Global Technologies PANSAT3500S Digital Satellite Receiver User Manual Pansat3500S 0519

Download:
Mirror Download [FCC.gov]
Document ID	549357
Application ID	uzl6HsXctROtmahETwISbQ==
Document Description	Users Manual Part II
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	225.6kB (2819997 bits)
Date Submitted	2005-06-08 00:00:00
Date Available	2005-06-08 00:00:00
Creation Date	2005-06-08 10:01:20
Producing Software	Acrobat PDFWriter 5.0 Windows NT¿ë
Document Lastmod	2005-06-08 10:01:51
Document Title	Pansat3500S-0519
Document Creator	Microsoft PowerPoint - [Pansat3500S-0519]
Document Author:	이형석

1 OVERVIEW
3. REAR PANEL
17
16 15 141312
234 557591011
NO NAME FUNCTION
1 +5 de tor mechanical polarizer
GND IL Used Ior switching external signal (LNB)
2 S-VHS Super Video output to TV or VCR
3 UHF Option Ior UHF Remote control kit
4 S/PDIF For Digital Audio out
5 R8232 Serial pon used Ior soitware downloading
6 L Lei‘t audio output
7 R Right audio output
5 Y Component Video Output
9 Pb Component Video Output
10 TV OUT Output to TV
11 IF OUTPUT IF Loop-through output to 2nd receiver
12 IF INPUT IF INPUT from LNB to receiver
13 Modumor Switch CH 314 Switch
14 ANT IN Input from [enemal TV antema
15 Pr Component Video Output
16 VIDEO Composite video output
17 AC SWITCH AC Power ON I OFF (Fiesel Function)
........ (g 2005 by Panarsx Electronics
OVERVIEW 1
4. SIMPLE DIGITAL CONNECTION
When connecting receiver to TV and VCR with RF cable (Single
Antenna)
TV TV Antenna
Small“! Antenna
VCR
HF IN FF out RF in
9—9
Hm Systnm
Digital Receiver
(9 was by Panarex Electronics ---------
OPERATION
1 OVERVIEW
5. ANALOG / DIGITAL CONNECTION I. Start Up
When connecting receiver to analog reoelver and VCR with HF It you are watching TV through the RF—cable, you need to adjust the Channel
Cable number, The type 01 TV and Channel numbers are set to PAL-G and Channel 38 at
the tactory For USA. Ch 3 is lactory preset
Please lollow the briet procedure below and watch the satellite programs.
Tv Antenna Salon-re Antenna (1) Select me language
(2) Select the antenna setup in main menu screen
(3) Adjust LNB configuration per each satellite
(4) Execute scanning to find program
(5) Exit trom unstallalion alter all programs are searched.
1.1 Language
When the receiver ls turned on tor the first
time the language selection menu is
appeared as in the Fig 14,
Select the destrad language and press OK
to confirm it.
TV Anatoge Receiver
VCR
arm ”out NFIN
T—?
This receiver supports 7 languages,
English,
German.
French.
Portugal.
Spanish.
Turkish,
Arabict
22
------- © zoos by Panarrtx Etectromcs ® 2005 by Panarex Electronics
2.1 Antenna Setup
Press the OK key. Use common password “0000" Parental control and channel
edit are not aocessable until satellite channels scanned and saved. Antenna
setup is appeared on screen as upper second figure
In this section you could know how to
operate LNB set-up
2.1.1 Satellite
- When you adiust the LNB set-up. you
select the satellite usmg <8- ) key
‘ After selecting the satellite, Press OK
-Adjust LNB type, LNB Lo-Freq. 22kHz.
DiSEqC, [NB power. 0/12V, TP, Positioner Setting
. You can cancel the satellite you chose using 48» key
2.1.2 LNB typo
Select LNBtype usmg 1 b keys.
There are 5 LNB alternatives.
- Universal 1 (9750MHz at 10600 MHz)
' Universal 2 (9750MH1 E 10750 MHz)
- Single-8L (5150MHz a 5750 MHz)
' SingIeSH (5150MHz a 5750 MHz)
- Standard For USA (10750 or 11250)
- Single Staok(107SO(V)/10175(H))
22kHz oontrol is automatically set ior each LNB alternative
it Universal 1 or 2 is selected. 22kHz control should be 'otl state "
LE] 2005 by Panarcx EIcclronlES
OPERATION
2.1.3 LNB Lo-Freq
It the required LNB lrequency is not available, select “Standard" and then enter
the lrequency manually using the numeric keys
For USA : C-Band LIO 5150 MHz
Ku-Band LIO 10750 MHz. 11250MH2
2.1.4 22k“:
in case you are usang a Dual LNB or two antennas connected to a 22kHz tone
switch box. make 22kHz tone switch “ON“ or ‘OFF‘ to select an LNB or an
antenna
2.1.5 05ch
- DlSEqC 1,0. 1,2. 1 3 (STAB USALS) is compatible,
- DiSEqC 2X1 8. 4X1 is usually available
2.1.6 Skew
In case that LNB wtth mechanical polarizer is used in your system,
Adjust skew value by using “ 11>"key and check signal status bar at the same
time Keep on adjusting at the maximum signal status
2.1.7 TP
Select a specific transponder by ustng the VOL 4 b keys
2.1.8 Petitioner Senlng
it is used to set the DiSEqC 1 2 motor & USALS
If you have no positioner equipment, Select “Disable“ Othervrise you can select
either DiSEqC 1.2 or USALS.
1) DISch 1.2
(1) Current position
Select the position number by using 4 > keys (#O~#26 default delme.
127449 users define)
(2) Movement
Select East I West by using 1 b keys and press 0K to stop
(3) Nudge East 1 West
Select Nudge East I West by using 1 b keys and press OK to save current
position
(4) East Limit Set
Move the posmon to the most eastern posnion and press OK then East Limit
is stored
(E) 2005 by Panarox Electronics
2 OPERATION
(5) West Limit Set
Move the position to the most western position OK then East Limit is stored
(G) Limits Disable
Select Disable limits by using OK key
(7) Go to reterence
Select got to relevance by using 0K key
2) USALS (DISch 1.3)
(1) Satellite Position
It points out the position of saved satellite
You can change the position of the satellite by numeric keys
(2) My Longitude
Please input Local Longitude by numenc keys
(3) My latitude
Please input Local Latitude by numeric keys
(4) Reference position
This is same as DiSEqC 1 2 Relerence
(5) Move
The satellites position at (1) and the one calculated by value of (2) a (3) Will
be shown Press OK key and it will move
(6) Store
Please selecl "Store" and the present position will be saved
2.1.9 Smlllta Scan
Alter all LNB setting is linished. adjust antenna direction toword satellite until
Signal quality level maximized. Then select and confirm Satellite scan to start
scan and saved,
t It you press SIG key on Flcu. signal strngtn menu Will be displayed on the
screen.
2.2 Satellite scan
Scan all the transponder at selected
satellites.
(1) Press OK key and Select wanted
satellite by using 7&Akey
(If you want to scan several satellites
once. You can control by 4 b keys)
Then press OK key to execute scanning.
(2) You can select satellites whatever You
chose though. It is possible to search only
for 4 satellites among satellites you chose
(3) Transponder Will be consecutively scanned all selected satellites
(E) ZDUS by Panaicx Electronics
OPERATION 2
2.3 TP scan
Selected TP is scanned in this menu
(1) Select TP scan in the installation menu
(2) Select a satellite
(3) Select TP to scan by using the av key (using 4 b keys you can
multiscan), then press OK to search
2.4 Network Scan
Procedure tor setting up is same as TP scan.
Advantage All the TPs belong to same network group Will be automatically
scanned.
2.5 Advanced Scan
Advanced Scan is used to scan the new TP at which the parameters have been
entered manually. After setting the search parameters like down frequency. symbol
rate and polarity by using the numeric keys and VOL 4 b keys. press “OK "
Setting Video PID/Audio PlD/PCR PlD
- You can set the PID to search program.
- Alter setting the PID values. press OK key.
2.6 Smart Search
Smart Search enables to search and scan all channels in the satellite without
any preprogrammed data.
2.8.1 Now to add a new satellite
1 Select the satellite name with 1 >
keys
2. It you want to add a new satellite. press
the OK key.
2.8.2 LNB Configulflofl
Please refer to 4 1 Antenna Setup
2.8.3 Symbol range
- Select Full, High or Low
- Full High and Low
- High 1>7 5M ~ Low .<7.5M
2.3.4 Polarity
~Select Horizontal /Vertical with 4 5
keys
- All : Scan Horizontal and Vertical.
- Horizontal . Scan Horizontal TP only.
° Vertical ‘ Scan Venicai TP only
2.3.5 Sean
- Select Scan type with 4 b keys,
- When you select the OK key, the scanning will start.
(E) 2005 by Panarox Electronics
2 OPERATION
2.7 Edit TP/ Satellite
In this mode. you can add the New- Satellite and the new transponder
intormation,
Also you can update or delete the transponder iniormation.
2.7.1 How to add a new satellite
- Select "New" in the satellite name the ustng the numeric key or CH AV key.
Press VOL 4 D keys to move digit
- Maxrmum number 01 characters ls 12-digit
- Press OK key
- Enter the Down lrequency. Symbol Rate and LNB Polarity
- Press EXIT or OK key. the new transponder intormation is stored.
2.1.2 How to rename the aatelllta
' Press OK alter selecting a satellite of which you want to change name,
- Select “Rename” in the menu.
- Enter new name by using numeric key or CH AV keys and press OK key
2.7.3 How to Doletamastora a satellite
- Press OK key alter selecting a satellite you want to delete.
~ Press OK to confirm, otherwise press EXIT to cancel. The color at the deleted
satellite name in the list is changed.
' The satellite which has had already searched channels cannot be deleted.
- To restore the deleted satellite, move the cursor to the deleted satellite and
press OK key. Then select “Restore' in the screen and press OK key.
2.7.4 How to add a new transponder
- Press OK alter selecting a satellite
- Select Edit TP and then Transponder list is shown
~ Press OK key selecting "NEW" in the transponder list
- Enter the Down frequency. Symbol Rate and LNB Polenty
- Press EXIT or OK. the new transponder rntormation is stored
2.7.5 How to delete or update a transponder added
' Press OK key after selecting a satellite
~ Select Edit TP. then transponder list is shown
- Select a transponder you want to delete or update
- Press OK on theTP you want to Edit or Delete
~ You can see the Edit or Delete in the small-menu
- In case you want to Edit a list TP
Select EDIT and press "OK key
Enter Down lreouency, LNB polarity and Symbol Flats and press "EXIT“ or OK
Then New TP date is automatically updated
- In case you want to Delete a TP
Select Delete in the small menu. press OK key
Then the TP selected is deleted
(2) 2005 by Panarux Electronics
OPERATION
3. Parental Control
Alter selecting Parental control and entering
the correct password. the screen as shown in
the right appears The delault password at the
lectory is ‘0—0—0—0".
You may change the PIN code. which is your
password In other words. and lock the
receiver to prevent children lrom watching
selected programs.
3.1 Change PIN Code
You can change the PIN Code (Password) it you want.
(1) Enter the Old password. it you enter this mode for the tirst tlme alter
purchasing the receiver, the OLD PIN Code is the delault password.
(2) Enter the new password.
(3) Reenter the new password to confirm.
' In case ol lorgotten password programmed. cell dealer to get master lactory
password.
Warnlng! You must remember the New password because it is used in several
Function as follows
Password is required
(1) To show parental locked channels
(2) To enter Parental Control menu
(3) To enter channel edit menu
(4) To execute lactory setting
E) 2005 by Panarcx EloCl'OfllcS
2 OPERATION
4. Channel Edit
In this mode
(1) You can sort the channels out upon your Preference.
(2) You can rearrange the channel list
(3) You can delete channel
(4) You can adjust the favorite channel list, as required,
(5) You can skip channels,
(6) You can change the channel name, as you want
(7) To enter channel edit mode. you need to press 4 digit password (factory
setting is "0-00-0")
4.1 How to son the channel
(1) Press OK alter selecting Sort.
(2) Sub mode will be appeared as follows
- Alphabetic
- Satellite
- PTA/Scramble
- P-Lock
(3) Select the mode among the 4 kinds of
mode that you want to son and press OK
(4) Press EXIT to exit from this mode,
rim
The Formal Sorted Llu
-Alphebaic&8atelfile: In Alphabdioelords'
-FrABaa|hble:ThoFm-Mdofirst&hommblodchamdsmtd
vice-verse
-P-ank:ThadtarrnelsolP-Lockfisl
4.2 How to move the channel
(1) Presslhe "OK' key alter Selecting 'Move' key
(2) Press OK to select a channel to move and then move the selected channel
to the new positron by usrng CH AV keys
(3) Flepress“0K" key
(E) 2005 by Panarcx Electronics
OPERATION
4.3 How to delete the channel
(1) Select “Delete" and press ‘OK.’
(2) Select a channel you want to delete by using the 1 bkey.
(3) Press OK key
(4) All channels that you selected are deleted
4.4 How to storefrelease the favorite channel
(1) Select “Favorite" and press "OK.‘
(2) Press ‘OK". then this channel is included to the favorite channel list
(3) The mark stands for the lavon‘te cannel
(4) To delete a channel from the favorite list, go to the marked channel and
Press “OK".
4.5 How to lock/unlock the channel
(1) Select P-LOCK in the screen as shown and press OK.
(2) Select the channel that you want to lock and press “OK’,
(3) This channel is now locked and the symbol of lock will be shown as a locked
channel.
(4) You can release the locked channel if you press OK atter selecting the
locked channel.
(5) Once locked channel is selected while watching televrsion. password is
requested
(6) Picture and sound is appeared after the correct password is given by
pressing the numeric key.
4.6 How to 8K]? the channel
(1) Select “SKIP" and then press “OK"
(2) Select the channel you want to hide
(3) Press “OK"
4.7 How to rename the channel
(1) Press OK alter selecting RENAME mode
(2) Select the channel of which you want to change name
(3) Press OK to enter the character input mode.
(4) Put new names as you want using the 4 arrows keys and numeric key. The
maxrmum number of characters is 20.
(5) After completion of entering new. press OK
(5) 2005 by Panarck Electronics
OPERATION
5. User Setup
In this USER SETUP mode. you can select
the sub-mode as shown on the [Fig 6] by
pressing the 0K key and CH Av key
The changed set-up is activated and stored
by pressing the EXIT key
5.1 Language
Press the EXIT key after you select your
prelerable language by using VOL 1 5
key.
English, German. French, Portugal. Spanish. Turkish, Arabic. Croatia
5.2 Aspect ratio
You can set the TV aspect ratio (43 for normal TV Sr 16:9 for wide TV) by
pressmg VOL 4 ’ keys
5.3 TV Type (USA Standard is NTSC)
You can set the TV type (PAL, NTSC and AUTO) by pressing VOL4 b keys.
It the setting value is Auto. then TV is set automatically by source program.
So. the source program is PAL. TV set PAL source program is NTSC. TV set
NTSC.
- in case you selected PAL mode accidentally and the TV picture rolling up and
down. press remote button as lollows to recover.
Power Otl HTAST a SIG a Power ON
5.4 Time Setting
Alter selecting the Time Setting. you can
adiust the time, Also you can set the
wakeup time and sleeping time to turn
receiver on and oil automatically
according to the time programmed
(E) 2005 by Panaicx Electronics
OPERATION
5.5 Modulator
It you want to watch the broadcasting through. the modulator output. you could
change the modulator channel as follows after pressing the OK key to enter the
sub-menu
(1) NTSC is supported
(2) You can adjust the Modulator type by pressing VOL 4 P key
(3) You can adjust Modulator type. you can go back to the previous mode by
pressing EXIT or OK key.
(4) The adjusted data is programmed automatically when the EXIT key is
pressed
(5) Modulator channel can be changed trom the channel 3 to channel 4.
1) Set TV channel to 3 and find menu screen
2) Select modulator column and change the channel number by 4 b key
3) Press "EXIT" key to store and menu screen is appeared.
4) Tune TV channel to the channel newly stored as in the above.
5.6 030 setting
You can adjust the transparency level by using 4 P key.
5.7 Data Transler (Receiver to Heoeiver)
1) Connect NulI Modem RS 232 Cable (Pin #2 8. 3 twisted) between master and
slave receiver.
2) Leave the slave receiver power on condition all the time until oompletion ol
date transfer
3) Hook up the master receiver to the TV and select ”SW Transter' at “User
Setup" screen.
4) Select "Ver Code“ or "Ch Data" by using "Vol 4" or “Vol b" button Then press
“CH' button to start transter Dunng data transter. processing percentage mil be
displayed on the screen.
Wartime! Do not disturb data transfer by touching any Remote button. 83232
Cable, IF Cable. RCA Cable etc. during data transfer period until
"Please wait tor savtng‘ massage disappeared. Interruption of data
transfer could damage the receiver's flash memory chip which makes
the receiver dead and void warranty,
(5) 20.15 by Panarcx Electronics
OPERATION
6. Factory Setting
Once the Factory setting is selected and the
correct password IS given by presstng 4-digit
numeric keys tollowed by OK key. whole
parameters are changed to the value wrnten
in the factory That is. factory setting functions
your STB (Set Top Box) the first stage If you
do not want to continue this mode. press EXlT
key Detore you enter password,
7. System Information
Shows the infonnatlon 01 model name. data and versron of STB
8. Channel] st
' you can see the channel list as shown in
the above llgure by pressrng 0K key
-To watch another channel. move the
cursor to the channel you want by usrng
{bkeys AV PG T PG 1 and press
OK key
' ll lavonte channels are saved, the list is
changed from channel list TV to tavorlte
list
- Pressing TV/RADIO key change lrom
channel list to channel list Radio You can exit lrom the channel list menu by
pressrng "EXIT" key or “OK‘ key
® ZDCIS by Panarck Electronics
9. Program Guide
- The title and start time of the program is
shown as in the right figure alter
pressing EPG key.
- Select the particular channel you The
channel will be changed.
- It you want to watch TV with lull screen.
Press EXIT
10. Audio change
- In multilingual program, lavorile
language is selected by passing AUDIO
key and CH Av keys
- Audio mode lL-lett, R-nght, LIE-stereo)
can be Changed By pressing AUDIO key
and VOL4 > key
(E) 2005 by Panarex Electronics
OPERATION 2
OPERATION
ll. SD Memory 2. FLASH BACK UP( RECEIVER to SD CARD)
I. FLASH UPGRADE
( SD CARD to RECEIVER)
a) Insert SD CAFlD into the recetver SD
CARD slot
h)SeIect SD memory at Main Menu and
pressOK button
c)Select the Bin file to transler
(Verston code or CH data) and
pressOK button "Enter
BACK UP to lind the files
previously backed up from the
recetver
d) Wait until the receiver lully
rebooted alter wrttlng completed
(about 40 secondstr
3) Insert SD CARD into the recetver SD CARD slot
b) Select SD memory at Main Menu and press OK button.
0) Select BACKUP and press OK button
d) Code Backup Press Red button on the remote and make desired me name up to
8 digits . move cursor to OK tent and press OK button Wait about 10 seconds to
complete CH Data Backup Press Green button on the remote and repeat same
as above
(Note , MMC CARD may be also interlaced)
’ ‘Q 2005 by Panarct Electromcs @ 2005 by Fanarcx Electronics ‘
2 OPERATION
3. MP 3 PLAY
a) Insert SD CARD mm the receiver SD
CAFtD slot
bl Select SD memory at Main Menu and
press OK button
c) Select MP 3 and press OK button
d) Select the MP 3 tile to play and press OK
button
at For multlple MP 3 play, use Ielt/rlght
volume buttons to select or cancel the files to
play All selected tlles( up to 20) erI be played one by one
12. Embedded
-lt you insert Smart Card lnside the
receiver smart card reader, the receiver
will recognize rt automatlcally
(El 2004 by Panarex Electronics
OPERATION
13. Recall the Favorite channel
- Press the FAV key to recall a stored lavonte channel
- Favorite channel is programmed and stored in the channel edit menu,
14. Download Procedure between Pansat 35008 & PC
1 Turn the recelver power on
2 Connect Null Modern RSZSZC cable ”2&3 thsted) between PC and the
receiver
3 Open the GTFtom Loader 01 35008 model
4, Select the BIN file to download
5 Select the File type and press Download
6 Walt until Download and the recelver Flash wnte are tuIIy completed.
Warning: Do not interrupt the receiver power until download and flash write are
tulty completed Otherwrse the recelver will be damaged or dead
@ 2004 by Panarex Electromcs
UHF Receiver on the condition that AC power cord of the
g WARNING :To prevent electncal shortage, do not install the
Satellite Receiver is plugged in.
3.1 KIT LIST
1. UHF Rmeiver 2 UHF Antenna
3. UHF Remote Control 4. Battery(AAA Type) - chs.
3.2 INSTALLATION
1. Take on the AC power plug 0! the Satellite Receiver from the wall socket.
2. Connect the UHF antenna to ANT IN.
3. Connect the Cable Assembly to the UHF RX IN on the rear or the Satellite
Receiver.
4. Plug the AC poweroord and turn on the receiver.
5. Use UHF Remote Controller.
THE REAR OF SATELLITE HE Ell/ER
3.3 SPECIFICATION
UHF Receiver FREQUENCY ,,
MODULATION MODE
UHF INPUT LEVEL -95dBm
(sensrrivrrv)
m—
UHF Remote Control INDOOR USE
OUTDOOR USE About 200m
BATTERIE AAAT p z
a?
------- (E) 2004 by Pawex Eleceonice
SPECIFICATIONS 4
Embedded smart card etc!
1 Smart Card Reader
SD—CARD interim
t SD-Cwfl mam
memory card slot
(Note : MAC CARD may be also lute-heed)
Front-End
2 tripul Connector F—rype. EC toe-24
IF Input Flatware; W1 TO 2150M'IZ
IFLDWWWM WITONSOM'IZ
IF Frequency Zero-IF
Input LMI 65 dSm~ -25d&n
LNB Power |3H8VDCIWT|AW
06ch Control Version 1.3 Compalble
Ema Slimming 22m: Tone
Demodulalan OPSK
System Rate t-fiMspstSCPCMCPC)
Vlerbi Demo Rate 112. 2'3, 3“. 5/6, 7/3
MSolomon Domain FECZZM, 188. E8
Disch 1.3 Correlatitle
(STAB USALS)
MPEG Tranlport Strum Ct AN Decoding
Denmllpiex According to
some 13mm
tnput Stream mx. sown/s
Aspea Rm 413, 16.9
Vlieo ReeoIIBon 720 x 576{PAL).
720 x 480 (NTSC)
Audio Decocing WEG layer I and II
Audio Mode Shinto/Bud Channel,
Stereo, Jolnl Stereo
Mo Sunni-lg Homeric, unaware/44.1 4am
Microprocessor at ”sunrise
Mair Fromm SH 5513 eve. smo 32 hit
CPU Clock at monoo MIPS)
Flash Memory 2 Wyle
SDRAM is Mme
EEPROM 32 mm
Data Port
Comeclor 9 fin D-aib Type
Protocol R8232 Anna-muons
Data Rate Max. teams
6) 2004 by Erin! Wx-Emonmsw
RF Modtrlator
Cor-rector EC 189-24 Male! Femde
Frequency CH 3 (61 ,25M»lzl
Cl-M (57.25 M-iz)
Otrhut Chmnei CH 3-4
TV Stand”! NTSC
Preset Channel OHS, Chmneahto by
Menu Screen
From Panel
4 Dlgits LED Display Chamd Number Dinky
8 Keys Power, enamel Lia/Down.
Voltane Lip/Down. OK.
Exit Menu
Rear Panel
IF input F-Iype Connector
IF Loootr-oum output F-lype Connector
6 Phone (Cindtl Video. M0 L. Audlo Fl.
VPbPr
S/PDIF Optical
Show 3 Push Terminal (5V. GM). PULSE)
S-VHS
UHF
ModLlanr
H3232 Serial Port 9 Pin D—sth Type
VlPo/Pr Digital Component Video Out
Remote Control
Type hire-red
(Canier Freq : 38 KHI)
Battery 2 x 1.5V AM Type
Electrical and ”nautical
trout Voltage “290-250. MHZ
Power (brownish Max. 55 Watts
filmy Power Less inn 5 Watts
Dimension 290 x 200 x 65 mm
alias
5 TROUBLE SHOOTING
There may be various reasons for the abnormal ot the unit. Therefore. it the unit
does not work property.
check the unit according to the procedures shown in the table below.
Problem
Possible causes
Remedy
LED on front panel AC power cord
does not light
disconnected
Connect power cord properly
into the power socket
No Picture or
sound
Blackout-Mite
screen or V-Hold
Wrong connection or the
video/audio output to TV
input terminal
Wrong connection or
satellite antenna cable
Wrong direction at satellite
antenna
No signal or weak signal
Wrong setting or channel
intormatton in MENU screen
Connect two terminals correclty
wrth scart cable or RCA or FiF
cable
Connect the antenna cable
correctly
Adlust the direction ot antenna
Check the cable connections.
LNB and other equipment
connected between the LNG and
the receiver or adjust the
antenna
Type the setting value correctly
Your TV mode is ditterent
from satellite broadcasting
mode
Use TV 01 same mode
Use the NTSCIPAL converter
connected to the receiver and
TV
The remote
controller is not
wearing
Battery exhausted
Fluorement light interfering
with the remote controller
Remote controller is
incorrectly aimed
Change the bananas
Switch oft the light
Aim the remote control at the
receiver
Too high brightness and
contrast level at TV set
Adjust brightness and contrast to
low level
Ftemove the power code or
AC switch OFF/ON
---»@~»2m5-br maximum Elecaonics

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:72809bee-83a3-4386-94b7-b2201baceda8
Modify Date                     : 2005:06:08 10:01:51+02:00
Create Date                     : 2005:06:08 10:01:20+02:00
Metadata Date                   : 2005:06:08 10:01:51+02:00
Document ID                     : uuid:84110b3b-94dc-4c68-bda5-dbc595e4b55a
Format                          : application/pdf
Title                           : Pansat3500S-0519
Creator                         : Microsoft PowerPoint - [Pansat3500S-0519]
Author                          : 이형석
Producer                        : Acrobat PDFWriter 5.0 Windows NT¿ë

EXIF Metadata provided by EXIF.tools