Gospell Smarthome Electronic GD8209 Digital 2.4G Wireless Baby Monitor User Manual digital 8209JA

Download:
Mirror Download [FCC.gov]
Document ID	977202
Application ID	keaaWyDPWaEwsoNOriXUVg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	94.92kB (1186486 bits)
Date Submitted	2008-07-28 00:00:00
Date Available	2008-07-28 00:00:00
Creation Date	2008-06-10 15:43:57
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-07-27 13:04:41
Document Title	digital_8209JA脳陋脟煤.cdr
Document Creator	PScript5.dll Version 5.2.2
Document Author:	脦垄脠铆脫脙禄搂

Operation Guide
2.4GHz Digital Solution
Wireless Baby Monitor Kit
Model No.: 8209JA
The graphics included are Subject w minor change without notice
1. Packing List
(1) ZAGH) Wirclcss Camera x 1
®ZAGHz Wireless Receiverx 1
(3) Farphone x1
g) Adzpler [or camera >< 1
® Adapm for xecewer x 1
' 8209JA means GD8209 + GB 7609
2. Diagram
Camera adapter
Raceway
me Adflpmv
3. Structure
3-1. Structure ofcamera
Antenna
IR LEDs Alarm
17 Switch
,_ owe!
“5 On/Olf Leaning
Swnch
Channel
ls’gfi’fér k Swimh Bauery
Com
3-2. Structure of Receiver
» Bauer
Antenna % x \ CW;
\ Earphone
Power \
‘ Socket
TFT-LCD
Channel
lndlcamr
Slec
Bulmg
Channel
v 1
Bunan ° “me
Switch
Eliminale Power
Alarm on/ofl
Button
Speaker
4. Installation
4-1. Installation of Camera
4-1-1. Basic installation of Camera
1. Locate the camera to a specific position.
2. Connect the camera to the adapter and then slide the power
ewttch to ON position,
Note:
®This camera can also use dry ballery as power supply Please load
4 AAhaueries lo the ballerycomparlmemal lhehack ofcamera
wllhlhelrpolarnles matched.
@The Ac adaplerwlll work mslead ofballerles after ll Is plugged,
it the camera is not used for a lung perlod otttme, please unplug
the adapter and remove the ballenese
CtDAvnid short circuit of the battery.
f“
”fin l IID
tIl
" Continue working for 5 hoursflR OFF)
.3.
3. Rotate the rounded head of camera to a suitable angle for
surveillance.
4-1-2. Camera Learning setup
I! lhere is interference happened when using, lhe Learning Switch can
avoid in Push the r earning Switch on the back of camera from on [0
on, and then press the Elimmale hunon on the receiver for 3 secnndsl
The clear picture will display on the screen.
Learning
Nn need to switch channel for avoiding interference
4-1-3. Camera alarm setup
‘ihe camera provides Sound Detection.
r\\\ Alarm
-\
Alarm sound volume is adjustable
4,
Sound Alarm refers ro rne alarm against sooncl. l'a set up sound alarm
slide the alarm swtren to vox position . The sysrem enter sound alarm
mode stand—by to pick up sound for alarm to trigger. when sound is
detected, the alarm begins to sound for 2 minutes until the Eliminate
Alarm button is pressed to snooze for 35 seconds. After the 35 seconds
is up, the sound alarm will automatically standrby for the next alarm
to reroccur.
Alarm is disable when the alarm is switch to the OFF position.
Not
Alarm sound will automatically turn ot’fif the Eliminate Alarm button
are not press within 2 minutes, If both the battery and NC adapter
are in use and the alarm serup tailed to trigger, please power cycle
both the camera and receiver to reactivate the alarm.
4-2. Installation ofReceiver
4-2-1. Basic installation of Receiver
1. Connect the receiver to rlie adapter and then slide the power
switch to on position.
Note:
®Tliis receiver can also work on dry battery. Please load 4 AA
batteries to the battery compartment at the back of receiver with
their polarities matched,
@The AC adapter will work instead of batteries after it is plugged.
lttlte receiver is left unused for a long period oftime, please unplug
the adapter and remove the batteries.
® Avoid short circuit of the battery.
.5.
HEH
, Continue working for 5 hours
2. Adjust the vulume control to a desired level.
3. Set rhe channel of receiver to he the same as camera by pressing the
channel hurron continuousln and rhe pictures will display on rhe
screen.
Note:
The receiver s original channels are detmed corresponding [0 camera s
before shipmenr.
5 . FCC information
This device complies wirh panls ofthe FCC Rules. Operaridn is suhjecr
[D the followmg two conditions:
(1) (his dEVICE may not cause harmful interference,
(Z) rhis device rnusr accepr any inrerference received, including
inrerierence mar may cause undesired operation.
Changes or modifi ations not expressly approved by the party responsible
for compliance could void the user’ s authority to operate the
equipment.
.@

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 7
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:54bf23e2-fb3c-4492-9229-02b9abec6cff
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2008:06:10 15:43:57+08:00
Modify Date                     : 2008:07:27 13:04:41-07:00
Metadata Date                   : 2008:07:27 13:04:41-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:E18EC4BDC036DD118A15F6DBE8B4402A
Instance ID                     : uuid:a7bbc934-7369-4ccf-b312-784424d11092
Derived From                    : 
Format                          : application/pdf
Creator                         : 脦垄脠铆脫脙禄搂
Title                           : digital_8209JA脳陋脟煤.cdr
Author                          : 脦垄脠铆脫脙禄搂

EXIF Metadata provided by EXIF.tools