Grace MXHEM Monitoring unit for motion sensing man-down alarms User Manual User guide

Download:
Mirror Download [FCC.gov]
Document ID	3071962
Application ID	jnATee51qeoJKtLxeK2QQg==
Document Description	User guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.79kB (134874 bits)
Date Submitted	2016-07-21 00:00:00
Date Available	2016-09-04 00:00:00
Creation Date	2016-06-10 10:58:45
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-06-10 10:58:45
Document Title	Family 3 (MX) FCC and IC Numbers and label locations 2016-06.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	andy

FCC and Industry Canada Identifications Numbers (and label locations)
FAMILY 3:
FCC ID: J5XMXHEM
Industry Canada ID: 5916A-MXHEM
FCC ID: J5XMXHEM
IC: 5916A-MXHEM
Grace Industries, Inc. -- 2016-06
FCC Statements
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Industry Canada Statements
This Class A digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.(select the class for your device)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
305 Bend Hill Road
Fredonia, PA 16124 U.S.A.
724-962-9231
www.graceindustries.com
© Grace Industries, Inc.
Printed in U.S.A.
P/N: MX900H USB UI 0616
Model MX900H Micro-Transceiver
With USB Connector
Installation and User’s Information
Only To Be Removed By End User
Model MX900H Micro-Transceiver USB Installation and User Information
MX900H attached
to laptop computer
Transmit/Receive
Indicator LED
USB Connector
Shielded Cable with
USB Connector
(6 feet)
The MX900H Micro-Transceiver is a
compact radio transceiver designed
to send and receive signaling data
transmssions from Grace Industries
telemetry based personal life safety
products. The MX900H is powered
from its USB connection and is suitable for use inside a vehicle along with
other mobile equipment or in a fixed
monitoring location such as a security
office.
With Proper attention given to
these important items, optimum
perfomance can be achieved for
most applications:
1. For Vehicle Installation the
MX900H must be mounted in an
area inside where the antenna
has a clear, unobstructed path to
the outside environment. A typical
location for the MX900H would be on
a front or rear window, or a backseat
side window inside a vehicle.
2. Fixed Location Installation the
MX900H must be mounted in an area
where the antenna has a clear, unobstructed path to the environment where
the Transmitting PASS (man-down
alarm) or SuperCELL® may be used. A
typical location for the MX900H would
be near an unobstructed office window or mounted outside the office and
away from any metal surfaces.
3. The MX900H should also be located as far away as possible from
other radio equipment antennas.
This includes cell phone boosters,
wifi, and other 2-way radio equipment
antennas. It is also recommended to
keep the MX900H antenna a minimum
of six inches away from metal surfaces.
NOTE: Always mount MX900H in a
vertical orientation
4. MX900H comes with 6 feet of
shielded cable with a USB connection.
5. System Check of the MX900H
can be done by viewing the
Receive Indicator LED located on
the surface of the case. When a
SuperCELL® or TPASS® is turned
On, Off, or by activating the Alarm,
the radio signal will cause the
Amber/Yellow Receive LED to flash
several times - indicating signals are
successfully being received by the
MX900H.
MX900H Micro Transceiver
Specifications
Size: 2.0 x 3.0 x .75 inches; Antenna
1.7 inches long
Frequency Range: 902-928 MHz
(frequency hopping spread
spectrum)
FCC ID: J5MXHEM -- Meets FCC
Part 15
Industry Canada ID: 5916A-MXHEM
-- Complies with Canadian ICES-003
Compatibility: Grace Industries Radio-H SuperCELL® and TPASS®3 personal safety and monitoring products
Data Output: Serial USB 2.0, 38400bps ASCII encoded numeric data
The MX900H Micro Transceiver data
output can be monitored with a PC using a terminal emulation program (such
as Windows HyperTerminal) using the
following settings: 38400 bps, N-8-1,
no flow control, VT100 emulation.
NOTE: Drivers MUST be installed
before connecting to PC.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : andy
Create Date                     : 2016:06:10 10:58:45-04:00
Modify Date                     : 2016:06:10 10:58:45-04:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:06:10 10:58:45-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Family 3 (MX) FCC and IC Numbers and label locations 2016-06.indd
Creator                         : andy
Document ID                     : uuid:7541fb01-8bb0-4076-9fed-059f369bb5a1
Instance ID                     : uuid:f824b906-5e6d-408e-98ba-66e62df8e1e7
Producer                        : Acrobat Distiller 11.0 (Windows)
Page Count                      : 3

EXIF Metadata provided by EXIF.tools