 Making / Receiving Calls   Volume up /    Next track Accept / Reject calls / Play / Pause button Volume down /    Previous track  • Short press Accept to accept and end calls • Double click Accept button to redial last number • Long press Reject button to reject calls  Listening to Music • Press Play / Pause button   to Play or Pause your music • Press “+” to increase the volume, Long press to skip the song • Press “-” to decrease the volume, Long press to skip to previous song
 Charging  • Connect with the provided microUSB to USB-A charging cable • If using a charger, please make sure the voltage is 5V 1Amp • Do not use any charger with a higher voltage • Headset will be fully charged in 1 hour  Earplugs      Small   Medium     Large  Use the suitable earplug for the best Music & Calling experience
  • 1 Charging cable  • 1 User Manual   Technical Specifications • Bluetooth Version  4.2  • Talk Time  3 Hours  • Charging Time  2 Hours  • Standby time  120 Hours  • Operating Distance  10 Meter    In the Box  • 3 X Ear Plugs
    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help  Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu