Good Way Technology TD1200 Power Monitor Switch User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1845328
Application ID	dGhyuUnxsAStEMl9hlM/bw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	88.3kB (1103759 bits)
Date Submitted	2012-11-26 00:00:00
Date Available	2012-11-26 00:00:00
Creation Date	2012-10-30 14:31:53
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2012-10-30 14:31:53
Document Title	untitled

User's Manual
/\
\2
Table of contents
Safety inslru 'ons
Copyright ......
Trademarks
lntroduct
Features.
Package conten
Connection diagra
Product overview
Basic operation...
- Include to or exclude from a Z—Wave° network
- Getting started“
Advanced operatic
. Association
— Association diagram
. Overload protec1ion,
— Factory default,
. User definition ,
Command classes.
LED indicator .....
Addition intonnat n .
— Z—Waveo 7777777
v Wireless range
Regulatory compliance
, FCC conditions.
- WEEE information
Specification .........................................
ea
Before attempting to connect, operate or adjust lnls product, please
save and read me Users Manual completely The style or me
pmduct shown in this Users Manual may be drtlefenl (run the actual
unit due to vamus models,
Safety instructions
Always read the safety instructions carefully,
I Keep this User's Manual tor tuture reference
I Keep this equipment away from humidity
I If any of the following situation arises, get the equipment
checked by a service technrcran:
- The equipment has been exposed to moisture,
' The equipment has been dropped and damaged.
- The equipment has obvious sign of breakage,
- The equipment has not been working well or cannot get
it to work according to the User's Manual,
Copyright
This document contains proprietary intonnation protected
by copyright, All right are reserved, No pan of this manual
may be reproduced by any mechanical. electronic or other
means, in any form, without prior written permission ol the
manufacturer
Trademarks
All trademarks and registered trademarls are the property
of their respective owners or companies
Introduction
The Power Monitor Switch is a device wtich combines the
AC outlet switch and power measurement functions. It bases
on Z7Wave- wireless technology and enables you to find out
what appliances are actually worth keeping lugging in and
can save your energy costs, It also allows you to tun onlotl‘
the attached appliance. electronic device or lamp wirelessly
by using a Z~Wave' protocol remote controller, In short, you
cart monitor the power consumption at your appliances easily
and tum onloff at your home through PC connectivity with
Z-Wavefi USB dongle, Z-Wavee remote controller, or through
Internet with gateway when you are awayfrorn home,
Features
I Protect the house automatically via cutting on the power
when the appliance overtoads, (When Red LED is
flashing, it enters “overload protection“ mode)
- Users can define the value of overtoad to decide when it
should cut off the power of appliance
- Using a patent design to reduce the spark when users
turn on the appliance and extend appliance's lifetime.
I Show the power consumptions of electronic appliance
that plug into this products
- Calculate the cost of power consumed in time periods 01
hour, day, week, month and year,
- Display the values of the measurements on the remote
site.
I Support electronic appliance with maximum loading of
1 wow.
I Control OnlOlf function manually with knob button, or
remote control by PC equipped with Z—Wavea certified
USB dongle, or by Home gateway
I Simpty plug in the wall outlet and attach the electronic
appliance.
I Fully compatible with any ZAWaveD certified devices.
I Act as a wireless signal repeater to ensure the intended
destination is received
I All products other than this product itself are sold
separately,
Package contents
I Power Monitor Switch x1
I User's Manual x1
Connection diagram
The illllSIIaliolIS below show me applimiion 0' PM! Manila! switch
at Mme or omee. Note mat this diagram is an example only‘ The
applicah'ou may he umaeul 1mm me auual conditims.
Product overview
II Switch Button
I Press to turn the connected devtce on or of!
I Indicate the status of connedlon or operatlon For
more detalls of Indicator. refer to LED Indicator
chapter
I Press to Include or exclude a Z-Wave" network,
a Z-Wave" Enabled Outlet
Thls outlet IS used to plug in the device you Wish to
monitor, such as a lamp DO NOT exceed the loading
of wattage more than 1600W when connecting to an
electronic appliance
Plug
Plug the Power Monltor SWItch Into any available wall
outlet
Basic operation
Include to or Exclude from a Z-Wave”
Network
Inclusion: Add a LWaveO enabled device to join a
Z-Wave° network.
Exclusion: Disconnect a Z-Wavea enabled device from
the network
Note: Make sure a Z-Wavea remote controller has been
installed and included to an available LWaveO network
before jalning the Power Monitor Switch. Not all Z-Wave
8enabled remote controllers have the same installation
process Actual instrucu'ons may vary, it depends on the
software that Z-Wave's controller provided.
1 Plug the Power Monitor
Swnch Into a desired
location
2. Press the  button
to include a Z-Weve‘3
network,
3 Once the Power Monitor Switch has been detected. the
confirm information Will display on the controller’s panel
or utility sofiware.
10
e r
4 To exclusion the Z»Wave° network, operate the echuSJon
procedure lrom your controller first. and then press
 button on the Power Monitor Switch
Getting started
1. Include the Power Monitor Switch to an available Z-Wave
network. For more details, reler to Include to or Exclude
from a Z-Wave" Network chapter,
2 Configure the Power Monitor SWItch to a speofic button
or other else on the controller's panel or utility software.
Refer to the conuoller‘s instruction manual for more
details,
3. Plug the electric appliance
that you desire to detect the
electric current, voltage or
power consumption
Note: The protection mode will be enabled automatically if
the power loading is exceeded 1600 watts For more details,
refer to the chapter of Overload protection,
1‘
% if
4A The Power Monitor Switch will become a lime bit hol
which is normal aner using a while,
5, To tum off the appliance which has been plugged on the
Power Monitor Snitch. pressing the  bunon
directly. Alternatively, tum off it from Z»Wave‘9 remote
controller or Z-Wave° utility on the PC.
12
Advanced operation
Association
Assoolation:
Define the relationship between devices afterjoining to
27Waven network Device can be assigned as master!
slave, and the slave can be controlled by the master
In a LWave network, the Power Monitor Swrtch can be
associated With a master deVIce (controller) which regard
as the upper group In this upper group, the Power Monitor
Switch can be used as a bridge to transmit the commands
from master to remote a lower group To achieve the
remoting, setup the association using Z-Wavee controller
or utility sottware The supported amount at assoaated of
associated appliances In the upper group Is depending on
your controller, For more detailed Z~Wave commands, refer
to controllers or utility software users manual,
1 Associate the Power Monitor Swrtch with a controller for
upper group, and other appliances for lower group
2 Include the lower group under the Power Monitor Swnch
The supported appliances in the lower group is up to 5,
13
3. Once the setup is completed, you can:
3-1, Turn on or ofi the appliances in the lower group
through the Power Monitor Switch by the controller
32. Press <8witch> button directty on the Power Monitor
Switch, and all devices associated with the Power
Monitor will be tumed on or of! simultaneously,
Association diagram
— : Lowergmup
I—|—|
WWW Wiflilmawm,
I4
Overload protecfion
Factory default
The Power Monnor Swncn has self-control function which
wrll remind and cut the power automancally i! \he power is
exceeds 1600W
3000W Cuts the power of! Immediately
2500—2999W Cans firepower 0" one! 3 seconds
2200~2499W Cuts the power on afler 10 seconds
2000~2199W cuts the power off mar 30 seconds
1800~1999W Cuts the power 011 afler 1 minute
1700-1799W Cuts me powerofi after 10 mirures
1601—1699W Curs me power 011 afler 30 mlnmes
Note: During me warnlng period beYore the power of", the
Power Monrtor Swrmh will work normally once reducing the
power consumption under 1600W
15
User definition
Except the default settings of overload protection, the Power
Monitor Switch allows user to add other protection modes
up to 5 from Z-Wave“i compatible utility software Reter to
the descriptions below to enmr or adjust the parameters to
the corresponding items on the controllers application,
1 s 5 4 3 z I | o
mmm Class = COMMAND_CLASS_CONFIGURATION
command = CONFIGURATION_SET
Parameter Nunber
Enable Reserved I 0 0
Configuration Value 1
Configuration Value 2
Configuration Value 3
Configuration Value 4
_£3_
I Parameter number: Specify the number of ovefload
protection between 15'
I Enable: Enable (1) or disable (0) the overload
protection you have set in the utility software,
I site: Payload size
I Configuration Value (payload data):
Value 1: Set the value of watt (hiebyte)
Value 2: Set the value of watt (lowbyte)
Value 3: Set the value of shutdown time (hiebyte)
Value 4: Set the value of shutdown time (lowebyte)
—C7—
16
4% i—
Command classes
Command class is a programming protocol which allows the
Power Monitor switch to communicate with other compatible
Z»WaveB devices, To program the Power Monitor Switch,
choose one of the command classes below, and then adjust
the parameters, For more detailed configurations, refer to
the controllers instruction manual,
I COMMAND_CLASS_MULTI_CHANNEL
l COMMANDicLAssiBASIC
I COMMAND_CLASS_SENSOR_MULTILEVEL
l COMMAND_CLASS_ASSOCIATION
I COMMANDicLAssiMElERiva
I COMMAND_CLASS_CONFIGURATION
l COMMAND_CLASS_VERSION
I COMMANDiCLASS,MANUFACTURER,SPECIFIC
rim ‘Cntmlz manlwmmcnmmlnmnmgm
Cumin-d CUMMAIID,CLA§jltSlC v
Clue-
5mm 1—way: ;
vm [551— Sal
Note: The utility interlace shown here is an example, The
actual interface 0! utility may vary due to the dilferent LWave
l'contmller provider,
17
7i 4%
_J 4% L_
LED indicator
Refer to me table below In see the status of LED lights,
‘w
- Ligh‘s up: D - Lights off: . - Flashing: d
———
Poweron Q
Power off . .
Inclusion “In“
Exclusion é
Transmitting I Receiving I “u.
Including I Excluding 0
Over loading ‘0"
18
Addition information
Z-Wave"
Z—Wave' is a slate-ot—the—art wireless technology used as a
standard for wireless home control. It is a nextgeneration
wireless ecosystem that lets all your home electronics talk
to each other, and to you, via a controller or gateway, It uses
simple, reliable, lowipower radio waves that easily travel
through walls, floors and cabinets. All products featuring the
Z—Wave' logo are certified to work with one another
Wireless range
The Power Monitor Switch is made wireless by ZWave
Otechnology, Typically, the transmission distance is
approximately 100 feet (30m) When installmg the module
consider an open area with little obstruction for the best
signal and penormance, Avoiding the obstnrction between
the module and controller may make a positive efiect on
wireless performance and range.
19
Regulatory compliance
FCC conditions
This equipment has been tested and found to comply with
Part 15 Class B at the FCC Rules, Operation is subject to
the following two conditions:
(1) This device may not cause harrnlul interterence
(2) This device must accept any interference
received and Include Interference that may
cause undesired operation
WEEE information
For EU (European Union) member users: According to
the WEEE (Waste electrical and electronic equipment)
Directive, do not dispose of this product as household
waste or commercial waste. Waste electrical and electronic
equipment should be appropriately collected
and recycled as required by practices
established for your country For intorman'on on
recycling of this product. please contact your
local authorities, your household waste disposal
servrce or the shop where you purchased the _
product,
a r—
Specification
lla m D
Protocol Z-Wave'
nodule Type Plug connection
Power Monltor Type: Tme RMS
Range Volage 9WAC~120VAC
Watt ,1W~1600W (cont)
Cun'ent 0.001 A~1 5A
Max load: 1600W
LED Indicator Bicolor LED (Green / Red)
Switch On I Off] Inclusion I Exclusion button
Frequency 908042MHz (US)
‘ Operatlnn Rang Up to 100 feet (30m) ‘
Dan m 40kbps
Application lndoot use
Working Opening Tempsratlla: 0-40!)
Environment Stuage Temperature: -10~80"C
Dimensions Approx, 101 x 69 x 40mm (exclude the
(LxWxH) height of wall outlet plug)
Housing PC8600
Flame Class UL 94 V4)
Colllplllllce FCC, UL
2|
nae l—
lecmmumcauon Commlulon mm sun-mm
manummmwwmwcmmmmhm-Chuamoulded”.gum-m
hPln15dlMFCCRum.mmomwmmr¢mmmmmhml
mmn-mlm.Meqummwm. HIGH, mam navel-WWW
mmmmmmwn-mmmmwm,m-yauummmmem
mndammiemm mm,mnmmmtmnermwlmmhnmmr
mull-non umnuwlmammmmmmmbumm,mmm
bedammhedbylmmeoumaflmdon.memnenmeomuynmums
nmmhymwmamflwmm
-Rwlovmouteme renting Imam.
unmannepammweoumlwmmv
mamamuqmnmwmmmammammmmmmmm mallow.
-Cmmuuluwmemnwmwwcmmluheb
FCCCquon:
mmcuwm-lmP-n ISM“ FCC Rm]. W IIWNMWM WWI
(urinaememymuuehumu meg-runway“: Mwmymefle'me
neeivod‘ Mud-lg Wm Mm" auto mac-ind operation.
Non-modificnion Statement:
Changes or madmamns m uprasstv approved try me party responsulfle for mmplianu cuuld void lh: user's
amnomy to upon“ an equipmm.
FCC Rndclion Exposure Sumner“:
This equipment complies with FCC radiafion exposure Inuit: set forth fof an unoouuolied environment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 21
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:77e437c6-c99c-4536-ac59-7b08e94d62c7
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2012:10:30 14:31:53+08:00
Modify Date                     : 2012:10:30 14:31:53+08:00
Document ID                     : uuid:6811c20b-323b-47ec-8cdb-b6d7e0193131
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools