Gospell Smarthome Electronic GB8802 Wireless Inspection Camera User Manual 8802AJ

Download:
Mirror Download [FCC.gov]
Document ID	1038482
Application ID	KcYYWbakxfbsou5ZTY8foA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	161.36kB (2016979 bits)
Date Submitted	2008-12-02 00:00:00
Date Available	2008-12-02 00:00:00
Creation Date	2008-10-23 16:15:43
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2008-12-02 09:22:48
Document Title	8802AJ.cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	zhen

User Manual
Wireless Inspection Camera
with Color LCD Monitor
Verswon Nu.: 1.0
Pwease read ms user Manual carefully before usmg zms product‘
CONTENTS
WELCOME ' ' 2
PACKING LIST — — 2
STRUCTURE
INSTALLATION
GENERAL SAFETV INFORMATION ----- - - ------ -
OPERATION
CAUTIONS
FCC INFORMATION — Back cover
MONITOR POWER CONNEG’ION , , 6
* BSDZAJ means GBBBOZ(camera) + GB7302(momtor)
_1,
WELCOME
Thanks you for chacsmg our mspemcm vmeo camera and (mar LCD
momtar. wease read the cperatmn gulde carequy before usmg thls
product.
The product is desngned as a remote Inspection devwce It can be
used tn look mm tight Spats and beam back rem—Mme viden to monitor.
Typwcal applicatmns might mcmde HVAC inspection, autumative
mspectmn, came roumg, aummatwe/hoal/alrcraft mspecmon, etc
PACKING LIST
MW camcra wwth
Hanomm Grmxl 1mtuhex1 LCD Mnmmrxi
“ a
Anessery Honk x 1 Accessory Accessory
Magnet x 1 ermrx 1
carmemame Adapter for
For adapter mommr x 1
STRUCTURE
Camera
Flexwme
Tube
Camera
and LEDs
Power lrvmzzlcr
asxgnal Output
Power
DN/OFF
Monitor
Puwer supply
Socket
muse Outvul
~P0wer mmacw
~LCD ON/DFF
Puwer ON/DFF
image Onencalian
Briqmness
Comrast
Swgna‘ mm
INSTALLATION
pwease mstall tne battenes. tube first before using tne product, and
choose the accessory accordmg to actuaw srtuatron.
Steps cfmstallauon as fchwlng-
1. To Install Batteries
1-1 Usmg a screwonver, remove screw and cover.
172 Remove battery compartment and msert four new AA batteries mt
the proper swots m the battery compartment. Proper battery
orrentatron rs rnmcateo on the battery compartment
@W T
(3?
1-3 Remstall battery compartment and battery caverand screw as
before.
nor Dry your nanos before rnstauatron or repwacing batteries.
2. To Install The Camera With Flexible Tube
Cunnectthe camera Wlth tube tn the bcdy, make sure the keyed ends
are properly aligned Once they are allgned, finger tlghteh the knurled
Knob to hold the connection lh place
Flnger ughten
Kaye“ ends the knurled knab
”ti l Cam
3. To Install Accessory
The three lrlcluded accessarles, (mirror, hook and magnet) all attached
to the lmager head the same way.
To connect, hold the lmager head, Shp the end of the accessory, over
the flats nf the lmager head.
fflljljlfi
MONITOR POWER SUPPLY
Plug the connect came mlo power sucker of monitor, and pmg the end
or connect cable mto adapter, then connect the adapter to sv~35v
power, the power rnpreator wrh Ilghts on red, whreh rndrcates being
chargmg.
The bth-m Lr-oattery wrh he charged after the adapter rs pmggea
m, and the Red mdlcator hghts up dunng chargmg and w." turn off after
3 mm charge.
A m charge can power the mumtor forepout 5 hours contmuflusw
When charging, the monrtor wrh oe evehaole
GENERAL SAFETY INFORMATION
WARNINGV Read and understand all instructionsfailure to follow aii
instructions iisted heiow may result in eiectnc shock, fire
and/or serious personal iniury.
SAVE THESE INSTRUCTIONS!
>:< Prevent object and iquid entry. Never spiH iiuuid of any kind on
the Video dispiay unit Liquid increases the risk of eiectricai shock
ano damage to the product.
>< The unit is not shock-resistant. Do not use it as a hammer or
drop it.
>< Do not immerse the camera and monitor in water. Store in a
dry oiace. Such measures reduce the risk of electric shock and da—
mage. The imager head and the cabie are water resistant when the
unit is iuiiy assemhied, but the monitor and camera s not.
x Do not use the camera if condensation forms inside the lens.
Let the water evaporate before using again
Operat'on
1. Rull the ON/OFF sWitch to turn on the camera, and the power indicator
Wiii hghls,The snitch then acts as a dimmer forthe twm LEDs that sur-
round the camera on the imager head and prowde iighting.
\e__
min LEDs
prduide homing
z. Shde the ON/OFF switch to ow poslllnn, and power Indicator will hghis
on green, the plcture display on LCD. Adjust brightness. comet.
orientatieh, and roll the ON/OFF switch pnhe camera for better image
effect.
T e switch acts
as a dimmer
3. When in use, metube shpuip easily maneuver'itseifinto position
90mg forward.
J /
discreteiy
The flexibiemhe can be
bent Into a certain shape.
This may heip you expicre
the tube into narrow areas.
* The camera/momtcrare
competibiewim both wired
and wireless.
4. The accessories of Hendhoid
Inspectiun Camera can be used
to retrieve smaii items iike
drppped rings or screws
integ ranve
\\
A C TIONS
. The apparatus shall not be exposed to dripprhg prspiashmg and that
ho obiects filled With Ilqulds, such as yases, shall be placed on the
apparatus
Turn offthe camera/Monitor ifthe system is not iri use
The adapter is used asthe disconnect device frnm the mains. The ads
aptershaii remain readily operable.
. The camera/Monitarcen only be completely disconnected frdrri the
malns by unplug the adapter
. Du riot cut the DC power cable of the apparatus to fitWith another
powersource.
Attentron should be drawri to the eriyrrorirrierit aspects ofbettery disp-
osai.
Remove the batteries when cleahirig the unit
Remnve the batteries before storing the uhrt fora iohg trme
When necessary, REPLACE ALL FOUR BATTERIES In this unit with new
ones.
Use only the sl'ze arid type bf battery specified
Be sure to mstaii the battery With the correct polarity as ihdrcated iri the
battery compartment
Properly dispose of the battery. Exposuretb high temperatures can
cause the battery to explode, so do not dispose of iri a fire. Place tape
overthe terminals to prevent drrect coritact wrth other objects. some
couhthes have regulations cehcermhg battery disposal. Please fallow
all applicable regulations.
The graphics included are Subject to minor change Without notice.
FCC INFORMA ION
Th‘ls device complies with part 15 of the FCC Rules. Operation
is subject to the followmg two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, lncludlng
interference that may cause undesired operation.
changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
EU Environmental Protection
Waste electrlcal products should not be
disposed of with household waste.
Please recycle where faclllties exlst.
Check with your Local Author‘lty or
retaller for recyclmg adVlce. _
40.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Extract
Page Count                      : 11
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:10d8af22-7365-460d-9ff2-ce8a180c902f
Producer                        : Corel PDF Engine Version 9.397
Create Date                     : 2008:10:23 16:15:43Z
Modify Date                     : 2008:12:02 09:22:48-08:00
Metadata Date                   : 2008:12:02 09:22:48-08:00
Creator Tool                    : CorelDRAW Version 9.397
Document ID                     : uuid:bea89401-656a-4f0a-86d8-1aac62da28b4
Format                          : application/pdf
Creator                         : zhen
Title                           : 8802AJ.cdr
Author                          : zhen

EXIF Metadata provided by EXIF.tools