Grand Mate TX581 Remote controller User Manual
Grand Mate Co., Ltd Remote controller
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3976535 |
| Application ID | k4FBIX7MoXrjwRanpRgeAQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 107.19kB (1339929 bits) |
| Date Submitted | 2018-08-24 00:00:00 |
| Date Available | 2018-08-27 00:00:00 |
| Creation Date | 2018-08-07 17:14:39 |
| Producing Software | Microsoft® Publisher 2016 |
| Document Lastmod | 2018-08-07 17:14:39 |
| Document Title | User Manual |
| Document Creator | Microsoft® Publisher 2016 |
| Document Author: | Willance |
TX581 Remote Electronic Ignition and Control System OPERATING INSTRUCTIONS -FOR OEM USE ONLY TX581 ⚠WARNING Fire or explosion hazard. Attempted disassembly or repair of controls can cause property damage, severe injury or death. Do not disassemble the gas valve; it contains no serviceable components. Read these instructions carefully. Failure to follow them could result in a fire or explosion causing property damage, personal injury, or loss of life. The product must be installed and operated according to all local regulations. A. ● ● Do not light any appliance. Do not touch any electrical switch; do not use any phone in your building. ● ● B. C. D. If you cannot reach the gas supplier, call the fire department. Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion. Do not use this control or any gas appliance if any part has been under water or in contact with water. Immediately call a qualified service technician to replace the control system and any gas control system which has been under water or in contact with water. These instructions are to be referenced as a user guide, and do not supersede appliance manufacturer’s lighting instructions. APPLICATION TX581 is a battery-powered electronic remote ignition and control system for gas appliances with pilot burners and ODS systems. GENERAL NOTES Radio frequency Remote NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Batteries - Remote Handset: 3 x1.5V “AAA” (quality alkaline recommended) NOTE: These remote handsets, receiver, wall switches, are not interchangeable with previous versions. For all lighting/ignition instructions please refer to appliance manufacturer’s instructions. 434 MHz for Europe, US, Canada; 1/7 TX581—Operating Instructions D01 TX581 SERIES REMOTE HANDSET FEATURES TX550 TX551 Remote 434MHz Controller Unidirectional TX580 TX581 TX550 TX551 TX580 TX581 ON/ OFF ★ ★ ★ ★ Childproof ★ ★ ★ ★ Revo Home Compatible ★ ★ ★ ★ Flame Height Adjustment ★ ★ ★ ★ Standing Pilot* ★ ★ ★ ★ LCD ★ ★ ★ ★ Low Battery Indicator ★ ★ ★ ★ Second Burner ★ ★ ★ ★ Thermostat ★ ★ ★ ★ Timer ★ ★ ★ ★ Error Code Notification* ★ ★ ★ ★ Fan Speed ★ ★ ★ ★ Light Dimmer ★ ★ ★ ★ AUX ON/ OFF ★ ★ ★ ★ Fan Delay ON/ OFF ★ ★ ★ ★ Clock ★ ★ Daily Program Thermostat ★ ★ ★ 3 Independent Access Keys *Disabled for Europe 2/7 ★ TX581—Operating Instructions D01 SYMBOL Figure 1: Symbol Display SETTING TEMPERATURE UNIT Install batteries into remote handset, while ℃ or ℉ is flashing, press or to choose Fahrenheit or Celsius and vice versa. Idle 10 seconds or press firm. Idle 10 seconds or press firm. to con- to con- Press or to adjust Hour, Idle 10 seconds or press to confirm . SETTING DAY AND TIME Day setting: Press or to select a number to corresponding with the day of the week (eg. 1= Monday, 2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday, 7=Sunday). Idle 10 seconds or press firm. 12/24 Hour setting: Press or to select 12:HR or 24:HR Press or to adjust minute, Idle 10 seconds or press to confirm . to con- 3/7 TX581—Operating Instructions D01 After setting the time and temperature unit, actual temperature display on standby screen. TURN OFF THE FIRE Press button, NOTE: There is a 3 second delay before the next ignition is possible. CHILDPROOF ON: To activate press and buttons simultaneously. indicated and the handset is rendered inoperable include the off function. MODE OF OPERATION – CIRCULATION FAN To Fan mode, press flashing. button to To increase fan speed press Max fan speed is 3. ● To decrease fan speed press Min fan speed is 0. ● To setting fan delay ON or fan delay OFF mode, press and buttons simultaneously. Press to setting fan delay ON time from 0 to 12 minutes. Fan will turn on depend on this delay time after success ignition. 0 minutes will instant turn on the circulation fan. Press to setting fan delay OFF time from 0 to 12 minutes. Fan will turn off depend on this delay time after turn off the appliance. 0 minutes will instant turn off the circulation fan. Default is 12 minutes delay ON; 12 minutes delay OFF. Wiring of valve and receiver must be completed before starting ignition. Failure to do so could damage the electronics. ⚠WARNING When pilot ignition is confirmed, main flame valve turn on to maximum flame height. TURN ON THE FIRE Press and hold ond, button for 3 sec- Main burner and rear burner turn on once pilot ignition is confirmed. ● Main gas goes Max flame height first, and will goes last flame height memory. ● Handset automatically goes into Manual mode after main burner ignition. ● MODE OF OPERATION – LIGHT To Light mode, press to flashing. button To increase light dimmer press Max light dimmer is 7. ● To decrease light dimmer press Min light dimmer is 0. ● FLAME HEIGHT ADJUSTMENT To increase flame height press . Max flame height is 5. To decrease flame height press . Min flame height is 1. Default is 4/7 TX581—Operating Instructions D01 While ambient temperature equal or lower than 10℃(50℉) will appear MODE OF OPERATION – REAR BURNER To Rear Burner mode, press button to toggle ON or OFF. ON: OFF: Default is While ambient temperature equal or greater than 37℃(99℉) will appear MODE OF OPERATION – AUX To AUX mode, press toggle ON or OFF ON: OFF: button to Handset will transmit a shutdown signal to appliance. Default is MODE OF OPERATION – TIMER MODE In Timer mode, indicated. At the end of countdown time period, the fire turns off. CHANGING THE MODE OF THERMOSTAT During the appliance flame on, briefly pressing the button changes the mode of thermostat in the following order: and back to MODE OF OPERATION – PROGRAM MODE MODE OF THERMOSTAT – SET MODE In Set mode, indicated. Room temperature is measured from handset and compared to the set temperature. The flame height modulated between last setting and off to achieve the set temperature. press or to change set temperature. The default set temperature is 22℃ (72℉). Set temperature range from 7℃(45℉) to 35℃(95℉). 5/7 In program mode, indicated. Appliance thermostat according to set temperature and period between ON time and OFF time. Press and hold tings. to enter set- Briefly pressing or button to changes the mode of thermostat in the following order: TX581—Operating Instructions D01 OFF MODE AVAILABLE FUNCTIONS = Set Temp while ON = Monday to Sunday = Wednesday = Monday to Friday = Thursday = Saturday to Sunday = Monday While appliance remain off, briefly pressing the button changes the mode of operation. = Friday = Saturday = Tuesday OFF MODE – CIRCULATION FAN To Fan mode, press = Sunday Briefly pressing button to flashing In fan delay off countdown process, can press to switch off the fan. or to can check ON Temp default is 22℃(72℉). If fan is off, unable switch on, unless switch on the appliance. Press to enter ON Temp setting, pressing or to change the temperature, press or idle for 10 sec to save and exit to next setting. OFF MODE – LIGHT To Light mode, press to flashing Except , press to enter ON time and OFF time setting, to change the time, press ,then press or to change the hour, press or idle for 10 sec to enter minute setting. Press or to change the minute, press or idle for 10 sec save and exit to next setting. button To increase light dimmer press Max light dimmer is 7. ● To decrease light dimmer press Min light dimmer is 0. ● Setting follow the sequence of : ON OFF ON OFF MODE – AUX To AUX mode, press toggle ON or OFF ON: OFF: button to OFF While complete all settings, Idle for 10 sec to save and exit to program mode. Default settings: Program 1 : ON : 23:45 OFF: 23:45 Program 2 : ON : 23:45 OFF: 23:45 ● Two ON times can be programmed per day ● The ON/OFF times have to be programmed in the order ON ≤ OFF< ON ≤ OFF ● If ON = OFF or ON = OFF the timer is deactivated. ● To have the fire overnight, it can be set: and ON 0:00 OFF 23:50 SLEEP MODE While handset is idle for 1 minutes, it will turn into sleep mode. Clock will remain working, and display ambient temperature. Only one set temperature memory for Except , all buttons can awake handset from sleep mode. 6/7 TX581—Operating Instructions D01 MISCELLANEOUS Low Battery Indication Handset: Low battery indicator indicated. Battery replacement Battery replacement is recommended at the beginning of each heating season. Do not use metal tools to remove batteries. Using a metal tool could cause a short that may damage the receiver. Factory reset Remove battery, press and hold and install battery, backlight flash rapidly 3 times represent factory reset complete. Dexen Industries, Inc 9220 Norwalk Blvd Santa Fe Springs, CA 90670 Tel: +1 5626998490 7/7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 7 Language : zh-TW Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Microsoft® Publisher 2016 Creator : Willance Creator Tool : Microsoft® Publisher 2016 Create Date : 2018:08:07 17:14:39+08:00 Modify Date : 2018:08:07 17:14:39+08:00 Document ID : uuid:AB168F64-9E9A-4DF6-BC88-22FD38AB76C6 Instance ID : uuid:AB168F64-9E9A-4DF6-BC88-22FD38AB76C6 Author : WillanceEXIF Metadata provided by EXIF.tools