Grandstream Networks WP820 Enterprise Portable Wi-Fi Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3930890
Application ID	hnbh2j1KC8OcgcFklt5n3w==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	100.86kB (1260744 bits)
Date Submitted	2018-07-19 00:00:00
Date Available	2018-07-19 00:00:00
Creation Date	2018-04-18 08:55:10
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-07-19 13:41:03
Document Title	User manual
Document Creator	Adobe InDesign CC 13.1 (Windows)

Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
In all EU member states, operation of 5150
- 5250 MHz is restricted to indoor use only.
WP820
Enterprise Portable Wi-Fi Phone
For Warranty and RMA information, please visit
www.grandstream.com
Quick Installation Guide
EN
The WP820 is not pre-confgured to support or
make emergency calls to any type of hospital,
law enforcement agency, medical care unit
(“Emergency Service(s)”) or any other kind of
Emergency Service. You must make additional
arrangements to access Emergency Services.
It is your responsibility to purchase SIP-compliant Internet telephone service, properly confgure the WP820 to use that service, and peri odically test your configuration to confirm that
it works as you expect. It is also your responsibility to purchase traditional wireless or landline telephone services to access Emergency
Services.
GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE
WP820. NEITHER GRANDSTREAM NOR ITS OFFICES, EMPLOYEES OR AFFILIATES MAY BE HELD
LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS,
AND YOU HEREBY WAIVE ANY AND ALL SUCH
CLAIMS OR CAUSES OF ACTION ARISING FROM
OR RELATING TO YOUR INABILITY TO USE THE
WP820 TO CONTACT EMERGENCY SERVICES,
AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH.
~1~
PRECAUTIONS
•Do not attempt to open, disassemble, or modify the device.
•Do not use a third party power adapter.
•Do not expose the device to temperatures outside the range
of 0 °C to 45 °C (32F to 113F) in operation and -20 °C to 60 °C
(-4F to 140F) in storage.
•Do not expose the WP820 at environments outside of the humidity range of 10-90% RH (non-condensing).
OVERVIEW
This powerful portable Wi-Fi phone features dual-band
802.11a/b/g/n Wi-Fi, Wi-Fi roaming and integrated Bluetooth.
It also bears a durable sleek design that allows it to drop
safely from 1.2 meters and great endurance with 150 hours
standby time and 7.5 hours talk time. The combination of advanced telephony features and durability make it ideal for
mobilizing your VoIP network in residences, warehouses, retail
stores, hotels and more.
WP820 PACKAGE CONTENTS
1x Rechargeable
Battery
1x Charging
Station
1x Handset
Belt Clip
5V
1x WP820
Handset
1x 5V Power
Adapter
1x Quick Installation Guide
1x GPL Statement
~2~
SETTING UP THE WP820
WP820 DESCRIPTION
Charging Station:
Plug the power adapter into a power source socket to start
using the charging station.
12. 3.5 mm
headset jack
•
Open the battery cover.
Insert the battery with the electrodes in the bottom left
corner.
Close the battery cover.
Note: Please charge the battery fully before using the handset for the first time.
1: Battery cover
2: Battery
3: Rear of handset
13. Color LCD
Screen
3. Volume
Up key
4. Volume
down key
Handset:
•
•
11. LED
indicator
2. Earphone
1: Charging station
2: Power adapter
5V
1. Proximity
Sensor
14. Softkeys
5. PTT key
6. Handsfree /
Speaker key
15. Contacts
7. 4 Arrow key
combination
(Up, Down,
Left, Right)
16. Menu/Ok key
8. Off-hook /
Dial key
17. On-hook or
Power key
9. Alphanumeric
keypad
18. #/ Lock key
10. */ Mute key
19. Microphone
~3~
~4~
CONNECTING WP820 TO WI-FI NETWORK
FCC warning
1. On LCD menu, press Menu key and navigate to Settings →
Network Settings → Wi-Fi.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
2. Set Wi-Fi to “On” and navigate to “Wi-Fi Settings”. A list of
Wi-Fi networks will be displayed.
3. Select the desired network to connect to. (Enter the correct
password to connect if requested)
(1)The device may not cause harmful interference, and
(2)this device must accept any interference received, including interference
that may cause undesired operation.
WP820 will display Wi-Fi icon on top of the main LCD menu if
the connection to the Wi-Fi network is successful.
Changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ACCESSING WP820 WEB GUI
This equipment has been tested and found to comply with limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
1. On LCD menu, press Menu key and navigate to Settings →
About → Network Status to obtain the IP address.
2. Type the phone’s IP address in your PC browser.
Note: The computer needs to be on same network as WP820.
3. The default administrator username and password are
“admin”; the default end-user username is “user” and the
password is “123”.
Refer to online documents and FAQ for more detailed
information: http://www.grandstream.com/our-products
~5~
~6~
Specific Absorption Rate (SAR) information:
information
SAR tests are conducted using standard operating positions accepted
by the FCC with the devices transmitting at its highest certified power
level in all tested frequency bands, although the SAR is determined
at the highest certified power level, the actual SAR level of the devices
while operating can be well below the maximum value.
Before a new model devices is a available for sale to the public,
it must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC, Tests for each devices are
performed in positions and locations (e.g. at the ear and worn on the
body)as required by the FCC.
For body worn operation, this model phone has been tested and meets
the FCC RF exposure guidelines when used with an accessory designated
for this product,body-worn operating is limited to the belt-clip and accessory.
Non-compliance with the above restrictions may result in violation of
RF exposure guidelines

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:04:18 08:55:10Z
Creator                         : Adobe InDesign CC 13.1 (Windows)
Modify Date                     : 2018:07:19 13:41:03-07:00
Language                        : en-US
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:07:19 13:41:03-07:00
Creator Tool                    : Adobe InDesign CC 13.1 (Windows)
Instance ID                     : uuid:007877ad-6493-4f52-9649-a897e99fd1df
Original Document ID            : xmp.did:6F5DBCAC341BDE11A4DBA5E1CFAA9A3A
Document ID                     : xmp.id:3ce26182-b047-864d-b7b2-10c665bf7160
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:af4ba592-4d28-d14a-9abc-1dac6198fc80
Derived From Document ID        : xmp.did:b70ed853-d30a-9940-b335-85cf0396d2f3
Derived From Original Document ID: xmp.did:6F5DBCAC341BDE11A4DBA5E1CFAA9A3A
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Windows)
History Changed                 : /
History When                    : 2018:04:18 08:55:10Z
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 5

EXIF Metadata provided by EXIF.tools