Grid Connect ESP32P001 BLE + WLAN Module User Manual
Grid Connect Inc. BLE + WLAN Module Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4006852 |
| Application ID | TGdHXPncq4uxGTo76hIxCg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.63kB (257895 bits) |
| Date Submitted | 2018-09-14 00:00:00 |
| Date Available | 2018-09-14 00:00:00 |
| Creation Date | 2018-08-23 16:03:16 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-09-06 09:57:40 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CC 13.0 (Macintosh) |
GC-ESP32-PORT-N • • • • • • • • • Features: Description: Wi-Fi/BLE 4.2 Ethernet RMii Serial - UART for TTL, RS232, RS422, RS485 - SPI, I2C, I2S Embedded ESP32-D2WQ main processor chip 2 MB SPI flash embedded 540 KB SRAM 2 CPU cores that can be controlled individually Adjustable clock frequency 80 MHz to 240 MHz FCC/IC certified The GC-ESP32-PORT is a family of embedded networking modules that allow the user to create a customized modular solution for all of their networking requirements. The GC-ESP32-PORT modules are all based on the powerful ESP32 processor. The ESP32 processor has all the communication interfaces required to implement today’s wired and wireless standards; these include: Wi-Fi, BLE, Ethernet, UART (RS232, RS485), I2C, I2S, and SPI. Each module has different communication hardware and software options that are available for use. Communication Interfaces • Wi-Fi • BLE • RMii • SPI, I2S, I2C • I/O • UART (RS232, RS422, RS485) Wi-Fi, BLE Having a combination of BLE, and Wi-Fi on board makes the modules suitable for a variety of wireless networks, allowing for both Wi-Fi based internet connections and local BLE connections to a smart phone or tablet. RMii TBD Processor The ESP32 has two CPU cores that can be individually controlled and a clock frequency that is adjustable from 80 MHz to 240 MHz. The ESP32 also has a sleep mode processor that allows for sleep current of less than 5 µA, making it suitable for battery powered applications. Grid Connect, Inc. FCC ID: 2AFC3ESP32P001 IC: 22503-ESP32P001 Software / Firmware The GC-ESP-PORT component utilizes the free RTOS operating system (now owned by Amazon/ AWS) with LwIP and a built-in TLS 1.2 with hardware acceleration. It also offers secure, encrypted over-the-air (OTA) updates so that the module firmware can be updated remotely without manual or physical intervention. The AWS cloud extensions provide an application interface (API) for developers that want to implement cloud applications. Model: GC-ESP32-PORT-N This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference recieved, including interference that may cause undesired operation. Grid Connect has made available for the GC-ESP32-PORT family different firmware and hardware that allows the user to use for standard applications: • Serial tunneling between the UART and Wi-Fi • Serial tunneling between the UART and Ethernet • Bridging between Wi-Fi and Ethernet • Basic AWS cloud connection • Custom firmware available Le présent appareil est conforme aux CNR d’industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit acceptar tout brouillage radioélectrique subi, mȇme si le brouillage est suseptible d’en compromette le fonctionnement. Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1630 W. Diehl Road, Naperville, IL 60563 If you wish to develop your own software/firmware there is a standard SDK with many options for your application. The development environment for ESP32 is available on-line and is open source and free. Phone: +1 (630) 245-1445 USA Toll Free: +1 (800) 975-4743 gridconnect.com Specifications: Security / Protection WPA/WPA2/WPA2-Enterprise/WPS AES/RSA/ECC/SHA Power Supply 3.3 V / 500 mA Frequency Band Wi-Fi frequency: 2.4 GHz ~ 2.5 GHz Interface(s) RMii, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR GPIO, capacitive touch sensor, ADC, DAC, LNA pre-amp Network IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT Protocols Wi-Fi: • A-MPDU and A-MSDU aggregation and 0.4 µs guard interval support • 802.11 b/g/n/e/i (802.11n up to 150 Mbps) BLE: • BLE 4.2 Core Power ESP32-D2WQ contains two low-power Xtensa® 32-bit LX6 microprocessors Dimensions 0.55 x 0.65x 0.25 inches Certifications FCC/IC, CE Software Software Development: Supports Cloud Server Development/SDK for custom firmware development Application Firmware UART Download/ OTA (via network)/ download and write firmware via host. (Application firmware will not affect radio parameters.) Antenna External U.FL/IPEX RF Connector Temperature Range Operating: -40 ºC to 85ºC (-40ºF to 185ºF) Contact Us: Ordering Summary GC-ESP32-PORT-N (Networking Daughter Processor Board) Grid Connect Inc. 1630 W. Diehl Road Naperville, IL 60563 Phone: +1 (630) 245-1445 USA Toll Free: +1 (800) 975-4743 Fax: +1 (630) 245-1717 Email: sales@gridconnect.com Website: gridconnect.com Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Déclarationd'exposition aux radiations: Cetéquipementestconforme aux limitesd'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps OEM Integration Instructions ： This device is intended only for OEM integrator under the following conditions. The module can be used as certified in a host product if: 1. The antenna is installed such that 20 cm is maintained between the antenna and any end user. 2. The transmitter module and antenna are not co-located with any other transmit or antenna. 3. The module is only used with the antenna(s) originally tested and certified with this module. As long as 3 conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirement with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). The final end product must be labeled in a visible area with the following: Contains FCC ID: 2AFC3ESP32P001, IC: 22503-ESP32P001 The GC-ESP32-PORT-N may only be used with the following antennas: Antenna Type Manufacturer Frequency Range Maximum Peak (MHz) Antenna Gain (dBi) Whip V.TORCH VTWFA-3 2400-2480 3dBi Trace Airgain N2420 2400-2480 3.8dBi any 50 Ohm antenna of the same type and frequency range, with equal or lesser gain. IMPORTANT NOTE： In the event that the above conditions cannot be met (for example certain device configuration or co-location with another transmitter), then the FCC / ISED authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID / IC number of the module cannot be used on the final product. In these and circumstance, the OEM integrator will be responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 3 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Create Date : 2018:08:23 16:03:16-05:00 Metadata Date : 2018:08:24 10:11:40-05:00 Creator Tool : Adobe InDesign CC 13.0 (Macintosh) Modify Date : 2018:09:06 09:57:40-05:00 Instance ID : uuid:08456e5b-4e56-47de-b1f8-3be7f4ea6654 Original Document ID : xmp.did:2e87a10c-74db-b648-b3da-ad9ab2f75b41 Document ID : xmp.id:430dc38b-b085-49f1-8b60-577ab823e413 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:4b450559-7351-4319-9961-4059d5d0c919 Derived From Document ID : xmp.did:bc9ed73a-4492-4cce-859c-ea7a7a2e70e8 Derived From Original Document ID: xmp.did:2e87a10c-74db-b648-b3da-ad9ab2f75b41 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Macintosh) History Changed : / History When : 2018:08:23 16:03:16-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Tagged PDF : Yes Language : en-US Creator : Adobe InDesign CC 13.0 (Macintosh)EXIF Metadata provided by EXIF.tools