Goodman Mfg Ss Gme8 Users Manual

SS-GME8 to the manual 4d70d931-ee4d-4152-aac5-19692a6f731e

: Goodman-Mfg Goodman-Mfg-Ss-Gme8-Users-Manual-429698 goodman-mfg-ss-gme8-users-manual-429698 goodman-mfg pdf

Open the PDF directly: View PDF .
Page Count: 8

Download
Open PDF In Browser	View PDF

GME8 S eries
Multi-Position, Dual$aver
Multi-Speed Gas Furnace

80% AFUE
Heating Input: 70,000–115,000 BTU/h

Standard Features

•	 Dual-diameter tubular heat exchanger
•	 Two-stage gas valve that allows installer to
turn on two-stage operation with the flip 	
of a dipswitch
•	 Energy-efficient circulator motor (EEM)
•	 115V Silicon Nitride igniter designed for long igniter life
•	 Furnace control board with self-diagnostics, color-coded low-voltage terminals, and provisions for electronic
air cleaner and 24-volt humidifiers
•	 Control board stores the last five diagnostic codes in
memory; simple push-button activation outputs the
fault history to a flashing red LED
•	 Low constant fan allows homeowner to activate the
low heat speed to efficiently circulate air throughout
the home.
•	 Self-adjusting feature automatically adjusts furnace to
high- or low-stage operation based on outside temperature without an outdoor temperature sensor
•	 All models comply with California NOx emissions standards

Cabinet Features

•	 Fully insulated, heavy-gauge steel cabinet with durable
baked-enamel finish
•	 Foil-faced insulation lines the heat exchanger
•	 Designed for multi-position installation: upflow, 	
horizontal left or right
•	 Removable bottom for side- or bottom-return applications
•	 Convenient left or right connection for gas/	
electric service
•	 Top gas connection on most models
•	 Coil and furnace fit flush for most installations

™

Contents

Nomenclature ................................................................................................... 2
Product Specifications ................................................................................. 3
Dimensions ......................................................................................................... 4
Airflow Data ........................................................................................................ 5
Wiring Diagrams .............................................................................................. 6
Accessories .......................................................................................................... 8

*   Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the Lifetime Heat
Exchanger Limited Warranty (good for as long as you own your home), 10-Year Unit Replacement Limited Warranty and
10-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is
not required in California or Québec.

SS-GME8

www.goodmanmfg.com

11/10

Supersedes 3/10

Product Specifications

Nomenclature
	
  

G

M

E

8

045

4

B

X

AA

1

2

3

4,5

6,7,8

9

10

11

12,13

Brand
G Goodman®	
  Brand
or	
  Dis0nc0ons™

Revisions
Major	
  and	
  
Minor	
  Revisions

Airflow	
  Direc2on
C Downflow/Horizontal
D Dedicated	
  Downflow
H High	
  Airflow
K Dedicated	
  Upflow
M Upflow/Horizontal
Descrip2on/Motor
V Two-­‐Stage/Variable-­‐speed
H Two-­‐Stage/Mul0-­‐speed
S Single-­‐Stage/Mul0-­‐speed
E Two-­‐Stage/EEM	
  Motor
AFUE
95 95%
9 93%+
8 80%

NOx
N Natural	
  Gas
X Low	
  NOx
Cabinet	
  Width
A	
  	
  	
  14”
B	
  	
  	
  17½”
C	
  	
  	
  21”
D	
  	
  	
  24½”

3	
  	
  	
  1200

Maximum	
  CFM	
  @	
  0.5”	
  ESP
4	
  	
  	
  1600
5	
  	
  	
  2000

045:	
  45,000
070:	
  70,000
090:	
  90,000

MBTU/h
115:	
  115,000
140:	
  140,000

2	www.goodmanmfg.com	
SS-GME8

Product Specifications

Specifications
GME8
0703BXC*

GME8
0905CXC*

GME8
1155CXC*

70,000

90,000

115,000

Output¹

56,000

72,000

92,000

LP Output¹

48,000

64,000

80,000

80

80

80

Performance Data
Input¹

AFUE²
Tons AC @ 0.5” ESP

3

5

5

20 - 50

35 - 65

35 - 65

10 X 8

10 X 10

10 X 10

1/2

1

1

Speed

4

4

4

Vent Diameter³

4

4

4

Temperature Rise Range (°F)
Circulator Blower
Size (D x W)
HP

No. of Burners

3

4

5

290

480

480

Min. Circuit Ampacity⁴

8.2

14.8

14.8

Max. Overcurrent Protection⁵

15

15

15

Ship Weight (lbs)

130

163

167

Disposable Filter (in²)
Electrical Data

¹	
²	
³	

	

4

	

5

Natural Gas BTU/h: for altitudes above 2,000’, reduce input rating 4% for each 1,000’ above sea level. Low-fire rate is
75% of high-fire rate.
DOE AFUE based upon Isolated Combustion System (ICS).
Vent diameter may vary depending upon vent length. Refer to the latest editions of the National Fuel Gas Code NFPA
54/ANSI Z223.1 (in the USA) and the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2 (in
Canada).
Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
Refers to maximum recommended fuse or circuit breaker size; may use fuses or HACR-type circuit breakers of the same
size as noted.

Notes
•	 All furnaces are manufactured for use on 115 VAC, 60 Hz, single phase electrical supply.
•	 Gas Service Connection ½” FPT
•	 Important: It is required to size overcurrent protection device and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.

SS-GME8 	

www.goodmanmfg.com	

3

Product Specifications
PRODUCT DIMENSIONS
Dimensions

AMVC8/GMVC8_____X*

Alt. Gas Inlet

Alt. Gas Inlet

Alt. High Voltage

High Voltage Inlet
Low Voltage

Alt. LowVoltage

Model
GME80703BXA
GME80905CXA
MODELS
GME81155CXA
AMVC80704BX**
GMVC80704BX**
AMVC80905CX**
AMVC81155CX**
aterialsGMVC80905CX**
GMVC81155CX**

Minimum Clearances to Combustible M
Sides

Rear

1

0

A

B

17½”

16”

21”
A
21”

19½”
B
19½”

17-1/2

16

21

19-1/2

All dimensions are in inches.
Front
Bottom

3

C

Vent
SW

B

6

1

Top
1

C = If placed on combustible floor, the floor MUST be wood ONLY.
Notes:
•	 For servicing or cleaning, a 24” front clearance is recommended.
•	 Unit connections (electrical, flue, and drain) may necessitate greater clearances than the minimum clearances listed above.
•	 In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater.
•	 Refer to the appropriate USA and Canadian codes:
◊	 In the USA: the National Fuel Gas Code NFPA 54 / ANSI Z223.1
◊	 In Canada: the Canada National Standard of Canada, CAN/CSA B149.1 and CAN/CSA B142.2

8

4	www.goodmanmfg.com	
SS-GME8

Product Specifications

Airflow Data
(CFM & Temperature Rise vs. External Static Pressure)
Model

GME8
0703BXC*

GME8
0905CXC*

GME8
1155CXC*

Motor
Speed

Tons
AC¹

External Static Pressure, (Inches Water Column)
0.1
CFM

0.2
Rise

CFM

0.3

0.4

0.5

Rise

CFM

Rise

CFM

Rise

CFM

Rise

0.6

0.7

0.8

CFM

CFM

CFM

T1

1½

875

59

793

65

736

70

674

77

592

88

556

509

460

T2

2

1,032

50

965

54

914

57

861

60

810

64

756

712

659

T3

2½

1,217

43

1,153

45

1,098

47

1,051

49

1,009

51

964

918

877

T4

3

1,365

38

1,313

39

1,268

41

1,221

42

1,172

44

1,129

1,086

1,054

T5

3½

1,549

33

1,505

34

1,460

36

1,420

37

1,378

38

1,350

1,305

1,268

T1

2½

1,268

53

1,198

56

1,151

58

1,092

61

1,041

64

988

932

883

T2

3

1,362

49

1,305

51

1,261

53

1,212

55

1,170

57

1,121

1,074

1,021

T3

3½

1,576

42

1,519

44

1,473

45

1,426

47

1,398

48

1,341

1,290

1,252

T4

4

1,755

38

1,711

39

1,657

40

1,627

41

1,579

42

1,548

1,502

1,463

T5

5

2,183

31

2,128

31

2,094

32

2,060

32

2,014

33

1,992

1,944

1,847

T1

3

1,466

58

1,415

60

1,357

63

1,306

65

1,248

68

1,202

1,144

1,088

T2

3½

1,642

52

1,596

53

1,552

55

1,499

57

1,449

59

1,388

1,352

1,306

T3

4

1,750

49

1,750

49

1,707

50

1,667

51

1,610

53

1,574

1,531

1,486

T4

4

1,870

46

1,805

47

1,782

48

1,737

49

1,701

50

1,656

1,606

1,571

T5

5

2,297

37

2,297

37

2,224

38

2,106

40

2,014

42

1,896

1,813

1,669

¹ @ 0.5” ESP
Notes
•	 CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer. If the furnace requires two return filters,
this chart assumes both filters are installed.
•	 All furnaces ship as high-speed cooling and medium-speed heating. Installer must adjust blower cooling and heating speed as needed.
•	 For most jobs, about 375 - 400 CFM per ton when cooling is desirable.
•	 INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE.
•	 This chart is for information only. For satisfactory operation, external static pressure should not exceed value shown on the rating plate.
•	 The above chart is for U.S. furnaces installed at 0-2000 feet. At higher altitudes, a properly derated unit will have approximately the same
temperature rise at a particular CFM, while ESP at the CFM will be lower.
•	 Factory Motor Speed Setting: T1 = 1st Stage Ht, T2 = 2nd Stage Ht, T5 = Cooling
•	 Tempertaure rise data is based on 2nd-stage heat. First-stage heat is 75% of rise indicated above.

SS-GME8 	

www.goodmanmfg.com	

5

Wiring is subject to change. Always
refer to the wiring diagram or the
unit for the most up-to-date wiring.

⚠
WARNING

High Voltage: Disconnect all power before servicing or installing this unit. Multiple power
sources may be present. Failure to do so may cause property damage, personal injury, or death.

⚡

Product Specifications

Wiring Diagram with Honeywell Valve

6	www.goodmanmfg.com	
SS-GME8

8

Product Specifications
( 6.000 )

Wiring Diagram with White-Rodgers Valve
WARNING:DISCONNECT POWER BEFORE
SERVICING.WIRING TO UNIT MUST BE
PROPERLY POLARIZED AND GROUNDED.

INTEGRATED
CONTROL MODULE

HUMIDIFIER
XFMR (6)

GND

GND (8)

24 VAC
HUMIDIFIER

C2

MVC (9)

HI

MVH (12)

9

5

6

1

2

3

WH

BL

FUSE
SEE NOTE 6

BR

FS

RD

RD

MANUAL RESET ROLLOUT
LIMIT CONTROL(S)
(SINGLE CONTROL ON SOME MODELS)
24 VAC

XFMR-H

HOT SURFACE
IGNITER
IGN

24V
BL

CIRCULATOR
BLOWER

BR

115V

WH

XFMR
WH
BK

ID
BLWR

IND

COOL-H

BK

WH

LINE-N
JUNCTION BOX

WH

WH

YL
PRIMARY LIMIT

PRESSURE
SWITCH

YL

YL
YL
WH
BK
BL
WH

PM C
1
2

HI
3

GND
LINE H

FLAME
SENSOR

STEADY ON = NORMAL OPERATION
OFF

= CONTROL FAILURE

1

1 FLASH =

SYSTEM LOCKOUT (RETRIES/RECYCLES EXCEEDED)

2 FLASHES = PRESSURE SWITCH STUCK CLOSED
3 FLASHES = PRESSURE SWITCH STUCK OPEN

4

4 FLASHES = OPEN HIGH LIMIT

5

5 FLASHES = FLAME SENSE WITHOUT GAS VALVE

6

6 FLASHES = OPEN ROLLOUT OR OPEN FUSE

7

7 FLASHES = LOW FLAME SIGNAL

8

8 FLASHES = CHECK IGNITER OR IMPROPER GROUND

C

RAPID FLASHES = REVERSED 115 VAC POLARITY/VERIFY GND

HI VOLTAGE (115V)
HI VOLTAGE FIELD
JUNCTION
TERMINAL

INTERNAL TO
INTEGRATED CONTROL
PLUG CONNECTION

EQUIPMENT GND
FIELD GND
FIELD SPLICE
SWITCH (TEMP.)
IGNITER
SWITCH (PRESS.)
OVERCURRENT
PROT. DEVICE

NOTES:
1. SET HEAT ANTICIPATOR ON ROOM THERMOSTAT AT 0.7 AMPS.
2. MANUFACTURER'S SPECIFIED REPLACEMENT PARTS MUST BE USED WHEN SERVICING.
3. IF ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THE FURNACE MUST BE REPLACED, IT MUST BE REPLACED WITH
WIRING MATERIAL HAVING A TEMPERATURE RATING OF AT LEAST 105 °C. USE COPPER CONDUCTORS ONLY.
4. BLOWER SPEEDS SHOULD BE ADJUSTED BY INSTALLER TO MATCH THE INSTALLATION REQUIREMENTS SO AS TO
PROVIDE THE CORRECT HEATING TEMPERATURE RISE AND THE CORRECT COOLING CFM. (SEE SPEC SHEET FOR AIR
FLOW CHART)
5. UNIT MUST BE PERMANENTLY GROUNDED AND CONFORM TO N.E.C. AND LOCAL CODES.
6. TO RECALL THE LAST 5 FAULTS, MOST RECENT TO LEAST RECENT, DEPRESS SWITCH FOR MORE THAN 2 SECONDS
WHILE IN STANDBY(NO THERMOSTAT INPUTS).

A
-

2

INITIAL R

www.goodmanmfg.com	

REV ZONE

SS-GME8 	

ECN

0140F00643 REV. A

LOW VOLTAGE (24V)
LOW VOLTAGE FIELD

0904051

PK PINK
BR BROWN
WH WHITE
BL BLUE
GY GRAY
RD RED

TO 115 VAC/ 1/60HZ
POWER SUPPLY WITH
OVERCURRENT PROTECTION
DEVICE

3

2
3

COLOR CODES:
YL YELLOW
OR ORANGE
PU PURPLE
GR GREEN
BK BLACK

N

4

ROLLOUT LIMITS
(SINGLE CONTROL ON SOME MODELS)

GND

LINE-N

INDUCED DRAFT
BLOWER
PU

L

JUNCTION
BOX

2 STAGE
GAS VALVE

PU

DISCONNECT

BK
WH

PU

0

WARNING:
DISCONNECT POWER
BEFORE SERVICING.
WIRING TO UNIT
MUST BE
PROPERLY
POLARIZED
AND GROUNDED.

TO 115VAC/ 1
Ø /60 HZ POWER SUPPLY WITH
OVERCURRENT PROTECTION DEVICE

BR

HOT
SURFACE
IGNITER

DOOR
SWITCH

C

OR

RD

5

( 10.750 )

RD

EAC-N

LINE-H

24 VAC
HUMIDIFIER
NO

CIR-N

ELECTRONIC
AIR CLEANER

BURNER COMPARTMENT
DOOR SWITCH
SWITCH LOCATED IN BLOWER
COMPARTMENT ON SOME MODELS

CIRCULATOR
BLWR

HI -H
AT
HE

EAC-H

BLOWER COMPARTMENT

IND-N

HE LO
AT
-H

15 PIN PLUG
ON SOME MODELS

GR

IGN-N
INTEGRATED CONTROL MODULE

INTEGRATED CONTROL MODULE

WH (N)

BK

BK (HI)
BL (MED HI)
OR(MED)
RD (MED LOW)
YL (LOW)

PARK

RD

6

FP

EAC-H

BK

XFMR-N

115 VAC
FLAME SENSOR

LO HEAT-H

OR

PU

WH

LINE-H

RO1 (5)

40 VA
TRANSFORMER

COOL-H

LINE NEUTRAL

YL

YL

1

XFMR-H

AUTO RESET
PRIMARY
LIMIT
CONTROL

RO2 (11)

BR

PU
2

NO

C

HLO (1)

R

XFMR (3)

BL

RD

W

HI HEAT-H

INTEGRATED
CONTROL MODULE

AUXILIARY
LIMITS

PS (10)
PSO (4)
TO
MICRO HLI (7)

Y

⚡

12

8

4

G

High Voltage: Disconnect all power before servicing or installing this unit. Multiple power
sources may be present. Failure to do so may cause property damage, personal injury, or death.

11

7

DLY
STG
2N D
MODE
HT O
FF D
LY

DIAGNOSTIC
LED

10

5 MIN
2 STG
100 SEC

WARNING

Y

AUTO
1 STG
150 SEC

⚠

W

Wiring is subject to change. Always
refer to the wiring diagram or the
unit for the most up-to-date wiring.

R

7

G

ID BLOWER
PRESSURE
SWITCH

AUXILIARY
LIMIT CONTROLS
24V THERMOSTAT CONNECTIONS

C

M1

MVL (2)

C

GAS
VALVE

7

Product Specifications

Dual$aver Configuration & Operation
Dual$aver™
This furnace is capable of the following heating modes:
•	 Single Stage (Factory Setting)
•	 Modified Two-Stage
»» Fixed 5-Min Low Stage
»» Auto Time (1-12 Min) Low Stage
Start
Call for Heat
Safety Circuit Check
Start Furnace
in Low Stage
Low-Heat Blower
Delay Time (5 Min)

or Delay Time (1-12 Min)

Gas Valve Switch
to 2nd Stage
Blower Switch to
Hi Heat Operation
T-Stat Satisfied

Accessories
Model

Description

GME8
0703BX

GME8
0905CX

GME8
155CX

LPM-05

LP Conversion Kit (Springs & Orifice)¹

√

√

√

LPM-06

LP Conversion Kit (Springs & Orifice)²

√

√

√

FSRKG-14/17/21/24

Noise Reduction Kits

√

√

√

MVK-01³

Masonry Vent Kit

√

√

√

HA02

High-Altitude Natural Gas Kit

√

√

√

AFE18-60A

Fossil Fuel Kit

√

√

√

¹	 White-Rodgers valves only
²	 Honeywell or White-Rodgers valves
³	 Upflow applications only

Goodman Manufacturing Company, L.P., reserves the right to discontinue, or change at any time, specifications or designs without 	
notice or without incurring obligations. © 2010  •  Goodman Manufacturing Company, L.P.  •  Houston, Texas  •  Printed in the USA.

8	www.goodmanmfg.com	
SS-GME8



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2011:02:23 08:18:21-06:00
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2011:02:23 08:19:30-06:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37
Metadata Date                   : 2011:02:23 08:19:30-06:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 9383 bytes, use -b option to extract), (Binary data 6807 bytes, use -b option to extract)
Version ID                      : 1
Instance ID                     : uuid:5aaf3c64-7fca-fe42-80f1-800337235dcb
Document ID                     : xmp.did:C71E3A445554DE11B45E96B7C8BD4992
Original Document ID            : adobe:docid:indd:9da6b164-46b8-11dd-beea-c00a5e5aa377
Rendition Class                 : proof:pdf
Contributor Resources Document ID: uuid:572e8c4a-2973-415d-b86e-67f7129ccfdf
Derived From Instance ID        : xmp.iid:C61E3A445554DE11B45E96B7C8BD4992
Derived From Document ID        : adobe:docid:indd:9da6b164-46b8-11dd-beea-c00a5e5aa377
Derived From Original Document ID: adobe:docid:indd:9da6b164-46b8-11dd-beea-c00a5e5aa377
Derived From Version ID         : 1
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:5C46821BDF08DE11B825D2B5A14E4174, xmp.iid:5D46821BDF08DE11B825D2B5A14E4174, xmp.iid:89072C62FE08DE11B825D2B5A14E4174, xmp.iid:8A072C62FE08DE11B825D2B5A14E4174, xmp.iid:494824E58B0ADE11927CDE30C796A4B9, xmp.iid:165410B3900ADE11927CDE30C796A4B9, xmp.iid:F857914C7E18DE118F24A890A631D68E, xmp.iid:38F217D08D18DE118F24A890A631D68E, xmp.iid:3BF217D08D18DE118F24A890A631D68E, xmp.iid:5DDCE12C9518DE11AD13F613E3A7EE22, xmp.iid:98BE195AA11FDE11A8B4EB4D032FAA3B, xmp.iid:C6C54C03C239DE1195EBCF52171D7274, xmp.iid:1F7F053C9C44DE11A652D204636CAD5D, xmp.iid:C61E3A445554DE11B45E96B7C8BD4992, xmp.iid:C71E3A445554DE11B45E96B7C8BD4992, xmp.iid:C81E3A445554DE11B45E96B7C8BD4992, xmp.iid:C91E3A445554DE11B45E96B7C8BD4992, xmp.iid:2831939C7354DE11B45E96B7C8BD4992, xmp.iid:42B129498456DE11927A968271174CFC, xmp.iid:43B129498456DE11927A968271174CFC, xmp.iid:0D2551808857DE11BF65E8F74FFA71F1, xmp.iid:0E2551808857DE11BF65E8F74FFA71F1, xmp.iid:0F2551808857DE11BF65E8F74FFA71F1, xmp.iid:102551808857DE11BF65E8F74FFA71F1, xmp.iid:112551808857DE11BF65E8F74FFA71F1, xmp.iid:4D7FC0A4435BDE11AA4AF85A406A96C4, xmp.iid:093BAEEF135DDE11A7D3BD0243C127EE, xmp.iid:C84DA693C960DE11B40DE46C81EFED2E, xmp.iid:044AAB1DDE60DE11A96EEF94B22AE1DA, xmp.iid:E0C6DA82867BDE11B99CC21D23FF716B, xmp.iid:E1C6DA82867BDE11B99CC21D23FF716B, xmp.iid:624100C94188DE119D6FC93B9BD8EC43, xmp.iid:634100C94188DE119D6FC93B9BD8EC43, xmp.iid:967D7EBB4988DE119D6FC93B9BD8EC43, xmp.iid:977D7EBB4988DE119D6FC93B9BD8EC43, xmp.iid:CEE59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:CFE59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:D0E59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:D1E59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:D2E59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:D3E59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:D4E59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:D5E59F1F5F8BDE119EEAFAAD596056D6, xmp.iid:BA1248D6668BDE11849FF8258D700D1E, xmp.iid:BB1248D6668BDE11849FF8258D700D1E, xmp.iid:BC1248D6668BDE11849FF8258D700D1E, xmp.iid:80E601CD7891DE11A4A1D3285DC7FB79, xmp.iid:774DDC3C7F9CDE11BA65A133D3FC2F87, xmp.iid:0A80117407206811910992B72DE7C2BE, xmp.iid:52B860BA28206811910992B72DE7C2BE, xmp.iid:53B860BA28206811910992B72DE7C2BE, xmp.iid:F87F11740720681195FEF9895D3E14DA, xmp.iid:F97F11740720681195FEF9895D3E14DA, xmp.iid:9A65903C13206811871FA03AA403E7E3, xmp.iid:9B65903C13206811871FA03AA403E7E3, xmp.iid:9C65903C13206811871FA03AA403E7E3, xmp.iid:9D65903C13206811871FA03AA403E7E3, xmp.iid:9E65903C13206811871FA03AA403E7E3, xmp.iid:9F65903C13206811871FA03AA403E7E3, xmp.iid:6ACB20771D206811871FB72FC1EB479A, xmp.iid:6BCB20771D206811871FB72FC1EB479A, xmp.iid:B538BF753D206811871FB72FC1EB479A, xmp.iid:B638BF753D206811871FB72FC1EB479A, xmp.iid:B738BF753D206811871FB72FC1EB479A, xmp.iid:B838BF753D206811871FB72FC1EB479A, xmp.iid:8DBF7DA41220681197A5F97839147C1E, xmp.iid:F92EACD10F2068118F629AE0B040A387, xmp.iid:FA2EACD10F2068118F629AE0B040A387, xmp.iid:078011740720681192B0BDA7F11580CC, xmp.iid:098011740720681192B0BDA7F11580CC, xmp.iid:0A8011740720681192B0BDA7F11580CC, xmp.iid:E0586F280F20681192B0BDA7F11580CC, xmp.iid:E1586F280F20681192B0BDA7F11580CC, xmp.iid:E2586F280F20681192B0BDA7F11580CC, xmp.iid:2AB5DEB2192068119457FA1A91FF079D, xmp.iid:2CB5DEB2192068119457FA1A91FF079D, xmp.iid:30B5DEB2192068119457FA1A91FF079D, xmp.iid:068011740720681192B09F85A4A0ABBE, xmp.iid:080F3274162068118DBBBC77FB350C35, xmp.iid:090F3274162068118DBBBC77FB350C35, xmp.iid:FA7F11740720681192B08148FF78DC2C, xmp.iid:4606CE5D3320681192B0912EBD2188DF, xmp.iid:1F23568E1520681180838B8564E9FEBC, xmp.iid:2023568E1520681180838B8564E9FEBC, xmp.iid:8E9A1F441220681180839A5860E882C4, xmp.iid:74804D790E2068118A6D878009D526EA, xmp.iid:EF9F79AF0E2068118A6D878009D526EA, xmp.iid:29475D1F1C2068118A6D878009D526EA, xmp.iid:A7F995BC182068118083D0B4B0012A80, xmp.iid:67D14DCF1B2068118083D0B4B0012A80
History When                    : 2009:03:04 14:03:01-06:00, 2009:03:04 14:03:01-06:00, 2009:03:04 15:26:02-06:00, 2009:03:04 15:27:05-06:00, 2009:03:06 14:46:50-06:00, 2009:03:06 14:52:26-06:00, 2009:03:24 10:37:46-05:00, 2009:03:24 11:11:46-05:00, 2009:03:24 11:34:06-05:00, 2009:03:24 12:05:32-05:00, 2009:04:02 12:36:21-05:00, 2009:05:05 17:16:57-05:00, 2009:05:19 13:25:21-05:00, 2009:06:08 12:55:49-05:00, 2009:06:08 12:55:50-05:00, 2009:06:08 13:02:48-05:00, 2009:06:08 13:03:26-05:00, 2009:06:08 16:43-05:00, 2009:06:11 08:35:04-05:00, 2009:06:11 08:36:06-05:00, 2009:06:12 14:56:32-05:00, 2009:06:12 14:59:29-05:00, 2009:06:12 15:00:11-05:00, 2009:06:12 15:04:59-05:00, 2009:06:12 15:10:04-05:00, 2009:06:17 09:19:14-05:00, 2009:06:19 16:02:12-05:00, 2009:06:24 09:37:57-05:00, 2009:06:24 11:43:16-05:00, 2009:07:28 09:59:16-05:00, 2009:07:28 10:01:42-05:00, 2009:08:13 15:28:12-05:00, 2009:08:13 15:28:52-05:00, 2009:08:13 15:45:23-05:00, 2009:08:13 15:48:24-05:00, 2009:08:17 13:52:33-05:00, 2009:08:17 13:59:36-05:00, 2009:08:17 14:08:25-05:00, 2009:08:17 14:16-05:00, 2009:08:17 14:22:31-05:00, 2009:08:17 14:26:19-05:00, 2009:08:17 14:33:56-05:00, 2009:08:17 14:34:42-05:00, 2009:08:17 14:47:46-05:00, 2009:08:17 14:55:51-05:00, 2009:08:17 14:57:22-05:00, 2009:08:25 08:11:28-05:00, 2009:09:08 09:06:17-05:00, 2009:09:29 13:20:18-05:00, 2009:09:29 13:22:22-05:00, 2009:09:29 13:23:27-05:00, 2010:01:12 08:45:46-06:00, 2010:01:12 08:47:57-06:00, 2010:03:04 08:51:54-06:00, 2010:03:04 09:01:39-06:00, 2010:03:04 09:04:57-06:00, 2010:03:04 09:18:49-06:00, 2010:03:04 09:19:49-06:00, 2010:03:04 09:33:04-06:00, 2010:03:24 13:03:21-05:00, 2010:03:24 13:39:45-05:00, 2010:03:24 14:00:01-05:00, 2010:03:24 14:00:34-05:00, 2010:03:24 14:02:01-05:00, 2010:03:24 14:03:04-05:00, 2010:03:25 09:01:30-05:00, 2010:03:30 09:44:40-05:00, 2010:03:30 09:46:20-05:00, 2010:05:17 08:26:33-05:00, 2010:05:17 08:36:30-05:00, 2010:05:17 08:39:59-05:00, 2010:05:17 08:53:41-05:00, 2010:05:17 09:24:04-05:00, 2010:05:17 09:28:02-05:00, 2010:06:16 09:48:27-05:00, 2010:06:16 10:15:59-05:00, 2010:06:16 10:49:14-05:00, 2010:06:29 14:26:59-05:00, 2010:11:01 15:54:31-05:00, 2010:11:01 15:56:25-05:00, 2010:11:02 07:53:21-05:00, 2010:11:04 13:32:09-05:00, 2010:12:15 15:48:53-06:00, 2010:12:15 15:48:53-06:00, 2010:12:21 09:33:45-06:00, 2011:02:09 13:45-06:00, 2011:02:09 13:46:31-06:00, 2011:02:09 15:22:42-06:00, 2011:02:11 12:00:17-06:00, 2011:02:11 12:22:17-06:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Doc Change Count                : 1389
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 8

EXIF Metadata provided by EXIF.tools