Grandstream Networks GXV3275 IP MULTIMEDIA PHONE User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	2233486
Application ID	2R1pSssu63WWg/VM1B6PYw==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	345.31kB (4316402 bits)
Date Submitted	2014-04-03 00:00:00
Date Available	2014-04-03 00:00:00
Creation Date	2014-03-30 04:12:35
Producing Software	Nestone x-PDFDivision
Document Lastmod	2014-03-30 04:12:35
Document Title	User Manual 2
Document Creator	Microsoft® Office Word 2007

GXV3275 User Manual
TOOLS
Long press
on the upper right corner to add number to blacklist. There are 3 ways

to add number: Manually add, Add from contacts, Add from Call History. Select one way
Di
vis
ion
and tap on”OK” to add the corresponding number to blacklist.
Long press one blacklist log to enter the editing mode to edit or delete the selected
contacts. Users could edit the contact If select one blacklist entry only. See figure 92.
x-P

DF
Figure 91 GXV3275 Manually Add Number to Blacklist
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
95
TOOLS
GXV3275 User Manual
Figure 92 GXV3275 Editing Blacklist List
： Blacklist Settings.
Di
vis
ion


DF
Figure 93 GXV3275 Blacklist Settings
DND Mode: Turn on/off DND mode. Once it’s turned on, the phone would reject all incoming

x-P
calls.
Block Mode: Turn on/off Block Mode. Once it's turned on, the incoming calls from the numbers
in the blacklist will be rejected.

Block Options: Set the types of incoming calls. This option is valid once the Block Mode is
turned on.

Block Notification: Set up whether to notify user after blocked calls. Once it's turned on, the
block icon
will be displayed in the status bar after the device blocked calls. Users could
go to the notification bar to view details. See figure 94.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
96
TOOLS
ion
GXV3275 User Manual
Figure 94 GXV3275 Blacklist –Block History Notification
vis
Time Settings: Set up the block schedule.
Di

x-P
DF
SMS
GXV3275 enables you to send/receive text message between phones or other devices equipped
with SMS function. Click
in the main menu to enter SMS page as shown in figure 95 below.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
97
TOOLS
vis
Figure 95 GXV3275 SMS List
ion
GXV3275 User Manual
Note:
Di
SMS function is not available in all countries and regions, for more information, please
x-P
VIEW SMS
DF
contact your service provider.
The SMS page displays the received and sent SMS list, which are classified by contacts names or
numbers as well as sorted by the time receive or send SMS. Tap on one specific SMS entry to view
the interaction with the details of the contact's message, as shown in figure 96 below.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
98
TOOLS
vis
Figure 96 GXV3275 Send SMS
Di
NEW SMS
DF
in the toolbar on the SMS page to access SMS draft page. See figure 97.
x-P
Tap on
ion
GXV3275 User Manual
Figure 97 GXV3275 New SMS
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
99
TOOLS
GXV3275 User Manual
1. Select the account to send SMS in the drop-down menu.
2. Add contact. GXV3275 supports adding contact from the Contacts as well as directly input
phone number.

Input the number in the textbox then input comma to add another contact.

Press
to select contacts or groups from the Contacts.
vis
4. Input the message via the keyboard then touch “Send”.
ion
3. Click the textbox below to bring out the intelligent keyboard.
DF
Di
MANAGE SMS
x-P
DELETE SMS
1. Long press one SMS to entry the editing mode.
2. Check the SMS you would like to delete and when it turns to blue background and the icon
indicates the SMS has been selected and click again to unselect the SMS. Users
could also tap on
on the upper left corner to batch select/unselect.

Select all indicates selects all SMS in the list.

Unselect all indicates unselect all SMS in the list.
3. Press
to delete the selected message.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
100
TOOLS
GXV3275 User Manual
RECORDER
Users could record conference, institution and personal notes via GXV3275 Recorder conveniently.
There is no time limit to recording time and the larger the available storage capacity is, the longer
x-P
DF
Di
vis
ion
the recording time is. Users could also find the recording file in the recorder and listen to it.
Figure 98 GXV3275 Recorder
NORMAL RECORDER
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
101
TOOLS
Figure 99 GXV3275 Normal Recorder
to initiate recording.
vis
1. Tap on
ion
GXV3275 User Manual
Di
2. Click “Save” to save the record file, click “Cancel” will bring out the dialog for users to
x-P
DF
confirm whether to save the file or not and to stop recording.
Figure 100 GXV3275 Normal Record-Recording
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
102
TOOLS
GXV3275 User Manual
3. Go back to the Recorder page, select one recording file and click
on the right of the
progress bar to play the file.
CALL RECORDER
In the process of an active call, the recording file will be saved on the phone. Users can only listen
x-P
DF
Di
vis
ion
to it via Recorder. See figure 101 below.
Figure 101 GXV3275 Call Recordings
IP LOCATION
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
103
TOOLS
GXV3275 User Manual
Based on the IP address provided, the following information will be given: Country, Region and City.
Di
vis
ion
See figure 102.
x-P
DIAGNOSIS
DF
Figure 102 GXV3275 IP Location
Users could make operation like LCD Diagnosis, Keypad Diagnosis, LED Diagnosis, Audio
Loopback and Camera Test on GXV3275 via built-in Diagnosis app.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
104
TOOLS
vis
Figure 103 GXV3275 Diagnosis
ion
GXV3275 User Manual
x-P
DF
Di
FTP SERVER
Gxv3275 supports file transfer via FTP server. As shown in figure 104.Users can tap on “Start FTP
Server” to activate it.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
105
TOOLS
Figure 104 GXV3275 FTP Server
ion
GXV3275 User Manual
vis
Once enabled, the field is shown in figure 105. Input the FTP address in the browser on the
x-P
DF
Di
computer. i.e., ftp://192.168.124.136:2121/
Figure 105 GXV3275 FTP Server- Start FTP Server
Before start the FTP server ,you can tap on
on the lower right corner of the page to access
the settings .You can set the username and password, port number and the file directory to login the
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
106
TOOLS
GXV3275 User Manual
ion
remote server.
x-P
DF
Di
vis
Figure 106 GXV3275 FTP Server Settings
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
107
MULTIMEDIA
GXV3275 User Manual
MULTIMEDIA
GXV3275 supports rich multimedia applications, users can play music and images on the device as
ion
well as surf the Internet to view news.
x-P
DF
Di
vis
GALLERY
Gallery could be used to view pictures from GXV3275 internal storage. Click
menu to enter gallery.
in the main
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
108
MULTIMEDIA
Figure 107 GXV3275 Gallery
The image folder from GXV3275 local storage will present on the Gallery page in the form of
vis

ion
GXV3275 User Manual
Click
on the upper right to enable camera to take photos or videos.
DF

Di
thumbnails, click the specific folder to enter image list interface.
x-P
Click the image folder to enter images list page, as shown in figure 108.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
109
MULTIMEDIA
GXV3275 User Manual
Figure 108 GXV3275 Gallery-Images List

Tap the slider to the left or right to flip to view all the images.

Two modes to display images: users could tap on the switch button on the upper left corner
to view images via Grid or Slide.
Click the specific image to view it in full screen mode. See figure 109.
x-P
DF
Di
vis
ion

Figure 109 GXV3275 Gallery- View Image in Full Screen

Tap on the screen when the image is in full screen and click
on the lower left corner to
edit the image. Users could add effect to the image as well as crop/rotate the image, ect.
The second way is to click the Menu button to edit the image.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
110
MULTIMEDIA
ion
GXV3275 User Manual
x-P
DF
Di
vis
Figure 110 GXV3275 Gallery- Edit Image
Figure 111 GXV3275 Gallery- Edit Image via Menu Options

Zoom In/ out ：Users could zoom in/out the image via finger gestures.

Share: Click
on the upper right corner of the image to select one mode to send the
image.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
111
MULTIMEDIA
GXV3275 User Manual

Long press one image to enter the editing mode. Users could choose one or multiple images
vis
ion
to make operations like send, delete and rotate.
DF
Di
Figure 112 GXV3275 Gallery- Editing Image
x-P
BROWSER
Users could browse webpage, view news and watch video via the built-in GXV3275 Browser. Press
on
in the main menu to open Browser.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
112
MULTIMEDIA
Figure 113 GXV3275 Browser
ion
GXV3275 User Manual
Slide up and down with slide gesture to scroll the screen.

Zoom in/out the page via zoom gesture.

Press the menu button on the phone to open the menu bar for more operations. AS shown
DF
Di
vis

x-P
in figure 114.
Figure 114 GXV3275 Operating Browser via Menu Options
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
113
MULTIMEDIA
GXV3275 User Manual
MUSIC
Users could play the audio file on the phone or from the external storage. Press
in the main
x-P
DF
Di
vis
ion
menu to enable Music.
Figure 115 GXV3275 Music Interface
RSS NEWS
Rss News is a desktop widget with which users could view the latest news. When the phone is
running on idle screen, click the Menu button and select Edit Widgets in the pop-up menu, find RSS
News and drag it to the blank area of the desktop.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
114
MULTIMEDIA
ion
GXV3275 User Manual
vis
Figure 116 GXV3275 RSS News Widget
Click the up/down arrow on the right of RSS News to flip up or down.

Click the Refresh button on the left bottom of RSS News to refresh the news.

Click the Settings button on the right bottom of RSS News to set up News Update Interval,
DF
Di

x-P
Page-turning Intervals, Subscribe and RSS Feeds.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
115
MULTIMEDIA
GXV3275 User Manual
Figure 117 GXV3275 RSS News Settings
WEATHER FORECAST
Weather Forecast is a desktop widget with which users can view real-time weather information. The
way to add it is when the phone running on idle screen, Click the menu button and select Edit
Widgets in the pop-up menu items, find the Weather Forecast and drag it to the blank area of the
x-P
DF
Di
vis
ion
desktop.
Figure 118 GXV3275 Weather Forecast Widget

Click the Refresh button on the upper right corner to update weather data.

Click other area on the widget field to enter the detailed interface, as shown in figure 119.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
116
MULTIMEDIA
ion
GXV3275 User Manual
vis
Figure 119 GXV3275 Weather Forecast- Details Interface
Users could set up Update, Share, Add City and other settings on the toolbar below the Weather
x-P
DF
Di
Forecast detailed interface.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
117
GS MARKET
GXV3275 User Manual
ion
GS MARKET
vis
GXV3275 provides direct access to apps via built-in GS Market app. Users could download the
in the main menu to access GS Market.
x-P
Click
DF
VIEW APP’S DETAILS
Di
apps from the market and install to local.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
118
GS MARKET
GXV3275 User Manual
Figure 120 GXV3275 GS Market
Click the app icon to view details and users evaluation.
SEARCH APPS
Users could view the apps by category, or tap on
to bring out the textbox and input the
ion
keyword of the app to search.
Click
below the app to download and install it. The icon
will be shown below the
Di

vis
DOWNLOAD AND INSTALL APPS
Tap on
on the upper right of the page to view the download apps and installed apps.
As shown in figure 121.
x-P

DF
downloaded app, click the icon to open the corresponding app.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
119
GS MARKET
GXV3275 User Manual
Figure 121 GXV3275 GS Market-Download

The installing process will be automatically started after downloaded the app. Users could
tap on Installed tab to view the installed apps, or uninstall the downloaded apps on this
page.
UPDATE APPS
ion
The GXV3275 will automatically detect if there is new version available for the installed apps to
upgrade when the network connection is normal. User can view the relevant information and update
x-P
DF
Di
vis
apps on the Installed page, as shown in figure 122below.
Figure 122 GXV3275 GS Market - Installed
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
120
GXV3275 User Manual
CONNECTING TO NETWORKS AND DEVICES
CONNECTING TO NETWORKS AND DEVICES
ion
NETWORK
Network connection has a variety of ways, one is wired connection via the cables, and the other
vis
way is to connect via Wi-Fi.
Di
ENABLE ETHERNET
DF
Follow the steps below to turn on Ethernet:
enter Network Settings.
x-P
1. Insert the cable into the LAN port behind the phone then go to Settings and click Network to
2. Click Ethernet Settings and choose IPv4 or IPv6 to enter Settings.
3. Set the address type to static IP then set up the IP address and subnet mask.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
121
GXV3275 User Manual
CONNECTING TO NETWORKS AND DEVICES
DHCP
If there are no requirements for network, users could select DHCP to reduce the risk of network
disconnection. The steps 1 and 2 to obtain DHCP are the same as the steps in Ethernet Settings.
Step 3 is to select DHCP.
ENABLE PPPoE
ion
If the network is ADSL, users can connect to the network by means of dial-up. The steps 1 and 2 to
enable PPPoE can be set following the steps above in Turn on Ethernet. Step 3 is to choose PPPoE
Di
vis
to enter the corresponding Settings page and input the relevant account ID and password.
DF
WI-FI
ENABLE WI-FI
x-P
Please make sure that Wi-Fi has been turned on if users choose to use it for network connection.
There are two ways to enable Wi-Fi:

Go to Settings and tap on Network to enter Wireless& Network Settings page, tap on the Wi-Fi
switch button to enable it.

Click
to enable Wi-Fi in the drop-down status bar.
The phone will automatically connect to the available Wi-Fi once enabled, users need to go to Wi-Fi
Settings page to enter the password if the Wi-Fi requires password to login.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
122
CONNECTING TO NETWORKS AND DEVICES
GXV3275 User Manual
SEARCH AND ADD WI-FI
The phone will automatically search the available WI-Fi Within the effective range once enabled.
Tap on the SSID and input the right password in the pop-up dialog, click Connect to connect to the
DF
Di
vis
ion
selected Wi-Fi.
BLUETOOTH
x-P
Figure 123 GXV3275 Wi-Fi Connection
Users could use the Bluetooth to transfer files as well as make calls and listen to the music.
ENABLE BLUETOOTH
There are two ways to enable Bluetooth:

Go to Settings and click Network to enter Wireless& Network Settings page. Click the switch to
enable the Bluetooth.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
123
CONNECTING TO NETWORKS AND DEVICES
GXV3275 User Manual

Click
to enable the Bluetooth in the drop-down status bar.
Users need to pair the Bluetooth after enabled it then put it into use.
BLUETOOTH SETTINGS
Users could set up whether all the discovered Bluetooth in range will show or not on the Bluetooth
x-P
DF
Di
vis
ion
Settings page once enabled the Bluetooth, the available detection duration is 2 minutes.
Figure 124 GXV3275 Bluetooth Settings
SEARCH AND PAIR BLUETOOTH
On the Bluetooth Settings page will display the IDs of all paired and available devices. If the device
you would like to pair with does not show up in the list, you can manually search the Bluetooth
devices nearby. Follow the steps below to search and pair the Bluetooth:
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
124
GXV3275 User Manual
CONNECTING TO NETWORKS AND DEVICES
vis
ion
1. Tap on the Menu button and select Search Device in the pop-up menu.
Di
Figure 125 GXV3275 Search Bluetooth
2. Search for the device you want to pair in the Available Devices.
x-P
DF
3. Tap on the device ID on GXV3275, The pop-up dialog is shown in figure 126:
Figure 126 GXV3275 Pair Bluetooth
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
125
CONNECTING TO NETWORKS AND DEVICES
GXV3275 User Manual
4. Tap on the Pair button to pair Bluetooth. This is a two-way operation, namely the Bluetooth
that being requested to pair should accept the pairing request. Users could find the device
ID in the Paired Devices after pairing successfully.
CONNECTING TO A BLUETOOTH DEVICE
Users could find the pairing Bluetooth in the Paired Devices. Tap on it to connect. The connected
device will display the corresponding status.
to unpair Bluetooth as well as rename and configure it.
x-P
DF
Di
vis
ion
Tap on
Figure 127 GXV3275 Bluetooth Device Settings
SEND FILES VIA BLUETOOTH
Users could transmit file and Contacts data via Bluetooth when the Bluetooth is connected
successfully. Select one target device and click “Send” to transmit file. See figure 128.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
126
CONNECTING TO NETWORKS AND DEVICES
ion
GXV3275 User Manual
Figure 128 GXV3275 Send File via Bluetooth
vis
The GXV3275 will display the following page as shown in figure 129 when receiving a request to
x-P
DF
Di
transmit file. Click “Yes” to download the file under SD Card/Bluetooth directory.
Figure 129 GXV3275 Transmit File via Bluetooth
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
127
CONNECTING TO NETWORKS AND DEVICES
GXV3275 User Manual
USE BLUETOOTH HEADSET FOR CALLS
。
Users could switch voice channel in the process of calls once Bluetooth headset is connected
successfully. Refer to the chapter Via Bluetooth for details.
EHS HEADSET
ion
Insert headset connector to into the LINE port on the back of GXV3275, a headset icon will show on
the status bar as shown in figure 129. The EHS headset will ring synchronously when there is an
vis
incoming call. Refer to the EHS Headset Manual for detailed operations. Refer to the chapter Via
DF
Di
EHS Headset to learn how to switch EHS headset voice channel.
x-P
Figure 130 GXV3275 EHS Headset Status
Go to http://www.grandstream.cn/Wenti_view.aspx?Id=110to view headset compatibility.
EXTERNAL USB DEVICE
Insert the USB device to the USB port on the right side of the GXV3275, a USB device icon will
show on the status bar. Users could also open the File Manager to view external USB drive status
and the files stored in it. See figure 131.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
128
CONNECTING TO NETWORKS AND DEVICES
ion
GXV3275 User Manual
vis
Figure 131 GXV3275 External USB Drive Status
DF
Di
EXTERNAL SD CARD
Insert the SD card to the SD port on the right side of the GXV3275, a SD card icon will show on the
stored in it. See figure 132.
x-P
status bar. Users could also open the File Manager to view the external SD card status and the files
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
129
CONNECTING TO NETWORKS AND DEVICES
ion
GXV3275 User Manual
x-P
DF
Di
vis
Figure 132 GXV3275 External SD Card Status
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
130
GXV3275 LCD SETTINGS
GXV3275 User Manual
GXV3275 LCD SETTINGS
The GXV3275 LCD MENU provides easy access to the settings on the phone that
ion
making it more convenient to accommodate users’ habits. There are two ways to Follow open

Press the Menu button
Di
in the main menu.
when the phone is running on idle and select “System
Settings” in the pop-up menu.
The Settings page is shown in figure 133.
DF
Click
x-P

vis
Settings:
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
131
GXV3275 LCD SETTINGS
GXV3275 User Manual
Figure 133 GXV3275 System Settings
PERSONALIZED ACCOUNT
Personalized Account allows users to set up varied ring tone and personalized features to each
account. Go to Personalized Account page, tap on one account to set. The account will show up
with registration status on the right side of the Personalized Account menu.
Ringtone: Select ringtone for the incoming call. If choose Custom Ringtone, users could
ion

select the custom ringtone in the File Manager. Users could view the name of selected
Auto-Answer: Select whether to answer automatically for the incoming call. If set to “Always”,
Di

vis
music files in the Ringtone Settings on LCD as well as Web GUI.
DF
the phone will enable the speaker automatically to answer the incoming call after it rings for
the first time. If set to Enable Intercom/Paging or Select “Broadcast” in Feature Key
sent from the server/proxy.

x-P
Synchronization option in the Call Settings, it will answer the call based on SIP header info
Shared Call Appearance (SCA): Select the shared-call-appearance (SCA) of the account,
including whether to enable the shared account, whether to enable Barge-in, and whether to
auto fill in the CallPark service code, set up CallPark service code and Seize Line timeout.

Call Forwarding: Select the call forwarding features for the account.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
132
GXV3275 LCD SETTINGS
GXV3275 User Manual
WIRELESS & NETWORK
Users could configure network connection features via Wireless & Network.

Ethernet settings: Set up a series of network parameters like DHCP.

Wi-Fi: Check/uncheck to turn on/off Wi-Fi. The GXV3275 would automatically scan the
available Wi-Fi and connect to it once enabled Wi-Fi.

Wi-Fi settings: Set up and manage W-Fi access point.

Bluetooth: Check/uncheck to turn on/off Bluetooth to connect the phone with other Bluetooth
devices once enabled Bluetooth.
Bluetooth settings: Set up relative parameters connecting to other devices via Bluetooth.

VPN: Manage VPN.

OpenVPN: Add new VPN configuration files

Proxy settings: Set up proxy server.

Additional Network Settings: Set up Qos and 802.1x mode.

Tethering and portable hotspot: Set up portable Wi-Fi hotspot.
x-P
SOUND
DF
Di
vis
ion

Users could configure the GXV3275 ringtone, plays music and video and speak volume via Sound.

Silent Mode: Check/uncheck to enable/disable silent mode. In the Silent mode, all
applications will be set to mute other than alarm and media.

Volumes: Tap on Volumes and scroll the slider to left/right to adjust the volume for Ringtone ,
Media and Alarm;

Ringtone. Select phone's default ringtone for incoming call;
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
133
GXV3275 LCD SETTINGS
GXV3275 User Manual

Notification tone: Select notification tone for applications like SMS.
DISPLAY
Use Display to configure the screen display parameters like brightness and screen saver.
Brightness: Tap on Brightness and scroll the slider to left/right to adjust the brightness on the
GXV3275 LCD;
ion
Screen timeout: Tap to set the timeout interval before the LCD turns dark form idle screen.
vis
Screen Saver: Set the parameters like screen saver images and interval.
Check the internal storage of the phone.
x-P
STORAGE
DF
Di
Landscape screen: Set all screens landscaped.
APPLICATIONS
Use the Applications to view the running details about the applications installed on the GXV3275, to
manage applications and set permission for the installations. Slide left/right to view the download
application and the size as well as running status of all applications on the phone and in the SD card,
or manage the running applications.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
134
GXV3275 LCD SETTINGS
GXV3275 User Manual
LOCATION ACCESS
Set whether to let app to use Google location service to collect location data.
SECURITY SETTINGS
Set up the security parameters on the phone.

Screen lock. Set up pattern or password for screen lock. Please set up the pattern with the
ion
Wizard.
Owner info. Display owner info on the lock screen.

Display password. The screen will display the input value when users input the password if
vis

check the option. Uncheck not to display the input value when input the password;
Device administrators. Add or delete device administrators.

Unknown sources. Check/uncheck to enable/disable permission to install applications that
DF
Di

Note:
x-P
you obtained from web sites, email, or other locations other than GS Market;
It is recommended to download Apps from the GS market for the security of
user’s data.

Verify apps. Disallow or warn before apps installation that may cause harm.

Trusted credentials. Display trusted certificates or other certificates.

Install from SD card. Install encrypted certificate from SD card.

Clear credentials. Remove all certificates and reset the password.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
135
GXV3275 LCD SETTINGS
GXV3275 User Manual
LANGUAGE &KEYBOARD

Language. Tap to open a list of language options.

Spell checker. Configure whether to check spellings and select the available spell-checker
tool.

Personal dictionary. Add words to user dictionary.

Keyboard & input methods. Set up the default input method.

Android keyboard（AOSP）. Set up whether to use Android keyboard and configure Android
Text-to-speech (TTS) output: Set up TTS.

Moue/trackpad. Set up the point speed.
DF
Di
vis

ion
keyboard.
x-P
ACCOUNTS
Accounts allows users to add Google account, Exchange account and email account. Users could
also make sync settings via Google Play account or associated account on GXV3275.
The steps to add account can be set following the steps in chapter Manage Contacts.
The account can be synchronized with the following procedures once being added successfully:

Google Play. Download Google Play from GS market, open it after the download. Google
Play will automatically login with the added Google account.
Figure 134 GXV3275 Google Play-Add Account
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
136
GXV3275 LCD SETTINGS
GXV3275 User Manual

Contacts. The contact synchronizes with Google account will show in the Contacts. Refer to
the chapter Manage Contacts-Account for details.
DATE &TIME

Enable and Use Specified NTP Server Address. Set the specified NTP server URL or IP
address.
Set date. Set the date on GXV3275 manually if not set auto sync.

Set time. Set the time on GXV3275 manually if not set auto sync.

Select time zone. Set the time zone on GXV3275.

Use 24-hour format. Check/uncheck to display the time using 24-hour time format or not.

Choose date format. Select the Month/Day/Year format.
DF
ABOUT PHONE
Di
vis
ion

x-P
About Phone displays the GXV3275's Account Status, Network Status and System Info.

Account status. Displays the account name and registration status on the GXV3275.

Network status. Displays MAC Address, IP Address info, ect.

System Info. Displays the system version of the GXV3275.
ADVANCED SETTINGS
Users could open Advanced Settings to configure Account Advanced Settings, Upgrade, Syslog&
Factory Reset.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
137
GXV3275 LCD SETTINGS
GXV3275 User Manual

Account. Tap on “Account” and select one account to input the necessary information to
register the account, which includes Account Activation, Account Name, SIP Server, ect.
Save the settings to fulfill registration.
Upgrade. Input the software info to upgrade via firmware server.

Syslog. Select the syslog level and Syslog Server Address.

Factory Reset. Restore the GXV3275 to factory default settings.

Developer mode. Adjust the phone via ADB tool.
vis
ion

DF
x-P
Reboot your phone.
Di
REBOOT
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
138
GXV3275 WEB GUI
GXV3275 User Manual
GXV3275 WEB GUI
DEFINITIONS
ion
This chapter introduces the GXV3275 Web GUI. As mentioned, you can log in as an administrator
vis
or a user.
Status: Displays the Account Status, Network Status, and System Info of the phone;

Account (1-6): To configure each of the SIP accounts. Including General Info, Network
Di

Advanced Settings: General Settings, Call features, Video, Audio, MPK General Settings,
MPK Settings;

x-P

DF
Settings, SIP Settings, Encoding Settings, Call Settings.
Maintenance: Network Settings, Time Settings, Web/SSH Access, Upgrade, Syslog, Logcat,
Debug, webmaster, Contacts, LDAP and Device Manager.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
139
GXV3275 WEB GUI
GXV3275 User Manual
ACCESSING GXV3275 WEB GUI
IP ADDRESS
Di
vis
ion
Users could view the GXV3275 IP Address via Account widget on the As shown in figure 135.
x-P
DF
Figure 135 GXV3275 Desktop Widget-Account
TO ACCESS THE GXV3275 WEB GUI
1.
Connect the computer to the same network as the phone;
2.
Open a Web browser on your computer, enter the phone’s IP address in the address bar of the
browser; for example: http://192.168.124.111;
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
140
GXV3275 WEB GUI
3.
vis
Figure 136 GXV3275 Web GUI-Login
ion
GXV3275 User Manual
Press the “Enter” button and input the administrator’s login and password in the prompt box.
Di
The default login name for the administrator is "admin". The default administrator password is
Select the language being used on Web page in the drop-down menu of the language bar.
Chinese and English are optional.
5.
x-P
4.
DF
set to "admin".
Click “Login” to access the Web GUI.
SAVE CHANGES
When changing any settings, always SUBMIT them by pressing
on the bottom of each
page or press the “Enter” Button, the Web browser will prompt to indicate having saved successfully.
For those options with
next to them, users must reboot the phone for the changes to take
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
141
GXV3275 WEB GUI
GXV3275 User Manual
effect.
CONFIGURE WEB PAGE
GXV3275 WEB page includes Status, Account, Advanced Settings and Maintenance. Users could
login the phone with varied username and the corresponding access permissions are DIFFERENT.
See table 8.
ion
Table 8 Users Access Permissions
User Type
Username
Password
Access Permissions
End-user
user
Custom
Status, some basic settings in the
admin
admin
All Pages
Di
Administrator
vis
Advanced Settings and Maintenance
Administrator
DF
TOOLBAR
x-P
The toolbar is on the upper right corner of the WEB page. As shown in figure 137.
Figure 137 GXV3275 Web GUI-Toolbar

Select the page color

Select the language.

Reboot the phone.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
142
GXV3275 WEB GUI
GXV3275 User Manual
Logout.

STATUS
GXV3275 Status page includes Account Status. Network Status and System Info. Users could click
x-P
DF
Di
vis
ion
the corresponding option on the left navigation bar to enter each subpage. See figure 138.
Figure 138 GXV3275 Web GUI Status-Account Status
Table 9 Status/Account Status Parameters
Parameters
Description
Account
All the 6 SIP accounts on the phone.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
143
GXV3275 WEB GUI
GXV3275 User Manual
The number or extension corresponds to each account.
SIP Server
The SIP server the account registers with
Status
Two registration status for the SIP account: Registered and Unregistered.
Di
vis
ion
Number
DF
Figure 139 GXV3275 Web GUI Status-Network Status
Table 10 Status/Network Status Parameters
Description
MAC Address
GXV3275 MAC address.
Address Type
The configured address type: DHCP, Static IP or PPPoE.
IP Address
IP address of the phone.
Subnet Mask
Subnet mask of the phone.
Default Gateway
Default gateway of the phone.
DNS Server
DNS Server of the phone.
NAT Type
The type of NAT connection used by the phone.
x-P
Parameters
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
144
GXV3275 WEB GUI
vis
ion
GXV3275 User Manual
DF
Di
Figure 140 GXV3275 Web GUI Status-System Info
Table 11 Status/System Info Parameters
Description
Product Model
Product model of the phone.
Hardware Revision
Hardware version number.
Part Number
Product part number.
System Version
Firmware version. This is the main software release version.
Recovery Version
Recovery image version.
Boot Version
Booting code version.
Kernel Version
Kernel version.
x-P
Parameters
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
145
GXV3275 WEB GUI
GXV3275 User Manual
Android Version
Android OS version.
System Up Time
System up time since the last reboot.
ACCOUNT
Users could configure each account on Account page.GXV3275 has six independent SIP accounts that
can be configured on an individual configuration page. Users could select Account X in the menu bar on
WEB GUI to enter the corresponding account configuration page. See figure 141.
ion
The account page has five parts as General Settings, Network Settings, SIP Settings, Codec Settings
vis
and Call Settings. User could click the corresponding option on the navigation bar on the left to configure
x-P
DF
Di
the subpage respectively.
Figure 141 GXV3275 Web GUI Account -General Settings
Table 12 Account/General Settings Parameters
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
146
GXV3275 WEB GUI
GXV3275 User Manual
Account Active
Account Name
SIP Server
SIP User ID
SIP Authentication
Descriptions
This field indicates whether to activate the account. The phone will not send login
message to the SIP server if uncheck this option.
The name associated with each account to be displayed on the LCD.
The URL or IP address of the SIP server. This is provided by your VoIP service
provider (ITSP).
User account information, provided by your VoIP service provider (ITSP). It's usually
in the form of digits similar to phone number or actually a phone number.
SIP service subscriber's Authenticate ID used for authentication. It can be identical to
or different from the SIP User ID.
ion
Parameters
ID
The account password required for the phone to authenticate with the ITSP (SIP)
server before the account can be registered.
Password
This parameter allows you to access voice messages by pressing the MESSAGE
Di
Voice Mail UserID
vis
SIP Authentication
DF
button or Dial the Access Number button on the phone.
Name
The SIP server subscriber's name (this function should be supported by SIP server)
Tel URI
x-P
that will be used for Caller ID display.
The default is “Disabled”. If the phone has an assigned PSTN telephone number, this
field should be set to "Enabled", or should be set to “Disabled”. If set to "Enable",
Then a "User=Phone" parameter will be attached to the Request-Line and "TO"
header in the SIP request.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
147
GXV3275 WEB GUI
vis
ion
GXV3275 User Manual
Figure 142 GXV3275 Web GUI Account-Network Settings
Outbound Proxy
Description
DF
Parameters
Di
Table 13 Account/Network Settings Parameters
IP address or URL of the Outbound Proxy, Media Gateway, or Session Border
Controller. It's used by the phone for Firewall or NAT penetration in different network
x-P
environments. If a symmetric NAT is detected, STUN will not work and ONLY an
Outbound Proxy can provide a solution.
Secondary
IP address or URL of the Secondary Outbound Proxy.
Outbound Proxy
DNS Mode
This parameter controls how the Search Appliance looks up IP addresses for
hostnames. There are three modes: A Record, SRV, NATPTR/SRV. The default
setting is "A Record". If the user wishes to locate the server by DNS SRV, the user
may select "SRV" or "NATPTR/SRV".
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
148
GXV3275 WEB GUI
GXV3275 User Manual
NAT Traversal
This parameter configures whether the NAT traversal mechanism is activated.
If set to "STUN" and STUN server is configured, the phone will route according to the
STUN server. If NAT type is Full Cone, Restricted Cone or Port-Restricted Cone, the
phone will try to use public IP addresses and port number in all the SIP&SDP
messages.
The phone will send empty SDP packet to the SIP server periodically to keep the
NAT port open if it is configured to be "Keep-alive". Configure this to be “NO" if an
outbound proxy is used. "STUN" cannot be used if the detected NAT is symmetric
NAT.
Set this to "VPN" if OpenVPN is used.
A SIP Extension to notify the SIP server that the phone is behind a NAT/Firewall.
x-P
DF
Di
vis
ion
Proxy-Require
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
149
GXV3275 WEB GUI
x-P
DF
Di
vis
ion
GXV3275 User Manual
Figure 143 GXV3275 Web GUI Account-SIP Settings
Table 14 Account/SIP Settings Parameters
Parameters
Description
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
150
GXV3275 WEB GUI
GXV3275 User Manual
The default setting is "Yes”. Selects whether or not the phone will send SIP Register
SIP Registration
messages to the proxy/server. If set to "No”, the phone will not send SIP Register
messages to the proxy/server.
Unregister
Before
New Registration
Register Expiration
If set to "Yes", the SIP user's registration information will be cleared when the phone
reboots. The SIP Contact header will contain "*" to notify the server to unbind the
connection. The default setting is "No".
Specifies the frequency (in minutes) in which the phone refreshes its registration with
the specified registrar. The default value is 60 minutes (1 hour). The maximum value
is 64800 minutes (about 45 days). The minimum value is 1 minute.
(m)
Wait Time Retry
The default value is 20 seconds. The amount of time in which the phone will retry the
registration process in the event that is failed.
ion
Registration (s)
SUBSCRIBE
for
The default setting is "No". When set to "Yes", a SUBSCRIBE for Message Waiting
Indication will be sent periodically.
Di
MWI
Session Expiration is the time (in seconds) where the session is considered timed
out, provided no successful session refresh transaction occurs beforehand. The
default value is 180 seconds.
(s)
DF
Session Expiration
vis
Defines the local SIP port used to listen and transmit.
Local SIP Port
x-P
The SIP Session Timer extension that enables SIP sessions to be periodically
"refreshed" via a SIP request (UPDATE, or re-INVITE). If there is no refresh via an
UPDATE or re-INVITE message, the session will be terminated once the session
interval expires.
Min-SE (s)
UAC
The minimum session expiration (in seconds). The default value is 90 seconds.
Specify
As a Caller, select UAC to use the phone as the refresher; or select UAS to use the
Callee or proxy server as the refresher.
Refresher
UAS
Specify
As a Callee, select UAC to use caller or proxy server as the refresher; or select UAS
to use the phone as the refresher.
Refresher
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
151
GXV3275 WEB GUI
GXV3275 User Manual
The Session Timer can be refreshed using the INVITE method or the UPDATE
Force INVITE
Caller
method. Select "Yes" to use the INVITE method to refresh the session timer.
Request
If set to "Yes" and the remote party supports session timers, the phone will use a
session timer when it makes outbound calls.
Timer
Callee
Request
If set to "Yes" and the remote party supports session timers, the phone will use a
session timer when it receives inbound calls.
Timer
If Force Timer is set to "Yes", the phone will use the session timer even if the remote
Force Timer
party does not support this feature. If Force Timer is set to "No", the phone will enable
the session timer only when the remote party supports this feature.
ion
To turn off the session timer, set caller Request Timer, callee Request Timer and
Force Timer all to "No".
The use of the PRACK (Provisional Acknowledgment) method enables reliability to
vis
Enable 100rel
SIP provisional responses (1xx series). This is very important in order to support
PSTN internetworking. To invoke a reliable provisional response, the 100rel tag is
Privacy
Defines whether or not the Privacy header will be in the SIP INVITE message. The
default setting is “default”.
x-P
Header
DF
Use
Di
appended to the value of the required header of the initial signaling messages.
Defines whether or not the P-Preferred-Identity header will be in the SIP INVITE
Use
message. The default setting is “default”.
P-Preferred-Identit
y Header
Determines the network protocol used for the SIP transport. Users can choose from
SIP Transport
UDP / TCP /TLS. The default setting is “UDP”.
Symmetric RTP
Support
SIP
Defines whether symmetric RTP is supported or not.
Defines whether SIP Instance ID is supported or not. The default setting is "Yes".
Instance ID
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
152
GXV3275 WEB GUI
GXV3275 User Manual
Validate Incoming
Defines whether the incoming SIP messages will be validated or not.
SIP Messages
Validate Incoming
If set to "Yes", the phone will response to SIP 401 Unauthorized to validate the
incoming INVITE message. The default setting is "No".
INVITE Session
SIP T1 Timeout
The default setting is 0.5 seconds. SIP T1 Timeout is the RTT (Round-Trip Time)
evaluation between the server and client. If the wait time is long, please choose a
larger value in order to guarantee the stability.
SIP T2 interval
The default setting is 4 seconds. This option configures the SIP Protocol T2 Timer (In
Seconds). T2 Timer determines the time interval of INVITE Response and
The default setting is "No". This is used for the SIP Extension to notify the SIP server
that the device is behind a NAT/Firewall.
vis
Remove OBP from
route
If set to”Yes”, SCA (Broadsoft standard) will be used as the register account. The
Di
Enable SCA
default setting is "No".
setting is "No".
If set to” Yes”, call park will be automatically filled in. The default setting is "No".
Feature Code
Pickup
Feature
DF
Auto-filling Pickup
If set to”Yes”, users could barge the current call on the shared line. The default
x-P
Enable BargeIn
ion
non-INVITE Request.
Configure pickup service code for call park
Code
Line-seize Timeout
Configure the timeout (in seconds).The default setting is "15 seconds".
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
153
GXV3275 WEB GUI
DF
Di
vis
ion
GXV3275 User Manual
x-P
Figure 144 GXV3275 Web GUI Account- Codec Settings
Table 15 Account/Codec Settings Parameters
Parameters
Description
DTMF
This parameter specifies the mechanism to transmit DTMF digits. There are 3
supported modes:
In audio: DTMF is combined in the audio signal (not very reliable with low-bit-rate
codecs),
Via RTP (RFC2833). DTMF signal with identified RTP packets, it can be learnt that
the package in the RTP packet header is DTMF packet and the type of DTMF signal.
Via SIP INFO. Use INFO message of SIP signaling to carry DTMF signal. The main
deficiency is DTMF signal and media package may not synchronized due to the
separate transition of SIP control signaling and Real Time Protocol (RTP).
The default is RFC2833.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
154
GXV3275 WEB GUI
GXV3275 User Manual
DTMF
Payload
Species the DTMF payload type using RFC2833. The default is 101.
Type
Preferred Vocoder
45 different vocoder types are supported on the phone, including G.711 A-law
(PCMA), G.711 U-law (PCMU), G.722, G.726-32and iLBC.
Users can configure vocoders in a preference list that is included with the same
preference order in SDP message.
Support RFC5168
If set to “Yes”, the video call would support RFC5168. The default setting is "No".
H.264 Image Size
Supports 720P、4CIF、VGA 、CIF、 QVGA、 QCIF.
Video Bite Rate
Configure the bite rate for video call. The default setting is "2048kbps ".
SDP Bandwidth
Standard, Media Level, Session Level, No
H.264
ion
Attribute
Payload
Input H.264Payload value. The range is 96-127. The default setting is 99.
SRTP
The default setting is "Disable". Users could choose force SRTP execution or
phone will send a small quantity of VDA packets other than the voice packets when
no voice stream detected during a call. The default setting is "No".
x-P
suppression
Controls the Silence suppression/ Voice activity detection（VAD）.If set to “Yes”, the
DF
Silence
Di
execute SRTP with negotiation mode.
vis
Type
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
155
GXV3275 WEB GUI
GXV3275 User Manual
Voice Frames Per
Configures the number of voice frames transmitted per packet.( The maximum value
of IS limit that based on Ethernet packets is recommended to be 1500 bytes or
120Kbit/s)
TX
When configuring this, it should be noted that the "ptime" value for the SDP will
change with different configurations here. This value is related to the codec used and
the actual frames transmitted during the in payload call.
i.e., If set the first code to G. 723 and “voice frame/TX" to 2, for the reason G. 723
voice frame includes 30 milliseconds of audio,
the "ptime" value is 60 milliseconds
in the SDP packet of INVITE request. Similarly if set the first code to G. 729/ G. 711/
G. 726 and “voice frame/TX" to 2, then the "ptime" value is 20 milliseconds.
If the "Speech frame/TX” exceeds its the maximum value, the phone will save the
PCM maximum value: 10 frame (x10 milliseconds) ;
ion
maximum value to correspond with the choice of the first coding.
G.726 maximum value: 20 frame (x10 milliseconds) ;
vis
G.723 maximum value: 32 frame (x10 milliseconds) ;
G.729 maximum value: 64 frame (x10 milliseconds) ;
Adjust the above parameters will also change the dynamic jitter buffer. The phone
Di
has a dynamic jitter buffer processing algorithm. The jitter buffer scope is 20 to 200
milliseconds.
influence the audio quality.
Jitter Buffer Length
Selects either Fixed or Adaptive based on network conditions. The default setting is
"Adaptive".
x-P
Jitter Buffer Type
DF
For end users, it is recommended to use the default setting, as incorrect settings may
The default setting is "Medium". Selects Low, Medium, or High based on network
conditions.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
156
GXV3275 WEB GUI
x-P
DF
Di
vis
ion
GXV3275 User Manual
Figure 145 GXV3275 Web GUI Account – Call Settings
Table 16 Account/Call Settings Parameters
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
157
GXV3275 WEB GUI
GXV3275 User Manual
Parameters
Start
Description
Video
Automatically
Remote
Press the Conference button will automatically connect the active line to the
conference.
Video
Configure video request type. Three options are available: Prompt, Accept, deny.
Request
The default setting is “Prompt”.
Dial Plan Prefix
Set dial prefix. Any numbers dialed with this account will automatically add this
prefix
Dial Plan Rules:
Dial Plan
1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 , *, #;
2. Grammar:
ion
x - any digit from 0-9;
xx - at least 2 digit numbers from 0-9;
vis
^ - exclude
[3-5] - any digit of 3, 4, or 5
[147] - any digit of 1, 4, or 7
Di
<2=011> -when the digit is 2, it will be replaced with 011
3. Example:
DF
Set to {x+} allows dial out with all digits.
code
x-P
{[369]11 | 1617xxxxxxx} –- allows dialing numbers 311, 611 and 911 and 1617 area
{^1900x+ | <=1617>xxxxxxx} –prevents dialing any number started with 1900 and
1617 area code will be added automatically when dialing number with 7 digits length;
Refer-To
Use
The default setting is "No". If set to "Yes" and the server support this function, the
Target Contact
phone will use the "Refer-To" header for attended transfer.
Auto Answer
The default setting is "No". If set to "Yes", the phone will automatically turn on the
speaker phone to answer incoming calls.
Send Anonymous
If set to "Yes", the "From" header in outgoing INVITE messages will be set to
anonymous, essentially blocking the Caller ID to be displayed.
Anonymous
Call
The default setting is "No”. If set to "Yes", anonymous calls will be rejected.
Rejection
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
158
GXV3275 WEB GUI
GXV3275 User Manual
Three options. The default is “log all calls”.
Call Log
Special Feature

log all calls: Log all calls;

Only log incoming/outgoing calls: Disable Missed calls record.

Disable call log: Disable call record.
The default setting is "Standard". Users may need to select special features to meet
the specific requirements of different soft switch vendors.
Feature
Key
Call features can be synchronized with SIP server.
Synchronization
Enable
Call
The default settings is "no". The local supports call transfer, call waiting and call
forwarding.
Features
i.e.: * 72 + number means sets unconditional transfer number via call function.
ion
When the local call function conflicts with the server, local call function can be shut
down.
No
Key
Entry
vis
Please refer to chapter Activate Call Features for more details.
Defines the timeout (in seconds) for no key entry. If no key is pressed after the
timeout, the digits will be sent out. The default value is 4 seconds.
Ring Timeout (s)
Defines the timeout (in seconds) for the rings on no answer. The default setting is 60
Use # as Dial Key
DF
seconds.
Di
Timeout (s)
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#" key will
immediately dial out the input digits. In this case, this key is essentially equivalent to
x-P
the "Send" key. If set to "No", the "#" key is included as part of the dialing string.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
159
GXV3275 WEB GUI
GXV3275 User Manual
Defines whether the call will be transferred once the conference host hangs up the
3-Party
Conference
host
phone. If check, the other two parties will still on line if the host hangs up.The default
transfer the call
is uncheck.
Conference URI
Configure Conference URI（Broadsoft Standard）according to N-way conference
Broadsoft
Enable Broadsoft Call Center. The default setting is “No”.
Call
Center
Hoteling Event
Enable Broadsoft event function. The default setting is “No”. Enable Broadsoft Call
Center to make this take into effect.
Call Center Status
Enable Broadsoft Call Center Status. The default setting is “No”. Enable Broadsoft
Call Center to make this take into effect.
Allows users to configure different ringtone for the account.

ion
Account Ring Tone
One System Ring Tone：Once selected, all calls will ring the System Ring
Tone.
Multiple Customer Ring Tone：Once selected, all calls corresponds to the
vis

specified account will ring the Customer Ring Tone. Users could also upload
the mp3 files as the ringtones.
Set Call Forward function.
Di
Call Forward
Match
Incoming

None: Disable Call Forward

Unconditional: Forward all calls to particular number

Time based: Forward calls based on the time range.

Others: when phone is busy or not answered.
x-P
Call Forward Type
DF
Specifies the Call Forward Type in the drop-down menu:
This option defines the corresponding incoming ringtone. Users can choose different
Caller ID
ringtones.
Custom Ringtone
This option defines the corresponding incoming ringtone. Users can choose different
ringtones.
Upload Local MOH
Click the "Browse" button to upload the audio file from PC. MOH audio file must
Audio File
be in.Wav or.Mp3 format.
Warning: It may take a long time to upload MP3 format file, please wait patiently.
The button will display as "processing" in the file uploading process, when
finished uploading the button will change back to "browse".
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
160
GXV3275 WEB GUI
GXV3275 User Manual
Enable Local MOH
If set to “Yes”, the local MOH will be enabled. Users should upload the local MOH
audio file. Users could play this MOH audio file while holding the call once enabled
this function. The default setting is “No”.
ADVANCED SETTINGS
Users could set Security, Call Features, and Audio on the Advanced Settings page. Select
Advanced Settings in the menu bar on WEB GUI. See figure 146.
The account page has six parts as General Settings, Call Features, Video settings, Tone Generator,
ion
MPK General Settings, MPK LCD Settings. User could click the corresponding option on the
x-P
DF
Di
vis
navigation bar on the left to configure respectively.
Figure 146 GXV3275 Web GUI-Advanced Settings
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
161
GXV3275 WEB GUI
GXV3275 User Manual
Table 17 Advanced Settings/General Settings Parameters
Parameters
Description
Local RTP Port
Defines the local RTP-RTCP port pair used to listen and transmit. It is the base RTP
port for channel 0.
Users should configure 2 ports for one RTPdialogue: one for RTP and the other for
RTCP.
When configured, channel 0 will use this port_value for RTP and the port_value+1 for
its RTCP; channel 1 will use port_value+2 for RTP and port_value+4 for RTCP. The
default value is 5004.
Use Random Port
When set to "Yes", this parameter will force random generation of both the local SIP
and RTP ports. This is usually necessary when multiple phones are behind the same
Disable
in-call
ion
full cone NAT. The Default setting is "Yes".
Disable in-call DTMF.
Specifies how often the phone sends a blank UDP packet to the SIP server in order
to keep the port on the NAT router to open. The default setting is 20 seconds.
Di
Keep-alive Interval
vis
DTMF display
STUN Server
The IP address or Domain name of the STUN server to solve NAT Traversal.
settings.
SIP TLS Certificate
TLS
Private
TLS
Private
x-P
The NAT IP address used in SIP/SDP messages. This field is blank at the default
Use NAT IP
SIP
DF
(s)
GXV3275 supports SIP over TLS via the built-in private key and SSL certificate. The
custom SSL certificate used for SIP over TLS should be in X.509 format.
Users could custom SSL private key. The custom SSL Private key used for SIP over
TLS should be in X.509 format.
Key
SIP
Defines the SSL Private key password used for SIP over TLS.
Key Password
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
162
GXV3275 WEB GUI
Di
vis
ion
GXV3275 User Manual
DF
Figure 147 GXV3275 Web GUI Advanced Settings-Call Features
Parameters
Always
Description
Ring
x-P
Table 18 Advanced Settings/Call Features Parameters
If set to “Yes”, the incoming call will ring through speakers when using headphones.
speaker
The default is "No".
Auto Conference
If set to “Yes”, when during an active or more calls, users could press the Conference
icon to join all the current lines on the phone. The default setting is "No".
Disable
The default setting is "No". If set to “Yes”, disables the call waiting on the third party
when two table telephone set up calls.
Call-Waiting
Disable Dialplan
If set to "Yes", disables dialing plans. The default setting is "No".
Disable
The default setting is "No". If set to "Yes”, disable the call waiting tone when call
Call-Waiting Tone
waiting is on.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
163
GXV3275 WEB GUI
GXV3275 User Manual
Disable
DND
The default setting is "No". If set to "Yes", the ring splash that indicates an incoming
Reminder Ring
call when DND is enabled will not be played.
Disable
The default setting is "No". If set to "Yes", the phone cannot make IP calls via IP-Call
IP-Call
mode
mode.
Use Quick IP-Call
Users can dial an IP address under the same LAN/VPN segment by entering the last
mode
octet in the IP address.It is recommended that enable this mode when using the
restricted static IP.
Go to Settings>Advanced Settings page, set “Fast IP Dial Mode”to “Yes”, dial #XXX
(X is 0-9 and XXX <=255), phone will make direct IP call to aaa.bbb.ccc.XXX where
aaa.bbb.ccc comes from the local IP address REGARDLESS of subnet mask.
Conference
Disable Transfer
The default setting is "No". If set to "Yes", the “TRANSFER” function key will be
Transfer
vis
disabled. All Transfer operations will be failed.
Default
Blind transfer and attended transfer is optional.
Offhook Auto Dial
The default setting is "Yes". Replaces “#” by “%23” for some special situations.
DF
in SIP URI
Di
Mode
Escape # as %23
ion
The default setting is "No". If set to "Yes", the Conference function will be disabled.
Disable
The phone will only use the first account to dial out. Once enabled, only one
extension could realize this function while others can’t. The phone will dial
Offhook Timeout(s)
x-P
automatically the number when the phone is offhook or press the hands-free button.
The phone will exit the dial-up interface when offhook timeout. The default is "30
seconds ".
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
164
GXV3275 WEB GUI
vis
ion
GXV3275 User Manual
Figure 148 GXV3275 Web GUI Advanced Settings-Video Settings
Second”.
DF
Configure the frame rate for SIP video call. The default setting is “15 Frames/
x-P
Frame Rate
Di
Table 19 Advanced Settings/Video Settings Parameters
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
165
GXV3275 WEB GUI
Di
vis
ion
GXV3275 User Manual
Figure 149 GXV3275 Web GUI Advanced Settings-Tone Generator
Call
Progress
Tones
Description
x-P
Parameters
DF
Table 20 Advanced Settings- Tone Generator Parameters
Users can configure ring or tone frequencies based on parameters from the local
telecom provider. By default, they are set to the North American standard.
Frequencies should be configured with known values to avoid uncomfortable high
pitch sounds. ON is the period of ringing (“On time” in ‘ms’) while OFF is the period of
silence. In order to set a continuous ring, OFF should be zero. Otherwise it will ring
ONms and a pause of OFFms and then repeat the pattern. Up to three cadences are
supported.
Ring Back Tone
This defines the ring cadence for the phone. The default setting is: c=2000/4000.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
166
GXV3275 WEB GUI
x-P
DF
Di
vis
ion
GXV3275 User Manual
Figure 150 GXV3275 Web GUI Advanced Settings-MPK General Settings
Table 21 Advanced Settings/ MPK General Settings Parameters
BLF
Call-pickup
The prefix when the phone using MPK to call up. Each account is set to “**”by
default.
Prefix
The Event List URI in MPK list, it requires server support. Users should firstly
Event List URI
configure a Event List URI including expanded list on the server (i.e.:
BLF1006@myserver.com) and fill in URI without a domain name (i.e.：BLF1006).
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
167
GXV3275 WEB GUI
Di
vis
ion
GXV3275 User Manual
DF
Figure 151 GXV3275 Web GUI Advanced Settings- MPK LCD Settings
Table 22 Advanced Settings/ MPK LCD Settings Parameters
x-P
Configure MPK key mode on the GXV3275 extension board

Speed Dial: Dial the uesr ID on the extension board.

BLF: Monitor the call ID status on the extension board.

Call Transfer: Transfer the current active call to the user ID on the
extension board.
Key Mode

Call Intercom: Paging/Intercom User ID on the expansion board.

Speed Dial via Active: Similar to Speed Dial. The difference is to call via
the activated account. i.e., if account 2 is activated when offhook, the
phone will call the user ID on the extension board via account 2.
MPK List
Account

Dial DTMF: Dial DTMF of user ID on the extension board in an active call.

Call Park: Configure call park code when park or answering the call.
The configured MPK will be displayed in MOK list. Users cold user up/down button
or more buttons to move, edit and delete the members in the list.
Configure the SIP account MPK key uses.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
168
GXV3275 WEB GUI
GXV3275 User Manual
Name
Configure the name of the corresponding MPK key
User ID
Configure the user ID of the corresponding MPK key
Display Format
Display MPK format: User name, User ID, User ID(User Name)
Show Display
Name from Server
MAINTENANCE
ion
Users could configure the Upgrade, TR-069 and Time &Date on GXV3275. Select Maintenance in
x-P
DF
Di
vis
the WEB GUI menu bar to enter the maintenance page. See figure 152.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
169
GXV3275 WEB GUI
x-P
DF
Di
vis
ion
GXV3275 User Manual
Figure 152 GXV3275 Web GUI-Maintenance
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
170
GXV3275 WEB GUI
GXV3275 User Manual
Table 23 Maintenance/Network Settings Parameters
Parameters
Specifications
Address Type
Allows users to obtain IP address via the following modes

DHCP: Obtain IP address form DHCP server automatically.

PPPoE: Dial up via PPPoE.

Static IP: Static IP address configured by administrator.
DNS Server 1
Enter the DNS Server 1.
DNS Server 2
Enter the DNS Server 2.
ion
Enable LLDP
Defines the Layer 3 QoS parameter for SIP packets. This value is used for IP
SIP
Precedence, Diff-Serv or MPLS.
Layer 3 QoS for
Defines the Layer 3 QoS parameter for Audio packets. This value is used for IP
Audio
Precedence, Diff-Serv or MPLS.
Layer 3 QoS for
Defines the Layer 3 QoS parameter for Video packets. This value is used for IP
Video
Precedence, Diff-Serv or MPLS.
QoS
Di
802.1Q/VLAN Tag
Assigns the VLAN Tag of the Layer 2 QoS packets. The default value is 0.
DF
Layer
vis
Layer 3 QoS for
NOTE: If the Layer 2 is uncertain, please don’t modify the Layer 2 tag and priority.
Layer
802.1p
QoS
Priority
x-P
Wrong configuration may cause IP access failure on the phone.
Assigns the priority value of the Layer2 QoS packets. The Default value is 0.
Value
802.1x mode
Procy
Allows the user to enable 802.1 x modes on the phone.
Connect to the proxy server.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
171
GXV3275 WEB GUI
vis
ion
GXV3275 User Manual
Di
Figure 153 GXV3275 Web GUI Maintenance-Time Settings
Assigned
Specification
NTP
Defines the URL or IP address of the specified NTP server to synchronize the date
and time with NTP server.
x-P
Parameters
Server Address
DHCP Option 42
override
NTP
DF
Table 24 Maintenance-Time Settings Parameters
Defines whether DHCP Option 42 should override NTP server or not. When enabled,
DHCP Option 42 will override the NTP server to synchronize the date and time on the
phone. The default setting is "Yes".
server
DHCP Option 2 to
override
Allows device to get provisioned for Time Zone from DHCP Option 2 in the local
server automatically. The default setting is "No".
Time
Zone setting
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
172
GXV3275 WEB GUI
GXV3275 User Manual
Controls the date/time display according to the specified time zone. If DHCP Option2
Time Zone
is enabled, the DHCP server will skip this setup to control the time zone configuration
on the phone directly.
Time
Display
Configures the time display format on the LCD.
Display
Configures the date display format on the LCD.
Format
Date
x-P
DF
Di
vis
ion
Format
Figure 154 GXV3275 Web GUI Maintenance-Web/SSH Access
Table 25 Maintenance/ Web/SSH Access Parameters
Parameter
Disable SSH
Description
The default setting is “No”. If set to “Yes”, the phone will not allow any SSH access to
the phone.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
173
GXV3275 WEB GUI
GXV3275 User Manual
Access Method
Allows users to select HTTP or HTTPS for Web Access.
This field is for customizing the port for Web Access via HTTP. By default, HTTP
Port
uses port 80 and HTTPS uses port 443.
Admin Password
Allows users to change the admin password. Only the administrator could configure
the Advanced Configuration page. This field is case sensitive with a maximum length
of 32 characters.
User Password
Allows the administrator to set the password for user-level GUI access. This field is
x-P
DF
Di
vis
ion
case sensitive with a maximum length of 32 characters.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
174
GXV3275 WEB GUI
x-P
DF
Di
vis
ion
GXV3275 User Manual
Figure 155 GXV3275 Web GUI Maintenance-Upgrade
Table 26 Maintenance/Upgrade Parameters
Parameters
Configuration
Description
via
Set LCD menu configuration permission. No Limited or General Settings is optional.
LCD Menu
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
175
GXV3275 WEB GUI
GXV3275 User Manual
XML
Config
File
The password for encrypting the XML configuration file using OpenSSL. This is
Password
required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
Input the authenticated user name if HTTP/HTTPS or configured server adopts User
Name
authentication mode.
HTTP/HTTPS
Input the authenticated user password if HTTP/HTTPS or configured server adopts
Password
User authentication mode.
Upgrade Via
Allows users to choose the firmware upgrade method: TFTP, HTTP, HTTPS or
manual upload.
Server
Path
Configure
Server
Path
Firmware
File
Prefix
Defines the IP address or domain name for the firmware upgrade server.
Defines the IP address or domain name for the file server.
ion
Firmware
The default setting is “Empty”. If configured, only the firmware with the matching
vis
encrypted prefix will be downloaded and flashed into the phone. This option appeals
to service provider. End users don't need to fill in this option.
Firmware
File
The default setting is “Empty”. End users don't need to fill in this option.
File
The default setting is “Empty”. End users don't need to fill in this option.
File
The default setting is “Empty”. End users don't need to fill in this option.
DF
Configure
Di
Postfix
Configure
Postfix
mDNS Server
x-P
Prefix
If set to “Yes”, the device allows mDNS to rewrite configure/firmware server. The
default setting is “Yes”.
DHCP Option 66
The default setting is “No”. If set to “Yes”, the device will obtain IP address as well as
Override Server
firmware upgrade server address via DHCP(configured via DHCP). The address will
override the path the “Firmware Server Path” specifies to fulfill auto deployment. The
upgrade will use force TFTP.
DHCP Option 120
Override
SIP
Enables DHCP Option 120 from local server to override the SIP Server on the phone.
Server
3CX
Auto
Provision
Enables automatic provision feature on the phone when 3CX is used as the SIP
server.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
176
GXV3275 WEB GUI
GXV3275 User Manual
Automatic Upgrade
This function is set for the network service provider. The default setting is "No".
If set the checking time for every week/day/intervals, the Auto Upgrade and the
corresponding configurations will be enabled. Input the period time for checking
software upgrade or configuring upgrade in the textbox. The shortest interval is 60
minutes.
If set to “No”, the device only to upgrade when reboot.
Period
Time
of
Specifies the time period to check for firmware upgrade (in minutes). The default
setting is 10080 minutes (7 days).
Hour of the Day
Defines the hour of the day（0-23） to check the HTTP/TFTP server for firmware
(0-23)
upgrades or configuration files changes.
Day of the Week
Defines the day of the week（0-6） to check the HTTP/TFTP server for firmware
(0-6)
upgrades or configuration files changes.
Automatic Upgrade
Defines the rules for automatic upgrade.
ion
Upgrade Checking
Rule
If set to “Yes”, the device will reboot automativally for upgrade after downloading the
Authenticate Conf
If set to “Yes”, Authenticates configuration file before acceptance.
vis
Automatic Reboot
for
Upgrade
without
confirm
boxes
upgrade firmware. Otherwise the prompt for reboot will pop up on LCD before reboot.
Di
The default setting is “Yes”.
Factory Reset
DF
File
Restore to factory default settings.
Restore mode: Reset all data, Reset VoIP data, Reset user data. Press the Reset
x-P
button after selecting the reset mode.
Note: Please back up data before reset in order to avoid data loss.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
177
GXV3275 WEB GUI
vis
ion
GXV3275 User Manual
Figure 156 GXV3275 Web GUI Maintenance-Syslog
The URL/IP address for the syslog server. This function appeals to the VOiP service
server.
x-P
Syslog Server
Description
DF
Parameters
Di
Table 27 Maintenance/Syslog Parameters
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
178
GXV3275 WEB GUI
GXV3275 User Manual
Syslog Level
Selects the level of logging for syslog. The default setting is None. It means send no
syslog.
The 4 levels from high to low are: DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
product model/version on boot up (INFO level);
NAT related info (INFO level);

sent or received SIP message (DEBUG level);

SIP message summary (INFO level);

inbound and outbound calls (INFO level);

registration status change (INFO level);

negotiated codec (INFO level);

ethernet link up (INFO level);

SLIC chip exception (WARNING and ERROR levels);

Memory exception (ERROR level).
x-P
DF
Di
vis
ion

Figure 157 GXV3275 Web GUI Maintenance-Logcat
Table 28 Maintenance/Logcat Parameters
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
179
GXV3275 WEB GUI
GXV3275 User Manual
Description
Clear Log
Press the clear log button to clear log.
Log Tag
Specifies the log tag to filter the log.
Log Level
Selects the log priority in the drop-down menu.
x-P
DF
Di
vis
ion
Parameters
Figure 158 GXV3275 Web GUI Maintenance –Debug
Table 29 Maintenance/Debug Parameters
Parameters
Capture Trace
Description
Press Start to start capturing a trace and press Stop to discontinue .Capture Trace
will help to diagnosis. The default is disabled.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
180
GXV3275 WEB GUI
GXV3275 User Manual
Press LIST to view the list of captured traces. It will show the time when the trace was
captured. Click on the name of the file to download and view the trace.
DF
Di
vis
ion
View Trace
x-P
Figure 159 GXV3275 Web GUI Maintenance-Language
Table 30 Maintenance-Language Parameters
Parameters
Language
Description
Select the language displayed on the phone. GXV3275 supports multi language:
Chinese, English, Spanish, French, Russian and etc.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
181
GXV3275 WEB GUI
DF
Di
vis
ion
GXV3275 User Manual
Figure 160 GXV3275 Web GUI Maintenance-TR-069
x-P
Table 31Maintenance/TR-069 Parameters
Parameters
Description
Enable TR-069
If set to "Yes", the phone will send session connection request to the ACS.
ACS URL
URL for TR-069 Auto Configuration Servers (ACS). There are 2 methods toidentify
ASC server:
IP Address
i.e: http://10.10.10.1:9090
Domain Name
i.e:http://huawei.acs.com:9090
NOTE: 9090 is the port number of ASC server
ACS username
ACS username to authenticate TR-069 when the phone sends connecting request to
ASC. It should be in accordance with ASC configuration.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
182
GXV3275 WEB GUI
GXV3275 User Manual
ACS password
ACS password for TR-069. It should be in associated with ASC configuration.
Periodic
Inform
If set to "Yes", the phone will send inform packets to the ACS periodically.
Inform
Sets up the periodic inform interval (in seconds) to send the inform packets to the
Enable
Periodic
Interval (s)
ACS.
Connection
The username to authenticate ACS when the ASC server sends connecting request
Request
to the phone. It should be in associated with ASC configuration.
Username
The password for the ACS to connect to the phone. The phone should in accordance
Request Password
with ACS server configuration.
Connection
The port for the ACS to connect to the phone. It cannot be occupied by other
Request Port
applications, i.e: the device can’t use the port that SIP 5060 or 5004 uses.
CPE Cert File
The Cert File for the phone to connect to the ACS via SSL.
CPE Cert Key
The Cert Key for the phone to connect to the ACS via SSL.
x-P
DF
Di
vis
ion
Connection
Figure 161 GXV3275 Web GUI Maintenance-Contacts
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
183
GXV3275 WEB GUI
GXV3275 User Manual
Table 32 Maintenance/Contacts Parameters
Parameters
Description
Import/Export
Supports import/export Contacts: UTF-8，GBK，UTF-16，UTF-32，Big5，
File Encoding
Big5-HKSCS
，
Shift-JIS
，
IOS8859-1
，
IOS8859-15
，
Windows-1251,EUC-KR.
Supports import/export Contacts: XML，VCard，CSV.
Save Phonebook to PC
Clear The Old List
Replace Duplicate Items
Local File
Allow users to save XML file to PC.Click Save to save the pop-up XML
file to PC.
The phone will delete all the old list before downloading new ones if
check. The default is uncheck.
The phone will delete all the duplicated items before downloading new
ones if check. The default is uncheck.
ion
File Type
Click Browse to select XML file and download it to the phone.
Download Mode
ones if check. The default is uncheck.
Di
Replace Duplicate Items
The phone will delete all the duplicated items before downloading new
The phone will delete all the duplicated items before downloading new
ones if check. The default is uncheck.
DF
Clear The Old List
vis
Download
Select network download mode: OFF/TFTP/HTTP.
Supports import/export Contacts: UTF-8，GBK，UTF-16，UTF-32，Big5，
Big5-HKSCS，Shift-JIS，IOS8859-1，IOS8859-15，
x-P
File Encoding
Windows-1251,EUC-KR. The default is UTF-8.
Download Server
Set up the server to download with from network.
Click Download to download Contacts file to the phone from the
Download Now
configured server.
Note: The contacts file must be the formatted file the phone supports.
Download Interval
The interval to download from server. The default is None, namely will
not automatically request download, users can set up as needed.
Note: Please download phonebook for more GXV3275 xml info; refer to GXV3275 xml
Contacts Guide for details.
http://www.grandstream.com/products/gxp_series/gxV3275/documents/gxV3275_xml_phone
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
184
批注 [J1]: 缺少其他文件编码
GXV3275 WEB GUI
GXV3275 User Manual
x-P
DF
Di
vis
ion
book_guide.pdf
Figure 162 GXV3275 Web GUI Maintenance-LDAP Book
Table 33 Maintenance/LDAP Book Parameters
Parameters
Descriptions
Server Address
LDAP server address, users could input IP address or domain name.
Port
Set up the port number of LDAP server.
Set up the base DN to inquire on the serve ,namely under which
Base DN
directory to inquire contacts.i.e., dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
User Name
Set up the username to login LDAP server. Some LDAP servers
support anonymous login without username.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
185
GXV3275 WEB GUI
GXV3275 User Manual
Password
Set up the password to login LDAP server. If the LDAP server
support anonymous, users could login without password.
Set up the name attribute of each record returned from LDAP search.
LDAP Name Attributes
It allows users to configure multiple name attribute separated by
spaces. i.e., gn cn sn description。
Set up the number attribute of each record returned from LDAP
search. It allows users to configure multiple number attribute
LDAP Number Attributes
separated by spaces. i.e.,
telephoneNumber
telephoneNumber Mobile。
Set up the mail attribute of each record returned from LDAP search.
It allows users to configure multiple mail attribute separated by
spaces. i.e.,
ion
LDAP Mail Attributes
mail
mail mailbox。
vis
Set up the filter when configure name inquiry.i.e.,
(|(telephoneNumber=%)(Mobile=%) return all “telephoneNumber” or
LDAP Name Filter
contacts with specified filter value in “Mobile” f.
Di
(&(telephoneNumber=%) (cn=*)) return all contacts with specified
filter value with “cn“ field in “telephoneNumber”.
DF
Set up the filter when configure number inquiry.i.e.,
(|(telephoneNumber=%)(Mobile=%) return all “telephoneNumber” or
contacts with specified filter value in “Mobile”.
x-P
LDAP Number Filter
(&(telephoneNumber=%) (cn=*)) return all contacts with specified
filter value and the set “cn“ field in “telephoneNumber”.
Set up the filter when configure mail inquiry.i.e.,
(|(mail=%)(mailBox=%)) return all contacts with specified filter value
LDAP Mail Filter
in “Mail” or“Mailbox”
(!(mail=%)) return all contacts without specified filter value in “Mail” ;
(&(mail=%) (cn=*)) return all contacts with specified filter value and
the set “cn“field in “mail”.
LDAP Displaying Name
Display onscreen name attribute, up to three attributes. Such
Attributes
as:%cn %sn %telephoneNumber
Max Hits
Search Timeout(ms)
Set up the max hit return to the LDAP server. If set to “0”, the server
will return all searched results. The default setting is 50.
Set up the search timeout return after inputting search info.The
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
186
GXV3275 WEB GUI
GXV3275 User Manual
default setting is “0”.
LDAP Lookup For Dial
LDAP
Lookup
For
“No”.
Set up whether to appy LDAP lookup for incoming call. The default
setting is “No”.
x-P
DF
Di
vis
ion
Incoming Call
Set up whether to appy LDAP lookup for dial. The default setting is
Figure 163 GXV3275 Web GUI Maintenance-Device Manager
Table 34 Maintenance/Device Manager Parameters
Parameters
Description
AE Mode
Bright environment and dark environment are optional.
Disable
Missed
Call
Backlight
Disable
If set to “Yes”, the LCD backlight will be disabled when there is a
missed call. The default setting is “No”.
Missed
Call
Indicator
If set to “Yes”, the LCD backlight will be disabled when there is a
missed call. The default setting is “No”.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
187
GXV3275 WEB GUI
GXV3275 User Manual
Set up whether to disable LED MWI Indicator when there is a unread
Disable MWI Indicator
message. The default setting is “No”.
Disable New Message
If set to “Yes”, the indicator will be disabled when there is a new
Indicator
message. The default setting is “No”.
Disable
Contact
or
Message Full Indicator
Disable Indicator When
LCD is Off
If set to “Yes”, the indicator will be enabled when the storage of
contacts or messages is full. The default setting is “No”.
If set to “Yes”, the indicator will be disabled when LCD is Off. The
default setting is “No”.
The headphone volume setting controls the sent-out audio signal.
(dB)
The default is “0”.
RJ9 Headset RX Gain
The headphone volume setting controls the received audio signal.
(dB)
The default is “0”.
3.5mm
Earphone
TX
Earphone
RX
ion
RJ9 Headset TX Gain
3.5mm
vis
Gain (dB)
Gain (dB)
Di
Select Normal headset or EHS headset type.
Headset Type
Set whether to accept call and speaker Dial In RJ9 Headset
Dial
automatically.
In
RJ9
Headset
x-P
Automatically
DF
Accept Call and Speaker
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
188
UPGRADING AND PROVISIONING
GXV3275 User Manual
UPGRADING AND PROVISIONING
GXV3275 supports software upgrade via TFTP or HTTP/HTTPS. Go to Advanced Settings page to
vis
CONFIGURATION FILE DOWNLOAD
ion
configure.
Di
Grandstream SIP Devices can be configured via the WEB Interface as well as via a Configuration
DF
File (binary or XML) through TFTP or HTTP/HTTPS. The “Config Server Path” is the TFTP, HTTP
x-P
or HTTPS server path for the configuration file. It needs to be set to a valid URL, either in FQDN or
IP address format. The "Config Server Path" can be the same or different from the "Firmware
Server Path".
A configuration parameter is associated with each particular field in the web configuration page. A
parameter consists of a Capital letter P and multiple digit numeric numbers. i.e., P2 is associated
with the “Admin Password” in the Web GUI->Maintenance->Web/SSH Access page.
Note: For a detailed parameter list, please refer to the corresponding firmware release configuration
template.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
189
UPGRADING AND PROVISIONING
GXV3275 User Manual
When a Grandstream Devices boots up or reboots, it will issue a request for a configuration XML file
named "cfgx.xml" followed by a file named "cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the MAC
address of the device, i.e., "cfg000b820102ab". The configuration file name should be in lowercase
letters.
For more details on XML provisioning, please refer to:
http://www.grandstream.com/general/gs_provisioning_guide_public.pdf
ion
CONFIGURE SERVER
vis
CONFIGURE TFTP SERVER
Open the HTTP server, as shown in figure 164 below.
x-P
1.
DF
Di
The following chapter will take 3CDaemon TFTP as an example.
Figure 164 HFTP Server Interface
2.
Click “Configure TFTP Server”to bring out the dialog as shown in figure 165.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
190
UPGRADING AND PROVISIONING
GXV3275 User Manual
Set the path to save the file under “Upload/Download”in“TFTP Configuration”tab.
x-P
DF
Di
vis
3.
ion
Figure 165 HFTP Server Interface -Configure Dialog
Figure 166 Set HFTP Server Path
4.
Select the path then click “Ok” to bring out the following dialog.
Figure 167 Confirm Changes
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
191
UPGRADING AND PROVISIONING
GXV3275 User Manual
5.
Click “Yes” to confirm changes.
6.
Click “Ok” to close the dialog.
Note: The file uploaded to sever should be unzipped.bin file.
CONFIGURE HTTP SERVER
The following chapter will take 3CDaemon TFTP as an example.
ion
You could obtain Apache HTTP server installation provisioning from http://httpd.apache.org, and
follow the wizard to complete the default installation.
1.
vis
The following chapter will take using Apache HTTP Server2.2 in Windows XP as an example.
Open Apache server, go to Start > All Programs > Apache HTTP Server 2.2 > Monitor Apache
in the notification area of the taskbar indicates the Apache server has been
DF
The icon
Di
Servers on a PC installed with Apache server.
enabled. Select "Start" to enable the server when see
Save
the
file
under
the
Foundation\Apache2.2\htdocs.
Note
following
path:
x-P
2.
Installation
Path\Apache
Software
 If the file is saved under htdocs folder, the URL format for the phone to access
Apache server is: http:// IP address of the PC installed with Apache server. i.e.,
http://192.169.1.51
 If the file is saved under htdocs subfolder, the URL format for the phone to
access Apache server is: http:// IP address of the PC installed with Apache server
/Subfolder Name. i.e., http://192.169.1.51/filename
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
192
UPGRADING AND PROVISIONING
GXV3275 User Manual
FIRMWARE UPDATE

Update via upload firmware file

Manual update via firmware file

Auto update via firmware server
This chapter will introduce the three upgrade methods in details.
Note:
ion
GXV325 supports the following ways to update
vis
 It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used
in conjunction with the device in the process of update or it might be fail.
Di
 Please unpack the compression package before upload the file for update.
Go to Maintenance> Upgrade, set the update type to “Manual” and click the Upload button.
x-P
1.
DF
UPDATE VIA UPLOAD FIRMWARE FILE
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
193
UPGRADING AND PROVISIONING
GXV3275 User Manual
Figure 168 Select Firmware File
2.
The pop-up dialog will show on screen, users could confirm to update according to the prompt.
MANUAL UPDATE
The steps to update file via HTTP are the same as via TFTP. Theis chapter will take via TFTP as an
example.
Go to Maintenance>Upgrade, Select “No” in “ Automatic Upgrade” ,as shown in figure 169.
Figure 169 Set up Auto Update
Go to Maintenance>Upgrade, Select “Always Check at Bootup” in “Automatic Upgrade Rule”
vis
2.
ion
1.
DF
Di
option, as shown in figure 170.
Figure 170 Set up Automatic Upgrade Rule
Set up upgrade mode and upgrade server. Select “TFTP”in “Upgrade Via”option and input
x-P
3.
the local TFTP server address in the “Firmware Server Path” option. URL and IP address are
optional. See figure 171.
Figure 171 Set up Firmware update Mode
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
194
UPGRADING AND PROVISIONING
GXV3275 User Manual
4.
Uncheck “DHCP Option 66 Override Server”, as shown in figure169.If check, it allows the
phone to obtain IP address as well as the upgrade server address via DHCP. This address will
override the “Firmware server path” configured in step 3.
Figure 172 Set up whether to Enable Option 66 Override Server
Click “Save” to save the change.
6.
Click the Reboot icon to boot up the phone and upgrade the device.
ion
5.
vis
AUTO UPGRADE
The steps to upgrade via HTTP are the same as steps via TFTP. This chapter will take via TFTP as
Go to Maintenance>Upgrade, set up the rational upgrade check interval in “Automatic
x-P
Upgrade” option as shown in figure 173.
DF
1.
Di
an example
Figure 173 Automatic Upgrade Setting
2.
Go to Maintenance>Upgrade, Select “Always Check at Bootup” in “Automatic Upgrade Rule”
option, as shown in figure 174.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
195
UPGRADING AND PROVISIONING
GXV3275 User Manual
Figure 174 Automatic Upgrade Rule Setting
3.
Set up upgrade and upgrade server. Select “TFTP”in “Upgrade Via ”option and input the
local TFTP server address in the “Firmware Server Path” option. URL and IP address are
Figure 175 Upgrade Setting
Uncheck “DHCP Option 66 Override Server”, as shown in figure 180.If check, it allows the
vis
4.
ion
optional. See figure 175.
Di
phone to obtain IP address as well as the upgrade server address via DHCP. This address will
DF
override the “Firmware server path” configured in step 3.
5.
Click “Save” to save the change.
x-P
Figure 176 Set up Whether to Enable DHCP Option 66 Server
The phone will automatically upgrade when detects new firmware version on the sever.
FACTORY RESET
Warning！
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
196
UPGRADING AND PROVISIONING
GXV3275 User Manual
WARNING: Restoring the Factory Default Settings will DELETE all configuration information on the
phone. Please backup or print all the settings before you restore to the factory default settings.
Grandstream is not responsible for restoring lost parameters and cannot connect your device to
your VoIP service provider
VIA LCD MENU
Follow the steps below to restore the GXV3275 to the factory default settings.
ion
1. Press the MENU button and tap on Settings on GXV3275 desktop, or go to onscreen
MENU->Settings >Advanced Settings >Factory Reset;
x-P
DF
Di
vis
2. Tap on Factory Reset to bring out the dialog as shown in figure 177.
Figure 177 Factory Reset
3. Click OK to restore the phone to factory settings.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
197
UPGRADING AND PROVISIONING
GXV3275 User Manual
VIA THE WEB GUI
1. Login GXV3275 Web GUI and go to Maintenance->Upgrade page;
2. Click on the Reset button for Factory reset. See figure 178.
Figure 178 Web GUI-Factory Reset
vis
ion
3. A dialog box will pop up shown in figure 179;
VIA BUTTONS
x-P
DF
4. Click OK to restore the phone to factory settings.
Di
Figure 179 Web GUI-Confirm Factory Reset
When the message waiting indicator LED goes out the first time after the GXV3275 is powered,
press
and
at the meanwhile. When the indicator is on again, the phone will restore to
factory settings.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
198
FAQs
GXV3275 User Manual
FAQs
Q: Why my GXV3275 screen is dark?
Please check whether your phone is powered on. Please ensure that the GXV3275 is connected
ion
correctly to the power adapter.
vis
Q: Why my GXV3275 touch screen is not sensitive?
DF
Q: Why I can’t hear the dial tone through my GXV3275?
Di
Check that the power adaptor for GXV3275 is the original 12V BY adaptor.
Please ensure that all units of the GXV3275 have been installed and connected correctly. Please
x-P
refer to  to install the phone.
Q: Why my GXV3275 doesn’t ring when there is an incoming call?
Please check whether the phone volume has been set to minimum. Tap on
to turn up the
volume.
Q: Where can I check the GXV3275 IP address?
Please tap on the Account icon on the desktop then check the IP address on the upper left corner of
the page. See figure 184.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
199
FAQs
GXV3275 User Manual
Q: How to change the user password?
Please login the WEB GUI, go to Maintenance->Web/SSH Access and input new password in the
textbox of” User Password” option, save the change then reboot the phone.
x-P
DF
Di
vis
ion
Please visit our website: http://www.grandstream.cn/ for answers to your more questions.
Grandstream Co., Ltd
Software Version：1.0.0.9 Document Version：0.2
200

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : 
Create Date                     : 2014:03:30 04:12:35+08:00
Creator                         : Microsoft® Office Word 2007
Modify Date                     : 2014:03:30 04:12:35+08:00
Producer                        : Nestone  x-PDFDivision
Subject                         : 
Title                           : 
Page Count                      : 106

EXIF Metadata provided by EXIF.tools