Graco 339996En D Promix 2Ks And 3Ks Users Manual Brochure
2015-04-02
: Graco Graco-339996En-D-Promix-2Ks-And-3Ks-Users-Manual-685723 graco-339996en-d-promix-2ks-and-3ks-users-manual-685723 graco pdf
Open the PDF directly: View PDF 
.
Page Count: 12
ProMix® 2KS and 3KS
Two- and Three-Component Electronic Proportioning System
2
ProMix 2KS Features
• Manual and automatic configurations
• Intrinsically safe fluid panels allow for integration into
hazardous areas*
• Single or multi-color and catalysts
• Accurate ratio assurance for superior finish quality
• Simple programming allows fast set up and efficient
process control
• Advanced web interface provides consolidated
system management and reporting
Key Materials
• Solventborne epoxies and polyurethanes
• Waterborne epoxies and polyurethanes
• Acid catalyzed materials
Why Electronic Proportioning?
• Offers the highest degree of ratio assurance
• Provides critical process variable feedback
• Built-in system safeguards
• Effective color change solution
• Efficient material tracking and reporting
Graco’s Electronic Proportioners
ProMix® 2KS offers precise and reliable electronic
proportioning for a broad range of solventborne,
waterborne and acid catalyzed materials.
From entry level to upgraded applications, the
ProMix 2KS provides flexibility and increased
efficiency – including optimized flushing
sequences and an optional third purge
valve to properly manage waterborne
urethanes for manual and automatic operation.
Upgrade to ProMix 3KS
ProMix 3KS offers precision mixing of three
component materials and accurately reduces
your material to the correct spray viscosity as
conditions change.
*All accessories and installations need to meet local, state and national codes
Increase Efficiency
and Productivity!
3
1
2
3
ProMix 2KS is available in a variety of system level configurations. Each one includes an EasyKey™ display
along with a Smart Fluid Panel. Color and catalyst change is easily integrated with a plug-and-play control
module and valves.
Manual systems benefit from an additional
Remote Operator Station that allows fingertip
control inside the spray booth.
Optional flow control is cleanly integrated without incorporating
a mixed material line meter. Pressure and flow loops provide
fast step changes with superior closed loop control.
This fluid panel can be easily integrated near the spray
gun for a shorter mixed material line, faster color changes
and less waste. Also available with flow control.
Three Systems in One
Use up to 30 colors and 4 catalysts
Manual Wall Panel
Automatic Wall Panel
Automatic RoboMix Panel
4
Graco’s EasyKey user interface offers
simple navigation, multiple language
capabilities and a high degree of reliability.
The large LCD display screen is easy to
read and operate during machine set up
and process monitoring.
The independent touch pad keeps
contaminants off the screen while the
large keys allow for clear data entry.
Standby
1.0:1
0 min
3-20-2008
9:43
A
B
0.00:1
1
FP1
FP1
1
4
Large
LCD
Display
Left/Right
Screen Toggle
Up/Down
Screen
Toggle
Independent
Keypad
Enclosure
Access Key Lock
Password
Protected
System Set-Up
The remote operator station can be
mounted inside the spray booth or near
the operator for quicker response times.
The station offers easy-to-use controls for
mixing, standby, purging, reading/clearing
alarms, inputting job complete and recipe
select functions.
Simple & Efficient Operation
High-ratio assurance with easy-to-use components
Alarm Clear
Job Complete
Recipe and Alarm
Code Indicator
Mix PurgeStandby
Enter
Recipe
Select
Detachable
Wall Bracket
EasyKey Display
Remote Operator Station
5
Productive Panels
Intrinsically safe fluid panels offer increased proportioning and flushing functionality, resulting in improved process performance.
Versatile Dosing
Multiple sequential dose sizes allow the system to meet a broad range of applications without sacrificing performance and quality.
Dynamic dosing provides additional proportioning technology to meet unique applications needs.
On-Ratio Performance
Volume based dosing provides exceptional ratio accuracy across varying flow rates or gun triggering conditions. On-the-fly
monitoring and compensation enhance performance and finish quality.
Consistent Mix Quality
Optimized mix chamber hardware, along with high-speed processors and dispense valves, generate precise performance and
consistent, high quality mixed material.
Fast Color Change with Reduced Waste
New fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing. Manifold dump valves allow
simultaneous purging and loading – reducing color change time and providing better waste containment.
• Up to 50:1 mix ratio for a variety of applications
• Up to 4000 psi (275.6 bar) working pressure for single
color and catalyst, supports all spray technologies
• Supports two manual spray guns and gun flush boxes
• Up to 50:1 mix ratio for a variety of applications
• Up to 250 psi (17.2 bar) working pressure
• Lightweight, compact design allows easier
integration closer to the spray gun
• Can be interfaced with manual spray guns
RoboMixWall Panel
Unmatched Functionality
Wall & RoboMix Fluid Panel Features
6
1
2
3 5
4Integration Chamber
(25 cc shown)
Accommodate a wide range of
hardware to support multiple
dose size options. Optimizes
fluid manifold for particular
application needs.
Fluid Porting
Compact, low volume design
with no material dead spots,
provide faster flushing time
and less waste.
50 cc Integrator 10 cc Integrator Dynamic Dosing
Shutoff and Sample Valves
Ensure accurate volume measurements
for meter calibrations and ratio checks
with positive shutoff and
convenient sampling.
Dispense Valves
Remove high speed
cartridge style valves
without disconnecting fluid
lines for easier serviceability.
Manifold Flush Valves
Flush mixed material without
wasting premixed resin and
catalyst. Add a third valve to
the resin side for enhanced
flushing, especially with
waterborne materials.
11
5
2
3
4
3
2
Fluid Manifold
7
Complete Your System!
Today’s demanding applications require more than just precise and reliable proportioning from a ProMix 2KS.
Graco offers a variety of flow meter technologies and accessories that will enhance your finishing operation.
Flow Meters
• Complete line of spur gear, helical gear, and non-intrusive
Coriolis meters
• Supports a broad range of material types and
physical characteristics
Advanced Web Interface screen shot
G3000 meter
Color Change Module
Coriolis meter
Gun Flush Box
Integrated
Fluid Regulator Module
External
Fluid Regulator Module
Low Pressure Color Stack
Intrinsically Safe Color and
Catalyst Change Module
• Provides easy and flexible installation without running
long pneumatic lines
• Accommodates future color and catalyst needs with
upgradable module
Gun Flush Box
• Automated flushing system for manual spray guns
• Eliminates manual gun triggering for more accurate
flushing and filling, and less waste
Integrated Flow Control
• Eliminates a long pneumatic control line and
associated lag with intrinsically safe control module
• Produces quick responses and superior process control
with on-board electronics and control hardware
• Provides accurate and consistent flow control for
increased material savings
Advanced Web Interface
• Perform quick and easy system configuration and recipe set up
• Offers convenient process monitoring and streamlines data
gathering and reporting
• Manages operations more efficiently by networking multiple
ProMix 2KS systems to a single PC
Communication Gateway
• Provides network integration for automatic systems
• Offers integration flexibility with multiple protocol capabilities
• Reduces installation time with quick plug-and-play set up
Expanded Options
8
Specify your base system.
ProMix 3KS Example System
T
Three
K
Component
X
Meter
X
Color
Valves
0
0
0
0
Choose the ProMix 3KS Module to fit your system.
T K Meter Color Valves 0 0
T K 0 = No Meter 0 = No Valves (single color) 0 0
1 = G3000 1 = 2 Color LP
2 = G3000 HR 2 = 4 Color LP
3 = 1/4” Coriolis 3 = 2 Color HP
4 = S3000 4 = 4 Color HP
Step 1: Identify
Step 2: Upgrade!
Precision Mixing of Three-Component Materials
• Manual or automatic operation
• Up to 25 colors, 4 catalysts, and 4 reducers in modular color change system
• Intrinsically safe fluid panel for operation in hazardous areas*
• Optimized flushing sequences including third flush option
*All accessories and installations need to meet local, state and national codes
ProMix 3KS Technical Specifications ProMix 3KS Accessories
Mix Ratio Range*
Sequential Dosing................................ 1st stage: 0.1:1 to 50:1
2nd stage: 0.1:1 to 50:1
Dynamic Dosing .................................. 1st stage: 0.1:1 to 30:1
2nd stage: 0.1:1 to 30:1
Ratio Accuracy ......................................... up to + 1% minimum (user selectable)
External Power Supply Requirements ...... 85-250Vac, 50/60 Hz. 2 amps max draw,
15 amp circuit breaker required,
8 to 14 AWG power supply wire gauge
Operating Temperature Range ................. 41 to 122°F (5 to 50°C)
Noise Level
Sound pressure level ........................... below 70 dBA
Sound power level ............................... below 85 dBA
Wetted Parts ............................................ 303 SST, 17-4 SST, PTFE, perfluoroelastomer,
tungsten carbide with nickel binder
Weight
3KS Wall fluid panel............................. 32.6 lb (14.8 kg)
Power/Barrier Assy .............................. 15.2 lb (6.9 kg)
*Ratio ranges are dependent on flow rate, dose size and meter resolution
Cables
123277 6 ft Yellow Color Change/Booth Control
123280 50 ft Yellow Color Change/Booth Control
123273 10 ft Green CAN Cable
123274 25 ft Green CAN Cable
123271 50 ft Red Power Cable
123272 100 ft Red Power Cable
Miscellaneous Kits
16A732 3K Floor Stand Extension
Extends 15V950 2KS floor stand for 3KS
use
Upgrade to ProMix 3KS
9
Maximum working air pressure ............................................... 100 psig (7 bar)
Air supply ........................................................75 to 100 psig (5 to 7 bar)
Air filtration
Air logic (Graco supplied) ..................................................... 5 micron
Air purge (user supplied) ............................................ 30 micron clean/dry
Air for atomizing (user supplied) .............................. minimum of 30 micron clean/dry
Mix ratio range
Sequential dosing........................................................ 0.1:1 to 50:1
Dynamic dosing ......................................................... 0.1:1 to 30:1
Ratio accuracy........................................... up to ±1% minimum (user selectable)
Fluids handled .............................. one or two component: solvent and waterborne paints;
polyurethanes; epoxies; acid catalyzed varnishes; moisture sensitive isocyanates
Fluid filtration ............................................................. 100 mesh min
Flow meters:
METER TYPE MAX PRESSURE FLOW RANGE VISCOSITY
G250 Spur Gear 250 psi (17.2 bar) 75-3800 cc/min 20-3000 cps
G250HR Spur Gear 250 psi (17.2 bar) 38-1900 cc/min 20-3000 cps
G3000 Spur Gear 4000 psi (275 bar) 75-3800 cc/min 20-3000 cps
G3000HR Spur Gear 4000 psi (275 bar) 38-1900 cc/min 20-3000 cps
HG6000 Helical Gear 6000 psi (413 bar) 50-7500 cc/min 30-100,000 cps
1/4” Coriolis Single Tube 2300 psi (158 bar) 20-3800 cc/min* 0.1-3000 cps
3/8” Coriolis Single Tube 2300 psi (158 bar) 50-3800 cc/min* 0.1-3000 cps
S3000 (Solvent Meter) Spur Gear 3000 psi (206 bar) 50-2000 cc/min 0.5-1000 cps**
*Ratio and K-factor dependent
**No filled materials
Component working pressure
Wall fluid panel (no meters) ........................................... 4000 psig (275 bar)
RoboMix fluid panel (G250 meters)...................................... 250 psig (17.2 bar)
Flow control regulator ................................................. 200 psig (13 bar)
Low pressure color change valves ...................................... 300 psig (20.6 bar)
High pressure color change valves .................................... 3000 psig (206.7 bar)
External power supply requirements ................... 85-250 Vac, 50/60 Hz. 2 amps maximum draw,
15 amp maximum circuit breaker required,
8 to 14 AWG power supply wire gauge
Operating temperature range........................................... 41 to 122°F (5 to 50°C)
Noise level
Sound pressure level .................................................... below 70 dBA
Sound power level ...................................................... below 85 dBA
Wetted parts ...................................... 303 SST, 17-4 SST, PTFE, perfluoroelastomer,
tungsten carbide with nickle binder
Weight
EasyKey display ...................................................... 21.75 lb (9.8 kg)
Remote operator station................................................ 0.95 lb (0.43 kg)
Wall fluid panel (no meters) ............................................... 50 lb (22.7 kg)
RoboMix fluid panel (G250 meters included)................................. 31.6 lb (14.3 kg)
Flow control regulator ..................................................... 4 lb (1.8 kg)
Approved for hazardous locations ......................... US and Canada - class 1 Div 1 Group D T3
Europe - Zone 0 Ex ia IIA T3/ATEX II2G T3
Environmental condition rating...................indoor use, pollution degree (2), installation category II
Technical Specifications
ProMix 2KS
10
M
Manual
X
Interface
*Order additional low pressure valves or other high pressure valve configurations as kits (see accessories).
Manual systems only include dump valves when color and catalyst change are selected.
X
A & B
Meter
X
Color
Valves
X
Catalyst
Valves
X
Applicator
Handling
M
Interface
D = EasyKey with
LCD Display
A & B Meter
0 = No Meter
1 = G3000 A & B
2 = G3000HR A & B
3 = 1/4” Coriolis A & G3000 B
4 = G3000 A & 1/4” Coriolis B
5 = 1/4” Coriolis A & G3000HR B
6 = G3000HR A & 1/4” Coriolis B
7 = 1/4” Coriolis A & 1/4” Coriolis B
Color Valves*
0 = No Valves (Single Color)
1 = 2 Colors LP
2 = 4 Colors LP
3 = 7 Colors LP
4 = 12 Colors LP
5 = 2 Colors HP
6 = 4 Colors HP
Catalyst Valves
0 = No Valves (Single Catalyst)
1 = 2 Catalysts LP
2 = 4 Catalysts LP
3 = 2 Catalysts HP
Applicator Handling
1 = 1 AFS
2 = 2 AFS
3 = 1 AFS with 1 GFB
4 = 2 AFS with 2 GFB
LP = low pressure; HP = high pressure; AFS = air flow switch; GFB = gun flush box
Manual Wall Panel
*Order additional low pressure valves or other high pressure valve configurations as kits (see accessories).
**Automatic systems with flow control include the integrated fluid regulator module.
***If an external regulator module is desired, order N = No for flow control and order control module, cable and fluid regulator separately.
*Order additional low pressure valves as kits (see accessories).
**Automatic systems with flow control include the integrated fluid regulator module.
***If an external regulator module is desired, order N = No for flow control and order control module, cable and fluid regulator separately.
A
Interface
D = EasyKey with
LCD Display
A & B Meter
0 = No Meter
1 = G3000 A & B
2 = G3000HR A & B
3 = 1/4” Coriolis A & G3000 B
4 = G3000 A & 1/4” Coriolis B
5 = 1/4” Coriolis A & G3000HR B
6 = G3000HR A & 1/4” Coriolis B
7 = 1/4” Coriolis A & 1/4” Coriolis B
Color Valves*
0 = No Valves (Single Color)
1 = 2 Colors LP
2 = 4 Colors LP
3 = 7 Colors LP
4 = 12 Colors LP
Catalyst Valves
0 = No Valves (Single Catalyst)
1 = 2 Catalysts LP
2 = 4 Catalysts LP
Flow Control**
N = No***
Y = Yes
A
Automatic
X
Interface
X
A & B
Meter
X
Color
Valves
X
Catalyst
Valves
X
Flow
Control
R
Interface
D = EasyKey with
LCD Display
A & B Meter
0 = No Meter
1 = G250 A & B
2 = G250HR A & B
Color Valves*
0 = No Valves (Single Color)
1 = 2 Colors LP
2 = 4 Colors LP
3 = 7 Colors LP
4 = 12 Colors LP
Catalyst Valves
0 = No Valves (Single Catalyst)
1 = 2 Catalysts LP
2 = 4 Catalysts LP
Flow Control**
N = No***
Y = Yes
R
Automatic
RoboMix
X
Interface
X
A & B
Meter
X
Color
Valves
X
Catalyst
Valves
X
Flow
Control
Automatic Wall Panel
Automatic RoboMix Panel
Ordering Information
ProMix 2KS
11
Meter Kits
Contains one flow meter, cable and hardware
15V804 G3000 Flow Meter
15V827 G3000HR Flow Meter
15V820 HG6000 Flow Meter
24M261 1/4" Coriolis Flow Meter
258151 3/8" Coriolis Flow Meter
16D329 S3000 (Solvent) Flow Meter
Low Pressure Color Change Kits
Contains color valves and solenoid control module.
Order dump valves separately.
256581 2 Color
256582 4 Color
256583 7 Color
256584 12 Color
256585 2 Color and 2 Catalyst
256586 4 Color and 2 Catalyst
256587 4 Color and 4 Catalyst
256588 7 Color and 2 Catalyst
256589 7 Color and 4 Catalyst
256590 12 Color and 2 Catalyst
256591 12 Color and 4 Catalyst
256592 13-18 Colors
256593 13-24 Colors
256594 13-30 Colors
256595 0 Colors and 2 Catalysts
High Pressure Color Change Kits
Contains color valves and solenoid control module.
Order dump valves separately.
256596 2 Color
256597 4 Color
256598 7 Color
256599 12 Color
256600 2 Color and 2 Catalyst
256601 4 Color and 2 Catalyst
256602 4 Color and 4 Catalyst
256603 7 Color and 2 Catalyst
256604 7 Color and 4 Catalyst
256605 12 Color and 2 Catalyst
256606 12 Color and 4 Catalyst
256607 13-18 Colors
256608 13-24 Colors
256609 13-30 Colors
256610 0 Colors and 2 Catalysts
Valve Kits
Contains valve, solenoid and hardware
15V821 Wall Panel Dump Valve
15V354 Wall Panel 3rd Flush Valve
15V822 RoboMix Panel Dump Valve
15V202 RoboMix Panel 3rd Flush Valve
15V077 Stainless Steel Needle
High pressure valve
15V737 Lubrication Cup
High and low pressure valve - supplies
lubrication to the valve needle and seal
15U932 Carbide Seat
High pressure valve
Dosing Kits
Contains fluid manifold hardware
15V034 10 cc Sequential Dosing
15V033 25 cc Sequential Dosing
15V021 50 cc Sequential Dosing
24B618 100 cc Sequential Dosing
15U955 0 cc Dynamic Dosing
RoboMix Panel Kits
Used to interface up to two air flow switches and two
gun flush boxes to a RoboMix Panel. Order air flow
switch or gun flush box kits separately.
15V267 RoboMix Panel Ratio Check Kit
15V534 Manual Gun Interface Kit
Communication Kits
15V825 Discrete I/O Integration Board Kit
Contains inputs and outputs for controlling
automatic integration and special output
functionality. Included in automatic kits.
15W023 Communication + I/O Harness Kit
Cable and terminal strip for alarm
monitoring, remote stop input and flow
control inputs. Included in automatic kits.
15V331 Ethernet IP Gateway Assembly
15V963 DeviceNet Gateway Assembly
15V964 Profibus Gateway Assembly
Network communication assembly for
automatic integration. Contains gateway
module, power supply, and enclosure.
15V337 Advanced Web Interface with Eight Port Hub
Contains web server module, power supply,
eight port hub and enclosure
15V336 Eight Port Ethernet Hub
Contains eight port hub, power supply
and enclosure
121998 25 ft CAT V Cable
121999 50 ft CAT V Cable
15V842 100 ft CAT V Cable
15V843 200 ft CAT V Cable
Cables
15V213 100 ft Power Cable
15G710 100 ft Fiber Optic Cable
15U977 40 ft Flow Control Extension Cable
15U532 3 ft CAN Cable
15V205 6 ft CAN Cable
15V206 10 ft CAN Cable
15V207 15 ft CAN Cable
15V208 25 ft CAN Cable
15U533 50 ft CAN Cable
Miscellaneous Kits
15V826 Gun Flush Box Kit
Contains guns flush box and
control hardware
570123 Gun Flush Box Wall Mount Kit
15V823 Gun Air Shutoff Kit
Used to automatically shut off gun
atomizing air during flush and fill sequences
without a gun flush box
15T632 Air Flow Switch Kit
15V350 Remote Operator Station Kit
15V256 Manual to Automatic Conversion Kit
15X247 Auto Dump Kit
Used to incorporate an auto dump feature
without a gun flush box. Contains a dump
valve, solenoid and hardware
949122 Clear Plastic Static Mixer
15V536 Solvent Flow Switch
Used to detect solvent flow during
flush sequences
15W034 Alarm Light for Manual Systems
122193 Alarm Light for Automatic Systems
15V950 Floor Stand
Contains provisions for mounting a wall
fluid panel, EasyKey display and color
change module.
197902 EasyKey Paint Shields
Includes 10 disposable clear plastic shields
to cover the EasyKey display and shield it
from paint overspray
15M483 Remote Operator Station Paint Shields
Includes 10 disposable clear plastic shields
to cover the remote operator station
display and shield it from paint overspray
15W600 Wall Panel Fluid Manifold Cover
Gun Flush Box Gun Holders
198787 Graco Pro Xs2
198405 Graco Pro Xs3, Pro Xs4
196768 Graco PRO 3500, 3500hc, 4500
15T646 Graco AirPro Air Spray
196769 Graco Delta Air Spray
196770 Graco Alpha
196771 Graco Alpha Plus, Alpha Plus RAC
15G093 Graco G15
15G346 Graco G40, G40 RAC
24N528 Graco Pro Xp60 and Pro Xp80
24N529 Graco Pro Xp40
Flow Control Parts & Accessories
249849 Flow Control module,
integrated fluid regulator
24H989 Flow Control module, external fluid
regulator (fluid regulator not included)
15U977 Cable, flow control
Required for 24H989. Included with
integrated flow control (249849) when
ordered with a ProMix 2KS system.
Accessories
ProMix 2KS
ABOUT GRACO
GRACO LOCATIONS
SALES/
DISTRIBUTION/
SERVICE
North America
Customer Service
800-328-0211
Fax 877-340-6427
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
Graco Inc. is registered to I.S. EN ISO 9001
MAILING ADDRESS
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612-623-6000
Fax: 612-623-6777
AMERICAS
MINNESOTA
Worldwide Headquarters
Graco Inc.
88 -11th Avenue N.E.
Minneapolis, MN 55413
CHINA
Graco Hong Kong Ltd.
Shanghai Representative Office
Room 118 1st Floor
No.2 Xin Yuan Building
No.509 Cao Bao Road
Shanghai, 200233
The People’s Republic of China
Tel: 86 21 649 50088
Fax: 86 21 649 50077
KOREA
Graco Korea Inc.
Shinhan Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-si, Korea 431-060
Tel: 82 31 476 9400
Fax: 82 31 476 9801
EUROPE
BELGIUM
European Headquarters
Graco N.V.
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32 89 770 700
Fax: 32 89 770 777
Call today for product information or to request a demonstration.
877-84GRACO (1-877-844-7226) or visit us at www.graco.com.
ASIA PACIFIC
AUSTRALIA
Graco Australia Pty Ltd.
Suite 17, 2 Enterprise Drive
Bundoora, Victoria 3083
Australia
Tel: 61 3 9467 8558
Fax: 61 3 9467 8559
INDIA
Graco Hong Kong Ltd.
India Liaison Office
Room 432, Augusta Point
Regus Business Centre 53
Golf Course Road
Gurgaon, Haryana
India 122001
Tel: 91 124 435 4208
Fax: 91 124 435 4001
©2013-2014 Graco Inc. 339996 Rev. D 02/14 All written and visual data contained in this document are based on the latest product information available at the time
of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and are
trademarks of their respective owners.
JAPAN
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81 45 593 7300
Fax: 81 45 593 7301
