Good Way Technology WM2210 RF PRESENTER User Manual USERS MANUAL

Good Way Technology Co., Ltd. RF PRESENTER USERS MANUAL

USERS MANUAL

    2.4GHz RF Wireless Presenter  User’s Manual
 ABOUT THIS MANUAL This manual is designed for use with the 2.4GHz RF Wireless Presenter. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. SAFETY INSTRUCTIONS Always read the safety instructions carefully:   Keep this User’s Manual for future reference   Keep this equipment away from humidity   If any of the following situation arises, get the equipment checked by a service technician: z The equipment has been dropped and damaged. z The equipment has obvious sign of breakage. z The equipment has not been working well or you cannot get it to work according to the User’s Manual. COPYRIGHT This document contains proprietary information protected by copyright. All right are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.   TRADEMARKS All trademarks and registered trademarks are the property of their respective owners or companies.     CAUTION:Laser radiation Do not stare into beam!  i
2.4GHz RF Wireless Presenter User’s Manual Table of Contents 1. Introduction .......................................................................................................3 Features..............................................................................................................3 Package Contents...............................................................................................4 System Requirement ..........................................................................................4 2. Installation .........................................................................................................5 3. Using the Presenter ..........................................................................................6 Step 1. Open the battery cover on the back and insert the battery.....................6 Step 2. Take out the USB receiver attached on the top and plug it into an available USB port  ............................................................................................6 Step 3. The function of the keys .........................................................................7   4. Specifications....................................................................................................8 5. Regulatory Compliance....................................................................................9 FCC Conditions ..................................................................................................9 CE.......................................................................................................................9 WEEE Information ..............................................................................................9   ii
2.4GHz RF Wireless Presenter User’s Manual 1. Introduction This 2.4GHz RF Wireless Presenter will offer you increased control for more effective presentations. Please read this manual to learn valuable information about the proper use and installation. With this Wireless Presenter, you don’t need to stand beside your computer or have an additional person click the slide for you, nor do you need to aim at the receiver of the remote control. It is a special design presentation tool, its USB receiver is designed slim enough to snap into the main body of the Wireless Presenter. It is the mixed of RF wireless control of PowerPoint keyboard shortcuts and the laser point. This device enables the user to control presentation slides wirelessly up to 100 feet (30 meters) away indoors, while the laser pointer up to over 50 meters from the target. It is a USB plug-and-play device with no additional software required. The safety switch provides protection against unintentional laser beam into human eyes. Features   USB receiver stores conveniently inside the remote   Up to 100ft of wireless range   Built-in laser pointer   Compatible with most presentation applications including Microsoft PowerPoint and Apple Keynote   Next slide, previous slide buttons  Screen-hide button   No software required     Plug & play  3
2.4GHz RF Wireless Presenter User’s Manual Package Contents Before installation, please check the items in the package. The package should contain the following items:   2.4GHz RF Wireless Presenter    x1 (With USB receiver)     AAA Battery                   x1   User’s Manual            x1  System Requirement  Operating Systems: Windows 2000, XP & Vista; Mac OS 9.x and up   The Wireless Presenter interface with the computer hardware is through the USB dongle             4
2.4GHz RF Wireless Presenter User’s Manual 2. Installation  USB Receiver Next Slide / Page Down Previous Slide / Page Up Laser Beam Presenter Power On/Off Switch Alt + Tab Black / White Screen Start Slide (F5) / Esc Battery Chamber          5
2.4GHz RF Wireless Presenter User’s Manual 3. Using the Presenter  Step 1: Open the battery cover on the back and insert the battery.  Notes on battery     Do not insert battery into the Mini Presenter in the wrong direction.     Do not leave dead or exhausted battery in the Mini Presenter.     If you do not use the Wireless Presenter for a long period of time, remove the battery to avoid possible damage from battery corrosion.     If the Wireless Presenter does not function correctly or if the operating range becomes reduced, try to replace the battery with new one.      Step 2: Take out the USB receiver attached on the top and plug it into an available USB port.  Plug the USB Receiver into your computer’s USB port. You may also use the spare USB port on your keyboard or a USB port on a hub connected to your computer.    You do not need to turn off your computer before connecting or disconnecting a USB device.  The operation system identifies the receiver, prompts” USB Human Interface Device” and begins installation automatically. Please follow the instruction on the screen to complete the installation procedure.        6
2.4GHz RF Wireless Presenter User’s Manual Step 3: The function of the keys  Key Function  Click to start the slide show / exit the slide show  Next Slide (Page Down)  Previous Slide (Page Up)  Alt + Tab  Turn the presentation screen to all black □ Laser beam     7
2.4GHz RF Wireless Presenter User’s Manual 4. Specifications Programmable Data Rate  Up to 500 Kbps Compliance  USB1.1  &  USB 2.0 Operating Systems  Windows 2000, XP & Vista Mac OS 9.x and up RF Band  2.4 GHZ Max Distance  100ft Power Supply  1 AAA 1.2V battery USB RF Dongle  USB Type A Plug Size (Lx W x H)  105 x 30 x 19.5 mm Housing Material  Plastic (ABS) weight  120g Operation temperature  10 ~ 40 degree Storage temperature  -10 ~ 80 degree Certification  FCC, CE   * Specification is subject to change without notice    8
2.4GHz RF Wireless Presenter User’s Manual 5. Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation.   Important! Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Use an approved phone set. CE This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B WEEE Information For EU (European Union) member users:   According to the WEEE (Waste electrical and electronic equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product.                                 9

Navigation menu