Gospell Smarthome Electronic GD8229 2.4GHz Digital Solution Wireless Remote Pan/Tilt Camera Kit User Manual 8229JE

Download:
Mirror Download [FCC.gov]
Document ID	1339712
Application ID	M1/hHecERU+0FwF4bekiMQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	154.36kB (1929460 bits)
Date Submitted	2010-09-08 00:00:00
Date Available	2010-09-08 00:00:00
Creation Date	2010-03-30 09:51:05
Producing Software	Corel PDF Engine Version 9.397
Document Lastmod	2010-08-30 15:34:43
Document Title	8229JE.cdr
Document Creator	CorelDRAW Version 9.397
Document Author:	zhen

6. Zooming *
you can also enlarge the picture, Press the Zoom button once, the
picture will be enlarge 2X; press again, then back to the original size.
TIP:
* Press the CT RL Button to turn on/off the LCD Screen and keep
the voice for sleeping mode.
* Hold the CT RL Button for 3 second, the pictures will be upside down,
so user could install the camera upside down as a optional.
* You may connect the receiver to a monitorfl'v with AV cable to
view more clear pictures.
Monitor/TV
RECEIVER REMOTE CONTROL THE DIRECTION OF THE CAMERA
The receiver can remote control direction of the camera. The operation
is as below:
1. Press the 4 / b button on the receiver to rotate the camera at
horizontal direction manually. The max. Angle is 270 degree.
2. Press the A / V button on the receiver to rotate the camera at
vertical direction manually. The max. Angle is 120 degree.
This device complies with part15 of the FCC rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference.
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the authority of the user to operate the
equipment.
CAUTIONS
o The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
Turn off the camera/receiver if the system is not in use.
The camera/receiver can only be completely disconnected from the
mains by unplug the adapter.
Do not cut the DC power cable of the apparatus to fit with another
‘ power source.
Attention should be drawn to the environment aspects of battery
0 disposal.
SPECIFICATIONS
-__!a_
__a_
mm—
__mm—
_—s_
__m_
—_
—__
—-m_
Receiver
* Actual transmission range may vary according to weather, location,
interference and building construction.
* All the specification are subject to minor change without prior notice.
Manufacturer:Shenzhen Gospell Smarthome Electronic, LTD
ADD:F/12 F518 Idea Land Baoyuan Road Baoan Central
Area shenzhen City PR China
EU Environmental Protection
Waste electrical products should not be
disposed of with household waste. Pleas
recycle where facilities exist. Check wi
your Local Authority or retailer for
recycling advice.
Operation Guide
2.4GHz Digital Solution
Wireless Remote Panfl'ilt Camera Kit
Model No.: 8229JE
Version No.: 1.0
the graphics included are subject to minor change without notice
PACKING LIST
ii 2.4GHz Wireless camera x1
Lei 2.4GHZ wireless receiverx 1
(J Adapter for camera x 1
, Adapter for receiver x 1
iii Av cahle x 1
1‘ Earphone x 1
* E229JE means 608229 + GD7615
DIAGRAM
Camera
Camera
Adapter
Receiver Adapter Receiver Monitor/TV
14 a?!
VCR
Av Output
in LED;
tens
Built—in Microphone
Antenna Snzke! .
power swncn .
tooe thanking Eulluh
channei sWitcn
, mm a“? incr Sanka
cooe checking indicatar Earvhahe Same!
incv Indicamv Antenna
Wurklng Indlzatur mime Central
tcp screen
% Brlghmess Cnhtml
camera Verticai
Conrai
cm Ehannel Button
“m" Hullmnlal controi
Lo DowerSwflch
inerlack B n E
w eolpoi W
Wankel . i,
be:
INSTALLATION
1 Locate the camera to a specific pus-tlon
2 connect the camera to the adapter arid then slide the power sWitch
to on position. The power indicator lights up
3 connect the receiver to the adapter and slide the power sWitch to ON
position.
Notes:
* This receiver can also wurk on dry battery. Please load 4 AAA batteries
to the battery compartment With their polarities matched.
s3,
* the Ac adapter Will work instead of batteries alter it is plugged If the
receiver is left unused for a long time, please unplug the adapter and
remove the batteries.
4 Code checking *
By pressing the Channel button on the receiver and at the same time
press the Learnlng Key on back of the camera, you may see the code
Checking indicator sparking for about 5 seconds, once it turned on
itself, it means the Code Checking press has well done, and the
picture Will show up on the LCD screen.
5 Aoiust the brightness and volume of the receiver to a satisfied level
fin
vulums conirai
brightness cahlml
Declaration of Conformity
Hereby. ShenZhen Gospel] Smarthome Electronic Co.. Ltd.. declares that this device is in compliance with the essential requirements and other
relevant provisions of Directive 1999v'5s‘EC ,
Caution!
The rnanufactru'er is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
FCC Statement
This eqrriprnerrt has been tested and forurd to comply with the limits for a Class B digital device. pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates. uses and can radiate radio frequency
energy and. if not installed and used in accordance with the instructions. may cause harmful interference
to radio connnunications. However. there is no guarantee that interference will not occrn' in a particular
installation. If this equipment does cause harmful interference
to radio or television reception. which can be determined by turning the equipment off and on. the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-C0nsult the dealer or an experienced radio/TV technician for help.
To assure continued compliance. any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment. (Example- use only
shielded interface cables when connecting to computer or peripheral devices).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2010:03:30 09:51:05Z
Creator Tool                    : CorelDRAW Version 9.397
Modify Date                     : 2010:08:30 15:34:43+08:00
Metadata Date                   : 2010:08:30 15:34:43+08:00
Format                          : application/pdf
Creator                         : zhen
Title                           : 8229JE.cdr
Producer                        : Corel PDF Engine Version 9.397
Document ID                     : uuid:23fb17e8-7d1f-48e5-8156-ae8d43ddf332
Instance ID                     : uuid:bc8887ca-9d90-4af6-85ac-2070dc26ea61
Has XFA                         : No
Page Count                      : 3
Author                          : zhen

EXIF Metadata provided by EXIF.tools