Godex GRG013 WLAN IP Print Server Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2411189
Application ID	dAZ2vRi3vEBP6wD3xwQ7kQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.7kB (133784 bits)
Date Submitted	2014-10-06 00:00:00
Date Available	2014-10-06 00:00:00
Creation Date	2017-10-21 00:12:14
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 00:12:14
Document Title	Microsoft Word - WIFI installation guide -MODULE-ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ChristyFan

GR‐G013
WIFI MODULE MANUAL
Thanks for your purchase of the WIFI Module.
MODULE
GR‐G013
Microprocessor
MediaTek RT5350
SDRAM
16*16 256Mbit 166Mhz
Flash Memory
32Mbit Serial Flash 86Mhz
Lan Speed
10/100 Mbps
Wireless
802.11b/g/n 1T1R
Antenna Connector
I‐PEX connector
LED Indicators
1 Power LED,1 WLAN LED,1LAN LED
Init/Reset Button
1 Initial Switch
Console Port
Debug used
0℃~+40℃
Operation
Temperature
Input
Voltage/Current
5VDC/1A
GR‐G013
WIFI MODULE MANUAL
WIFI installation guide:
1. Please open the printer’s bottom cover.
2. Find the WIFI module socket of main board.
3. Place this module smoothly like figure 1.
4. Insert this module to the socket, and keep the installation line at the position as figure 2.
GR‐G013
WIFI MODULE MANUAL
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures.
Refering to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without C2P.
GR‐G013
WIFI MODULE MANUAL
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this
certified RF module is integrated.
Additional testing and certification may be necessary when multiple modules are used.
20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such
configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.
GR‐G013
WIFI MODULE MANUAL
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed
and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end
user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this
equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This
device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: WD6GRG013 ". If the size of the end product is larger than
8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Antenna list
Ant.
Brand
Model Name
Antenna Type
Connector
Gain (dBi)
TRONTEK
TDA‐P2FMIPF000
PCB Antenna
I‐PEX
4.61
TRONTEK
TAT280‐MRSX000
dipole Antenna
I‐PEX
2.34

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Author                          : ChristyFan
Create Date                     : 2014:10:01 17:16:10+08:00
Modify Date                     : 2014:10:01 17:17:10+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:10:01 17:17:10+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - WIFI installation guide -MODULE-ok.doc
Creator                         : ChristyFan
Document ID                     : uuid:6e5f29e9-fcba-431f-9ba6-995750c0b35c
Instance ID                     : uuid:93caf01b-fa9d-4233-b499-4daa8553c791
Page Count                      : 5

EXIF Metadata provided by EXIF.tools