Graco 333023F Reactor 2 E 30 And Xp2 Proportioning Systems Users Manual Systems, Operation, English

2015-04-02

• toc
  • Contents
    • Warnings
    • Important Isocyanate Information
      • Isocyanate Conditions
      • Material Self-Ignition
      • Keep Components A and B Separate
      • Moisture Sensitivity of Isocyanates
      • Foam Resins with 245 fa Blowing Agents
      • Changing Materials
    • Models
      • Reactor 2 E-30 and E-30 Elite
      • Reactor 2 E-XP2 and E-XP2 Elite
    • Approvals
    • Accessories
    • Supplied Manuals
    • Related Manuals
      • Component Manuals in English:
    • Typical Installation, without circulation
    • Typical Installation, with system fluid manifold to drum circulation
    • Typical Installation, with gun fluid manifold to drum circulation
    • Component Identification
      • Advanced Display Module (ADM)
        • ADM Display Details
        • Navigating the Screens
        • Icons
      • Electrical Enclosure
      • Motor Control Module (MCM)
      • Temperature Control Module (TCM) Cable Connections
    • Installation
    • Setup
      • Grounding
      • Close gun fluid manifold valves A and B
      • General Equipment Guidelines
      • Connect Power
      • Supply Wet Cups With Throat Seal Liquid (TSL)
      • Install Fluid Temperature Sensor
      • Register and Activate the Graco InSite
    • Advanced Display Module (ADM) Operation
      • Setup Mode
        • Set Password
      • Advanced Setup Screens
        • Advanced Screen 1 — General
        • Advanced Screen 2 — Units
        • Advanced Screen 3 — USB
        • Advanced Screen 4— Software
      • System 1
      • System 2
      • Recipes
        • Add Recipe
        • Enable or Disable Recipes
      • Run Mode
        • Home — System Off
        • Home — System Active
        • Home — System With Error
        • Targets
        • Maintenance
        • Cycles
        • Events
        • Errors
        • Troubleshooting
        • Diagnostic
        • Job Data
        • Recipes
        • System Events
    • Startup
    • Fluid Circulation
      • Circulation Through Reactor
      • Circulation Through Gun Manifold
    • Jog Mode
    • Spraying
      • Spray Adjustments
      • Manual Hose Heat Mode
        • Enable Manual Hose Mode
        • Disable Manual Hose Mode
    • Shutdown
    • Pressure Relief Procedure
    • Flushing
    • Maintenance
      • Preventative Maintenance Schedule
      • Proportioner Maintenance
        • Wet Cup
        • Packing Nuts
        • Fluid Inlet Strainer Screens
        • Grease Circulation Valves
        • ISO Lubricant Level
        • Moisture
        • Gun Mix Chamber Ports
        • Gun Check Valve Screens
        • Dust Protection
        • Vent Holes
      • Flush Inlet Strainer Screen
      • Pump Lubrication System
    • Errors
      • View Errors
      • Troubleshoot Errors
    • Troubleshooting
      • Error Codes and Troubleshooting
    • USB Data
      • Download Procedure
      • USB Logs
        • Event Log
        • Job Log
        • Daily Log
        • System Software Log
        • Blackbox Log File
        • Diagnostics Log File
      • System Configuration Settings
      • Custom Language File
        • Create Custom Language Strings
      • Upload Procedure
    • Performance Charts
      • Proportioners For Foam
      • Proportioners For Coatings
    • Technical Specifications
    • Graco Extended Warranty for Reactor® 2 Components
      • Graco Information
• tables
  • Table 1 : ADM Keys and Indicators
  • Table 2 ADM LED Status Descriptions
  • Table 3 MCM Module LED (MB) Status Descriptions
  • Table 4 Power Cord Requirements
  • Table 5 Fusion Air Purge, Round Pattern
  • Table 6 Fusion Air Purge, Flat Pattern
  • Table 7 Fusion Mechanical Purge, Round Pattern
  • Table 8 Fusion Mechanical Purge, Flat Pattern