Gospell Smarthome Electronic GD9001 WiFi Borescope Camera User Manual
Shenzhen Gospell Smarthome Electronic Co., Ltd. WiFi Borescope Camera Users Manual
Users Manual
Foreword WiFi Borescope Thanks for selection of WiFi camera supplied by our company. Before using this product, you are requested to carefully read the instruction manual. Wish you a wonderful and delightful experience! Camera Manual I. Packing List Optional WIFI Borescope Camera Manual Model No. :GD9001 Prior to using this product, you are requested to carefully read this manual to avoid any damage to the product resulting from wrong operation or inappropriate use. WiFi Camera Manual Hook magnet Mirror rubber ring x2 AA batteries x4 II. Structural Description 4 2 1 Model No.:GD9001 Prior to using this product, you are requested to carefully read this manual to avoid any damage to the product resulting from wrong operation or inappropriate use. 1.Power switch: long press to switch on, long press again for over 3 seconds to switch off; short press to adjust brightness, with 8 gears, cyclically adjustable. 2.Photo & record key: short press for photo, long press for recording. 3.Indicator lights: When powering on, green light remains steady on; when powering off, green light goes out. When the device fails to connect with handset, green light quickly flashes (3 times per sec.); when connected, green light remains steady on. Recording: green light steadily blinks (once per sec.); Photo: press once, green light blinks once. Orange light indicates low battery level, blinks once per second, and power off after 60s blinking. 4.RESET Key: Restore to factory default. 5.Battery case: 4 #5 batteries inserted. 6.Camera: Ø8mm, Endoscope waterproof grade IP67. -1- Important prompt: III. APP Introduction After SSID or password having been changed, users are requested to delete the network from Main Interface Setting, and reconnect it; otherwise “No Connection” will be always displayed. In case of too low battery level when powering on, orange light blinks for 60 sec. before powering off. When forgetting device SSID and password, using a tiny rod to press the Reset key for 5 seconds will restore to factory default. 1.APP installation Version requirement: support Android 4.0 or latest only; support iOS 8.0 or latest. IOS: “APP Store”, download “WiFi Borescope ”; Android: “Google Play" to download “WiFi Borescope”. Or scan the QR code to install it directly. IOS QR code Android QR code IV. Technical Parameters 2.APP operation Name Step 1: Long press handle power key for 3 sec., open camera and green light blinks. Step 2: Open phone setting, select WiFi hotspot, initial SSID is “WIFICAMERA****”, (XXXXXX as WiFi module coding), input its password (88888888 as default), successful WiFi connection and green light remains steady on. Parameter Sensor size 1/9"inch CMOS Display resolution 640X480 Horizontal viewing angle 48° Visual angle Probe length Step 3: Click 1m Endoscope waterproof grade for real-time video watch. IP67 8mm Diameter of camera head Wireless transmision WiFi Borescope 30M(max) AA(1.5Vx4) Power supply 3.APP functional introduction Camera System Photo:Click this icon to take a picture. Gallery:Click this icon to view pictures taken Working time 3.5±10% H Operating current 300mA±10(max) .JPG Picture format .AVI Video format The image storage path of the Android phone, creat folder in the App: Memory DCIM image(Storage APP image) Operating temperature Storage temperature ﹣20℃~+60℃ Record: Click this icon to record. While recording, the Operating humidity 15%~85% RH Product Size 220 x 46 x 44 mm recording time is displayed on top left corner of the screen, re-click it to stop recording. -10℃~+45℃ Weight 244g Video: Click this icon to view video files recorded. The video storage path of the Android phone, creat folder in the App: Memory DCIM record(Storage APP video) For IOS, the recording video create folder, it can be viewed on the APP, it can not be storaged in the mobile phone photo folder, the path to storage on the mobile phone for IOS, connect the Ituns store to download the recording video. * Actual transmission range varies with climate, location, environmental disturbance and architectural structure. Turn: Click this icon to turn pictures. Settings: Click this icon to enter menu settings Note: The zoom function can be activated via double clicking mobile device screen. There are two zoom levels available. Double click on the mobile screen,the image will zoom in with 1st level. Double click again,the image will zoom in with 2nd level. Double click for the 3rd time,the image will be back to default size. -2- -3- FCC caution The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : da Create Date : 2017:06:30 11:37:24+08:00 Modify Date : 2017:10:12 14:33:30+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : da Title : 10705012500 GD9001_中性英文说明书20170630.cdr Creator Tool : CorelDRAW X5 Metadata Date : 2017:10:12 14:33:30+08:00 Producer : Corel PDF Engine Version 15.1.0.588 Document ID : uuid:d961d222-03c0-48fa-ba8c-0bfacf2c8761 Instance ID : uuid:ecaf3287-0d0b-4e03-bad4-70688440dd80 Page Count : 2 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools