GOSAFE G-6S-3S GPS Tracker User Manual G6S UserMan

Gosafe Company Limited GPS Tracker G6S UserMan

User Manual

 G6S User Manual V1.6 Copyright©2013Gosafe
G6S User Manual 2ATTENTION! ⃞Do not disassemble the device. Do not touch before unplugging the power supply if the device is damaged, t he power supply cables are not isolated or the isolation is damaged. ⃞All wireless data transferring devices produce interference that may affect other devices which are placed nearby. ⃞The device may be connected only by qualified individuals. ⃞The device must be firmly fastened in the predefined location. ⃞The device is susceptible to water and hum idity. INSTRUCTIONS OF SAFETY ⃞This chapter contains inform ation on how to operate “G6S” safely. ⃞BY following these requirements and recommendations you will avoid dangerous situations. You must read these instructions carefully and follow the strictly before operating the device! ⃞The device uses a 8V- 32V DC power supply. The nominal voltage is 12V DC. It is advised to transport the device in an impact- proof package. ⃞Before usage, the device should be placed so that its LED indicators are visible, which show what status of operation the device is in. ⃞When connecting the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected. ⃞Before dismounting the device from the vehicle, the connection must be disconnected.
G6S User Manual 3LEGAL NOTICE Copyright © 2013 Gosafe All rights reserved. Reproduction, t ransfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Gosafe is prohibited. 1- Wire is a registered tradem ark of Dallas Semiconductor. Other products and company names mentioned herein may be tradem arks or trade names of their respective owners. INTRODUCTION The G6S Feature Rich Powerful GPS Tracker is the latest solution for track and trace applications and extreme level fleet management. G6S is designed for service providers, integrators, and enterprise customers to enhance mobile resources and improve their dispatch system; the G6S is a dependable quad- band GSM/ GPRS tracking device, delivering the key features fulfilling the most demanding applications: fleet management, insurance telemetric, dispatch, vehicle location and recovery, and m ore. With accurate GPS location performance, a robust programmable rules engine, 2- axis accelerometer for measuring driver behavior and vehicle impacts, geo- fencing, m essaging and much more, the G6S is designed for powerful solution deploym ent. The G6S also includes optional routing and optimization with Garm in® FMI (Fleet Management Int erface) - a key part of today’s fleet m anagement. The G6S is powered by over- the- air device management and maintenance system, (Programming, Updates, and Logistics System ). FOTA (Firmware update over the air), GSM Jamming detection and 156 hardware based geo- fences makes this the perfect choice for superior safety and security of your vehicle.
G6S User Manual 4ContentsATTENTION!.......................................................................2INSTRUCTIONSOFSAFETY.................................................2LEGALNOTICE....................................................................3INTRODUCTION..................................................................31.PackingList.....................................................................52.Specifications.................................................................63.Overview........................................................................74.Installation.....................................................................95.I/OConnector..............................................................116.LEDIndicatorBehavior.................................................127.UserCommand.............................................................138.MessageExplanation...................................................15Appendix..........................................................................18Optionalaccessory.......................................................18
G6S User Manual 51. Packing List ￭Standard The G6S box is packaged with all the components that is necessary for operation, it contains: ⃞G6S device x 1 ⃞2*8/ 2*5 PIN I/ O connector cable x 1 To connect with ex ternal power supply and optional accessory To the back panel I/ O connector of device NOTE: SIM card which for GSM/GPRS connectivity is not supplied in the package, please consult your local SIM provider for further information. ￭Optional accessory Name Purpose USB cable To configure device via configuration tool on computer Ex ternal GPS antenna It helps to fix GPS faster Microphone It enables device for voice m onitoring features *Speaker It enables device for voice conversation *iButton For driver ID verification via 1WIRE link *DS18B20 Tem perature sensor via 1WIRE link Immobilizer It enables the device to kill/ restore engine Panic button Device reports or calls when this button being pressed *DB9 cable Communicate with computer via RS232 serial link *GARMIN cable Communicate with GARMIN PND Magic tape It helps to attach device firmly Fuse Protecting device from electrical surge Backup battery Rechargeable, Li- Po 3.7V, 250mAh NOTE: * indicates only for G6S Please refer chapter Appendix for further details and installation guide for optional accessory
G6S User Manual 62. Specifications Physical Dim ension 80(L)x 51.5(W)x 26(H)mm Weight ~75g (With battery) Environment Operating temperature - 40℃~+ 80℃ (without backup battery) - 10℃~+ 50℃ (with backup battery) I/ O connector ACC input 1 channel Digital input 2 channels Analog/ Digital *2 channels Digital output 3 channels *1WIRE Maxim Integrated *RS232 serial link RxD & TxD Microphone 1 channel *Speaker SPK+ & SPK- USB Mini USB 2.0 CPU ARM STM32F103 UcOS LED indicator 3 LED indicators GSM & GPS & POWER Power supply Ex ternal DC 8 to 32V Backup battery Type Rechargeable, Li- Po 3.7V, 250mAh Power consum ption Standby: 70mA@12V, Working: 100mA@12V GSM/ GPRS Antenna Built- In Model Cinterion BGS2- W Quad band: GSM 850/ 900/ 1800/ 1900MHz Multiple- slot Class 8 (dual band)/ 10 (quad band) GPRS class 10/ Station class B TCP/ IP over PPP SIM card 1.8V & 3.3V GPS Internal antenna 25*25 with amplifier Ex ternal antenna GPS Active Antenna Model uBlox NEO 6M Channel 50 Parallel Channels Accuracy Autonomous< 2.5M Sensitivity - 162dBm Sensor Vibration sensor Built- In Accelerate sensor Built- In, 2- axis Flash storage 16Mbits Built- In, Maxim um to save 8,000 GPS postions NOTE: * indicates only for G6S
G6S User Manual 73. Overview 3.1. Device Capabilities  FOTA, Firmware Upgrade Over The Air  Flex ible Programming Rules  Garmin® FMI  1- Wire® Interface  GSM Jamming Detection  Quad Band GSM Modem  HDOP For Precise Location  Multiple Data Upload Modes  2- Axis Accelerometer Sensor  156 Hardware Based Geo- Fence/ Point of interest  Over Speed Management  Multiple Inputs & Outputs  Configurable Inputs & Outputs  Internal Backup Battery
G6S User Manual 83.2. Mechanical construction ￭Front panel view ￭Rear panel view Battery power supply switcher USB cable port 2*8/2*5 PIN I/O connector GPS external antenna connector LED indicator This side towards to the sky Cover remove slot
G6S User Manual 94. Installation 4.1. Remove the cover 4.2. Insert the SIM card 1, On the back panel of the device, there is a small slot at the top of it. 2, Utilize a screw driver or sticker, insert it to the slot a little bit. 3, Swing the screw driver at the direction as illustrated and the cover will slide out. 1, Flip up cover of SIM holder, facing metal side of SIM card to the PCB board as step1. 2, Insert SIM card to cover then flip it down, pull the cover at the direction as step2 to lock up SIM card firmly. Note: Please disconnect any kind of power source for device in advance.
G6S User Manual 104.3. Install direction ￭G6S has accident & harsh detection features that based on built- in 2- axis sensor. Its accuracy will be affected by install direction of device, please find the sticker on housing of device for recom mended direction. 1, By default you need to point side “0” to the engine, which is the direction of vehicle heading. 2, If you prefer other side pointing to engine, please send comm and to change the default setting of installation direction. E.g.: Side “1” is pointing to engine, Command to send: 1234,BDS;1 Note: 1234 is the default user password to send command, and default is 1234,BDS;0 , and please set phone number as User number before sending this command.
G6S User Manual 115. I/O Connector ￭On the rear panel of device PIN definition NOTE: * indicates only for G6S PIN# Color Name Definition Remark/ Default 1 *Green/ White RxD Receive serial link data RS232 2 *Purple SPK+ Positive (+ ) of speaker 3 *White/ Black Tx D Transmit serial link data RS232 4 *Orange/ White SPK- Negative (- ) of speaker 5 *Yellow/ Black 1WIRE 1WIRE link 6 *Blue/ White AD2/ IN4 Analog/ Digital input channel High level active (> 19V)7 Grey MIC Microphone 8 Orange IN1 Digital input channel 1 Low level active 9 Brown OUT3 Digital output channel 3 10 Red/ Black IN2 Digital input channel 2 Low level active 11 Yellow OUT2 Digital output channel 2 12 Green AD1/ IN3 Analog/ Digital input channel High level active (> 6V) 13 Blue OUT1 Digital output channel 1 14 White ACC ACC/ Ignition signal input High level active 15 Black GND Negative (- ) 16 Red VCC Positive (+ ) 8V- 32V DC 
G6S User Manual 126. LED Indicator Behavior ■GSM LED: Green Server socket connected: Flash once quickly every 3 seconds GSM network registered: Flash twice quickly in a row every 3 seconds GSM network unregistered: Flash 3 times quickly in a row every 3 seconds SIM card error: Flash 4 times quickly in a row every 3 seconds Serial link communication error: Flash 5 times quickly in a row every 3 seconds GSM module OFF: Never flash ■GPS LED: Yellow GPS fixed: Flash once quickly every 3 seconds GPS unfixed: Flash twice quickly in a row every 3 seconds GPS communication error: Flash 3 times quickly in a row every 3 seconds GSM module OFF: Never flash ■Power LED: Red Using external power supply: Flash once quickly every 3 seconds Using backup battery: Flash twice quickly in a row every 3 seconds Backup battery low voltage: Flash 3 times quickly in a row every 3 seconds Under iButton mode: Glowing constantly Set successfully: Flash once every 1 second
G6S User Manual 137. User Command ￭Set User Phone Number There are 2 users phone support ed by G6S, they have the same authorization. User1’s command words are UNO0, UPW0, USP0. User2’s command words are UNO1, UPW1, USP1. Below will take user1 as ex ample: To set your cell phone number as User1 to control and receive messages from device, please send UNO comm and to the device, e.g.: 1234,UNO0;+8613912345678 Or 1234,UNO0;13912345678 Ex planations: 123 4: Default password. UNO0: Command control word for setting user num ber. + 8613 9123 4567 8: Phone num ber with country code. 13912345678: Phone number without country code. Device is supposed to reply a confirm ation SMS to you, if the device does not accept the comm and, it also reply a message with content: Command err. ￭Modify User Password Factory default password 1234 Changing the factory password at the first usage is highly suggested. New password should be 4 digits that from number “0- 9”. To modify password, send UPW command from your USER phone num ber, e.g.: 1234,UPW0;5678 Ex planations: 123 4: Factory Password UPW0 : Command control word for setting new password 567 8: New Password ￭Set position report interval to user phone Device is able to report its current position periodically according to the setting, default is every 30 minutes. To change it please send USP command, e.g.: 1234,USP0;0;30S;G;W
G6S User Manual 14Ex planations: 123 4: User password USP0: Command control word 0: Interval Mode, related with dynamic report condition 0: Mode0 1: Mode1 30S: Report interval S: Second, range from 30 to 900. M: Minute, range from 15 to 59. H: Hour, range from 1 to 240. G: Working mode O: Disable periodically report to USER. G: GPS location information as first priority, if it is invalid, will be replaced by LBS information. S: Using LBS information only. L: Device will voice call USER periodically for voice monitoring purpose. W: Location information type T: Text for current location, showing GPS coordinate. W: Google map hyper link for current location.
G6S User Manual 158. Message Explanation ￭Periodical SMS report Below are the different kinds of message will be received by user periodically according to the setting of command USP, example on G6S. “W” mode 1. GPS is fix ed Content of message Explanation G6S V1.00 LTM 2013- 06- 06 14:17:12 http:/ / maps.google.com/ maps?q... GSM - 52dBm EXT_PWR= 12.08V BAT= 3.86V #30 Device name/Firmware version Date/Time Google map hyper link GSM network signal strength External power voltage Built-in battery voltage Consumed messages There are 2 kinds of m ap hyper link available, static and dynamic, it depends on t he setting of command USP, e.g.: Static link: http://maps.google.com/staticmap?zoom=14&size=300x300&markers =%n(,%e&sensor=false Dynamic link: URL0;http://maps.google.com/maps?q=%n(,%e&t=m&z=16 2. GPS is not fix ed Map hyper link will be LBS (URL1) instead of GPS (URL0) Content of message Explanation G6S V1.00 LTM 2013- 06- 06 14:17:12 http:/ / maps.google.com/ maps?q... GSM - 52dBm EXT_PWR= 12.08V BAT= 3.86V #30 Device name/Firmware version Date/Time Google map hyper link GSM network signal strength External power voltage Built-in battery voltage Consumed messages
G6S User Manual 16“T” mode 1. GPS is fix ed Content of message Explanation G6S V1.00 LTM 2013- 06- 06 09:41:22 GPS 1.55/ 0.50/ 3/ 4 N23.164302 E113.428456 SPD:0km / h 0 GSM - 52dBm EXT_PWR= 12.13V BAT= 3.96V #27 Device name/Firmware version Date/Time HDOP/ALTITUDE in meter/Fixed satellite number/Time of first fixed N means north/S means south E means east/W means west Speed/Heading GSM signal strength External power voltage Built-in battery voltage Consumed messages 2. GPS is not fixed, using LBS instead Content of message Explanation G6S V1.00 LTM 2013- 02- 28 23:51:09 MCC/ MNC/ LAC/ CID/ RSSI 460/ 0/ 2503/ 962C/ - 53dBm 460/ 0/ 2731/ 40F4/ - 60dBm 460/ 0/ 2703/ 4050/ - 70dBm GSM - 58dB EXT_PWR= 5.13V BAT= 4.17V #20 Device name/Firmware version Date/Time Base station information type Main station, MNC/MNC/Local area code/Station ID/Signal strength Neighbor station 1 Neighbor station 2 GSM network signal strength External power voltage Built-in battery voltage Consumed messages ￭Event SMS report If an assigned event is triggered, device will send notify SMS to user according to the setting. “W” mode 1. GPS is fix ed Content of message Explanation G6S V1.00 LTM 2013- 06- 06 14:17:12 http:/ / maps.google.com/ maps?q... ETD:6/ ACC ON GSM - 52dBm EXT_PWR= 12.08V BAT= 3.86V #301 Device name/Firmware version Date/Time Google map hyper link Event ID/User defined event name/Data GSM network signal strength External power voltage Built-in battery voltage Consumed messages
G6S User Manual 173. GPS is not fix ed Map hyper link will be LBS (URL1) instead of GPS Content of message Explanation G6S V1.00 LTM 2013- 06- 06 14:17:12 http:/ / maps.google.com/ maps?q... ETD:6/ ACC ON GSM - 52dBm EXT_PWR= 12.08V BAT= 3.86V #301 Device name/Firmware version Date/Time Google map hyper link Event ID/User defined event name/Data GSM network signal strength External power voltage Built-in battery voltage Consumed messages “T” mode 1, GPS is fix ed Content of message Explanation G6S V1.00 LTM 2013- 02- 28 23:51:09 GPS 1.55/ 0.50/ 3/ 4 N23.164302 E113.428456 SPD:0km / h 0 ETD:6/ACC ON GSM -52dBm EXT_PWR= 12.13V BAT=3.96V #28 Device name/Firmware version Date/Time HDOP/ALTITUDE in meter/Fixed satellite number/Time of first fixed N means north/S means south E means east/W means west Speed/Heading Event ID/User defined event name/Data GSM network signal strength External power voltage Built-in battery voltage Consumed messages 2. GPS is not fixed, using LBS instead Content of message Explanation G6S V1.00 LTM 2013- 02- 28 23:51:09 MCC/ MNC/ LAC/ CID/ RSSI 460/ 0/ 2503/ 962C/ - 53dBm 460/ 0/ 2731/ 40F4/ - 60dBm 460/ 0/ 2703/ 4050/ - 70dBm ETD:6/ACC ON GSM -52dBm EXT_PWR= 12.13V BAT=3.96V #28 Device name/Firmware version Date/Time Base station information type Main station, MNC/MNC/Local area code/Station ID/Signal strength Neighbor station 1 Neighbor station 2 Event ID/User defined event name/Data GSM network signal strength External power voltage Built-in battery voltage Consumed messages 
G6S User Manual 18Appendix Optionalaccessory￭USB cable To the com puter that runs configuration tool To the front panel of device ￭GPS ex ternal antenna Item Parameter Antenna Center Frequency 1575.42± 1MHz Band Width CF± 5MHz Polarization RHCP Gain 5dBicZenith V.S.W.R ＜1.5 Impendence 50Ω Ax ial Ratio 3dBmax Dim ension 25*25*300cm LNA Gain 28± 2dB Noise Figure ＜1.5 Filter Insertion Loss ＜3dB Ex - band Attenuation 12dB@CF+ 50MHz/ 16dB@CF- 50MHz Supply Voltage 2.2~5V DC Current Consumption 5~15m A V.S.W.R ＜2.0 Mechanical Cable RG174- - - 3M Connector SMA Redone Material ABS Mounting Method Magnet Environm ental Operating Temperature - 40℃~+ 85℃ Relative Humidity Up to 95% Ingress Protection IP65~IP67 Vibration 10 to 55Hz with 1.5mm amplitude 2hours Environm entally Friendly ROHS Compliant
G6S User Manual 19Ex pose this terminal under the sky To the rear panel of device, GPS antenna connector ￭Microphone Item Parameter Length 3 meters Material Al- Si Output impedance 2.2Kohm Sensitivity - 30db to 60db Frequency 50HZ to1600HZ Channel Stereo PIN15 PIN7 Black wire: To PIN15 Red wire: To PIN7 This accessory is necessary for voice related functionalities. ￭Speaker Item Parameter Length 3 meters Impedance 16ohm Sensitivity 96db/ W Frequency 50HZ to1600HZ Signal to noise ratio 75db Power consumption 1W PIN16 PIN15 PIN4 PIN2 Red: To PIN16 Black: To PIN15 White: To PIN4 Blue: To PIN2 This accessory is necessary for voice related functionalities.
G6S User Manual 20 ￭1- Wire PIN15 PIN5 White wire: To PIN15 Red wire: To PIN5 Driver ID application PIN15 PIN5 1 & 3: To PIN15 2: To PIN5 ￭Panic button PIN8/ 10 PIN15 Black/ White wire: To PIN8/ 10 Black wire: To PIN15 Press button to send SOS message/ call from G6S ￭Fuse This accessory protects the device when illegal power supply has been connected. PIN16 Red wire: PIN16 To ex ternal power supply ￭RS232 to DB9 PIN1 PIN3 PIN15 Green wire: To PIN1 Yellow wire: To PIN3 Black wire: To PIN15 To Female DB9 interface
G6S User Manual 21 ￭RS232 to GARMIN interface PIN16 PIN15 PIN3 PIN1 Power cable: Black: To PIN15 Red: To PIN16 Data cable: Brown: To PIN15 White: To PIN3 Yellow: To PIN1 To GARMIN PND ￭Immobilizer Immobilizer is an electronic security device fitted to an automobile that prevents the engine from running, it can be control by digital output channel from G6S PIN9/ 11/ 13 85: To + 12V/ 24V 86: To PIN9/ 11/ 13 87a & 30: Between ignition wire FCCRegulations:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device m ay not cause harmful interference, and (2) This device must accept any interference received, including interference that m ay cause undesired operation. This d evice has been t est ed and f ou nd t o com ply wit h the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
G6S User Manual 22interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipm ent does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct t he interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect t he equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an ex perienced radio/ TV technician for help. Caution: Changes or modifications not ex pressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.RFExposureInformationThis device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of ex ceeding the FCC radio frequency ex posure limits, human prox im ity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Navigation menu