Globalsat Technology Sd 502 Sdio Users Manual 502_User_Manual_Ver_1.2
SD-502 SDIO to the manual 4138ee5f-33be-4afa-81c4-34df7b2bd7ba
2015-02-09
: Globalsat-Technology Globalsat-Technology-Sd-502-Sdio-Users-Manual-560867 globalsat-technology-sd-502-sdio-users-manual-560867 globalsat-technology pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
2005/11 SD-502 SDIO GPS Receiver User Manual page 2 SD-502 SDIO GPS Receiver User Manual, version 1.2 1. SD-502 at a glance LED GPS Antenna Cover page 3 SD-502 SDIO GPS Receiver User Manual, version 1.2 2. System Specification Electrical Characteristics (Receiver) Chipset Frequency SiRF Start III L1, 1575.42 MHz C/A Code 1.023 MHz chip rate Channels 20 channel all-in-view tracking Accuracy Position Horizontal Velocity Time 10 meters, 2D RMS 1~5 meters, 2D RMS with WAAS corrected 0.1 m/sec 1 micro-second synchronized to GPS time Datum Datum WGS-84 (default) Acquistion Rate Hot start 1 sec., average Warm start 38 sec., average Cold start 42 sec., average Reacquisition 0.1 sec., average GPS Protocol NMEA 0183 (default) SiRF binary (secondary) Protocol GPS Output format GGA (1 sec), GSA (1 sec), GSV (5 sec), RMC (1 sec). GLL and VTG are optional. Dynamic Condition Acceleration Limit Less than 4g Altitude Limit 18,000 meters (60,000 feet) max. Velocity Limit 515 meters/sec (1,000 knots) max. Jerk Limit 20 m/sec**3 Operating -10°C ~ +70°C Temperature Humidity 5 ~ 95% non-condensing Power Voltage Power Consumption 3.3 V 110 mA Physical Characteristics Dimension Weight Memory Size 95 mm x 30 mm x 13 mm approximately 30 grams 512 MB SDIO Specification • Compliant with SDIO Card Specification Ver. 1.00 • Base on Bsquare SDIO Now! SD-502 SDIO GPS Receiver User Manual, version 1.2 page 4 3. Introduction SD-502 is a GPS Receiver with SDIO (Security Digital Input/Output) interface and an integrated built-in memory, which provides an impressive data capacity. The built-in 512 MB memory allows you to easily organize, store, and share files or documents. It also allows for tracking signals and large map data according to the mapping software usage. It’s sleek and stylish design of look can go with any kind of the Pocket PC. With light and handy appearance, it is convenient for you to put it in pocket and bring it to anywhere you go. Just plug it into your Pocket PC, and use it to receive the GSP signal right away! Its cylindrical antenna can receive the signal from all directions by 360 degree. It satisfies a wide variety of applications, including car navigation, personal touring navigation or tracking and even marine navigation purpose. With our professional manufacturing technology along with the cutting edge, SiRF Star III chipset, this receiver has provided higher sensitivity, lower power usage and more rapid time-to-fix! 3.1 Features • SiRF Star III high performance and low power consumption chipset • • • • • • • Built-in high sensitivity GPS antenna LED to show GPS fix or not fix Built-in super capacitor to reserve system data for rapid satellite acquisition SDIO interface Operating platform: Pocket PC 2003, Win CE.Net, WM2003 Base on Bsquare SDIO Now! Built-in memory size: 512 MB 3.2 Package Before you start up, make sure that your package includes the following items. If any item is missing or damaged, contact your dealer immediately. • SDIO GPS Receiver and its cover. • A CD (including the User Manual, Driver and the Testing Program.) 3.3 LED Function GPS Status LED (Green): • Blinking — GPS position is fixed • Steady light — GPS position is not fixed SD-502 SDIO GPS Receiver User Manual, version 1.2 3.4 Compatible Device • • • • • Dell Axim X3 Pocket PC Dell Axim X30 Pocket PC Dell Axim X50 Pocket PC Dell Axim X50V Pocket PC Dell Axim X51V Pocket PC • • • • • • • • • • HP iPAQ h1930 Pocket PC HP iPAQ h1940 Pocket PC HP iPAQ h1950 Pocket PC HP iPAQ h2210 Pocket PC HP iPAQ h2750 Pocket PC HP iPAQ h4150 Pocket PC HP iPAQ hx2410 Pocket PC HP iPAQ hx4700 Pocket PC HP iPAQ h6315 Pocket PC HP iPAQ rx3115 Pocket PC • • • • Eten M500 Fujitsu Loox 720 Asus MyPal 730 T-Mobile MDA compact Devices listed above have been tested and proved to be compatible with SD-502. page 5 SD-502 SDIO GPS Receiver User Manual, version 1.2 page 6 4. Install Driver You have to install the driver before you can use the SD-502 GPS receiver with your Pocket PC. The driver will be installed into the Pocket PC via the ActiveSync program. So, before you start, please make sure the ActiveSync has been installed and the Pocket PC is connected to your desktop PC. (1). Put the CD into CD-ROM drive. The AutoRun will start the installation program automatically. Click on the “Install Driver for WinCE” button to install the driver. (or you can manually install it by double click the “GlobalSatSDGPS.exe” from the root directory of the CD. ) (2). Click the Next button on the Welcome dialog box and click Yes button on the End User License Agreement dialog box. SD-502 SDIO GPS Receiver User Manual, version 1.2 page 7 (3). Click Yes and OK on next 2 dialog boxes. Now the driver has been installed in your PDA. (4). Click Exit button to close the AutoRun program. SD-502 SDIO GPS Receiver User Manual, version 1.2 page 8 (5). If you want to check whether the driver has been properly installed or not, please do the following steps. In your PDA, tap Start / Settings, tap System tab and then Remove Programs icon. You will see the driver “LEADCHAIN GPSDisk” is on the list. (6). If you want to check version information of the installed driver. Please tap Start / Programs / File Explorer, go to “My Device / Windows” folder and open the “GPSDiskVersion.txt”. You will see the driver’s version information. SD-502 SDIO GPS Receiver User Manual, version 1.2 page 9 5. Test the SD-502 GPS Receiver You can use the testing program to see if the GPS Receiver is working correctly or not. The testing program only supports the Microsoft Windows CE and Pocket PC based PDA platform. Note : For more detail about this GPSinfo testing program, please refer to the GPSinfo User Manual, you can find it in the root of CD. (GPSinfo_User_Manual_Eng.pdf) To install the testing program, please follow the steps below: (1). Put the CD into CD-ROM drive. The AutoRun will start the installation program automatically. Click on the “Install GPSinfo” button to install the testing program. (or you can manually install it by double click the “GPSinfo.exe” from the root directory of the CD.) (2). Click the Next button to continue. SD-502 SDIO GPS Receiver User Manual, version 1.2 page 10 (3). Click Yes and OK on next 2 dialog boxes. Now the GPSinfo program has been installed in your PDA. (4). Click Finish button and finish the installation and click Exit button to close the AutoRun program. SD-502 SDIO GPS Receiver User Manual, version 1.2 page 11 (5). If you want to check whether the program has been properly installed or not, please do the following steps. In your PDA, tap Start / Settings, tap System tab and then Remove Programs icon. You will see the “GPS Information GPS Info” is on the list. SD-502 SDIO GPS Receiver User Manual, version 1.2 page 12 FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation . FCC RF Exposure requirements: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2005:11:29 14:30:08+08:00 Create Date : 2005:09:13 12:28:07Z Producer : Adobe PDF Library 5.0 Creator : Adobe InDesign 2.0.2 Trapped : False Page Count : 12 Creation Date : 2005:09:13 12:28:07Z Mod Date : 2005:11:29 14:30:08+08:00 Metadata Date : 2005:11:29 14:30:08+08:00 Document ID : adobe:docid:indd:c2f9fd5c-240e-11da-9a9a-ebe0f0eac9ee Version ID : 1 Rendition Class : proof:pdf Rendition Of Document ID : adobe:docid:indd:c2f9fd5c-240e-11da-9a9a-ebe0f0eac9ee Rendition Of Version ID : 1 Rendition Of Rendition Class : default Format : application/pdf Title : SD-502_User_Manual_Ver_1.2.indd Tagged PDF : YesEXIF Metadata provided by EXIF.tools