Glynn Johnson 2020 Price Book (Effective 4/4/20) GJ PB7

User Manual: Glynn Johnson 2020 Glynn Johnson Price Book (Effective 4/4/20) Price Book

Open the PDF directly: View PDF .
Page Count: 32

Effective April 4, 2020 • Rev. 04/20

Price book 6

Click next for quick tips on

how to navigate Allegion

Price Books quicker!

Price Book 7

Effective April 4, 2020 • Rev. 04/20

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.

Administrative Offices

Allegion Administrative Office

11819 N. Pennsylvania St.

Carmel, IN 46032

allegion.com/us

Customer Care

Our Customer Care Representatives are available for questions or assistance.

You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for RSO) or

through the email addresses listed below:

Placing orders

You can place orders with Allegion via the fax number or email listed below:

Fax#:1-877-424-8494

Email: Order_Ives@allegion.com

Technical Product Support

Hinges, O/H Stops, Accessories

Accessories_TechProdSupport@allegion.com

PLEASE NOTE:

For authorized customers, please refer to Price Book for products

available in 24-hour or 5-days.

Sales Support

support@allegion.com

Request for Quote

Carolinas

(North Carolina, South Carolina, Virginia)

Carolinas.Quotes@allegion.com

Central

(Arkansas, Illinois, Iowa, Kansas, Missouri,

Nebraska, Oklahoma)

Central.Quotes@allegion.com

Chicago

(Illinois-Northern, Wisconsin)

Chicago.Quotes@allegion.com

Florida

Florida.Quotes@allegion.com

Great Lakes

(New York, Pennsylvania)

GreatLakes.Quotes@allegion.com

Metro New York

Metro.Quotes@allegion.com

Michigan

Michigan.Quotes@allegion.com

Mid Atlantic North

(New York, Pennsylvania)

Mid.Atlantics.north.quotes@allegion.com

Mid Atlantic South

(Delware, Maryland, New Jersey)

Mid.Atlantics.south.quotes@allegion.com

Midwest

(Indiana, Kentucky, Ohio, West Virginia)

Midwest.Quotes@allegion.com

Mountain States

(Colorado, Idaho, Montana, Nevada, Utah, Wyoming)

Mtn.States.Quotes@allegion.com

New England

(Connecticut, Main, Massachusetts, New Hampshire,

Rhode Island, Vermont)

NewEngland.Quotes@allegion.com

North Central

(Minnesota, North Dakota, South Dakota)

NorthCentral.Quotes@allegion.com

Northern California

NoCal.Quotes@allegion.com

Northwest

(Alaska, Oregon, Washington)

Northwest.Quotes@allegion.com

South

(Alabama, Georgia, Louisiana,

Mississippi, Tennessee)

South.Quotes@allegion.com

Southern California

(California-Southern, Hawaii)

SoCal.Quotes@allegion.com

Southwest

(Arizona, New Mexico)

Southwest.Quotes@allegion.com

Texas

Texas.Quotes@allegion.com

Price Book 7

Effective April 4, 2020 • Rev. 04/20 3

Table of Contents and Finish List

Finish List (Nearest US and BHMA Equivalents)

U.S. # BHMA # Description

US3 605 Brass, Bright

US4 606 Brass, Satin

US10 612 Bronze, Satin

US10B 613 Bronze, Dark Oxidized Satin, Oil Rubbed

US26 625 Chromium Plated, Bright

US26D 626 Chromium Plated, Satin

US28 628 Aluminum, Clear Anodized, Satin

US32 629 Stainless Steel, Bright

US32D 630 Stainless Steel, Satin

313AN 710 Aluminum, Dark Bronze Anodized

Glynn-

Johnson The following are powder-coat

Finish # BHMA # painted finishes:

SP10 691 Bronze

SP4 706 Brass

SP28 689 Aluminum

SPBLK 622 Black

SP313 695 Dark Bronze

652 652 Chrome-Like Coating on Steel

For a list of available BAA/ARRA compliant products please

contact your local RSO or sales representative to see the

Allegion BAA/ARRA catalog.

Markings Cartons: Markings (e.g., door locations, stock reference numbers) on individual product cartons will be provided with no charge.

Contents

Customer Service Telephone and Fax Numbers ..................................... 2

Finish List ........................................................................................ see below

Terms and Conditions ...............................................................................4-7

PRODUCTS

Overhead Holdes & Stops

Function & Option Guide ........................................................................8

How to Order .............................................................................................8

70/79 Series Surface................................................................................9

81 Series Surface ..................................................................................... 10

90 Series Surface .....................................................................................11

100 Series Concealed .............................................................................. 12

410 Series Concealed ..............................................................................13

450 Series Surface ..................................................................................14

510 Series Concealed ..............................................................................15

550 Series Concealed .............................................................................15

280 Series (Sensaguard).......................................................................16

Push/Pull (Hospital) Latches

Please see Schlage price book for latest pricing ..............................16

PARTS

Parts for 79 and 79 Series Overhead Holders & Stops .............. 17-20

Parts for 80/81 Series Overhead Holders & Stops .................... 20-21

Parts for 90 Series Overhead Holders & Stops ..........................22-23

Parts for 100 Series Overhead Holders & Stops ........................24-25

Parts for 410/450 Series Overhead Holders & Stops .............. 26-28

Parts for 280 Sensaguard Overhead Holder ....................................28

Warranty .....................................................................................31

4Price Book 7

Effective April 4, 2020 • Rev. 04/20

Allegion General Terms and Conditions of Sale and Service

1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by

which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order”

or “order” for the purposes of this Agreement include the term “request for quotation,” as

appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions

set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s

purchase order will in any way incorporate different or additional terms and conditions, all

of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF

CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S

ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS

AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any

reason.

2. ORDERS.

a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to

Company a purchase order. All such purchase orders must (i) be in a written format acceptable

to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account

number, invoice address, ship to address, shipping method, shipper’s letter of instruction for

international shipments, part number, pricing, and designated contact information, (v) include,

if applicable, any special configuration ID numbers, necessary programming information, special

factory instructions, and requested specifications regarding a particular finish, handing, design,

backset, or strike, (vi) reference any applicable pricing discounts under an ongoing buying

program or based on a written quote from Company, along with the applicable buying program

number or quotation number, and (vii) not combine buying program and quoted product on the

same order.

b. Minimum Orders. In the event the order value does not meet any required minimum

net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items

in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum

order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a

requirement for one order shall not constitute a waiver of the requirement for any future orders.

c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of

each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether

Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase

order within a reasonable time period, such failure to respond will be deemed a rejection of the

entire order. Orders that combine buying program and quoted product on the same order will be

routed back to your local RSO office in order to review subject purchase order.

d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order

changes and cancellations are available on the Allegion customer website, WHICH TERMS

ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided

herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the

scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii)

Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48

hours of Company’s order acknowledgment, all changes to an accepted purchase order will be

subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and

fabrication or raw material that Company incurred prior to the receipt of the Change Order from

Customer, or that may be required due to the Change Order; (iv) the requested change may

result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels

an order or portion of an order that includes Deliverables that have been manufactured and

prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer

cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged,

special, Custom or nonstandard items once they have been placed. All cancelled orders for a

Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom

orders will be subject to a cancellation charge of 100% of the acknowledged price.

e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as

separate stand-alone orders and must qualify for all terms of sale, including discounts, on an

individual basis.

f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast

Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested

by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped.

For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if

the order has not shipped and if the request is made to Company within 48 hours of Company’s

order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed

through Fast Track Customer Service.

g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without

penalty only if made within 48 hours of Company’s order acknowledgment, and provided that

the order has not shipped. Some exceptions do apply – please consult the factory. Changes

are not allowed on Rapid Program orders after the order has been entered and acknowledged.

After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject to

a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes

to orders acknowledged by Company that affect the delivery date will be deemed a new

order and will require acknowledgement by Company as provided in this Section. Additional

products, features, terms and conditions regarding the Rapid Program are available on the

Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY

REFERENCE.

3. PRICES, INVOICES AND PAYMENT.

a. Prices. The prices in Company’s Price Book are subject to change at any time, without

notice to Customer. Company may charge Customer additional amounts if Customer requests

special packing, marking, shipment, product modification, or engineering services. Oral prices

specified by Company are null and void. Quote numbers must be referenced on Customer’s

purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference

a quote number will receive buy program pricing or book net pricing. Quoted prices are for those

specific products quoted for a specified job, and are subject to the Price Book in effect at the time

Company receives the order.

b. Taxes. Prices do not include any present or future federal, state or local property, license,

privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result

from transactions or any services performed in connection therewith. Any taxes, charges,

or duties imposed by any governmental authority on the sale of Deliverables will be paid by

Customer, in addition to the selling price specified by Company. Credits for U.S. sales tax applied

to invoices will only be granted if valid exemption documentation is provided within 30-days

of the invoice date and a case is initiated by customer service. Exemption documentation

may be emailed to sales.tax.certificates@allegion.com, this e-mail address cannot be used to

request a credit for sales tax charged all such requests must be made with customer service.

All certificates sent to the e-mail address must include the following information: (1) Customer

account number(s); (2) Customer name; and (3) Allegion brand(s) the certificate should be

applied to.

c. Payment Terms. Company will deliver to Customer an invoice with each shipment of

Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice

date (subject to any early pay discounts that may be offered to Customer by Company in its

sole discretion). Customer will make all payments in United States dollars. Past due invoices

will be subject to a late payment service charge of 1.5% per month on any overdue unpaid

balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is

less. Customer shall reimburse Company for all costs of collection, including, without limitation,

reasonable attorneys' fees, for any overdue amount owed by Customer to Company, and such

collection costs shall also be subject to interest charges.

4. QUOTATIONS.

a. Project Quotations. Project or new construction quotes are restricted to the specific project

quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company

reserves the right to require proof of sale of Company products for any quoted project.

b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the

following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or

ii) Sale to a general contractor or installer for new construction. Stock quotations may not be

used for any project containing any Company no-substitution, specified products. Deliverables

purchased under Stock Quotations cannot be redistributed to other Customer branch locations

or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over

the counter to any walk in trade.

c. General. All quotes are subject to this Agreement, unless otherwise specified by Company,

and are subject to change at any time prior to Company’s acceptance of a purchase order

referencing the applicable quote number. Company, its representatives and employees reserve

the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a

price other than the standard list price, regardless of whether Company or its representatives

or employees have previously quoted discounted prices to the Customer on some or all of its

orders. Customer’s failure to comply with this Section 4 will be considered a material breach of

this Agreement, and will entitle Company to immediately terminate any purchase orders and/or

Customer’s ability to distribute Company’s products.

5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase

money security interest and lien on any and all of Customer’s rights, title and interest in each

Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable

Deliverable(s) is paid in full, including any late charges and costs of collection. Customer

authorizes Company to, and will assist Company in, taking all necessary steps to perfect and

maintain Company’s interest in such Deliverables.

6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its

purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set

forth in Company’s credit application, which Credit Terms Customer acknowledges are subject

to change by Company at any time. Company reserves the right to request payment in advance

of shipment or any order or to request adequate assurances for Customer’s payment of an order

and may withhold or stop shipment, without any liability to Company, until Customer submits

payment or adequate assurance of payment.

7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company

products in support of Company-written specifications and will maintain sufficient inventory

to adequately support End Users, installers, and/or general contractors’ needs. Company may

implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to

comply with such program(s) will be considered a material breach of this Agreement, and will

entitle Company to immediately terminate any purchase order and/or Customer’s ability to

distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient

knowledge of the industry and products competitive with Deliverables so as to be able to (a)

explain in detail to End Users, installers, and/or general contractors the differences between the

Deliverables and competing products, (b) ensure that an adequate number of trained, capable

and qualified technical personnel with sufficient knowledge of the Deliverables and who have

obtained all necessary licenses and permits are available to assist End Users, installers, and/or

general contractors, and (c) respond to such End Users, installers, and/or general contractors

with respect to the general operation and use of the Deliverables including, but not limited to,

(1) acting as a liaison between the End Users, installers and/or general contractors and Company

in matters requiring Company participation, (2) providing general product information and

configuration support on standard protocols and features, (3) collecting relevant technical

problem identification information, and (4) posting and distributing any warranty information

concerning the Products in accordance with Company’s instructions. Customer is responsible for

all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/

or general contractors, examples of which may include, but are not limited to, support activities

such as installation, initialization, software set-up, training, trouble-shooting, technical support

and field service. In the event Customer is unwilling or unable to perform said support activities,

Company reserves the right to recover from Customer any and all expenses incurred by Company

to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical

product training is recommended for Customer in order to fully service and support Deliverables

purchased from Company that are resold to End-Users, installers and/or general contractors.

8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase

order or other contract with Company, Company shall have the right, in addition to all other legal

remedies and without prejudice to any of its right hereunder, to defer further shipments under

that or any other purchase order until such default is corrected and to declare all outstanding

bills of Customer to be immediately due and payable.

9. INSPECTION AND DELIVERY.

a. Inspection. Customer will inspect all Deliverables immediately after receiving them.

Customer will be deemed to have accepted the Deliverables unless Customer notifies Company

in writing of any nonconformance within 10 days of delivery and provides Company written

evidence reasonably documenting that nonconformance. Inspection of Deliverables at

Company’s facility is not permitted.

b. Delivery. Delivery schedules for Deliverables are based upon current production capacities,

material or component availability, and inventory, and may be changed by Company as

conditions require. Delivery schedules for services are based upon Company’s prompt receipt

of, and prompt access to, Customer’s equipment and all information necessary to complete the

services. In no event will any delivery date be construed as falling within the meaning of “time is

of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on

the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall

be separately made when due. If any part of a delivery hereunder is not delivered by Company in

accordance with Customer’s purchase order, this Agreement shall not be affected thereby.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is

located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin,

Company’s factory”; and (ii) where the Customer is located outside of the United

States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In either

instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company’s

factory, provided, however, as set forth herein, Company shall retain a security interest in the

Deliverables until full payment has been made therefore, and Customer agrees, upon request,

to do all things and acts necessary to protect Company’s interest by adequately insuring

the Deliverables against loss or damage from any cause and to have Company named as

an additional insured. Customer will promptly provide Company with a copy of the relevant

certificate of insurance upon Company’s request.

11. SHIPPING.

a. Freight Charges. Company will ship all Deliverables in accordance with Company’s

freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping

Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.

b. Rush Charges. Expedited order options are available as set forth in Company’s Freight

Shipping Guidelines.

c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its

standard procedures for shipment, unless the parties agree, in writing, that Company will

comply with any special instructions provided by Customer. Special instructions may result in an

increased price.

d. International Shipments. For all international orders, a Shipper’s letter of instruction must

be submitted in writing with the order. Failure to do so will result in the order being rejected.

Complete adherence to this order requirement will be strictly enforced. Company will not be held

liable for any charges resulting from delays due to lack of complete required information being

supplied.

e. Once received by the Company, a purchase order cannot be combined with any other order

to increase average order size as it relates to Company’s Freight Shipping Guidelines. However,

for orders placed under Company’s FastTrack 24 Hour/5 Day Program (available for Schlage, Von

Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day Program (available for

Ives products); or ProExpress (available for specific product lines stated in the ProExpress price

book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von Duprin products), the applicable

brands or product categories may, subject to certain order requirements identified by Company,

be combined on a single order to increase average order size used in Company’s Freight Shipping

Guidelines.

12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for

prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding

Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date

of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of

Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for

loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the

responsibility of Customer, unless otherwise agreed by the parties.

13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision, and

accordingly, Company reserves the right to change, without notice, the design of, or the process

of manufacturing, the Deliverables covered by this Agreement.

14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any

manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not

to modify the design of any Deliverable for use with another product without the prior written

consent of Company.

15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables

that are correctly furnished by Company per the purchase order may not be returned unless

Customer receives written authorization from Company. If returns are authorized by Company, a

return merchandise authorization (“RMA”) number must be provided by Company. Deliverables

identified under such RMA must be returned to Company within 90 days of issuance of the RMA.

Such RMA number and any accompanying RMA documents, the original invoice number, and

a written explanation for the return must be included with the returned Deliverables in order

for Company to inspect and approve a credit for the return. For warranty returns, a credit in

the amount of the original purchase price will only be issued if, after Company’s receipt and

inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is

valid and approves the return. For non-warranty returns/convenience returns, in the event

Company approves such a return, in its sole discretion, the following shall apply: (a) the total

amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit

will be made to Customer’s account in the amount of the original purchase price less freight and

a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables

that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their

original condition as at the time of sale by Company to Customer, in their original packaging and

in Customer’s inventory less than 180 days from the date of shipment by the Company, and not

ordered as part of a master key solution may be considered by Company for return. Such credit

will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves

the return. The amount of final credit will be determined upon receipt at the factory and

following Company’s inspection and analysis of the condition of the returned material. Company

retains the right to deny credit to anyone for any reason.

16. CONFIDENTIAL INFORMATION.

a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the

Company except for the purpose of performing its obligations under this Agreement or exercising

the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of

the Company from disclosure and unauthorized use in the same manner that it protects its own

Confidential Information, but in no event shall such standard of care be less than reasonable

care. Customer may disclose Confidential Information of the Company only to its employees who

require such information for the Purpose and who are subject to confidentiality obligations at

least as protective as those set forth herein.

b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by

Company are proprietary and may not be disclosed or reused by Customer without the prior

written consent of Company; (b) Company assumes no obligation or liability for any advice given

by Company, the results obtained, or damages incurred as a result of such advice, and all such

advice is given and accepted at Customer’s risk.

c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon

the request of the Company, the Customer agrees to end all further use of, to immediately

return to the Company the original version of, and to delete or destroy all copies of, any and all

Confidential Information of the Company.

17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a)

use Company’s name in any form of publicity; or (b) use, create, register or market, directly or

indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or

names that are now or may hereafter be owned by Company, as part of Customer’s corporate

or business name, as part of an internet domain name, uniform resource locator (URL), or in any

way connected with Customer’s business, trade address or other designations. Upon termination

of this Agreement or upon the request of company for any reason, any use of Company’s

trademarks or names will be immediately discontinued.

18. LIMITED WARRANTY.

COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S

LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE

PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE

FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE,

WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY

WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S

WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE

NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO

CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL

AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT

OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY

IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE

DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE

IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR

NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO,

ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS

FOR A PARTICULAR PURPOSE.

a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A)

are not the proper size for the application; (B) are not installed in accordance with Company’s

published installation instructions; (C) are installed with improper or incorrect parts and/or

are used for purposes for which they are not designed or intended; (D) have been repaired or

altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse,

negligence or accident; (F) have been improperly stored, installed, maintained or operated;

(G) have been used in violation of written instructions provided by Company to Customer; (H)

have been subjected to improper temperature, humidity, or other environmental conditions,

or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited

Warranty do not apply to any defects or issues with the design or performance of equipment

or products not manufactured by Company, nor does it apply to any code compliance or permit

requirements for the assembly, installation, erection or construction of any goods. Company is

not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or

systems not manufactured by Company. Accessories or products furnished by the Company, but

manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the

Company and which can be passed to Customer.

b. Services. Company warrants that its services will be free from defects in material

and workmanship for a period of 12 months from the date of completion of the particular

items of service. Company’s sole obligation under this service warranty is limited to repair or

reperformance, at its option of the service, provided however, if repair or reperformance is either

impractical or impossible, the Company will refund to Customer that portion of the price paid to

Company for any defective service, provided written notice of the defect or nonconformance is

provided by Customer within 30 days of discovery of the nonconformance.

c. Notification. Customer agrees to immediately notify Company in writing if any claim is

made against Customer for any damages caused by any modules, parts, products, service or

other Deliverables which may be the direct result of any defect in the manufacture of such

aforementioned products. Customer agrees to cooperate with Company and its counsel in the

defense of such claim and Customer agrees not to settle such claim without Company’s written

consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense

as aforesaid, then Company shall be discharged from any obligations under this Section and shall

have no further liability to Customer.

d. Exceptions. The following costs and expenses are not covered by the provisions of these

limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other

manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to

Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this

warranty are not applicable to anything other than defects in Company’s material (products

only) or workmanship.

19. LIMITATION OF REMEDIES.

CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT

OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A)

SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR

OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE

PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT

WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE

DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY

(INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE

EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL

OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS

OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR

STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF

DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF

COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF,

CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM

THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR

ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify,

defend and hold Company, and its officers, directors, employees, customers, Affiliates,

suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any

and all damages, claims, losses, expenses, costs, obligations, liabilities, including without

limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees, suffered

directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss

to any person, or injury to any property (collectively, “Damages”), received or sustained by any

person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of

any representation or warranty made by Customer, its officers, directors, employees, affiliates,

users, agents, representatives or customers to Company or any third party, (ii) any failure by

6Price Book 7

Effective April 4, 2020 • Rev. 04/20

Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to

any third party, or (iii) any litigation, proceeding or claim by any third party relating in any

way to the obligations of Customer and/or the Deliverables sold by Company to Customer

hereunder. Customer shall not consummate any settlement of any indemnified claim without

the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will

continue in full force and effect notwithstanding the termination or expiration of any order

under this Agreement. In any claim against an Indemnitee by an employee of Customer or any

subcontractor or anyone directly or indirectly employed by any of them or anyone for whose

acts they may be liable, the indemnification obligations set forth in this Section shall not be

limited in any way by or for Customer or any subcontractor under any applicable worker’s

compensation act, disability or other employee benefit act, or insurance coverage. This provision

shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS

OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS,

(NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY

CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS,

SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST,

LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS,

LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF

OPERATION, OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES

OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES

WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED

TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty

to the Customer that the Deliverables shall not infringe any intellectual property rights including,

without limitations, claims arising from patent, copyright, trademark, trade secret, or other

intellectual property infringement. Customer agrees to hold Company harmless from and

defend the Company against any such claim of intellectual property infringement, including any

Damages resulting from that claim, the cost of complying with any preliminary or permanent

injunction, and all other costs of defense (including the attorneys’ fees and costs), in connection

with the foregoing.

c) To the extent that applicable law does not permit any limitations set out in this Agreement,

such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted

to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct.

The limitations of remedy and liability herein shall not be interpreted to affect Company’s

obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful

death asserted by persons who are not parties to or beneficiaries of this Agreement. Further,

the limitations of remedy and liability herein shall not be interpreted to limit Company’s or

Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint

tortfeasors in connection with a claim by a person who is not a party to this Agreement.

21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards

are tested and performed by third-party independent laboratories. Any field modification or

alteration of certified Deliverables will void certification and Company is not liable to Customer

to certify any modified or altered Deliverable.

22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS

AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1)

YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

23. CONSUMER PRODUCTS

WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-

MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE.

(A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG

AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY

TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS

LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE.

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR

EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE

TO STATE OR LOCATION TO LOCATION.

24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its

obligations hereunder will be excused to the extent that it is caused by an event or occurrence

beyond Company’s control such as, by way of example and not by way of limitation, acts of

God, acts by any governmental authority (whether valid or invalid), governmental laws and

regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters,

wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and

slowdowns) at Company’s facility, its source plant or their suppliers, inability to obtain power,

material, labor equipment, or transportation, or court injunction or order. The delivery date will

be extended for a time equal to that of the delay and the schedule for Company’s performance

will be deemed adjusted to that effect.

25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the

attachments, exhibits, webpages, or supplements specifically referenced and incorporated

herein, constitute the entire agreement between Company and Customer with respect to

the matters contained herein and supersede all previous communications, representations,

or agreements, either oral or written between Company and Customer. No agreement or

understanding varying or expanding this Agreement will be binding upon either party unless it is

in writing and signed by a duly authorized representative of each party hereto.

26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any

agreement, or any part of an agreement or the various documents (including, but not limited to,

electronic documents) between Company and Customer, unless the parties agree otherwise in

writing, the various components of the agreements shall be given the following precedence (in

descending order of precedence): a) any master agreement or long term agreement between

Company and Customer; b) any specific terms, conditions and/or warranties of the individual

products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase

order.

27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.

Customer shall furnish Company with statements evidencing Customer’s financial condition as

Company may, from time to time, reasonably request, and shall notify Company immediately of

any and all events that may have a material adverse effect on Customer’s business or financial

condition. If Company determines, in its sole discretion, that Customer’s financial condition or

creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights,

Company may without liability or penalty, take any of the following actions: (i) modify the

payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted

orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of

the above.

Company may immediately terminate an order from Customer by giving written notice to

Customer in the event of the happening of any of the following or any other comparable event:

(i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer;

(iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for

the benefit of creditors by the Customer, all of which will allow Company to demand reclamation

of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company

determines that Customer does not meet or no longer meets the credit requirements of

Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically

including, without limitation, those laws set forth in this Agreement.

In the event of termination in accordance with this section, Company will not be obligated to

accept any existing or additional orders from Customer and Company will be released from

its obligation to deliver under orders accepted prior to such termination. The rejection or

termination of any order by Company will not entitle Customer to any termination or severance

compensation, or to any payment in respect to any goodwill established by Customer, or render

Company liable for damages on account of the loss of prospective profits, or on account of any

loss, expenditure, investment or obligation incurred or made by Customer.

No action taken under this Section 27 by Company (nor any failure of Company to act under

this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s

obligations, including the obligation of Customer to make payments as required under this

Agreement. Upon termination of any order, all amounts owed by Customer to Company will

become immediately due and payable, whether or not otherwise then due or payable.

28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks

with respect to, and for collecting payment for, all Deliverables sold to third parties (including

End Users, installers, and/or general contractors) whether or not Customer has made full

payment to Company for such Deliverables. The inability of Customer to collect payment for any

Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable.

29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this

Agreement shall be governed by and construed according to the laws of the State of Indiana

(excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations

Convention on the International Sale of Goods. Any disputes or claims shall be instituted

and maintained in the courts of the State of Indiana. Customer consents to the exercise of

jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any

action arising from or relating to this Agreement. Customer agrees to pay for all expenses

(including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by

Company in enforcing the obligations of Customer under this Agreement.

30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document

creates an employment, partnership, joint venture, or agency relationship between Company and

Customer, including that of franchisee/franchisor. No party will have any power or authority to

enter into any commitment on behalf of or otherwise bind the any other party on any matter.

No employee of Customer will be deemed to be an employee of Company. If any provision of

this Agreement is deemed to create a franchise relationship or business opportunity between

the Parties, then Company may terminate any purchase order or this Agreement or the Parties

shall negotiate in good faith to modify this Agreement so as to effect the original intent of the

Parties as closely as possible in a mutually acceptable manner in order that the transactions

contemplated hereby are consummated as a reseller agreement and not a franchise or business

opportunity agreement.

31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts

which become payable to Company under this Agreement or otherwise. Company will not

accept responsibility for backcharges for the cost of material or labor by Customer or any third

party.

32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties

expressly agree to electronic transactions and acknowledge that documents they sign

electronically will bind them to the same extent as a paper signature. Customer represents

and warrants to Company that only employees authorized to bind Customer legally shall

electronically sign any document under this Agreement. Customer shall comply with any

method of electronic communication/payment processing specified by Company, including

electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases,

electronic signature, and electronic communication systems, including, without limitation, the

use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails, even

those containing a signature block of one of Company’s representatives, shall not constitute a

signed writing.

33. COMPLIANCE WITH APPLICABLE LAWS.

a. General. Company and Customer will comply with all applicable federal, state and

municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables,

including but not limited to full compliance with any applicable provisions of The Health

Insurance Portability and Accountability Act. Where the Customer is located outside the

United States, or where the customer intends to ship the product outside the United States,

the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S.

Electronic Export Information, as applicable.

b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and

regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in

any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations;

(iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or

authorize the payment of, either directly or indirectly, anything of value (including but not limited

to cash, gifts and entertainment) to (a) any government official or employee of any government;

(b) any official or employee of any department, agency, or instrumentality of a government;

family member of such officials or employees; (e) any political party, party official, or political

candidate; or (f) any other persons, owners, officers, directors, employees and agents of any

corporation or entity; to improperly or illegally assist in obtaining or retaining business (including

but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or

Price Book 7

Effective April 4, 2020 • Rev. 04/20

to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting

or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge

of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the

Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE.

c. The Customer shall indemnify and hold the Company harmless from any claim, demand,

expense or cost arising from any breach of this Article.

d. The Customer shall permit the Company to conduct an audit or review of the Customer’s

financial books and records and business operations at such other times that the Company

considers it necessary to confirm compliance with this provision. Such audit may be conducted

by representatives of the Company or, at the Company’s sole discretion, by a certified public

accounting firm selected by the Company. The Customer shall cooperate with any inquiries from

the Company’s Ethics & Compliance Group.

e. A violation of this provision constitutes a material breach of this Agreement and the

Company may terminate any purchase order or this Agreement immediately, with no opportunity

to cure, in accordance with Section 27 of this Agreement.

f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible

for obtaining or maintaining any permits for the performance of services or the verification

or compliance with any code requirements relative to the performance of services, (ii) to the

extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S.

Government, Company’s obligations under this Agreement are conditioned upon the grant of

such approval and upon compliance by Customer with any restrictions imposed by the U.S.

Government in connection with such approval, and (iii) in the event the Deliverables are to

be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or

governmental indemnity protecting Company against liability. The Customer hereby releases and

agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited

to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in

whole or in part by Company or its suppliers.

g. No Inducements. Each party represents to each other that neither it nor any person

acting on its behalf has, in contravention of any applicable law, given or offered to give or will

give or offer to give, any sum of money or other material consideration to any person, directly

or indirectly, as an inducement to obtain business hereunder or to influence the granting of

licenses or other governmental permissions to enter into this Agreement or perform obligations

hereunder.

h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with

Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through

60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and

applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS

ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by

Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a),

60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the

L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496.

i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business

Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants

to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully

perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content

and Marks for use within the scope of this Agreement, including the licenses granted herein; and

are applicable to its performance under this Agreement, including obtaining all such approvals

and/or permits as may be required hereunder.

35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based

on the representations contained herein for its own purposes and not for the benefit of any third

party.

36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this

Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail,

e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is

intended, at the addresses set forth in this Agreement. Either party may change its address for

notice by giving written notice to the other party. Any notice or other communication shall be

deemed given no later than the date actually received. Notice by courier, express mail, certified

mail, or registered mail shall be deemed given on the date it is officially recorded as delivered

and, in the absence of such record of delivery, it shall be rebuttably presumed to have been

delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible

confirmation of receipt from addressee.

37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent

of Company. Company may assign its rights and delegate its duties under this Agreement,

without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spin-

off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or

business that are related to this Agreement. The rights and duties in this Agreement shall bind

and inure to the benefit of any such assignee.

38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or

unenforceable under any statute, regulation, ordinance, executive order, or other rule of law,

that provision will be deemed severed to the extent necessary to comply with such statute,

regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties

will negotiate in good faith to arrive at an alternative arrangement approximating the original

business objective of the parties. The remaining terms and conditions of this Agreement will

remain in effect.

39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by

the other party of any provision of this Agreement will in no way affect the right to require

such performance at any time thereafter, nor will the waiver of either party of a breach of any

provision of this Agreement constitute a waiver of any succeeding breach of the same or any

other provision.

40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal

representative of the other party. Neither party is authorized to create any obligation on behalf

of the other party including, but not limited to, the obligation for payment of any service or

warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are

cumulative and additional to any other rights and remedies provided at law or equity; (c) The

official text of this Agreement is in the English language. If this Agreement is translated into

another language, the English text will govern any question with respect to interpretation;

(d) The headings in this Agreement are for convenience of reference only and do not affect the

meaning of this Agreement in any manner.

DEFINITIONS.

Capitalized terms have the meanings set forth in this Section, or in the Section in which they first

appear in this Agreement.

“Agreement” means these Allegion Terms and Conditions of Sale and Service, together with

any applicable Country Supplement or Region Supplement provided by Company, and all of the

documents referenced herein or therein.

“Affiliate” means any Person that directly or indirectly, through one or more intermediaries,

controls, is controlled by, or is under common control with, the Company. The term “control”

(including the terms “controlled by” and “under common control with”) means the possession,

directly or indirectly, of the power to direct or cause the direction of the management and

policies of a Person, whether through the ownership of voting securities, by contract or otherwise.

“Business Day” means any day except Saturday, Sunday or any other day on which commercial

banks located in the United States are authorized or required by Law to be closed for business.

“Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling

products that are part of the Allegion product portfolio. Schlage Lock Company and/or its

subsidiary or affiliates will be severally but not jointly liable under the Agreement.

“Company Marks” refers to the Marks of Company.

“Confidential Information” shall mean any and all information provided by either party to

the other party pertaining to the disclosing party’s business. Confidential Information shall

include, but not be limited to, any bitting lists, formulae for products, manufacturing processes,

production techniques, packaging processes, methods, research materials, ideas, marketing

plans and related materials, quality standards, test results and data, apparatus, engineering

drawings, contract documents, computer software, hardware, or firmware, business activities

information such as financial information, reports, projections, books and records, customer and

supplier information, and operations, customer and supplier lists and data, specifications, know

how, and other Proprietary Information or Trade Secrets (as defined herein) that either party

may furnish to the other party. Confidential Information shall not include information that:

(a) is or becomes publicly known if such public knowledge or disclosure is not the result of any

act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already

known to the Receiving Party without utilizing the Confidential Information; (c) is information

disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge,

after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is

independently developed by the Receiving Party without the use of Confidential Information.

The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach.

Confidential Information may be furnished in any tangible or intangible form including, but not

limited to, writings, drawings, computer and other electronic media, logic diagrams, component

specifications, graphs, prototypes, samples, or verbal communications and regardless of

whether such information is marked or designated as “confidential.” For the avoidance of

doubt, all information, knowledge or data disclosed by Company to Customer, regardless of

whether disclosed in written, tangible, oral, visual or other form, including, without limitation,

sample products, equipment, software, or other objects or material, provided by Company to

Customer, and all information, knowledge or data which was obtained by Customer from visits

to Company’s facilities, shall be considered “Confidential Information” under this Agreement.

“Content” means all information (including without limitation any text, music, sound,

photographs, video, graphics, data or software), in any medium, on a particular Company Web

page or Website or in Marketing Materials.

“Customer” means the purchaser of Deliverables from Company.

“Deliverables” means any good or service or both purchased by Customer from Company under

these General Terms and Conditions of Sale and Service.

“End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i) its

own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution or

(ii) incorporation into its own products and (b) is an individual or entity, other than any federal,

state or local agency, office or division.

“IP” means all intellectual property and industrial property rights comprising or relating to/

of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not

Trademarks, registered by any authorized private registrar or Governmental Authority, web

addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and

design registrations, whether or not copyrightable, including copyrights and copyrightable

works, software and firmware, application programming interfaces, architecture, files, records,

schematics, data, data files, and databases and other specifications and documentation; (e)

Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights,

interests and protections that are associated with, equivalent or similar to, or required for the

exercise of, any of the foregoing, however arising, in each case whether registered or unregistered

and including all registrations and applications for, and renewals or extensions of, such rights or

forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world.

“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call

scripts or other material, whether in printed format, audio or audiovisual format, or in any other

format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks.

“Marks” means collectively the domain names, trademarks, trade names, service marks,

trade dress, logos, and the like used or provided by either party for use in connection with this

Agreement.

“Patents” means all patents (including all reissues, divisionals, provisionals, continuations and

continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent

applications, and other patent rights and any other Governmental Authority-issued indicia of

invention ownership (including inventor’s certificates, petty patents and patent utility models).

“Person” means a person or entity.

“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being

purchased by Customer.

“Trade Secrets” means and includes business or technical information of either party, including

processes, formulas, devices, techniques, compilations and other material that a party attempts

to maintain in secret and that derive commercial value for such party from not being generally

known to the public or readily ascertainable through independent development or reverse

engineering.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Prices subject to change without notice.

Overhead Holders & Stops

Function & Option Guide

Series 70, 79, 81, 90, 100, 410, 450, 510 & 550

Designation Description Available on these series

Holder & Stop Functions 70 79 81 90 100 410 450 510 550

H suffix HOLD OPEN & STOP — The hold open function may be

turned on or off on all models except the 410’s and 450’s.

The tension on the hold open is adjustable so that one

can adjust the amount of force required to pull the door

out of hold open on all except the 81 Series. All holders

include the STOP function.

333333333

F suffix FRICTION HOLD OPEN — Multi-point hold open

mechanism. Tension on hold open is adjustable. 333333

HP suffix NTERNAL HOLD OPEN & STOP — The hold open

mechanism is contained completely within the channel.

The hold open is automatic and is not field selectable or

adjustable.

Stop Only Functions

S suffix STOP-ONLY — A shock-absorbing spring stops the door. 333333333

SE suffix STOP-ONLY with Single Point Hold-Open ELECTRONIC

Closer — The shock-absorbing spring ground in the

standard Stop-Only holders is replaced by an

adjustable fixed stop block.

3333

Options

ADJ suffix ADJUSTABLE JAMB BRACKET — This option provides

for manual setting of the degree of opening, from 85 to

110 degrees. The standard jamb bracket is replaced by a

12˝ track.

CJ suffix CLOSER JAMB BRACKET — For use with LCN 5030

Closers. Specify Handing (LH or RH). 3

J suffix ANGLE JAMB BRACKET — An angle jamb bracket is

provided to convert standard unit to hinge side or flush

transom mounting. 3 3 3 3 3 3 3

Door Thickness

Surface Overheads are furnished for standard 1-3/4˝ thick doors.

For doors over 1-3/4˝ up to 2-1/4˝, please specify when ordering - no additional charge.

Other thicknesses available, please specify when ordering - additional charge.

Overhead Holders and Stops – How to Order

Example: 70 2 H - US26D - J

Overhead series (70, 79, 81, 90, 10, 41, 45)

Size (1, 2, 3, 4, 5, or 6)*

Function (H, F, HP, S or SE) For description of functions, refer to chart above.*

Finish (US3, US4, US10, US10B, US26, US26D, US32, US32D, 652, SP4, SP10,

SP28, SP313, SPBLK)

Option (ADJ, CJ, J, SHIM, SNB, SOC)*

*Please refer to individual Overhead Series price book pages for availability of finish, size, function and options.

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Optional Finishes –

RAL Powder-Coat Finish (For information on available colors, consult factory)

Item Description List Add

1 - 10 Units List Add to Stainless Steel (US32D) price $107

11 - 25 Units List Add to Stainless Steel (US32D) price 74

26 or more Units List Add to Stainless Steel (US32D) price 54

Options and Accessories

List Add

US32D

US10,

US26D

US3, US4,

US10B, US15,

US26,

643E/716

SP28,

SP4, SP10,

SP313,

BLK

Item Description

J sufx (70 series)* Angle Jamb Bracket - $62 $62 $62

J sufx (79 series)* Angle Jamb Bracket - 138 138 138

SNB-1 sufx (70) Sex bolt (set) --- Doors up to 2˝ thick -37 37 37

SNB-2 sufx (70) Sex bolt (set) --- Doors up to 3˝ thick - 46 46 46

SNB-1 sufx (79) Sex bolt (set) --- Doors up to 2˝ thick -74 74 74

SNB-2 sufx (79) Sex bolt (set) --- Doors up to 3˝ thick - 85 85 85

SOC sufx (70) Pin-in-Socket Security Screws 36 - - -

SOC sufx (79) Pin-in-Socket Security Screws 33 - - -

AJK 70* 70 Series Angle Jamb Bracket Kit - 82 82 82

AJK 79* 79 Series Angle Jamb Bracket Kit - 183 183 183

For Door thicknesses Over 3" - 96 96 96

* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom.

Conversion Kits are sold separately in the Parts Price List.

Overhead Holders & Stops

70 Series Heavy-Duty

79 Series Extra Heavy-Duty

Surface Overhead Holders & Stops

Item* Description

US10,

US26D

US3, US4,

US10B, US15,

US26, 643E/716

SP28,

SP4, SP10,

SP313,

BLK

702H 70 Series, Size 2, Hold-Open $259 $277 $245

703H 70 Series, Size 3, Hold-Open 259 277 245

704H 70 Series, Size 4, Hold-Open 259** 277 245

705H 70 Series, Size 5, Hold-Open 259 277 245

706H 70 Series, Size 6, Hold-Open 259 277 245

702S 70 Series, Size 2, Stop-Only 259 277 245

703S 70 Series, Size 3, Stop-Only 259 277 245

704S 70 Series, Size 4, Stop-Only 259** 277 245

705S 70 Series, Size 5, Stop-Only 259 277 245

706S 70 Series, Size 6, Stop-Only 259 277 245

792H 79 Series, Size 2, Hold-Open 663 671 493

793H 79 Series, Size 3, Hold-Open 663 671 493

794H 79 Series, Size 4, Hold-Open 663 671 493

795H 79 Series, Size 5, Hold-Open 663 671 493

796H 79 Series, Size 6, Hold-Open 663 671 493

792S 79 Series, Size 2, Stop-Only 663 671 493

793S 79 Series, Size 3, Stop-Only 663 671 493

794S 79 Series, Size 4, Stop-Only 663 671 493

795S 79 Series, Size 5, Stop-Only 663 671 493

796S 79 Series, Size 6, Stop-Only 663 671 493

* For help in determining the size, please see chart below.

** Note: 704H US26D and 704S US26D available in Fast Track and ProXpress

70 & 79 Series Sizing Chart –

This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details,

consult Glynn-Johnson’s Technical Support.

Opening size with doors hung with:

Series & Size Butts / Offset Pivots Center Pivots

702 & 792 23-1/16˝-27˝ 27-1/16˝-33˝

703 & 793 27-1/16˝-33˝ 33-1/16˝-39˝

704 & 794 33-1/16˝-39˝ 39-1/16˝-45˝

705 & 795 39-1/16˝-45˝ 45-1/16˝-51˝

706 & 796 45-1/16˝-54˝ 51-1/16˝-59˝

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Overhead Holders & Stops

Options and Accessories

Item* Description

List Add

All Finishes

J sufx Angle Jamb Bracket $49

SHIM-1 sufx 1/4˝ Shim for Blade Stop Mounting 26

SHIM-2 sufx 1/2˝ Shim for Blade Stop Mounting 34

SHIM-3 sufx 3/4˝ Shim for Blade Stop Mounting 52

SOC sufx Pin-in-Socket Security Screws 29

AJK 81* Angle Jamb Bracket Kit 67

SHK 81-1 1/4˝ Shim Kit for Blade Stop Mounting 26

SHK 81-2 1/2˝ Shim Kit for Blade Stop Mounting 34

SHK 81-3 3/4˝ Shim Kit for Blade Stop Mounting 52

For Door Thickness over 2 1/4˝

* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting (stop-only models).

Conversion Kits are sold separately in the Parts Price List.

81 Series Heavy-Duty Surface

Overhead Holders & Stops

(Formerly 80 Series)

Item* Description US32D

US4, US10,

US10B, US15,

643E/716,

BLK

US3, US26,

US32 652

813H 81 Series, Size 3, Hold-Open $361 $412 $430 $308

814H 81 Series, Size 4, Hold-Open 361 412 430 308

815H 81 Series, Size 5, Hold-Open 361 412 430 308

816H 81 Series, Size 6, Hold-Open 361 412 430 308

813S 81 Series, Size 3, Stop-Only 315 362 381 264

814S 81 Series, Size 4, Stop-Only 315 362 381 264

815S 81 Series, Size 5, Stop-Only 315 362 381 264

816S 81 Series, Size 6, Stop-Only 315 362 381 264

* For help in determining size, please see chart below.

81 Series Sizing Chart –

This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details,

consult Glynn-Johnson’s Technical Support.

Opening size with doors hung with:

Series & Size Butts / Offset Pivots Center Pivots

813 27-1/16"-33" 33-1/16"-39"

814 33-1/16"-39" 39-1/16"-45"

815 39-1/16"-45" 45-1/16"-51"

816 45-1/16"-54" 51-1/16"-59"

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Overhead Holders & Stops

90 Series Heavy-Duty Surface

Overhead Holders & Stops

Item* Description US32D

US4,

US10

US3,

US26,

US32

US10B,

US15,

643E/716 652

SP28,

SP4,

SP10,

SP313,

BLK

902H 90 Series, Size 2, Hold-Open $355 $377 $413 $398 $262 $220

903H 90 Series, Size 3, Hold-Open 355 377 413 398 262 220

904H 90 Series, Size 4, Hold-Open 355 377 413 398 262 220

905H 90 Series, Size 5, Hold-Open 355 377 413 398 262 220

906H 90 Series, Size 6, Hold-Open 355 377 413 398 262 220

902S 90 Series, Size 2, Stop-Only 355 377 413 398 262 220

903S 90 Series, Size 3, Stop-Only 355 377 413 398 262 220

904S 90 Series, Size 4, Stop-Only 355 377 413 398 262 220

905S 90 Series, Size 5, Stop-Only 355 377 413 398 262 220

906S 90 Series, Size 6, Stop-Only 355 377 413 398 262 220

902F 90 Series, Size 2, Friction Hold-Open 355 377 413 398 262 220

903F 90 Series, Size 3, Friction Hold-Open 355 377 413 398 262 220

904F 90 Series, Size 4, Friction Hold-Open 355 377 413 398 262 220

905F 90 Series, Size 5, Friction Hold-Open 355 377 413 398 262 220

906F 90 Series, Size 6, Friction Hold-Open 355 377 413 398 262 220

* For help in determining size, please see chart below.

Options and Accessories

Item* Description

List Add

All Finishes

SE sufx Stop-Only function for use with Single Point Hold-Open Electronic Closers $50

J sufx* Angle Jamb Bracket 49

SHIM-1 sufx 1/4˝ Shim for Blade Stop Mounting 32

SHIM-2 sufx 1/2˝ Shim for Blade Stop Mounting 41

SHIM-3 sufx 3/4˝ Shim for Blade Stop Mounting 65

SOC sufx Pin-in-Socket Security Screws 29

AJK90* Angle Jamb Bracket Kit 67**

SHK 90-1 1/4˝ Shim Kit for Blade Stop Mounting 32

SHK 90-2 1/2˝ Shim Kit for Blade Stop Mounting 41

SHK 90-3 3/4˝ Shim Kit for Blade Stop Mounting 65

For Door thickness over 2 1/4˝

* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting.

** Note: AJK90 US26D available in Fast Track and ProXpress

Conversion Kits are sold separately in the Parts Price List.

90 Series Sizing Chart –

This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult

Glynn-Johnson’s Technical Support.

Opening size with doors hung with:

Series & Size Butts / Offset Pivots Center Pivots

902 23-1/16"-27" 27-1/16"-33"

903 27-1/16"-33" 33-1/16"-39"

904 33-1/16"-39" 39-1/16"-45"

905 39-1/16"-45" 45-1/16"-51"

906 45-1/16"-54" 51-1/16"-59"

Optional Finishes –

RAL Powder-Coat Finish (For information on available colors, consult factory)

Item Description List Add

1 - 10 Units List Add to Stainless Steel (US32D) price $107

11 - 25 Units List Add to Stainless Steel (US32D) price 74

26 or more Units List Add to Stainless Steel (US32D) price 54

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 6

Effective May 4, 2019 • Rev. 05/19

Overhead Holders & Stops

100 Series Heavy-Duty

Concealed Overhead Holders & Stops

Item* Description US32D US10

US4,

US10B,

US15,

643E/716

US3,

US26,

US32

SP28,

SP4,

SP10,

SP313,

BLK

101H, 102H 100 Series, Size 1 or 2, Hold-Open $345 $359 $363 $384 $343

103H, 104H 100 Series, Size 3 or 4, Hold-Open 345** 359 363 384 343

105H, 106H 100 Series, Size 5 or 6, Hold-Open 345** 359 363 384 343

101S, 102S 100 Series, Size 1 or 2, Stop-Only 345** 359 363 384 343

103S, 104S 100 Series, Size 3 or 4, Stop-Only 345** 359 363** 384 343

105S, 106S 100 Series, Size 5 or 6, Stop-Only 345** 359 363 384 343

101F, 102F 100 Series, Size 1 or 2, Friction Hold-Open 345 359 363 384 343

103F, 104F 100 Series, Size 3 or 4, Friction Hold-Open 345 359 363 384 343

105F, 106F 100 Series, Size 5 or 6, Friction Hold-Open 345 359 363 384 343

101HP, 102HP 100 Series, Size 1 or 2, Internal Hold-Open 345 359 363 384 343

103HP, 104HP 100 Series, Size 3 or 4, Internal Hold-Open 345 359 363 384 343

105HP, 106HP 100 Series, Size 5 or 6, Internal Hold-Open 345 359 363 384 343

* For help in determining size, please see chart below.

**Note: 104H US32D and 105H US32D available in Fast Track and ProXpress

102S US32D, 103S US32D, 104S US32D, 104S US32D ADJ, and 104S US10B available in Fast Track and ProXpress

100 Series Sizing Chart –

This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult

Glynn-Johnson’s Technical Support.

Opening size with doors hung with:

Series & Size Butts / Offset Pivots Center Pivots

101 18"-23" Not Available

102 23-1/16"-27" Not Available

103 27-1/16"-33" 33-1/16"-39"

104 33-1/16"-39" 39-1/16"-45"

105 39-1/16"-45" 45-1/16"-51"

106 45-1/16"-54" 51-1/16"-59"

Optional Finishes –

RAL Powder-Coat Finish (For information on available colors, consult factory).

Item Description List Add

1 - 10 Units List Add to Stainless Steel (US32D) price $107

11 - 25 Units List Add to Stainless Steel (US32D) price 74

26 or more Units List Add to Stainless Steel (US32D) price 54

Options and Accessories List Add

Item Description US32D US10

US4,

US10B,

US15,

643E/716

US3,

US26,

US32

SP28,

SP4,

SP10,

SP313,

BLK

SE sufx Stop-Only function for use with Single Point

Hold-Open Electronic Closers. $30 $30 $30 $30 $30

ADJ sufx

Adjustable Jamb Bracket Available on models

103-106 (Allows for eld adjustment of Hold-

Open 85-110 degrees)

69 69 69 69 69

CJ sufx Special Jamb Bracket for use with LCN 5030

Closers. Specify Handing. 56 56 56 56 56

SOC sufx Pin-in-Socket Security Screws 12 12 12 12 12

SOC sufx (ADJ) Pin-in-Socket Security Screws 12 12 12 12 12

Conversion Kits sold separately See Parts section.

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 6

Effective May 4, 2019 • Rev. 05/19

Overhead Holders & Stops

410 Series Medium-Duty Concealed

Overhead Holders & Stops

Item* Description US32D

US4,

US10

US3,

US32 US10B 652

SP28,

SP4,

SP10,

SP313,

SPBLK

411H 410 Series, Size 1, Hold-Open $128 $141 $151 $142 $108 $99

412H 410 Series, Size 2, Hold-Open 128 141 151 142 108 99

413H 410 Series, Size 3, Hold-Open 128 141 151 142 108 99

414H 410 Series, Size 4, Hold-Open 128 141 151 142 108 99

415H 410 Series, Size 5, Hold-Open 128 141 151 142 108 99

411S 410 Series, Size 1, Stop-Only 128 141 151 142 108 99

412S 410 Series, Size 2, Stop-Only 128 141 151 142 108 99

413S 410 Series, Size 3, Stop-Only 128 141 151 142 108 99

414S 410 Series, Size 4, Stop-Only 128 141 151 142 108 99

415S 410 Series, Size 5, Stop-Only 128 141 151 142 108 99

411F 410 Series, Size 1, Friction Hold-Open 128 141 151 142 108 99

412F 410 Series, Size 2, Friction Hold-Open 128 141 151 142 108 99

413F 410 Series, Size 3, Friction Hold-Open 128 141 151 142 108 99

414F 410 Series, Size 4, Friction Hold-Open 128 141 151 142 108 99

415F 410 Series, Size 5, Friction Hold-Open 128 141 151 142 108 99

* For help in determining size, please see chart below.

Options and Accessories

Item Description

List Add

All Finishes

SE sufx Stop-Only function for use with Single Point Hold-Open Electronic Closers $25

SOC sufx Pin-in-Socket Security Screws 20

Conversion Kits sold separately See Parts section.

410 Series Sizing Chart –

This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult

Glynn-Johnson’s Technical Support.

Series & Size Butts / Offset Pivots Center Pivots

411 18"-23" Not Available

412 23-1/16"-27" Not Available

413 27-1/16"-33" 33-1/16"-39"

414 33-1/16"-39" 39-1/16"-45"

415 39-1/16"-45" 45-1/16"-51"

Optional Finishes –

RAL Powder-Coat Finish (For information on available colors, consult factory)

Item Description List Add

1 - 10 Units List Add to Stainless Steel (US32D) price $107

11 - 25 Units List Add to Stainless Steel (US32D) price 74

26 or more Units List Add to Stainless Steel (US32D) price 54

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Overhead Holders & Stops

450 Series Medium-Duty Surface

Overhead Holders & Stops

Item* Description US32D

US4,

US10

US3,

US32 US10B 652

SP28,

SP4,

SP10,

SP313,

SPBLK

451H 450 Series, Size 1, Hold-Open $158 $170 $192 $174 $121 $104

452H 450 Series, Size 2, Hold-Open 158 170 192 174 121 104

453H 450 Series, Size 3, Hold-Open 158 170 192 174 121 104

454H 450 Series, Size 4, Hold-Open 158 170 192 174 121 104

455H 450 Series, Size 5, Hold-Open 158 170 192 174 121 104

451S 450 Series, Size 1, Stop-Only 158 170 192 174 121 104

452S 450 Series, Size 2, Stop-Only 158 170 192 174 121 104

453S 450 Series, Size 3, Stop-Only 158 170 192 174 121 104

454S 450 Series, Size 4, Stop-Only 158 170 192 174** 121 104**

455S 450 Series, Size 5, Stop-Only 158 170 192 174 121 104

451F 450 Series, Size 1, Friction Hold-Open 158 170 192 174 121 104

452F 450 Series, Size 2, Friction Hold-Open 158 170 192 174 121 104

453F 450 Series, Size 3, Friction Hold-Open 158 170 192 174 121 104

454F 450 Series, Size 4, Friction Hold-Open 158 170 192 174 121 104

455F 450 Series, Size 5, Friction Hold-Open 158 170 192 174 121 104

* For help in determining size, please see chart below.

**Note: 454S SP28 available in Fast Track and ProXpress

Options and Accessories

Item Description

List Add

All Finishes

SE sufx Stop-Only function for use with Single Point Hold-Open Electronic Closers $25

J sufx* Angle Jamb Bracket 42

SHIM-1 sufx 3/16˝ Shim Kit for Blade Stop Mounting 20

SHIM-2 sufx 3/8˝ Shim Kit for Blade Stop Mounting 31

SHIM-3 sufx 9/16˝ Shim Kit for Blade Stop Mounting 39

SOC sufx Pin-in-Socket Security Screws 29

1-3/8˝ Dr Thickness Mounting Package for 1-3/8˝ Door 41

2-1/4˝ Dr Thickness Mounting Package for up to 2-1/4˝ Door 25

For Door Thickness over 2 1/4" 99

AJK 450* 450 Series Angle Jamb Bracket Kit 60

SHK 450-1 3/16˝ Shim Kit for Blade Stop Mounting 20

SHK 450-2 3/8˝ Shim Kit for Blade Stop Mounting 31

SHK 450-3 9/16˝ Shim Kit for Blade Stop Mounting 39

* Note: Angle Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting.

Conversion Kits sold separately See Parts section.

450 Series Sizing Chart –

This chart illustrates the most common types of hinging & door opening sizes. For unusual door or hinge details, consult

Glynn-Johnson’s Technical Support.

Series & Size Butts / Offset Pivots Center Pivots

451 18˝-23˝23-1/16˝-27˝

452 23-1/16˝-27˝27-1/16˝-33˝

453 27-1/16˝-33˝33-1/16˝-39˝

454 33-1/16˝-39˝39-1/16˝-45˝

455 39-1/16˝-45˝45-1/16˝-51˝

Optional Finishes –

RAL Powder-Coat Finish (For information on available colors, consult factory)

Item Description List Add

1 - 10 Units List Add to Stainless Steel (US32D) price $107

11 - 25 Units List Add to Stainless Steel (US32D) price 74

26 or more Units List Add to Stainless Steel (US32D) price 54

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

510 Series Heavy Duty Concealed

Adjustable Overhead Holder & Stop

Item* Description

Order

Multiple

630

(US32D)

652

(US26D)

510S-H 510 Series, Ajustable Arm, Stop and Hold 1$323 $235

6 1,884 1,368

* One size works for door widths 24" - 48"

550 Series Heavy Duty Surface

Adjustable Overhead Holder & Stop

Item* Description

Order

Multiple

630

(US32D)

652

(US26D)

550S-H 550 Series, Ajustable Arm, Stop and Hold 1$334 $246

6 1,944 1,434

* One size works for door widths 24" - 48"

Accessories

Item* Description

List Add

All Finishes

AJK500* Angle Jamb Bracket Kit $55

SHK 550-1 1/4" Shim Kit for Blade Stop Mounting 31

SHK 550-2 1/2" Shim Kit for Blade Stop Mounting 39

SHK 550-3 3/4" Shim Kit for Blade Stop Mounting 62

* Note Angel Jamb Brackets affix to Standard Jamb Brackets to allow for flush transom or hinge side mounting.

Conversion Kits sold separately See Parts section.

Accessories

Conversion Kits sold separately See Parts section.

Overhead Holders & Stops

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Sensaguard

280 Series Sensaguard

Stand Alone Holder/Release Smoke Detector

Item Description US28 313AN

280 Sensaguard Stand Alone Holder/Release Smoke Detector

• Battery Operated Hold-Open/Release

• Built-in Smoke Detector

• Non-Handed -- Mounts on Push or Pull Side of Door

• Fits Doors 30˝ and Larger

$1,167 $1,211

Options

Item Description All Finishes

SOC suffix Pin-in-Socket Security Screws $28

Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20 17

HOW TO USE THIS PARTS PRICE LIST

To find a part number and its list price:

n

First, start with the product where the part is used.

n

Next, scan the descriptions shown below the product.

n

Once you find the description, determine the finish, if applicable.

n

From there, note the part number to use when ordering. If directed, refer to the HOW TO ORDER guide used

to order most arm assemblies, channel assemblies, and handle assemblies.

If you are unable to find a part, or if you already know the part number but do not know where it is being used and

you need its list price, please contact Glynn-Johnson Customer Service using the information provided on the inside

front cover.

Parts

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

70 Series

Description Finish Part No. List Price Each

70 Door Bracket & Pin US3 OHPART.10001 $78.00

70 Door Bracket & Pin US4 OHPART.10002 78.00

70 Door Bracket & Pin US10 OHPART.10003 65.00

70 Door Bracket & Pin US10B OHPART.10004 78.00

70 Door Bracket & Pin US26 OHPART.10005 78.00

70 Door Bracket & Pin US26D OHPART.10006 58.00

70 Door Bracket & Pin SP4 OHPART.10007 38.00

70 Door Bracket & Pin SP10 OHPART.10008 38.00

70 Door Bracket & Pin SP313 OHPART.10009 38.00

70 Door Bracket & Pin SP28 OHPART.10010 38.00

70 Door Bracket & Pin SPBLK OHPART.10011 38.00

70 Jamb Bracket US3 OHPART.10012 114.00

70 Jamb Bracket US4 OHPART.10013 114.00

70 Jamb Bracket US10 OHPART.10014 107.00

70 Jamb Bracket US10B OHPART.10015 114.00

70 Jamb Bracket US26 OHPART.10016 114.00

70 Jamb Bracket US26D OHPART.10017 107.00

70 Jamb Bracket SP4 OHPART.10018 102.00

70 Jamb Bracket SP10 OHPART.10019 102.00

70 Jamb Bracket SP313 OHPART.10020 102.00

70 Jamb Bracket SP28 OHPART.10021 102.00

70 Jamb Bracket SPBLK OHPART.10022 102.00

70 Series Angle Jamb Bracket Kit US3 AJK.1001 75.00

70 Series Angle Jamb Bracket Kit US4 AJK.1002 75.00

70 Series Angle Jamb Bracket Kit US10 AJK.1003 75.00

70 Series Angle Jamb Bracket Kit US10B AJK.1004 75.00

70 Series Angle Jamb Bracket Kit US26 AJK.1005 75.00

70 Series Angle Jamb Bracket Kit US26D AJK.1006 75.00

70 Series Angle Jamb Bracket Kit SP4 AJK.1011 75.00

70 Series Angle Jamb Bracket Kit SP10 AJK.1009 75.00

70 Series Angle Jamb Bracket Kit SP313 AJK.1010 75.00

70 Series Angle Jamb Bracket Kit SP28 AJK.1008 75.00

70 Series Angle Jamb Bracket Kit BLK AJK.1007 75.00

70 Hook Assembly - Hold Open Conversion US3 OHPART.10023 55.00

70 Hook Assembly - Hold Open Conversion US4 OHPART.10024 55.00

70 Hook Assembly - Hold Open Conversion US10 OHPART.10025 55.00

70 Hook Assembly - Hold Open Conversion US10B OHPART.10026 55.00

70 Hook Assembly - Hold Open Conversion US26 OHPART.10027 55.00

70 Hook Assembly - Hold Open Conversion US26D OHPART.10028 55.00

70 Hook Assembly - Hold Open Conversion SP4 OHPART.10029 55.00

70 Hook Assembly - Hold Open Conversion SP10 OHPART.10030 55.00

70 Hook Assembly - Hold Open Conversion SP313 OHPART.10031 55.00

70 Hook Assembly - Hold Open Conversion SP28 OHPART.10032 55.00

70 Hook Assembly - Hold Open Conversion SPBLK OHPART.10033 55.00

70 Stop Washer - Stop Only Conversion - OHPART.10034 12.00

70 Shock Spring - OHPART.10035 11.00

70 Roll Pin (Pkg of 10) - OHPART.10036 11.00

70 Adjustment Nut (Pkg of 10) - OHPART.10037 12.00

70 Mounting Pkg US3,US4,SP4 OHPART.10038 30.00

70 Mounting Pkg US10,SP10 OHPART.10039 30.00

70 Mounting Pkg US10B,SP313 OHPART.10040 30.00

70 Mounting Pkg US26,US26D,SP28 OHPART.10041 30.00

70 Mounting Pkg SPBLK OHPART.10042 30.00

70 Security Mounting Pkg - OHPART.10043 34.00

70 Mounting Pkg - 2 1/4" Door US3,US4,SP4 OHPART.10044 30.00

70 Mounting Pkg - 2 1/4" Door US10,SP10 OHPART.10045 30.00

70 Mounting Pkg - 2 1/4" Door US10B,SP313 OHPART.10046 30.00

70 Mounting Pkg - 2 1/4" Door US26,US26D,SP28 OHPART.10047 30.00

70 Mounting Pkg - 2 1/4" Door SPBLK OHPART.10048 30.00

70/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 12.00

70/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 12.00

70/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 12.00

70/79/81/90 Angle Screw Pkg US26,US26D,SP28 OHPART.10052 12.00

70/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 12.00

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

70 and 79 Series

70 Series (continued)

Description Finish Part No. List Price Each

70 Sex Bolt Pkg, Up to 2" Door (Set of 3) US3,US4 OHPART.10054 $35.00

70 Sex Bolt Pkg, Up to 2" Door (Set of 3) US10,SP10 OHPART.10055 35.00

70 Sex Bolt Pkg, Up to 2" Door (Set of 3) US10B,SP313 OHPART.10056 35.00

70 Sex Bolt Pkg, Up to 2" Door (Set of 3) US26,US26D OHPART.10057 35.00

70 Sex Bolt Pkg, Up to 2" Door (Set of 3) SP4 OHPART.10058 35.00

70 Sex Bolt Pkg, Up to 2" Door (Set of 3) SP28 OHPART.10059 35.00

70 Sex Bolt Pkg, Up to 2" Door (Set of 3) SPBLK OHPART.10060 35.00

70 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US3,US4 OHPART.10061 44.00

70 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US10,SP10 OHPART.10062 44.00

70 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US10B,SP313 OHPART.10063 44.00

70 Sex Bolt Pkg, 2" to 3" Door (Set of 3) US26,US26D OHPART.10064 44.00

70 Sex Bolt Pkg, 2" to 3" Door (Set of 3) SP4 OHPART.10065 44.00

70 Sex Bolt Pkg, 2" to 3" Door (Set of 3) SP28 OHPART.10066 44.00

70 Sex Bolt Pkg, 2" to 3" Door (Set of 3) SPBLK OHPART.10067 44.00

79 Series

79 Door Bracket & Pin US3 OHPART.10101 $115.00

79 Door Bracket & Pin US4 OHPART.10102 115.00

79 Door Bracket & Pin US10 OHPART.10103 107.00

79 Door Bracket & Pin US10B OHPART.10104 115.00

79 Door Bracket & Pin US26 OHPART.10105 115.00

79 Door Bracket & Pin US26D OHPART.10106 107.00

79 Door Bracket & Pin SP4 OHPART.10107 66.00

79 Door Bracket & Pin SP10 OHPART.10108 66.00

79 Door Bracket & Pin SP313 OHPART.10109 66.00

79 Door Bracket & Pin SP28 OHPART.10110 66.00

79 Door Bracket & Pin SPBLK OHPART.10111 66.00

79 Jamb Bracket US3 OHPART.10112 356.00

79 Jamb Bracket US4 OHPART.10113 356.00

79 Jamb Bracket US10 OHPART.10114 267.00

79 Jamb Bracket US10B OHPART.10115 356.00

79 Jamb Bracket US26 OHPART.10116 356.00

79 Jamb Bracket US26D OHPART.10117 267.00

79 Jamb Bracket SP4 OHPART.10118 204.00

79 Jamb Bracket SP10 OHPART.10119 204.00

79 Jamb Bracket SP313 OHPART.10120 204.00

79 Jamb Bracket SP28 OHPART.10121 204.00

79 Jamb Bracket SPBLK OHPART.10122 204.00

79 Series Angle Jamb Bracket Kit US3 AJK.1012 169.00

79 Series Angle Jamb Bracket Kit US4 AJK.1013 169.00

79 Series Angle Jamb Bracket Kit US10 AJK.1014 169.00

79 Series Angle Jamb Bracket Kit US10B AJK.1068 169.00

79 Series Angle Jamb Bracket Kit US26 AJK.1016 169.00

79 Series Angle Jamb Bracket Kit US26D AJK.1017 169.00

79 Series Angle Jamb Bracket Kit SP4 AJK.1022 169.00

79 Series Angle Jamb Bracket Kit SP10 AJK.1020 169.00

79 Series Angle Jamb Bracket Kit SP313 AJK.1021 169.00

79 Series Angle Jamb Bracket Kit SP28 AJK.1019 169.00

79 Series Angle Jamb Bracket Kit BLK AJK.1018 169.00

79 Hook Assembly - Hold Open Conversion US3 OHPART.10123 95.00

79 Hook Assembly - Hold Open Conversion US4 OHPART.10124 95.00

79 Hook Assembly - Hold Open Conversion US10 OHPART.10125 95.00

79 Hook Assembly - Hold Open Conversion US10B OHPART.10126 95.00

79 Hook Assembly - Hold Open Conversion US26 OHPART.10127 95.00

79 Hook Assembly - Hold Open Conversion US26D OHPART.10128 95.00

79 Hook Assembly - Hold Open Conversion SP4 OHPART.10129 95.00

79 Hook Assembly - Hold Open Conversion SP10 OHPART.10130 95.00

79 Hook Assembly - Hold Open Conversion SP313 OHPART.10131 95.00

79 Hook Assembly - Hold Open Conversion SP28 OHPART.10132 95.00

79 Hook Assembly - Hold Open Conversion SPBLK OHPART.10133 95.00

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

20 Price Book 7

Effective April 4, 2020 • Rev. 04/20

79, 80 and 81 Series

79 Series (continued)

Description Finish Part No. List Price Each

79 Stop Washer - Stop Only Conversion - OHPART.10134 $12.00

79 Shock Spring - OHPART.10135 12.00

79 Roll Pin (Pkg of 10) - OHPART.10136 12.00

79 Adjustment Nut (Pkg of 10) - OHPART.10137 24.00

79 Mounting Pkg US3,US4,SP4 OHPART.10138 42.00

79 Mounting Pkg US10,SP10 OHPART.10139 42.00

79 Mounting Pkg US10B,SP313 OHPART.10140 42.00

79 Mounting Pkg US26,US26D,SP28 OHPART.10141 42.00

79 Mounting Pkg SPBLK OHPART.10142 42.00

79 Security Mounting Pkg - OHPART.10143 31.00

70/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 12.00

70/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 12.00

70/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 12.00

70/79/81/90 Angle Screw Pkg US26,US26D,SP28 OHPART.10052 12.00

70/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 12.00

79 Sex Bolt Pkg, Up to 2" Door (Set of 4) US3,US4 OHPART.10144 70.00

79 Sex Bolt Pkg, Up to 2" Door (Set of 4) US10,SP10 OHPART.10145 70.00

79 Sex Bolt Pkg, Up to 2" Door (Set of 4) US10B,SP313 OHPART.10146 70.00

79 Sex Bolt Pkg, Up to 2" Door (Set of 4) US26,US26D OHPART.10147 70.00

79 Sex Bolt Pkg, Up to 2" Door (Set of 4) SP4 OHPART.10148 70.00

79 Sex Bolt Pkg, Up to 2" Door (Set of 4) SP28 OHPART.10149 70.00

79 Sex Bolt Pkg, Up to 2" Door (Set of 4) SPBLK OHPART.10150 70.00

79 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US3,US4 OHPART.10151 82.00

79 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US10,SP10 OHPART.10152 82.00

79 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US10B,SP313 OHPART.10153 82.00

79 Sex Bolt Pkg, 2" to 3" Door (Set of 4) US26,US26D OHPART.10154 82.00

79 Sex Bolt Pkg, 2" to 3" Door (Set of 4) SP4 OHPART.10155 82.00

79 Sex Bolt Pkg, 2" to 3" Door (Set of 4) SP28 OHPART.10156 82.00

79 Sex Bolt Pkg, 2" to 3" Door (Set of 4) SPBLK OHPART.10157 82.00

80 and 81 Series

81 Series Angle Jamb Bracket Kit US3 AJK.1023 60.00

81 Series Angle Jamb Bracket Kit US4 AJK.1024 60.00

81 Series Angle Jamb Bracket Kit US10 AJK.1025 60.00

81 Series Angle Jamb Bracket Kit US10B AJK.1026 60.00

81 Series Angle Jamb Bracket Kit US26 AJK.1025 60.00

81 Series Angle Jamb Bracket Kit US26D AJK.1026 60.00

81 Series Angle Jamb Bracket Kit SP4 AJK.1031 60.00

81 Series Angle Jamb Bracket Kit SP10 AJK.1029 60.00

81 Series Angle Jamb Bracket Kit SP313 AJK.1030 60.00

81 Series Angle Jamb Bracket Kit SP28 AJK.1028 60.00

81 Series Angle Jamb Bracket Kit BLK AJK.1027 60.00

81-1 1/4" Shim Kit US3 SHK.1045 24.00

81-1 1/4" Shim Kit US4 SHK.1046 24.00

81-1 1/4" Shim Kit US26 SHK.1048 24.00

81-1 1/4" Shim Kit US26D SHK.1047 24.00

81-1 1/4" Shim Kit SP4 SHK.1049 24.00

81-1 1/4" Shim Kit SP10 SHK.1050 24.00

81-1 1/4" Shim Kit SP313 SHK.1052 24.00

81-1 1/4" Shim Kit SP28 SHK.1051 24.00

81-1 1/4" Shim Kit BLK SHK.1053 24.00

81-2 1/2" Shim Kit US3 SHK.1054 31.00

81-2 1/2" Shim Kit US4 SHK.1055 31.00

81-2 1/2" Shim Kit US26 SHK.1057 31.00

81-2 1/2" Shim Kit US26D SHK.1056 31.00

81-2 1/2" Shim Kit SP4 SHK.1058 31.00

81-2 1/2" Shim Kit SP10 SHK.1059 31.00

81-2 1/2" Shim Kit SP313 SHK.1061 31.00

81-2 1/2" Shim Kit SP28 SHK.1060 31.00

81-2 1/2" Shim Kit BLK SHK.1062 31.00

81-3 3/4" Shim Kit US3 SHK.1063 46.00

81-3 3/4" Shim Kit US4 SHK.1064 46.00

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

80 and 81 Series (continued)

81-3 3/4" Shim Kit US26 SHK.1066 $46.00

81-3 3/4" Shim Kit US26D SHK.1065 46.00

81-3 3/4" Shim Kit SP4 SHK.1067 46.00

81-3 3/4" Shim Kit SP10 SHK.1068 46.00

81-3 3/4" Shim Kit SP313 SHK.1070 46.00

81-3 3/4" Shim Kit SP28 SHK.1069 46.00

81-3 3/4" Shim Kit BLK SHK.1071 46.00

80/81 Handle, Spring & Plunger Pkg US3 OHPART.10201 78.00

80/81 Handle, Spring & Plunger Pkg US4 OHPART.10202 71.00

80/81 Handle, Spring & Plunger Pkg US10 OHPART.10203 71.00

80/81 Handle, Spring & Plunger Pkg US10B OHPART.10204 71.00

80/81 Handle, Spring & Plunger Pkg US32 OHPART.10205 78.00

80/81 Handle, Spring & Plunger Pkg US32D,652 OHPART.10206 66.00

80/81 Handle, Spring & Plunger Pkg SP4 OHPART.10207 55.00

80/81 Handle, Spring & Plunger Pkg SP10 OHPART.10208 55.00

80/81 Handle, Spring & Plunger Pkg SP313 OHPART.10209 55.00

80/81 Handle, Spring & Plunger Pkg SP28 OHPART.10210 55.00

80/81 Handle, Spring & Plunger Pkg SPBLK OHPART.10211 55.00

80/81 Handle US3 OHPART.10212 71.00

80/81 Handle US4 OHPART.10213 66.00

80/81 Handle US10 OHPART.10214 66.00

80/81 Handle US10B OHPART.10215 66.00

80/81 Handle US26 OHPART.10216 71.00

80/81 Handle US26D,652 OHPART.10217 58.00

80/81 Handle SP4 OHPART.10218 44.00

80/81 Handle SP10 OHPART.10219 44.00

80/81 Handle SP313 OHPART.10220 44.00

80/81 Handle SP28 OHPART.10221 44.00

80/81 Handle SPBLK OHPART.10222 44.00

80/81 Plunger - OHPART.10223 12.00

80/81 Plunger Spring - OHPART.10224 11.00

81 Channel US3 OHPART.10244 79.00

81 Channel US4 OHPART.10245 71.00

81 Channel US10 OHPART.10246 71.00

81 Channel US10B OHPART.10247 71.00

81 Channel US32 OHPART.10248 79.00

81 Channel US32D OHPART.10249 55.00

81 Channel 652 OHPART.10250 35.00

81/90 End Cap - OHPART.10256 24.00

81 Shock Spring - OHPART.10257 12.00

80 Mounting Pkg, 1 3/4" Door US3,US4,SP4 OHPART.10226 37.00

80 Mounting Pkg, 1 3/4" Door US10,SP10 OHPART.10227 37.00

80 Mounting Pkg, 1 3/4" Door US10B,SP313 OHPART.10228 37.00

80 Mounting Pkg, 1 3/4" Door US32,US32D,652,SP28 OHPART.10229 37.00

80 Mounting Pkg, 1 3/4" Door SPBLK OHPART.10230 37.00

80HD Mounting Pkg, 1 3/4" Door US3,US4,SP4 OHPART.10231 57.00

80HD Mounting Pkg, 1 3/4" Door US10,SP10 OHPART.10232 57.00

80HD Mounting Pkg, 1 3/4" Door US10B,SP313 OHPART.10233 57.00

80HD Mounting Pkg, 1 3/4" Door US32,US32D,652,SP28 OHPART.10234 57.00

80HD Mounting Pkg, 1 3/4" Door SPBLK OHPART.10235 57.00

81 Mounting Pkg, Up to 2 1/4" Door US3,US4,SP4 OHPART.10236 37.00

81 Mounting Pkg, Up to 2 1/4" Door US10,SP10 OHPART.10237 37.00

81 Mounting Pkg, Up to 2 1/4" Door US10B,SP313 OHPART.10238 37.00

81 Mounting Pkg, Up to 2 1/4" Door US32,US32D ,652 OHPART.10239 37.00

81 Mounting Pkg, Up to 2 1/4" Door SPBLK OHPART.10240 37.00

80 Security Mounting Pkg, 1 3/4" Door - OHPART.10241 27.00

80HD Security Mounting Pkg, 1 3/4" Door - OHPART.10242 34.00

81 Security Mounting Pkg, Up to 2 1/4" Door - OHPART.10243 27.00

70/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 12.00

70/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 12.00

70/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 12.00

70/79/81/90 Angle Screw Pkg US32,US32D,SP28 OHPART.10052 12.00

70/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 12.00

80 and 81 Series

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

22 Price Book 7

Effective April 4, 2020 • Rev. 04/20

90 Series

Description Finish List Price Each

90 Arm Assembly US3 $254.00

90 Arm Assembly US4 236.00

90 Arm Assembly US10 236.00

90 Arm Assembly US10B 248.00

90 Arm Assembly US32 254.00

90 Arm Assembly US32D 221.00

90 Arm Assembly 652 165.00

90 Arm Assembly SP4 141.00

90 Arm Assembly SP10 141.00

90 Arm Assembly SP313 141.00

90 Arm Assembly SP28 141.00

90 Arm Assembly SPBLK 141.00

Description Finish List Price Each

90 Channel Assembly - H, S or F US3 $306.00

90 Channel Assembly - H,S or F US4 274.00

90 Channel Assembly - H, S or F US10 274.00

90 Channel Assembly - H,S or F US10B 291.00

90 Channel Assembly - H, S or F US32 306.00

90 Channel Assembly - H,S or F US32D 267.00

90 Channel Assembly - H, S or F 652 199.00

90 Channel Assembly - H,S or F SP4 165.00

90 Channel Assembly - H, S or F SP10 165.00

90 Channel Assembly - H,S or F SP313 165.00

90 Channel Assembly - H, S or F SP28 165.00

90 Channel Assembly - H,S or F SPBLK 165.00

90 Channel Assembly - SE US3 364.00

90 Channel Assembly - SE US4 333.00

90 Channel Assembly - SE US10 333.00

90 Channel Assembly - SE US10B 351.00

90 Channel Assembly - SE US32 364.00

90 Series

How to Order Arm Assembly

ARM90 4 H - US3

Size - 2, 3, 4, 5, 6

Function - H (Hold Open), S (Stop Only),

F (Friction Hold Open), SE (Stop Only)

Finish - US3, US4, US10, US10B, US32, US32D, 652

SP4, SP10, SP313, SP28, SPBLK

90 Series

How to Order Arm Assembly

CHANNEL 90 4 H - US3

Size - 2, 3, 4, 5, 6

Function - H (Hold Open), S (Stop Only),

F (Friction Hold Open), SE (Stop Only)

Finish - US3, US4, US10, US10B, US32, US32D, 652

SP4, SP10, SP313, SP28, SPBLK

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

90 Series

90 Series (continued)

Description Finish Part No. List Price Each

90 Channel Assembly - SE US32D 325.00

90 Channel Assembly - SE 652 258.00

90 Channel Assembly - SE SP4 224.00

90 Channel Assembly - SE SP10 224.00

90 Channel Assembly - SE SP313 224.00

90 Channel Assembly - SE SP28 224.00

90 Channel Assembly - SE SPBLK 224.00

90 Series Angle Jamb Bracket Kit US3 60.00

90 Series Angle Jamb Bracket Kit US4 60.00

90 Series Angle Jamb Bracket Kit US10 60.00

90 Series Angle Jamb Bracket Kit US10B 60.00

90 Series Angle Jamb Bracket Kit US26 AJK.1032 60.00

90 Series Angle Jamb Bracket Kit US26D AJK.1060 60.00

90 Series Angle Jamb Bracket Kit SP4 AJK.1038 60.00

90 Series Angle Jamb Bracket Kit SP10 AJK.1036 60.00

90 Series Angle Jamb Bracket Kit SP313 AJK.1037 60.00

90 Series Angle Jamb Bracket Kit SP28 AJK.1035 60.00

90 Series Angle Jamb Bracket Kit BLK AJK.1034 60.00

90-1 1/4" Shim Kit US3 29.00

90-1 1/4" Shim Kit US4 29.00

90-1 1/4" Shim Kit US32 SHK.1023 29.00

90-1 1/4" Shim Kit US32D SHK.1022 29.00

90-1 1/4" Shim Kit SP4 SHK.1024 29.00

90-1 1/4" Shim Kit SP10 SHK.1025 29.00

90-1 1/4" Shim Kit SP313 SHK.1027 29.00

90-1 1/4" Shim Kit SP28 SHK.1026 29.00

90-1 1/4" Shim Kit BLK SHK.1028 29.00

90-2 1/2" Shim Kit US3 37.00

90-2 1/2" Shim Kit US4 37.00

90-2 1/2" Shim Kit US32 SHK.1030 37.00

90-2 1/2" Shim Kit US32D SHK.1029 37.00

90-2 1/2" Shim Kit SP4 SHK.1031 37.00

90-2 1/2" Shim Kit SP10 SHK.1032 37.00

90-2 1/2" Shim Kit SP313 SHK.1034 37.00

90-2 1/2" Shim Kit SP28 SHK.1033 37.00

90-2 1/2" Shim Kit BLK SHK.1035 37.00

90-3 3/4" Shim Kit US3 58.00

90-3 3/4" Shim Kit US4 58.00

90-3 3/4" Shim Kit US32 SHK.1037 58.00

90-3 3/4" Shim Kit US32D SHK.1036 58.00

90-3 3/4" Shim Kit SP4 SHK.1038 58.00

90-3 3/4" Shim Kit SP10 SHK.1039 58.00

90-3 3/4" Shim Kit SP313 SHK.1041 58.00

90-3 3/4" Shim Kit SP28 SHK.1040 58.00

90-3 3/4" Shim Kit BLK SHK.1042 58.00

70/79/81/90 Angle Screw Pkg US3,US4,SP4 OHPART.10049 12.00

70/79/81/90 Angle Screw Pkg US10,SP10 OHPART.10050 12.00

70/79/81/90 Angle Screw Pkg US10B,SP313 OHPART.10051 12.00

70/79/81/90 Angle Screw Pkg US32,US32D,SP28 OHPART.10052 12.00

70/79/81/90 Angle Screw Pkg SPBLK OHPART.10053 12.00

90 Hold Open Conversion Kit - OHPART.10325 34.00**

90 Friction Hold Open Conversion Kit - OHPART.10326 24.00**

l90 End Cap SPBLK OHPART.11103 24.00

l90 End Cap & Spring Assy. SPBLK OHPART.11104 30.00

l90 Mounting Pkg, Up to 2 1/4" Dr. US3,US4,SP4 OHPART.11105 57.00

l90 Mounting Pkg, Up to 2 1/4" Dr. US10,SP10 OHPART.11106 57.00

l90 Mounting Pkg, Up to 2 1/4" Dr. US10B,SP313 OHPART.11107 57.00

l90 Mounting Pkg, Up to 2 1/4" Dr. US32,US32D,652,SP28 OHPART.11108 57.00

l90 Mounting Pkg, Up to 2 1/4" Dr. SPBLK OHPART.11109 57.00

l90 SE Conversion Kit SPBLK OHPART.11110 34.00

l90 Security Mount Pkg 2 1/4" - OHPART.10243 27.00

**Note: Items not available in ProXpress

lFor Overheads shipped after October 1, 2006.

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

24 Price Book 7

Effective April 4, 2020 • Rev. 04/20

100 Series

Description Finish List Price Each

100 Arm Assembly - Not ADJ, CJLH or CJRH US3 $240.00

100 Arm Assembly - Not ADJ,CJLH or CJRH US4 225.00

100 Arm Assembly - Not ADJ,CJLH or CJRH US10 221.00

100 Arm Assembly - Not ADJ,CJLH or CJRH US10B 225.00

100 Arm Assembly - Not ADJ,CJLH or CJRH US32 240.00

100 Arm Assembly - Not ADJ,CJLH or CJRH US32D 210.00

100 Arm Assembly - Not ADJ,CJLH or CJRH SP4 210.00

100 Arm Assembly - Not ADJ,CJLH or CJRH SP10 210.00

100 Arm Assembly - Not ADJ,CJLH or CJRH SP313 210.00

100 Arm Assembly - Not ADJ,CJLH or CJRH SP28 210.00

100 Arm Assembly - Not ADJ,CJLH or CJRH SPBLK 210.00

100 Arm Assembly with ADJ US3 305.00

100 Arm Assembly with ADJ US4 290.00

100 Arm Assembly with ADJ US10 286.00

100 Arm Assembly with ADJ US10B 290.00

100 Arm Assembly with ADJ US32 305.00

100 Arm Assembly with ADJ US32D 275.00

100 Arm Assembly with ADJ SP4 275.00

100 Arm Assembly with ADJ SP10 275.00

100 Arm Assembly with ADJ SP313 275.00

100 Arm Assembly with ADJ SP28 275.00

100 Arm Assembly with ADJ SPBLK 275.00

100 Arm Assembly with CJLH or CJRH US3 304.00

100 Arm Assembly with CJLH or CJRH US4 289.00

100 Arm Assembly with CJLH or CJRH US10 285.00

100 Arm Assembly with CJLH or CJRH US10B 289.00

100 Arm Assembly with CJLH or CJRH US32 304.00

100 Arm Assembly with CJLH or CJRH US32D 274.00

100 Arm Assembly with CJLH or CJRH SP4 274.00

100 Arm Assembly with CJLH or CJRH SP10 274.00

100 Arm Assembly with CJLH or CJRH SP313 274.00

100 Arm Assembly with CJLH or CJRH SP28 274.00

100 Arm Assembly with CJLH or CJRH SPBLK 274.00

100 Series

How to Order Arm Assembly

ARM10 4 H - US3

Size - 1, 2, 3, 4, 5, 6

Function - H (Hold Open), S (Stop Only), HP (Internal Hold Open),

F (Friction Hold Open), SE (Stop Only)

Optional Jamb Bracket - ADJ - Adjustable Jamb Bracket

CJLH, CJRH - LCN5030 Jamb Bracket

Finish -

US3, US4, US10, US10B, US32, US32D,

SP4, SP10, SP313, SP28, SPBLK

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

100 Series

Description Finish Part No. List Price Each

100 Channel Assembly, Not ADJ or SE - $267.00

100 Channel Assembly with ADJ - 295.00

100 Channel Assembly with SE - 298.00

100H Knob Pkg US3,US4,SP4 OHPART.10401 29.00

100H Knob Pkg US10,SP10 OHPART.10402 29.00

100H Knob Pkg US10B,SP313 OHPART.10403 29.00

100H Knob Pkg US32,US32D,SP28 OHPART.10404 29.00

100H Knob Pkg SPBLK OHPART.10405 29.00

100 Mounting Pkg US3,US4,SP4 OHPART.10406 26.00

100 Mounting Pkg US10,SP10 OHPART.10407 26.00

100 Mounting Pkg US10B,SP313 OHPART.10408 26.00

100 Mounting Pkg US32,US32D,SP28 OHPART.10409 26.00

100 Mounting Pkg SPBLK OHPART.10410 26.00

100ADJ Mounting Pkg US3,US4,SP4 OHPART.10411 26.00

100ADJ Mounting Pkg US10,SP10 OHPART.10412 26.00

100ADJ Mounting Pkg US10B,SP313 OHPART.10413 26.00

100ADJ Mounting Pkg US32,US32D,SP28 OHPART.10414 26.00

100ADJ Mounting Pkg SPBLK OHPART.10415 26.00

100 Security Mounting Pkg - OHPART.10416 12.00

100ADJ Security Mounting Pkg - OHPART.10417 12.00

100ADJ Set Screw (Pkg of 10) - OHPART.10418 11.00

100F Conversion Kit - OHPART.10419 24.00**

100H Conversion Kit US3,US4,SP4 OHPART.10420 69.00

100H Conversion Kit US10,SP10 OHPART.10421 69.00

100H Conversion Kit US10B,SP313 OHPART.10422 69.00

100H Conversion Kit US32,US32D,SP28 OHPART.10423 69.00**

100H Conversion Kit SPBLK OHPART.10424 69.00

100ADJ Jamb Channel US3 OHPART.10425 91.00

100ADJ Jamb Channel US4 OHPART.10426 91.00

100ADJ Jamb Channel US10 OHPART.10427 91.00

100ADJ Jamb Channel US10B OHPART.10428 91.00

100ADJ Jamb Channel US32 OHPART.10429 91.00

100ADJ Jamb Channel US32D OHPART.10430 91.00

100ADJ Jamb Channel SP4 OHPART.10431 79.00

100ADJ Jamb Channel SP10 OHPART.10432 79.00

100ADJ Jamb Channel SP313 OHPART.10433 79.00

100ADJ Jamb Channel SP28 OHPART.10434 79.00

100ADJ Jamb Channel SPBLK OHPART.10435 79.00

100 Grommet (Pkg of 10) - OHPART.10436 20.00

100 SE KIT - OHPART.10437 93.00

100 Series

How to Order Arm Assembly

CHANNEL 10 4 H - US3

Size - 1, 2, 3, 4, 5, 6

Function - H (Hold Open), S (Stop Only), HP (Internal Hold Open),

F (Friction Hold Open), SE (Stop Only)

Optional Jamb Bracket - ADJ - Adjustable Jamb Bracket

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

26 Price Book 7

Effective April 4, 2020 • Rev. 04/20

410/450 Series

Description Finish List Price Each

410/450 Arm Assembly US3 $118.00

410/450 Arm Assembly US4 102.00

410/450 Arm Assembly US10 105.00

410/450 Arm Assembly US10B 110.00

410/450 Arm Assembly US32 118.00

410/450 Arm Assembly US32D 99.00

410/450 Arm Assembly 652 69.00

410/450 Arm Assembly SP4 69.00

410/450 Arm Assembly SP10 69.00

410/450 Arm Assembly SP313 69.00

410/450 Arm Assembly SP28 69.00

410/450 Arm Assembly SPBLK 69.00

Description Finish List Price Each

450 Channel Assembly, Not SE US3 $169.00

450 Channel Assembly, Not SE US4 148.00

450 Channel Assembly, Not SE US10 148.00

450 Channel Assembly, Not SE US10B 157.00

450 Channel Assembly, Not SE US32 169.00

450 Channel Assembly, Not SE US32D 141.00

450 Channel Assembly, Not SE 652 103.00

450 Channel Assembly, Not SE SP4 103.00

450 Channel Assembly, Not SE SP10 103.00

450 Channel Assembly, Not SE SP313 103.00

450 Channel Assembly, Not SE SP28 103.00

450 Channel Assembly, Not SE SPBLK 103.00

450SE Channel Assembly US3 196.00

450SE Channel Assembly US4 176.00

450SE Channel Assembly US10 176.00

450SE Channel Assembly US10B 184.00

450SE Channel Assembly US32 196.00

450SE Channel Assembly US32D 170.00

**Note: Items not available in ProXpress

410/450 Series

How to Order Arm Assembly

ARM41/45 4 H US3

Size - 1, 2, 3, 4, 5

Function - H (Hold Open), S (Stop Only)

F (Friction Hold Open), SE (Stop Only)

Finish -

US3, US4, US10, US10B, US32, US32D, 652,

SP4, SP10, SP313, SP28, SPBLK

How to Order Channel Assembly

CHANNEL 41 4 H US10

Model - 41 (410 Series), 45 (450 Series)

Size - 1, 2, 3, 4, 5

Function - H (Hold Open), S (Stop Only),

F (Friction Hold Open), SE (Stop Only)

Finish -

US3, US4, US10, US10B, US32, US32D, 652,

SP4, SP10, SP313, SP28, SPBLK

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

410/450 Series

410/450 Series (continued)

Description Finish Part No. List Price Each

450SE Channel Assembly 652 $131.00

450SE Channel Assembly SP4 131.00

450SE Channel Assembly SP10 131.00

450SE Channel Assembly SP313 131.00

450SE Channel Assembly SP28 131.00

450SE Channel Assembly SPBLK 131.00

410 Channel Assembly, Not SE - 71.00

410SE Channel Assembly - 99.00

450 Series Angle Jamb Bracket Kit US3 54.00

450 Series Angle Jamb Bracket Kit US4 54.00

450 Series Angle Jamb Bracket Kit US10 54.00

450 Series Angle Jamb Bracket Kit US10B 54.00

450 Series Angle Jamb Bracket Kit US26 AJK.1039 54.00

450 Series Angle Jamb Bracket Kit US26D AJK.1040 54.00

450 Series Angle Jamb Bracket Kit SP4 AJK.1045 54.00

450 Series Angle Jamb Bracket Kit SP10 AJK.1043 54.00

450 Series Angle Jamb Bracket Kit SP313 AJK.1044 54.00

450 Series Angle Jamb Bracket Kit SP28 AJK.1042 54.00

450 Series Angle Jamb Bracket Kit BLK AJK.1041 54.00

450-1 3/16" Shim Kit US3 16.00

450-1 3/16" Shim Kit US4 16.00

450-1 3/16" Shim Kit US32 SHK.1002 16.00

450-1 3/16" Shim Kit US32D SHK.1001 16.00

450-1 3/16" Shim Kit SP4 SHK.1003 16.00

450-1 3/16" Shim Kit SP10 SHK.1004 16.00

450-1 3/16" Shim Kit SP313 SHK.1006 16.00

450-1 3/16" Shim Kit SP28 SHK.1005 16.00

450-1 3/16" Shim Kit BLK SHK.1007 16.00

450-2 3/8" Shim Kit US3 28.00

450-2 3/8" Shim Kit US4 28.00

450-2 3/8" Shim Kit US32 SHK.1009 28.00

450-2 3/8" Shim Kit US32D SHK.1008 28.00

450-2 3/8" Shim Kit SP4 SHK.1010 28.00

450-2 3/8" Shim Kit SP10 SHK.1011 28.00

450-2 3/8" Shim Kit SP313 SHK.1013 28.00

450-2 3/8" Shim Kit SP28 SHK.1012 28.00

450-2 3/8" Shim Kit BLK SHK.1014 28.00

450-3 9/16" Shim Kit US3 35.00

450-3 9/16" Shim Kit US4 35.00

450-3 9/16" Shim Kit US32 SHK.1016 35.00

450-3 9/16" Shim Kit US32D SHK.1015 35.00

450-3 9/16" Shim Kit SP4 SHK.1017 35.00

450-3 9/16" Shim Kit SP10 SHK.1018 35.00

450-3 9/16" Shim Kit SP313 SHK.1020 35.00

450-3 9/16" Shim Kit SP28 SHK.1019 35.00

450-3 9/16" Shim Kit BLK SHK.1021 35.00

410/450 New Style End Cap * - OHPART.10516 12.00

410/450 New Style End Cap Assy * - OHPART.10517 13.00

450 Mounting Pkg, 1 3/4" Door US3,US4,SP4 OHPART.10518 12.00

450 Mounting Pkg, 1 3/4" Door US10,SP10 OHPART.10519 12.00

450 Mounting Pkg, 1 3/4" Door US10B,SP313 OHPART.10520 12.00

450 Mounting Pkg, 1 3/4" Door US32,US32D,652,SP28 OHPART.10521 12.00

450 Mounting Pkg, 1 3/4" Door SPBLK OHPART.10522 12.00

450 Security Mounting Pkg, 1 3/4" Door - OHPART.10523 27.00

450 Mounting Pkg, Up to 2 1/4" Door US3,US4,SP4 OHPART.10524 22.00

450 Mounting Pkg, Up to 2 1/4" Door US10,SP10 OHPART.10525 22.00

450 Mounting Pkg, Up to 2 1/4" Door US10B,SP313 OHPART.10526 22.00

450 Mounting Pkg, Up to 2 1/4" Door US32,US32D,652,SP28 OHPART.10527 22.00

450 Mounting Pkg, Up to 2 1/4" Door SPBLK OHPART.10528 22.00

450 Mounting Pkg, Up to 1 3/8" Door US3,US4,SP4 OHPART.10529 40.00

450 Mounting Pkg, Up to 1 3/8" Door US10,SP10 OHPART.10530 40.00

450 Mounting Pkg, Up to 1 3/8" Door US10B,SP313 OHPART.10531 40.00

450 Mounting Pkg, Up to 1 3/8" Door US32,US32D,652,SP28 OHPART.10532 40.00

450 Mounting Pkg, Up to 1 3/8" Door SPBLK OHPART.10533 40.00

* Note: Old style units were built before December 2002, End Cap has Mounting Hole in the End Cap.

New style units were built starting December 2002, the End Cap goes into the channel and the mounting hole goes through both the channel & End Cap.

Prices subject to change without notice.Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

28 Price Book 7

Effective April 4, 2020 • Rev. 04/20

410/450 & 280 Series

410/450 Series (continued)

Description Finish Part No. List Price Each

410 Old Style Mounting Pkg * US3,US4,SP4 OHPART.10534 $16.00

410 Old Style Mounting Pkg * US10,SP10 OHPART.10535 16.00

410 Old Style Mounting Pkg * US10B,SP313 OHPART.10536 16.00

410 Old Style Mounting Pkg * US32,US32D,652,SP28 OHPART.10537 16.00

410 Old Style Mounting Pkg * SPBLK OHPART.10538 16.00

410 New Style Mounting Pkg * US3,US4,SP4 OHPART.10539 24.00

410 New Style Mounting Pkg * US10,SP10 OHPART.10540 24.00

410 New Style Mounting Pkg * US10B,SP313 OHPART.10541 24.00

410 New Style Mounting Pkg * US32,US32D,652,SP28 OHPART.10542 24.00

410 New Style Mounting Pkg * SPBLK OHPART.10543 24.00

410 New Security Mounting Pkg - OHPART.10554 21.00

450 Angle Screw Pkg US3,US4,SP4 OHPART.10556 12.00

450 Angle Screw Pkg US10,SP10 OHPART.10557 12.00

450 Angle Screw Pkg US10B,SP313 OHPART.10558 12.00

450 Angle Screw Pkg US32,US32D,SP28 OHPART.10559 12.00

450 Angle Screw Pkg SPBLK OHPART.10560 12.00

410 Old Security Mounting Pkg, 1 3/4" Door - OHPART.10555 21.00

410/450 Hold Open Conversion Kit - OHPART.10544 38.00

410/450 Friction Hold Open Conversion Kit - OHPART.10545 29.00

450 SE Old Style Conversion Kit * US3,US4,SP4 OHPART.10546 38.00

450 SE Old Style Conversion Kit * US10,SP10 OHPART.10547 38.00

450 SE Old Style Conversion Kit * US10B,SP313 OHPART.10548 38.00

450 SE Old Style Conversion Kit * US32 OHPART.10549 38.00

450 SE Old Style Conversion Kit * US32D,652,SP28 OHPART.10550 38.00

450 SE Old Style Conversion Kit * SPBLK OHPART.10551 38.00

410 SE Old Style Conversion Kit * - OHPART.10552 35.00

410/450 SE New Style Conversion Kit * - OHPART.10553 35.00

* Note: Old style units were built before December 2002, End Cap has Mounting Hole in the End Cap.

New style units were built starting December 2002, the End Cap goes into the channel and the mounting hole goes through both the channel &

End Cap.

510/550 Series

Description Finish Part No. List Price Each

550 Series Angle Jamb Bracket Kit US32D AJK.1070 $48.00

550-1 1/4" Shim Kit US32D SHK.1072 16.00

550-2 1/2" Shim Kit US32D SHK.1073 28.00

550-3 3/4" Shim Kit US32D SHK.1074 35.00

510 Mounting Package US32D,652 OHPART.11273 57.00

550 Mounting Package US32D,652 OHPART.11271 57.00

510-550 Friction Hold Open Conversion Kit - OHPART.11272 24.00

280 Series

Description Finish Part No. List Price Each

280 Arm Assembly US28 OHPART.10601 $157.00

280 Arm Assembly 313AN OHPART.10602 157.00

280 Mounting Package US28 OHPART.10603 35.00

280 Mounting Package 313AN OHPART.10604 35.00

280 Security Mounting Package - OHPART.10605 26.00

Prices subject to change without notice. Bold pricing indicates item is in stock and available for Fast Track and ProXpress.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Notes

Prices subject to change without notice.

Price Book 7

Effective April 4, 2020 • Rev. 04/20

Notes

Prices subject to change without notice.

Price Book 7

Effective April 4, 2020 • Rev. 04/20 31

Glynn-Johnson (the "Company") warrants only to

Customer that the products will be free from defects in

material and workmanship for a period of 12 months

from the date of shipment of the products. The

Customer shall be obligated to promptly report any

failure to conform to this warranty in writing to the

Company within the warranty period provided above.

Company’s sole obligation under this warranty is limited

to repairing or replacing, at its option, the defective

products.

NO OTHER WARRANTIES, EXPRESS OR IMPLIED,

ARE MADE WITH RESPECT TO THE PRODUCTS

INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE.

The provisions of this limited warranty do not apply to

products: (i) used for the purposes for which they are

not designed or intended; (ii) which have been repaired

or altered without Company's prior written consent;

(iii) which have been subjected to misuse, abuse,

negligence, or accident; (iv) which have been improperly

stored, installed, maintained, or operated; (v) which

have been used in violation of written instructions

provided by Company to Customer; (vi) which have

been subjected to improper temperature, humidity,

or other environmental conditions; (vii) which have

been affected by normal wear and tear; or (viii) which,

based on Company's examination, do not disclose

to Company's satisfaction nonconformance to the

warranty.

The following costs and expenses are not covered by

the provisions of this limited warranty: (i) labor costs for

the removal and reinstallation of products; (ii) shipping

and freight expenses required to return products to

Company; (iii) normal maintenance; and (iv) economic

losses. In addition, the provisions of this warranty

are not applicable to anything other than defects in

Company’s material (products only) or workmanship.

CONSUMER PRODUCTS. With respect to "consumer

products" as defined under the Magnuson-Moss

Warranty Act ("MMWA"), the following statements are

made. (a) Some states do not allow limitations on how

long an implied warranty lasts, so the above limitation

may not apply to you. IF ANY IMPLIED WARRANTY IS

PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE

DURATION OF THE WARRANTY PROVIDED ABOVE.

(b) Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above

limitation or exclusion may not apply to you. (c) This

warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

GLYNN-JOHNSON WARRANTY

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.

As a $2 billion provider of security solutions for homes and businesses, Allegion

employs more than 7,800 people and sells products in more than 120 countries

across the world. Allegion comprises 23 global brands, including strategic

brands CISA®

, Interﬂex®

, LCN®

, Schlage® and Von Duprin®

For more, visit www.allegion.com

About Allegion

010061, Rev. 04/20

allegion.com/us

Glynn Johnson 2020 Price Book (Effective 4/4/20) GJ PB7

Navigation menu

Versions of this User Manual:

Views

Navigation