Grizzly G0599 G0596/G0597/G0598/G0599 User Manual To The F88e37d9 8c7d 0464 0919 640d838feaa4

User Manual: Grizzly G0599 to the manual

Open the PDF directly: View PDF .
Page Count: 32

Download
Open PDF In Browser	View PDF

MODEL
G0596/G0597/G0598/G0599
INDUSTRIAL BENCH GRINDER
OWNER'S MANUAL

COPYRIGHT © JANUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC7907 PRINTED IN TAIWAN

�����������������������������������������������������������������������
��������������������������������������������������������������
����������������������������������������������������������������������
��������������������������������������������������������������������
������������������������
������������������������������������������������������������������
��������������������������������������������������������������������
�����������������������������������������������������������������
����������������������������������������������������������������������
���������������������������������������������������������������������
�����������������������������������������������������
�����������������������������������������������������������������������
��������������������������������������������������������������������

��������������������������������������������������������������������
��������������������������������������������������������������������
�������������������������������������������������������������������
�������������������������������������������
�� ����������������������������
�� ������������������������������������������������������������������
�� ����������������������������������������������������
������������������������������������������������������������������
������������������������������������������������������������������
��������������������������������������������������������������������
���������������������������������������������������������������������
��������������������������

Table of Contents

INTRODUCTION ............................................................................................................................... 2
Foreword .................................................................................................................................... 2
Contact Info ................................................................................................................................ 2
Machine Data Sheet................................................................................................................... 3
Identification ............................................................................................................................... 3
SECTION 1: SAFETY ....................................................................................................................... 4
Safety Instructions for Machinery ............................................................................................... 4
SECTION 2: CIRCUIT REQUIREMENTS ........................................................................................ 7
Operation.................................................................................................................................... 7
Grounding................................................................................................................................... 8
Extension Cords ......................................................................................................................... 8
Phase Converter ........................................................................................................................ 8
SECTION 3: SET UP ........................................................................................................................ 9
Set Up Safety ............................................................................................................................. 9
Items Needed for Set Up ........................................................................................................... 9
Unpacking .................................................................................................................................. 9
Inventory................................................................................................................................... 10
Eye Shields .............................................................................................................................. 10
Hardware Recognition Chart .................................................................................................... 12
SECTION 4: OPERATIONS ........................................................................................................... 13
Operation Safety ...................................................................................................................... 13
Wheel Care .............................................................................................................................. 14
Wheel Selection ....................................................................................................................... 14
Wheel Inspection ...................................................................................................................... 15
Wheel Replacement ................................................................................................................. 16
SECTION 5: ACCESSORIES ......................................................................................................... 17
SECTION 6: SERVICE ................................................................................................................... 18
Troubleshooting........................................................................................................................ 18
110V Wiring Diagram G0596 ................................................................................................... 19
Single Phase ............................................................................................................................ 19
220V Wiring Diagram G0597/G0598 ....................................................................................... 20
Single Phase ............................................................................................................................ 20
220V Wiring Diagram G0599 ................................................................................................... 21
3-Phase .................................................................................................................................... 21
Parts Breakdown Main ............................................................................................................. 22
Parts Breakdown Shield ........................................................................................................... 23
Parts List G0596-G0597 .......................................................................................................... 24
Parts List G0598-G0599 .......................................................................................................... 25
WARRANTY AND RETURNS ........................................................................................................ 26

INTRODUCTION
Foreword

Contact Info

We are proud to offer the Model G0596/G0597/
G0598/G0599 Industrial Bench Grinder. This
machine is part of a growing Grizzly family of fine
metalworking machinery. When used according
to the guidelines set forth in this manual, you can
expect years of trouble-free, enjoyable operation
and proof of Grizzly’s commitment to customer
satisfaction.

If you have any comments regarding this manual,
please write to us at the address below:

We are pleased to provide this manual with the
Model G0596/G0597/G0598/G0599. It was written to guide you through assembly, review safety
considerations, and cover general operating procedures. It represents our effort to produce the
best documentation possible.

We stand behind our machines. If you have any
service questions or parts requests, please call or
write us at the location listed below.

The specifications, drawings, and photographs
illustrated in this manual represent the Model
G0596/G0597/G0598/G0599 as supplied when
the manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no obligation on the part of Grizzly. For your convenience,
we always keep current Grizzly manuals available
on our website at www.grizzly.com. Any updates
to your machine will be reflected in these manuals
as soon as they are complete. Visit our site often
to check for the latest updates to this manual!

-2-

Grizzly Industrial, Inc.
/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069

Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com

G0596-G0599 Industrial Bench Grinders

MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901

MODEL G0596/G0597/G0598/G0599
G0596

G0597

G0598

11⁄2

110, 1-PH

220V, 1-PH

220V, 3-PH

Amps

14A

8.5A

12A

10A

RPM

1800

1200

Wheel Size

8 x 1 x 1"

10 x 1 x 1"

12 x 1 ⁄2 x 1 ⁄4"

12 x 2 x 11⁄4"

Wheel Type

Type 1

1 ⁄4"

11⁄4"

Height

181⁄2"

22"

Width

24"

30"

Depth

16"

17 ⁄2"

19"

Dust Port Diameter

2 ⁄2"

Net Weight

118 Lbs.

132 Lbs.

220 Lbs.

226 Lbs.

Shipping Weight

140 Lbs.

155 Lbs.

264 Lbs.

270 Lbs.

28 x 20 x 16"

28 x 22 x 18"

34 x 24 x 20"

Motor HP
Voltage/Phase

Arbor Size

Shipping Dimensions

G0599
3

1200
1

Identification
D

B
C

G
E

F
A. Lighted Eye Shield (to be used WITH safety
glasses and face shield)
B. Grinding Wheel
C. Tool Rest
G0596-G0599 Industrial Bench Grinders

D.
E.
F.
G.

ON/OFF Switch
Wheel Safety Guard
Coolant Cup
Dust Port
-3-

SECTION 1: SAFETY
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This
manual uses a series of symbols and signal words which are intended to convey the level of
importance of the safety messages. The progression of symbols is described below. Remember
that safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about
proper operation of the machine.

Safety Instructions for Machinery
1.

READ THROUGH THE ENTIRE MANUAL
BEFORE STARTING MACHINERY.
Machinery presents serious injury hazards
to untrained users.

ALWAYS USE HEARING PROTECTION
WHEN OPERATING MACHINERY.
Machinery noise can cause permanent
hearing damage.

ALWAYS USE ANSI APPROVED
SAFETY GLASSES WHEN OPERATING
MACHINERY. Everyday eyeglasses only
have impact resistant lenses—they are
NOT safety glasses.

WEAR PROPER APPAREL. DO NOT
wear loose clothing, gloves, neckties, rings,
or jewelry which may get caught in moving
parts. Wear protective hair covering to contain long hair and wear non-slip footwear.

ALWAYS WEAR AN ANSI APPROVED
RESPIRATOR WHEN OPERATING
MACHINERY THAT PRODUCES DUST.
Wood dust is a carcinogen and can cause
cancer and severe respiratory illnesses.

NEVER OPERATE MACHINERY WHEN
TIRED, OR UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL. Be mentally alert
at all times when running machinery.

-4-

G0596-G0599 Industrial Bench Grinders

Safety Instructions for Machinery
7.

ONLY ALLOW TRAINED AND PROPERLY SUPERVISED PERSONNEL TO
OPERATE MACHINERY. Make sure
operation instructions are safe and clearly
understood.

KEEP CHILDREN AND VISITORS AWAY.
Keep all children and visitors a safe distance from the work area.

MAKE WORKSHOP CHILD PROOF. Use
padlocks, master switches, and remove
start switch keys.

10. NEVER LEAVE WHEN MACHINE IS
RUNNING. Turn power OFF and allow all
moving parts to come to a complete stop
before leaving machine unattended.
11. DO NOT USE IN DANGEROUS
ENVIRONMENTS. DO NOT use machinery in damp, wet locations, or where any
flammable or noxious fumes may exist.
12. KEEP WORK AREA CLEAN AND WELL
LIT. Clutter and dark shadows may cause
accidents.
13. USE A GROUNDED EXTENSION CORD
RATED FOR THE MACHINE AMPERAGE.
Undersized cords overheat and lose power.
Replace extension cords if they become
damaged. DO NOT use extension cords
for 220V machinery.
14. ALWAYS DISCONNECT FROM POWER
SOURCE
BEFORE
SERVICING
MACHINERY. Make sure switch is in OFF
position before reconnecting.
15. MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
16. MAKE SURE GUARDS ARE IN PLACE
AND WORK CORRECTLY BEFORE
USING MACHINERY.

G0596-G0599 Industrial Bench Grinders

17. REMOVE ADJUSTING KEYS AND
WRENCHES. Make a habit of checking for
keys and adjusting wrenches before turning machinery ON.
18. CHECK FOR DAMAGED PARTS
BEFORE USING MACHINERY. Check
for binding and alignment of parts, broken
parts, part mounting, loose bolts, and any
other conditions that may affect machine
operation. Repair or replace damaged
parts.
19. USE RECOMMENDED ACCESSORIES.
Refer to the instruction manual for recommended accessories. The use of improper
accessories may cause risk of injury.
20. DO NOT FORCE MACHINERY. Work at
the speed for which the machine or accessory was designed.
21. SECURE WORKPIECE. Use clamps or
a vise to hold the workpiece when practical. A secured workpiece protects your
hands and frees both hands to operate the
machine.
22. DO NOT OVERREACH. Keep proper footing and balance at all times.
23. MANY MACHINES WILL EJECT THE
WORKPIECE TOWARD THE OPERATOR.
Know and avoid conditions that cause the
workpiece to "kickback."
24. ALWAYS LOCK MOBILE BASES
(IF USED) BEFORE OPERATING
MACHINERY.
25. BE AWARE THAT CERTAIN DUST MAY
BE HAZARDOUS to the respiratory systems of people and animals, especially
fine dust. Make sure you know the hazards
associated with the type of dust you will be
exposed to and always wear a respirator
approved for that type of dust.

-5-

Additional Safety Instructions for Grinders
1.

EYE PROTECTION. Grinding ejects small
particles at a high rate of speed. ALWAYS
wear safety glasses when using this
machine.

MOUNTING TO BENCH/STAND. An unsecured grinder may become dangerously
out of control during operation. Make sure
grinder is FIRMLY secured to a bench/
stand before use.

WHEEL SPEED RATING. Wheels operated at a faster speed than rated for
may break or fly apart. Before mounting a new wheel, be sure the wheel
RPM rating is equal or higher than the
speed of the grinder.

WHEEL FLANGES. Only use the flanges
included with the grinder when mounting
wheels. Other flanges may not properly
secure the wheel and cause an accident.

RING TEST. Perform a "ring test" on grinding wheels before installation to ensure
that they are safe to use. A wheel that does
not pass the ring test may break or fly apart
during operation.

STARTING GRINDER. If a wheel is damaged, it will usually fly apart shortly after
start-up. To protect yourself, always stand
to the side of the grinder when turning it
ON and allow it to run a full minute before
standing in front of it.

Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to lessen the possibility of operator injury. If normal safety
precautions are overlooked or ignored, serious personal injury may occur.
-6-

LUNG PROTECTION. Grinding produces
hazardous dust, which may cause longterm respiratory problems. Always wear a
NIOSH–approved dust mask or respirator
when grinding.

SIDE GRINDING. Grinding on the side of
wheels can cause the them to break and
fly apart—unless the wheel is rated for side
grinding.

TOP GRINDING. Grinding on the top
of wheels greatly increases the risk of
workpiece kickback. Always grind on the
downward part of the wheel.

10. HAND/WHEEL CONTACT. Grinding
wheels can remove a lot of skin fast. Keep
a firm grip on the workpiece and position
your hands a safe distance away when
grinding. DO NOT wear gloves as they
may get caught in the grinding wheel and
cause even more serious injuries.
11. TOOL REST POSITION. If the tool rest is
too far away from the wheel, the workpiece
may be pulled down, causing loss of control and pulling your hand into the grinding
wheel. Keep the tool rest within 1⁄8" from the
wheel when operating.
12. CRACKED WHEEL. Cracked wheels
may break and fly apart during operation.
Replace cracked wheels immediately!

No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious personal injury, damage to equipment, or poor
work results.
G0596-G0599 Industrial Bench Grinders

SECTION 2: CIRCUIT REQUIREMENTS
Operation

Plug Type

Serious personal injury could occur if you
connect the machine to the power source
before you have completed the set up process. DO NOT connect the machine to the
power source until instructed to do so.

Amperage Draw

With the exception of the G0596, the cord set
enclosed does not have a plug as the style of plug
you require will depend upon the type of service
you currently have or plan to install. We recommend using the following plugs for your machine
on a dedicated circuit only (see Figures 1–3 for
examples):
G0597 at 220V ......................... NEMA 6-15 Plug
G0598 at 220V ......................... NEMA 6-15 Plug
G0599 at 220V 3-Phase.. NEMA 15-15R Plug or
..220V Locking Shut-Off Switch (recommended)

The motor for your machine may draw the following amps at maximum load.
G0596 at 110V Single-Phase ............... 14
G0597 at 220V Single-Phase .............. 8.5
G0598 at 220V Single-Phase ............... 12
G0599 at 220V 3-Phase....................... 10

Amps
Amps
Amps
Amps

Circuit Requirements
We recommend connecting this machine to a
dedicated circuit with a verified ground, using the
circuit breaker size given below. Never replace a
circuit breaker with one of higher amperage without consulting a qualiﬁed electrician to ensure
compliance with wiring codes. If you are unsure
about the wiring codes in your area or you
plan to connect your machine to a shared circuit, you may create a fire hazard—consult a
qualified electrician to reduce this risk.
G0596 at 110V ................15
G0597 at 220V ...............15
G0598 at 220V ...............15
G0599 at 220V 3-Phase.15

Amp
Amp
Amp
Amp

Circuit
Circuit
Circuit
Circuit

Figure 1. NEMA 6-15 plug and receptacle.
��������
����������

Breaker
Breaker
Breaker
Breaker
�������
��������
������
�������������

Figure 2. NEMA 15-15R plug and receptacle.

G0596-G0599 Industrial Bench Grinders

-7-

Grounding
In the event of an electrical short, grounding
reduces the risk of electric shock. The grounding
wire in the power cord must be properly connected to the grounding prong on the plug; likewise,
the outlet must be properly installed and grounded. All electrical connections must be made in
accordance with local codes and ordinances.

Figure 3. A locking shut-off switch near the
machine.

Extension Cords
We do not recommend the use of extension
cords. Instead, arrange the placement of your
equipment and the installed wiring to eliminate
the need for extension cords.
If you find it absolutely necessary to use an extension cord with your machine, the extension cord
must also contain a ground wire and plug pin.

110V Operation
Use at least a 12 gauge cord that does not exceed
50 feet in length!

220V Operation
This machine must have a ground prong in
the plug to help ensure that it is grounded.
DO NOT remove ground prong from plug
to fit into a two-pronged outlet! If the plug
will not fit the outlet, have the proper outlet
installed by a qualified electrician.

Use at least a 12 gauge cord that does not exceed
50 feet in length!

Phase Converter
When using a phase converter for 3-phase, the
power from the manufactured power leg (sometimes called the wild wire) can fluctuate. Connect
the manufactured power leg to the S terminal to
prevent damage. The wire from the S terminal can
handle some fluctuation because it goes directly
to the motor. The power going to the R and T
terminals goes to the transformer and must be
consistent to prevent damage.

-8-

G0596-G0599 Industrial Bench Grinders

SECTION 3: SET UP
Set Up Safety
This machine presents
serious injury hazards
to untrained users. Read
through this entire manual to become familiar with
the controls and operations before starting the
machine!

Wear safety glasses during the entire set up process!

The Model G0596/G0597/
G0598/G0599 is a heavy
machine. DO NOT overexert yourself while
unpacking or moving
your machine—get assistance.

Items Needed for
Set Up
The following items are needed to complete the
set up process, but are not included with your
machine:
Description
Qty
•
Wrench or Socket 12mm............................ 1
•
Wrench or Socket 8mm.............................. 1
•
Safety Glasses (for each person) .............. 1
•
Phillips Screwdriver #2 ............................... 1
•
Assistant .................................................. 1-2

Unpacking
The Model G0596/G0597/G0598/G0599 was
carefully packed when it left our warehouse. If
you discover the machine is damaged after you
have signed for delivery, please immediately call
Customer Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condition of your shipment, you should inventory the
contents.

G0596-G0599 Industrial Bench Grinders

-9-

Inventory

Mounting

After all the parts have been removed from the
box you should have the following items:

Mount the grinder on the optional H7834 stand
(see Page 17), or a workbench that is sturdy
enough to hold the weight of the machine and
any downward pressure that may be applied during operation.

Box 1:
Qty
A. Grinder ....................................................... 1
B. Wrench 25mm (G0596/G0597) .................. 1
C. Wrench 50mm (G0598/G0599).................. 1

NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
Check these locations before assuming that
any items from the inventory list are missing.

The stand or workbench should be level, rigid,
and attached to the floor, so it will not move during operation.
For proper safety, drill holes in your workbench
and secure the grinder with hex bolts, washers,
and hex nuts, or with lag screws and flat washers. (Mounting hardware is not provided due to
the many possible set ups and workbench thicknesses.)
When locating your grinder, remember:

Eye Shields
The eye shields on the Model G0596/G0597/
G0598/G0599 may come pre-mounted from the
factory. If they do not, attach them at this time with
the two Phillips head screws provided.

Light Switch

Mounting Screws

•

You will need room for potentially large
workpieces.

•

Maintain easy access to dust ports for attaching dust collection system.

•

Grinding without dust collection system
spreads dust in the immediate vicinity of the
grinder.

•

Grinding creates flying sparks that MUST be
out of reach of any flammables.

•

You will need a lot of light around the
grinding wheel in addition to the lighted eye
shields.

Figure 4. Eye shield.

DO NOT operate this grinder without the eye
shields or wheel guards in place. Failure
to properly use these safety devices could
lead to serious injury!

-10-

G0596-G0599 Industrial Bench Grinders

Dust Collection

Test Run
The test run ensures that the grinder and grinder
wheels were not damaged during shipping.

DO NOT operate the Model G0596/G0597/
G0598/G0599 without an adequate dust collection system. This grinder creates substantial amounts of dust while operating. Failure
to use a dust collection system can result in
short and long-term respiratory illness.
The Model G0596/G0597/G0598/G0599 features
a dust port at the rear of the grinding wheel. If a
dust collection system is not attached, both ports
have spark deflectors that direct sparks downward.
To connect a dust collection hose:
1.

Remove the spark deflector.

Fit the dust hose over the dust port, as
shown in Figure 5, and secure in place with
a hose clamp.

Tug the hose to make sure it does not come
off. Note: A tight fit is necessary for proper
performance.

Spark Deflector

To test run the grinder:
1.

Review and understand all grinder safety
information.

Remove the wheels and closely inspect the
overall conditions. Follow this by performing
a "Ring Test" (see Wheel Inspection on
Page 15 and Wheel Replacement on Page
16).

Plug the grinder into the power source.

Put on safety glasses and face shield.

Stand to the side of the line of the wheels
rotation, turn the grinder ON, and allow it to
run a least one minute, before standing in
front of it.
—The grinder should run smoothly.
—Grinding wheels should run true without
noticeable vibration.
—If there is an obvious problem with the way
the grinder is running, turn it OFF immediately and troubleshoot the problem, using
the troubleshooting table on Page 18. DO
NOT operate the grinder until it is fixed.

Dust Port
Figure 5. Dust port.

FIRE AND EXPLOSION HAZARD! DO NOT
attach dust ports to a dust collection system
designed or used for wood dust collection.
G0596-G0599 Industrial Bench Grinders

-11-

Hardware Recognition Chart

-12-

G0596-G0599 Industrial Bench Grinders

SECTION 4: OPERATIONS
Operation Safety
Damage to your eyes, lungs, and ears could
result from using this machine without proper protective gear. Always wear safety glasses with face shield, a respirator, and hearing
protection when operating this machine.

Loose hair and clothing could get caught in
machinery and cause serious personal injury. Keep
loose clothing and long
hair away from moving
machinery.

NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY RECOMMEND that you read books, trade magazines, or get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.

G0596-G0599 Industrial Bench Grinders

Grinding Tips
The grinder is a safe tool when used properly. In
addition to the safety instructions in this manual,
the most important safety consideration is to use
common sense at all times. What may be okay in
one situation, may not be safe in another.
Here are some tips to keep in mind while
grinding:
•

DO NOT grind on the side of the wheel.
The wheels provided with the Model G0596/
G05967/G0598/G0599 are not designed for
side grinding. Grinding on the side greatly
stresses the wheel and may cause it to shatter.

•

Wear the proper protective clothing. Particles
flying off of a grinding wheel will be traveling very fast—prepare for this. Wear safety
glasses/face shield, a dust mask, earplugs,
a leather apron, and heavy leather boots.

•

Make sure all guards are in place.

•

Remember that grinding often produces
sparks. DO NOT allow anyone to stand in
the path of the sparks. DO NOT grind near
flammable materials.

•

Maintain proper care of your wheels. Read
the Wheel Care on Page 14.

•

Grasp the workpiece firmly and properly
support it on the tool rest during grinding.
Maintain even pressure and control of the
workpiece when grinding.

•

Concentrate on the task at hand. STOP
grinding if you are distracted.

•

DO NOT grind workpieces that are heavier
than the wheel itself. This stresses the
wheel. In these cases use a handheld grinder instead.
-13-

Wheel Care

Wheel Selection

Your safety when grinding depends, on a large
part, on the condition of the wheel during grinding. A wheel in poor condition presents the possibility of breaking apart during rotation and injuring
the operator and others in the area.

The Model G0596/G0597 only accepts Type 1
wheels with a 1" bore. The Model G0598/G0599
only accepts Type 1 wheels with a 11⁄4" bore.

Here are some tips to help you avoid breaking
the wheel:
•

•

Always transport, store and handle wheels
with care. Wheels may be damaged if they
are dropped or if heavy objects are stacked
on them.
Select the right grinding wheel for the job.
DO NOT grind material inappropriate for the
wheel type.
Select the right wheel for the machine. A
machine that rotates at a higher RPM than
the wheel is rated for may cause the wheel
to fly apart.

•

Mount the wheels properly. (See the Wheel
Replacement instructions on Page 16 for
guidance.)

•

Do not abuse the wheel by jamming the work
into the grinding wheel with excessive force
that causes the grinder to bog down, or apply
pressure to stop the wheel after turning the
grinder OFF.

•

Dress the wheel when necessary. Do not
allow it to become glazed.

•

Always spin water/coolant out of the wheel
before turning the grinder OFF. This may
take 5–10 minutes. (If moisture is left on the
wheel, the wheel may warp.)

•

Do not store wheels in damp or wet locations.

•

Do not grind on the side of the wheel unless
wheel is designed for side grinding.

•

-14-

Do not overtighten the nut when mounting
the wheel.

Aluminum oxide and silicon carbide wheels are
marked in a somewhat uniform manner by all the
major manufacturers. Understanding these markings will help you understand the capabilities of
various wheels. Always refer to the manufacturer’s grinding recommendations when selecting a
wheel for your project.
The basic format for wheel numbering is:
Prefix
1

Abrasive
Grit Size
Type
A

Grade

Bond
Type

The Prefix is the manufacturer’s designation for a
particular wheel type (eg, Type 1 wheels).
The most common Abrasive Types used are A
for Aluminum Oxide, C for Silicon Carbide, and
occasionally SG for Seeded Gel.
The Grit Size is a number that refers to the size
of the abrasive grain in the wheel. The lower the
number, the coarser the wheel. Ten is a very
coarse wheel for roughing and 220 is usually the
upper range for fine finish work.
Grade is an indication of the hardness of the
wheel—“A” being the softest and “Z” being the
hardest.
Bond Type refers to the type of bonding material
used to hold the abrasive material. Most general
purpose wheels will have a “V” indicating Vitrified
Clay is used. Vitrified Clay provides high strength
and good porosity. The other common bond type
is “B” for resin where synthetic resins are used.
These are used to grind cemented carbide and
ceramic materials.
Note: There may be other numbers inserted that
have meaning for a particular type of wheel. Refer
to the manufacturer’s technical data for a complete explanation.
G0596-G0599 Industrial Bench Grinders

Wheel Inspection
Before mounting a new grinding wheel, it must
be inspected. Do not assume that a wheel is in
sound condition just because it is new—often
damage can occur in shipping, with age, or with
exposure to moisture.
First, do a Visual Inspection. Look for any
cracks, chips, nicks or dents in the surface of the
wheel. If you see any of these, DO NOT use the
wheel.
Second, do a Ring Test. This test will give you an
indication of any internal damage that may not be
obvious during a visual inspection.
To perform a Ring Test:
1.

Make sure the wheel that you test is clean and
dry; otherwise, you may get false results.

If size permits, balance the wheel with your
finger in the hole. If this is not possible, hang
the wheel in the air with a piece of cord or
string looped through the hole in the center.

At the spots shown in Figure 6, gently tap
the wheel with a light non-metallic device
such as the handle of a screwdriver or a
wooden mallet.

An undamaged wheel will emit a clear metallic ring or “ping” sound in each of these spots.
A damaged wheel will respond with a dull
thud that has no clear tone.

If you determine from the ring test that the
wheel is damaged, DO NOT use it!

Wheel Dressing
Depending on the type of grinding you do, the
grinding wheel may require periodic dressing.
There are several different types of wheel dressing devices available on the market (see Page
17). Dressing restores the abrasive quality of the
wheel surface and brings the wheel edge back to
a square form.
Refer to the instructions that accompany your
dressing accessory for complete details on how
to properly dress a wheel.

Note: Finding the exact spot to tap will take
several attempts.

����

��������������
������������������������������
���������������������������������������
������
��������
�����

�������
�������
��������������

�������

�������������������������
����������������������������
�����������������������

Figure 6. Tapping locations when performing a
ring test.
G0596-G0599 Industrial Bench Grinders

-15-

Wheel Replacement

�����������

�����

�
���

�

���

��
��

��������

��
�
�

��

����

ALWAYS visually inspect and perform a
“ring test” on a wheel before assembly. DO
NOT use damaged wheels!

�
��

��

�
���

����

The wheel guard must be removed in order to
mount or dismount a grinding wheel.
To replace a grinding wheel:
1.

UNPLUG THE GRINDER!

Remove the wheel guard.

Use a wrench on the arbor nut. Hold the
wheel from turning with your other hand.
Note that the wheel on the left-hand side of
the machine has left-handed threads, so the
arbor nut on that side must be turned clockwise to loosen.

Remove the outer wheel flange and the
paper disc. Pull the wheel free from the
arbor. There will also be a paper disc and a
wheel flange on the other side of the wheel.

Mount the new wheel as shown in Figure
7. Always make certain there is a paper or
fiber disc between the wheel flanges and
the wheel itself. Tighten the nut snugly but
DO NOT over-tighten. Over-tightening can
crack the wheel (see Figure 8).

Figure 7. Assembly order for wheel installation.

Arbor Nut

Figure 8. Nut removal/tightnening.
6.

Re-install the wheel guard.

Run a new wheel for at least one minute
while standing clear of the line of rotation. If
a wheel does have defects it will generally fail
within that time.

NEVER assemble a grinding wheel on the
arbor without paper or fiber discs between
the wheel and the flange. Not using the
discs can put stress on the wheel, causing
it to crack and possibly fall apart.

-16-

G0596-G0599 Industrial Bench Grinders

ACCESSORIES

SECTION 5: ACCESSORIES
G0596 Replacement Wheels
Model H8880—8 x 1 x 1" Al Oxide 24 Grit
Model H8881—8 x 1 x 1" Al Oxide 36 Grit

Model H7834—341⁄2" Stand for Industrial
Bench Grinders.

G0597 Replacement Wheels
Model H8882—10 x 1 x 1" Al Oxide 24 Grit
Model H8883—10 x 1 x 1" Al Oxide 36 Grit

G0598 Replacement Wheels
Model H8884—12 x 11 ⁄ 2 x 11 ⁄4" Al Oxide 24 Grit
Model H8885—12 x 11 ⁄ 2 x 11 ⁄4" Al Oxide 36 Grit

G0599 Replacement Wheels
Model H8886—12 x 2 x 11 ⁄4" Al Oxide 24 Grit
Model H8887—12 x 2 x 11 ⁄4" Al Oxide 36 Grit

Model H5891—1 ⁄4 Carat Diamond Dresser
Model H5892— 3 ⁄4 Carat Diamond Dresser

Model H5944—#0 Wheel Dresser
Model H5945—#1 Wheel Dresser
Model H5946—#2 Wheel Dresser

Model G3446—Accu-Sharp Jigs
Model G4570—Accu-Sharp Stubby Chisel Jig

H5892
H5891

G0596-G0599 Industrial Bench Grinders

-17-

SECTION 6: SERVICE
Review the troubleshooting and procedures in this section to fix your machine if a problem develops. If you
need replacement parts or you are unsure of your repair skills, then feel free to call our Technical Support
at (570) 546-9663.

Troubleshooting
Motor & Electrical
Symptom

Possible Cause

Possible Solution

Motor will not start.

1. Low voltage.

1. Check power line for proper voltage.

2. Open circuit in motor or loose connections.

2. Inspect all lead connections on motor for loose or open

Motor will not start; 1. Short circuit in line cord or plug.
fuses or circuit
breakers blow.
2. Short circuit in motor or loose connections.

1. Inspect cord or plug for damaged insulation and shorted

connections.
wires.
2. Inspect all connections on motor for loose or shorted terminals or worn insulation.
Motor overheats.

3. Incorrect fuses or circuit breakers in power line.

3. Install correct fuses or circuit breakers.

1. Motor overloaded.

1. Reduce load on motor.

Motor stalls (result- 1. Short circuit in motor or loose connections.
ing in blown fuses
or tripped circuit).
2. Low voltage.
3. Incorrect fuses or circuit breakers in power line.
Machine
slows
when operating.

Correct the low voltage conditions.

3. Install correct fuses or circuit breakers.

4. Motor overloaded.

4. Reduce load on motor.
1. Use less pressure when grinding.
1. Make sure machine is securely mounted on a solid surface.
2. Use a holding device to firmly retain the workpiece.

3. Wheel face uneven.

3. Dress the grinding wheel.

4. Wheel is too hard.

4. Use softer wheel, or reduce the feed rate.

1. Impurity on wheel surface.

1. Dress the grinding wheel.

2. Workpiece not being held tightly.

2. Use a holding device to firmly retain the workpiece.

Burning
spots 1. Improper type of grinding wheel.
or cracks in the 2. Improper feed rate.
workpiece.

Wheel dulls quickly,
grit falls off.

or worn insulation.
2

1. Operator is using too much pressure.

Wav y
condi- 1. Machine vibrating.
tion on surface of
workpiece.
2. Workpiece not being held firmly.

Lines on surface of
workpiece.

1. Inspect connections on motor for loose or shorted terminals

1. Try a wheel which is softer style or a coarser grit.
2. Slow down the rate of movement of the workpiece into
wheel.

3. Coolant required.

3. Add optional coolant system or introduce coolant by hand.

1. Depth of cut too great.

1. Slow down the rate of movement of the workpiece into
wheel.

2. Wheel is too soft.

2. Wheel too soft for the material being ground, select harder

3. Wheel diameter too small.

3. Replace the wheel.

4. Bad wheel dress.

4. Dress the wheel.

5. Defective wheel bonding.

5. Consult manufacturer of grinding wheel.

bond.

-18-

G0596-G0599 Industrial Bench Grinders

110V Wiring Diagram G0596
Single Phase
���������
�

�

����� ���������������

�

����� ���������������

�

����� ���������������

�

��� ��������������������

�

���������������
�

�

�
�

�

������
����������������������

���������
����

�

���
�

�

��

��
��
�

�

G0596-G0599 Industrial Bench Grinders

-19-

220V Wiring Diagram G0597/G0598
Single Phase
���������
�

�

����� ���������������

�

����� ���������������

�

����� ���������������

�

��� ��������������������

�

�
�

���������������

�
�

�

�
�
�

������
����������������������

���������
����

�
�

�

���
�
�

�

��

��
��
�

�

-20-

G0596-G0599 Industrial Bench Grinders

220V Wiring Diagram G0599
3-Phase
���������
�

�
�

�

�
�

����� ���������������

�

����� ���������������

�

����� ���������������

�

��� ��������������������

�

���������������

�

�
�

������
����������������������

���������
����
�

�

���
�

�
�

� �

��

��
��
�

�

G0596-G0599 Industrial Bench Grinders

-21-

�

-22-

��

�

��

�

��

�

��

��
��
��

��
��

��

�

��

���

��

�

��

�

��

�

��

Parts Breakdown Main

G0596-G0599 Industrial Bench Grinders

Parts Breakdown Shield
�����
�����
����
�����

�����

����

�����

����
�����

����
�����
�����
����

�����

����
�����

����
�����
�����

Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. If any label is
removed or becomes unreadable, REPLACE that label before using the machine again. Contact
Grizzly at (800) 523-4777 or www.grizzly.com to order new labels.
G0596-G0599 Industrial Bench Grinders

-23-

Parts List G0596-G0597
REF

PART #

DESCRIPTION

REF

PART #

DESCRIPTION

H7834

STAND (OPTIONAL)

12-17

P0596012-17

LAMP COVER

P0596002

MOTOR 1HP,110,1PH (G0596)

12-18

P0596012-18

SPECIAL WASHER

2-1

P0596002-1

CAPACITOR 30MFD-250VAC

12-19

PW08

FLAT WASHER #8

P0597002

MOTOR 1.5HP, 220V,1PH (G0597)

P0596013

SWITCH BRACKET

2-1

P0597002-1

CAPACITOR 50MFD-250VAC

P0596014

SPARK HOOD

P0596003

WHEEL GUARD, RIGHT (G0596)

P0596015

TOOL REST SUPPORT

P0597003

WHEEL GUARD, RIGHT (G0597)

P0596016

WRENCH 25MM (G0596-G0597)

P0596004

WHEEL GUARD, LEFT (G0596)

P0596017

SPARK SHIELD (G0596-G0597)

P0597004

WHEEL GUARD, LEFT (G0597)

P0596018

SPARK SHIELD BRACKET

P0596005

WHEEL FLANGE

P0596019

MAGNETIC SWITCH (G0596)

P0596006

WHEEL COVER (G0596)

P0597019

MAGNETIC SWITCH (G0597)

P0597006

WHEEL COVER (G0597)

P0596020

HANDLE 5/16-18 X 5/8

PN22

HEX NUT 1-8 (G0596-G0597)

PFB13

FLANGE BOLT 1/4-20 X 1

PN18

HEX NUT 1-8 LH (G0596-G0597)

PB58

HEX BOLT 3/8-16 X 2

H8880

WHEEL 8 X 1 X 1, 24 GRIT

PB155

HEX BOLT 10-24 X 1-1/4

9-1

H8881

WHEEL 8 X 1 X 1, 36 GRIT

PB09

HEX BOLT 5/16-18 X 1/2

H8882

WHEEL 10 X 1 X 1, 24 GRIT

PB07M

HEX BOLT M8-1.25 X 25

9-1

H8883

WHEEL 10 X 1 X 1, 36 GRIT

PSB17

CAP SCREW 1/4-20 X 3/8

P0596010

WATER TRAY

PS06

PHLP HD SCR 10-24 X 3/8

P0596011

TOOL REST

PS04

PHLP HD SCR 1/4-20 X 1/2

P0596012

EYE SHIELD ASSY (G0596)

PS01

PHLP HD SCR 10-24 X 1/2

P0597012A

EYE SHIELD ASSY (G0597-G0599)

PFH21

FLAT HD SCR 10-24 X 3/4

12-1

P0596012-1

FRAME

P0596031

NYLON CLIP 8MM

12-2

P0596012-2

MOUNT

PN08

HEX NUT 3/8-16

12-3

P0596012-3

PIVOT SUPPORT

PN05

HEX NUT 1/4-20

12-4

P0596012-4

ARM

PWN02

WING NUT 1/4-20

12-5

P0596012-5

BAFFLE

P0596035

STRAIN RELIEF

12-6

P0596012-6

CLEAR SHIELD

P0596036

MOTOR CORD

12-7

P0596012-7

FLUORESCENT TUBE (G0596)

P0596037

POWER CORD

12-7

P0597012-7

FLUORESCENT TUBE (G0597)

PW07

FLAT WASHER 5/16

12-8

P0596012-8

LAMP CONTACT

PLW04

LOCK WASHER 3/8

12-9

P0596012-9

SWITCH

PW02

FLAT WASHER 3/8

12-10

P0596012-10

BALLAST (G0596)

PLW03

LOCK WASHER 3/16

12-10

P0597012-10

BALLAST (G0597)

PW06

FLAT WASHER 1/4

12-11

P0596012-11

KNOB 1/4-20 X 1-3/4

PLW04M

LOCK WASHER 8MM

12-12

P0596012-12

KNOB 1/4-20 X 1/2

PLW03

LOCK WASHER 3/16

12-13

P0596012-13

KNOB 1/4-20 X 1

P0596045

MACHINE ID LABEL (G0596)

12-14

PHTEK33

TAP SCREW 8-32 X 1/4

P0597045

MACHINE ID LABEL (G0597)

12-15

PN05

HEX NUT 1/4-20

P0596046

FACE SHEILD LABEL

12-16

P0596012-16

POWER SUPPLY CORD

PLABEL-14

ELECTRICITY LABEL

-24-

G0596-G0599 Industrial Bench Grinders

Parts List G0598-G0599
REF

PART #

DESCRIPTION

REF

PART #

DESCRIPTION

H7834

STAND (OPTIONAL)

P0596014

SPARK HOOD

P0598002

MOTOR 2HP, 1PH, 220V(G0598)

P0598015

TOOL REST SUPPORT

2-1

P0597002-1

CAPACITOR 50MFD-250VAC

P0598016

WRENCH 50MM (G0598-G0599)

P0599002

MOTOR 3HP, 3PH, 220V(G0599)

P0598017

SPARK SHIELD(G0598)

P0598003

WHEEL GUARD, RIGHT

P0599017

SPARK SHIELD(G0599)

P0598004

WHEEL GUARD, LEFT

P0596018

SPARK SHIELD BRACKET

P0598005

WHEEL FLANGE

P0598019

MAGNETIC SWITCH 2HP(G0598)

P0598006

WHEEL COVER

P0599019

MAGNETIC SWITCH 3HP(G0599)

PN36

HEX NUT 1-1/4-7 (G0598-G0599)

P0596020

HANDLE 5/16-18 X 5/8

PN37

HEX NUT 1-1/4-7 LH (G0598-G0599)

PFB13

FLANGE BOLT 1/4-20 X 1

H8884

WHEEL 12 X 1.5 X1-1/4, 24 GRIT

PB58

HEX BOLT 3/8-16 X 2

9-1

H8885

WHEEL 12 X 1.5 X1-1/4, 36 GRIT

PB93

HEX BOLT 10-24 X 1-1/2

H8885

WHEEL 12 X 2 X 1-1/4, 24 GRIT

PB09

HEX BOLT 5/16-18 X 1/2

9-1

H8887

WHEEL 12 X 2 X 1-1/4, 36 GRIT

PB07M

HEX BOLT M8-1.25 X 25

P0596010

WATER TRAY

PSB17

CAP SCREW 1/4-20 X 3/8

P0598011

TOOL REST (G0598)

PS06

PHLP HD SCR 10-24 X 3/8

P0599011

TOOL REST (G0599)

PS04

PHLP HD SCR 1/4-20 X 1/2

P0597012A

EYE SHIELD W/ LIGHT ASSY

PS01

PHLP HD SCR 10-24 X 1/2

12-1

P0596012-1

FRAME

PFH21

FLAT HD SCR 10-24 X 3/4

12-2

P0596012-2

MOUNT

P0596031

NYLON CLIP 8MM

12-3

P0596012-3

PIVOT SUPPORT

PN08

HEX NUT 3/8-16

12-4

P0596012-4

ARM

PN05

HEX NUT 1/4-20

12-5

P0596012-5

BAFFLE

PWN02

WING NUT 1/4-20

12-6

P0596012-6

CLEAR SHIELD

P0596035

STRAIN RELIEF

12-7

P0597012-7

FLUORESCENT TUBE

P0598036

MOTOR CORD

12-8

P0596012-8

LAMP CONTACT

P0598037

POWER CORD

12-9

P0596012-9

SWITCH

PW07

FLAT WASHER 5/16

12-10

P0597012-10 BALLAST

PLW04

LOCK WASHER 3/8

12-11

P0596012-11 KNOB 1/4-20 X 1-3/4

PW02

FLAT WASHER 3/8

12-12

P0596012-12 KNOB 1/4-20 X 1/2

PLW03

LOCK WASHER 3/16

12-13

P0596012-13 KNOB 1/4-20 X 1

PW06

FLAT WASHER 1/4

12-14

PHTEK33

TAP SCREW 8-32 X 1/4

PLW04M

LOCK WASHER 8MM

12-15

PN05

HEX NUT 1/4-20

PLW03

LOCK WASHER 3/16

12-16

P0596012-16 POWER SUPPLY CORD

P0598045

MACHINE ID LABEL (G0598)

12-17

P0596012-17 LAMP COVER

P0599045

MACHINE ID LABEL (G0599)

12-18

P0596012-18 SPECIAL WASHER

P0596046

FACE SHIELD LABEL

12-19

PW08

FLAT WASHER #8

PLABEL-14

ELECTRICITY LABEL

P0596013

SWITCH BRACKET

G0596-G0599 Industrial Bench Grinders

-25-

WARRANTY AND RETURNS
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty
and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special,
or consequential damages arising from the use of our products.
To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then
issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of the
carton. We will not accept any item back without this number. Proof of purchase must accompany the
merchandise.
The manufacturers reserve the right to change specifications at any time because they constantly strive to
achieve better quality equipment. We make every effort to ensure that our products meet high quality and
durability standards and we hope you never need to use this warranty.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.

-26-

G0596-G0599 Industrial Bench Grinders

�������������
���������������������������������������������������������������������������������� �
������������������������������������������������������������������������������������
����� ����������������������� ������������������������������� ���� ���������������������
���������������������������� ������ ������������������������ ���������������������������
���������������������������� ������������������������������� ���������������������������
�������������������������������������������������������������������������������������������������������������������
����������������������������������������������������������������������������������

��� ���������������������������
�
����� ��������������
�
����� ����������

� ���� �������
� ���� ��������

����� �������
����� ������

���������������������

��� �����������������������������������������������������
����
����
����
����
����
����
����
����
����
����

�������������
���������������
�����������
�����
�������������������
����������������������
����������
�������������������
��������
�����������������

����
����
����
����
����
����
����
����
����
����

�����������������
���������������
�������������������
�������������������
�����������������
�����������������
����������
����
����������
������������

����
����
����
����
����
����
����
����
����

�����������������
����
�����������
�������������
���������
��������
���������������
��������������������
������

��� �������������������������������������
�
����� ����������������
� ���� ����������������
�
����� ����������������
� ���� ����������������

����� ���������������
����� ��������

��� �����������������������
�
����� ������
�
����� ������

����� �����
����� ���

� ���� ������
� ���� ������

��� ������������������������������������������������
�
����� ����������
����� ����������
����� ������������

� ���� ���������

��� �����������������������������������������������
�
����� ����
����� ����
����� ����

� ���� ���

��� ���������������������������������������������������

������ ����

��������

��� ����������������������������������������������������

������ ����

��������

����������������������

�����
�����
����

������������������������
�������������
��������������������������

����������������������

�����������������������������������������������������������������������

����

���������������������
������������������

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 32
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:e943ac1b-1560-11dc-9715-000393c83c9a
Create Date                     : 2006:01:18 13:56:21Z
Metadata Date                   : 2007:06:07 18:38:08-07:00
Modify Date                     : 2007:06:07 18:38:08-07:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Derived From Instance ID        : b5938391-899f-11da-9d70-c979b6e9e27a
Derived From Document ID        : adobe:docid:indd:f42a1f0a-a725-11d8-b1d9-ca3bd2d34ba0
Document ID                     : adobe:docid:indd:b5938392-899f-11da-9d70-c979b6e9e27a
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Reference Instance ID  : uuid:abe9b349-8360-11da-bfbd-ea34b8116b8f, uuid:f9617616-733a-11da-980b-000393c83c9a, uuid:32b3d3f6-7309-11da-980b-000393c83c9a, uuid:abe9b349-8360-11da-bfbd-ea34b8116b8f, uuid:50a88551-6766-11da-a994-000393ba6a32, uuid:d89cd159-7ec8-11da-9b95-0030659a5d8e, uuid:a8bc8876-82b9-11da-acc3-8c1304b45871, uuid:c5dc723b-87f3-11da-b042-ae58f70a3d18, uuid:a96678e6-2ec0-11da-8415-000393c83c9a, uuid:b761ec60-312e-11da-a1a9-000393c83c9a, uuid:c55b93f3-82b9-11da-acc3-8c1304b45871, uuid:3f98668c-8356-11da-bfbd-ea34b8116b8f, uuid:199ae25a-8356-11da-bfbd-ea34b8116b8f, uuid:0a530172-3294-11da-a1f5-c54b7a3c6af1, uuid:0a53017c-3294-11da-a1f5-c54b7a3c6af1, uuid:ae4c162d-3293-11da-a1f5-c54b7a3c6af1, uuid:4b3192b9-884c-11da-8327-0030659a5d8e, uuid:4d7e706a-884c-11da-8327-0030659a5d8e, uuid:a153cc6a-8456-11da-aa33-0030659a5d8e, uuid:c273a048-8456-11da-aa33-0030659a5d8e, uuid:af4f82bc-884c-11da-8327-0030659a5d8e, uuid:0372959a-884d-11da-8327-0030659a5d8e, uuid:7bdb3748-2930-11da-9e16-000393ba6a32, uuid:47f441d8-2930-11da-9e16-000393ba6a32, uuid:1533ff53-2930-11da-9e16-000393ba6a32
Manifest Reference Document ID  : adobe:docid:photoshop:51666773-835e-11da-bfbd-ea34b8116b8f, uuid:8137bfdc-72fc-11da-9e8e-000393c83c9a, uuid:54f65e34-72fe-11da-9e8e-000393c83c9a, adobe:docid:photoshop:51666773-835e-11da-bfbd-ea34b8116b8f, uuid:50a876ee-6766-11da-a994-000393ba6a32, uuid:a7db40d4-7d71-11da-965e-0030654795ea, adobe:docid:photoshop:3a9b5a62-8049-11da-809e-ddc0f099a3b4, adobe:docid:photoshop:53e25f41-8050-11da-809e-ddc0f099a3b4, uuid:eebca8dc-2ebf-11da-a59c-000393c83c9a, uuid:e86395ee-312d-11da-bea7-000393c83c9a, adobe:docid:photoshop:1d6c7662-805b-11da-809e-ddc0f099a3b4, adobe:docid:photoshop:3f986686-8356-11da-bfbd-ea34b8116b8f, adobe:docid:photoshop:199ae254-8356-11da-bfbd-ea34b8116b8f, adobe:docid:photoshop:ae4c1634-3293-11da-a1f5-c54b7a3c6af1, adobe:docid:photoshop:0a53017b-3294-11da-a1f5-c54b7a3c6af1, adobe:docid:photoshop:ae4c162c-3293-11da-a1f5-c54b7a3c6af1, adobe:docid:photoshop:79b5c860-7d11-11da-81d1-dedbae16192d, adobe:docid:photoshop:79b5c860-7d11-11da-81d1-dedbae16192d, uuid:a9cd02dc-7bc4-11da-a2ff-0030659a5d8e, uuid:e70d3c1d-7bc3-11da-a2ff-0030659a5d8e, uuid:af4f7942-884c-11da-8327-0030659a5d8e, uuid:03728922-884d-11da-8327-0030659a5d8e, adobe:docid:indd:7a1d4e35-2a85-11da-9d53-e6edeb4407c1, adobe:docid:indd:7a1d4e35-2a85-11da-9d53-e6edeb4407c1, adobe:docid:indd:7a1d4e35-2a85-11da-9d53-e6edeb4407c1
Format                          : application/pdf
Title                           : G0596/G0597/G0598/G0599.indd
Trapped                         : False
Creator                         : Adobe InDesign CS (3.0.1)
Producer                        : Adobe PDF Library 6.0

EXIF Metadata provided by EXIF.tools

Grizzly G0599 G0596/G0597/G0598/G0599 User Manual To The F88e37d9 8c7d 0464 0919 640d838feaa4

Navigation menu

Versions of this User Manual:

Views

Navigation