Grid Connect CSSO2 Smart Outlet User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3948671
Application ID	gjH6LLzAQDDaJM+hGN02IQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.68kB (658454 bits)
Date Submitted	2018-08-02 00:00:00
Date Available	2018-08-02 00:00:00
Creation Date	2015-05-28 10:27:15
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2018-08-01 16:07:13
Document Title	User Manual
Document Creator	Adobe InDesign CC 2014 (Macintosh)

Smart Outlet
Getting Started
1. Plug In Your Smart Outlet
2. Wi-Fi Settings
• Go to the Settings app and tap Wi-Fi
• Scroll to the bottom under “SET UP NEW DEVICE…”
		 and select your Smart Outlet. It will be listed as 			
		 ConnectSense Outlet-XXXXXX
• This will take you to the accessory set up screen where
		 your primary Wi-Fi network will be selected by default. 		
		 Select this or enter an alternate Wi-Fi network
3. Download App + Sign In
• Download the ConnectSense app from the App Store or 		
		connectsense.com/app
• Follow the steps to create a ConnectSense account or
		 sign in to your existing account
4. Add Device and Enter HomeKit Pin to Pair
• Click the + in the upper right hand corner to add a
		 new device
• Select ConnectSense Outlet-XXXXXX
• Enter your HomeKit Pin located on the back of your
		 outlet or on the card included in the box to complete the 		
		 pairing process
Questions?
If you have questions about installing your Smart Outlet,
visit connectsense.com/support or call +1 (800) 975-4743.
End User License
For more details on the ConnectSense end user license go to
connectsense.com/eula
Warranty
The ConnectSense Smart Outlet is covered by a One Year Limited Warranty.
Details are available at connectsense.com/warranty
©2015 Grid Connect Inc.
ConnectSense.com
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:05:28 10:27:15-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2018:08:01 16:07:13+08:00
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2018:08:01 16:07:13+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:6ab183b6-59eb-41f4-9871-08fa0df7d893
Original Document ID            : xmp.did:1f77786c-0a9d-4192-91cd-53039685fa9c
Document ID                     : xmp.id:e63b7c06-d1e8-45d8-992c-59ac330f035a
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:05:28 10:27:15-05:00
Derived From Instance ID        : xmp.iid:79a56eb9-3f58-4f6e-8ad1-633d5d586f06
Derived From Document ID        : xmp.did:1f77786c-0a9d-4192-91cd-53039685fa9c
Derived From Original Document ID: xmp.did:1f77786c-0a9d-4192-91cd-53039685fa9c
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 5

EXIF Metadata provided by EXIF.tools