Gospell Smarthome Electronic GD7122 Full HD Remote Home Surveillance User Manual 8122HE

Shenzhen Gospell Smarthome Electronic Co., Ltd. Full HD Remote Home Surveillance 8122HE

UserManual.wiki >

Gospell Smarthome Electronic >

GD7122 User Manual

15_GD7122 UserMan r1

Full HD Remote Home SurveillanceEU Environmental ProtectionPlease read this user manual carefully before using this product. Failure to understand operation procedures may result in injury.Version 1.0Model: GD7122Waste electrical products shouldnot be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

01 028122HE=GD8122+GD7122CONTENTS1.1 Welcome1. General informationThank you for purchasing our products. The product is a high-quality fine-positioning digital monitoring product designed and developed for the security and protection field. Please read the instruction of product carefully before use. 1.2 Precautions1. The receiver shall not be placed in the position where it's easy to drop or splashed with liquid; 2. Please turn off the power switch of camera/receiver when don't use the product for a long time; 3. The power supply can be disconnected completely only when the charger is unplugged. 4. Do not touch the power switch and receiver with wet hands or goods to avoid electric shock; 5. If solid or liquid enters the chassis, please disconnect the machine power and ask qualified technicians to check before restart; 6. When the receiver is shut down, do not unplug the power supply directly. Instead, please enable the power supply of receiver to be closed automatically by using the shutdown button on the panel so as to avoid damage to mobile HDD. 7. If the description of the product or parameters in the instruction is inconsistent with the material object, please in kind prevail. We reserve all the right for the final explanation. 1.3 Packing list ① Camera×(1-4) ② Receiver×1 ③ Receiver power×1 ④ Camera power×(1-4) ⑤ Remote control×1 ⑥ Wall nail×4×(1-4) ⑦ Screw×4×(1-4) ⑧ SD card (optional)×1 ⑨ Cable (optional)×1⑩ HDMI line (optional)×1 ※ The pictures in the instruction are for reference only, please in kind prevail.(optional)① ③② ④ ⑤⑦910 1. 1.1 Welcome ............................................................................................. 02 1.2 Precautions ........................................................................................ 02 1.3 Packing list ........................................................................................ 022. D ...................................................................................... 033. Installation ........................................................................................... 044. Operation 4.1 Basic operation ................................................................................... 05 4.2 Record mode ...................................................................................... 07 4.3 Video playback ................................................................................... 09 4.4 Video deletion .................................................................................... 10 4.5 Video output ..................................................................................... 105. Main Menu Setting 5.1 System settings .................................................................................. 10 Network .............................................................................................. 11 Date/time ............................................................................................. 12 Language ............................................................................................ 12 Record mode ...................................................................................... 12 Format SD/USB ................................................................................. 12 .......................................................................... 12 Display items ...................................................................................... 13 System information ............................................................................. 13 System upgrade ................................................................................. 13 Scan mode period .............................................................................. 13 Mute ................................................................................................... 13 ....................................................................................... 14 Brightness ........................................................................................... 14 Volume ................................................................................................ 14 Alarm volume ...................................................................................... 14 Power saving mode ........................................................................... 14 About ................................................................................................... 15 5.2 Recording settings ............................................................................. 15 5.3 Video playback ................................................................................... 16 5.4 Camera settings ................................................................................. 16 Pairing ............................................................................................... 16 ............................................................................................ 18 PIP settings ......................................................................................... 18 ................................................................................ 18 brightness ........................................................................................... 18 5.5 Alarm settings ...................................................................................... 196. .................................................. 217. ...................................................... 248. Specifications ..................................................................................... 289. Functional Characteristics ........................................................... 2910. Fault Diagnosis 10.1 FAQ ................................................................................................. 30 10.2 Fault diagnosis ................................................................................ 31 10.3 Elimination of common diesel engine malfunctions ......................... 32 General informationesignationsStorage for recordingLoad defaultActivationLatency vs qualityOperations for iOS Apple ClientOperations for Android Client

03 042. esignationsD 3. Installation1. Install the camera in a suitable monitoring position and fix it with screws. 2. Install the receiver in a suitable horizontal position (or hang it on the wall). Nail screw into the appropriate place on the wall, and then hang the receiver on the screw3. Insert the SD card or external storage device such as mobile HDD. SD card Mobile HDD Attention※ SD card and external storage device do not support hot plug.※ External storage device or SD card only supports the Fat32 format. ※ If the SD card or external storage device used for this machine is used before, please format it firstly when using. ※ Please use Class 4 SD card or above, or it cannot be identified. ※ Data in the SD card or mobile HDD cannot be restored after formatting, please be careful. Del/LCD, TV change-over switch Startup /shutdownRecordFour-imageNavigationOK Playback Display mode Menu Remote control Receiver 10.1-inch touch screen SD card slot Support Camera GD GD8122Hanging Loud speaker Power switch USB port Supply hub Network port HDMI interface Pair key Supply hubMIC hole Camera lensInfrared lampRain cover AntennasPIR sensorIndicator Support Photosensitive inductionhole (Bottom) Antennas

05 06Time stampVPicture display area Picture display area Picture display area Picture display area 4. Operation (The following mainly introduces the operating method for remote control, and operation settings can also be conducted by clicking on the touch screen.) 4.1 Basic operation 1. Connect the camera with power supply so that the index lamp of camera will be on. 2. Connect the receiver with power supply. 3. Startup: Under the shutdown state, press on the receiver or remote control and release it after about 2s to start up the receiver. Shutdown: Under the startup state, press on the receiver and release it after 5s to shut down the receiver. Or press on the remote control and release it after 2s to shut down the receiver.4. Match the codes of camera and receiver (4 cameras can be connected simultaneously at most). The codes have been matched already as factory default. If not, please match the codes according to the "Code matching" description on Page 16. 5. After successful code matching, the real-time monitoring image will occur as follows 6. Click at the left bottom of the touch screen with finger to pop up a setting menu, and click a single icon to enter the setting: A: A setting menu will be popped up by a single click and packed up when clicking again; B: Full image display of a single camera: Sequential click will circulate from CH1, CH2, CH3 and Ch4; C: Circulation display: switchover is triggered between circulation display and disenabled circulation after clicking; D: Click to enter the four-image display; (Only display when connecting multiple cameras) E: Click to enter the one-large three-small image display; (Only display when connecting multiple cameras) F: Setting: Click to enter the main menu setting; G: Video recording: Video recording will start by a single click and stop when clicking again. H: Playback: Click to enter the playback interface; I: Volume: The volume will be circularly set from 0, 1, 2, 3, 4 and 5 by sequential click, but it defaults to be 3. A B C D E F G H INote: Apply a little force when swiping or clicking the touch screen with finger. (Since the product adopts resistance screen, gentle force may have no reaction on the touch screen, but large force may hurt your finger or damage the screen, so please apply appropriate force.) 2016/01/15/09:30 2016/01/15/09:30 2016/01/15/09:30 2016/01/15/09:30

07 08 8. Press on the remote control to enter the circulation mode display. The circulation interval time includes 5, 10, 15, 20 and 30s and can be set under the "System settings". Meanings of icons on the real-time monitoring screen: 4.2 Record mode Manual recording 1. Under the real-time monitoring state, press and on the remote control to choose the camera recording videos as the current camera; 2. Press the recording/stop recording key on the remote control. The recording icon will occur on the display screen to indicate the recording starts; 3. Press on remote control again to stop recording. Users can set the starting and ending time of recording on the menu "Record", the device will make recording automatically according to the set starting and ending time, and videos will be saved automatically after recording. Specific steps are as follows: 1. Press MENU on remote control or click on the touch screen to enter the setting interface; 2. Press or to choose "Record", and then press OK to enter;3. Press or to choose “Timer recording" and then press "OK" to enter; 4. Press or to choose "New schedule" and then press "OK" to enter and set the starting and ending time: Press or to choose the items to be set; Press or to set; Press OK to confirm the setting and exit. 5. After setting, the device will record automatically according to the set starting and ending time. 6. During recording, if pressing the recording/stop recording key on the device, the recording will stop. When an object moves in the visual angle range of camera, the device recording can be triggered. Specific steps are as follows: 1. Press MENU on remote control or click on the touch screen to enter the setting interface; 2. Press ◄ or ► to choose "Record", and then press OK to enter; 3. Press or to choose "Motion detection " and then press "OK" to enter; 4. Press or to choose the camera to be set; 5. Press ◄ or ► to choose "ON"; 6. Press or to choose the items to be changed; 7. Press or to make adjustment; 8. Press OK to confirm the setting and exit. Motion detection Timer recordingUPnP is not started or router firewall is blocked Network switch failure Successful network switch Successful network switch The camera is the current camera Video recording state Signal intensityCamera name Silence 1080P1080P720P 720PFullSuccessful mobile HDD insertion Successful SD card insertion Four pictures One picture One large and three small V2016/07/15/09:30VC2C3C4Picture display areaPicture display areaPicture display area2016/07/15/09:302016/07/15/09:302016/07/15/09:302016/07/15/09:30V2016/07/15/09:30 2016/07/15/09:302016/07/15/09:302016/07/15/09:30Picture display area Picture display areaPicture display areaPicture display areaPicture display area Picture display area"Sensitivity", "Stop condition" and "Area setting" can also be set in the motion detection setting: Prompt appears when SD card or mobile HD does not accessPrompt appears when SD card or mobile HD is fullPrompt appears when SD card or mobile HD is locked7. Press on the remote control to switch among the 3 display modes: Sensitivity: "High, medium and low" are adjustable The time can be set in second

09 1007/22/2016 1 / 1C1 06-11C2 06-11DELETESD Card 1 / 207/22/201607/23/2016DELETESD4.3 Video playback 5. Main Menu Setting 1. Under the real-time monitoring state, press the playback key on the remote control or click on the touch screen to enter the playback interface: 2. Press or on the remote control to choose the date folder; Press OK to confirm it and enter; 3. Press or on the remote control to choose camera; Press OK to confirm it and enter; 4. When SD card and mobile HDD coexist, please click the icon on the top right corner to switch the storage device. 5. Press or on the remote control to choose the video to be played; Press OK to play it; 6. Press ◄ or ► for REW or FF; Press or to adjust the volume; Press OK again to pause the video; Press MENU to exit the play mode. 4.4 Video deletion1. Under the real-time monitoring state, press the playback key on the remote control or click on the touch screen to enter the playback folder: 2. Press or on the remote control to choose the video or video folder to be deleted; 3. Press on the equipment to delete it. Folders can be deleted only when they are empty. Attention4.5 Video output Connect the receiver to a larger display /TV to see the monitoring video clearly. HDMI line Please click the range to be set: V : Indicating to choose the current range Yellow "V": Indicating to activate regional motion detection Area setting The space unticked represents closed.Click this icon on the screen to pop up the play menu Exit Play/Pause FF REW Click to enter the full-screen display, click again to enter the 1-big & 3-small screen display (The following mainly introduces the operating method for remote control, and operation settings can also be conducted by clicking on the touch screen.) Under the real-time monitoring state, press "MENU" on the remote control or click on the touch screen to enter the following interface: 5.1 System settings

11 12Date / TimeDate/ /2016 11 15Time:20 11Network Date/time Language Set and check the network information; Set system time and date; Set system language; Set whether to stop recording or cover the earlier video when the storage medium is full; Record modeDisplay items Format the storage medium or not; Set the storage medium; System information System upgrade Scan mode period MuteLoad defaultFormat SD/USBStorage for recordingWhether the signal intensity, SD card state, camera names andthe like are displayed on the display screen and video recorded; Check the system information; System upgrade: On or off of loudspeaker on the receiver; Restore the default settings or not; Set interval time displayed in cycle on the camera monitoring screen; Press or to choose an item, and press OK to confirm it. Network 1. After choosing "Network" on the interface "System ", press OK to enter and check; 2. Press MENU to exit; Date/time After choosing "Time/date" on the interface "System " and press OK to enter the time/date setting interface; Press or to select items to be changed; Press ◄or ► key to make changes; Press OK to confirm the changes; Press the MENU to exit the time/date setting interface;NetworkNetwork PasswordNetwork AddressingPush NotificationNetwork InformationPress ◄ or ► to select items to bechanged; Press OK to confirm the changes; Modify network parameters; Press OK to save and confirm; Press MENU to exit. Press ◄ or ► on the remote control to choose "System " and press OK to enter the system setting interface: SystemNetworkRecord ModeLanguageDate / Time Format SD/USBBrightness Volume Alarm volume Power saving mode Adjust the brightness of LCD screen; Adjust the volume; Adjust the alarm volume; Adjust the power-saving mode; Language 1. After choosing "Language" on the interface "System ", press OK to enter the language setting interface; 2. Press or to select the appropriate language, and press OK to confirm the setting and exit. About GPL DeclarationRecord mode 1. After choosing the "Record mode" on the interface "System", press OK to enter; 2. Press or to choose "Ordinary" or "Overwriting", and then press OK to confirm the setting and exit. Prompt Ordinary: When SD card or mobile HDD is full, recording will stop automatically; Overwriting: The system will delete the most previous videos automatically when the SD card or mobile HDD is fully occupied to clear enough storage space to ensure this recording. 1. After choosing “ SD/USB " on the interface "System ", press OK to enter; 2. Press or to choose "Cancel", "SD card" or "USB device"; Cancel: Cancel the formatting; SD card: Format SD card; USB device: Format mobile HDD. 3. Press OK for formatting; 4. After the formatting is completed, the hint "Format successful" will prompt. Format Format SD/USBStorage for recording1. After choosing the "Storage for recording" on the interface "System ", press OK to enter; 2. Press or to choose "SD card" or "USB device"; 3. Press OK to confirm the setting and exit.

13 14System information 1. After choosing "System information" on the interface "System ", press OK to enter and check; 2. Press MENU to exit. System upgrade 1. After choosing the "System upgrade" on the interface "System ", press OK to enter; 2. Press or to choose the camera to be upgraded; 3. Press OK to make adjustments; 4. Press to make upgrades; 5. Press OK to confirm or press the MENU to exit. Scan mode period1. After choosing the "Scan mode period" on the interface "System ", press OK to enter; 2. Press or to choose time; 3. Press OK again to confirm the setting and exit. 4. Scanning can start only when shot pressing on the remote control and will stop after pressing again. Mute1. After choosing "Mute" on the interface "System ", press OK to enter and check; 2. Press or to choose "OFF" or "ON"; 3. Press OK again to confirm the setting and exit. Load default1. After choosing the "Load default" on the interface "System ", press OK to enter; 2. Press or to choose "Cancel" or "Confirm"; Cancel: Cancel restore defaults; Confirm: Restore the defaults; 3. Press OK to confirm the setting and exit. UPnPUPnP UPnP C2C3 C4 Display items 1. After choosing the "Display items" on the interface "System ", press OK to enter; 2. Press or key to make selection; 3. Press OK to check whether the item displays. If the item is displayed, the icon " " behind the item will appear. RSSI: Icon of signal intensity. Icon: SD/USB state: Whether SD card or mobile HDD is inserted. Icon: Camera: Camera name. Icon: Network: State of network connectivity. Icon: 4. Press the MENU to confirm the setting and exit. Volume 1. After choosing "Volume" on the interface "System ", press OK to enter and check; 2. Press ◄ or ► to make adjustments; 3. Press OK to confirm the setting and exit. Prompt Under the real-time monitoring state and playback mode, volume can also be adjusted by pressing or . Brightness1. After choosing the "Brightness" on the interface "System ", press OK to enter; 2. Press ◄ or ► to make adjustments; 3. Press OK to confirm the setting and exit. Alarm volume 1. After choosing the "Alarm volume" on the interface "System ", press OK to enter; 2. Press ◄ or ► to make adjustments; 3. Press OK to confirm the setting and exit. Power saving mode 1. After choosing the "Power saving mode" on the interface "System ", press OK to enter; 2. Press or key to make selection; 3. Press OK to enter; 4. Press or key to make selection;5. Press OK to confirm the setting and exit.

15 16RecordTimer RecordingMotion Detection5.2 Recording settings(The following mainly introduces the operating method for remote control, and operation settings can also be conducted by clicking on the touch screen.) 1. Under the real-time monitoring state, press "MENU" on the remote control or click on the touch screen to enter the setting interface: 2. Press ◄ or ► to choose "Record"; 3. Press OK to enter the following interface: Timer recordingSet the beginning and ending time of video recording, and the equipment will make video recordings in accordance with the set time. After recording, the video will be saved automatically (see Page 8 for specific steps). Motion detection recordingWhen an object moves in the visual angle range of camera, the device recording can be triggered. See Page 8 for specific steps. 5.3 Video playbackSee Page 9 for specific steps. 5.4 Camera settings1. Under the real-time monitoring state, press "MENU" on the remote control or click on the touch screen to enter the setting interface: 2. Press or to choose "Camera "; 3. Press OK to enter the following interface: (The following mainly introduces the operating method for remote control, and operation settings can also be conducted by clicking on the touch screen.) About1. After choosing the "About" on the interface "System ", press OK to enter; 2. Press OK to confirm the setting and exit. CameraPairingActivationPIP SettingLatency VS QualityPairingCamera-1Paired 0xe01f0008Camera-2 Paired 0xe01f0007Camera-3 Paired 0xe01f0006Camera-4 Paired 0xe01f0005The camera will not be interfered by other frequency points after 1. Press or to select "pairing". Press OK key to enter; pairing PairingPairingCamera-1Paired 0xe01f0008Camera-2 Paired 0xe01f0007Camera-3 Paired 0xe01f0006Camera-4 Paired 0xe01f0005Pairing.....Long press the PAIR button on TX for 2 seconds352. Press or to choose the camera to be paired; 3. Press OK to enter pairing:Infrared detection recordingWhen a human body moves in the visual angle range of camera, the device recording and intelligent linkage alarm can be triggered. Specific steps are as follows:Infrared detection recordingCamera-1 ON Camera-2Camera-3Camera-4ON ON ON Press of to select "ON or OFF", press OK key to confirm:

17 18ActivationCamera-1OffPairedPairedPairedCamera-2Camera-4Camera-3OnOnOnPairing OKCongratulations!!!5. After successful , the display screen on the receiver will pop up the following prompts: pairingPromptActivation1. Press or to choose "Activation" and then press "OK" to enter; 2. Press or to choose the camera to be set; 3. Press ◄ or ► to choose "ON" or "OFF"; 4. Press OK to confirm the setting and exit. Attention In the case of "OFF", the camera will not perform any action such as the display of monitoring screen, video recording and automatic alarm. PIP settings Set the resolution ratio and pixel of video recording. 1. Press or to choose "PIP setting" and press OK to enter; 2. Press or to choose the camera to be set; 3. Press OK to enter the following interface: If pairing fails, the system prompts “Pairing failed”. perform pairing again.Please 4. double-color LED red light flickers. (The camera is on power-on and startup state) Latency VS QualityLow Latency, Normal QualityMedium Latency, Better QualityHigh Latency, Best QualityLatency vs quality1. Press or to choose "Latency vs quality” and press OK to enter; 2. Press or to choose the image quality to be set; 3. Press OK to confirm the setting and exit. PIP settings Resolution size qualityTop High Medium LowHigh Press or to choose "resolution ratio" or "image quality"; Press or to choose "Premium", "High", "Medium" or "Low"; Press OK to change; Press MENU to confirm the setting and exit.

19 20Connect network Download the client program1. Turn on the intelligent mobile device terminal and enter “App Store”,then search and download “ ” software. as the following interface: GoCamProApp Store2. Install the software, as the following interface:5003Network ready!NetworkGolbal IPLocal IPPortDevice ID1. Connect the cable to the receiver and open the receiver as shown in the figure below: Note: The cable connection requires Class 1 router 2. After successful connection, enter "Main menu"=>"System settings"=> "Network"=>"Network information". The following interface will occur on the display screen: Brightness 1 2 345678Brightness1. After choosing the "Brightness" on the interface "System ", press OK to enter;3. Press MENU to confirm the setting and exit. 2. Press ◄ or ► to make adjustments; Camera-1Camera-2Camera-3Camera-43. Press or to choose "Motion detection" or "Infrared detection" and press ▲▼4. Press or to choose "ON" or "OFF"; 5.5 Alarm settingsequipment to enter the setting interface: enter;OK to enter;Prompt Prompt The alarm can make effect only when the infrared detection or motiondetection recording functions.The item is to set whether the device will alarm automatically when someone 1. Under the status of real-time monitoring, press the MENU key on the 2. Press ◄ or ► on the remote control to choose "Alarm " and press OK to 5. Press OK to confirm the setting and exit.moves in the visual angle range of the camera.

21 223. To view the video image, you need to choose the right title in the Device list, then click the line to enter the monitoring mode.4. Click on the bottom icon. APP will try to connect the RX of the previous selected title, if connection is successful, the video image will display on the client. Take a photo2013/11/15/16:436. Operations for iOS Apple Client1. Click the APP and enter “Device list” interface. Click the icon to add new camera.2.When RX and mobile phone can normally connect to outer net. you just need to set network password in the receiver, and then input to the mobile phone. Then input the Device ID in the receiver to the Device ID in the mobile phone or scan the QR code to get the Device ID. View imageNetwork Network passwordNetwork AddressingPush Notification Network information Devices New Device SaveNAMEDevi ce na meIDDevi ce IDPASSWOR DDevi ce pa sswor dipad 4:4 0 PM 58%Network informationGlobal IP Intranet IPPort Device IDSet the password and enter it to the clientInput to the clientScan to the clientThe network is ready!

23 247. Operations for Android Client1. Turn on the intelligent mobile device terminal and enter “Google play” store, then search and download “ ” software.GoCamPro2. Install the software, as the following interface:Google playDownload the client program5003Network ready!Network InformationGolbal IPLocal IPPortDevice IDConnect network1. Connect the cable to the receiver and open the receiver as shown in the figure below: Note: The cable connection requires Class 1 router 2. After successful connection, enter "Main menu"=>"System settings"=> "Network"=>"Network information". The following interface will occur on the display screen: Remarks: 1. Only when the receiver in the real-time state, to view the image.2. If the Device ID was unable to get to the RX, indicates that RX did not normally connect outer net, need to check your network.3. If everything is normal, but still not in the mobile phone client to view images, please close the client software running always in the background, please try it again.4. The network adapter does not support hot-swappable, Before open the RX, The network is connected with the RX.Setting Push Notification1. Turn on the push notification function on the receiver, enter Main Menu System => Network => Push Notification, the receiver screen displays the following:=> Push NotificationTurn on/offMinimum Push intervalTime PeriodRegistered MobilesUsers can set according to the situation of Minimum Push interval and time periodRecordTimer recordingMotion Detection2. Click "PUSH" to Register an account. When there is a movement in front of camera, it will send a push message to your smart phone. As below shown:the After successful registration, the monitor will receive the registered account name.Registered Mobiles12341234Notice: Only when the motion detection is open, push notification function will be effective.When clicking on client-side, you can check the video data of SD card or mobile hard disk ofthe receiver. Noteautomatically stored in the phone. : The picture took by mobile client-side shall be Remote viewing video on receiver side

25 263. Click the icon, the image will display on the smart phone.4. Press and hold the device ID to enter the setting interface.NetworkNetwork PasswordNetwork AddressingPush NotificationNetwork Information5003Network ready!Network InformationGolbal IPLocal IPPortDevice IDView image1. Click the Settings and enter device list. add new camera.InputSet password and inputOr scan2. When RX and mobile phone can normally connect to outer net. you just need to input Device ID to the client. or scan the QR code to get the Device ID. the password is set up in the receiver, and then input to the mobile phone. and saving.

27 288. SpecificationsAll the specifications are subject to minor change without prior notice.Setting Push NotificationRecordTimer recordingMotion DetectionAfter successful registration, the monitor will receive the registered account name.Registered Mobiles5551. Turn on the push notification function on the receiver, enter Main Menu System Network tion, => => => Push Notifica the receiver screen displays the following:Users can set according to the situation of Minimum Push interval and time period2. Click "Notification push setting" to register an account. When there is a movement in front of camera, it will send a push message to your smart phone. As below shown:the 1. Only when the receiver in the real-time state, to view the image.2. If the Device ID was unable to get to the RX, indicates that RX did not normally connect outer net, need to check your network.3. If everything is normal, but still not in the mobile phone client to view images, please close the client software running always in the background, please try it again.Push NotificationTurn on/offMinimum Push intervalTime PeriodRegistered Mobiles4. The network adapter does not support hot-swappable, Before open the RX, The network is connected with the RX.Notice: Only when the motion detection or PIR Recording is open, push notification function will be effective.When clicking on client-side, you can checkthe video data of SD card or mobile hard disk of the receiver. Playback Note:automatically stored in the phone. The picture took by mobile client-side shall be Remote viewing video on receiver side Remarks: Push notification setting1/2.7",CMOSDC 12V/2AAt most support 128GB255 x37x173 (mm) -10 ~50℃ ℃USB 2 0 .At most support 3TB.1024(R.G.B.) X 60030fps (one path) / 15fps (four paths) DC 12V/1A IP66≤3LuxItems Image sensor Effective pixel Horizontal view anglePower SupplyWaterproof Capacity Night Vision Distance Dimensions(W*D*H) Weight Dimension of the Display Storage Format Screen resolutionSD card capacity Hard disk capacity Video frame rateData output Frequency rangeDimensions(W*D*H)WeightOperating Temperature10.1 TFT LCD" 15~85%RH0 ~40℃ ℃Operating TemperatureOperating Humidity Outdoor 300 meters (Maximun)Wireless transmission distance8122HE69x59x130mm1080P832g238g85 5± °The lowest illuminance 10MStorage Format AVIPower supplyOperating Humidity 15~85%2 4GHZ.Modulation method 16QAMCamera ResolutionMonitor Frequency response characteristicPIR Recording

29 301. Why the screen doesn’t display any monitoring picture after the camera is connected? Answer: 1. Please check whether “Active” is set to “ON”. 2. Please check whether pairing succeeds.2. The recording time is set already or the motion detection recording is enabled, but the receiver does not start recording when the time comes or a motion is detected. Why? Answer: 1. Check whether the storage medium is inserted. 2. Check whether the storage medium is full.3. The system does not respond when the playback button is pressed. Why? Answer: Please check whether the current camera is in the recording status. If it is in the recording status, the system will not respond when this button is pressed. When human body moves beyond the angle of lens and within the angle of senor, an alarm can also occur on the device. However, the display device cannot display human body's move in the picture area. 4. Why cannot see human body in the picture area, when the alarm occurs?Answer: of lens. For the product, the angle of sensor is greater than that 10.1 FAQ10. Fault Diagnosis 9. Functional CharacteristicsSupport simultaneous access, recording and browsing of 4 paths wireless * HD cameras; Free of wiring and easy to install; *Safe digital wireless, free of interference and able to avoid privacy disclosure; *10.1-inch touch display screen and integrated camera; *Support 128GB SD card and can externally connect mobile HDD of up to 3TB; *Various recording modes available; Manual recording, timing recording and * motion detection recording; Up to 20m of night visual range; *Outdoor rainproof camera with a barrier-free transmission distance of 300m; *With video transmission function, and external larger display screen * accessible; With IR-CUT function. *Remote viewing of real-time monitoring available through iPhone/Android * device; Please note the monitor is not a computer, so some memory devices cannot operate on it.

The name and content of hazardous substances in the product To meet the related regulations and requirements of Chinese Controlling and Administrative Measures for Pollution of Electronic Information Products (The 39th Order Issued by Ministry of Industry and Information Technology of the People's Republic of China), the toxic and harmful substances in the products manufactured and marketed by the company are classified by the components, proclaimed as follows: Name and Content of the Toxic and Harmful Substances or Elements in the Products33 34router firewall. See the instruction manual of router for the detailed situation and setting methods.C.The receiver cannot use the function of UPnP and the client can connect to the receiver (RX), but in bad performance and small client fps.D.There are many routers whose UPnP has been started up and fire wall has been closed, but the receiver still cannot use the function of UPnP, i.e. the situation that “network is normal (UPnP is not started up)” or “UPnP is started up, but not available” may appear.6.The icon on monitoring screen of the receiver refers to the optimal network status.The receiver is in the monitoring screen and the network option is displayed as open. If the above icon appears when no client is connected to, your network has reached the optimal status.7.The icon on monitoring screen of the receiver refers to numbers of client connectedThe receiver is in the monitoring screen and the network option is displayed as open. If one more client is connected, one more dot will be appeared at the bottom of the icon. The above icon indicates three clients are connected to the receiver.8.Wrong information of the client (cell phone or pad):A.“Unable to resolve host 'ns.davdns.com'”, “Cannot access Internet”: the client cannot connect to the Internet. Please check whether Wi-Fi or 3G/4G of the client has been opened and ensure the client can normally surf the Internet.B. “Cannot connect to server (ns.davdns.com) (1)”: the client cannot connect to the server. Please check whether the server can normally work. C.“Device is offline at ns.davdns.com (0006015610431129)”: the possible situations are: the receiver is not started up; the receiver is not connected to network; the receiver is not registered in the server; the receiver software and client APP do not use the same server. Please check whether the receiver can normally work; whether the network is ready; whether the software is applied in a correct approach.D.Connection timeout: the receiver has been registered in the server, but the client (cell phone or pad) cannot connect to the receiver. The possible problems are: insufficient network bandwidth, network jam, or network is blocked by the firewall or NAT.Component nameToxic and harmful substances or elementsMachinePower componentsCables and cable setsAccessoriesPb Hg Cd Cr (VI)PBB PBDE×material lof this component is under limit requirement of the SJ/T11363-2006 X: Indicates that content of this toxic and harmful substance in all homogeneous material of this component is under limit requirement of SJ/T11363-2006 standard. All components labeled with "X" indicate they comply with the RoHS regulations of the European Union. Machine: It includes printed circuit board and the components, electronic In accordance with the different product model, the purchased product may not contain all the above components. Electronic & information products sold within the People's Republic of China must have this mark labeled; the figure in it refers to its service life under normal Indicates that content of this toxic and harmful substance in all homogeneous standard. components, etc.conditions.

Federal Communication Commission (FCC) Radiation Exposure Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help.

Navigation menu