Greenwave Reality d b a Greenwave Systems E2100 Wi-Fi Extender User Manual Greenwave E2100 User Guide v7

Greenwave Systems Pte. Ltd. Wi-Fi Extender Greenwave E2100 User Guide v7

Contents

User Manual rev.pdf

Download: Greenwave Reality d b a Greenwave Systems E2100 Wi-Fi Extender User Manual Greenwave E2100 User Guide v7
Mirror Download [FCC.gov]Greenwave Reality d b a Greenwave Systems E2100 Wi-Fi Extender User Manual Greenwave E2100 User Guide v7
Document ID3469670
Application ID0bIG4Wa1fwH0GL1uNFGZaw==
Document DescriptionUser Manual rev.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize22.85kB (285679 bits)
Date Submitted2017-07-18 00:00:00
Date Available2017-09-25 00:00:00
Creation Date2017-06-29 17:48:14
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2017-07-03 14:55:00
Document TitleMicrosoft Word - Greenwave E2100_User_Guide_v7
Document CreatorPScript5.dll Version 5.2.2
Document Author: jepeng

Wi‐Fi Extender
USER GUIDE
Model: E2100
Copyright © 2016 Greenwave Systems. All Rights Reserved.
CONTENTS
01/
INTRODUCTION
1.1
Package Contents
1.2
System Requirements
1.3
Features
1.4
Getting to Know Your Wi‐Fi Extender
02/
CONNECTING YOUR WI‐FI EXTENDER
2.1 Setting Up Your Wi‐Fi Extender
3/
Troubleshooting
3.1
Status Lights
3.2
Troubleshooting Tips
4/
NOTICES
4.1 Regulatory Compliance
Copyright © 2016 Greenwave Systems. All Rights Reserved.
4.2 FCC Notice
Copyright © 2016 Greenwave Systems. All Rights Reserved.
01/
INTRODUCTION
1.1 Package Contents
1.2 System Requirements
1.3 Features
1.4 Getting to Know Your Wi‐Fi Extender
The Wi‐Fi Extender is a high performance, dual‐band, tri‐radio, 801.11ac range
Booster built for outstanding Wi‐Fi performance between the primary Access
Point/Router/Gateway and forward connected, downstream clients. The
Extender is designed to work with existing network router/gateway infrastructure
products, such as the upcoming Quantum BHR5 and the existing Quantum BHR4
Copyright © 2016 Greenwave Systems. All Rights Reserved.
PACKAGE CONTENTS, SYSTEM REQUIREMENTS
AND FEATURES
1.1/ PACKAGE CONTENTS
Your package contains:
• The Greenwave Systems Wi‐Fi Extender
• Power Adapter
• Quick Start Guide
• Safety and License notice(s)
Package Contents
Network Wi-Fi Booster with Stand
Power Adapter
Quick Start Guide
GPL GNU Notice
1.2/ SYSTEM REQUIREMENTS
System requirements are:
• A supported BHR Gateway/Router, such as the Quantum BHR4 or
Quantum BHR5
• Client devices supporting either Wi‐Fi or Ethernet network
connectivity (not provided)
Copyright © 2016 Greenwave Systems. All Rights Reserved.
1.3/ FEATURES
• Dual 5GHz Radios provide fast connection to your gateway/router and
to your Wi‐Fi connected clients
• Wi‐Fi Extender will to attempt to automatically connect to your
Quantum BHR4 or Quantum BHR5 without manual configuration
by the customer
• Signal Strength Indicators let you know if the Wi‐Fi extender is in an
optimal location for best performance
• Includes Integrated wired networking with 2‐port Ethernet switch
• Connect PCs or Game Consoles over high‐speed Wired Ethernet
connection
• Ethernet supports speeds up to 1000 Mbps
• Integrated wireless networking with 802.11b/g/n/ac access point
featuring:
• Enabled 802.11b capable speeds (based on device)
• Enabled 802.11g capable speeds (based on device)
• Enabled 802.11n capable speeds (based on device)
• Enabled 802.11ac capable speeds (based on device)
• Event logging
Copyright © 2016 Greenwave Systems. All Rights Reserved.
1.4/ GETTING TO KNOW YOUR WI‐FI EXTENDER
1.4a/ FRONT PANEL
The front panel has a lighted indicator (LED)
status button, which also provides the a WPS
(Wi‐Fi Protected Setup) function.
The Power/Internet light will be on and solid
when your Wi‐Fi Extender is turned on,
connected to a BHR router and functioning
normally.
For additional information on the front lights
and error indications, refer the Troubleshooting
section in this Guide.
The WPS button is used to initiate Wi‐Fi
Protected Setup. Pressing the front Unified
Button for 10 seconds will initiate a WPS pairing
setup event.
See Troubleshooting section for additional details.
Copyright © 2016 Greenwave Systems. All Rights Reserved.
1.4b/ REAR PANEL
The rear panel of your Wi‐Fi Extender has two (2) Ethernet ports. The
rear panel also includes a DC power jack, a reset button and three
Placement Indicator status LEDs.
• Reset Button ‐ allows you to reset your Wi‐Fi Extender to the factory
default settings. To reset the Wi‐Fi Extender, press and hold the
Reset button for at least three seconds.
Copyright © 2016 Greenwave Systems. All Rights Reserved.
• Ethernet LAN ‐ connects devices to your Wi‐Fi Extender using Ethernet
cables to join the local area network (LAN). The two Ethernet LAN
ports are 10/100/1000 Mbps auto‐sensing and can be used with
either straight‐through or crossover Ethernet cables.
• Power ‐ connects your Wi‐Fi Extender to an electrical wall outlet using
the supplied power adapter. Warning: The included power adapter
is for home use only, supporting voltages from 100‐240Vac. Do not use
in environments with greater than 240Vac.
Copyright © 2016 Greenwave Systems. All Rights Reserved.
02/
2.1/ SETTING UP YOUR WI‐FI EXTENDER
Connecting your Wi‐Fi Extender to extend your
Wi‐Fi network is simple.
There are three basic steps to setting up your Wi‐Fi Extender:
Step1: Power on.
Step 2: Connect the Wi‐Fi Extender to a BHR
Step 3: Connect your device to the Wi‐Fi Extender
Detailed Steps:
2.1/ Step 1 – Power On
a)
Remove your Wi‐Fi Extender and power adapter from the box.
b)
Plug in the Power Adapter pin jack into the circular port on the
back of the Wi‐Fi Extender.
c)
Plug the power cord into the power port on the back of your Wi‐Fi
Extender and then into a power outlet. The Wi‐Fi Extender
Copyright © 2016 Greenwave Systems. All Rights Reserved.
automatically turns on as soon as power is plugged in.
Important: Wait until the Status light on the front of the Wi‐Fi Extender stops
flashing and is solid white. If the light turns yellow or red, check the trouble‐
shooting steps in the Troubleshooting section of the user guide.
2.1/ STEP 2 ‐ CONNECT THE WI‐FI EXTENDER TO A BHR GATEWAY
Autoconfigure
• The Wi‐FI Extender will first attempt to automatically configure to a
Quantum BHR4 or Quantum BHR5 during.
• If automatic configuration was successful, the Unified Button light in
the front of the Wi‐Fi Extender will turn White.
Wi‐Fi Protected Setup (WPS)
• Press and hold the Unified Button in the front of the Wi‐Fi Extender
for 2‐5 seconds, then release. The button will flash Blue if WPS
setup has been initiated.
• If WPS configuration was successful, the Unified Button light in the
front of the Wi‐Fi Extender will turn White.
If the Unified Button light in the front of the Wi‐Fi extender is yellow or
red, there is a problem with the Wi‐Fi Extender or with the connection
to the Gateway/Router. See Troubleshooting section for more
information.
Copyright © 2016 Greenwave Systems. All Rights Reserved.
2.1/ STEP 3 ‐ CONNECT YOUR DEVICE TO YOUR WI‐FI EXTENDER
If connecting a device using wired Ethernet
• Plug one end of an Ethernet cable (not supplied) into one of the two
yellow Ethernet ports in the back of your Wi‐Fi Extender.
• Plug the other end of the Ethernet cable into the Ethernet port of
your network device.
If connecting a wireless device:
• Access the Wi‐Fi setting on your wireless device, then select your
home network name (SSID). The home network SSID should be
shown on the sticker located on the side of your gateway/router.
• Enter the wireless password (WPA2 key) also shown on the sticker of
the home/gateway router.
Copyright © 2016 Greenwave Systems. All Rights Reserved.
3/
TROUBLE SHOOTING
This chapter lists solutions for issues that
may be encountered while using your Wi‐Fi
Extender.
3.1/ STATUS LIGHTS
3.1a/ UNIFIED BUTTON STATUS LIGHT
(LOCATED ON THE FRONT OF WI‐FI EXTENDER):
Condition
Status
LED color
Wi-Fi Booster (WFB)
Normal Operation (solid)
Booster bootup (fast blink)
White
Normal
Blue
WPS Pairing Mode (slow blink)
(2-5 sec hold)
Grey
Wi-Fi off
Yellow
Trouble
Red
Green
OFF
No Connection to BHR4/5
Hardware Failure (solid)
Overheat (fast blink)
WPS Failure (1s on, 1s off, for upto 120 seconds)
Not In Use
Powered off
Copyright © 2016 Greenwave Systems. All Rights Reserved.
1.
The first thing to check is whether your Wi‐Fi Extender is powered
on.
2.
When powered on and starting up, the Wi‐Fi Extender Status light
will blink White.
3.
If the Unified Button status light is yellow, then be sure your Wi‐Fi
Extender wireless device is within range of your Gateway or
Router.
4.
Refer to the Placement Indicator lights on the BACK of the Wi‐Fi
Extender.
3.1b/ PLACEMENT INDICATOR LIGHTS
(LOCATED ON THE BACK OF WI‐FI EXTENDER):
5.
If “Too Far” is lit solid Red, then try moving the Wi‐Fi Extender
CLOSER to the BHR Gateway/Router.
6.
If “Too Close” is lit solid red, then try moving the Wi‐Fi Extender
AWAY from the BHR Gateway/Router.
Copyright © 2016 Greenwave Systems. All Rights Reserved.
3.2/ TROUBLESHOOTING TIPS
1.
If the Unified Button Status light is solid red, the Wi‐Fi Extender is
powered on but is having a hardware issue. Try unplugging the
power cable, and wait three (3) minutes before re‐inserting the
power plug again.
2.
If the Unified Button Status light is flashing red, the Wi‐Fi Extender
is powered on but is having a hardware overheat issue. You
should unplug the Wi‐Fi Extender, and wait at least three (3)
minutes before attempting to power on again. Upon powering‐on,
if the light continues to flash red, then you should unplug the
device and leave it off. Please call the technical support
department of your service provider.
3.
Check to be sure you are running the latest software for your
network device.
4.
Try turning your network device’s Wi‐Fi off and on and try to
connect.
5.
If you have made any changes in your network settings and
turning your network device’s Wi‐Fi off and on does not help, try
to restart your network device.
6.
As a final tip you may need to turn your Wi‐Fi Extenders’ Wi‐Fi
settings from on to off, and back to on again and apply the
changes.
Copyright © 2016 Greenwave Systems. All Rights Reserved.
4/
NOTICES
This chapter lists various compliance and modification notices,
including FCC and GPL.
4.1a/ FCC CLASS B EQUIPMENT
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by
implementing one or more of the following measures:
1.
Reorient or relocate the receiving antenna
2.
Increase the separation between the equipment and receiver
3.
Connect the equipment to an outlet on a circuit different from the
one to which the receiver is connected
4.
Consult the dealer or an experienced radio or television
Copyright © 2016 Greenwave Systems. All Rights Reserved.
technician for help
4.1b/ MODIFICATIONS
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Greenwave may void the user’s authority to operate the equipment.
Declaration of conformity for products marked with the FCC logo –
United States only.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1.
This device may not cause harmful interference
2.
This device must accept any interference received, including
interference that may cause unwanted operation
Note: To comply with FCC RF exposure compliance requirements, the
antenna used for this transmitter must be installed to provide a
separation distance of at least 32 cm from all persons and must not be
co‐located or operating in conjunction with any other antenna or
transmitter.
For operation within the 5.15 ~ 5.25 GHz / 5.47 ~ 5.725 GHz frequency
range, this device is restricted to indoor environments. This device
meets all the other requirements specified in Part 15E, Section 15.407
of the FCC Rules.
For questions regarding your product or the FCC declaration, contact:
Greenwave Systems Inc
200 Spectrum Center Drive, 15th Floor (Suite 1500),
Irvine, CA 92618
Attn: FCC Declaration
Copyright © 2016 Greenwave Systems. All Rights Reserved.
Caution: The Wi‐Fi Extender must be installed inside the home. The
Router is not designed for exterior (outside) installation.
4.2/ GENERAL PUBLIC LICENSE
This product contains certain software code that is developed by
third parties, including software code subject to the GNU General
Public License (“GPL”) or GNU Less General Public License (“LGPL”).
Copies of the licenses and a downloadable copy of the source code
for the open source software that is used in this product are
available on the following website:
http://www.greenwavesystems.com/opensource/
You may also obtain a copy of the source code used in this product via
mail‐in request, for a period of three years after initial date of
product purchase. For details and mailing address, please visit
http://www.greenwavesystems.com/opensource/
All open source software contained in this product is distributed
WITHOUT ANY WARRANTY. All such software is subject to the
copyrights of the authors and to the terms of the applicable licenses
included in the download.
NOTE: This information is provided for those who wish to edit or
otherwise change such programs. You do not need a copy of any of such
open source software source code to install or operate the device.
Note: This information is provided for those who wish to edit or
otherwise change such programs. You do not need a copy of any of such
Copyright © 2016 Greenwave Systems. All Rights Reserved.
open source software source code to install or operate the device.
Copyright © 2016 Greenwave Systems. All Rights Reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2017:07:03 14:55+08:00
Create Date                     : 2017:06:29 17:48:14+08:00
Metadata Date                   : 2017:07:03 14:55+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Greenwave E2100_User_Guide_v7
Creator                         : jepeng
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:c4ce5fa0-97c3-4359-8bb3-9faee74750f0
Instance ID                     : uuid:33ef7d4c-fb04-46bb-9e0a-db421ae743ea
Page Count                      : 19
Author                          : jepeng
EXIF Metadata provided by EXIF.tools
FCC ID Filing: Z3M-E2100

Navigation menu