Graco Children s A6403 Nursery Unit User Manual 1

Graco Children's Products Inc Nursery Unit 1

Users Manual

RROWNER’S MANUAL©2008 Graco ISPM024BA 3/08 Keep Instructions For Future Reference
2Failure to follow these warnings and the assembly instructions could result in serious injury or death.This device is designed to aid in the monitoring of your child. When using the monitor, you must still provide the supervision necessary for the continued safety of your child. This product is not designed or intended for use as a medical monitor. Always be sure that both the transmitter and receiver are working properly and are within range of each other.• STRANGULATION HAZARD. Keep the adapter cords out of the reach of children. Do not use with extension cords. • DO NOT place the Nursery Unit or its cord within your child’s reach. Do not put the Nursery Unit inside a crib or playard. • Use ONLY with 110-120 volt AC electrical outlets. • Protect the AC adapter cords. Place them so they are not walked on or pinched by furniture or other items. • Allow for proper ventilation when units are in use. Do not cover the Nursery Unit or Parent Units with any object such as a blanket. Do not place it in a drawer or in any location which would muffle the sound or interfere with the normal flow of air. • DO NOT immerse any part of the Nursery Unit, Parent Units, or docking station in water. Clean only with a dry cloth. Warnings to Parents and Other Users
3• DO NOT place unit near water and moisture. Do not use the Nursery Unit outdoors. Do not use the Nursery Unit near possible wet areas, such as a bathtub, shower, wash basin, sink, laundry tub, swimming pool, wet basement, etc. • Keep Nursery Unit away from heat sources, such as fireplaces, radiators, stoves, and TVs or other appliances. Heat can damage the case or electrical parts. • Do not use the Nursery Unit if: • The adapter cords or plugs have been damaged. • The unit has been exposed to liquids. • Unit has been dropped or is damaged. • DO NOT OPEN THE NURSERY UNIT, PARENT UNIT, NURSERY UNIT BASE OR ADAPTERS. No user-serviceable parts inside. Risk of electrical shock, fire or death.• The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.9”) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Statement: WARNING Modifications not authorized by the manufacturer may void users authority to operate this device.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Nursery Unit (A6403)RRParent Unit(A6402)Parent Unit Battery Nursery Unit Base(A5195)(1) AC AdapterOWNER’S MANUAL Keep instructions for future use.Digital Color Video Baby MonitorQuick StartProduct Instruction ManualQuick Start ManualWall Mount(1) AC AdapterBelt Clip5Parts ListAdult assembly required.Tool required: Phillips screwdriver
VIDEO ON/OFF (pg14)CHARGINGSTATUS LIGHT(pg26)LCDSCREENSPEAKERBATTERY LEVEL LIGHT (pg25)POWER ON/OFF (pg13)AC ADAPTER JACK (pg8)UP(pg15) OK (pg15)DOWN (pg15)BATTERY(pg7)6Parent UnitCONNECTIONLIGHT(pg13)SOUND LIGHTSANTENNAVOLUME DOWN (pg24)VOLUME UP (pg24)
7Installing BatteriesThe battery must be plugged into the Parent Unit before the unit will be ready for use. Remove the battery door cover on the Parent Unit by sliding it down.Place battery pack into recess and press wire into the slot.Plug battery into the slot shown in #2. 123
8Replace the battery door.4RAttach the AC Adapter to the unit and plug into wall to charge thebattery. Charge battery for 3 hours.5NOTE: Make sure to use the adapter with the “L” shaped end, as shown.
9Nursery UnitRMICROPHONEBATTERIES(pg10)VIDEO CAMERAPOWER LIGHT(pg26)ON/OFF (pg12)AC ADAPTER JACK(pg11)
10Installing BatteriesUse AC adapters for normal power usage – batteries intended as backup for power outage.(Optional) Use a Phillips head screwdriver to remove thebattery door.NOTE: Screw should be loosened but stay attached to battery door.(Optional)Insert 3 AAA (LR03) batteries.Make sure they are inserted correctly.● Batteries can be useful in the case of a power outage.● Batteries should be replaced periodically.● Batteries should only be used in case of emergencyor for short periods of time.● To save battery power, only audio functions are active while using batteries (NO VIDEO).67
NOTE: Make sure to use the adapter with the straight shaped end, as shown.11Attaching Nursery Unit BaseAttach the AC Adapter to the back of the nursery unit base and plug into wall.Mount nursery unit onto base to operate.89
12RRNursery Unit Power On/Off Depress button for 1 sec. to turn camera on.To change camera angle, swivel the nursery unit top in the desireddirection. Please note that camera cannot swivel completely around.1011
RR9:22pm13Parent Unit Power On/OffPress and hold Power On/Off button for 1 second. Unit will cycle through intro and begin searching for the Nursery Unit.Make sure Nursery Unit is turned on. The live video feed will then be shown.The Connection Light at the top of the unit, will turn from red to green.Connection Light1213
RRPress and hold Power On/Off button for 1 second to turn unit off.14To activate or deactivate the live video feed, press the Video button.Pressing the Video button will allow the user to view the image from the Nursery Unit.1415
RRR15To cycle through thedifferent choices, press up or down.After choosing one of the options, press the “OK” button to make the selection.NOTE: Once you make a selection (OK), the unit will automatically advance you to the next option/screen or return you to the live video feed (if applicable).To set up preferences, press the “OK” button.161718
9:22pm9:22pmUse UP/DOWN tochoose, OK to select22pm9:22pmThe Zoom icon will appear at the top the status screen.Monitor will return to the live video feed if available.16ZoomPress “OK” to open Menu.Press Up/Down to chooseZoom icon. Press “OK” to select it.Press Up/Down to chooseZoom area. Press “OK” to select it.Choose one of the 5 positions192021
9:22pm9:22pm17Press OK to open Menu.Press Up/Down to chooseZoom out icon. Press OK to select it.Monitor will return to live video screen if available. Zoom icon will not be visible on the status screen.Zoom Out2223
9:22pm9:22pm9:22pm9:22pm12 Hour(am/pm)24 HourPress Up/Down to choose your preferred time display format and press OK to select.Press Up/Down to adjust the first digit. Press OK to move to the next digit. Monitor will return to the live feed after adjusting all digits. 18Press “OK” to open Menu.Press Up/Down to chooseClock icon. Press “OK” to select it.Setting Time269:22pm9:22pm07:32 pm2524
9:22pm9:22pm9:22pm9:22pmAlarm OnAlarm Off9:22pm9:22pmm07:22 PM19Setting AlarmPress “OK” to open Menu.Press Up/Down to chooseAlarm Clock icon. Press “OK” to select it.Press Up/Down to choose,OK to select.Press Up/Down to adjust the first digit. Press OK to move to the next digit. Monitor will return to the live feed after adjusting all digits. 272829
9:22pmAlarm Clock icon will appear on the bottom of the screen, next to the time.NOTE: If Alarm Clock icon is not visible, it has not been activated.When Alarm sounds, press any button to deactivate it. Alarm will sound off every 2 seconds for 10 minutes, or until user stops it.20NOTE: Alarm will chimeevery day at the pre-selected time until Alarm isdeactivated, new time isselected. or if unit if powered off.3031RTo silence Alarm, press any button.
21Press Up/Down to choose brightness value, OK to select.(10 levels in all)Monitor will return to the live feed after adjusting all digits. Press “OK” to open Menu.Press Up/Down to chooseBrightness icon. Press “OK” to select it.Brightness32339:22pm9:22pm9:22pm9:22pm10
3435229:22pm9:22pm9:22pm9:22pmEnglishFrançaisEspanolPress “OK” to open Menu.Press Up/Down to chooseLanguage icon. Press “OK” to select it.LanguagePress Up/Down to choose,OK to select.Monitor will return to the live feed after selecting a language.
23VibrationPress Up/Down to choose, OK to select.When “Vibe On” is selected, Parent Unit will vibrate when it is activated with sounds from the Child Unit. Press “OK” to open Menu.Press Up/Down to chooseVibration icon. Press “OK” to select it.9:22pm9:22pm9:22pm9:22pmVibe onVibe off3637
24Volume Up/DownVOLUME DOWN VOLUME UP38• Press the Volume up or Down button to change the Volume.
25Battery InformationParent Unit Battery LevelThe Battery Icon shows how much power is left in the batteries:The Battery icon will cycle while batteries arecharging.• When the batteries are low, the Battery Icon will blink and the monitor will beep once every minute.• When the batteries are extremely low, the screen will display the warning ,“Batteries are very low. Turning off…” The unit will then turn off.• The Battery Level Light will illuminate green when the batteries are OK, red when the batteries are low. The Battery Level Light can be seen easily when the Parent Unit is closed.• Batteries should be disposed of properly by recycling.Parent Unit Battery Charging• Plug the AC Adapter into the Parent Unit to start charging the batteries.LOW FULL39
26• The Charging Status Light will illuminate red while the batteries are being charged, green when the batteries are fully charged. The Charging Status Light can be seen easily when the Parent Unit is closed.Nursery Unit Backup Batteries• Three AAA (LR03) batteries can be optionally installed in the Nursery Unit in case AC power is lost.• When the Nursery Unit is on battery power, only the audio will be transmitted. This helps to extend the battery life.• The Power Light is green when the batteries are good, red when the batteries are low.• The Parent Unit will show “Nursery Unit AC Power Disconnected” when the Nursery Unit is on battery power.• Remove the batteries from the unit if it is no longer being used or will be stored for an extended period of time.
27Accessories/ Wall Mount & Belt ClipAttach wall mount to wallusing a #6 screw anddrywall anchor (not included). Make sure all cords are not within child’s reach. Make sure there is an electrical outlet readily available to plug in the AC adapter. DO NOT use an extension cord.404142Attach the belt clip to theparent unit as shown.Using the belt clip, you can fasten the parent unit to your waist/belt for hands free use.
28Trouble ShootingMost problems have a simple solution.First, check that:• Power is turned ON for both units• Both units are plugged in (or batteries are fresh in Nursery Unit and fully charged in Parent Unit)• Electrical outlet works• Volume is turned up on Parent Unit• Parent Unit is in range of the Nursery UnitParent Unit Only Works With AC Adapter• Check that the battery is properly installed and plugged into connector.No Sound or No Video• Batteries dead or weak — replace or use AC Adapter.• AC Adapter not properly connected — check the connections.• Nursery Unit covered or blocked — remove the obstruction.• Press the Video Button to view the video.
29Weak Sound, Static or Poor Video.• Nursery Unit too far from baby — move closer.• Parent Unit too far from Nursery Unit — move them closer.• Large objects blocking the signal —try repositioning Nursery Unit.• Volume setting too low — turn it up.• Interference from other electrical equipment— eliminate cause of static (TVs, mixers, computers, fans, fluorescent lights, light dimmers, etc.)• Significant amount of obstructions between Parent Unit and Nursery Unit such as walls, ceilings andbuildings. Try moving the Nursery Unit to another part of the room.Shrill Sound (Feedback)• Nursery Unit and Parent Unit too close together— move them farther apart.• Volume set too high — lower the volume.
30Pairing the Parent Unit and Child UnitTo ensure privacy, your Parent Unit is paired with your Nursery Unit at the factory. Your Parent Unit will not work with any other Nursery Units.If your Parent Unit won’t lock onto your Nursery Unit, or you purchased a new Parent Unit or Nursery Unit, follow the procedure below to pair the Parent Unit and Nursery Unit. If you purchased a new Parent Unit, skip Step 1. The new Parent Unit is ready to pair with your Nursery Units.1. Erase the Pairing from the Parent Unit• Press Volume Up, Volume Down, and Video buttons simultaneously for 3 seconds.• The screen will display “Are you sure you want to disconnect from the Nursery Unit?”• Select “Yes” and press “OK”.• The Parent Unit is ready to pair with the Nursery Unit.
312. Pair the Parent Unit with the Nursery Unit• If the Parent Unit is not on, turn it on now.• The Parent Unit will display “Looking for a Nursery Unit to pair with. Turn on your Nursery Unit now.”• Place the Nursery Unit in the same room, as the Parent Unit.• Turn the Nursery Unit Off then On again using the On/Off Button. The green power light should come on.• Within a few seconds, the Parent Unit will find the Nursery Unit. The Parent Unit will display “Nursery Unit found. Pairing complete.”• The Parent Unit will begin monitoring normally.Nothing happened when I turned on the Nursery Unit. What do I do?• With the Parent Unit on, turn the Nursery Unit off, and then on again.• If there is still a problem, repeat steps 1 and 2.
32Replacement PartsWarranty Information (USA) To purchase parts or accessories or for warranty information in the United States, please contact us at the following:Graco Children’s Products150 Oaklands Blvd.Exton, PA 19341www.gracobaby.comor1-800-345-4109Product Registration (USA)To register your Graco product fromwithin the U.S.A. visit us online atwww.gracobaby.com/productregistration.We currently do not accept product registrations fromthose living outside the United States of America.

Navigation menu