Graco 312863C Grease Pump System En Users Manual System, Instructions Parts,

: Graco Graco-312863C-Grease-Pump-System-En-Users-Manual-686375 graco-312863c-grease-pump-system-en-users-manual-686375 graco pdf

Open the PDF directly: View PDF .
Page Count: 10

Download
Open PDF In Browser	View PDF

Instructions - Parts List

Grease Pump
System

312863C
EN

Important Safety Instructions
Read all warnings and instructions in this manual. Save these instructions.
See supplied pump and motor manuals for important Safety and Warnings information and installation,
operation and service instructions for those components.
See page 2 for model information, including maximum working pressure.
.

Models 247973 and 247976 Shown
ti12196a

Models

Models
NOTICE
To prevent damage to Data Trak soft key buttons, do
not press the buttons with sharp objects such as pens,
plastic cards, or fingernails.

Maximum Working Pressure
Models with Data Trak
Air
Part
No.

Description

NXT
Air
Motor
Size

Lower
Size

Fluid

psi

MPa

bar

psi

MPa

bar

(cc)

Floor
Stand or
RAM

247973

14:1 Check-Mate

3400

500

Floor Stand

100

0.7

7.0

1400

9.6

96.5

247974

29:1 Check-Mate

3400

250

Floor Stand

100

0.7

7.0

2900

20

200

247975

63:1 Check-Mate

3400

100

Floor Stand

72

0.5

4.9

4500

31

310

247976

26:1 Check-Mate

6500

500

Floor Stand

100

0.7

7.0

2600

18

179.2

247977

55:1 Check-Mate

6500

250

Floor Stand

100

0.7

7.0

5500

38

380

247978

68:1 Check-Mate

6500

200

Floor Stand

78

0.54

5.38

5300

36.5

365.4

247979

14:1 Check-Mate

3400

500

RAM

100

0.7

7.0

1400

9.6

96.5

247980

63:1 Check-Mate

3400

100

RAM

72

0.5

4.9

4500

31

310

247981

68:1 Check-Mate

6500

200

RAM

78

0.54

5.38

5300

36.5

365.4

Maximum Working Pressure
Models without Data Trak, with De-Icing
Air
Part
No.

2

Description

NXT
Air
Motor
Size

Lower
Size

Fluid

psi

MPa

bar

psi

MPa

bar

(cc)

Floor
Stand or
RAM

24E006

14:1 Check-Mate

3400

500

Floor Stand

100

0.7

7.0

1400

9.6

96.5

24E008

29:1 Check-Mate

3400

250

Floor Stand

100

0.7

7.0

2900

20

200

24E010

63:1 Check-Mate

3400

100

Floor Stand

72

0.5

4.9

4500

31

310

24E007

26:1 Check-Mate

6500

500

Floor Stand

100

0.7

7.0

2600

18

179.2

24E009

55:1 Check-Mate

6500

250

Floor Stand

100

0.7

7.0

5500

38

380

24E011

68:1 Check-Mate

6500

200

Floor Stand

78

0.54

5.38

5300

36.5

365.4

312863C

Setup and Parts

Setup and Parts
Models: 247973 and 24E006 14:1, 247976 and 24E007 26:1- Floor Stand

8
5

2

9
4

7

1, 11
13
3

12
6
16†

Ref.
No.
1

2
3

4
5
6
7

Part No. Description
Qty.
160022 FITTING, union, adapter 90°,
1
model 247973
116648 FITTING, swivel, 1” MXF, model
1
247976
208610 HOSE, air, coupled, 6-foot
1
115042 HOSE, fluid, coupled, 6 foot, model
1
247973
244657 HOSE, fluid, coupled, 6 foot, model
1
247976
157785 FITTING, air, swivel
1
244524 WIRE, ground, assembly, with
1
clamp
223952 ADAPTER, pump
1
512152 VALVE, ball, 1” NPT(F), model
1
247973
116471 VALVE, ball, 1” FBE, model 247976 1

312863C

ti12196a

Ref.
No.
8

9
11
12
13
16†
†

Part No. Description
Qty.
P14MCS PUMP, 14:1, 3400/500 CS SD,
1
model 247973
P26MCS PUMP, 26:1, 6500/500 CS SD,
1
model 247976
P14DCS PUMP, 14:1, 3400/500 CS SD,
1
model 24E006
P26DCS PUMP, 26:1, 6500/500 CS SD,
1
model 24E007
NXT011 CONTROL, air integrated, locking
1
116650 COUPLING, 1” x 1-1/2”
208390 VALVE, ball
1
222776 KIT, repair, mounting (4.5 cm)
1
CE Identification label
1
Attention: To comply with CE directives, the CE
identification label must be affixed to the floor
stand as shown. Permanently mark the date of
assembly on the label.

3

Setup and Parts

Models: 247974 and 24E008 29:1, 247977 and 24E009 55:1,
247978 and 24E011 68:1- Floor Stand

8
2

5

9
4
1, 11

7

13
14

12
6

16†
ti12195a

Ref.
No.
1

2
4
5
6
7
8

4

Part No. Description
Qty.
116648 FITTING, swivel, 1” MXF, model
1
247974
115262 FITTING, elbow, adapter 90°,
1
model 247977, 247978
208610 HOSE, air, coupled, 6-foot
1
157785 FITTING, air, swivel
1
244524 WIRE, ground, assembly, with
1
clamp
223952 ADAPTER, pump
1
116471 VALVE, ball, 1” FBE, model 247974 1
521477 VALVE, ball, 1”, model 247977,
1
247978
P29MCS PUMP, 29:1, 3400/250 CS SD,
1
model 247974
P55MCS PUMP, 55:1, 6400/250 CS, model
1
247977
P68MCS PUMP, 68:1, 6400/200 CS, SD,
1
model 247978
P29DCS PUMP, 29:1, 3400/250 CS SD,
1
model 24E008
P55DCS PUMP, 55:1, 6400/250 CS, model
1
24E009

Ref.
No.

9

11
12
13
14
16†

†

Part No. Description
Qty.
P68DCS PUMP, 68:1, 6400/200 CS, SD,
1
model 24E011
NXT011 CONTROL, air integrated, locking,
1
model 247974 and 247977
NXT031 CONTROL, air, locking, 85 psi,
1
model 247978, 24E011
C38302 FITTING, nipple, CS, 1” npt, model
1
247977, 247978
208390 VALVE, ball
1
222776 KIT, repair, mounting (4.5 cm)
1
244657 HOSE, fluid coupled, 6 foot
1
CE Identification label
1

Attention: To comply with CE directives, the CE
identification label must be affixed to the floor
stand as shown. Permanently mark the date of
assembly on the label.

312863C

Setup and Parts

Models: 247975 and 24E010 63:1- Floor Stand

8
5

2

9
4
1, 15

7

13
12

14

6
16†
ti12194a

Ref.
No.
1
2
4
5
6
7
8

9
12
13
14
15
16†
†

Part No.
115262
208610
157785
244524

Description
FITTING, elbow, adapter 90°
HOSE, air, coupled, 6-foot
FITTING, air, swivel
WIRE, ground, assembly, with
clamp
223952 ADAPTER, pump
521477 VALVE, ball, 1”
P63MCS PUMP, 63:1, 3400/100 CS SD
model 247975
P63DCS PUMP, 63:1, 3400/100 CS SD
model 24E010
NXT031 CONTROL, air, locking, 85 psi,
model 247978
208390 VALVE, ball
222776 KIT, repair, mounting (4.5 cm)
244657 HOSE, fluid, coupled, 6 foot
202965 FITTING, union, adapter
CE Identification label

Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Attention: To comply with CE directives, the CE
identification label must be affixed to the floor
stand as shown. Permanently mark the date of
assembly on the label.

312863C

5

Setup and Parts

Models: 247979 - RAM

16†

8

7
4
2
3
1, 11

ti12192a

Ref.
No.
1
2
3
4
7
8
11
16†
†

6

Part No. Description
119363 FITTING, swivel
208610 HOSE, air, coupled, 6-foot
115042 HOSE, fluid, coupled, 6 foot
157785 FITTING, air, swivel
512152 VALVE, ball, 1” NPT(F)
CM53BA SUPPLY UNIT, 14:1 smart, 3.0,
RAM, 200L
116650 COUPLING, 1” x 1-1/2”
CE Identification label

Qty.
1
1
1
1
1
1
1

Attention: To comply with CE directives, the CE
identification label must be affixed to the tie beam
as shown. Permanently mark the date of assembly on the label.

312863C

Setup and Parts

Models: 247980 - RAM

16†

8

9*
2

7
4
3
1, 10

ti12347a

Ref.
No.
1
2
3
4
7
8
9*
10
16†
†

Part No. Description
115262 FITTING, union, adapter 90°
208610 HOSE, air, coupled, 6-foot
244657 HOSE, fluid, coupled, 6 foot
157785 FITTING, air, swivel
521477 VALVE, ball, 1”
CM17BA SUPPLY UNIT, 63:1
120306 VALVE, safety, 85 psi
202965 FITTING, union, adapter
CE Identification label

Qty.
1
1
1
1
1
1
1
1
1

Attention: To comply with CE directives, the CE
identification label must be affixed to the tie beam
as shown. Permanently mark the date of assembly on the label.

* Do not use the Safety Valve 103347 included with
item 8, Supply Unit CM17BA. Instead use item 9, the
85 psi, Safety Valve 120306.

312863C

7

Setup and Parts

Models: 247981 - RAM

8

16†

2
7
4

3
1, 10

ti12193a

Ref.
No.
1
2
3
4
7
8
10
16†
†

8

Part No. Description
115262 FITTING, union, adapter 90°
208610 HOSE, air, coupled, 6-foot
244657 HOSE, fluid, coupled, 6 foot
157785 FITTING, air, swivel
521477 VALVE, ball, 1”
CM2RBASUPPLY UNIT, 68:1 SMART, 3.0
RAM 200
C38302 FITTING, nipple, CS, 1” npt
CE Identification label

Qty.
1
1
1
1
1
1
1
1

Attention: To comply with CE directives, the CE
identification label must be affixed to the tie beam
as shown. Permanently mark the date of assembly on the label.

312863C

Notes

Notes

312863C

9

Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.

Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: 612-623-6928 or Toll Free: 1-800-533-9655, Fax: 612-378-3590

All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 312863

Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2008, Graco Inc. is registered to ISO 9001
www.graco.com
Revised March 2012



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Marked                          : True
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Keywords                        : Oil Pumping 312863
Copyright                       : yes, revised March 2012
Job Ref                         : Z071587
Web Statement                   : Oil Pumping System
Create Date                     : 2005:04:27 11:19:54Z
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2013:10:01 17:16:30-05:00
Metadata Date                   : 2013:10:01 17:16:30-05:00
Format                          : application/pdf
Creator                         : Terri Howard
Description                     : Oil Pumping System
Title                           : 312863C Grease Pump System, Instructions-Parts, EN
Subject                         : Oil Pumping 312863
Document ID                     : uuid:342d5b16-bd3c-4526-8c76-22970929c057
Instance ID                     : uuid:381c7ccc-4e69-46dc-860d-e4371346724a
Page Count                      : 10
Author                          : Terri Howard

EXIF Metadata provided by EXIF.tools