Greentech Group BC-4300DVD CAR DVD PLAYER User Manual 4300DVD BASIC TV BT

Greentech Group Ltd. CAR DVD PLAYER 4300DVD BASIC TV BT

USERS MANUAL

OWNER's MANUALMobile Video SystemDetachable PanelMotorized Slide Down And4.3 Inch Wide Color Touch Screen MonitorCAR DVD/VCD/CD/MP3 Player With BluetoothAM/FM Digital PLL Tuning RadioMPEG4 PlayerUSB ConnectTV TunerTOUCH SCREENDIGITAL VIDEOCOMPACTDIGITAL AUDIOCOMPACTCH 1-6IRAUX INPAI RMENURELEQRESETVOL+DISPAPSVOL- MUBNDSELCAR DVD/VCD/CD/MP3/MPEG4/TV PLAYERMODMICMENUDVD/RECEIVER CONTROLDVD/RECEIVER CONTROLSETUPENTER12345 67890VOLSELA/PSMUTE STOPMO/STCLKPLAY/PAUSEEQANGLEMODEBANDVOLOSDTITLE/PBCLO/DXGOTO +10TOP INTRDMRPTPAIR LOUDREDIAL
Contents1Precautions .....................................Safety Information.........................Disc Notes ....................................Installation ....................................Electric Connection ......................Remote Control ...........................Control Panel ................................Basic OperationsRadio Operations ..........................DISC Operations ...........................DISC Special Functions ................Detaching the control panel ...........Changing the control panel ............Touch PanelUnit Keys ...................................TFT Monitor.....................Audio Quality Adjustments............Scroll Caption Adjustments ..........Listening to the radio ...................Storing stations in memory ...........Listening to a preset station .........Basic Operations ........................Select Playback Mode .................AUX Operation ............................On-Screen Disc Operations .........Selecting audio languages ...........Selecting Subtitles .....................................................Adjustment .............Rear View Camera............Setting Audio Mode .....................Reset The Factory Setting..........................27272830303132353537372833353839131314181818191919202022224252627272356891011172027212Setup .............................................BLUETOOTH Operation..................Other Main Operations ...................Specifications ...............................Trouble Shooting ..........................Selecting multi-angle views ..........Title menu function ......................General Setup ............................Speaker Setup ...........................Dolby Digital Setup ....................Preferences Setup ......................Defaults Table ............................USB Operations ..........................TV Operations ............................MP3/WMA/JPEG Play ................MPEG4 Play ..............................
2PrecautionsTHANK YOU FOR PURCHASING THIS CAR DVD PLAYER .Before operating the unit, read this manual thoroughly and keep it handyfor future reference .To avoid injury or accident , read the following precautions beforeinstalling and operating the unit .ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANELNOTES ON CLEANINGDo not press on the LCD panel on the unit as doing so can distort thepicture or cause a malfunction . The picture may become unclear , or theLCD panel may be damaged .-Clean the LCD panel with a slightly damp soft cloth.-Do not use solvents such as benzine, thinner, commercially availablecleaners or antistatic spray .Do not use alcohol to clean the screen .If your car was parked in a cold or hot place, the picture may not be clear .The monitor is not damaged . The picture will become clear the temper-ature in your car becomes normal .-DO NOT install any receiver in locations where;- it may obstruct the steering wheel and gearshift lever operations, as thismay result in a traffic accident.- it may obstruct the operation of safety devices such as air bags, as thismay result in a fatal accident.- it may obstruct visibility.DO NOT operate any receiver while manipulating the steering wheel, asthis may result in a traffic accident.The driver must not watch the monitor while driving.IF THE DRIVER watches the monitor while driving, it may lead tocarelessness and cause an accident.IF YOU NEED to operate the receive while driving, be sure to look aheadcarefully or you may be involved in a traffic accident.IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on themonitor, and no playback picture will be shown.- This warning appears only when the parking brake wire is connected tothe parking brake system built in the car ( refer to the electric connection)ON INSTALLATION
3Safety InformationCAUTION:WARNING:REGION MANAGEMENT INFORMATION:THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVDPLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATETHE DVD PLAYER CORRECTLY AS INSTRUCTED.USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OFPROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT INHAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOTREPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THISEQUIPMENT TO RAIN OR MOISTURE.TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYINGINTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.This product incorporates copyright protection technology that is protectedby method claims of certain U.S. Patents and other intellectual property rightsowned by Macrovision Corporation and other rights owners.Use of thiscopyright protection technology must be authorized by Macro vision Corporation,and is intended for home and other limited viewing uses only unlessotherwise authorized by Macrovision Corporation. Reverse engineering ordisassembly is prohibited.This DVD Player is designed and manufactured to respond to the RegionManagement Information that is recorded on a DVD disc. If the Region numberdescribed on the DVD disc does not correspond to the Region number of thisDVD Player, this DVD Player cannot play this disc.
Safety Information4 FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE. Warning : This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. & This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.
Disc NotesPreparing New Discs withSpotsRoughA new disc may have rough edges onits inside and outside edges.If a discwith rough edges is used, the propersetting will not be performed and theplayer will not play the disc.Therefore,remove the rough edges in advanceby using a ball point pen or pencil asshown on the right.To remove therough edges, press the side of the penor pencil against the inside and outsideedges of the disc.Rough spotsonoutside edgeBall point penor pencilRough spotson insideedgeDo not touchtheundersideof the discDo notbendWipe the disc fromcentertoward the outsideedgeLabel sideupDisc CleaningUse a dry soft cloth to wipe the surface.If the disc is quite dirty, use a soft clothslightly moistured with isopropyl (rubbing)alcohol. Never use solvents such asbenzine, thinner or conventional recordcleaners as they may mar the surface ofthe disc.Handling and CleaningDirt, dust, scratches and warping discwill cause misoperation.Do not place stickers or makescratches on discs.Do not warp discs.A disc should always be kept in itscase when not in use to prevent fromdamaging.Do not place discs in the followingplaces:1.Direct sunlight2.Dirty, dusty and damp areas3.Near car heaters4.On the seats or dashboardDiscs which cannot be playedwith this playerDVD-ROMDVD-RAMCDVCD-GNote:A disc may become somewhat scratched(although not enough to make itunusable) depending on your handle itand conditions in the usage environment.Note these scratches are not anindication of any problem with the player.5Disc formats supported by thisplayerDVDVCDCDMP3Audio and VideoDiscsize12cmAudio and VideoDiscsize12cmAudioDiscsize12cmAudioDiscsize12cm
Choose the mounting location where the unit will not interfere with the normaldriving function of the driver.Before finally installing the unit, connect the wiring temporarily and make sureall connected up properly and the unit and the system work properly.Use only the parts included with the unit to ensure proper installation. The useunauthorized parts can cause malfunctions.Consult with your nearest dealer if installation requires the drilling of holes ormodifications of the vehicle.Install the unit where it does not get in the driver s way and cannot injure thepassenger if there is a sudden stop, like an emergency stop.If installation angle exceeds 30 from horizontal, the unit might not give itsperformance.Avoid installing the unit where it would be subject to high temperature, suchdirect sunlight, or from hot air, from the heater, or where it would bedirt or excessive vibration.This unit can be properly installed either from "Front"(conventional DINor "Rear"(DIN Rear-mount installation, utilizing threadedthe unit chassis). For details, refer to the followingillustrated installation methods.NOTES:DIN FRONT/REAR-MOUNTit isofotheroptimumas fromsubject to dust,Front-mount)screw holes at the sides of'Installation630
INSTALLATION7If you want to take CHASSIS out of the SLIDE BRACKET HOUSING,first remove the PLASTIC COVER of the both sides away, then insertthe two KEY PLATE into left and right side of chassis as above illustration.DASH BOARDMETAL MOUNTINGSTRAPHEX NUTSPRING WASHERPLAIN WASHERTAPPING SCREWCONSOLESLIDE BRACKETHOUSINGHEX BOLTKEY PLATEKEY PLATEPLASTIC COVER
How To Remove And Install The Front PanelWhen detaching or attaching the control panel, be careful not to damage theconnectors on the back of the control panel and on the panel holder.Detaching The Front PanelBefore detaching the control panel, be sure to turn off the power.1). Press the release button and the left hand side of the front panel will release.(FIG. 1)2). Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3)Attaching The Front Panel1). First insert the right hand side of the front panel into the hollow of the unit .2). Gently push the left hand side of the front panel until you feel a “ Click” .and then press the PWR button (2) briefly to switch the device ON.Attaching The Front Panel8InstallationFIG.4FIG.3PROTECTIVE CASEFRONT PANELFIG.2FRONT PANELFIG.1FRONT PANELRELEASE BUTTON
Panel Angle Adjustment9Caution:Do not insert your finger behind the control panel.When you want to change the viewing angle of the operating unit to play,you can press the (angle)button repeatedly to select the desired angleas follows:CHANGING THE CONTROL PANEL ANGLEAngle 3Angle 4Angle 1 Angle 2
Electric ConnectionWIRING CONNECTION10Note:the earth connection cable (parking brake B-) must be connected in order for DVDpictures to be played back to the monitor. If the cable has not been correctlyconnected, the message “PARKING BRAKE” appears on the monitor.VIDEO IN YELLOWRCH IN REDLCHINWHITEGREY SUBWOOFERVIDEO OUT 2 YELLOWCOAXIAL OUT BROWNWHITE (B+)12VREAR CAMERA SWITCHGREENYELLOWAUX(optional)RCA CABLEREAR CAMERA INPUT(B-)PARKING BRAKEFRONT RCA WHITE LRCH REDLCH WHITEFRONT RCA RED RVIDEO OUT 1 YELLOWREAR RCA OUTPUTCABLE (optional)FRONT RCA OUTPUTCABLE(FOR RCA LINE OUT VERSION ONLY)GREYGREY/BLACKFRONTRch SPK.VIOLETVIOLET/BLACKWHITEWHITE/BLACKGREENGREEN/BLACKREARLch SPK.AUTOANTENNA BLUEFUSEGROUND(B-)MEMORYBACK-UP(B+)IGNITIONSWITCH(B+)ANTENNA CONNECTORREDYELLOWBLACKMAIN UNITREARRch SPK.FRONTLch SPK.CHOKEBOXTV ANT IN
Remote Control111.CLK2.PAIR/3.STOP4.SETUP5.MO/ST(AUDIO)6. SUBTITLELO/DX7. REDIAL/8.GOTO/9. /10.SEL11. VOL+/VOL-12. / / /13.MENUSUB WOOFER14.BAND(OSD)15. /MOD16.PLAY/PAUSE17.MUTE18.TITLE/PBC(A/P)19.20.ANGLE21.EQ/LOUD22.SEARCH23.ENTERPress it briefly to show / hide the clock, press longer to set the time.Press it to use the Bluetooth function , refer to the page 33 .Press it to stop playback, press PLAY/PAUSE to resume playback .Press it to open the SETUP menu.In radio mode, press it to select STEREO or MONO mode (In discmode, press it to changing of the AUDIO soundtrack on multiaudiosoundtrack dvd disc. Changing of the sound mode of the VCD/CD disc.)Changing of the SUBTITLE language on multi-subtitle languageDVD disc. In radio mode,.Press this button for distance reception whenyou are located at weak signal location, depress it for stronger signal.Press this button to use the Bluetooth function, refer to the page 33.Press to skip to the next track & press to skip back one track.(Note:In DVD mode, press continually the twice to skip back one track.)Press it to adjust volume levelUse these buttons to navigate the various menus present in the product.In TV mode, press / to fine tune. Press the / to select channelupward and downward.Press it to display the root menu of the DVD disc. Press it longer to switchthe Subwoofer ON and OFF.select the TV, Disc, Radio , AUX In ,BT Music mode.Display the TITLE menu that is stored in DVD disc changing betweenPBC ON and PBC OFF on the VCD disc.(Auto store and preset scanfunction in radio stations .)Press it to adjust the screen viewing angle. (See page 8.)Changing of the view angle on multi-angle DVD disc.In TV mode, Press it to search TV channel automatically.In DISC mode, Press it to start forward rapidly.Confirm the Track/Chapter selected with the number key or selected withthe cursor buttons on TV screen.Press this button to begin playback at a moment in the program youdesignate. Use the number buttons to enter the data that is needed.In Bluetooth menu, it serves as the button on your mobile handset.Press this button repeatedly to cycle through the various audio and videoadjustments you can make: Volume, Bass, Treble, Balance, Fader, Color,BG Color, Brightness, Contrast Tint and Bluetooth .In Radio mode, press this button repeatedly to switch between the fiveradio bands, In Disc Playback modes, Press this button to see informationabout the disc currently in play.Press this button to turn the unit ON , press and hold to turn the unit OFF.Press it briefly toIn Disc Playback mode, press to pause playback. Press again to startwhere playback stopped.Press this button to turn off the audio. Press again to restore the soundto its prior volume level.,Press it to turn to equalization function. In radio mode, when reduce thevolume to half level, press it to enhance the bass effect.151719131472624111831652012127912104826232225MENUDVD/RECEIVER CONTROLDVD/RECEIVER CONTROLSETUPENTER12345 67890VOLSELA/PSMUTE STOPMO/STMODECLKPLAY/PAUSEEQANGLEBANDVOLOSDTITLE/PBCLO/DXGOTO +10TOP INTRDMREDIALPAI R LOUDRPT
Remote Control12Using the Remote ControlFace the remote control towards the player front face IR mark (remote control signalreceiver).Operation angle: About 30 degree in each the direction of the front of the IR mark.Preparing the Remote Control1.First push to inside as the direction indicated by the arrow (See )And thenRemove the battery holder as the direction indicated by the arrow (See ).2.Replace the battery Set a new battery property with (+)side up as illustrated(See ).3.Insert the battery holder. Push in the holder to the original position(See ).1234Inserting the Batteries24.SKIP25. 0 - 926.+10/27. RADIO PRESETIn TV mode, press it to ADD and DELETE channel .In DISC mode, press it to reverse rapidlyTens digit select button, cooperatively used with numeric buttons.Six preset memory buttons.These buttons are used for numeric entry in many different menus.In Bluetooth menu, it serves as the button on your mobile handset.
191316 21745819106141112157320TOUCH SCREENDIGITAL VIDEOCOMPACTDIGITAL AUDIOCOMPACTCH 1-6IRAUX INPAI RMENURELEQRESETVOL+DISPAPSVOL- MUBNDSELCAR DVD/VCD/CD/MP3/MPEG4/TV PLAYERMODMIC18Control Panel13AUX INLUD SWF POP 11:08DISCVOLUME- SEL VOLUME+CALL RECALLMOD8.Volume- : volumeadjustment (-)Touch Screen Key :3. : mute function4.MOD : select input mode6.Volume+ : volume adjustment (+)7.SEL : select the menu of theSound/Picture5. : Previous1.CALL :Answer a callRECALL2. : Reject a callKey FunctionsTouch Panel
14Unit Keys :1.REL BUTTONPress this button to release the front panel for removal . Refer to see page 7.Control Panel2. (POWER On/Off)/MOD BUTTONPress it to switch the device ON, press and hold (approximately 2 seconds) toswitch the device OFF . During the playback mode, you can press it to select aninput mode by pressing repeatedly until proper one is found:TV >AUX IN > RADIO > DISC > BT MUSICIf you are in USB playback mode and want to select the DISC mode, press theSTOP button and then press the GOTO button.3.VOL+/ VOL- knobIn normal mode, this knob is used to increase or decrease the volume. It is alsoused as an UP/DOWN knob when audio or video settings are being adjustedwhen accessed using the SELECT button.5. BAND/ BUTTONpress it repeatedly to select the desired radio band: FM1, FM2,FM3, AM1(MW1), AM2(MW2) .In Radio mode,In Bluetooth menu, you can press this button to use the Bluetooth funtion,please refer to see page 33.4.SELECT KNOBTo access the available adjustment settings for audio and video, press this knobrepeatedly to cycle through and select them:Tint Contrast Bright Color BG ColorVolume Bass Treble Balance Fader191316 21745819106141112157320TOUCH SCREENDIGITAL VIDEOCOMPACTDIGITAL AUDIOCOMPACTCH 1-6IRAUX INPAI RMENURELEQRESETVOL+DISPAPSVOL- MUBNDSELCAR DVD/VCD/CD/MP3/MPEG4/TV PLAYERMODMIC18
Basic Operation158. MU BUTTONPressitbuttontoswitchtheMUTEorNOT.9. (ANGLE)BUTTONyou can change the viewing angle of the operating unit . Press this button up tofour times in order to select the desired position.10. /CH 1-6 ( ) BUTTONRADIO PRESETa). In Disc Playback ModePress this button to pause playback, press it again to resume playback.b). In Radio ModePress this button repeatedly to preset station.6. EQ BUTTONPress the EQ button briefly to turn to equalization function and to select desiredaudio mode. There are five kinds of mode as below:JAZZ CLAS POP ROCK FLAT7. APS/DISP BUTTONAutomatic Memory Function:Program Scan Function:Display ON/OFF Function:TV System SelectIn Radio mode, press the APS/DISP button for about 2 seconds to activeautomatic station storage. The radio searches within the current frequency band,e.g. FM1, for the strongest station are then allocated to the correspondingstorage locations. Then the station of the first storage location is set.If you would like to search for more stations in the FM band, press the BNDbutton(5) in order to change to the FM2 or FM3 band. Press it again for about 2seconds to continue search.In Radio mode, press the APS/DISP button to scan and play briefly all the presetsations in order, and it will hold at each band for about 5 seconds . If you like oneof them, press the PLAY/PAUSE button to stop the scanning .In Disc mode, press the APS/DISP button to turn off the display image(the monitor on the unit only) , the sound will stay on. (Swing it again to resumethe playback picture mode.)In Radio mode, You can press SEL button briefly to select the “BG COLOR” byrepeatedly pressing the SEL button, then press the VOL+/- to select thebackground color among of the “AUTO, BG COLOR: 01........BG COLOR: 11”,in “ AUTO” mode, the monitor of unit will change the background colorautomatically.In TV mode, press the SEL knob briefly to select the TV standards by repeatedlypressing the SEL knob , you can use the VOL+/- knob to select among “PAL-BG”,“PAL-DK”, “PAL-I”, “PAL-M” , “PAL-N”, “NTSC”, “SECAM-BG”, “SECAM-DK” .
1614. RESET buttonPress this button can return to the original setup .15. IR sensor13. (EJECT) buttonPress it button to eject the DISC or insert the DISC to start play .16. AUX Input JackFor information about connecting a AUX device, please see page 24 .17. USB PORTFor information about connecting a USB device, please see page 34.18. TFT Display (liquid crystal display)The operation of the TFT, please see page 17.Control Panel20. MIC (microphone)Microphone position .12.PAIR/ BUTTONIn Bluetooth menu, press this button to use the Bluetooth function, how to use it ,please refer to see page 33.19. MENU BUTTONPress it to display the root menu of the DVD/VCD(Only when PBC not in use) disc.11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)a) In DISC, USB mode:if you wish to jump forwards or backwards press the or button briefly(Note: during the DVD playback , press the button continually twice to skipback one track during playback.)To wind through the tracks pressed and hold the or button for about 2seconds. FF X2 appears in the display. Operating the or button again,the speed of rapid forward/reverse changes according to the discas follow: (Note:For some VCD 2.0 dics(PBC-playback control), andbuttons may be unavailable.)DVD/VCD/CD/MP3:Normal Playback 2x 4x 8x 16xb) In Radio Mode:press the or button briefly to set a radio station manually. pressed andhold for about 2 seconds to start the search for a radio station automatically.
17Basic OperationSetting The ClockTouch the CLK section on thescreen and hold for about 2seconds the hour will flash ,press the VOL+/- to adjust .Touch it again, the minutewill flash, then use the VOL+/-to adjust .Setting The Buzzer ON/OFFTouch the SEL section on thetouch screen to select theBUZZER item, and then touchthe VOL+/- (or press the vol+/vol-) to switch the BUZZERON/OFF .Touch the screen theVOLUME- to decreasethe volume level .Touch screenTouch the screen theVOLUME+ to increasethe volume level .Setting Blue-tooth ON/OFFTouch the SEL section on thetouch screen to select theBlue-tooth item, and thentouch the VOL+/- (or pressthe vol+/-) to switch the Blue-tooth ON/OFF .Press it to switch the device ON,press and hold about 2 secondsto switch the device OFF.POWER On/OffSELCLKVOLUME-VOLUME+Ejecting The DiscUse your finger touch therange on touch screen ,the control panel of the unitwill swing downwards . Thenyou can insert the disc or eject the disc .(You can also press the button on thefront panel to eject the disc or insert thedisctostartplay.)Select SourcesTouch the MODsection on the screen, thesignals will display in thescreen as follow :repeatedlyDISC AUX IN RADIOBT MUSICTVMODMute FunctionUse your finger touchthe section , it willmute the sound but thedisc continues playing.Touch it again to resume .VOL-VOL+Volume AdjustingVolume buttonABPress the VOL+/- on remote control ,to change the volume level .Press the VOL+/- on the front panel toIncrease/decrease the volume level .SEL
LUD SWF POP 11:08DISCDVD 11-0:44:36MODVOLUME- VOLUME+SEL18TFT Monitor AdjustmentDuring DISC playback, use yourfinger to touch briefly the SELsection on the screen (or pressSEL button on front panelmode)to access the Pictureselection menu, by repeatedly touch theSEL section, and then touch the VOL+/-(or press the VOL+/-) to adjust theselected mode .(The corresponding value will show onthe monitor )COLOR: 0 to 32Adjust the color for the picture-lighter ordarker.BRIGHT:0to32Adjust if the picture is too bright ortoo dark.CONTRAST: 0 to 32Adjust the contrast of the bright and darkportion.TINT:0to32Adjust the tint if the human skin color isunnatural.-Adjustable when NTSC is selected forNTSC/PAL .ADJUSTABLE ITEMS:““““Rear View CameraWhen connecting the rear view camera.the mirror image of the rear view throughthe rear view camera is automaticallydisplayed on the monitor when youchange the gear to the back position.(The monitor on the unit only.)Basic OperationAudio Quality AdjustmentDuring DISC playback, use yourfinger touch briefly the SELsection on the screen (or pressSEL button on the front panel )to across the Sound mode selectionmenu, by repeatedly touch the SELsection, and then touch the vol+/-(or press the vol+/-) to adjust theselected mode . (The correspondingvalue will show on the monitor )It`s depend on your habit to setup the data .ADJUSTABLE ITEMS:Volume:Bass:Treble:0to32Adjust volume level by using VOL +/-.-14to+14Adjust bass level by using VOL +/-.-14to+14Adjust treble level by using VOL +/-.Volume Bass Treble BalanceContrast Bright ColorTintFaderBuzzerBluetoothSELSELtouch to adjusttouch to selectLUD SWF POP 11:08DISCDVD 11-0:44:36MODVOLUME- VOLUME+SELtouch to adjusttouch to selectVolume Bass Treble BalanceContrast Bright ColorTintFaderBuzzerBluetooth
19Reset Factory SettingsRESET button is placed on the housingand must be activated with either aballpoint pen or thin metal object.TheRESETbutton istobeactivatedforthe following reasons:Basic OperationBalance:Fader:R0-10toL0-10.Adjust sound balance between leftand right speakers by using VOL + / -F0 10toR0-10.Adjust sound balance between front andrear speakers by using VOL + / VOL - ..-FM1 106.30 MHzST DXLUD SWF POP 11:08DISCIn Radio mode:You can adjust your desired scrollcaption , the method of the operationas follow:a). Press and hold the SETUP button(for about 2 seconds) on the remotecontrol, the adjustment scroll barwill display on the screen .b). Use the VOL+/- to select among ofthe “A, B, C ....X, Y, Z, and blank ”,and use the / button on thefront panel to ahead/back (proceed/cancel) , and then press the SETUPbutton briefly to confirm .Scroll Caption AdjustmentDVD 11-0:44:36LUD SWF POP 11:08DISCOSDCLKDSPRDM INT RPTSWF LUDRPTTouch the screen the DSP range(or press the EQ/LOUD buttonon the remote ) to select one ofthe preset sound modes .(Rock/Pop/Jazz/Classic/Flat) .The information will display in themonitor as follow :Setting Audio ModesIt`s depend on your habit to select the Audio mode .POPFLATROCKCLASSICJAZZDSPtouch to selectNOTE:If RESET is selected, all memory datawill deleted, please re-adjust .A. Initial installation of the unit whenall wiring is completed.B. All the function buttons do not operate.C. Error symbol on the display.(Press it button longer again to renew . )RESETRESET
Radio Operation20Listening to the Radio Selecting The Frequency BandFM1 FM2 FM3AM2(MW2) AM1(MW1)Start Searching For a StationTouch the MOD range repeatedlyon the touch screen to select theRADIO mode. (You can alsopress repeatedly the / MODbutton to select the RADIO .)Switching To Radio Modethe following information will appears onthe display :MODTouch the BND section on thetouch screen repeatedly to selectthe band , screen band will showin turn :You can also press the BND on frontpanel repeatedly to select the band .()BNDTouch the ST/MON section ontouch screen (or press ST/MObutton on the remote) to selectthe MONO or STEREO mode .When an FM stereo broadcast ishard to receive()When Stereo mode is activated, the STsymbol will appear .ST/MONTouch it to previous .Touch it to select the other item,it will display the followingas below :Touch it to select the other item .FM1 106.30 MHzST DXCH6LUD SWF POP 11:08DISC4 5 62 31 MODBNDDuring Radio mode, press the button(or touch the “ ” section briefly) toincrease frequency by one step ofchannel spacing .Press the button (or touch the “ ”section ) briefly to decrease frequencyby one step of channel spacing .Manual SearchAutomatic SearchDuring Radio mode, press and hold(for about 2 seconds ) the / button(or touch the section long) tostart search for a radio stationautomatically ./FM1 106.30 MHzST DXCH6LUD SWF POP 11:08DISCPAIRDSP CLK LOCSWF LUD APSST/MONFM1 106.30 MHzST DXCH6LUD SWF POP 11:08DISCCALLSELRECALLVOLUME- VOLUME+
FM1 106.30 MHzST DXCH6LUD SWF POP 11:08DISC4 5 62 31 MODBNDRadio Operation21Touch the LOC section on thetouch screen (or press LO/DXbutton on the remote) to selectthe LOCAL or DX mode .To tune in strong-singnal FMStation only (LO/DX function)()You can choose between the LOCALand DX(DISTANCE) mode for local orlong-distance traffic news .Storing Stations In MemorySetting MemoryPress the /CH 1-6 button repeatedlyon the front panel to preset stations atradio mode . Or touch the screen the1-6 sections()With this system, a total of 30 stationscan be stored in the memory of sixbuttons. Each band stores up to sixpreset stations. The stations might beFM1, FM2, FM3, AM1(MW1), andAM2(MW2) band.The operation is as below :-Store in MemoryTouch and keep the 1-6 sections(or press and hold the /CH 1-6) forabout 2 seconds, the current listeningstation will be stored into thenumber location .-Retrieve a preset stationTouch the 1-6 sections briefly (or pressthe /CH1-6 button repeatedly) toretrieve a station which had beenstored in the memory in advance thechose number is shown on display .LOCScan FunctionIn Radio mode, briefly touch theAPS section on the touch screen(or swing the SEL knob briefly inthe APS/DISP direction) , the radiobriefly plays all the preset stations of thefrequency band .APSAutomatic Preset SetupIn Radio Mode, Touch and keepAPS section on the touch screen(or swing and hold the SEL knob indirection of APS/DISP) for about2 seconds to active automatic stationstorage. The radio searches within thecurrent frequency band, e.g. FM1, forthe stronger signal level until the searchcycle has finished . The six strongeststations are then allocated to thecorresponding storage locations . Thenthe station of the first storage locationis set .APSTouchtopresetstationAutomatic Memory Storing &Program ScanningTouch it to select the other item,it will display the followingas below :FM1 106.30 MHzST DXCH6LUD SWF POP 11:08DISCPAIRDSP CLK LOCSWF LUD APSST/MONTouch to select
DISC Operation22Basic Operation1.Previous2.Next3.Pause4.Stop5.Mute6.Mode7.To next page8.Volume+(adjustment+)9.Select10.Volume-(adjustment-)During the DISC playback, use thefinger touch the touch screen , it displaywill following as bellow :Touch it to select the other item .Touch it to select the other item .Touch it to select the other item .Above these operation buttons forDVD setup.Touch it for previous .Touch it to select the other item, itwill display the following as below:(when the parking brake is applied)13245687910MODVOLUME- VOLUME+SELLUD SWF POP 11:08DISCDVD 11-0:44:36CALL RECALLPAIRZOOMLUD SWF POP 11:08DISCDVD 01-0:44:36MODVOLUME- VOLUME+SELLUD SWF POP 11:08DISCDVD 11-0:44:36GOTOSETTITLESUBTITLE AUDIOLUD SWF POP 11:08DISCDVD 01-0:44:36MODVOLUME- VOLUME+SELDVD 11-0:44:36ENTDVD 11-0:44:36LUD SWF POP 11:08DISCOSDCLKDSPRDM INT RPTSWF LUD
DISC OperationSwitching the DVD modeStopping PlayTouch the screen the range (orpress the button on remotecontrol .) To stop the unit playback.Touch the section or pressbutton on front panel to start play.Pause (still picture)Touch the “ ” section on touchscreen during playback will stopplay temporary, touch it again toreturn the normal playback .23LUD SWF POP 11:08DISCDVD 01-0:44:36MODVOLUME- VOLUME+SELTouch the MOD section on thetouch screen (or press MODbutton ) to select the DISC mode,it display like following :Function setup(different the source the display is different)MODSubwoofer FunctionUse your finger touch the SWFsection on the screen to turn onthe Subwoofer function, touchit again to cancel function .SWFLoud FunctionTouch the LUD section on thetouch screen to switch the LoundON or OFF.LUDNote :1. In DVD mode, touch the sectioncontinually twice to back one track .(Press the button continually twice toback one track .)2. For some VCD2.0 disc (PBC-playbackcontrol), above these buttons may beunavailable .DVD/VCD/CD/MP3:Normal Playback 2x 4x 8x 16xRapid Forward/Rapid ReverseDuring DISC playback, Touch andhold (for about 2 seconds )the/ section on the touch screen(or press the / button onfront panel and hold for a morethan 2 seconds) the speed ofrapid forward/reverse changesaccording to the disc as follow:Skipping TrackDuring DISC playback, Touch the/ section on the touch screento skip to next/back one track.(You can also press the /button to skip to next/back track.)Zoom FunctionRepeatedly touch the section ofthe ZOOM, the displaying rate canbe 2x, 3x, 4x, 1/2, 1/3, 1/4 .ZOOMUse the direction keys ( / / / onremotecontrolor///ontouchscreen) to move the enlarged picture .Note: During the JPEG disc playback ,touch the screen of “ZOOM” range , the“zoom 100%” word will display, then youcan touch longer (more than 2’s) the /section on touch screen (or press the/ buttons on remote control ) tozoom in/zoom out the picture. In zoomedmode, use the direction keys to movethe enlarged picture .
Selecting The Play Modes1). Repeat FunctionTouch the screen the RPT section(or press longer RPT on remotecontrol) to select REPEAT modeas follow :FOR DVD :FOR VCD/CD/MP3 :Touch the screen the RPT section(or press longer RPT on remotecontrol) to select REPEAT modeas follow :1. Continuously repeat at the currentchapter/track, when selected REP-ONE mode .2. Select REP-ALL mode to continuouslyrepeat all chapter/track on thecurrent disc .24DISC OperationFOR CD :Touch the screen the INT section(or long press the 3/INT button onthe remote) to play the previous 6seconds part of each track/chapteron disc.(touch it again to cancel)3). INT FunctionNOTE :The 3/INT button is not available.Touch the section to select .During the Disc playback, touch thetouch screen, it will display the followingas below :During DISC playback, Touch theRDM section ( press the 4/RDMbutton longer on remote controlto play in random. Each playing,2). RDM(RANDOM) Functionthe order is different . (depend on thedisc used for VCD). Touch it again tocancel this function .FOR VCD :Touch the screen the INT section(or long press the 3/INT button onthe remote ).it display willfollowing menu as below :SELECT DIGEST TYPE:TRACK DIGESTDISC INTERVALTRACK INTERVALUse the UP, DOWN, LEFT and RIGHTarrows on the remote to select the item,and then press ENTER to confirm .(touch it again to cancel this mode .)FOR DVD :Touch the screen the INT section(or long press the 3/INT button onthe remote ). it display willfollowing menu as below :Use the UP, DOWN, LEFT and RIGHTarrows on the remote to select the item,and then press ENTER to confirm .SELECT DIGEST TYPE:TITLE DIGESTCHAPTER DIGESTTITLE INTERVALCHAPTER INTERVAL(touch it again to cancel this mode .)REPEAT ALLCHAPTER REPEAT ON TITLE REPEAT ONREPEAT OFFREPEAT ONE REPEAT ALLRPTRPTRDMINTINTINTLUD SWF POP 11:08DISCDVD 01-0:44:36MODVOLUME- VOLUME+SELDVD 11-0:44:36LUD SWF POP 11:08DISCOSDCLKDSPRDM INT RPTSWF LUD
DISC Search (GOTO)FOR DVD :Touch the screen the GOTO range(or press GOTO on the remote ).Twice, the screen will display thefollowing message :Title 01/01 Time -:--:--0:10:36You can select the item you want towatch through TIME setting by usingnumberic buttons . (E.x. 0:10:36)FOR VCD (With PBC OFF):Touch the screen the GOTO range(or press GOTO on the remote ).Once, the screen will display thefollowing message :Disc Go To --:--00:36Use the numberic buttons to input thetime directly (E.x. : 00:36)Touch the GOTO section , it display willfollowing as below :25DISC OperationAUX Operation3). You now hear the sound from theexternal device played back throughthe loudspeakers .4). Touch the volume+/- sections ontouch screen or press the VOL+/- onthe remote to adjust the volume level.1). Please connect the external devicewith stereo jack plug the Aux in socket .To connect analogue replay devices.Use this jack to replay sound of otherreplay equipment such as DVD players,computers, etc. Via the loudspeakers.Touch and hold the / section onthe touch screen , you can select thetitle or chapter of DVD . (Only for theDVD with title /chapter.)Note:7/ 9/2). Touch the MOD section on screenor press the MOD button to select theAUX IN connection. It will display thefollowing as below :GOTOGOTOGOTODISCSWF POP 11:08DVD 11-0:44:36GOTOSETTITLESUBTITLE AUDIOAUX INLUD SWF POP 11:08DISCCALL RECALLMODVOLUME- VOLUME+SELTouch to selectTitle 01 /01 , Chapter --/15543210+109/87/6AUX SocketAUX INAUX IN
26NOTE:For CD and MP3,the message willalways display on the screen.SINGLE ELAPSED SINGLE REMAIN3.Example for MP3:Each time is pressed or touch , themessage displayed on screen changesas follows:OSDE.Touch or Press for the fifth time:The message on the screen will becleared for SVCD and VCD.OSDSINGLE ELAPSEDTRACK 01/16 0:00:56SINGLE REMAINTRACK 01/16 0:05:10TOTAL ELAPSEDTRACK 01/16 0:31:36TOTAL REMAINTRACK 01/16 0:36:262.Example for VCD/SVCD/CD:A.Touch or Press for first time:OSDB.Touch or Press for second time:OSDC.Touch or Press for hird time:OSDD.Touch or Press for fourth time:OSDDISC OperationE. Touch or Press for fifth time:The message on the screen will becleared.OSDTITLE ELAPSEDT 01/01 C 01/38 0:02:06TITLE REMAINT 01/01 C 01/38 3:24:36CHAPTER ELAPSEDT 01/01 C 01/38 0:02:56CHAPTER REMAINT 01/01 C 01/38 0:04:32ON-SCREEN DISPLAY FUNCTIONDuring playback, touch the screenthe OSD section (or press the OSDon the remote), it will display thefollowing as below :1. DVD:A.Touch or Press for first time:OSDTitle Number, Total Title Number,Chapter Number, Total Chapter Numberof this Title of the disc currently beingplayed will be shown on the screen,along with the elapsed time.B.Touch or Press for second time:OSDC.Touch or Press for hird time:OSDD.Touch or Press for fourth time:OSDOSD
MONO LEFT MONO RIGHTSTEREOMIX-MONOFor VCD/CD:AUDIOAUDIOduring playback, touch thesection of the touch screen or Presson the remote . It is possible toswitch the sound between monauraland stereo sound.For DVD:If the DVD has multiple titlesrecorded on the disc. It can selectpreferred title from the title menuto start playback.For VCD:TITLE/PBCPress button on the remotecontrol while the disc is playing, you canswitch between "PBC on"and "PBC off"mode.4. Title Menu Function- During DVD playback, Touch thesection or press TITLE button on theremote .The title menu is display.- touch the cursor button shown in TVscreen, select preferred title by thecursor button and confirmed by touchENT button .TITLE27DISC Special FunctionsDVD/VCD Special FunctionDuring DVD playback. Touchthe SUBTITLE section on touchscreen(or press the SUBTITLE1. Multi-subtitle LanguageFunction (for DVD Only)Notes:- The language number is differentaccording to the disc.- Some discs only contain one subtitlelanguage.- When no different subtitle languageare recorded, will be displayedat screen left top corner.on the remote) . Each time the button ispressed or touch, number of the subtitlelanguage changes in sequential order.2. Multi-Audio Language FunctionFor DVD:During DVD playback , touchthe AUDIO section on touchscreen (or press the AUDIOon the remote .) Each time the button ispressed or touch , number of the audiosoundtrack language changes onsequential order.Notes:- The language number is differentaccording to the disc.- Some disc only contain one languagesoundtrack- When no different languagesoundtrack are recorded will bedisplay at screen left top corner.During DVD playback, touch thesection or Press ANGLE buttonon the remote . Each time thebutton is pressed or touch,number3. Multi-Angle Function(for DVD Only)of the angle changes in sequentialorder.Notes:- The angle number is differentaccording to the disc.- The function only work for disc havingscenes recorded at different angles.- When no different angle are recorded,will be displayed at screen left topcorner.SUBTITLEAUDIOTITLETouch to selectENTSWF POP 11:08DVD 11-0:44:36GOTOSETTITLESUBTITLE AUDIODISC
Setup28USING THE MENUTV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryDOLBY....GENERAL SETUP PAGE....Set TV Display ModeTV DisplayNormal/PSNormal/LBWideNormal/LBGENERAL SETUP1.TV DISPLAY SETUPThis is to select the appropriate TVaspect (4:3 or 16:9) according to theconnected TV set.Played back in the PAN & SCAN style.(If connected to wide-screen TV, theleft and right edges are cut off.)Played back in LETTER BOX style.(If connected to wide-screen TV, blackbands appear at top and bottom of thescreen.)Select when a wide-screen TV set isconnected.Normal/PS (For 4:3 TV)Normal/LB (For 4:3 TV)Wide (For 16:9 TV)16:9 4:3LetterBox4:3 Pan ScanTV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryLBONENGSPDIF/RAWONONONDOLBY....GENERAL SETUP PAGE....Go To General Setup PageOverview Of The Main MenuDOLBY()1()2()3()4(1).General Settings(2).Speaker Settings(3).DOLBY Digital Settings(4).Preference SettingsEnter Up Down Left RightPreviousTouch to selectThe Following Buttons For EnteringThe Selection .The buttons of the left and right are forselection of setting type .The buttons of the up and down are forselection of the setting program .TV Setting1. Touch the section of DVD setupon touch screen (or press the SETUPon the remote .)2.The SETUP menu is displayed.3.Select the preferred item by touch the/ / / range on the screenor by using the / / / buttons .4.Touch the ENT section on screen orPress ENTER button on remote toconfirm .SETENT
29Setup5.CAPTIONS SETUPActivate the CAPTIONS feature byselecting ON. And release this feat-ure by selecting OFF.2.ANGLE MARK DISPLAY SETUPIf it is set to ON, when the multi-angleDVD disc is playing, (the anglemark) will appears on the screen; if isset to OFF, the mark will not appear.4.SPDIF OUTPUTThis is to activate the audio outputfrom SPDIF OFF mode to SPDIF/RAWmode to SPDIF/PCM mode.TV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryDOLBY....GENERAL SETUP PAGE....Set Angle MarkONOFFONAngle MarkOSD LangTV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryDOLBY....GENERAL SETUP PAGE....Set OSD languageEnglishFrenchGermanSpanishItalianPortugueseOSD LangEnglishOSD LangTV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryDOLBY....GENERAL SETUP PAGE....Setup SPDIFSPDIF OFFSPDIF/RAWSPDIF/PCMSpdif OutputSPDIF/OFFTV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryDOLBY....GENERAL SETUP PAGE....Closed CaptionONOFFONCaptionsGENERAL SETUP3.OSD LANG TYPE SETUPTouch the / section on the touchscreen or press the / button onthe remote to select the preferredOSD language , then touch the ENTsection to confirm .LANGUAGE DISPLAYING SUBTITLES HIDING
Setup6.SCR SAVER SETUPSelect the SCR SAVER outputON/OFF.7.LAST MEMORY SETUPSelect the LAST MEMORY outputON/OFF.SPEAKER SETUPThis is to activate the audio output fromDOLBY AC3 5.1 DOWNMIX to 2 channelmode. Select the preferred SPEAKERconnection by using the cursor buttons.Select the LT/RT to activate the Dolbysurround compatible output.Select the STEREO to activate simplestereo mode.DOLBY DIGITAL SETUPDYNAMIC RANGE CONTROLSelect DRC and adjust the dynamicrange of a Doby Digital encodedprogram. There are 8 steps betweenfull compression and off compression.GENERAL SETUPTV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryDOLBY....GENERAL SETUP PAGE....Screen SaverScreen Saver ONOFFONTV DisplayAngle MarkOSD LangSpdif OutputCaptionsScreen SaverLast MemoryDOLBY....GENERAL SETUP PAGE....Set Last Memory StateONOFFONLast MemoryDOWNMIXDOLBY....Speaker Setup Page....Set Downmix ModeLT/RTSTEREODOWNMIXSTEREO....DOLBY Digital Setup....Set DRC OFFDOWNMIXDYNAMICDOLBYFULL6/84/8OFF2/8.....Speaker Setup Page.....30
SetupOSD LangPreferred Audio LanguageEnglishFrenchGermanSpanishItalianPortugueseEnglishTV TypeAudioSubtitleDisc MenuParentalPasswordDefaultDOLBY....Preference Page....Audio--- PREFERENCES PAGE ---1.TV TYPE SETUPThis player can play discs recordedin either PAL or NTSC format.SelectNTSC format, when you connected toNTSC TV.Select PAL format, whenyou connected to PAL TV.Select AUTOformat, the player TV output formatwill according to the DVD disc format..2.AUDIO LANGUAGE SETUPSelect the preferred AUDIO sound-track by using the cursor buttons.3.SUBTITLE LANGUAGE SETUPSelect the preferred SUBTITLElanguage by using the cursor buttons.4.DISC MENU LANGUAGE SETUPSelect the preferred DISC MENUlanguage by using the cursorbuttons.OSD LangTV TypeAudioSubtitleDisc MenuParentalPasswordDefaultDOLBY....Preference Page....Set TV StandardPALAUTONTSCNTSCTV TypeOSD LangPreferred Subtitle LanguageEnglishFrenchGermanSpanishItalianPortugueseOffTV TypeAudioSubtitleDisc MenuParentalPasswordDefaultDOLBY....Preference Page....SubtitleOffOSD LangPreferred Menu LanguageEnglishFrenchGermanSpanishItalianPortugueseTV TypeAudioSubtitleDisc MenuParentalPasswordDefaultDOLBY....Preference Page....Disc MenuEnglish31
Setup5.PARENTALSelect suitable parental guidance bythe cursor buttons and conformed bypressing ENTER button.6.PASSWORDSelect the change and press ENTERbutton. Type the old password (Theinitial factory code is ) and keyin 4 characters password now youwant to use, and retype again toconfirm key in correctly.13797.DEFAULTSSelect reset to become factory initialsetting.DEFAULTS TABLEGENERAL SETUPSPEAKER SETUPDOLBY DIGITALPREFERENCESTV DISPLAYANGLE MARKSPDIF OUPUTOSD LANGUAGECAPTIONSLAST MEMORYDOWNMIXDYNAMICTV TYPEAUDIOSUBTITLEDISC MENUPARENTALPASSWORDNORMAL/LBONONENGLISHONSTEREOAUTOENGLISHOFFENGLISH8 ADULT1379ONOFFSCR SAVERSPDIF/RAMOSD LangTV TypeAudioSubtitleDisc MenuParentalPasswordDefaultDOLBY....Preference Page....Set Parental Control4PG135PGR6R7NC 178ADULTOFF8ADULTParental--- PREFERENCES PAGE ---OSD LangChanged PasswordCHANGETV TypeAudioSubtitleDisc MenuParentalPasswordDefaultDOLBY....Preference Page....CHANGEPasswordOSD LangLoad Factory SettingRESETTV TypeAudioSubtitleDisc MenuParentalPasswordDefaultDOLBY....Preference Page....RESETDefaultAge control32
Bluetooth OperationBluetooth Car KitUser Manual331). Place the Car Kit and mobilehandset in 3 meters apart.3). Set your bluetooth phone to“discover” the Car Kit .Following your phone’s instructionguide for details, active your mobilehandset’s Bluetooth function, thehandset will search for accessibleBluetooth devices.4). Your phone will find this Car Kit .Select this Car Kit from the list.5). Enter passkey , then press“ ” to pair the Car Kit and thehandset, the word “ ” , willdisplay in the TFT .“8888”OKPAIR OKPrior to using the Car Kit for the fist time,you must pair it with a Bluetooth-enabledmobile handset.The following steps describes pairingthe instruction for a typical Bluetooth-enabled mobile handset.1. “Pair” To Your Bluetooth PhoneTouch the touch screen , the touchoperation menu will display.Touch the section to select the item,it will display following as below :Important:If the pairing can not be completedwithin approximately 2 minutes , whilesthe pairing mode is activated, and youwill need to reattempt pairing(See steps 2-5 above) .After pairing is completed, if theICON is stilling flash on the TFT ,please follow the steps to to reattemptpairing through your handset until theICON remains solid on the screen.Once connecting is complete, you mayaccess the following function. Some ofthe below mentioned functions onlyaccessible for handset supported withhands-free profile.2. Using The Bluetooth Car Kit.6). Select the “ ” from the liston the phone, if you connect success-fully , the ICON remains solid onthe screen , then you can operate thefunction of blue-tooth about the unite .CONNECT2). Put the Car Kit in pairing mode..a PressthePOWERbuttontoturnON,the ICON will flash on the TFT .b. Touch the section on touchscreen (or Press and hold the“PAIR/ ” button on front panel )until the word “BLUETOOTHPAIRING ” display, it’s now readyfor pairing.Touch the “ ” section on thetouch screen (or press and hold the“ PAIR/ ” button on front panel orremote control) , the word “DIALNUMBERS” will display on the TFT .then you can touch the number sectionon screen (or dial the number on theremote ) and then touch the “ ”section (or press briefly the “PAIR/ ”button on the front panel .).Make a callWhen you dials the wrong number,touch and hold the “ 8/ ” section (orpress the “ ” button on the remote)to delete it.PAIRCALLDVD 11-0:44:36LUD SWF POP 11:08DISCCALL RECALLPAIRZOOMTouch to select
During conversation in progress,tune the Volume switch until you reachthe desired volume level.Adjust the VolumeNote:Before using the function of the Blue-tooth about the unit , please check yourphone’s instruction guide or contactphone manufacture if you are not sureif your phone supports the hands-freeBluetooth function .When operating the function of blue-tooth about the unit , you need makeyour call-phone and the unit success-fully for one time. Afterwards, you onlyneed to take on the power and thefunction of blue-tooth will work in threeminutes automatically if you want tooperate the function of blue-tooth .If you want not to use the function ofthe Blue-tooth about the unit , you canselect the Bluetooth OFF .(The method to see the page 16.)34In Bluetooth menu, touch the “ ”and hold for about 2 seconds (or pressand hold the “ ” button(approximately2 seconds) on the front panel or on theremote the “DIAL LAST CALL/DIAL OUT NOW ” will display on theTFT LCD.Redial last numberRECALLBluetooth OperationIn Bluetooth menu, touch the “ ”section on screen ( or press the “ ”button briefly on the front panel or onthe remote the TFT LCD display“CALL HOOKED/CALL EJECTED” .End/Reject a callREJECTIn Bluetooth menu, touch the MODsection on the touch screen ( or pressMOD to select the “BT MUSIC”, youcan play the MP3 from your mobilehandset.Play MP3 musicNote:A2DPplease make sure it support theBluetooth profile.Answer a callAfter you hear the ring tone (the incomingtelephone number will display on theTFT LCD) .Touch the “ ”section on the touchscreen (or press the “PAIR/ ”buttonbriefly on front panel) to listen .ACCEPTDuring talking, if you want to use yourphone to listen, touch thesection (or press the “PAIR/ ” buttonon the front panel .)“”ACCEPTTouch the “ ” section on the screen,it will display like the following :CALL“ ” and “ ” serves as the “ ”and “ ” button on your mobile handset .Note:LUD SWF POP 11:08DISCBT MUSICVOLUME- VOLUME+SELMODTouch to selectDIAL NUMBERSTouch to next6543210/9/8/7DIAL NUMBERSVOLUME- VOLUME+ACCEPT REJECT
Other Main OperationImportant Note:To prevent damage to the USB device,do not remove or disconnect it duringplayback. it is also a good practice toremove the USB drive during discplayback.In USB Playback modeREPEATREPEATUse the UP, DOWN, RIGHT or LEFTbuttons to navigate to and select filesto play, and press ENTER to beginplayback (or viewing, in the case ofJPEG files). To skip to the next orlast track, touch or press the or .Press the or buttons for FastForward or Fast Reverse playback.play modes are also availableby repeatedly pushing untilthe desired mode is found.USB Operation (17)Following the diagram below, connectyour USB device to the front panelUSB port . If it is properly connected,the device will be mounted and startplaying automatically.you can also select the desired item ofthe USB device The buttons on theremote control, on the device, have thesame functions as the touch buttonsof this touch screen have ..35Changing From USB to DISC PlaybackModesIf you are in USB Playback mode andwish to begin playback of a disc alreadyin the player, touch the range on thetouch screen or press the STOP on theremote once. Then touch GOTO rangeon the screen or press the GOTO on theremote and the player will switch toDVD/VCD/CD/MP3 Playback mode.Changing From DISC to USB PlaybackModesIf the disc present in the player is anMP3 disc, touch section on screenor press the STOP on remote once thentouchorpresstheGOTOtoUSBplayback.If the disc present in the player is anDVD or VCD or CD disc, touch onthe screen or press STOP twice on theremote then touch GOTO section onthe screen or press the GOTO buttonon the remote to USB playback.TV Operation1.Connect the TV antenna to the TV.IN(from Ant) jack on the back of the unit.Switching to TV mode2.Touch the MOD section on thetouch screen (or press the modebutton on the remote to selectthe TV mode.The message will display in the monitoras follow :Touch it to select the other item .Touch it to select the other item .MODLUD SWF POP 11:08DISCTV 001MODVOLUME- VOLUME+SELSKIPLUD SWF POP 11:08DISCTV 001CALL RECALLFINE+SEARCHFINE-(USB connect line)USB port
Other Main OperationTouch it to select the other item .Touch it for previous .- The numeric button (0-9) allow you toselect the corresponding channel directly.Touch the “search” section on thetouch screen (or press the Searchbutton on the remote to starsearch channel automatically.Auto searching TV channelsIt will display the following as below:TV 036PAL-BGAUTO SCANUHFNote:In TV mode, the +10 button is not available.36SEARCHChannel ADD/DELIn TV mode ,after search channelautomatically, when you want deletethe no sign channel, touch the SKIPsection on the touch screen (or pressthe SKIP button on the remote ,thescreen display SKIP),the channel willbe deleted. Also, you can touch or pressnumeric button to select channel, thenpress SKIP to add channel(the screen display SAVE).SKIPFine TuningTouch the “fine+/fine- ” section onthe touch screen (or press /button on the remote) to fine tunethe current channel .FINE-FINE+Dub systemBriefly Touch the SEL section on touchscreen (or press SEL knob on panel) toselect the TV standard by repeatedlytouch SEL section.you can use the VOL+/- to select amongof the “PAL-BG, PAL-DK, PAL-I, PAL-M” ,“PAL-N”, “NTSC”, “SECAM-BG” ,“SECAM-DK .”It will display following as below :LUD SWF POP 11:08TV: PAL-BGMODVOLUME- VOLUME+SELSKIPTouch to selectTouch to adjustLUD SWF POP 11:08TV 001543210SKIP6798DISCLUD SWF POP 11:08DISCTV 001DSP CLKPAIRSWFLUDSelecting channelTouch “ ” section on screen (orPress the “ ” button on remote)to choose the channel upwardTouch “ ” section on screen (orPress the “ ” button on remote)to choose the channel downward
Other Main OperationREP-ONE:Play the same song over and over again.1.When inserting an MP3/WMA/JPEG/MPEG4 disc.Ex: When MP3 file is detected.00:56 04:07003/112Repeat oneMp3Mp3Mp3..............KPwoman 1new ton123456 .Current track(file)(highlighted bar).Elapsed playing time of the currenttrack(.total playing time..Operation mode icon. (Play),(stop), (pause), (forward)(reverse)..Current track (file) number/totalnumber of tracks(files) in the currentfolder.not available for JPEG disc)( not available forJPEG disc).Selected playback mode123564Touch the screen, it will display the following as below :when the parking brake is applied .()Touch the RPT on the touch screen (or Pressing REPEAT button on the remote)repeatedly can select two kinds of repeat play mode.Touch the / / / sections on touch screen (or Use / / / on remotecontrol ) to select the item or folder, then touch the ENT section (or press ENTERbutton on remote) to confirm.MP3/WMA/JPEG/MPEG4 DISC PLAY37DISCSWF POP 11:08MP3 01-0:44:36MODVOLUME- VOLUME+SEL Touch repeatedly/REP ALL:Play all songs in the discover and over again.In the playback, touch the or section to skip an item ahead or back.In the playback, touch and hold the / sections on touch screen for about 2seconds to rapid forward/reverse .(You can also press the / button on the front panel and keep more than 2seconds or short press on the remote control to rapid forward/reverse.)MP3 01-0:44:36ENT
Audio Signal Output: 2ch&4ch line outCharacteristics: (1)Frequency Response 20 Hz - 20 KHz(2)S/N Ratio 90 dB (JIS)(3)Wow and Flutter Below measurable limitsSpecification38TFT Monitor:Monitor Screen Size: 4.3 Inch WideNumber of Pixels: 480 X 3(RGB) X 272 pixelsColor System: NTSC/PALNOTE: Specifications and design are subject to modification, without notice,due to improvements in technology.RADIO Section: For 3 Bands For 2 Bands For 2 Bands(Europe) (Europe) (U.S.A.)FM FM FMFrequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHzIF: 10.7 MHz 10.7 MHz 10.7 MHzSensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBuMW MW AMFrequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHzIF: 450 KHz 450 KHz 450 KHzSensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBuLW(Optional)Frequency Coverage: 144 to290 KHzIF: 450 KHzSensitivity (S/N = 20 dB): 45 dBuSupply Voltage: 12V DC (11V-15V)Current Consumption: Less than10 ASignal System: Compositive video 1.0Vp-p 75Discs Played: (1)DVD-VIDEO Disc5"(12 cm) single-sided, single-layer5"(12 cm) single-sided, double-layer(2)Compact Disc (CD-DA, VIDEO CD)5"(12cm) discTV Section :TV System: NTSC/PAL/SECAMTV Sensitivity:BLUETOOTH:Bluetooth specification: V1.2 Class 2Bluetooth profile supported: Headset, Handsfree and A2DP profilesRange of frequency: 2.4GHz Spectrum
888-J4300-16SBefore going through the check list, check wiring connection. If any of the problemspersist after check list has been made, consult your nearest service dealer.Trouble Shooting39Inserting the disc in reversedirectionPress the RESET button.Front panel is not properly fixedinto its placeThe car ignition switch isnot onIf the power supply is properlyconnected to the car accessoryterminal,switch the ignition keyto "ACC"The fuse is blown Replace the fusePresence of disc inside theplayer.Remove the disc in the player,then put a new oneInsert the compact disc withthe label facing upwardThe disc is extremely dirtyor defectiveClean the disc or try to play anew oneTemperature inside the caris too highCool off or until the ambienttemperature return to normalThe built-in microcomputeris not operating properlydue to noiseThe antenna cable is notconnected Insert the antenna cable firmlyThe signals are too weak Select a station manuallySYMPTOM CAUSE SOLUTIONTelevision/videoimageappearsblack-whiteThe color system isset incorrectly Please switch to correct colorsystem from menuNo television/videoimage appearsThe unit is not connectedto the parking brakedetection switchMake proper connectionaccording to wire connection“”The parking brake is notengagedFor safety reasons no television/video images are displayed whilethe vehicle is moving.Engaging the parking brake willcause images to be displayed.The operation keysdo not workThe radio does notworkDisc can not beloaded or ejectedNo powerNo color in picture Thediscformatisnotaccordingto the TV-setused (PAL/NTSC)Please the television mode ofthe choice accommodationJPEG disc cannot be playedbackNo JPEG files are recordedon the disc.JPEG files are not recordedin a compliant formantChange the discRecord JPEG files using acompliant applicationChange the disc

Navigation menu