Griffin Technology 9690 iTrip Nano User Manual New TC Manual

Griffin Technology Inc. iTrip Nano New TC Manual

user manual

PresetsiTrip will remember the last 3 stations that you’ve used, and will allow youto select any of them easily as a preset. Press the NAV switch IN twice toget to the Presets Screen. From there, press UP or DOWN to move theindicator to your choice and press IN to select it.PreferencesSince your iTrip is useful in lots of different real-world situations, we’vebuilt in a lot of options.Press and hold the NAV switch IN to access the Preferences menu. There are 4 preferences and they’re easy to change. Move the NAV switch UP or DOWN until the indicator is on the preference you'd like to change, then press the switch IN to make the selection. Try them out and see what works best for you.Mono or Stereo: Press the NAV switch IN three times for this screen. iTrip’s selectable Stereo or Mono modes allow you to adjust for the best possible audio signal. In large cities with radio stations crowding the dial, iTrip’s Mono mode gives a stronger signal. Some audio content sounds the same in either Stereo or Mono, so you may want to select Mono mod sometimes for a cleaner sound.EQ, AutoPlay: Press the NAV switch IN four times for these preferences.EQ: This option gives your iTrip the best general-purpose equalizationsetting for FM. If you'd like to enhance the sound quality of your iTripsimply turn this option ON.AutoPlay: With AutoPlay ON, iTrip immediately starts playing your first iPodplaylist or your currently selected track as soon as it is connected. AutoPlayis enabled by default.Quick Start GuideThank you for purchasing Griffin iTrip for iPod nano. The iTrip you hold inyour hands is a slim FM transmitter designed specifically for use with 2ndGeneration iPod nano as introduced by Apple in late 2006.Getting StartedGetting started with iTrip is easy. Just slip your iPod nano on to the iTripsled until it is fully seated. All of iTrip’s controls are literally at yourfingertips, and iTrip uses Griffin’s SmartDisplay technology to show youtuning and preference information right on the bright clear screen of your iPod.iTrip’s 3-way navigation (NAV) switch makes it simple to change settings.The NAV switch moves 3 ways: UP, DOWN and IN. Pressing UP or DOWN willhighlight an item in an iTrip menu, and pressing IN will lock in your selection.iTrip will automatically exit its setup menus after 4 seconds and return youto your previous place in your iPod display.Choosing a FrequencyOn your FM receiver, select an FM frequency that plays nothing but static,with no audio in the background. The ideal choice would be a frequency withnothing playing on any of the neighboring frequencies. When in doubt, 88.1is usually a good choice.Transmitting Your MusicWith your iPod nano fully seated in the iTrip sled, press play on your iPod.iTrip will begin broadcasting. To check the broadcasting frequency, press INon iTrip’s NAV switch. The nano’s screen will now display the frequency atwhich iTrip is currently broadcasting. Move the NAV switch UP or DOWN toselect a frequency matching the one you chose on your radio. Press the NAVswitch IN to confirm your selection.P963_2G iTrip_sled_QS2.ai02/06/07 145pmSDAdditional FeaturesDistortionFree™ TechnologyDuring broadcast, you'll want to set the volume of your iPod to around 65% of maximum for the best signal. If you turn the volume up too high, Griffin'sDistortionFree™ Technology automatically reduces the volume on your iPod to keep your music playing without distortion.Low Power ModeFor convenience, iTrip is powered by your iPod's battery. To help conserve battery power when not in use, iTrip will automatically shut itself off after 2 minutes of silence. iTrip will also go to sleep when you put your iPod to sleep (by holding down the PLAY/PAUSE button).Dimensions: 1.57" x 3.97" x 0.55" (40mm x 10mm x 14.3mm)Weight: 0.9 oz.Antenna: Built-InPower: Supplied by iPod connectionModulation: FM StereoOscillator: High-Stability Crystal, Phase-Lock Loop ControlFrequency Response: 50 Hz to 15 kHzOperating Range: 20 ft (6.1m)14 1 23432Warning: You maydamage your iTrip byremoving your iPodnano in this manner!Install and removeyour iPod nano inthis manner.Griffin Technology9690-NANOTRIP2This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received,including interference that may cause undesired operation. . 3-Way touch navigation button . Status light . Dock connector . 1/8“ (3.5mm) headphone jack/adapter . USB mini-B port© 2007 Griffin Technology • www.griffintechnology.comiTrip is a registered trademark of Griffin Technology. • iPod is a trademark of Apple, Inc., registered in the U.S. and other countries. • Patent Pending • Made in China • Designed in Tennessee1 YEAR WARRANTYWe stand behind every product with the industry’s best customer service, backed by a simple, fair warranty. Using this product signifies your acceptance of the terms of the warranty, so please read our warranty details at www.griffintechnology.com/support/ before using your Griffin product.®Play your iPod nano through any FM radioiPodBBAADDEECCThe manufacturer is not responsible for any radio or tv interference caused by unauthorized modificationsto this equipment. Such modifications could void the user’s authority to operate the equipment.

Navigation menu