GlobalSat WorldCom BTA-830 Bluetooth Audio Gateway User Manual Manual

GlobalSat WorldCom Corporation Bluetooth Audio Gateway Manual

Manual

BTH-820, BTA-830 user manual     page 1     Bluetooth Stereo Headset & Stereo Audio Gateway   User manual, version 1.0      Copyright © 2005 GlobalSat Technology Corporation. All rights reserved The trademarks mentioned in this document are legally registered to their respective companies.
BTH-820, BTA-830 user manual     page 2    Table of Content  Introduction .......................................................................................................3 Features .............................................................................................................3 Specification......................................................................................................5 BTH-820 button function...................................................................................6 LED indicator function......................................................................................6 Turn on and off, pairing and charging the device...........................................7 Pairing procedure..............................................................................................7 Troubleshooting ................................................................................................8
BTH-820, BTA-830 user manual     page 3  Introduction  BTH-820 Bluetooth Stereo Headset provides you the CD quality stereo sound. If a call is coming while you are listening to the music, just press any button to receive the call. Meanwhile, the music will stop automatically, and then resume itself after you hang up the phone.   BTA-830 Bluetooth Stereo Audio Gateway enables your audio device to have the ability of wireless Bluetooth transmission. It can transmit crystal clear digital sound to any compatible Bluetooth audio receiver up to 10 meters away. Just plug the BTA-830 into the headphone jack of your audio device (iPod, PDA, MP3 player, CD player, mobile phone, or PC), the audio music will be sent out from BTA-830 by the wireless Bluetooth signal. Then you can use a Bluetooth headset (receiver) to listen to the music. Features BTH-820  BTA-830  Bluetooth Stereo Headset  Light weight and handy design.  Press any button to receive a call.  In the headset mode, you can adjust the volume and refuse to answer a call.  You can answer the call while listening to the music, and the music will resume automatically after you hang up the phone. Built-in Hold key and microphone. A2DP+AVRCP Profile A2DP Profile  You can control the “play”, “pause”, “stop”, “next song” and “previous song” of the Windows Media Player.   Known Supported Device:   Globalsat: BTA-806 / BTA-804A  You can control the play/mute, volume up and down of BTH-820.  Stereo Audio Gateway  Plug-and-Play  Support standard A2DP profile for consistent and clear stereo sound quality.  Compatible with portable CD player, MP3 player, TV, DVD player and more.  Divert the high quality audio from wired to wireless.  Outstanding performance enables you to enjoy the true digital sound with CD stereo quality.  Fast and simple one-button operation.   Bluetooth version 1.1 / 1.2 / 2.0 compatible.  Operation range up to 10 meters. (Open Space)  Stand-by time up to 100 hours  Embedded rechargeable Li-polymer battery  LED indicator for low power and charging.
BTH-820, BTA-830 user manual     page 4        Power button USB power connector Earphone jack Built-in Microphone Hold key USB power connectorPower button
BTH-820, BTA-830 user manual     page 5  Specification Model Name  BTH-820  BTA-830 Product Description  Bluetooth Stereo Headset  Stereo Audio Gateway Color  Blue / Orange  Blue / Orange Certification  FCC, CE, BQB  FCC, CE Bluetooth Version  Bluetooth v1.2 Specification RF Output Power  Class 2 Frequency  Band 2.4GHz ~ 2.4835GHz unlicensed ISM band Spread Spectrum  FHSS (Frequency Hopping Spread Spectrum) Operating Range  10 meters (32 feet) Sensitivity  -80dBm @0.1%BER Bluetooth Profile  Headset,Handsfree,A2DP,AVRCP A2DP Stereo Audio Specification  CD-Quality, 44.1, 48KHz 16-bit Stereo Audio Codec Standby Time  Up to 100 hours Up to 100 hours Play Time  Up to 5 hours Up to 5.5 hours Charging Time  2 ~ 3 hours 2 ~ 3 hours Talking Time  Up to 6.5 hours  -- Audio input  Bluetooth signal  3.5 mm stereo plug Audio Output  3.5 mm stereo jack  Bluetooth signal LED Indicator  2 LEDs : (Blue and red)  2 LEDs :   (Green and red) or (Blue and red) Battery  Rechargeable Li-Polymer battery Operation Temperature  -10 ~ 55  ℃ Storage Temperature  -20 ~ 60  ℃ Humidity  10% ~ 90% non-condensing Dimensions  63.5x28.5x18.5mm(L x W x T), Including back clip  54.5x54.5x17.5mm(L x W x T) Weight  19 g    29 g   Microphone  Embedded microphone, (To avoid the noise interference, please put the microphone within 30 cm from your mouth while talking.) --
BTH-820, BTA-830 user manual     page 6  BTH-820 button function Button  Incoming call is ringing  While on the phone  While playing the music with Bluetooth Dongle (AVRCP, A2DP profile). While playing the music with BTA-830 (A2DP profile)  Answer    Transfer to cell phone  Play / Pause Play / Mute  Refuse the call    Hang up  Stop    Mute  Answer  Volume up  Volume up  Volume up  Answer  Volume down  Volume down  Volume down  Answer N/A  Next  N/A  Answer N/A  Previous  N/A  Lock the buttons  Lock the buttons  Lock the buttons  Lock the buttons Remark 1  --  To avoid the noise interference, please put the microphone within 30 cm from your mouth while talking. Remote control (AVRCP) is supported under “Microsoft Window Media Player”. -- Remark 2   When disconnected, you can connect to the previous paired cell phone by pressing the play key on BTH-820. You can disconnect them by pressing and holding the stop key for 2 seconds.  If BTH-820 is connected only with a cell phone, you can perform the redial function by pressing and holding   or    for 2 seconds. You can initiate voice dialing by pressing and holding the play key for 2 seconds.  LED indicator function Status  BTH-820  BTA-830  Standby  Blue LED flash once  Green(or Blue) LED flash once Connecting  Blue LED flash twice  Green(or Blue) LED flash twice Transferring   Blue LED flash four times  Green(or Blue) LED flash four times Pairing   Blue and red LED flash quickly by turns  Green(or Blue) and red LED flash quickly by turnsLow battery  Red LED is on  Red LED is on
BTH-820, BTA-830 user manual     page 7   Turn on and off, pairing and charging the device  BTH-820  BTA-830 Turn on: Press the power button for 2 seconds until the blue LED is on. Press the power button for 2 seconds until the green(or blue) LED is on. Turn off: Press the power button for 4 seconds until the red LED is on. Press the power button for 2 seconds until the red LED is on. Pairing: While in the off mode, press the power button for 6 seconds,the 2-color LEDs will flash quickly by turns and it will search other device for pairing.   Charging: Connect one end of the charging line to the USB socket of BTH-820 or BTA-830, and the other end to the USB socket of PC or power adapter. The red LED will be on when charging and will be off when battery is full. BTH-820 and BTA-830 will turn off itself when it is in the charging mode.    Pairing procedure To pair  Procedure Pairing password BTH-820 with BTA-830 Press the power button for 6 seconds, the 2-color LEDs will flash alternately and they will search each other for pairing. If pairing is completed, LED will flash four times in every 2 seconds. -- BTA-830 with another Bluetooth headset Set the BTA-830 and your Bluetooth headset to pairing mode, these two devices will start to pair automatically. If pairing is completed, LED will flash four times in every 2 seconds. -- BTH-820 with a Bluetooth cell phone Set the BTH-820 into pairing mode. In your cell phone, enter the Bluetooth menu and select “search device” option. When your cell phone finds the BTH-820, select it to pair. If pairing is completed, red LED will be off, and only blue LED will flash, then you can connect your cell phone to BTH-820. 0000 BTH-820 with a PC Set the BTH-820 into pairing mode. Start the Bluetooth software(for example IVT BlueSoleil 1.6.2 or Widcomm) on your PC and select “search device”. After pairing is completed, you will be able to connect BTH-820 and listen to all the music from PC.   0000
BTH-820, BTA-830 user manual     page 8   Troubleshooting   Check the battery power.   Make sure the devices are turned on.   Make sure the devices have been paired.   Make sure the devices are within the 10 meters range.     Check the volume.     Check if the audio resource is correctly input.   Pair the devices over again.     Can not connect with cell phone : Delete the BTH-820 device in your cell phone, re-start it and do the pairing again.     Can not turn on the device : Do a Reset. Plug in the charging line to the device to enable the electric power passing by and then unplug it. That will perform the “Reset”.   If BTH-820 works with Bluetooth USB dongle which uses IVT BlueSoleil version 1.6.2 or above, TOSHIBA version 3.03.10 or above, it will support A2DP, AVRCP, HEADSET profiles.   If BTH-820 works with Bluetooth USB dongle which uses BROADCOM, WIDCOMM version 4.0.1.700 or above, it will support A2DP, AVRCP profiles.
Federal Communications Commission (FCC) Statement  15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.  15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.   FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.   Notice: Any changes or modification not expressly approved by the party responsible could void the user's authority to operate the device.

Navigation menu