Grandstream Networks GXV3240 IP Multimedia Phone User Manual USERS MANUAL 2 OF 2

Grandstream Networks, Inc. IP Multimedia Phone USERS MANUAL 2 OF 2

Contents

USERS MANUAL 2 OF 2

GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 96  VIEW SMS The SMS page displays the received and sent SMS list, which are classified by contacts names or numbers as well as sorted by the time receive or send SMS. Tap on one specific SMS entry to view the interaction with the details of the contact's message, as shown in figure 92 below.    Figure 93 GXV3240 Send SMS  NEW SMS Tap on  in the toolbar on the SMS page to access SMS draft page. See figure 93. x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 97     Figure 94 GXV3240 New SMS 1. Select the account to send SMS in the drop-down menu. 2. Add contact. GXV3240 supports adding contact from the Contacts as well as directly input phone number.    Input the number in the textbox then input comma to add another contact.  Press    to select contacts or groups from the Contacts. 3. Click the textbox below to bring out the intelligent keyboard. 4. Input the message via the keyboard then touch “Send”.  MANAGE SMS DELETE SMS 1. Long press one SMS to entry the editing mode. x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 98  2. Check the SMS you would like to delete and when it turns to blue background and the icon   indicates  the  SMS has  been  selected  and  click again to  unselect the  SMS. Users could also tap on   on the upper left corner to batch select/unselect.  Select all indicates selects all SMS in the list.    Unselect all indicates unselect all SMS in the list.   3. Press    to delete the selected message. RECORDER  Users could record conference, institution and personal notes via GXV3240 Recorder conveniently.   There is no time limit to recording time and the larger the available storage capacity is, the longer the recording time is. Users could also find the recording file in the recorder and listen to it.  x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 99  Figure 95 GXV3240 Recorder NORMAL RECORDER     Figure 96 GXV3240 Normal Recorder 1. Tap on    to initiate recording. 2. Click  “Save”  to  save  the  record  file,  click  “Cancel”  will  bring  out  the  dialog  for  users  to confirm whether to save the file or not and to stop recording.            x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 100  Figure 97 GXV3240 Normal Record-Recording 3. Go back to the Recorder page, select one recording file and click    on the right of the progress bar to play the file.  CALL RECORDER In the process of an active call, the recording file will be saved on the phone. Users can only listen to it via Recorder. See figure 97 below.  Figure 98 GXV3240 Call Recordings IP LOCATION  x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 101  Based on the IP address provided, the following information will be given: Country, Region and City. See figure 98.  Figure 99 GXV3240 IP Location DIAGNOSIS  Users  could  make  operation  like  LCD  Diagnosis,  Keypad  Diagnosis,  LED  Diagnosis,  Audio Loopback and Camera Test on GXV3240 via built-in Diagnosis app. x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 102   Figure 100 GXV3240 Diagnosis FTP SERVER  GXV3240 supports file transfer via FTP server. As shown in figure 100.Users can tap on “Start FTP Server” to activate it. x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 103   Figure 101 GXV3240 FTP Server Once  enabled,  the  field  is  shown  in  figure  101.  Input  the  FTP  address  in  the  browser  on  the computer. i.e., ftp://192.168.124.136:2121/  Figure 102 GXV3240 FTP Server- Start FTP Server Before start the FTP server ,you can tap on    on the lower right corner of the page to access the settings .You can set the username and password, port number and the file directory to login the remote server. x-PDFDivision
GXV3240 User Manual TOOLS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 104   Figure 103 GXV3240 FTP Server Settings x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 105  MULTIMEDIA   GXV3240 supports rich multimedia applications, users can play music and images on the device as well as surf the Internet to view news. GALLERY  Gallery could be used to view pictures from GXV3240 internal storage. Click    in the main menu to enter gallery. x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 106   Figure 104 GXV3240 Gallery  The image folder from GXV3240 local storage will present on the Gallery page in the form of thumbnails, click the specific folder to enter image list interface.  Click    on the upper right to enable camera to take photos or videos.       Click the image folder to enter images list page, as shown in figure 104.  Figure 105 GXV3240 Gallery-Images List  Tap the slider to the left or right to flip to view all the images. x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 107   Two modes to display images: users could tap on the switch button on the upper left corner to view images via Grid or Slide.  Click the specific image to view it in full screen mode. See figure 105.     Figure 106 GXV3240 Gallery- View Image in Full Screen  Tap on the screen when the image is in full screen and click    on the lower left corner to edit the image. Users could add effect to the image as well as crop/rotate the image, ect. The second way is to click the Menu button to edit the image.  x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 108    Figure 107 GXV3240 Gallery- Edit Image  Figure 108 GXV3240 Gallery- Edit Image via Menu Options  Zoom In/ out :Users could zoom in/out the image via finger gestures.  Share: Click    on the upper right corner of the image to select one mode to send the image.  Long press one image to enter the editing mode. Users could choose one or multiple images to make operations like send, delete and rotate.  Figure 109 GXV3240 Gallery- Editing Image x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 109  BROWSER  Users could browse webpage, view news and watch video via the built-in GXV3240 Browser. Press on      in the main menu to open Browser.   Figure 110 GXV3240 Browser  Slide up and down with slide gesture to scroll the screen.  Zoom in/out the page via zoom gesture.  Press the menu button on the phone to open the menu bar for more operations. AS shown in figure 110. x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 110   Figure 111 GXV3240 Operating Browser via Menu Options  MUSIC  Users could play the audio file on the phone or from the external storage. Press    in the main menu to enable Music. x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 111             Figure 112 GXV3240 Music Interface RSS NEWS Rss News is  a  desktop widget with  which  users could view the  latest  news. When the  phone is running on idle screen, click the Menu button and select Edit Widgets in the pop-up menu, find RSS News and drag it to the blank area of the desktop.  Figure 113 GXV3240 RSS News Widget  Click the up/down arrow on the right of RSS News to flip up or down.   x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 112   Click the Refresh button on the left bottom of RSS News to refresh the news.    Click the Settings button on the right bottom of RSS News to set up News Update Interval, Page-turning Intervals, Subscribe and RSS Feeds.  Figure 114 GXV3240 RSS News Settings WEATHER FORECAST Weather Forecast is a desktop widget with which users can view real-time weather information. The way  to  add it  is when  the  phone running  on idle  screen, Click  the menu  button  and select  Edit Widgets in the pop-up menu items, find the Weather Forecast and drag it to the blank area of the desktop.   x-PDFDivision
GXV3240 User Manual MULTIMEDIA   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 113   Figure 115 GXV3240 Weather Forecast Widget  Click the Refresh button on the upper right corner to update weather data.  Click other area on the widget field to enter the detailed interface, as shown in figure 119.    Figure 116 GXV3240 Weather Forecast- Details Interface Users could set up Update, Share, Add City and other settings on the toolbar below the Weather Forecast detailed interface. x-PDFDivision
GXV3240 User Manual GS MARKET   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 114  GS MARKET  GXV3240 provides direct  access  to  apps  via  built-in GS Market app. Users could  download  the apps from the market and install to local. VIEW APP’S DETAILS Click   in the main menu to access GS Market.  Figure 117 GXV3240 GS Market x-PDFDivision
GXV3240 User Manual GS MARKET   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 115  Click the app icon to view details and users evaluation. SEARCH APPS Users  could  view the  apps  by  category,  or  tap  on    to  bring  out  the  textbox  and  input the keyword of the app to search. DOWNLOAD AND INSTALL APPS  Click    below the app to download and install it. The icon   will be shown below the downloaded app, click the icon to open the corresponding app.    Tap on    on the upper right of the page to view the download apps and installed apps. As shown in figure 117.  Figure 118 GXV3240 GS Market-Download x-PDFDivision
GXV3240 User Manual GS MARKET   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 116   The installing process will be automatically started after downloaded the app. Users could tap  on Installed  tab  to  view  the  installed  apps,  or  uninstall  the  downloaded  apps  on  this page. UPDATE APPS The GXV3240 will  automatically detect if there is  new  version available for the installed  apps to upgrade when the network connection is normal. User can view the relevant information and update apps on the Installed page, as shown in figure 118 below.  Figure 119 GXV3240 GS Market - Installedx-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 117  CONNECTING TO NETWORKS AND DEVICES NETWORK Network connection has a variety of ways, one is wired connection via the cables, and the other way is to connect via Wi-Fi.   ENABLE ETHERNET Follow the steps below to turn on Ethernet:   1. Insert the cable into the LAN port behind the phone then go to Settings and click Network to enter Network Settings. 2. Click Ethernet Settings and choose IPv4 or IPv6 to enter Settings. 3. Set the address type to static IP then set up the IP address and subnet mask.    x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 118  DHCP If there are no requirements for network, users could select DHCP to reduce the risk of network disconnection. The steps 1 and 2 to obtain DHCP are the same as the steps in Ethernet Settings. Step 3 is to select DHCP.  ENABLE PPPoE If the network is ADSL, users can connect to the network by means of dial-up. The steps 1 and 2 to enable PPPoE can be set following the steps above in Turn on Ethernet. Step 3 is to choose PPPoE to enter the corresponding Settings page and input the relevant account ID and password. WI-FI Please make sure that Wi-Fi has been turned on if users choose to use it for network connection. ENABLE WI-FI There are two ways to enable Wi-Fi:  Go to Settings and tap on Network to enter Wireless& Network Settings page, tap on the Wi-Fi switch button to enable it.    Click  to enable Wi-Fi in the drop-down status bar. The phone will automatically connect to the available Wi-Fi once enabled, users need to go to Wi-Fi Settings page to enter the password if the Wi-Fi requires password to login.   x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 119  SEARCH AND ADD WI-FI The phone will automatically search the available WI-Fi Within the effective range once enabled. Tap on the SSID and input the right password in the pop-up dialog, click Connect to connect to the selected Wi-Fi.    Figure 120 GXV3240 Wi-Fi Connection BLUETOOTH Users could use the Bluetooth to transfer files as well as make calls and listen to the music.   ENABLE BLUETOOTH There are two ways to enable Bluetooth:  Go to Settings and click Network to enter Wireless& Network Settings page. Click the switch to enable the Bluetooth. x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 120   Click  to enable the Bluetooth in the drop-down status bar.   Users need to pair the Bluetooth after enabled it then put it into use.  BLUETOOTH SETTINGS Users could set up whether all the discovered Bluetooth in range will show or not on the Bluetooth Settings page once enabled the Bluetooth, the available detection duration is 2 minutes.  Figure 121 GXV3240 Bluetooth Settings  SEARCH AND PAIR BLUETOOTH On the Bluetooth Settings page will display the IDs of all paired and available devices. If the device you would like to pair with does not show  up  in  the list, you can manually search the Bluetooth devices nearby. Follow the steps below to search and pair the Bluetooth: 1. Tap on the Menu button and select Search Device in the pop-up menu. x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 121   Figure 122 GXV3240 Search Bluetooth 2. Search for the device you want to pair in the Available Devices. 3. Tap on the device ID on GXV3240, The pop-up dialog is shown in figure 122:  Figure 123 GXV3240 Pair Bluetooth 4. Tap on the Pair button to pair Bluetooth. This is a two-way operation, namely the Bluetooth that being requested to pair should accept the pairing request. Users could find the device ID in the Paired Devices after pairing successfully. x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 122  CONNECTING TO A BLUETOOTH DEVICE Users could find the pairing Bluetooth in the Paired Devices. Tap on it to connect. The connected device will display the corresponding status. Tap on    to unpair Bluetooth as well as rename and configure it.  Figure 124 GXV3240 Bluetooth Device Settings  SEND FILES VIA BLUETOOTH Users  could  transmit  file  and  Contacts  data  via  Bluetooth  when  the  Bluetooth  is  connected successfully. Select one target device and click “Send” to transmit file. See figure 124. x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 123   Figure 125 GXV3240 Send File via Bluetooth The GXV3240 will display the following page as shown in figure 129 when receiving a request to transmit file. Click “Yes” to download the file under directory SD Card/Bluetooth.  Figure 126 GXV3240 Transmit File via Bluetooth  USE BLUETOOTH HEADSET FOR CALLS 。 Users  could  switch  voice  channel  in  the  process  of  calls  once  Bluetooth  headset  is  connected successfully. Refer to the chapter Via Bluetooth for details. EHS HEADSET Insert headset connector to into the LINE port on the back of GXV3240, a headset icon will show on the status bar as shown in figure 129. The EHS headset will ring synchronously when there is an x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 124  incoming call. Refer to the EHS Headset Manual for detailed operations. Refer to the chapter Via EHS Headset to learn how to switch EHS headset voice channel. Click on http://www.grandstream.cn/Wenti_view.aspx?Id=110 to view headset compatibility. EXTERNAL USB DEVICE Insert the USB device to the USB port on the right side of the GXV3240, a USB device icon will show on the status bar. Users could also open the File Manager to view external USB drive status and the files stored in it. See figure 126.  Figure 127 GXV3240 External USB Drive Status x-PDFDivision
GXV3240 User Manual CONNECTING TO NETWORKS AND DEVICES   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 125  EXTERNAL SD CARD Insert the SD card to the SD port on the right side of the GXV3240, a SD card icon will show on the status bar. Users could also open the File Manager to view the external SD card status and the files stored in it. See figure 127.  Figure 128 GXV3240 External SD Card Status x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 126  GXV3240 LCD SETTINGS The  GXV3240  LCD  MENU  provides  easy  access  to  the  settings  on  the  phone  that making it more convenient to  accommodate  users’ habits.  There  are  two  ways  to  Follow  open Settings:  Click      in the main menu.   Press the Menu button    when the phone is running on idle and select “System Settings” in the pop-up menu. The Settings page is shown in figure 128.    Figure 129 GXV3240 System Settings x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 127  PERSONALIZED ACCOUNT Personalized Account allows users to  set up varied ring tone and personalized features to each account. Go to Personalized Account page, tap on one account to set. The account will show up with registration status on the right side of the Personalized Account menu.  Ringtone:  Select  ringtone  for  the  incoming  call.  If  choose  Custom Ringtone,  users  could select  the  custom  ringtone  in  the  File  Manager.  Users  could  view  the  name  of  selected music files in the Ringtone Settings on LCD as well as Web GUI.  Auto-Answer: Select whether to answer automatically for the incoming call. If set to “Always”, the phone will enable the speaker automatically to answer the incoming call after it rings for the  first  time.  If  set  to  Enable  Intercom/Paging  or  Select  “Broadcast” in  Feature  Key Synchronization option in the Call Settings, it will answer the call based on SIP header info sent from the server/proxy.  Shared Call Appearance (SCA): Select the shared-call-appearance (SCA) of the account, including whether to enable the shared account, whether to enable Barge-in, and whether to auto fill in the CallPark service code, set up CallPark service code and Seize Line timeout.  Call Forwarding: Select the call forwarding features for the account.  x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 128  WIRELESS & NETWORK Users could configure network connection features via Wireless & Network.    Ethernet settings: Set up a series of network parameters like DHCP.  Wi-Fi:  Check/uncheck  to  turn  on/off  Wi-Fi.  The GXV3240  would  automatically  scan  the available Wi-Fi and connect to it once enabled Wi-Fi.  Wi-Fi settings: Set up and manage W-Fi access point.  Bluetooth: Check/uncheck to turn on/off Bluetooth to connect the phone with other Bluetooth devices once enabled Bluetooth.  Bluetooth settings: Set up relative parameters connecting to other devices via Bluetooth.  VPN: Manage VPN.  OpenVPN: Add new VPN configuration files  Proxy settings: Set up proxy server.  Additional Network Settings: Set up Qos and 802.1x mode.  Tethering and portable hotspot: Set up portable Wi-Fi hotspot. SOUND   Users could configure the GXV3240 ringtone, plays music and video and speak volume via Sound.  Silent  Mode:  Check/uncheck  to  enable/disable  silent  mode.  In  the  Silent  mode,  all applications will be set to mute other than alarm and media.  Volumes: Tap on Volumes and scroll the slider to left/right to adjust the volume for Ringtone , Media and Alarm;    Ringtone. Select phone's default ringtone for incoming call;   x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 129   Notification tone: Select notification tone for applications like SMS. DISPLAY Use Display to configure the screen display parameters like brightness and screen saver. Brightness:  Tap  on  Brightness  and  scroll  the  slider  to  left/right  to  adjust  the  brightness  on  the GXV3240 LCD; Screen timeout: Tap to set the timeout interval before the LCD turns dark form idle screen. Screen Saver: Set the parameters like screen saver images and interval. Landscape screen: Set all screens landscaped. STORAGE Check the internal storage of the phone. APPLICATIONS Use the Applications to view the running details about the applications installed on the GXV3240, to manage applications and set permission for the installations. Slide left/right to view the download application and the size as well as running status of all applications on the phone and in the SD card, or manage the running applications. x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 130  LOCATION ACCESS Set whether to let app to use Google location service to collect location data. SECURITY SETTINGS Set up the security parameters on the phone.  Screen lock. Set up pattern or password for screen lock. Please set up the pattern with the Wizard.  Owner info. Display owner info on the lock screen.   Display password. The screen will display the input value when users input the password if check the option. Uncheck not to display the input value when input the password;   Device administrators. Add or delete device administrators.  Unknown sources. Check/uncheck to enable/disable permission to install applications that you obtained from web sites, email, or other locations other than GS Market;   Note:   It is recommended to download Apps from the GS market for the security of user’s data.  Verify apps. Disallow or warn before apps installation that may cause harm.  Trusted credentials. Display trusted certificates or other certificates.  Install from SD card. Install encrypted certificate from SD card.  Clear credentials. Remove all certificates and reset the password.  x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 131  LANGUAGE &KEYBOARD  Language. Tap to open a list of language options.  Spell checker. Configure whether to check spellings and select the available spell-checker tool.  Personal dictionary. Add words to user dictionary.  Keyboard & input methods. Set up the default input method.  Android keyboard(AOSP). Set up whether to use Android keyboard and configure Android keyboard.  Text-to-speech (TTS) output:    Set up TTS.  Moue/trackpad. Set up the point speed. ACCOUNTS Accounts allows users to add Google account, Exchange account and email account. Users could also make sync settings via Google Play account or associated account on GXV3240. The steps to add account can be set following the steps in chapter Manage Contacts. The account can be synchronized with the following procedures once being added successfully:  Google Play. Download Google Play from GS market, open it after the download. Google Play will automatically login with the added Google account.   x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 132   Figure 130 GXV3240 Google Play-Add Account    Contacts. The contact synchronizes with Google account will show in the Contacts. Refer to the chapter Manage Contacts-Account for details. DATE &TIME  Enable and Use Specified NTP Server Address. Set the specified NTP server URL or IP address.    Set date. Set the date on GXV3240 manually if not set auto sync.   Set time. Set the time on GXV3240 manually if not set auto sync.   Select time zone. Set the time zone on GXV3240.   Use 24-hour format. Check/uncheck to display the time using 24-hour time format or not.   Choose date format. Select the Month/Day/Year format. ABOUT PHONE About Phone displays the GXV3240's Account Status, Network Status and System Info. x-PDFDivision
GXV3240 User Manual GXV3240 LCD SETTINGS   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 133   Account status. Displays the account name and registration status on the GXV3240.   Network status. Displays MAC Address, IP Address info, ect.   System Info. Displays the system version of the GXV3240.  ADVANCED SETTINGS Users could open Advanced Settings to configure Account Advanced Settings, Upgrade, Syslog& Factory Reset.  Account. Tap on  “Account” and select one account to input the  necessary information to register the  account,  which  includes Account Activation, Account  Name, SIP  Server,  ect. Save the settings to fulfill registration.  Upgrade. Input the software info to upgrade via firmware server.  Syslog. Select the syslog level and Syslog Server Address.  Factory Reset. Restore the GXV3240 to factory default settings.   Developer mode. Adjust the phone via ADB tool.     REBOOT Reboot your phone. x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 134  GXV3240 WEB GUI DEFINITIONS This chapter introduces the GXV3240 Web GUI. As mentioned, you can log in as an administrator or a user.  Status: Displays the Account Status, Network Status, and System Info of the phone;    Account  (1-6):  To  configure  each  of  the  SIP  accounts.  Including  General  Info,  Network Settings, SIP Settings, Encoding Settings, Call Settings.    Advanced Settings: General Settings, Call features, Video, Audio, MPK General Settings, MPK Settings;    Maintenance: Network Settings, Time Settings, Web/SSH Access, Upgrade, Syslog, Logcat, Debug, Language, Webmaster, Contacts, LDAP and Device Manager.      x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 135  ACCESSING GXV3240 WEB GUI IP ADDRESS Users could view the GXV3240 IP Address via Account widget on the screen as shown in figure 130.  Figure 131 GXV3240 Desktop Widget-Account TO ACCESS THE GXV3240 WEB GUI 1. Connect the computer to the same network as the phone;   2. Open a Web browser on your computer, enter the phone’s IP address in the address bar of the browser; for example: http://192.168.124.111;           x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 136   Figure 132 GXV3240 Web GUI-Login 3. Press the “Enter” button and input the administrator’s login and password in the prompt box. The default login name for the administrator is "admin". The default administrator password is set to "admin".   4. Select the  language being used  on  Web  page in  the  drop-down menu  of  the  language  bar. Chinese and English are optional.   5. Click “Login” to access the Web GUI.   SAVE CHANGES When changing any settings, always SUBMIT them by pressing    on the bottom of each x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 137  page or press the “Enter” Button, the Web browser will prompt to indicate having saved successfully. For those options with    next to them, users must reboot the phone for the changes to take effect. CONFIGURE WEB PAGE   GXV3240 WEB page includes Status, Account, Advanced Settings and Maintenance. Users could login the phone with varied username and the corresponding access permissions are DIFFERENT. See table 8. Table 8 Users Access Permissions User Type Username Password Access Permissions End-user user Custom Status,  some  basic  settings  in  the Advanced Settings and Maintenance  Administrator Administrator admin admin All Pages TOOLBAR The toolbar is on the upper right corner of the WEB page. As shown in figure 132.  Figure 133 GXV3240 Web GUI-Toolbar   Select the page color x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 138   Select the language.    Reboot the phone.  Logout. STATUS   GXV3240 Status page includes Account Status. Network Status and System Info. Users could click the corresponding option on the left navigation bar to enter each subpage. See figure 133.  Figure 134 GXV3240 Web GUI Status-Account Status   Table 9 Status/Account Status Parameters Parameters Description x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 139  Account   All the 6 SIP accounts on the phone.   Number   The number or extension corresponds to each account. SIP Server The SIP server the account registers with   Status   Two registration status for the SIP account: Registered and Unregistered.               Figure 135 GXV3240 Web GUI Status-Network Status Table 10 Status/Network Status Parameters Parameters Description MAC Address  GXV3240 MAC address. Address Type  The configured address type: DHCP, Static IP or PPPoE.  IP Address  IP address of the phone.  Subnet Mask  Subnet mask of the phone.  Default Gateway  Default gateway of the phone.  DNS Server  DNS Server of the phone.  NAT Type  The type of NAT connection used by the phone.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 140   Figure 136 GXV3240 Web GUI Status-System Info  Table 11 Status/System Info Parameters Parameters Description Product Model   Product model of the phone.  Hardware Revision   Hardware version number.   Part Number   Product part number.   System Version   Firmware version. This is the main software release version.   Recovery Version   Recovery image version.   Boot Version   Booting code version.   Kernel Version   Kernel version.   Android Version   Android OS version.   System Up Time  System up time since the last reboot.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 141  ACCOUNT   Users could configure each account on Account page.GXV3240 has six independent SIP accounts that can be configured on an individual configuration page. Users could select Account X in the menu bar on WEB GUI to enter the corresponding account configuration page. See figure 136. The account page has five parts as General Settings, Network Settings, SIP Settings, Codec Settings and Call Settings. User could click the corresponding option on the navigation bar on the left to configure the subpage respectively.    Figure 137 GXV3240 Web GUI Account -General Settings  Table 12 Account/General Settings Parameters Parameters Descriptions x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 142  Account Active   This field  indicates  whether  to  activate the  account.  The phone  will not send login message to the SIP server if uncheck this option.   Account Name   The name associated with each account to be displayed on the LCD.   SIP Server   The  URL  or  IP  address  of  the  SIP  server.  This  is  provided  by  your  VoIP  service provider (ITSP).   SIP User ID   User account information, provided by your VoIP service provider (ITSP). It's usually in the form of digits similar to phone number or actually a phone number.   SIP  Authentication ID   SIP service subscriber's Authenticate ID used for authentication. It can be identical to or different from the SIP User ID.   SIP  Authentication Password   The  account  password  required  for  the phone  to  authenticate  with  the  ITSP  (SIP) server before the account can be registered.   Voice Mail UserID    This  parameter  allows  you  to  access  voice  messages  by  pressing  the  MESSAGE button or Dial the Access Number button on the phone.  Name    The SIP server subscriber's name (this function should be supported by SIP server) that will be used for Caller ID display. Tel URI    The default is “Disabled”. If the phone has an assigned PSTN telephone number, this field should be  set to  "Enabled",  or  should be  set to  “Disabled”. If set  to "Enable", Then  a  "User=Phone"  parameter  will  be  attached  to  the  Request-Line  and  "TO" header in the SIP request.         x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 143   Figure 138 GXV3240 Web GUI Account-Network Settings Table 13 Account/Network Settings Parameters Parameters Description Outbound Proxy  IP  address  or  URL  of  the  Outbound  Proxy,  Media  Gateway,  or  Session  Border Controller. It's used by the phone for Firewall or NAT penetration in different network environments.  If  a  symmetric  NAT  is  detected,  STUN  will  not  work  and  ONLY  an Outbound Proxy can provide a solution.   Secondary Outbound Proxy   IP address or URL of the Secondary Outbound Proxy.  DNS Mode   This  parameter  controls  how  the  Search  Appliance  looks  up  IP  addresses  for hostnames.  There  are  three  modes:  A  Record,  SRV,  NATPTR/SRV.  The  default setting is "A Record". If the user wishes to locate the server by DNS SRV, the user may select "SRV" or "NATPTR/SRV".  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 144  NAT Traversal  This parameter configures whether the NAT traversal mechanism is activated.   If set to "STUN" and STUN server is configured, the phone will route according to the STUN server. If NAT type is Full Cone, Restricted Cone or Port-Restricted Cone, the phone  will  try  to  use  public  IP  addresses  and  port  number  in  all  the  SIP&SDP messages.   The phone will send empty SDP packet to  the  SIP  server  periodically  to keep the NAT port open if it is configured to be "Keep-alive". Configure this to be “NO" if an outbound proxy is used. "STUN" cannot be used if the detected NAT is symmetric NAT.   Set this to "VPN" if OpenVPN is used.  Proxy-Require    A SIP Extension to notify the SIP server that the phone is behind a NAT/Firewall.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 145   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 146  Figure 139 GXV3240 Web GUI Account-SIP Settings Table 14 Account/SIP Settings Parameters Parameters Description SIP Registration  The default setting is "Yes”. Selects whether or not the phone will send SIP Register messages to  the proxy/server.  If set  to "No”,  the phone  will not send  SIP Register messages to the proxy/server. Unregister  Before New Registration   If set to "Yes", the SIP user's registration information will be cleared when the phone reboots.  The SIP Contact  header will contain "*" to  notify  the  server to unbind the connection. The default setting is "No".   Register Expiration (m)  Specifies the frequency (in minutes) in which the phone refreshes its registration with the specified registrar. The default value is 60 minutes (1 hour). The maximum value is 64800 minutes (about 45 days). The minimum value is 1 minute. Wait  Time  Retry Registration (s)  The default value is 20 seconds. The amount of time in which the phone will retry the registration process in the event that is failed.   Local SIP Port  Defines the local SIP port used to listen and transmit.  SUBSCRIBE  for MWI  The default setting is "No". When set to "Yes", a SUBSCRIBE for Message Waiting Indication will be sent periodically.  Session  Expiration (s)  Session Expiration is  the time (in  seconds)  where the session  is considered timed out,  provided  no  successful  session  refresh  transaction  occurs  beforehand.  The default value is 180 seconds.   The  SIP  Session  Timer  extension  that  enables  SIP  sessions  to  be  periodically "refreshed" via a SIP request (UPDATE, or re-INVITE). If there is no refresh via an UPDATE  or  re-INVITE  message,  the  session  will  be  terminated  once  the  session interval expires.   Min-SE (s)  The minimum session expiration (in seconds). The default value is 90 seconds.  UAC  Specify Refresher  As a Caller, select UAC to use the phone as the refresher; or select UAS to use the Callee or proxy server as the refresher.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 147  UAS  Specify Refresher  As a Callee, select UAC(User Agent Client)  to use caller or proxy server as the refresher; or select UAS  (User Agent Server)to use the phone as the refresher.  Force INVITE  The  Session  Timer  can  be  refreshed  using  the  INVITE  method  or  the  UPDATE method. Select "Yes" to use the INVITE method to refresh the session timer.  Caller  Request Timer  If set  to "Yes" and  the remote party supports session timers, the  phone will use a session timer when it makes outbound calls.  Callee  Request Timer  If set  to "Yes" and  the remote party supports session timers, the  phone will use a session timer when it receives inbound calls. Force Timer  If Force Timer is set to "Yes", the phone will use the session timer even if the remote party does not support this feature. If Force Timer is set to "No", the phone will enable the session timer only when the remote party supports this feature.   To turn  off  the  session  timer, set  caller  Request  Timer,  callee  Request Timer  and Force Timer all to "No".   Enable 100rel  The use of the PRACK (Provisional Acknowledgment) method enables reliability to SIP  provisional  responses  (1xx  series).  This  is  very  important  in  order  to  support PSTN  internetworking.  To  invoke  a  reliable  provisional response, the  100rel tag is appended to the value of the required header of the initial signaling messages.  Use  Privacy Header Defines whether or not the Privacy header will be in the SIP INVITE message. The default setting is “default”. Use P-Preferred-Identity Header Defines  whether  or  not  the  P-Preferred-Identity  header  will  be  in  the  SIP  INVITE message. The default setting is “default”. SIP Transport  Determines the network protocol used for the SIP transport. Users can choose from UDP / TCP /TLS. The default setting is “UDP”. Symmetric RTP  Defines whether symmetric RTP is supported or not.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 148  Support  SIP Instance ID  Defines whether SIP Instance ID is supported or not. The default setting is "Yes".   Validate  Incoming SIP Messages  Defines whether the incoming SIP messages will be validated or not.   Validate  Incoming INVITE Session   If  set  to  "Yes",  the  phone  will  response  to  SIP  401  Unauthorized  to  validate  the incoming INVITE message. The default setting is "No". SIP T1 Timeout  The default  setting  is  0.5  seconds.  SIP  T1 Timeout  is the RTT  (Round-Trip  Time) evaluation between the server and client. If the wait time is long, please  choose a larger value in order to guarantee the stability. SIP T2 interval  The default setting is 4 seconds. This option configures the SIP Protocol T2 Timer (In Seconds).  T2  Timer  determines  the  time  interval  of  INVITE  Response  and non-INVITE Request. Remove OBP from route  The default setting is "No". This is used for the SIP Extension to notify the SIP server that the device is behind a NAT/Firewall. Enable SCA If set  to”Yes”, SCA (Broadsoft  standard)  will be used as the  register  account.  The default setting is "No". Enable BargeIn If  set  to”Yes”,  users  could  barge  the  current  call  on  the  shared  line.  The  default setting is "No". Auto-filling  Pickup Feature Code If set to” Yes”, call park will be automatically filled in. The default setting is "No". Pickup  Feature Code Configure pickup service code for call park. Line-seize Timeout Configure the timeout (in seconds).The default setting is "15 seconds".  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 149   Figure 140 GXV3240 Web GUI Account- Codec Settings Table 15 Account/Codec Settings Parameters Parameters Description DTMF This  parameter  specifies  the  mechanism  to  transmit  DTMF  digits.  There  are  3 supported modes:   In audio: DTMF is combined in the audio signal (not very reliable with low-bit-rate codecs),   Via RTP (RFC2833). DTMF signal with identified RTP packets, it can be learnt that the package in the RTP packet header is DTMF packet and the type of DTMF signal. Via SIP INFO. Use INFO message of SIP signaling to carry DTMF signal. The main deficiency  is  DTMF  signal  and  media  package  may  not  synchronized  due  to  the separate transition of SIP control signaling and Real Time Protocol (RTP). The default is RFC2833. x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 150  DTMF  Payload Type  Species the DTMF payload type using RFC2833. The default is 101. Preferred Vocoder  5  different  vocoder  types  are  supported  on  the  phone,  including  PCMA,  PCMU, G.722, G.726-32, iLBC.   Users  can  configure  vocoders  in  a  preference  list  that  is  included  with  the  same preference order in SDP message.   iLBC Frame Size 20 ms or 30 ms is optional. Support RFC5168 If set to “Yes”, the video call would support RFC5168. The default setting is "No". H.264 Image Size Supports 720P、4CIF、VGA  、CIF、  QVGA、  QCIF. H.264 Profile Type  There are 4 options available: Baseline Profile, Main Profile, High Profile, BP/MP/HP. Video Bite Rate Configure the bite rate for video call. The default setting is "2048kbps ". SDP Bandwidth Attribute Standard, Media Level, Session Level, No H.264  Payload Type  Input H.264Payload value. The range is 96-127. The default setting is 99. SRTP The  default  setting  is  "Disable".  Users  could  choose  force  SRTP  execution  or execute SRTP with negotiation mode. Silence suppression Controls the Silence suppression/ Voice activity detection(VAD).If set to “Yes”, the phone will send a small quantity of VDA packets other than the voice packets when no voice stream detected during a call. The default setting is "No".  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 151  Voice  Frames  Per TX  Configures the number of voice frames transmitted per packet.( The maximum value of  IS  limit  that  based  on  Ethernet  packets  is  recommended  to  be  1500  bytes  or 120Kbit/s) When  configuring  this,  it  should  be  noted  that  the  "ptime"  value  for  the  SDP  will change with different configurations here. This value is related to the codec used and the actual frames transmitted during the in payload call.   i.e., If set the first code to G. 723 and “voice frame/TX" to 2, for the reason G. 723 voice frame includes 30 milliseconds of audio,    the "ptime" value is 60 milliseconds in the SDP packet of INVITE request. Similarly if set the first code to G. 729/ G. 711/ G. 726 and “voice frame/TX" to 2, then the "ptime" value is 20 milliseconds. If the "Speech frame/TX”  exceeds  its the  maximum value,  the  phone  will save the maximum value to correspond with the choice of the first coding. PCM maximum value: 10 frame (x10 milliseconds) ; G.726 maximum value: 20 frame (x10 milliseconds) ; G.723 maximum value: 32 frame (x10 milliseconds) ; G.729 maximum value: 64 frame (x10 milliseconds) ; Adjust the above parameters will  also change the dynamic jitter  buffer.  The phone has a dynamic jitter buffer processing algorithm. The jitter buffer scope is 20 to 200 milliseconds. For end users, it is recommended to use the default setting, as incorrect settings may influence the audio quality.   Jitter Buffer Type  Selects either Fixed or Adaptive based on network conditions. The default setting is "Adaptive".   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 152   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 153  Figure 141 GXV3240 Web GUI Account – Call Settings Table 16 Account/Call Settings Parameters Parameters Description Start  Video Automatically  Press the Conference button will automatically connect the active line to the conference. Remote  Video Request Configure video request type. Three options are available: Prompt, Accept, deny. The default setting is “Prompt”. Dial Plan Prefix Set dial prefix. Any numbers dialed with this account will automatically add this prefix   Dial Plan Dial Plan Rules: 1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #; 2. Grammar: x - any digit from 0-9; xx - at least 2 digit numbers from 0-9; ^ - exclude  [3-5] - any digit of 3, 4, or 5 [147] - any digit of 1, 4, or 7 <2=011> -when the digit is 2, it will be replaced with 011 Set to {x+} allows dial out with all digits. 3. Example: {[369]11 | 1617xxxxxxx} –- allows dialing numbers 311, 611 and 911 and 1617 area code {^1900x+ | <=1617>xxxxxxx} –prevents dialing any number started with 1900 and 1617 area code will be added automatically when dialing number with 7 digits length; Refer-To  Use Target Contact  The default setting is "No". If set to "Yes" and the server support this function, the phone will use the "Refer-To" header for attended transfer.   Auto Answer  The default setting is "No". If set to "Yes", the phone will automatically turn on the speaker phone to answer incoming calls.  Send Anonymous  If  set  to  "Yes",  the  "From"  header  in  outgoing  INVITE  messages  will  be  set  to anonymous, essentially blocking the Caller ID to be displayed. Anonymous  Call Rejection  The default setting is "No”. If set to "Yes", anonymous calls will be rejected.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 154  Call Log  Three options. The default is “log all calls”.  log all calls: Log all calls;  Only log incoming/outgoing calls: Disable Missed calls record.    Disable call log: Disable call record. Special Feature  The default setting is "Standard". Users may need to select special features to meet the specific requirements of different soft switch vendors.   Feature  Key Synchronization  Call features can be synchronized with SIP server. Enable  Call Features The  default  settings  is  "no".  The  local  supports  call  transfer,  call  waiting  and  call forwarding. i.e.: * 72 + number means sets unconditional transfer number via call function.   When the local call function conflicts with the server, local call function can be shut down.   Please refer to chapter Activate Call Features for more details.  No  Key  Entry Timeout (s)  Defines  the  timeout  (in  seconds)  for  no  key  entry.  If  no  key  is  pressed  after  the timeout, the digits will be sent out. The default value is 4 seconds.  Ring Timeout (s) Defines the timeout (in seconds) for the rings on no answer. The default setting is 60 seconds.  Use # as Dial Key   Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#" key will immediately dial out the input digits. In this case, this key is essentially equivalent to the "Send" key. If set to "No", the "#" key is included as part of the dialing string.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 155   3-Party Conference  host transfer the call Defines whether the call will be transferred once the conference host hangs up the phone. If check, the other two parties will still on line if the host hangs up.The default is uncheck.   Conference URI Configure Conference URI(Broadsoft Standard)according to N-way conference Broadsoft  Call Center Enable Broadsoft Call Center. The default setting is “No”. Hoteling Event Enable Broadsoft event function. The default setting is “No”. Enable Broadsoft Call Center to make this take into effect. Call Center Status Enable Broadsoft  Call Center Status.  The default setting is “No”. Enable Broadsoft Call Center to make this take into effect. Account Ring Tone  Allows users to configure different ringtone for the account.  One System Ring Tone:Once selected, all calls will ring the System Ring Tone.  Multiple Customer  Ring  Tone:Once  selected,  all  calls  corresponds  to  the specified account will ring the Customer Ring Tone. Users could also upload the mp3 files as the ringtones. Call Forward  Set Call Forward function.  Call Forward Type  Specifies the Call Forward Type in the drop-down menu:    None: Disable Call Forward    Unconditional: Forward all calls to particular number    Time based: Forward calls based on the time range.    Others: when phone is busy or not answered.   Match  Incoming Caller ID This option defines the corresponding incoming ringtone. Users can choose different ringtones. Custom Ringtone This option defines the corresponding incoming ringtone. Users can choose different ringtones.   ADVANCED SETTINGS   Users  could  set  Security,  Call  Features,  and  Audio  on  the  Advanced  Settings  page.  Select Advanced Settings in the menu bar on WEB GUI. See figure 146. x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 156  The account page has six parts as General Settings, Call Features, Video settings, Tone Generator, MPK  General  Settings,  MPK  LCD  Settings.  User  could  click  the  corresponding  option  on  the navigation bar on the left to configure respectively.    Figure 142 GXV3240 Web GUI-Advanced Settings Table 17 Advanced Settings/General Settings Parameters Parameters Description x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 157  Local RTP Port  Defines the local RTP-RTCP port pair used to listen and transmit. It is the base RTP port for channel 0.   Users should configure 2 ports for one RTPdialogue: one for RTP and the other for RTCP. When configured, channel 0 will use this port_value for RTP and the port_value+1 for its RTCP; channel 1 will use port_value+2 for RTP and port_value+4 for RTCP. The default value is 5004. Use Random Port  When set to "Yes", this parameter will force random generation of both the local SIP and RTP ports. This is usually necessary when multiple phones are behind the same full cone NAT. The Default setting is "Yes".  Disable  in-call DTMF display  Disable in-call DTMF. Keep-alive  Interval (s)  Specifies how often the phone sends a blank UDP packet to the SIP server in order to keep the port on the NAT router to open. The default setting is 20 seconds.  STUN Server  The IP address or Domain name of the STUN server to solve NAT Traversal.  Use NAT IP  The NAT IP address  used in SIP/SDP messages. This field is blank at the default settings.    SIP TLS Certificate   GXV3240 supports SIP over TLS via the built-in private key and SSL certificate. The custom SSL certificate used for SIP over TLS should be in X.509 format.  SIP  TLS  Private Key  Users could custom SSL private key. The custom SSL Private key used for SIP over TLS should be in X.509 format.    SIP  TLS  Private Key Password  Defines the SSL Private key password used for SIP over TLS.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 158   Figure 143 GXV3240 Web GUI Advanced Settings-Call Features Table 18 Advanced Settings/Call Features Parameters Parameters   Description Always  Ring speaker If set to “Yes”, the incoming call will ring through speakers when using headphones. The default is "No". Auto Conference   If set to “Yes”, when during an active or more calls, users could press the Conference icon to join all the current lines on the phone. The default setting is "No".  Disable Call-Waiting   The default setting is "No". If set to “Yes”, disables the call waiting on the third party when two table telephone set up calls. Disable Dialplan If set to "Yes", disables dialing plans. The default setting is "No". Disable Call-Waiting Tone   The  default  setting  is  "No".  If  set to  "Yes”,  disable  the  call  waiting  tone  when  call waiting is on.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 159  Disable  DND Reminder Ring   The default setting is "No". If set to "Yes", the ring splash that indicates an incoming call when DND is enabled will not be played.    Disable  IP-Call mode   The default setting is "No". If set to "Yes", the phone cannot make IP calls via IP-Call mode. Use  Quick  IP-Call mode    Users can dial an IP address under the same LAN/VPN segment by entering the last octet  in  the  IP  address.It  is  recommended  that  enable  this  mode  when  using  the restricted static IP. Go to Settings>Advanced Settings page, set “Fast IP Dial Mode”to “Yes”, dial #XXX (X is 0-9 and XXX <=255), phone will make direct IP call to aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the local IP address REGARDLESS of subnet mask.  Disable Conference   The default setting is "No". If set to "Yes", the Conference function will be disabled.   Disable Transfer    The default setting is "No". If set to "Yes", the  “TRANSFER”  function key will be disabled. All Transfer operations will be failed.   Default  Transfer Mode Blind transfer and attended transfer is optional. Escape  #  as  %23 in SIP URI   The default setting is "Yes". Replaces “#” by “%23” for some special situations.   Offhook Auto Dial    The  phone  will  only  use  the  first  account  to  dial  out.  Once  enabled,  only  one extension  could  realize  this  function  while  others  can’t.  The  phone  will  dial automatically the number when the phone is offhook or press the hands-free button.  Offhook Timeout(s)    The  phone  will  exit  the  dial-up  interface  when  offhook  timeout.  The  default  is  "30 seconds ".  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 160   Figure 144 GXV3240 Web GUI Advanced Settings-Video Settings Table 19 Advanced Settings/Video Settings Parameters Frame Rate Configure  the  frame  rate  for  SIP  video  call.  The  default  setting  is  “15  Frames/ Second”.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 161   Figure 145 GXV3240 Web GUI Advanced Settings-Tone Generator Table 20 Advanced Settings- Tone Generator Parameters Parameters Description Call  Progress Tones Users  can  configure  ring  or  tone  frequencies  based  on  parameters  from  the  local telecom provider. By default, they are set to the North American standard.   Frequencies  should  be  configured  with  known  values  to  avoid  uncomfortable  high pitch sounds. ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of silence. In order to set a continuous ring, OFF should be zero. Otherwise it will ring ONms and a pause of OFFms and then repeat the pattern. Up to three cadences are supported.  Ring Back Tone   This defines the ring cadence for the phone. The default setting is: c=2000/4000.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 162   Figure 146 GXV3240 Web GUI Advanced Settings-MPK General Settings Table 21 Advanced Settings/ MPK General Settings Parameters BLF  Call-pickup Prefix The prefix when the phone using MPK to call up. Each account is set to  “**”by default. Event List URI The  Event  List  URI  in  MPK  list,  it  requires  server  support.  Users  should  firstly configure  a  Event  List  URI  including  expanded  list  on  the  server  (i.e.: BLF1006@myserver.com) and fill in URI without a domain name (i.e.:BLF1006).  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 163   Figure 147 GXV3240 Web GUI Advanced Settings- MPK LCD Settings Table 22 Advanced Settings/ MPK LCD Settings Parameters Key Mode Configure MPK key mode on the GXV3240 extension board  Speed Dial: Dial the uesr ID on the extension board.  BLF: Monitor the call ID status on the extension board.  Call  Transfer:  Transfer  the  current  active  call  to  the  user  ID  on  the extension board.  Call Intercom: Paging/Intercom User ID on the expansion board.  Speed Dial via Active: Similar to Speed Dial. The difference is to call via the  activated  account.  i.e.,  if  account  2  is  activated  when  offhook,  the phone will call the user ID on the extension board via account 2.  Dial DTMF: Dial DTMF of user ID on the extension board in an active call.  Call Park: Configure call park code when park or answering the call. MPK List The configured MPK will be displayed in MOK list. Users cold user up/down button or more buttons to move, edit and delete the members in the list. Account Configure the SIP account MPK key uses. Name Configure the name of the corresponding MPK key User ID Configure the user ID of the corresponding MPK key x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 164  Display Format  Display MPK format: User name, User ID, User ID(User Name) Show Display Name from Server   Figure 148 GXV3240 Web GUI Advanced Settings - MPK EXT Settings x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 165  Table 23 Advanced Settings/ MPK EXT Settings Parameters(Extension board 1/2/3/4) Account Set up the SIP account for MPK keys. Name Set up the corresponding name of MPK keys. User ID Set up the user ID corresponds to MPK keys. MPK ID MPK ID is used to one-to-one tag 160 MPK keys on the 4 extension boards. The default number is 1-160. The user can click on Up and Down button to view the MPK ID of each extension board.   i.e., modify the MPK ID on MPK 1 to 5, and the configuration of MPK 1will be the same as in MPK 5. Display Format Set up MPK display Format: Name, User ID, User ID (User name).User name corresponds to the GXV3240 contacts’ name.    Note: Refer to the GXV3240 User Manual for more details on extension board MPK configuration. http://www.grandstream.com/support(芳芳写的是 2200,需要确认)  MAINTENANCE   Users could configure the Upgrade, TR-069 and Time &Date on GXV3240. Select Maintenance in the WEB GUI menu bar to enter the maintenance page. See figure 152. x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 166   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 167    Figure 149 GXV3240 Web GUI Maintenance-Network Settings Table 24 Maintenance/Network Settings Parameters Parameters Specifications Address Type    Allows users to obtain IP address via the following modes  DHCP: Obtain IP address form DHCP server automatically.    PPPoE: Dial up via PPPoE.    Static IP: Static IP address configured by administrator. DNS Server 1   Enter the DNS Server 1. DNS Server 2   Enter the DNS Server 2.   Enable LLDP  Layer  3  QoS  for SIP   Defines  the  Layer  3  QoS  parameter  for  SIP  packets.  This  value  is  used  for  IP Precedence, Diff-Serv or MPLS.   Layer  3  QoS  for Audio   Defines  the  Layer  3  QoS  parameter  for  Audio  packets.  This  value  is  used  for  IP Precedence, Diff-Serv or MPLS.   Layer  3  QoS  for Video   Defines  the  Layer  3  QoS  parameter  for  Video  packets.  This  value  is  used  for  IP Precedence, Diff-Serv or MPLS.   Layer  2  QoS 802.1Q/VLAN Tag   Assigns the VLAN Tag of the Layer 2 QoS packets. The default value is 0.   NOTE: If the Layer 2 is uncertain, please don’t modify the Layer 2 tag and priority. Wrong configuration may cause IP access failure on the phone. Layer  2  QoS 802.1p  Priority Value   Assigns the priority value of the Layer2 QoS packets. The Default value is 0.   User-Agent Set up the user agent for Phonebook and Screensaver. 802.1x mode   Allows the user to enable 802.1 x modes on the phone.   Procy   Connect to the proxy server.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 168   Figure 150 GXV3240 Web GUI Maintenance-Time Settings Table 25 Maintenance-Time Settings Parameters Parameters Specification Assigned  NTP Server Address  Defines the URL or IP address of the specified NTP server to synchronize the date and time with NTP server.  DHCP  Option  42 override  NTP server   Defines whether DHCP Option 42 should override NTP server or not. When enabled, DHCP Option 42 will override the NTP server to synchronize the date and time on the phone. The default setting is "Yes".   DHCP  Option  2  to override  Time Zone setting   Allows  device  to  get  provisioned  for  Time  Zone  from  DHCP  Option  2  in  the  local server automatically. The default setting is "No".  Time Zone   Controls the date/time display according to the specified time zone. If DHCP Option2 is enabled, the DHCP server will skip this setup to control the time zone configuration on the phone directly.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 169  Time  Display Format   Configures the time display format on the LCD.   Date  Display Format   Configures the date display format on the LCD.    Figure 151 GXV3240 Web GUI Maintenance-Web/SSH Access Table 26 Maintenance/ Web/SSH Access Parameters Parameter Description Disable SSH   The default setting is “No”. If set to “Yes”, the phone will not allow any SSH access to the phone.   Access Method   Allows users to select HTTP or HTTPS for Web Access.   Port   This field  is  for  customizing  the  port  for  Web  Access  via  HTTP.  By  default,  HTTP uses port 80 and HTTPS uses port 443.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 170  Admin Password    Allows users to change the admin password. Only the administrator could configure the Advanced Configuration page. This field is case sensitive with a maximum length of 32 characters.   User Password   Allows the administrator to set the password for user-level GUI access. This field is case sensitive with a maximum length of 32 characters.    x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 171   Figure 152 GXV3240 Web GUI Maintenance-Upgrade Table 27 Maintenance/Upgrade Parameters x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 172  Parameters Description Configuration  via LCD Menu Set LCD menu configuration permission. No Limited or General Settings is optional. XML  Config  File Password   The  password  for  encrypting  the  XML  configuration  file  using  OpenSSL.  This  is required for the phone to decrypt the encrypted XML configuration file.   HTTP/HTTPS User Name   Input the authenticated user name if HTTP/HTTPS or configured server adopts User authentication mode. HTTP/HTTPS Password   Input the authenticated user password if HTTP/HTTPS or configured server adopts User authentication mode. Upgrade Via   Allows  users  to  choose  the  firmware  upgrade  method:  TFTP,  HTTP,  HTTPS  or manual upload.   Firmware  Server Path   Defines the IP address or domain name for the firmware upgrade server.   Configure  Server Path   Defines the IP address or domain name for the file server.  Firmware  File Prefix   The  default  setting  is  “Empty”.  If  configured,  only  the  firmware  with  the  matching encrypted prefix will be downloaded and flashed into the phone. This option appeals to service provider. End users don't need to fill in this option. Firmware  File Postfix   The default setting is “Empty”. End users don't need to fill in this option.  Configure  File Prefix   The default setting is “Empty”. End users don't need to fill in this option. Configure  File Postfix   The default setting is “Empty”. End users don't need to fill in this option. mDNS Server    If  set  to  “Yes”,  the  device  allows  mDNS  to  rewrite  configure/firmware  server.  The default setting is “Yes”. DHCP  Option  66 Override Server   The default setting is “No”. If set to “Yes”, the device will obtain IP address as well as firmware upgrade server address via DHCP(configured via DHCP). The address will override the path the “Firmware Server Path” specifies to fulfill auto deployment. The upgrade will use force TFTP.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 173  DHCP  Option  120 Override  SIP Server   Enables DHCP Option 120 from local server to override the SIP Server on the phone. 3CX  Auto Provision   Enables  automatic  provision  feature  on  the  phone  when  3CX  is  used  as  the  SIP server.  Automatic Upgrade    This function is set for the network service provider. The default setting is "No".   If  set  the  checking  time  for  every  week/day/intervals,  the  Auto  Upgrade  and  the corresponding  configurations  will  be  enabled.  Input  the  period  time  for  checking software upgrade or configuring upgrade in the textbox. The shortest interval is 60 minutes.   If set to “No”, the device only to upgrade when reboot. Period  Time  of Upgrade Checking   Specifies  the  time  period  to  check  for  firmware  upgrade  (in  minutes).  The  default setting is 10080 minutes (7 days).   Hour  of  the  Day (0-23)   Defines the  hour of the  day(0-23)  to check  the HTTP/TFTP  server for firmware upgrades or configuration files changes.  Day  of  the  Week (0-6)   Defines  the  day  of  the  week(0-6)  to  check  the  HTTP/TFTP  server  for firmware upgrades or configuration files changes.   Automatic Upgrade Rule   Defines the rules for automatic upgrade.   Automatic  Reboot for  Upgrade without  confirm boxes If set to “Yes”, the device will reboot automatically for upgrade after downloading the upgrade firmware. Otherwise the prompt for reboot will pop up on LCD before reboot. The default setting is “Yes”. Authenticate  Conf File   If set to “Yes”, Authenticates configuration file before acceptance.   Factory Reset   Restore to factory default settings. Users could also select “Clear the SD card”. Note: Please back up data before reset in order to avoid data loss.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 174   Figure 153 GXV3240 Web GUI Maintenance-Syslog Table 28 Maintenance/Syslog Parameters Parameters Description Syslog Server   The URL/IP address for the syslog server. This function appeals to the VOiP service server. Syslog Level    Selects the level of logging for syslog. The default setting is None. It means send no syslog.   The 4 levels from high to low are: DEBUG, INFO, WARNING and ERROR.   Syslog messages are sent based on the following events:   product model/version on boot up (INFO level);    NAT related info (INFO level);    sent or received SIP message (DEBUG level);    SIP message summary (INFO level);    inbound and outbound calls (INFO level);    registration status change (INFO level);    negotiated codec (INFO level);    ethernet link up (INFO level);    SLIC chip exception (WARNING and ERROR levels);    Memory exception (ERROR level).  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 175    Figure 154 GXV3240 Web GUI Maintenance-Logcat Table 29 Maintenance/Logcat Parameters Parameters Description Clear Log   Press the clear log button to clear log.   Log Tag   Specifies the log tag to filter the log.   Log Level Selects the log priority in the drop-down menu.    x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 176   Figure 155 GXV3240 Web GUI Maintenance –Debug Table 30 Maintenance/Debug Parameters Parameters Description Capture Trace   Press Start to start capturing a trace and press Stop to discontinue .Capture Trace will help to diagnosis. The default is disabled. View Trace   Press LIST to view the list of captured traces. It will show the time when the trace was captured. Click on the name of the file to download and view the trace.   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 177   Figure 156 GXV3240 Web GUI Maintenance-Language Table 31 Maintenance-Language Parameters Parameters Description Language    Select the language displayed on the phone. GXV3240 supports multi language: Chinese, English, Spanish, French, Russian and etc. x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 178   Figure 157 GXV3240 Web GUI Maintenance-TR-069 Table 32 Maintenance/TR-069 Parameters Parameters Description Enable TR-069   If set to "Yes", the phone will send session connection request to the ACS.   ACS URL    URL for  TR-069 Auto Configuration Servers (ACS). There are 2 methods toidentify ASC server: IP Address i.e: http://10.10.10.1:9090 Domain Name i.e:http://huawei.acs.com:9090 Note: 9090 is the port number of ASC server   x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 179  ACS username    ACS username to authenticate TR-069 when the phone sends connecting request to ASC. It should be in accordance with ASC configuration. ACS password ACS password for TR-069. It should be in associated with ASC configuration. Periodic  Inform Enable   If set to "Yes", the phone will send inform packets to the ACS periodically.   Periodic  Inform Interval (s)   Sets up the periodic inform interval (in seconds) to send the inform packets to the ACS.   Connection Request Username   The username to authenticate ACS when the ASC server sends connecting request to the phone. It should be in associated with ASC configuration.   Connection Request Password   The password for the ACS to connect to the phone. The phone should in accordance with ACS server configuration. Connection Request Port   The  port  for  the  ACS  to  connect  to  the  phone.  It  cannot  be  occupied  by  other applications, i.e: the device can’t use the port that SIP 5060 or 5004 uses. CPE Cert File   The Cert File for the phone to connect to the ACS via SSL. CPE Cert Key The Cert Key for the phone to connect to the ACS via SSL.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 180   Figure 158 GXV3240 Web GUI Maintenance-Contacts Table 33 Maintenance/Contacts Parameters Parameters Description Import/Export File Encoding Supports import/export Contacts: UTF-8,GBK,UTF-16,UTF-32,Big5,Big5-HKSCS,Shift-JIS,IOS8859-1,IOS8859-15,Windows-1251,EUC-KR.  File Type Supports import/export Contacts: XML,VCard,CSV. Save Phonebook to PC Allow users to save XML file to PC. Click Save to save Phonebook file with configured coding format and file format to PC. Clear The Old List The  phone  will  delete  all  the  old  list  before  downloading  new  ones  if check. The default is uncheck. 批注 [J1]: 缺少其他文件编码 x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 181  Replace Duplicate Items The phone will delete all the duplicated items before downloading new ones if check. The default is uncheck. Local File Click Browse to select XML file and download it to the phone. Download Clear The Old List The phone will delete all the duplicated items before downloading new ones if check. The default is uncheck. Replace Duplicate Items The phone will delete all the duplicated items before downloading new ones if check. The default is uncheck. Download Mode Select network download mode: OFF/TFTP/HTTP. File Encoding Supports import/export Contacts: UTF-8,GBK,UTF-16,UTF-32,Big5,Big5-HKSCS,Shift-JIS,IOS8859-1,IOS8859-15,Windows-1251,EUC-KR. The default is UTF-8. Download Server Set up the server to download with from network. Download Now Click Download to download Contacts file to the phone from the configured server. Note: The contacts file must be the formatted file the phone supports. Download Interval(m) The interval to download from server. The default is None, namely will not automatically request download, users can set up as needed.  x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 182   Figure 159 GXV3240 Web GUI Maintenance-LDAP Book Table 34 Maintenance/LDAP Book Parameters Parameters Descriptions Server Address LDAP server address, users could input IP address or domain name. Port Set up the port number of LDAP server. Base DN Set  up  the  base  DN  to  inquire  on  the  serve  ,namely  under  which directory to inquire contacts.i.e., dc=grandstream, dc=com   ou=Boston, dc=grandstream, dc=com User Name Set  up  the  username  to  login  LDAP  server.  Some  LDAP  servers support anonymous login without username. Password Set  up  the  password  to  login  LDAP  server.  If  the  LDAP  server support anonymous, users could login without password. x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 183  LDAP Name Attributes Set up the name attribute of each record returned from LDAP search. It  allows  users  to  configure  multiple  name  attribute  separated  by spaces. i.e., gn cn sn description。 LDAP Number Attributes Set up the number attribute of each record returned from LDAP search. It allows users to configure multiple number attribute separated by spaces. i.e.,   telephoneNumber  telephoneNumber Mobile。 LDAP Mail Attributes Set up the mail attribute of each record returned from LDAP search. It  allows  users  to  configure  multiple  mail  attribute  separated  by spaces. i.e., mail mail mailbox。 LDAP Name Filter Set up the filter when configure name inquiry.i.e., (|(telephoneNumber=%)(Mobile=%) return all “telephoneNumber” or contacts with specified filter value in “Mobile” f. (&(telephoneNumber=%)  (cn=*))  return  all  contacts  with  specified filter value with “cn“ field in “telephoneNumber”. LDAP Number Filter Set up the filter when configure number inquiry.i.e., (|(telephoneNumber=%)(Mobile=%) return all “telephoneNumber” or contacts with specified filter value in “Mobile”. (&(telephoneNumber=%)  (cn=*))  return  all  contacts  with  specified filter value and the set “cn“ field in “telephoneNumber”. LDAP Mail Filter Set up the filter when configure mail inquiry.i.e., (|(mail=%)(mailBox=%)) return all contacts with specified filter value in “Mail” or“Mailbox”  . (!(mail=%)) return all contacts without specified filter value in “Mail” ; (&(mail=%) (cn=*)) return all contacts with specified filter value and the set “cn“field in “mail”. LDAP  Displaying  Name Attributes Display  onscreen  name  attribute,  up  to  three  attributes.  Such as:%cn %sn %telephoneNumber   Max Hits Set up the max hit return to the LDAP server. If set to “0”, the server will return all searched results. The default setting is 50. Search Timeout(ms) Set  up  the  search  timeout  return  after  inputting  search  info.The default setting is “0”. LDAP Lookup For Dial Set up whether to appy LDAP lookup for dial. The default setting is x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 184  “No”. LDAP  Lookup  For Incoming Call Set up whether to appy LDAP lookup for incoming call. The default setting is “No”.  Figure 160 GXV3240 Web GUI Maintenance-Device Manager Table 35 Maintenance/Device Manager Parameters Parameters Description AE Mode Users could set up the environment settings  to obtain better visual effect. Bright environment and dark environment are optional. Disable  Missed  Call Backlight If  set  to  “Yes”,  the  LCD  backlight  will be  disabled  when there  is  a missed call. The default setting is “No”. Disable  Missed  Call Indicator If  set  to  “Yes”,  the  LCD  backlight  will be  disabled  when there  is  a missed call. The default setting is “No”. x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 185  Disable MWI Indicator Set up whether to disable LED MWI Indicator when there is a unread message. The default setting is “No”. Disable  New  Message Indicator If  set  to  “Yes”,  the  indicator  will  be  disabled  when  there  is  a  new message. The default setting is “No”. Disable  Contact  or Message Full Indicator If  set  to  “Yes”,  the  indicator  will  be  enabled  when  the  storage  of contacts or messages is full. The default setting is “No”. Disable  Indicator  When LCD is Off  If set to  “Yes”, the indicator will be disabled  when  LCD  is Off.  The default setting is “No”. RJ9  Headset  TX  Gain (dB) The  headphone  volume  setting  controls  the  sent-out  audio  signal. The default is “0”. RJ9  Headset  RX  Gain (dB) The  headphone  volume  setting  controls  the  received  audio  signal. The default is “0”. 3.5mm  Earphone  TX Gain (dB)  3.5mm  Earphone  RX Gain (dB)  Headset Type Select Normal headset or EHS headset type. Headset Key Mode Users  could  select  Default  Mode  or  Toggle  Headset/  Speaker. Please refer to the user manual for details 1. Default Mode When  the  phone  is  running  in  idle  screen,  press  the  hardkey HEADSET and off hook to dial. The headset icon will be displayed on top of the calling interface.   Press the  hardkey  HEADSET  and off  hook to  speak  via headset  if there is an incoming call. Press  the  hardkey  HEADSET  to  hang  up  the  call  if  the  user  is speaking via the headset during an active call. Press the hardkey HEADSET to switch to the headset if the user is speaking  via  speaker  or  handset.  Press  the  hardkey  HEADSET again  to  hang  up  the  phone.  Press  the  hardkey  HEADSET /SPEAKER to switch to the previous calling mode.   2. Toggle Headset/Speaker When  the  phone  is  running  in  idle  screen,  Press  the  hardkey HEADSET to enter the headset mode and the screen will display the x-PDFDivision
GXV3240 User Manual GXV3240 WEB GUI   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 186  corresponding icon. Press the hardkey HEADSET or the numeric key will initiate the headset mode as default. Press  the  Answer  button  on  screen  or  the  hardkey  HEADSET  to speak via headset when there is an incoming call Press  the  hardkey  HEADSET  to  switch  to  the  Headset/Speaker during an active call . x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 187  UPGRADING AND PROVISIONING GXV3240 supports software upgrade via TFTP or HTTP/HTTPS. Go to Advanced Settings page to configure. CONFIGURATION FILE DOWNLOAD Grandstream SIP Devices can be configured via the WEB Interface as well as via a Configuration File (binary or XML) through TFTP or HTTP/HTTPS. The “Config Server Path” is the TFTP, HTTP or HTTPS server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP  address  format.  The  "Config  Server  Path"  can  be  the  same  or  different  from  the  "Firmware Server Path". A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and multiple digit numeric numbers. i.e., P2 is associated with the “Admin Password” in the Web GUI->Maintenance->Web/SSH Access page.   Note: For a detailed parameter list, please refer to the corresponding firmware release configuration template. x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 188  When a Grandstream Devices boots up or reboots, it will issue a request for a configuration XML file named "cfgx.xml" followed by a file named "cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the MAC address of the device, i.e., "cfg000b820102ab". The configuration file name should be in lowercase letters.   For more details on XML provisioning, please refer to:   http://www.grandstream.com/general/gs_provisioning_guide_public.pdf   CONFIGURE SERVER CONFIGURE TFTP SERVER The following chapter will take 3CDaemon TFTP as an example. 1. Open the HTTP server, as shown in figure 160 below.  Figure 161 HFTP Server Interface 2. Click  “Configure TFTP Server”to bring out the dialog as shown in figure 161. x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 189   Figure 162 HFTP Server Interface -Configure Dialog 3. Set the path to save the file under  “Upload/Download”in“TFTP Configuration”tab.  Figure 163 Set HFTP Server Path 4. Select the path then click “Ok” to bring out the following dialog.  Figure 164 Confirm Changes x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 190  5. Click “Yes” to confirm changes. 6. Click “Ok” to close the dialog.  Note: The file uploaded to sever should be unzipped.bin file. CONFIGURE HTTP SERVER The following chapter will take 3CDaemon TFTP as an example. You  could  obtain Apache HTTP  server installation provisioning from http://httpd.apache.org,  and follow the wizard to complete the default installation. The following chapter will take using Apache HTTP Server2.2 in Windows XP as an example. 1. Open Apache server, go to Start > All Programs > Apache HTTP Server 2.2 > Monitor Apache Servers on a PC installed with Apache server. The  icon    in  the  notification  area  of  the  taskbar  indicates  the  Apache  server  has  been enabled. Select "Start" to enable the server when see . 2.   Save  the  file  under  the  following  path:  Installation  Path\Apache  Software Foundation\Apache2.2\htdocs.   Note  If the file is saved under htdocs folder, the URL format for the phone to access Apache server is: http:// IP address of the PC installed with Apache server. i.e., http://192.169.1.51  If the file is saved under htdocs subfolder, the URL format for the phone to access Apache server is: http:// IP address of the PC installed with Apache server /Subfolder Name. i.e., http://192.169.1.51/filename x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 191  FIRMWARE UPDATE GXV325 supports the following ways to update  Update via upload firmware file    Manual update via firmware file    Auto update via firmware server This chapter will introduce the three upgrade methods in details.   Note:  It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device in the process of update or it might be fail.  Please unpack the compression package before upload the file for update. UPDATE VIA UPLOAD FIRMWARE FILE   1. Go to Maintenance> Upgrade, set the update type to “Manual” and click the Upload button.    x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 192  Figure 165 Select Firmware File 2. The pop-up dialog will show on screen, users could confirm to update according to the prompt.   MANUAL UPDATE The steps to update file via HTTP are the same as via TFTP. Theis chapter will take via TFTP as an example. 1. Go to Maintenance>Upgrade, Select “No” in “ Automatic Upgrade” ,as shown in figure 165.                   Figure 166 Set up Auto Update 2. Go to Maintenance>Upgrade, Select “Always Check at Bootup” in “Automatic Upgrade Rule” option, as shown in figure 166.                  Figure 167 Set up Automatic Upgrade Rule 3. Set up upgrade mode and upgrade server. Select “TFTP”in “Upgrade Via”option and input the local  TFTP  server  address  in  the  “Firmware  Server  Path”  option.  URL  and  IP  address  are optional. See figure 167.                   Figure 168 Set up Firmware update Mode x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 193  4. Uncheck  “DHCP  Option  66  Override  Server”,  as  shown  in  figure169.If  check,  it  allows  the phone to obtain IP address as well as the upgrade server address via DHCP. This address will override the “Firmware server path” configured in step 3.                       Figure 169 Set up whether to Enable Option 66 Override Server 5. Click “Save” to save the change. 6. Click the Reboot icon to boot up the phone and upgrade the device. AUTO UPGRADE The steps to upgrade via HTTP are the same as steps via TFTP. This chapter will take via TFTP as an example 1. Go  to  Maintenance>Upgrade,  set  up  the  rational  upgrade  check  interval  in  “Automatic Upgrade” option as shown in figure 169.               Figure 170 Automatic Upgrade Setting 2. Go to Maintenance>Upgrade, Select “Always Check at Bootup” in “Automatic Upgrade Rule” option, as shown in figure 170. x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 194    Figure 171 Automatic Upgrade Rule Setting 3. Set up upgrade and upgrade server. Select “TFTP”in “Upgrade Via ”option and input the local TFTP server address in the “Firmware Server Path” option. URL and IP address are optional. See figure 171.                  Figure 172 Upgrade Setting 4. Uncheck  “DHCP  Option  66  Override  Server”,  as  shown  in  figure  180.If  check,  it  allows  the phone to obtain IP address as well as the upgrade server address via DHCP. This address will override the “Firmware server path” configured in step 3.                      Figure 173 Set up Whether to Enable DHCP Option 66 Server 5. Click “Save” to save the change. The phone will automatically upgrade when detects new firmware version on the sever. FACTORY RESET Warning! x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 195  WARNING: Restoring the Factory Default Settings will DELETE all configuration information on the phone. Please  backup or  print  all the  settings  before  you restore to  the factory  default  settings. Grandstream is  not responsible for restoring lost  parameters and cannot connect your device to your VoIP service provider VIA LCD MENU Follow the steps below to restore the GXV3240 to the factory default settings. 1. Press the MENU button and tap on Settings on GXV3240 desktop, or go to onscreen MENU->Settings >Advanced Settings >Factory Reset;   2. Tap on Factory Reset to bring out the dialog as shown in figure 173.  Figure 174 Factory Reset 3. Click OK to restore the phone to factory settings.   VIA THE WEB GUI 1. Login GXV3240 Web GUI and go to Maintenance->Upgrade page;   x-PDFDivision
GXV3240 User Manual UPGRADING AND PROVISIONING   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 196  2. Click on the Reset button for Factory reset. See figure 174.  Figure 175 Web GUI-Factory Reset 3. A dialog box will pop up shown in figure 175;  Figure 176 Web GUI-Confirm Factory Reset 4. Click OK to restore the phone to factory settings.    VIA BUTTONS When the message waiting indicator LED goes out the first time after the GXV3240 is powered, press    and    at  the  meanwhile.  When  the  indicator  is  on  again,  the  phone  will  restore  to factory settings. x-PDFDivision
GXV3240 User Manual FAQs   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 197  FAQs Q: Why my GXV3240 screen is dark? Please check whether your phone is powered on. Please ensure that the GXV3240 is connected correctly to the power adapter.  Q: Why my GXV3240 touch screen is not sensitive? Check that the power adaptor for GXV3240 is the original 12V BY adaptor.  Q: Why I can’t hear the dial tone through my GXV3240? Please ensure that all units of the GXV3240 have been installed and connected correctly. Please refer to <GXV3240 Quick Installation Guide> to install the phone.  Q: Why my GXV3240 doesn’t ring when there is an incoming call? Please check whether the phone volume has been set to minimum. Tap on    to turn up the volume.  Q: Where can I check the GXV3240 IP address? Please tap on the Account icon on the desktop then check the IP address on the upper left corner of the page. See figure 184.   x-PDFDivision
GXV3240 User Manual FAQs   Grandstream Co., Ltd  Software Version:1.0.0.11 Document Version:0.1 198  Q: How to change the user password? Please login the WEB GUI, go to Maintenance->Web/SSH Access and input new password in the textbox of” User Password” option, save the change then reboot the phone.  Please visit our website: http://www.grandstream.cn/ for answers to your more questions. x-PDFDivision

Navigation menu