Grid Connect BLE300SMTINT GC-BLE300-SMT-INT User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3123960
Application ID	h9EyKI4Yu1CXUae0DYB1iA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75kB (937446 bits)
Date Submitted	2016-09-06 00:00:00
Date Available	2016-09-11 00:00:00
Creation Date	2016-02-04 08:33:38
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-09-06 17:05:14
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Macintosh)

SMT BLE Module Industrial Temperature
(GC-BLE300-BGA)
•
•
•
•
•
•
•
•
•
•
•
•
•
Features:
Description:
Surface Mount BLE (Bluetooth
4.2) Embedded Module
Low cost and Compact Wireless
Networking Device (Size 13 x 18
mm)
Internal Chip Antenna
High Speed UART Data Interface
UART Interface is +1.8V
Compatible and Supports Free/
Auto Frame Function
BLE, Bluetooth Classic and Bluetooth Audio Protocols
Maximum of XX BLE Connections
128-bit AES-CCM Data Encyption
MCU available to run your custom
software
Mesh-capable (coming in 2016)
+1.8 - 4.2Vcc Power Supply (30
mA (peak)
Customizable via SDK
FCC/CE Certi ied
The low cost GC-BLE300-BGA Embedded BLE Module provides support for
Bluetooth 4.2 networking for a printed circuit board device design. The compact
module is a high performance feature rich surface mount (SMT) embedded
module. For optimal performance, the GC-BLE300-BGA has an internal PCB
antenna. (See the table on the reverse side for a summary of the GC-BLE300BGA ordering options.)
* SDK Required
Based on the Marvell 88MB300 SoC, the GC-BLE300-BGA is a feature-rich
module that can provide Bluetooth support for an exisiting CPU or can host an
application on the module. Interface with the GC-BLE300-BGA via GPIOs or
high speed UART. Configure the device with Marvell’s BLE development toolkit
(contact Grid Connect for more information). The GC-BLE300-BGA can support
BLE, Bluetooth Classic and Bluetooth Audio.
With a small footprint, low cost, and a rich feature set, the GC-BLE300-BGA Embedded WiFi Module is well suited for many applications. The module is small
enough to be added to handheld devices. With an industrial temperature range,
the GC-BLE300-BGA can be used in devices designed for harsh environments.
Multiple antenna options allow the GC-BLE300-BGA to be added to existing
device designs or to provide engineers with the design flexibility to meet specific
application requirements. The GC-BLE300-BGA is a member of a complete line
of Embedded Modules provided by Grid Connect. Need a smaller device size,
lower power, SPI interface? Grid Connect can help pick the best embedded
module to meet your needs.
Development is done via our GC-BLE300-BGA-EVK which brings out all the
pins and interfaces on the module to allow for quick development.
1630 W. Diehl Road, Naperville, IL 60563

Phone: +1 (630) 245-1445

USA Toll Free: +1 (800) 975-4743
gridconnect.com
Specifications:
Security
128-bit Encyption
Data Rates
UART: 1200 bps - 230400 bps
Frequency Band
2.4 GHz
Encryption
AES-CCM
Power
1.8 - 4.2 Vcc Current: ~ mA ( 30 mA Peak)
Dimensions
13mm x 18mm x 3 mm SMT
Interfaces
Wireless: Bluetooth Serial: UART, GPIO - Up to 32*
Protocols
BLE, Bluetooth Classic, Bluetooth Audio (Bluetooth 4.2)
Antenna Options
Chip antenna
Product Weight
0.1 lb
User Configuration
AT Commands
Network Type(s)
Piconet, Scatternet
Firmware
Upgradeable via OTA
Interfaces
•
•
•
Certifications
FCC, CE
Application Software
Custom software via SDK (contact Grid Connect for more information)
Marvell BLE Toolkit
Connector(s)
40-pin SMT Package
Temperature Range
Operating: -40ºC to +85ºC (-40ºF to +185ºF)
Storage: -45ºC to +125ºC (-40ºF to +185ºF)
(2) UART
(2) I2C
(2) SSP/SPI
* Requires customization via SDK
Contact Us:
GC-BLE300-BGA Ordering Summary
GC-BLE300-BGA
SMT Package, Internal PCB Antenna
GC-BLE300-BGA-EVK
BLE300 SMT Eval Kit
Call for Volume Pricing
Grid Connect Inc.
1630 W. Diehl Road
Naperville, IL 60563
Phone: +1 (630) 245-1445
USA Toll Free: +1 (800) 975-4743
Fax: +1 (630) 245-1717
Email: sales@gridconnect.com
Website: gridconnect.com
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any
portable device, for example, USB dongle like transmitters is forbidden.
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular
must be installed and operated with a minimum distance of 20 cm between the radiator and user body.
If the FCC identification number is not visible when the module is installed inside another device, then the outside
of the device into which the module is installed must also display a label referring to the enclosed module. This
exterior label can use wording such as the following: “Contains Transmitter Module FCC ID:
2AFC3BLE300SMTINT or Contains FCC ID: 2AFC3BLE300SMTINT”
when the module is installed inside another device, the user manual of this device must contain below warning
statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the
user documentation that comes with the product

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2016:02:04 08:33:38-06:00
Metadata Date                   : 2016:09:06 17:05:14+08:00
Modify Date                     : 2016:09:06 17:05:14+08:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:ad6cc04d-c81d-44c8-9b28-2bb884251d5d
Original Document ID            : xmp.did:2e87a10c-74db-b648-b3da-ad9ab2f75b41
Document ID                     : xmp.id:8b8a36fe-1e3a-4bde-a548-1d3af2fb58f3
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7e69d32f-c3d8-4b7a-bda2-35283b2d1097
Derived From Document ID        : xmp.did:1c0129f1-6642-4917-b7c0-2b7d8e012ada
Derived From Original Document ID: xmp.did:2e87a10c-74db-b648-b3da-ad9ab2f75b41
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2016:02:04 08:33:38-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CC 2015 (Macintosh)

EXIF Metadata provided by EXIF.tools