Green Badge d b a UgMO Technologies UG1000B 902 - 928 MHZ ISM BAND BRIDGE User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	1787773
Application ID	iI6AKd7k/NsbWmnlz1OFSQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	171.95kB (2149338 bits)
Date Submitted	2012-09-11 00:00:00
Date Available	2012-09-11 00:00:00
Creation Date	2012-09-04 18:48:10
Producing Software	Mac OS X 10.7.4 Quartz PDFContext
Document Lastmod	2012-09-04 18:48:10
Document Title	Microsoft Word - Quick Installation UG1000B-2012-09-04.docx
Document Creator	Word
Document Author:	Kathy

  
Quick Installation & Start Guide
The UgMO UG1000B Bridge is part of the UG1000 family of products. The Bridge
is responsible for making the internet connection between the UG1000 system
and UgMO Knows.
• Remote configuration and alert reporting
• Software upgradeable to allow for future feature
expansion
• Embedded Linux processor provides smart device
intelligence
  
  
  
UG1000 Internet Bridge
The UG1000 Internet Bridge serves as the gateway or avenue by which all network and
sensor data is passed to the UgMO Data Base. Each Bridge contains an embedded Linux
processor. The bridge also serves as a repeater in any network and can forward data
packets toward their final destinations.
To install the Bridge, you will need a 110 Volt AC power source that is near a router or
other direct Ethernet connection. Using the supplied 5 Volt transformer, insert the
barrel connector into correct port located on the bottom of the Bridge and the twopronged block into the nearest 110 Volt outlet. Next, plug one end of an Ethernet cable
into a router using your WAN and the other end into the Ethernet slot located on the
bottom of the bridge. Finally, to mount the hardware you can use a screw and the keyhole
slot in the back of the bridge or simply hang the Bridge from the supplied plastic stand.
Once powered, a red LED on the front of the bridge will aluminate followed by a series of
Green LEDs as the bridge searches the area for any existing hardware or networks. The
LEDs are very helpful in determining the current state and operation of the bridge.
  
  
  
Regulatory Notices
FCC	
  ID:	
  YVAUG1000B;	
  	
  IC	
  ID:	
  	
  10216A-­‐UG1000B	
  
This	
  device	
  complied	
  with	
  Part	
  15	
  of	
  the	
  FCC	
  Rules	
  and	
  Industry	
  Canada	
  License	
  Exempt	
  RSS	
  Standard(s).	
  Operation	
  is	
  subject	
  to	
  the	
  
following	
  two	
  conditions:	
  
  (1)	
  This	
  device	
  may	
  not	
  cause	
  harmful	
  interference,	
  and	
  	
  
(2)	
  This	
  device	
  must	
  accept	
  any	
  interference	
  received,	
  including	
  interference	
  that	
  may	
  cause	
  undesired	
  operation.	
  
  
This	
  equipment	
  has	
  been	
  tested	
  and	
  found	
  to	
  comply	
  with	
  the	
  limits	
  for	
  Class	
  B	
  Digital	
  Device,	
  pursuant	
  to	
  Part	
  15	
  of	
  the	
  FCC	
  Rules.	
  
These	
  limits	
  are	
  designed	
  to	
  provide	
  reasonable	
  protection	
  against	
  harmful	
  interference	
  in	
  a	
  residential	
  installation.	
  	
  
  
• This	
  device	
  may	
  only	
  be	
  used	
  with	
  the	
  approved	
  internal	
  antenna	
  that	
  is	
  shipped	
  with	
  the	
  unit	
  and	
  installed	
  per	
  installation	
  
instructions.	
  	
  The	
  use	
  of	
  any	
  other	
  antennas	
  will	
  invalidate	
  the	
  unit’s	
  FCC	
  Part	
  15	
  certification.	
  
• To	
  reduce	
  potential	
  radio	
  interference	
  to	
  other	
  users,	
  the	
  antenna	
  type	
  and	
  its	
  gain	
  should	
  be	
  so	
  chosen	
  that	
  the	
  equivalent	
  
isotropically	
  radiated	
  power	
  (e.i.r.p.)	
  is	
  not	
  more	
  than	
  that	
  permitted	
  for	
  successful	
  communication.	
  	
  Operating	
  the	
  device	
  
with	
  the	
  supplied	
  antenna	
  will	
  ensure	
  that	
  this	
  requirement	
  is	
  met.	
  
  
This	
  equipment	
  generates	
  and	
  can	
  radiate	
  radio	
  frequency	
  energy	
  and,	
  if	
  not	
  installed	
  and	
  used	
  in	
  accordance	
  with	
  the	
  instructions,	
  
may	
  cause	
  harmful	
  interference	
  to	
  radio	
  communications.	
  However,	
  there	
  is	
  no	
  guarantee	
  that	
  interference	
  will	
  not	
  occur	
  in	
  a	
  
particular	
  installation.	
  	
  
If	
  this	
  equipment	
  does	
  cause	
  harmful	
  interference	
  to	
  radio	
  or	
  television	
  reception,	
  which	
  can	
  be	
  determined	
  by	
  turning	
  the	
  
equipment	
  off	
  and	
  on,	
  the	
  user	
  is	
  encouraged	
  to	
  try	
  to	
  correct	
  the	
  interference	
  by	
  one	
  or	
  more	
  of	
  the	
  following	
  measures.	
  
• Reorient	
  or	
  relocate	
  the	
  receiving	
  antenna	
  
• Increase	
  the	
  separation	
  between	
  the	
  equipment	
  and	
  receiver	
  
• Connect	
  the	
  equipment	
  into	
  an	
  outlet	
  on	
  a	
  circuit	
  different	
  from	
  that	
  to	
  which	
  the	
  receiver	
  is	
  connected	
  
• Consult	
  the	
  dealer	
  or	
  an	
  experienced	
  radio/TV	
  technician	
  for	
  help	
  
Any	
  changes	
  or	
  modifications	
  not	
  expressly	
  approved	
  by	
  the	
  party	
  responsible	
  for	
  compliance	
  could	
  void	
  the	
  user’s	
  authority	
  to	
  
operate	
  the	
  equipment.
This	
  Class	
  B	
  digital	
  apparatus	
  complies	
  with	
  Canadian	
  ICES-­‐003.	
  
Cet	
  appareil	
  numérique	
  de	
  la	
  classe	
  B	
  est	
  conforme	
  à	
  la	
  norme	
  NMB-­‐003	
  du	
  Canada.	
  
  
  

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 3
PDF Version                     : 1.4
Title                           : Microsoft Word - Quick Installation UG1000B-2012-09-04.docx
Author                          : Kathy
Producer                        : Mac OS X 10.7.4 Quartz PDFContext
Creator                         : Word
Create Date                     : 2012:09:04 18:48:10Z
Modify Date                     : 2012:09:04 18:48:10Z

EXIF Metadata provided by EXIF.tools