Graco 233725 Line Driver User Manual To The 9f21e4a9 212b 4269 83f7 E7cc2be11dee

User Manual: Graco 233725 to the manual

Open the PDF directly: View PDF .
Page Count: 12

Download
Open PDF In Browser	View PDF

OPERATION –
UTILIZAÇÃO –
FONCTIONNEMENT –
FUNCIONAMIENTO

309402

Rev. C

Line Drivert
Model 233725
10 mph (16 kph) Maximum Operating Speed / de vitesse de fonctionnement maximum / de
velocidade operando se máxima / de la velocidad de funcionamiento máxima

Related manuals
Manuais associados
Manuels afférents
Manuales relacionados

. . . . . . . 309404

. . . . . . . 309405

All models not available in all countries.
Nem todos os modelos existem à disposição em todos os países.
Tous les modèles ne sont pas disponibles dans tous les pays.
Hay modelos que no se distribuyen en todos los países.

How To Perform:
S Component Identification . . . . . . . . . . . . . . . .
S Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GRACO INC.

4
6
9
9

P.O. BOX 1441

MINNEAPOLIS, MN

ECOPYRIGHT 2001, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001

55440–1441

WARNING

MOVING VEHICLE HAZARD
Careless and reckless behavior causes
accidents. Falling from vehicle, running into
people or objects, or being struck by other
vehicles may result in serious injury or
death.

Use appropriate traffic control in all traffic
areas

Do not step on forward/reverse pedals

Make turns slowly

Do not carry passengers

Do not operate on slopes greater than 15_

Loss of traction may occur going downhill

Reference Manual on Uniform Traffic
Control Devices (MUTCD), U.S. Department of Transportation, Federal Highway
Administration or local highway and transportation regulations for proper traffic
control.

Do not make turns greater than 45_

Do not tow

Use with line striping equipment only

FIRE AND EXPLOSION HAZARD
Fuel spilled on a hot surface can
cause a fire or explosion and serious
bodily injury or death. Shut off engine
and let engine cool before filling tank.

HOT SURFACE HAZARD
Engine and drive housing may be very
hot during operation and could burn skin
if touched.

TOXIC FUMES HAZARD
Engine produces carbon monoxide which is a
deadly gas. Do not operate in an enclosed
area. Breathing carbon monoxide may result
in serious injury or death.

309402

WARNING
MOVING VEHICLE HAZARD
Careless and reckless behavior causes
accidents. Falling from vehicle, running into
people or objects, or being struck by other
vehicles may result in serious injury or
death.

MOVING VEHICLE HAZARD
Careless and reckless behavior causes
accidents. Falling from vehicle, running into
people or objects, or being struck by other
vehicles may result in serious injury or
death.

Use appropriate traffic control in all traffic
areas

Do not step on forward/reverse pedals

Make turns slowly

Do not carry passengers

Do not operate on slopes greater than 15_

Loss of traction may occur going downhill

Do not make turns greater than 45_

Do not tow

Use with line striping equipment only

FIRE AND EXPLOSION HAZARD
Fuel spilled on a hot surface can
cause a fire or explosion and serious
bodily injury or death. Shut off engine
and let engine cool before filling tank.

HOT SURFACE HAZARD
Engine and drive housing may be very
hot during operation and could burn skin
if touched.

TOXIC FUMES HAZARD
Engine produces carbon monoxide which is a
deadly gas. Do not operate in an enclosed
area. Breathing carbon monoxide may result
in serious injury or death.

309402

Component Identification
T

S
A

K
M
R
J

B
P
N

Adjust coupler pressure
on 1–7/8 in. receiver ball
before use

D
H

Wheel Release

Engine

Engine ON/OFF

Light

Tires: inflate to equal and
Rated Pressure

Direction/Speed Pedals

Step Plate

Coupler

Hitch

Safety Pin Location

Handle Open

Handle Locked

Parking Brake

Storage

Seat Adjustment

Operator Seat

Hydraulic Fill Cap

309402

Setup
Unpack Line Driver

1. Remove Line Driver from packing.

2. Disengage drive wheels. This makes
it easier to roll the Line Driver.

Release

Engage

3. Hand tighten after use.

Connect Hitch Receiver to Line Striper – Hitch Receiver Kit 245321 Manual 309405

Connect Line Driver to Line Striper

1. Install Line Driver hitch coupler to LineLazer hitch receiver ball.
(M)

2. Latch coupler to locked position (M)

3. Insert safety pin in latch

309402

Setup
Individual Operator Adjustments
Seat
Adjust seat forward/backward with lever (R) below seat

Pedals
Suggestion: Adjust one pedal for full motion forward
and one for full motion in reverse. This reduces fatigue.

1. Loosen two bolts (C) at
underside of pedals

Example:

2. Rotate pedal to desired position

Forward

3. Tighten bolts.

Striper Handle
Bars
Refer to your striper manual

309402

Reverse

Startup
1. Check engine oil level. Add SAE 10W–30
(summer) or 5W–20 (winter), if necessary.
Note: Keep engine oil at full level to avoid
nuisance stalls because Oil Alert may sense
low oil levels during change of direction of
Line Driver

(cold)

2. Fill fuel tank.

3. Check hydraulic oil level. Add only Mobil 1 (15W–50)
synthetic oil. Hydraulic system capacity is 2 quarts.
Fill to baffle top

309402

Startup
4. Start engine
a. Engage parking brake
b. Move fuel valve to open

c. Move choke to closed
d. Set throttle to fast
e. Set engine switch ON
f. Pull starter cord
g. After engine starts, move
choke to open
h. Set throttle to desired speed for
striping.

309402

Operation
Note: Line Driver motion is forward
and reverse. Turns are made with the
striper.

1. Squeeze hand control and
release caster wheel.

2. Push striper handle bars to
begin desired turn.

309402

Operation
Note: Line Driver stops when both
feet are removed from pedals

1. Move pedal(s) forward to
drive Line Driver forward

2. Move pedal(s) reverse to
drive Line Driver reverse

3. Switching from forward to reverse creates a braking action

Reverse

Forward

4. Set parking brake when not
operating Line Driver
RELEASE

ENGAGE

309402

Note: The Line Driver can not be
started if the parking brake is not set.
The operator must be seated when
the parking brake is released or the
Line Driver will stop running.

Troubleshooting
PROBLEM

CAUSE

SOLUTION

Engine does not start

Parking brake not engaged. Engine
switch OFF, no gasoline or low oil

Set Brake. Consult engine manual, supplied

Engine races to high rpm – stalls
during operation

Worn governor

Consult engine manual, supplied

Engine operates, Line Driver does
not move forward or reverse

Low hydraulic oil

Fill with Mobil 1 (15W–50) synthetic oil

Engine operates, Line Driver moves
slowly in forward and reverse

Low hydraulic oil. Parking brake is set

Fill with Mobil 1 (15W–50) synthetic oil. Release
parking brake.

Wheel release is open.

Close; hand tight.

Engine shuts off when operator exits Line Driver

Safety switch

Set parking brake

Engine continues to run when operator exits Line Driver and parking
brake is not set

Safety switch

Adjust and set parking brake. Replace safety
switch and/or any connecting wires.

Engine misses during turns and forward and reverse changes

Engine oil low

Consult engine manual for proper oil

Parking brake does not keep Line
Driver from moving

Parking brake needs adjustment

Adjust brake. Manual 309404.

Line Driver creeps in forward or reverse direction

Control linkage needs adjustment

Adjust control linkage. Manual 309404.

309402

Graco Warranty
Graco warrants all equipment listed in this manual which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special extended or limited
warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment
determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in
accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or
substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance or structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the
date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT
NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, gas engines,
switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance
in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties
reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures
judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées.

ADDITIONAL WARRANTY COVERAGE
Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty
Program”.

Graco Phone Number
TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor closest to you:
1–800–690–2894 Toll Free.

All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
mm 309402
This manaul contains English, Portuguese, French, Spanish
Graco Headquarters: Minneapolis
International Offices: Belgium, Korea, China, Japan

GRACO INC.

P.O. BOX 1441

MINNEAPOLIS, MN

http://www.graco.com
10/2001, Revised 8/2006

309402

55440–1441

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Keywords                        : 309402C, Z027847
Modify Date                     : 2006:08:14 13:46:57-05:00
Create Date                     : 2006:08:14 13:28:30-05:00
Metadata Date                   : 2006:08:14 13:46:57-05:00
Format                          : application/pdf
Title                           : Line Driver
Description                     : Line Striping
Creator                         : Robert Daly
Subject                         : 309402C, Z027847
Document ID                     : uuid:5324c976-4e71-43f7-8b04-7f3951af7c7d
Instance ID                     : uuid:29aaf5a5-e9d8-45be-90f2-fd907000f2b2
Page Count                      : 12
Author                          : Robert Daly

EXIF Metadata provided by EXIF.tools

Graco 233725 Line Driver User Manual To The 9f21e4a9 212b 4269 83f7 E7cc2be11dee

Navigation menu

Versions of this User Manual:

Views

Navigation