Graco Child Car Seat With Harness System Users Manual PM 1545AB

Child Car Seat with Harness System to the manual 655e6993-3de1-4fde-89f6-2e6c5e744d2b

: Graco Graco-Child-Car-Seat-With-Harness-System-Users-Manual-235093 graco-child-car-seat-with-harness-system-users-manual-235093 graco pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

INSTALLATION - with harness system
1

Place forward-facing on vehicle seat.

2

Lift seat pad flap, thread vehicle seat belt
through openings and buckle belt (fig. a).

3

Press down firmly in center of car seat to
compress vehicle seat cushion while tightening
vehicle seat belt.
HINT: Use your knee to press down in center
of car seat (fig. b).

4

Pull front to back and left to right to check for
secure installation (fig. c).
If not secure, see “Vehicle Seat Belts” section.

5

Attach tether hook (A) to anchor hardware (B)
and tighten strap to remove any slack (fig. d).
If tether anchor hardware (B) is not available,
see “Installation of Anchor Hardware“ section.

Opening

Pull to
tighten
(A)

(B)

2

(fig. a)

(fig. b)

(fig. c)

(fig. d)

HARNESS SYSTEM - removal and re-assembly
Removal:

Re-assembly:

• Lift adjuster bar and pull both harness straps
out of current slots.

When re-assembling harness system, be sure
harness straps are not twisted.

• Pull harness strap out of car seat, harness tie,
and tongues.

1

Thread end of harness strap down through slot
in seat pad, under both clips on bottom and
back up through slot in opposite side of
car seat pad.

Store all parts for future use.

2

Thread ends through tongues or shields
(available on some models).

• Push buckle and crotch strap down into
crotch strap opening.

3
4

5

Thread ends through harness tie.

Thread ends through desired slots and adjuster
following instructions in “Operations and
Adjustments” section.

Pull buckle out of of buckle slot.

3

HARNESS SYSTEM - removal and re-assembly (continued)

3
4
2

5

1
Clip
Clip

4

HEIGHT and WEIGHT LIMITS

❃ With Harness System

❃ Outgrowing Car Seat

Child MUST meet all of the following
requirements:
• Weight is 30 - 40 lbs. (13.6 - 18.1 kg).
• Minimum height is 35 inches (89 cm) tall.
• Child is able to sit upright unassisted *.
• Child’s shoulders are not above top harness
slots.

WARNING
To avoid injuries from whiplash, top of
child’s ears must be below top edge of
headrest.

With
Harness System
40 lbs.
30 lbs.
(13.6 kg) (18.1 kg)

80 lbs.
(36.3 kg)

Without Harness System

❃ Without Harness System
Child MUST meet all of the following
requirements:
• Weight is 30 - 80 lbs. (13.6 - 36.3 kg).
• Height is 35 - 50 inches (89 - 127 cm) tall.
.
• Child is able to sit upright unassisted
• Top of child’s ears are not above top of
headrest.

*

*

The American Academy of Pediatrics recommends
that children should be at least one year of age
before being positioned forward facing.

1



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:11:26 15:23:22Z
Modify Date                     : 2004:04:08 11:21:18-04:00
Page Count                      : 4
Creation Date                   : 2002:11:26 15:23:22Z
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : FE79198
Mod Date                        : 2004:04:08 11:21:18-04:00
Metadata Date                   : 2004:04:08 11:21:18-04:00
Creator                         : FE79198
Title                           : PM-1545AB.qxd

EXIF Metadata provided by EXIF.tools