Gospell Smarthome Electronic GD8208 Baby Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3908576
Application ID	1EyBM6F6EMg3BORAh/8ohQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	393.28kB (4916021 bits)
Date Submitted	2018-07-02 00:00:00
Date Available	2018-07-02 00:00:00
Creation Date	2018-05-31 18:06:07
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2018-06-06 17:19:35
Document Title	10705017040 8208KF英文说明书0531(已曲线）
Document Creator	CorelDRAW
Document Author:	admin

4611: Digital Wireless
Baby Monitor
EU Environmental Protection
Model ND.: BEDEKF
Vacililies exlslv Check wllh you!
local amhorl‘y ur retaller lor
recycling advice.
understand operancn procedures may result In “11qu
PAP Version 1,0
Please read |hls user manual melully helm uslng lhls producl. Failure lo
Wasle eleclrical products should A
ncl be dlsposed olwilh household 22
wasle. Please recycle where
Introduction
Thank you for choosing our baby mommr. Before using me
producl.p\ease read the Instrucnun careful‘y In case of damage
tolhe produclduelo1mproperoperat1on.
Ports in The package
/}Q\ ,
EV ;
Camera Monitor Manual
Power adamerum camera, 5v IA)
Poweradaplsr [formonilon 51/ 2A)
Powercable x2
01
Products’rrucfure
1 Pnntusensmve sensor 4,Mmmpnane
2,Lens 5.TF cam 51m
31nd1camLED 6.5peakev
®i
@*_
7.Temperalure sensor
a Amenna
9 USE mleriace
11 Antenna 15 Cannrmmmn mman/ 21.5mlusindicalor
Znnm human
12 Menu buuon/Remrn 17 sn1m1gn1/Vo1ume+
22 M1cruphune
13 On/oflmman 1a snwmown/angntness 23.5honcmbmwn
1A Sheep human 19 smmemvmuma
15 Smltup/Enghtnessi 20 D1amgue key
24 SET button
25. usB menace
OZ
Function introduction of buttons for camera
Indicator LED. When green LED flashes slowly.
startup is successfui. or the camera is disconnected
with the monitor. When green LED flashes quickly.
the camera and monitor are being paired. When
green LED is on constantly. the camera and monitor
are paired successfully
SET button. Short press it for 15. jump to pairing
mode.
Function introduction of buttons for monitor
@ Turn on/offthe display (press for 2s)
03
Press the button toiump to Menu. press the button again.
exit from Menu. The button also has the function of
returning to previous step.
Steep button Press this button, the screen is off, press it
again, the screen turns on. (this button does not
influence automatic sleep setup. Automatic sieep still
functions normally.)
In real-time viewing. by pressing this button. the camera
can be Controlled to turn left
in menu interface, by pressing this button, the menu
cursor shifts Ieft.
In shortcut interface. press this button to turn down
volume.
in realitime viewing, by pressing this button. the camera
can be controlled to turn right.
In menu interface. by pressing this button, the menu
cursor shifts right.
In shortcut interface, press this button to turn up voiume.
LJ
snonrcur
In reaI-time viewing. by pressing this button. the camera
can be controlied to turn upward.
In menu interface. by pressing this button. the menu
cursor shifts upward.
In shortcut interface. by pressing this button. brightness
ofthe display is increased
In reairtime viewing, by pressing this button, the camera
can be controlied to turn downward,
In menu interface, by pressing this button, the menu
cursorshifts downward.
In shortcut interface, by pressing this button, brightness
ofthe display is decreased
In real-time viewing. by pressing this button. the image
size is doubled,
In menu interface. pressing this button to confirm.
Shortcut button. By pressing this button. shortcut
#4
interface u- iiiii m pops up. voiume and brightness of
#-
the monitor can be adjusted.
In reaHime viewmg. by pressing this button. jump to
taikbackfunction; releasing the button. talkback function
is off. The voice from camera end cannot be heard till the
button is released.
Status indicator LED'
The first green LED lights constantly: indicates that
the camera and monitor are connected successfully
The first green LED flashes slowly (once per second):
indicates that it is starting. withoutconnecting the camera
The first green LED flashes quickly (3 times per
second): indicates code matching
04
From the second In fifth green LEDs flash from low to
high: Quantity otllashing LED indicates sound volume
received
From the second to fifth green LED s flash
simultaneously (once per second): indicates that alert
signal is received.
The sixth red LED is on indicales that the lithium
battery is being charged; (It has nothing with the device
stutus)
The sixth red LED is c": indicates that the battery is fuII
Explanation foricons
Icon ofslolus bar
E No signai connection between tne manitorarid camera
I.|I Signal strength between the manimrand camera
CradIesong enabled
J7
"@ SIeep setup oi monitor enabIed
"c snow current mom |emperature
E; snow current baiieryievei wnen ballererveI istco iowi
ineicori WiiibeconieE) andflasn
ml Sound aIarm enahIed
3 Temperature aiarm enabIed
Icon for message push
Camera IS not added orcamera arid monitorare disconnected
Sound aIarm pramp|
lb ll ll»
Temperature aiarni prompt
OS
Equipmenlinslollolion
1.Position the camera(s)
Find a location forthe camera
that gives you the best view of
your baby in his or her crib
Place the camera on a flat surfaceJike a dresser
IMPORTANT:NEVER pIace the camera or cords cfany kind
inside the crib.NEVER place the camera or cords within reach
oftne baby
Before you start...
Make sure you read the important Information
sheet included in thls package
06
07
AWARNING
Strangulation
Hazard: Children
have STRANGLED
in cords. Keep this
cord out of the
reach of children
(more than 3ft
(0.9m) away). Never use extension
cords with AC Adapters. Only use
the AC Adapters provided.
1. Installation of camera
1. Power on
Plug an end ofthe accompanying
charging cable into the USB port in
the back of camera.
Plug the otherend into the accompanying
power adapter. Then plug the adapter into
a socket.
After the Camera is powered on it will start up automatically (the
camera automatically swmgs up and down orfrom side to side.
the indicator LED on camera base lights and the green LED flashes
slowly, Now, the camera starts up successfully),
08
2. Installation of monitor
1. Power on monitor (the monitor has a built-in lithium
battery, it it has enough power, please implement the second
step operation directly.
Plug an end ofthe Charging Cable into the USB
charging port in the side or monitor Plug the
otherend ofthe charging cabie into the power
adapter. Then plug the adapter into a power
socket.
2. Starting up ofmonitor
Press @ on the monitorfor 2s
Now, reai-time video Will be shown on monitor
Note: The equipment had been paired before ieaving
factory. if no video is shown on the monitor after above
operation, piease complete equipment pairing operation
again. For detailed procedure please see Paget ‘i , “Add Camera"
09
Function setting of the monitor
You can define functions foryour baby monitor to meet your
best demands. Sound and temperature alarm Will inform you
automaticaliy. In the chapter every setting that can be defined by
you wiii be expiained one by one.
Monitor access menu
In realitime viewing, press the 0 button on the monitorto return
MENU
to menu bar. in non-real-time case. press C) button {or muitiple
menu
times till the screen Jumps to menu bar.
enn-
cmms “arm-M “"{fl‘flm
0®®
tutu-m u m unnr sn’rwes
10
11
Setting ofcctmerct
(camera pairing and deleting)
1.Add camera
1. Select the "
monitor.
2 Select the “"9 icon, then press the "OK" button ofthe
monitor.
icon, then press the "OK" button of the
v. ‘nxmm
/’\
g}
3. Now, the equipmentWill prompt "camera is no paired"
v. vntnm
94 CD
Camera is No paired.
4 Press the SET button on the camera bottom for1 second,
green indicator LED of the camera will flash quickly,
the equipmentiumps to pairing mode. Then, press
the "OK" button of the monitor.
Kg
use me needle m press |he
SET buttaniorl maria
5. Now. the camera and monitorstart pairin
9;
”mu
Cl
siartpainng......
6. When the monitor prompts "pairing is OK", it
equipment is paired successfully.
‘
mm.-
C!
Pairing is OK
indicates that
7 The monitorWiiiiump to monitoring screen, and green indicator
LED ofihe camera Will light constantly
12
2. Delete camera
1. Seiecttne "
2. Seiecttne --§-- icon, then press the "OK" button of the monitor.
3. Now, the equi
icon, then press the “OK" button of the monitor
‘r-nvl)
o ,/7\
6%?)
pmentWill prompt "camera is pa
deieted". Press the "OK" button ofthe monitor.
‘r-nvl)
szoralinaiud can he mun
ired Can be
4. When the monitor prompts "Deleting is OK", it
camera has bee
n deleted successfully.
um.-
Cl
Deieimvls 0K
indicates that
13
5. The monitorwill return to monitoring screen and show no
camera added. Green indicator LED ofthe camera Wiil turn to
Hash
r—x
Setting of sound olorm
Set alarming range of sound sensitivity. The function
will identify loudness ol baby's cry, when it exceeds the
setting range, the monitor will send out the alarm sound.
1.Seiectthe " " icon. then presstne“OK" button ofthe
monitor.
2. Seiect o. a " icon as demanded, press the
“OK" button of the monitorto complete setting of sound
alarm.Press C) button on the monitorfor 2 times, it Wiil
MENU
return to real-time screen (HG is seiected, when "OK"
button of the monitor is pressed, the monitorWill not push
sound aiarm any more)
.i v pm ..
14
Note: The alarm sound will last for 1 minute The sound alarm
can be closed by pressing any button on the monitor, and it
will not receive the notice within 3 minutes after closing.
—.. v .- m n
15
Setting of temperature alarm
When baby's room is too hot or too cold. temperature
alarm will push notice to your monitor.
1. Selectthe “0" icon. then press the “OK“ button of the
monitor.
Celsius degree setting
Setas Celsius degree' Select I '2 icon. pressthe "OK"
button ol‘the monitor
Temperature switch. Select 0 empress the OK button of
the monitorto indicate temperature alarm function
enabled. (
After setting is OK. press the :2“ button of the monitorfor
2 times. it returns to real»time screen.
Fahrenheit degree
Setas Celsius degree" Select 0 ‘F icon. pressthe OK
button olthe monitor.
Temperature switch: Select' 0N. press the OK button of
the monitorto indicate that temperature alarm lunction
enabled successfully 0
After setting is OK, press the MM button of the monitorfor
2 times to return to realitime screen.
t3
Note: Default normal temperature is 15°C , 30°C (59°F , 86°F).
When the temperature of baby’s room is beyond the range.
the monitorwill receive the sound of temperature alarm The
sound will last forl minute. Notice for temperature alarm
can be closed by pressing any button ofthe monitor. and it
Will not receive the notice again within 3 minutes after
closing.
Cradlesong
The baby monitor has five cradlesongs to help you
with coaxing the baby to sleep.
1. Select the o " icon. then pressthe “OK" button ofthe
monitortojumpto setup page.
2. Selectthe music you want to play. press the OK button
of the monitor and the camera Will play the cradlesong
selected by you. After setting is OK. pressing the OK
button ofthe monitor again. the cradlesong pauses.
When selecting “ALL". all cradlesongs will be played in
"w
loop. After setting is OK. press p button of the monitor
MENU
and it will return to realitime screen
16
Note: There Wlll be a " || "icon below the option ofcurrent song,
llthe cradlesong pauses, the icon Will become “N
Sleep mode
You can set your monitor as automatic sleep mode.
The setup will automaticallyjump to sleep made
according to the time set byyou.
1. Select “a 'con and press the "OK" button ofthe
monitor, itwill Jump to setup page.
2. Select the time ofsleep as demanded. Press OK button
of the monitor Now, the monitorwill automaticallyjump to
sleep mode After setting is OK, press ME?“ button of the
monitortwo times to return to real-time screen.
606
Note: There are 3 options including 5 minutes, 30 minutes and 60
minutes lor sleep time, You can make a choice according to your
own demand By selecting OFF and pressing "OK" button of the
monitor, sleep mode Will be closed
17
Setup
The setup includes time setting, factory reset and
viewing of hardware version.
1. Time setting
Calibrate thetime ofmonitor
1. Select “@“icon and press the "OK" button oflhe
monitor, to Jump to setup page.
2 Select "G" icon and press the OK button ofthe
monitor tolump to setup page.
£3 0
3 You can press the< > button ofthe monitorto select
the item to be adjusted; press the ‘ button ofthe
monitor to edit the selected item, Atter setting is OK,
press (3 button ofthe monitor 3 times, then it will return
MENU
to real-time screen.
0 s n: 0}
DATE: zinc-1L5
TIME: 13:25:23
18
2.Factory reset
Format all setting ofthe monitorand delete camera.
1,Select " "men and press the "OK" button of the monltor, it wrll
jumplo selup page.
2. Select Ҥ?"icon and press the OK button ol the monitor. ltwrll
jump to setup page.
1r . “n-
9.0
Now, the equipment wrll prompt you to restore the default
settings. Select "YES“, press the "OK" button ofthe monltor.
The equlpmentbeglnsto implementfactory reset.
.. ”nu- .. "mm
Rum" Io Mann uttlllgfi
%uo
srm restoring"...
4 Afterlaclcry reset is OK, lhe monltorwlll automaticallylump to
monitormg screen and show the prompt icon of no camera added
Meanwhlle, the green lndicator LED of camera will flash.
v. ‘nzrrv-
l9
3.lnlormation on version
Check receiverversion information
1, Select'e icon, press "OK" button ofthe monltortolump to
setup page
2. Select "0“ lot)” and press the OK button ofthe monitor to
Jumplo selup page.
.l v ,. z!
(D
3. Now, the receiver will show verslon related lnformatlon. Alter
viewrng, press raj” button ofthe monitor 3 tlmes to return to
real-time screen .
.m 1 .- law In
20
Specificqfions
Item Specmoarion
Image senscr 1/4" cmos
~ Effecuve Prxer 720p
g Honzomal Viewing Angre 75:5"
‘2 Rotahnn angle Pan 350” Tm 105"
5 Night wsual range 5m
g Inteflace rmcrd use
0 Power suppry 5v IA
Dimensions(w~D~H) 106x102 5x142 5mm
A LCD 5"TFT LCD rnunddr
g Screen Resomuon 1280x720
g Imerrace use 2 u
5 Bauery capamty 2000mAH
-5 Battery Dperalmg turns -3 5H
3; Power suppry 5V/2A
“5 DImensIons(W‘D‘H) 164x195x25mm
RF Characteristics
andFCCC nmcannnln matmn
NOTE- We cqumvm has been tested and «dune (o compry wnn \hc hum; «or a crass a drgrul dcwwr
nursuanno Dan 15 cnne rcc Rmes These mm are desrgned m prwde reesanzmepmearcn agams‘
nannrur mterfemnce n a resrdennar rnsunenun
ans eqmpmem generates uses and can mama radm (requency energy and, .r nnl mslaHed and used m
accordance wnn me Instrucuunsr maycause harmm rnxenerenoe |u ramu wrnnrunmans naweven
«nere rs na guaranree «nar \Meflerence wru nm dccur m a pamcurar msraHahon mnrs eqmpmem daes cause
nannrur mterference to radre m memsion reoephon, wnrcn can b: de‘ermmed by tummy :ne :qmpment L71!
and on me userrs enwumged my lo ccnecune \Meflevence Wane or more dune vouowmg measures
sReenemcrmlecareme recewmg amenna
Jncrvasc zne sepamran bemcn ‘hccqmpmcm and rcccwcv
scannecnne sqmnmem mm an aufle‘ on a crrcun drwerenurorn mat lo whmmhe vecewer rs
cannenzd
sConsmHhedea‘eroran expenenced vamo/I’Vmchnlclan iome‘p
Changes or modmcandns not exuress‘y approved by me pany responsrme var mmpnance mum vom m2
users authamy In upevake \he eqmpmem ans dewce cnmphes with Fan 15 dune FCC Rures aperenen
Issumecnmne rouawrngm condmans.
4111an devme may rm! cause hamM \Merderence
42) ans devrcc mus| accept any Wcflm‘nw vcccwcd. incmdmg m|cr1¢rcnec \ha‘ may cause undesrred
daemon
Tne szrrnum Perrnrssrme Exposure (MPE' rever nae been czmmaled based on adrstanoe was 0 cm
herween me devme and me nurnzn body To marnrern commence wrm RF exposure veqmvemem use
vmdum that mamtam aZDcm drsrance berweenme dewce and mum ccdy
Herebyrwe decreres manms dense Is m commence wrm me essenuar redurrernenrsand mner rerevan:
nmvrsrans or Dwemwe 2010/53/EU.
Nance. Observe me nanonar \uca‘ reguranune m are \ocahan wnere me dance ‘5 to be used
ans devrce may be resumed «cruse m some oraH mambersta‘as anne European unron (EU)
RF Range
2400-2483.5MHZ
Wire‘ess Transmrsion
300m (Ouldoor)
EU Environmental Prov
ions 1 A
:ec‘nrur recycnnd statmnsshaH de
respunsrme«drcrrcurarprucess — PAP
General
Operahon temperature -10‘C~50‘C
Storage remperature -20“C-60“C
Operalmg humrdity 15~85%RH
Zl
ZZ

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : admin
Create Date                     : 2018:05:31 18:06:07+08:00
Modify Date                     : 2018:06:06 17:19:35+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : admin
Title                           : 10705017040 8208KF英文说明书0531(已曲线）
Creator Tool                    : CorelDRAW
Metadata Date                   : 2018:06:06 17:19:35+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:cc318532-2f1c-49d5-ae28-5716a921b288
Instance ID                     : uuid:c3270f89-db2e-4b53-8ebc-ae40b04fdd0b
Page Count                      : 12

EXIF Metadata provided by EXIF.tools