Grizzly G0701 G0701_m User Manual To The 2274be71 93ae 4938 Ba19 18e5adccd9ac

User Manual: Grizzly G0701 to the manual

Open the PDF directly: View PDF .
Page Count: 84

Download
Open PDF In Browser	View PDF

MODEL G0701
19" ULTIMATE BANDSAW
OWNER'S MANUAL
(For models manufactured since 03/12)

8DENG><=ID8ID7:G!'%%.7NOOAN>C9JHIG>6A!>C8#!G:K>H:9B6G8=!'%&'@C
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
7AIH&'%,+EG>CI:9>CI6>L6C

This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and comprehension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.

3OME DUST CREATED BY POWER SANDING SAWING GRINDING DRILLING AND
OTHER CONSTRUCTION ACTIVITIES CONTAINS CHEMICALS KNOWN TO THE 3TATE
OF #ALIFORNIA TO CAUSE CANCER BIRTH DEFECTS OR OTHER REPRODUCTIVE
HARM 3OME EXAMPLES OF THESE CHEMICALS ARE
s
s
s

,EAD FROM LEAD BASED PAINTS
#RYSTALLINE SILICA FROM BRICKS CEMENT AND OTHER MASONRY PRODUCTS
!RSENIC AND CHROMIUM FROM CHEMICALLY TREATED LUMBER

9OUR RISK FROM THESE EXPOSURES VARIES DEPENDING ON HOW OFTEN YOU
DO THIS TYPE OF WORK 4O REDUCE YOUR EXPOSURE TO THESE CHEMICALS
7ORK IN A WELL VENTILATED AREA AND WORK WITH APPROVED SAFETY EQUIP
MENT SUCH AS THOSE DUST MASKS THAT ARE SPECIALLY DESIGNED TO FILTER
OUT MICROSCOPIC PARTICLES

Table of Contents
INTRODUCTION ............................................... 2
BVcjVa6XXjgVXn########################################### '
8dciVXi>c[d#################################################### '
BVX]^cZ9ZhXg^ei^dc###################################### '
>YZci^[^XVi^dc################################################### (
BVX]^cZ9ViVH]ZZi###################################### )
SECTION 1: SAFETY ....................................... 6
HV[Zin>chigjXi^dch[dgBVX]^cZgn################## +
6YY^i^dcVaHV[Zin[dg7VcYhVlh##################### SECTION 2: POWER SUPPLY ........................ 9
SECTION 3: SETUP ....................................... 11
CZZYZY[dgHZije######################################### &&
JceVX`^c\#################################################### &&
>ckZcidgn###################################################### &'
8aZVcje######################################################## &'
H^iZ8dch^YZgVi^dch###################################### &(
Bdk^c\EaVX^c\7VcYhVl######################### &)
Bdjci^c\idH]de;addg############################### &*
HZijeEgdXZYjgZh######################################## &+
7aVYZIgVX`^c\############################################# &+
6Y_jhi^c\Edh^i^kZHide################################ &,
;ZcXZ########################################################### &.
9jhi8daaZXi^dc############################################# '%
IZhiGjc###################################################### '%
6YY^i^dcVa6Y_jhibZcih################################ ''
IZch^dc^c\7aVYZ######################################### ''
6a^\c^c\IVWaZ############################################## '(
6a^\c^c\B^iZgcheZXi^dc################################### ()
;ddi7gV`Z################################################### (*
IVWaZI^ai###################################################### (*
c[dgbVi^dc######################################### (.
7aVYZ8]Vc\Zh############################################ )&
7aVYZAZVY################################################### )'

SECTION 5: ACCESSORIES ......................... 43
SECTION 6: MAINTENANCE......................... 45
HX]ZYjaZ###################################################### )*
8aZVc^c\####################################################### )*
JceV^ciZY8Vhi>gdc##################################### )*
7gjh]Zh######################################################## )*
AjWg^XVi^dc################################################### )*
GZYgZhh^c\GjWWZgI^gZh############################# )SECTION 7: SERVICE ................................... 49
IgdjWaZh]ddi^c\########################################### ).
8]ZX`^c\VcYIZch^dc^c\K"7Zaih################ *(
6Y_jhi^c\L]ZZaVcY7aVYZ7gjh]Zh########### **
6Y_jhi^c\IZch^dcAZkZg############################## **
6Y_jhi^c\chigjXi^dch############################ +(
:aZXig^XVaDkZgk^Zl###################################### +)
?jcXi^dc7dm!BdidgBV\cZi^XHl^iX]###### +*
8dcigdaEVcZa[ ndj ]VkZ
Vcn fjZhi^dch dg cZZY ]Zae! jhZ i]Z ^c[dgbVi^dc
WZadlidXdciVXijh#7Z[dgZXdciVXi^c\!eaZVhZ\Zi
i]Z hZg^Va cjbWZg VcY bVcj[VXijgZ YViZ d[ ndjg
bVX]^cZ#I]^hl^aa]Zaejh]Zaendj[VhiZg#

6ahd! dl^c\ id djg eda^Xn d[ Xdci^cjdjh ^begdkZ"
bZci!your machine may not exactly match the
manual#>[ndj[^cYi]^hidWZi]ZXVhZ!VcYi]ZY^["
[ZgZcXZWZilZZci]ZbVcjVaVcYbVX]^cZaZVkZh
ndj ^c YdjWi! X]ZX` djg lZWh^iZ [dg i]Z aViZhi
bVcjVajeYViZdgXVaaiZX]c^XVahjeedgi[dg]Zae#
7Z[dgZXVaa^c\![^cYi]ZbVcj[VXijgZYViZd[ndjg
bVX]^cZWnadd`^c\Vii]ZYViZhiVbeZY^cidi]Z
bVX]^cZ >9 aVWZa hZZ WZadl# I]^h l^aa ]Zae jh
YZiZgb^cZ ^[ i]Z bVcjVa kZgh^dc ndj gZXZ^kZY
bViX]Zhi]ZbVcj[VXijgZYViZd[ndjgbVX]^cZ#


6

L

?
@

N
E

A

H

M

B

L

C

I
K

D
J

Figure 1.<%,%&[gdcik^Zl#
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.

@ZnHl^iX]!DCD;;7jiidch
c[dgbVi^dc
Standard Blade Length..................................................................................................................... 166-168 in.
Blade Width Range....................................................................................................................... 3/8 - 1-3/8 in.
Upper Blade Guides........................................................................................................................ Ball Bearing
Lower Blade Guides........................................................................................................................ Ball Bearing
IVWaZ>c[dgbVi^dc
Table Length.............................................................................................................................................. 24 in.
Table Width................................................................................................................................................ 28 in.
Floor to Table Height........................................................................................................................... 35-1/4 in.
;ZcXZ>c[dgbVi^dc
Locks in Front............................................................................................................................................... Yes
Locks in Rear................................................................................................................................................. No
Adjustable for Blade Lead............................................................................................................................ Yes
8dchigjXi^dc
Table....................................................................................................................... Precision-Ground Cast Iron
Rip Fence ............................................................................................ Deluxe Extruded Aluminum & Cast Iron
Body....................................................................................................................... One-Piece Reinforced Steel
Upper Wheel....................................................................................................... Computer-Balanced Cast Iron
Lower Wheel....................................................................................................... Computer-Balanced Cast Iron
Tire.......................................................................................................................................................... Rubber
Wheel Cover ......................................................................................................................... Pre-Formed Steel
Paint........................................................................................................................................... Powder Coated
Di]ZgGZaViZY>c[dgbVi^dc
Wheel Diameter......................................................................................................................................... 19 in.
Wheel Width...................................................................................................................................... 1-13/16 in.
Number of Dust Ports....................................................................................................................................... 2
Dust Port Size.............................................................................................................................................. 4 in.
Mobile Base........................................................................................................................................... G7315Z
Di]ZgHeZX^[^XVi^dch/
Country Of Origin ............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Serial Number Location ............................................................................................ ID Label on Upper Wheel Cover
Customer Assembly & Setup Time ................................................................................................................... 1 Hour

BdYZa<%,%&B[\#H^cXZ($&'

"*"

SECTION 1: SAFETY
For Your Own Safety, Read Instruction
Manual Before Operating this Machine
The purpose of safety symbols is to attract your attention to possible hazardous conditions.
This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that
safety messages by themselves do not eliminate danger and are not a substitute for proper
accident prevention measures. Always use common sense and good judgement.
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to alert
against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about
proper operation of the machine.

OWNER’S MANUAL. GZVY VcY jcYZghiVcY i]^h
dlcZg»hbVcjVa7:;DG:jh^c\bVX]^cZ#

ELECTRICAL EQUIPMENT INJURY RISKS.Ndj
XVcWZh]dX`ZY!WjgcZY!dg`^aaZYWnidjX]^c\a^kZ
ZaZXig^XVa XdbedcZcih dg ^begdeZgan \gdjcYZY
bVX]^cZgn#IdgZYjXZi]^hg^h`!dcanVaadlfjVa^[^ZY
hZgk^XZ eZghdccZa id Yd ZaZXig^XVa ^chiVaaVi^dc dg
gZeV^gldg`!VcYValVnhY^hXdccZXiedlZgWZ[dgZ
VXXZhh^c\dgZmedh^c\ZaZXig^XVaZfj^ebZci#

Safety Instructions for Machinery

TRAINED OPERATORS ONLY.JcigV^cZYdeZg"
Vidgh ]VkZ V ]^\]Zg g^h` d[ WZ^c\ ]jgi dg `^aaZY#
Dcan Vaadl igV^cZY$hjeZgk^hZY eZdeaZ id jhZ i]^h
bVX]^cZ# L]Zc bVX]^cZ ^h cdi WZ^c\ jhZY! Y^h"
XdccZXi edlZg! gZbdkZ hl^iX] `Znh! dg adX`"dji
bVX]^cZidegZkZcijcVji]dg^oZYjhZ·ZheZX^Vaan
VgdjcYX]^aYgZc#BV`Zldg`h]de`^Yegdd[

DANGEROUS ENVIRONMENTS. 9d cdi jhZ
bVX]^cZgn^cVgZVhi]ViVgZlZi!XajiiZgZY!dg]VkZ
eddga^\]i^c\#DeZgVi^c\bVX]^cZgn^ci]ZhZVgZVh
\gZVian^cXgZVhZhi]Zg^h`d[VXX^YZcihVcY^c_jgn#
MENTAL ALERTNESS REQUIRED. ;jaa bZciVa
VaZgicZhh^hgZfj^gZY[dghV[ZdeZgVi^dcd[bVX]^c"
Zgn#CZkZgdeZgViZjcYZgi]Z^c[ajZcXZd[Ygj\hdg
VaXd]da!l]Zci^gZY!dgl]ZcY^higVXiZY#

"+"

DISCONNECT POWER FIRST. 6alVnh Y^hXdc"
cZXibVX]^cZ[gdbedlZghjeean7:;DG:bV`^c\
VY_jhibZcih!X]Vc\^c\idda^c\!dghZgk^X^c\bVX]^cZ#
I]^hegZkZcihVc^c_jgng^h`[gdbjc^ciZcYZYhiVgije
dgXdciVXil^i]a^kZZaZXig^XVaXdbedcZcih#
EYE PROTECTION.6alVnhlZVg6CH>"VeegdkZY
hV[Zin\aVhhZhdgV[VXZh]^ZaYl]ZcdeZgVi^c\dg
dWhZgk^c\ bVX]^cZgn id gZYjXZ i]Z g^h` d[ ZnZ
^c_jgndgWa^cYcZhh[gdb[an^c\eVgi^XaZh#:kZgnYVn
ZnZ\aVhhZhVgZcdiVeegdkZYhV[Zin\aVhhZh#

BdYZa<%,%&B[\#H^cXZ($&'



WEARING PROPER APPAREL. 9d cdi lZVg
Xadi]^c\! VeeVgZa dg _ZlZagn i]Vi XVc WZXdbZ
ZciVc\aZY ^c bdk^c\ eVgih# 6alVnh i^Z WVX` dg
XdkZg adc\ ]V^g# LZVg cdc"ha^e [ddilZVg id Vkd^Y
VXX^YZciVaha^eh!l]^X]XdjaYXVjhZadhhd[ldg`"
e^ZXZXdcigda#
HAZARDOUS DUST. 9jhi XgZViZY l]^aZ jh^c\
bVX]^cZgn bVn XVjhZ XVcXZg! W^gi] YZ[ZXih! dg
adc\"iZgb gZhe^gVidgn YVbV\Z# 7Z VlVgZ d[ Yjhi
]VoVgYhVhhdX^ViZYl^i]ZVX]ldg`e^ZXZbViZg^Va!
VcYValVnhlZVgVC>DH="VeegdkZYgZhe^gVidgid
gZYjXZndjgg^h`#
HEARING PROTECTION. 6alVnh lZVg ]ZVg"
^c\ egdiZXi^dc l]Zc deZgVi^c\ dg dWhZgk^c\ adjY
bVX]^cZgn# :miZcYZY ZmedhjgZ id i]^h cd^hZ
l^i]dji ]ZVg^c\ egdiZXi^dc XVc XVjhZ eZgbVcZci
]ZVg^c\adhh#
REMOVE ADJUSTING TOOLS. Iddah aZ[i dc
bVX]^cZgn XVc WZXdbZ YVc\Zgdjh egd_ZXi^aZh
jedchiVgije#CZkZgaZVkZX]jX``Znh!lgZcX]Zh!
dg Vcn di]Zg iddah dc bVX]^cZ# 6alVnh kZg^[n
gZbdkVaWZ[dgZhiVgi^c\
INTENDED USAGE. Dcan jhZ bVX]^cZ [dg ^ih
^ciZcYZYejgedhZVcYcZkZgbV`ZbdY^[^XVi^dch
cdi VeegdkZY Wn i l^aa Yd i]Z _dW hV[Zg VcY WZiiZg Vi i]Z gViZ [dg
l]^X]^ilVhYZh^\cZY#
NEVER STAND ON MACHINE. HZg^djh ^c_jgn
bVn dXXjg ^[ bVX]^cZ ^h i^eeZY dg ^[ i]Z Xjii^c\
idda^hjc^ciZci^dcVaanXdciVXiZY#
STABLE MACHINE. JcZmeZXiZYbdkZbZciYjg"
^c\ deZgVi^dc \gZVian ^cXgZVhZh g^h` d[ ^c_jgn dg
adhhd[Xdcigda#7Z[dgZhiVgi^c\!kZg^[nbVX]^cZ^h
hiVWaZVcYbdW^aZWVhZ^[jhZY^hadX`ZY#
USE RECOMMENDED ACCESSORIES.8dchjai
i]^hdlcZg»hbVcjVadgi]ZbVcj[VXijgZg[dggZX"
dbbZcYZY VXXZhhdg^Zh# Jh^c\ ^begdeZg VXXZh"
hdg^Zhl^aa^cXgZVhZi]Zg^h`d[hZg^djh^c_jgn#
UNATTENDED OPERATION. Id gZYjXZ i]Z
g^h` d[ VXX^YZciVa ^c_jgn! ijgc bVX]^cZ OFF VcY
ZchjgZ Vaa bdk^c\ eVgih XdbeaZiZan hide WZ[dgZ
lVa`^c\ VlVn# CZkZg aZVkZ bVX]^cZ gjcc^c\
l]^aZjcViiZcYZY#
MAINTAIN WITH CARE.;daadlVaabV^ciZcVcXZ
^chigjXi^dch VcY ajWg^XVi^dc hX]ZYjaZh id `ZZe
bVX]^cZ ^c \ddY ldg`^c\ XdcY^i^dc# 6 bVX]^cZ
i]Vi ^h ^begdeZgan bV^ciV^cZY XdjaY bVa[jcXi^dc!
aZVY^c\idhZg^djheZghdcVa^c_jgndgYZVi]#
CHECK DAMAGED PARTS. GZ\jaVgan ^cheZXi
bVX]^cZ [dg Vcn XdcY^i^dc i]Vi bVn V[[ZXi hV[Z
deZgVi^dc#>bbZY^ViZangZeV^gdggZeaVXZYVbV\ZY
dgb^h"VY_jhiZYeVgihWZ[dgZdeZgVi^c\bVX]^cZ#

CHILDREN & BYSTANDERS. @ZZeX]^aYgZcVcY
WnhiVcYZghViVhV[ZY^hiVcXZ[gdbi]Zldg`VgZV#
Hidejh^c\bVX]^cZ^[i]ZnWZXdbZVY^higVXi^dc#

MAINTAIN POWER CORDS. L]Zc Y^hXdccZXi"
^c\ XdgY"XdccZXiZY bVX]^cZh [gdb edlZg! \gVW
VcYejaai]Zeaj\·CDIi]ZXdgY#Ejaa^c\i]ZXdgY
bVn YVbV\Z i]Z l^gZh ^ch^YZ# 9d cdi ]VcYaZ
XdgY$eaj\l^i]lZi]VcYh#6kd^YXdgYYVbV\ZWn
`ZZe^c\^iVlVn[gdb]ZViZYhjg[VXZh!]^\]igV[[^X
VgZVh!]Vgh]X]Zb^XVah!VcYlZi$YVbeadXVi^dch#

GUARDS & COVERS.[ Vi Vcn i^bZ
ndjZmeZg^ZcXZY^[[^Xjai^ZheZg[dgb^c\i]Z^ciZcY"
ZYdeZgVi^dc!hidejh^c\i]ZbVX]^cZ8dciVXidjg
IZX]c^XVaHjeedgiVi*,%*)+".++(#

BdYZa<%,%&B[\#H^cXZ($&'

","



Additional Safety for Bandsaws
BLADE CONDITION. 9d cdi deZgViZ l^i] Yjaa!
XgVX`ZYdgWVYanldgcWaVYZ#9jaaWaVYZhgZfj^gZ
bdgZZ[[dgiideZg[dgbi]ZXji#>cheZXiWaVYZh[dg
XgVX`hVcYb^hh^c\iZZi]WZ[dgZZVX]jhZ#

CUTTING TECHNIQUES.EaVcndjgXjihhdndj
ValVnh Xji dji d[ i]Z lddY# 9D CDI WVX` i]Z
ldg`e^ZXZ VlVn [gdb i]Z WaVYZ l]^aZ i]Z hVl ^h
gjcc^c\#>[ndjcZZYidWVX`i]Zldg`dji!ijgci]Z
WVcYhVlD;;VcYlV^i[dgi]ZWaVYZidXdbZidV
HAND PLACEMENT. CZkZg edh^i^dc [^c\Zgh dg XdbeaZiZhide!VcY9DCDIil^hidgejiZmXZhh^kZ
]VcYh ^c a^cZ l^i] i]Z WaVYZ# >[ i]Z ldg`e^ZXZ dg higZhhdci]ZWaVYZl]^aZWVX`^c\i]Zldg`VlVn#
ndjg ]VcYh ha^e! hZg^djh eZghdcVa ^c_jgn XdjaY
dXXjg#
LEAVING WORK AREA.CZkZgaZVkZVbVX]^cZ
gjcc^c\ jcViiZcYZY# 6aadl i]Z WVcYhVl id XdbZ
WORKPIECE MATERIAL. I]^h bVX]^cZ ^h idVXdbeaZiZhideVcYjhZi]ZeVYadX`idY^hVWaZ
^ciZcYZY[dgXjii^c\cVijgVaVcYbVc"bVYZlddY i]ZbVX]^cZWZ[dgZndjaZVkZ^ijcViiZcYZY#
egdYjXih! VcY aVb^cViZ XdkZgZY lddY egdYjXih#
I]^hbVX]^cZ^hCDIYZh^\cZYidXjibZiVa!\aVhh! FEED RATE. Id Vkd^Y i]Z g^h` d[ i]Z ldg`e^ZXZ
hidcZ!i^aZ!ZiX#
ha^ee^c\VcYXVjh^c\deZgVidg^c_jgn!ValVnh[ZZY
hidX`ZkZcanVcYhbddi]an#9DCDI[dgXZdgil^hi
BLADE REPLACEMENT.IdVkd^Yb^h]Vehi]Vi i]Z WaVYZ l]^aZ Xjii^c\! ZheZX^Vaan l]Zc hVl^c\
XdjaYgZhjai^cdeZgVidg^c_jgn!bV`ZhjgZi]ZWaVYZ hbVaaXjgkZh#
iZZi][VXZYdlcidlVgYi]ZiVWaZVcYi]ZWaVYZ^h
egdeZganiZch^dcZYVcYigVX`ZYWZ[dgZdeZgVi^c\# SMALL WORKPIECE HANDLING. 6alVnh hje"
edgi$[ZZYi]Zldg`e^ZXZl^i]ejh]hi^X`h!_^\!k^hZ!
BLADE SPEED. Bdk^c\ i]Z ldg`e^ZXZ V\V^chi dg hdbZ ineZ d[ XaVbe^c\ [^mijgZ# >[ ndjg ]VcYh
VWaVYZi]Vi^hcdiVi[jaaheZZYXdjaYXVjhZ`^X`" ha^e Yjg^c\ V Xji l]^aZ ]daY^c\ hbVaa ldg`e^ZXZh
WVX`#6alVnhVaadli]ZWaVYZidXdbZid[jaaheZZY l^i]ndjg[^c\Zgh!VbejiVi^dcdgaVXZgVi^dc^c_jg^Zh
WZ[dgZhiVgi^c\i]ZXji#
XdjaYdXXjg#
GUARDS.I]ZWaVYZ\jVgYegdiZXihi]ZdeZgVidg BLADE CONTROL. Id Vkd^Y hZg^djh eZghdcVa
[gdb i]Z bdk^c\ WVcYhVl WaVYZ# DCAN deZgViZ ^c_jgn!9DCDIViiZbeiidhidedghadli]ZWaVYZ
i]^hWVcYhVll^i]i]ZWaVYZ\jVgY^chiVaaZY#
l^i]ndjg]VcYdgi]Zldg`e^ZXZ#6aadli]ZWaVYZ
idhidedc^ihdlc#

Like all machinery there is potential danger
when operating this machine. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.

"-"

No list of safety guidelines can be complete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. Failure to do so could result in
serious personal injury, damage to equipment, or poor work results.

BdYZa<%,%&B[\#H^cXZ($&'

SECTION 2: POWER SUPPLY
Availability

Circuit Requirements for 230V

7Z[dgZ^chiVaa^c\i]ZbVX]^cZ!Xdch^YZgi]ZVkV^a"
VW^a^inVcYegdm^b^ind[i]ZgZfj^gZYedlZghjeean
X^gXj^i# >[ Vc Zm^hi^c\ X^gXj^i YdZh cdi bZZi i]Z
gZfj^gZbZcih[dgi]^hbVX]^cZ!VcZlX^gXj^ibjhi
WZ^chiVaaZY#Idb^c^b^oZi]Zg^h`d[ZaZXigdXji^dc!
[^gZ! dg Zfj^ebZci YVbV\Z! ^chiVaaVi^dc ldg` VcY
ZaZXig^XVal^g^c\bjhiWZYdcZWnVcZaZXig^XVcdg
fjVa^[^ZYhZgk^XZeZghdccZa^cVXXdgYVcXZl^i]Vaa
Veea^XVWaZXdYZhVcYhiVcYVgYh#

I]^h bVX]^cZ ^h egZl^gZY id deZgViZ dc V '(%K
edlZghjeeanX^gXj^ii]Vi]VhVkZg^[^ZY\gdjcYVcY
bZZihi]Z[daadl^c\gZfj^gZbZcih/

Electrocution, fire, or
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.

Nominal Voltage ........................................230V
Cycle ..........................................................60 Hz
Phase .................................................... 1-Phase
Power Supply Circuit ......................... 30 Amps
Plug/Receptacle ...........................NEMA L6-30
Cord ........“S”-Type, 3-Wire, 12 AWG, 300 VAC
6 edlZg hjeean X^gXj^i ^cXajYZh Vaa ZaZXig^XVa
Zfj^ebZciWZilZZci]ZWgZV`ZgWdmdg[jhZeVcZa
^ci]ZWj^aY^c\VcYi]ZbVX]^cZ#I]ZedlZghje"
eanX^gXj^ijhZY[dgi]^hbVX]^cZbjhiWZh^oZYid
hV[Zan]VcYaZi]Z[jaa"adVYXjggZciYgVlc[gdbi]Z
bVX]^cZ [dg Vc ZmiZcYZY eZg^dY d[ i^bZ# >[ i]^h
bVX]^cZ ^h XdccZXiZY id V X^gXj^i egdiZXiZY Wn
[jhZh!jhZVi^bZYZaVn[jhZbVg`ZY9#

Full-Load Current Rating
I]Z [jaa"adVY XjggZci gVi^c\ ^h i]Z VbeZgV\Z V
bVX]^cZYgVlhVi&%%d[i]ZgViZYdjiejiedlZg#
Dc bVX]^cZh l^i] bjai^eaZ bdidgh! i]^h ^h i]Z
VbeZgV\ZYgVlcWni]ZaVg\Zhibdidgdghjbd[Vaa
bdidgh VcY ZaZXig^XVa YZk^XZh i]Vi b^\]i deZgViZ
VidcZi^bZYjg^c\cdgbVadeZgVi^dch#
Full-Load Current Rating at 230V ..... 22 Amps
I]Z[jaa"adVYXjggZci^hcdii]ZbVm^bjbVbdjci
d[Vbehi]Vii]ZbVX]^cZl^aaYgVl#>[i]ZbVX]^cZ
^hdkZgadVYZY!^il^aaYgVlVYY^i^dcVaVbehWZndcY
i]Z[jaa"adVYgVi^c\#

For your own safety and protection of
property, consult an electrician if you are
unsure about wiring practices or electrical
codes in your area.
Note: The circuit requirements listed in this manual apply to a dedicated circuit—where only one
machine will be running at a time. If this machine
will be connected to a shared circuit where multiple machines will be running at the same time,
consult a qualified electrician to ensure that the
circuit is properly sized for safe operation.

>[i]ZbVX]^cZ^hdkZgadVYZY[dgVhj[[^X^ZciaZc\i]
d[i^bZ!YVbV\Z!dkZg]ZVi^c\!dg[^gZbVngZhjai·
ZheZX^Vaan ^[ XdccZXiZY id Vc jcYZgh^oZY X^gXj^i#
Id gZYjXZ i]Z g^h` d[ i]ZhZ ]VoVgYh! Vkd^Y dkZg"
adVY^c\ i]Z bVX]^cZ Yjg^c\ deZgVi^dc VcY bV`Z
hjgZ^i^hXdccZXiZYidVedlZghjeeanX^gXj^ii]Vi
bZZihi]ZgZfj^gZbZcih^ci]Z[daadl^c\hZXi^dc#

BdYZa<%,%&B[\#H^cXZ($&'

"."

Grounding Instructions
I]^h bVX]^cZ BJHI WZ \gdjcYZY# >c i]Z ZkZci
d[XZgiV^cbVa[jcXi^dchdgWgZV`Ydlch!\gdjcY^c\
gZYjXZh i]Z g^h` d[ ZaZXig^X h]dX` Wn egdk^Y^c\ V
eVi]d[aZVhigZh^hiVcXZ[dgZaZXig^XXjggZci#
I]ZedlZgXdgYVcYeaj\heZX^[^ZYjcYZg¸8^gXj^i
GZfj^gZbZcih [dg '(%K¹ dc i]Z egZk^djh eV\Z
]VhVcZfj^ebZci"\gdjcY^c\l^gZVcYV\gdjcY"
^c\ egdc\# I]Z eaj\ bjhi dcan WZ ^chZgiZY ^cid
V bViX]^c\ gZXZeiVXaZ djiaZi i]Vi ^h egdeZgan
^chiVaaZYVcY\gdjcYZY^cVXXdgYVcXZl^i]VaaadXVa
XdYZhVcYdgY^cVcXZhhZZ[daadl^c\[^\jgZ#
L6-30 GROUNDED
LOCKING
RECEPTACLE
begdeZgXdccZXi^dcd[i]ZZfj^ebZci"\gdjcY^c\
l^gZ XVc gZhjai ^c V g^h` d[ ZaZXig^X h]dX`# I]Z
l^gZ l^i] \gZZc ^chjaVi^dc l^i] dg l^i]dji nZaadl
hig^eZh^hi]ZZfj^ebZci"\gdjcY^c\l^gZ#>[gZeV^g
dggZeaVXZbZcid[i]ZedlZgXdgYdgeaj\^hcZX"
ZhhVgn!YdcdiXdccZXii]ZZfj^ebZci"\gdjcY^c\
l^gZidVa^kZXjggZciXVggn^c\iZgb^cVa#
8]ZX` l^i] V fjVa^[^ZY ZaZXig^X^Vc dg hZgk^XZ eZg"
hdccZa^[ndjYdcdijcYZghiVcYi]ZhZ\gdjcY^c\
gZfj^gZbZcih!dg^[ndjVgZ^cYdjWiVWdjil]Zi]Zg
i]Z idda ^h egdeZgan \gdjcYZY# >[ ndj ZkZg cdi^XZ
i]Vi V XdgY dg eaj\ ^h YVbV\ZY dg ldgc! Y^hXdc"
cZXi^i[gdbedlZg!VcY^bbZY^ViZangZeaVXZ^il^i]
VcZldcZ#

Extension Cords

Figure 3. Ine^XVaA+"(%eaj\VcYgZXZeiVXaZ#

LZ Yd cdi gZXdbbZcY jh^c\ Vc ZmiZch^dc XdgY
l^i] i]^h bVX]^cZ# >[ ndj bjhi jhZ Vc ZmiZch^dc
XdgY!dcanjhZ^i^[VWhdajiZancZXZhhVgnVcYdcan
dcViZbedgVgnWVh^h#

Serious injury could occur if you connect
the machine to power before completing the
setup process. DO NOT connect to power
until instructed later in this manual.

:miZch^dc XdgYh XVjhZ kdaiV\Z Ygde! l]^X] bVn
YVbV\ZZaZXig^XVaXdbedcZcihVcYh]dgiZcbdidg
a^[Z#KdaiV\ZYgde^cXgZVhZhVhi]ZZmiZch^dcXdgY
h^oZ\Zihadc\ZgVcYi]Z\Vj\Zh^oZ\ZihhbVaaZg
]^\]Zg\Vj\ZcjbWZgh^cY^XViZhbVaaZgh^oZh#
6cnZmiZch^dcXdgYjhZYl^i]i]^hbVX]^cZbjhi
XdciV^c V \gdjcY l^gZ! bViX] i]Z gZfj^gZY eaj\
VcY gZXZeiVXaZ! VcY bZZi i]Z [daadl^c\ gZfj^gZ"
bZcih/
Minimum Gauge Size ...........................10 AWG
Maximum Length (Shorter is Better).......50 ft.

No adapter should be used with the
required plug. If the plug does not fit the
available receptacle, or the machine must
be reconnected for use on a different type
of circuit, the reconnection must be made
by a qualified electrician and comply with all
local codes and ordinances.

"&%"

BdYZa<%,%&B[\#H^cXZ($&'

SECTION 3: SETUP
Needed for Setup
This machine presents
serious injury hazards
to untrained users. Read
through this entire manual to become familiar with
the controls and operations before starting the
machine!

I]Z [daadl^c\ VgZ cZZYZY id XdbeaZiZ i]Z hZije
egdXZhh!WjiVgZcdi^cXajYZYl^i]ndjgbVX]^cZ#
Safety
™ HV[ZincXgZbZciZYGjaZg
™ 9jhi8daaZXi^dcHnhiZb
™ Ild)9jhi=dhZhl$8aVbeh

Unpacking
Ndjg bVX]^cZ lVh XVgZ[jaan eVX`V\ZY [dg hV[Z
igVchedgiVi^dc# GZbdkZ i]Z eVX`V\^c\ bViZg^Vah
[gdb VgdjcY ndjg bVX]^cZ VcY ^cheZXi ^i# >[ ndj
Y^hXdkZgi]ZbVX]^cZ^hYVbV\ZY!please immediately call Customer Service at (570) 546-9663
for advice.
HVkZi]ZXdciV^cZghVcYVaaeVX`^c\bViZg^Vah[dg
edhh^WaZ ^cheZXi^dc Wn i]Z XVgg^Zg dg ^ih V\Zci#
Otherwise, filing a freight claim can be difficult.
L]ZcndjVgZXdbeaZiZanhVi^h[^ZYl^i]i]ZXdcY^"
i^dcd[ndjgh]^ebZci!^ckZcidgni]ZXdciZcih#
BdYZa<%,%&B[\#H^cXZ($&'

"&&"

Inventory

Cleanup

I]Z[daadl^c\^hVYZhXg^ei^dcd[i]ZbV^cXdbed"
cZcihh]^eeZYl^i]ndjgbVX]^cZ#AVni]ZXdbed"
cZcihdjiid^ckZcidgni]Zb#

I]Z jceV^ciZY hjg[VXZh d[ ndjg bVX]^cZ VgZ
XdViZY l^i] V ]ZVkn"Yjin gjhi egZkZciVi^kZ i]Vi
egZkZcih Xdggdh^dc Yjg^c\ h]^ebZci VcY hidgV\Z#
I]^hgjhiegZkZciVi^kZldg`hZmigZbZanlZaa!Wji^i
l^aaiV`ZVa^iiaZi^bZidXaZVc#

Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
Inventory: (Figure 4)
Qty
A. 7VcYhVlCdiH]dlc################################ &
B. HiVcYVgY;ZcXZ6hhZbWan######################### &
C. GZhVl;ZcXZ############################################# &
D. B^iZg[ Vcn cdcegdeg^ZiVgn eVgih VgZ b^hh^c\ Z#\# V
cji dg V lVh]Zg! lZ l^aa \aVYan gZeaVXZ i]Zb0 dg
[dgi]ZhV`Zd[ZmeZY^ZcXn!gZeaVXZbZcihXVcWZ
dWiV^cZYVindjgadXVa]VgYlVgZhidgZ#

7Z eVi^Zci VcY Yd V i]dgdj\] _dW XaZVc^c\ ndjg
bVX]^cZ#I]Zi^bZndjheZcYYd^c\i]^hcdll^aa
\^kZndjVWZiiZgVeegZX^Vi^dc[dgi]ZegdeZgXVgZ
d[ndjgbVX]^cZhjceV^ciZYhjg[VXZh#
I]ZgZVgZbVcnlVnhidgZbdkZi]^hgjhiegZkZc"
iVi^kZ!Wjii]Z[daadl^c\hiZehldg`lZaa^cVl^YZ
kVg^Zin d[ h^ijVi^dch# 6alVnh [daadl i]Z bVcj[VX"
ijgZg»h^chigjXi^dchl^i]VcnXaZVc^c\egdYjXindj
jhZVcYbV`ZhjgZndjldg`^cVlZaa"kZci^aViZY
VgZVidb^c^b^oZZmedhjgZididm^X[jbZh#
Before cleaning, gather the following:
™ 9^hedhVWaZGV\h
™ 8aZVcZg$YZ\gZVhZgL9™)%ldg`hlZaa
™ HV[Zin\aVhhZhY^hedhVWaZ\adkZh
™ EaVhi^XeV^cihXgVeZgdei^dcVa
Basic steps for removing rust preventative:

8

7

1. EjidchV[Zin\aVhhZh#
2. 8dVi i]Z gjhi egZkZciVi^kZ l^i] V a^WZgVa
Vbdjcid[XaZVcZg$YZ\gZVhZg!i]ZcaZi^ihdV`
[dg*¶&%b^cjiZh#

9
=
<
;
:
Figure 4.<%,%&^ckZcidgn#

SUFFOCATION HAZARD!
Immediately discard all plastic bags and packing materials to eliminate choking/suffocation hazards for children
and animals.
"&'"

3. L^eZd[[i]Zhjg[VXZh#>[ndjgXaZVcZg$YZ\gZVh"
Zg^hZ[[ZXi^kZ!i]ZgjhiegZkZciVi^kZl^aal^eZ
d[[ZVh^an#>[ndj]VkZVeaVhi^XeV^cihXgVeZg!
hXgVeZd[[VhbjX]VhndjXVc[^ghi!i]Zcl^eZ
d[[i]ZgZhil^i]i]ZgV\#
4. GZeZViSteps 2–3VhcZXZhhVgnjci^aXaZVc!
i]ZcXdViVaajceV^ciZYhjg[VXZhl^i]VfjVa^in
bZiVaegdiZXiVciidegZkZcigjhi#

NOTICE
Avoid chlorine-based solvents, such as
acetone or brake parts cleaner, that may
damage painted surfaces.

BdYZa<%,%&B[\#H^cXZ($&'

Site Considerations
Weight Load

Physical Environment

GZ[Zgidi]ZMachine Data Sheet[dgi]ZlZ^\]i
d[ndjgbVX]^cZ#BV`ZhjgZi]Vii]Zhjg[VXZjedc
l]^X]i]ZbVX]^cZ^heaVXZYl^aaWZVgi]ZlZ^\]i
d[i]ZbVX]^cZ!VYY^i^dcVaZfj^ebZcii]VibVnWZ
^chiVaaZYdci]ZbVX]^cZ!VcYi]Z]ZVk^Zhildg`"
e^ZXZi]Vil^aaWZjhZY#6YY^i^dcVaan!Xdch^YZgi]Z
lZ^\]i d[ i]Z deZgVidg VcY Vcn YncVb^X adVY^c\
i]VibVndXXjgl]ZcdeZgVi^c\i]ZbVX]^cZ#

I]Z e]nh^XVa Zck^gdcbZci l]ZgZ i]Z bVX]^cZ ^h
deZgViZY^h^bedgiVci[dghV[ZdeZgVi^dcVcYadc"
\Zk^in d[ bVX]^cZ XdbedcZcih# ;dg WZhi gZhjaih!
deZgViZi]^hbVX]^cZ^cVYgnZck^gdcbZcii]Vi^h
[gZZ [gdb ZmXZhh^kZ bd^hijgZ! ]VoVgYdjh X]Zb^"
XVah! V^gWdgcZ VWgVh^kZh! dg ZmigZbZ XdcY^i^dch#
:migZbZXdcY^i^dch[dgi]^hineZd[bVX]^cZgnVgZ
\ZcZgVaan i]dhZ l]ZgZ i]Z VbW^Zci iZbeZgVijgZ
gVc\Z ZmXZZYh )&•¶&%)•;0 i]Z gZaVi^kZ ]jb^Y^in
gVc\ZZmXZZYh'%¶.*cdc"XdcYZch^c\0dgi]Z
Zck^gdcbZci ^h hjW_ZXi id k^WgVi^dc! h]dX`h! dg
Wjbeh#

Space Allocation
8dch^YZg i]Z aVg\Zhi h^oZ d[ ldg`e^ZXZ i]Vi l^aa
WZ egdXZhhZY i]gdj\] i]^h bVX]^cZ VcY egdk^YZ
Zcdj\] heVXZ VgdjcY i]Z bVX]^cZ [dg VYZfjViZ
deZgVidg bViZg^Va ]VcYa^c\ dg i]Z ^chiVaaVi^dc d[
Vjm^a^VgnZfj^ebZci#L^i]eZgbVcZci^chiVaaVi^dch!
aZVkZZcdj\]heVXZVgdjcYi]ZbVX]^cZiddeZc
dggZbdkZYddgh$XdkZghVhgZfj^gZYWni]ZbV^c"
iZcVcXZ VcY hZgk^XZ YZhXg^WZY ^c i]^h bVcjVa#
See below for required space allocation.

Children or untrained people
may be seriously injured by
this machine. Only install in an
access restricted location.

Electrical Installation
EaVXZi]^hbVX]^cZcZVgVcZm^hi^c\edlZghdjgXZ#
BV`Z hjgZ Vaa edlZg XdgYh VgZ egdiZXiZY [gdb
igV[[^X! bViZg^Va ]VcYa^c\! bd^hijgZ! X]Zb^XVah!
dg di]Zg ]VoVgYh# BV`Z hjgZ id aZVkZ VXXZhh id
V bZVch d[ Y^hXdccZXi^c\ i]Z edlZg hdjgXZ dg
Zc\V\^c\VadX`dji$iV\djiYZk^XZ!^[gZfj^gZY#

Lighting
A^\]i^c\ VgdjcY i]Z bVX]^cZ bjhi WZ VYZfjViZ
Zcdj\]i]VideZgVi^dchXVcWZeZg[dgbZYhV[Zan#
H]VYdlh!\aVgZ!dghigdWZZ[[ZXihi]VibVnY^higVXi
dg^beZYZi]ZdeZgVidgbjhiWZZa^b^cViZY#

2EdlZg8dccZXi^dc

((

(+*$-
Figure 5.B^c^bjbldg`^c\XaZVgVcXZh#
BdYZa<%,%&B[\#H^cXZ($&'

"&("

Moving & Placing
Bandsaw
The Model G0701 is a
heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment to
move the shipping crate
and remove the machine
from the crate.
IV`Z heZX^Va XVgZ l]Zc a^[i^c\ VcY bdk^c\ i]Z
BdYZa <%,%&# JhZ dcan dcZ d[ i]Z [daadl^c\
bZi]dYh id eaVXZ ndjg WVcYhVl ^c ^ih deZgVi^c\
adXVi^dc#

Using Lifting Eye Bolts
1. L^i]i]Z]Zaed[Vcdi]ZgeZghdcidhiZVYni]Z
adVY!jhZi]Z[dg`a^[iidbdkZi]Zh]^ee^c\eVa"
aZiVcYWVcYhVlid^ihdeZgVi^c\adXVi^dc#
2. GZbdkZi]Zh]^ee^c\XgViZ[gdbi]ZeVaaZi#

4. JcWdaii]ZWVcYhVl[gdbi]Zh]^ee^c\eVaaZi#
5. 6iiVX] i]Z hV[Zin a^[i^c\ ]dd`h VcY X]V^ch$
higVeh gViZY [dg Vi aZVhi &%%% aWh# id i]Z
ZnZWdaihVcY[dg`a^[i$]d^hi!i]Zchadlana^[ii]Z
WVcYhVl#
6. 8VgZ[jaan gZbdkZ i]Z h]^ee^c\ eVaaZi VcY
eaVXZi]ZWVcYhVldci]Z[addg#
7. Bdjcii]ZbVX]^cZidi]Z[addgl^i]dcZd[i]Z
dei^dchdjia^cZY^ci]ZcZmihjWhZXi^dc#

Using Wood Shims
1. L^i]i]Z]Zaed[Vcdi]ZgeZghdcidhiZVYni]Z
adVY!jhZi]Z[dg`a^[iidbdkZi]Zh]^ee^c\eVa"
aZiVcYWVcYhVlid^ihdeZgVi^c\adXVi^dc#
2. GZbdkZi]Zh]^ee^c\XgViZ[gdbi]ZeVaaZi#
3. JcWdaii]ZWVcYhVl[gdbi]Zh]^ee^c\eVaaZi#
4. 8VgZ[jaan edh^i^dc i]Z [dg`h d[ i]Z [dg`a^[i
jcYZgi]ZWVcYhVl]ZVY!Vhh]dlc^cFigure
7!i]ZceaVXZV&m)lddYh]^bWZilZZci]Z
]ZVYVcYi]Zg^\]i[dg`VcYV'm)lddYh]^b
WZilZZci]Z]ZVYVcYi]ZaZ[i[dg`#


Note: If you are concerned about your forklift
forks hitting the tension handwheel, remove it
for this step, then re-install it afterward.

3. >chiVaa i]Z a^[i^c\ ZnZ Wdaih! Vh ^aajhigViZY ^c
Figure 6!bV`^c\hjgZi]ZnVgZi]gZVYZYVaa
i]ZlVn^c#
'm)

&m)

Figure 7.Jh^c\lddYh]^bhida^[ii]ZWVcYhVl#

Figure 6.A^[i^c\ZnZWdaih^chiVaaZY#

5. L^i]i]Z]Zaed[Vcdi]ZgeZghdcidhiZVYni]Z
adVY! XVgZ[jaan a^[i i]Z WVcYhVl! gZbdkZ i]Z
h]^ee^c\ eVaaZi! i]Zc eaVXZ i]Z bVX]^cZ dc
i]Z[addg#
6. Bdjcii]ZbVX]^cZidi]Z[addgl^i]dcZd[i]Z
dei^dchdjia^cZY^ci]ZcZmihjWhZXi^dc#

"&)"

BdYZa<%,%&B[\#H^cXZ($&'

Mounting to Shop
Floor
6ai]dj\] cdi gZfj^gZY! lZ gZXdbbZcY i]Vi ndj
bdjci ndjg cZl WVcYhVl id i]Z [addg# 7ZXVjhZ
i]^h ^h Vc dei^dcVa hiZe VcY [addg bViZg^Vah bVn
kVgn! [addg bdjci^c\ ]VgYlVgZ ^h cdi ^cXajYZY#
H8DCC:8I76C9H6L;GDBEDL:G

7Z[dgZ XdccZXi^c\ ndjg WVcYhVl id edlZg [dg
i]Z [^ghi i^bZ VcY eZg[dgb^c\ i]Z Test Run dc
Page 20! ndj BJHI hjXXZhh[jaan XdbeaZiZ i]Z
[daadl^c\ iVh`h ^c i]Z [daadl^c\ dgYZg eZg i]Z
^chigjXi^dchdci]ZgZ[ZgZcXZYeV\Zh/
™
™
™
™

BV`Z hjgZ i]Z WaVYZ ^h igVX`^c\ egdeZgan
Page 16#
6Y_jhii]Zedh^i^kZhideWdaiPage 17#
6hhZbWaZi]Z[ZcXZPage 19#
8dccZXi i]Z WVcYhVl id Vc VYZfjViZ Yjhi
XdaaZXi^dchnhiZbPage 20#

Blade Tracking
Serious personal injury
may occur if the machine
accidentally starts during
this
procedure.
Disconnect the machine
from power and keep
your hands away from
the blade when adjusting
blade tracking.
7aVYZigVX`^c\^hV[[ZXiZYWni]Zi^aid[i]ZjeeZg
l]ZZa `cdlc Vh XZciZg igVX`^c\ VcY i]Z Va^\c"
bZci d[ Wdi] l]ZZah `cdlc Vh XdeaVcVg igVX`"
^c\#
I]Zl]ZZahdci]^hWVcYhVllZgZVa^\cZYVii]Z
[VXidgn!hdXZciZgigVX`^c\^hi]ZdcanVY_jhibZci
i]VicZZYhidWZeZg[dgbZYl]Zci]ZhVl^hcZl
gZ[Zgidi]ZAligning WheelshjWhZXi^dcdcPage
60[dgYZiV^aZY^chigjXi^dchdcXdeaVcVgigVX`^c\#
Note: Changes in the blade tension may change
the blade tracking. For best performance, regularly
check and maintain the proper blade tracking.

"&+"

2. 6Y_jhi i]Z jeeZg VcY adlZg WaVYZ \j^YZh
VlVn [gdb i]Z WaVYZ gZ[Zg id Adjusting
Blade Guide Bearings dc Page 29 [dg
YZiV^aZY^chigjXi^dch#
Note: When adjusting the blade tracking, the
blade must have a reasonable amount of tension to simulate operating conditions. After
the Test Run is successfully completed, you
will perform a thorough version of the following steps to correctly tension the blade.
3. BdkZi]ZWaVYZiZch^dcfj^X`gZaZVhZaZkZgVaa
i]ZlVng^\]iVhk^ZlZY[gdbi]ZgZVgd[i]Z
bVX]^cZ id Veean iZch^dc id i]Z WaVYZ hZZ
Figure 11#

IZch^dc
HXVaZ

Fj^X`
GZaZVhZ
AZkZg

IZch^dc
=VcYl]ZZa
Figure 11.7aVYZiZch^dcXdcigdah#
4. JhZ i]Z iZch^dc ]VcYl]ZZa id Wg^c\ i]Z
ed^ciZgdci]ZiZch^dchXVaZidi]ZVeegdeg^"
ViZbVg`[dgi]ZWaVYZl^Yi]#

The cast iron wheel spokes may have sharp
edges and the blade teeth may extend beyond
the edge of the wheel, creating a laceration
hazard. Wear heavy leather gloves and be
careful when turning the wheels by hand.

BdYZa<%,%&B[\#H^cXZ($&'

5. DeZci]ZjeeZgl]ZZaXdkZg#
6. GdiViZi]ZjeeZgl]ZZaWn]VcYhZkZgVai^bZh
ViaZVhii]gZZVcYlViX]]dli]ZWaVYZg^YZh
dc i]Z l]ZZa Xgdlc# HZZ Figure 12 [dg Vc
^aajhigVi^dcd[i]^hXdcXZei#

7aVYZ8ZciZgZY
dcEZV`d[8gdlc
7aVYZ
8ZciZgZY
dc
L]ZZa

L]ZZa



Note: When the tracking knob is rotated, the
lower portion of the upper wheel will tilt out or
in, which affects the way the blade tracks.

8. He^c i]Z jeeZg l]ZZa l^i] dcZ ]VcY VcY
hadlanVY_jhii]ZigVX`^c\`cdWl^i]i]Zdi]Zg
jci^ai]ZWaVYZg^YZh^ci]ZXZciZgd[i]Zl]ZZa
i^gZl^i]djilVcYZg^c\#
9. I^\]iZc i]Z adX` aZkZg id hZXjgZ i]Z hZii^c\!
i]Zc he^c i]Z jeeZg l]ZZa V\V^c id Xdc[^gb
i]ZigVX`^c\#>[cZXZhhVgn!gZeZViSteps 6–8
jci^a ndj VgZ hVi^h[^ZY l^i] i]Z WaVYZ igVX`"
^c\#
10. GZ"VY_jhi i]Z WaVYZ \j^YZ WZVg^c\h idlVgY
i]ZWaVYZgZ[ZgidPage29#
11. 8adhZ VcY hZXjgZ i]Z jeeZg l]ZZa XdkZg
WZ[dgZWZ\^cc^c\deZgVi^dc#

Figure 12.7aVYZXZciZgigVX`^c\egd[^aZh#
·>[ i]Z WaVYZ g^YZh ^c i]Z XZciZg d[ i]Z
jeeZg l]ZZa VcY ^h XZciZgZY dc i]Z eZV`
d[ i]Z l]ZZa Xgdlc! i]Zc i]Z WVcYhVl ^h
VagZVYn egdeZgan XZciZg"igVX`ZY VcY cd
[jgi]ZgigVX`^c\VY_jhibZcihVgZcZZYZYVi
i]^hi^bZ#
·>[ i]Z WaVYZ YdZh CDI g^YZ ^c i]Z XZciZg
d[i]ZjeeZgl]ZZaVcY^hcdiXZciZgZYdc
i]ZeZV`d[i]Zl]ZZaXgdlc!i]ZcXdci^cjZ
l^i]i]^hegdXZYjgZ#
7. AddhZc i]Z WaVYZ igVX`^c\ adX` aZkZg hd i]Vi
i]Z WaVYZ igVX`^c\ `cdW XVc gdiViZ hZZ
Figure 13#

Adjusting Positive
Stop
6[iZgjh^c\i]ZiVWaZViVi^aid[di]Zgi]Vc%•!i]Z
edh^i^kZ hide Vaadlh i]Z iVWaZ id WZ fj^X`an VcY
VXXjgViZan gZijgcZY id i]Z ]dg^odciVa edh^i^dc ^c
gZaVi^dcidi]ZWaVYZ#I]^h^h^bedgiVci[dgVXXjgViZ
Xjii^c\gZhjaih#
To correctly set the positive stop:
1. 8dggZXian hZi i]Z WaVYZ iZch^dc VcY jhZ i]Z
\j^YZ edhi ZaZkVi^dc Xdcigda id bdkZ i]Z
\j^YZedhiVaai]ZlVnje#
2. 9>H8DCC:8I76C9H6L;GDBEDL:G

7aVYZIgVX`^c\@cdW
AdX`AZkZg

Figure 13.7aVYZigVX`^c\`cdWVcYadX`aZkZg#
BdYZa<%,%&B[\#H^cXZ($&'

"&,"

3. AddhZci]ZiVWaZi^aiadX`]VcYaZ!i]ZcjhZi]Z
iVWaZ i^ai ]VcYl]ZZa id gV^hZ i]Z iVWaZ hZZ
Figure 14#

5. AdlZg i]Z iVWaZ VcY eaVXZ V bVX]^c^hih
hfjVgZ[aVidci]ZiVWaZVcYV\V^chii]Zh^YZ
d[i]ZWaVYZ!Vh^aajhigViZY^cFigure 16#

I^ai=VcYl]ZZa

I^aiAdX`AZkZg
Figure 16.HfjVg^c\iVWaZidi]ZWaVYZ#
Figure 14.IVWaZi^aiZYje#
4. DeZcWdi]l]ZZaXdkZgh!jhZV&,bblgZcX]
idaddhZci]Zedh^i^kZhide_Vbcjih]dlc^c
Figure 15! i]Zc adlZg i]Z edh^i^kZ hide Wdai
hdi]Vi^il^aacdi^ciZg[ZgZl^i]i]ZiVWaZi^ai^c
i]Z[daadl^c\hiZeh#

6. JhZ i]Z iVWaZ i^ai ]VcYl]ZZa id VY_jhi i]Z
iVWaZhfjVgZidi]ZWaVYZ!i]ZcbdkZi]Zi^ai
adX`aZkZgidi]Zg^\]iidhZXjgZi]ZhZii^c\#
7. 6Y_jhi i]Z edh^i^kZ hide Wdai je jci^a ^i _jhi
idjX]Zhi]ZiVWaZ!i]ZcgZ"i^\]iZci]Z_Vbcji
id]daY^i^ceaVXZ#
8. GZ"X]ZX`i]ZiVWaZidbV`ZhjgZ^i^hhfjVgZ
idi]ZWaVYZ#>[cZXZhhVgn!gZeZVii]^hegdXZ"
YjgZjci^andjVgZhVi^h[^ZY#

Edh^i^kZHide
7dai?VbCji

9. AddhZci]ZhXgZldci]ZiVWaZi^aihXVaZed^ci"
Zg!WjiYdcdigZbdkZ^ihZZFigure 17#

HXVaZ
Ed^ciZg

Figure 15.Edh^i^kZhideWdaiVcY_Vbcji#

Figure 17.IVWaZi^aihXVaZed^ciZg#
10. 6a^\c i]Z ed^ciZg i^e l^i] i]Z oZgd dc i]Z
hXVaZ!i]ZcgZ"i^\]iZci]ZhXgZl#
11. 8adhZ VcY hZXjgZ Wdi] l]ZZa XdkZgh WZ[dgZ
WZ\^cc^c\deZgVi^dc#
"&-"

BdYZa<%,%&B[\#H^cXZ($&'

Fence
I]Z[gdci[ZcXZgV^a^hViiVX]ZYidi]ZiVWaZjeh^YZ
YdlcVii]Z[VXidgn[dgh]^ee^c\ejgedhZh#

2. I]gZVYi]ZI"WVgdcidi]ZadX`aZkZgVXdjeaZ
d[ ijgch! Va^\c i]Z gZhVl [ZcXZ hadi VcY i]Z
I"WVg! i]Zc ha^YZ i]Z gZhVl [ZcXZ [jaan dcid
i]ZhiVcYVgY[ZcXZ!Vhh]dlc^cFigure 19#
3. I^\]iZc i]Z adX` aZkZg id hZXjgZ i]Z gZhVl
[ZcXZ^cedh^i^dc#

Properly Attaching Fence Rail
1. GZbdkZi]Zi]gZZXVehXgZlh!adX`lVh]Zgh!
VcY[aVilVh]Zghh]dlc^cFigure 18#

Mounting Fence Assembly
1. Ejaai]Z[ZcXZ]VcYaZje!i]ZceaVXZi]Z[ZcXZ
dci]Z[ZcXZgV^a!Vhh]dlc^cFigure 20#

;ZcXZ
=VcYaZ

m(

Figure 18.;ZcXZgV^a^ci]ZXdggZXiedh^i^dc#
2. ;a^e i]Z [ZcXZ gV^a dkZg VcY gZ"ViiVX] ^i l^i]
i]Z[VhiZcZghgZbdkZY^cStep 1#

Assembling Resaw Fence

Figure 20.;ZcXZVhhZbWanbdjciZYdci]Z
[ZcXZgV^a#
2. IdhZXjgZi]Z[ZcXZ^ceaVXZ!ejh]Ydlcdc
i]Z[ZcXZ]VcYaZ#

1. Ha^YZ i]Z -bb [aVi lVh]Zg dcid i]Z gZhVl
[ZcXZ adX` aZkZg! i]Zc ^chZgi i]Z VhhZbWan
i]gdj\]i]ZhiVcYVgY[ZcXZhZZFigure 19#

AdX`AZkZg
;aViLVh]Zg

GZhVl;ZcXZ
I"7Vg

Figure 19.GZhVl[ZcXZXdbedcZcih#

BdYZa<%,%&B[\#H^cXZ($&'

"&."

Dust Collection
DO NOT operate the Model G0701 without an
adequate dust collection system. This saw
creates substantial amounts of wood dust
while operating. Failure to use a dust collection system can result in short and long-term
respiratory illness.
Recommended CFM
At Each Dust Port: 400 CFM
Do not confuse this CFM recommendation with
the rating of the dust collector. To determine the
CFM at the dust port, you must consider these
variables: (1) CFM rating of the dust collector,
(2) hose type and length between the dust collector and the machine, (3) number of branches
or wyes, and (4) amount of other open lines
throughout the system. Explaining how to calculate these variables is beyond the scope of
this manual. Consult an expert or purchase a
good dust collection "how-to" book.
To connect a dust collection hose:
1. ;^i V ) Yjhi ]dhZ dkZg ZVX] Yjhi edgi! Vh
h]dlc ^c Figure 21! i]Zc hZXjgZ i]Zb ^c
eaVXZl^i]]dhZXaVbeh#
2. Ij\ i]Z ]dhZh id bV`Z hjgZ i]Zn Yd cdi
XdbZ d[[# Note: A tight fit is necessary for
proper performance.

Test Run
DcXZ i]Z VhhZbWan ^h XdbeaZiZ! iZhi gjc ndjg
bVX]^cZ id bV`Z hjgZ ^i gjch egdeZgan VcY ^h
gZVYn[dggZ\jaVgdeZgVi^dc#I]ZiZhigjcXdch^hih
d[kZg^[n^c\i]Z[daadl^c\/
1. I]ZbdidgedlZghjeVcYgjchXdggZXian#
2. I]Z hide Wjiidc VcY `Zn hl^iX] hV[Zin [ZV"
ijgZhldg`XdggZXian#
3. I]Z \j^YZ edhi ZaZkVi^dc bdidg edlZgh je
VcYgjchXdggZXian#
4. I]Z[ddiWgV`Z^hdeZgVi^c\XdggZXian#
5. I]Z jeeZg l]ZZa XdkZg hV[Zin hl^iX] deZg"
ViZhXdggZXian#
>[! Yjg^c\ i]Z iZhi gjc! ndj XVccdi ZVh^an adXViZ
i]ZhdjgXZd[VcjcjhjVacd^hZdgk^WgVi^dc!hide
jh^c\ i]Z bVX]^cZ ^bbZY^ViZan! i]Zc gZk^Zl
TroubleshootingdcPage 49#
>[ ndj XVccdi [^cY V gZbZYn! XdciVXi djg IZX]
HjeedgiVi*,%*)+".++([dgVhh^hiVcXZ#

Before starting the bandsaw, make sure
you have performed the preceding assembly and adjustment instructions, and you
have read through the rest of the manual
and are familiar with the various functions
and safety features on this machine. Failure
to follow this warning could result in serious personal injury or even death!
To test run the machine:
1. BV`ZhjgZndjjcYZghiVcYi]ZhV[Zin^chigjX"
i^dchVii]ZWZ\^cc^c\d[i]ZbVcjVaVcYi]Vi
i]ZbVX]^cZ^hhZijeegdeZgan#
2. BV`Z hjgZ Vaa iddah VcY dW_ZXih jhZY Yjg^c\
hZije VgZ XaZVgZY VlVn [gdb i]Z bVX]^cZ
VcY i]Vi cdi]^c\ dWhigjXih i]Z WaVYZ bdkZ"
bZci#
3. BV`ZhjgZWdi]l]ZZaXdkZghVgZXadhZYVcY
hZXjgZY#

Figure 21.9jhi]dhZhViiVX]ZY#
"'%"

4. 8dccZXii]ZbVX]^cZidi]ZedlZghdjgXZ#

BdYZa<%,%&B[\#H^cXZ($&'

5. Ejh] i]Z D;; Wjiidc ^c! i]Zc il^hi ^i XadX`"
l^hZ hd ^i edeh dji# L]Zc i]Z D;; Wjiidc
edeh dji! i]Z hl^iX] ^h gZhZi VcY gZVYn [dg
deZgVi^dchZZFigure 22#

7. EgZhhi]ZD;;Wjiidcidhidei]ZbVX]^cZ#
8. L>I=DJI gZhZii^c\ i]Z D;; Wjiidc! egZhh
i]Z DC Wjiidc# I]Z bVX]^cZ h]djaY cdi
hiVgi#
·>[i]ZbVX]^cZYdZhcdihiVgi!i]ZD;;Wji"
idchV[Zin[ZVijgZ^hldg`^c\XdggZXian#

OFF Button
Figure 22.GZhZii^c\i]ZD;;Wjiidc#
6. KZg^[ni]Vii]ZbVX]^cZ^hdeZgVi^c\XdggZXian
Wnijgc^c\i]Z`Znhl^iX]id&hZZ Figure
23!i]Zcejh]^c\i]ZDCWjiidc#
·L]Zc deZgVi^c\ XdggZXian! i]Z bVX]^cZ
gjch hbddi]an l^i] a^iiaZ dg cd k^WgVi^dc dg
gjWW^c\cd^hZh#
·>ckZhi^\ViZVcYXdggZXihigVc\ZdgjcjhjVa
cd^hZh dg k^WgVi^dch WZ[dgZ deZgVi^c\ i]Z
bVX]^cZ [jgi]Zg# 6alVnh Y^hXdccZXi i]Z
bVX]^cZ[gdbedlZgl]Zc^ckZhi^\Vi^c\dg
XdggZXi^c\ediZci^VaegdWaZbh#
[ i]Z bVX]^cZ YdZh hiVgi l^i] i]Z hide
Wjiidcejh]ZY^c!^bbZY^ViZanY^hXdccZXi
i]Z bVX]^cZ [gdb edlZg# I]Z D;; Wjiidc
hV[Zin[ZVijgZ^hcdildg`^c\XdggZXian#I]^h
hV[Zin [ZVijgZ bjhi ldg` egdeZgan WZ[dgZ
egdXZZY^c\ l^i] gZ\jaVg deZgVi^dch# 8Vaa
IZX]Hjeedgi[dg]Zae#
9. GZhZii]ZD;;Wjiidc!ijgci]Z`Znhl^iX]id
%!i]ZcegZhhi]ZDCWjiidc#I]ZbVX]^cZ
h]djaYcdihiVgi#
·>[ i]Z bVX]^cZ YdZh cdi hiVgi! i]Z `Zn
hl^iX]hV[Zin[ZVijgZ^hldg`^c\XdggZXian#
·>[ i]Z bVX]^cZ YdZh hiVgi l^i] i]Z `Zn
hl^iX]ijgcZYid%!^bbZY^ViZanegZhhi]Z
D;; Wjiidc VcY Y^hXdccZXi i]Z bVX]^cZ
[gdbedlZg#I]Z`Znhl^iX]hV[Zin[ZVijgZ
^hcdildg`^c\XdggZXian#I]^hhV[Zin[ZVijgZ
bjhildg`egdeZganWZ[dgZegdXZZY^c\l^i]
gZ\jaVg deZgVi^dch# 8Vaa IZX] Hjeedgi [dg
]Zae#
10. Ijgc i]Z `Zn hl^iX] WVX` id &! i]Zc jhZ
i]Z\j^YZedhiZaZkVi^dcXdcigdaidgV^hZVcY
adlZgi]Z\j^YZedhihZZFigure 23#

DC7jiidc

D;;7jiidc
Figure 23.8dcigdaeVcZa#

BdYZa<%,%&B[\#H^cXZ($&'

"'&"

Note: When the foot brake is used, a "kill"
switch stops the flow of power to the machine.
It is the steady pressure on the foot brake
that quickly brings the blade to a full stop.
11. HiVgi i]Z bVX]^cZ! i]Zc Veean hiZVYn egZh"
hjgZidi]Z[ddiWgV`Z#
·>[ i]Z bVX]^cZ ijgch OFF VcY i]Z WaVYZ
XdbZhidVgVe^Yhide!i]Z[ddiWgV`Zhnh"
iZb^hldg`^c\egdeZgan#
·>[ i]Z bVX]^cZ YdZh CDI ijgc OFF! i]Z
[ddiWgV`ZhnhiZb^hcdildg`^c\XdggZXian#
>bbZY^ViZan egZhh i]Z D;; Wjiidc VcY
Y^hXdccZXi i]Z bVX]^cZ [gdb edlZg# I]^h
hV[Zin [ZVijgZ bjhi ldg` egdeZgan WZ[dgZ
egdXZZY^c\ l^i] gZ\jaVg deZgVi^dch# 8Vaa
IZX]Hjeedgi[dg]Zae#

Additional
Adjustments
6[iZg hjXXZhh[jaan XdbeaZi^c\ i]Z Test Run! i]Z
VY_jhibZci egdXZYjgZh a^hiZY WZadl bjhi WZ
eZg[dgbZY id ZchjgZ hV[Z VcY VXXjgViZ Xjii^c\
deZgVi^dch gZ[Zg id i]Z [daadl^c\ hjWhZXi^dch [dg
YZiV^aZY^chigjXi^dch/
™
™
™
™
™
™

12. EgZhh i]Z D;; Wjiidc! lV^i [dg i]Z WaVYZ
id XdbZ id V XdbeaZiZ hide! i]Zc deZc i]Z
jeeZg l]ZZa XdkZg Veegdm^bViZan & id VXi^"
kViZi]ZhV[Zinhl^iX]#


Note: This safety switch is designed to interrupt power to the motors when the door is
open.

13. L]^aZhiVcY^c\idi]ZaZ[id[i]ZbVX]^cZVcY
VlVn [gdb i]Z deZc l]ZZa XdkZg! gZhZi i]Z
D;; Wjiidc VcY egZhh i]Z DC Wjiidc# I]Z
bVX]^cZh]djaYCDIhiVgi#
·>[ i]Z bVX]^cZ YdZh cdi hiVgi! i]Z jeeZg
l]ZZaXdkZghV[Zinhl^iX][ZVijgZ^hldg`"
^c\XdggZXian#I]ZTest Run^hXdbeaZiZ#

EgdeZganiZch^dci]ZWaVYZPage 23#
6a^\ci]ZiVWaZl^i]i]ZWaVYZPage 23#
HfjVgZ i]Z b^iZg \Vj\Z WdYn id i]Z WaVYZ
Page 24#
6a^\ci]Z[ZcXZl^i]i]ZWaVYZPage 25#
8Va^WgViZi]Z[ZcXZed^ciZgPage 26#
6a^\c^c\ i]Z WaVYZ \j^YZ VcY hjeedgi WZVg"
^c\hPage 26#

Tensioning Blade
6egdeZganiZch^dcZYWaVYZ^hZhhZci^Va[dgbV`^c\
VXXjgViZXjih!ZmiZcY^c\i]Za^[Zd[i]ZWaVYZ!VcY
bV`^c\ bVcn di]Zg WVcYhVl VY_jhibZcih# ;dg
^chiVcXZ! ZkZgn i^bZ ndj gZeaVXZ i]Z WaVYZ! ndj
bjhi eZg[dgb i]^h egdXZYjgZ WZXVjhZ Vaa WaVYZh
iZch^dcY^[[ZgZcian#
Note: Before you performed the Test Run, you
set the blade to its approximate tension. The following procedure fine-tunes the blade tension to
ensure accurate cutting results.
To correctly tension the bandsaw blade:

·>[ i]Z bVX]^cZ YdZh hiVgi! ^bbZY^ViZan
egZhh i]Z D;; Wjiidc VcY Y^hXdccZXi i]Z
bVX]^cZ [gdb edlZg# I]Z jeeZg l]ZZa
XdkZghV[Zinhl^iX]^hcdildg`^c\XdggZXian#
I]^h hV[Zin [ZVijgZ bjhi ldg` egdeZgan
WZ[dgZegdXZZY^c\l^i]gZ\jaVgdeZgVi^dch#
8VaaIZX]Hjeedgi[dg]Zae#

1. BV`Z hjgZ i]Z WVcYhVl ^h ijgcZY OFF VcY
i]ZWaVYZ]VhXdbZidVXdbeaZiZhide#
2. JhZi]Z\j^YZedhiZaZkVi^dcXdcigdaidgV^hZ
i]Z\j^YZedhiVaai]ZlVnje!i]ZcbdkZi]Z
jeeZg VcY adlZg \j^YZ$hjeedgi WZVg^c\h Vh
[VgVlVn[gdbi]ZWaVYZVhedhh^WaZgZ[Zgid
Adjusting Blade Guide Bearings dc Page
29[dgYZiV^aZY^chigjXi^dch#


"''"

Note: This procedure will NOT work correctly
if the guide/support bearings are in contact
with the blade.

BdYZa<%,%&B[\#H^cXZ($&'

3. BdkZi]ZWaVYZiZch^dcfj^X`gZaZVhZaZkZgVaa
i]ZlVnidi]Zg^\]iVhk^ZlZY[gdbi]ZgZVg
d[i]ZbVX]^cZidVeeaniZch^dc!i]ZcgdiViZ
i]ZiZch^dc]VcYl]ZZajci^ai]ZbVg`dci]Z
WaVYZiZch^dchXVaZbViX]Zhi]ZdcZ[dgi]Z
WaVYZl^Yi]hZZFigure 24#
Fj^X`
GZaZVhZ
AZkZg

IZch^dc
HXVaZ

Aligning Table
Id ZchjgZ Xjii^c\ VXXjgVXn l^i] i]Z b^iZg \Vj\Z
VcY [ZcXZ! i]Z iVWaZ bjhi WZ Va^\cZY l^i] i]Z
WaVYZ#I]^h^hVegdXZhhd[Va^\c^c\i]ZiVWaZb^iZg
hadihdi]Vi^i^heVgVaaZal^i]i]ZWaVYZ!VcY^hWZhi
YdcZl^i]Vl^YZWaVYZ&dgbdgZ#
To align the table with the blade:
1. BV`Z hjgZ i]Z WaVYZ ^h egdeZgan iZch^dcZY
Page 22VcYigVX`^c\XdggZXianPage 16#
2. 9>H8DCC:8I76C9H6L;GDBEDL:G

IZch^dc
=VcYl]ZZa
Figure 24.7aVYZiZch^dcXdcigdah#

3. EaVXZ i]Z higV^\]iZY\Z [aVi dc i]Z iVWaZ VcY
VXgdhhi]ZWaVYZhdi]Vi^ia^\]ianidjX]ZhWdi]
i]Z[gdciVcYWVX`d[i]ZWaVYZl^i]djiidjX]"
^c\Viddi]!Vhh]dlc^cFigure 25#

4. Ijgci]ZWVcYhVlONVcYlV^i[dgi]ZWaVYZ
idgZVX][jaaheZZY#
5. 9ZXgZVhZWaVYZiZch^dckZgnhadlanWngdiVi"
^c\ i]Z iZch^dc ]VcYl]ZZa XdjciZgXadX`l^hZ
Vh k^ZlZY [gdb VWdkZ jci^a i]Z WaVYZ _jhi
hiVgihid[ajiiZgdgk^WgViZ!i]ZchideYZXgZVh"
^c\i]ZiZch^dc#
6. Cdl! ^cXgZVhZ i]Z iZch^dc Wn gdiVi^c\ i]Z
]VcYl]ZZa ^c i]Z deedh^iZ Y^gZXi^dc XadX`"
l^hZ jci^a i]Z WaVYZ hideh [ajiiZg^c\! i]Zc
gdiViZ i]Z ]VcYl]ZZa Vcdi]Zg &¿) ijgc XadX`"
l^hZ#
7. Ijgci]ZWVcYhVlOFF#

Figure 25.:mVbeaZd[bZVhjg^c\i]ZiVWaZb^iZg
hadiidWZeVgVaaZal^i]i]ZWaVYZ#

8. GZ"VY_jhi i]Z WaVYZ igVX`^c\ Page 16 VcY
i]ZWaVYZ\j^YZhgZ[ZgidPage 29#

NOTICE
When not in use, move the tension quick
release lever to the left to release blade
tension, which will increase blade life and
reduce machine wear.

BdYZa<%,%&B[\#H^cXZ($&'

"'("

4. JhZ i]Z [^cZan ^cXgZbZciZY gjaZg VcY gZXdgY
i]Z Y^hiVcXZ WZilZZc i]Z b^iZg hadi VcY i]Z
[gdciVcYWVX`d[i]ZhigV^\]iZY\Z#
·>[ i]Z Y^hiVcXZh VgZ i]Z hVbZ! cd [jgi]Zg
VY_jhibZcihVgZcZZYZY#
·>[i]ZgZ^hVY^[[ZgZcXZWZilZZci]ZY^hiVcX"
Zh[gdbi]Zb^iZghadiVcYi]ZhigV^\]iZY\Z!
Xdci^cjZl^i]i]^hegdXZYjgZ#
5. ;gdb jcYZgcZVi] i]Z iVWaZ! addhZc i]Z [djg
igjcc^dc XVe hXgZlh i]Vi hZXjgZ i]Z iVWaZ
hZZFigure 26#

Aligning Miter Gauge
Body
Id ZchjgZ VXXjgViZ Xjii^c\ gZhjaih l]Zc jh^c\
i]Z b^iZg \Vj\Z! i]Z b^iZg \Vj\Z WdYn bjhi WZ
Va^\cZYl^i]i]ZWaVYZ#
To align the miter gauge body:
1. BV`Z hjgZ i]Z WaVYZ ^h egdeZgan iZch^dcZY
Page 22VcYigVX`^c\XdggZXianPage 16#
2. >chiVaai]Zl^YZhiWaVYZedhh^WaZVcYXdggZXian
iZch^dc^i#
3. 9>H8DCC:8I76C9H6L;GDBEDL:G
4. AVn i]Z bVX]^c^hih hfjVgZ [aVi dc i]Z iVWaZ
VcY je V\V^chi i]Z WaVYZ l^i]dji idjX]^c\
VcnWaVYZiZZi]!Vhh]dlc^cFigure 27#

Igjcc^dc8Ve
HXgZlh
(d[)h]dlc

AdX`@cdW

Figure 26.Igjcc^dcXVehXgZlh(d[)h]dlc#
6. H]^[i i]Z iVWaZ jci^a i]Z Y^hiVcXZh WZilZZc
i]Zb^iZghadiVcYhigV^\]iZY\ZVgZZfjVa!Vh
bZVhjgZY^cStep 4#
7. GZ"i^\]iZc i]Z igjcc^dc XVe hXgZlh! i]Zc
gZeZVi Step 4# >[ cZXZhhVgn! gZeZVi Steps
4–6jci^andjVgZhVi^h[^ZY#

B^iZg[ i]ZgZ VgZ cd \Veh WZilZZc i]Z b^iZg
\Vj\Z WdYn VcY i]Z hfjVgZ! cd [jgi]Zg
VY_jhibZcihVgZcZZYZY#
·>[i]ZgZVgZ\VehWZilZZci]Zb^iZg\Vj\Z
WdYn VcY i]Z hfjVgZ! Xdci^cjZ l^i] i]^h
egdXZYjgZ#

"')"

BdYZa<%,%&B[\#H^cXZ($&'

6. AddhZci]Zb^iZg\Vj\ZadX``cdWVcYgdiViZ
i]Z \Vj\Z WdYn jci^a ^i ^h [aVi V\V^chi i]Z
hfjVgZ!i]ZcgZ"i^\]iZci]ZadX``cdW#

6. AddhZci]ZXVehXgZlhi]VihZXjgZi]Z[ZcXZ
gV^aidi]ZiVWaZhZZFigure 29!

7. AddhZc i]Z hXgZl i]Vi hZXjgZh i]Z b^iZg
\Vj\Zed^ciZg!hZii]Zed^ciZgidi]Z%•bVg`
dci]ZhXVaZ!i]ZcgZ"i^\]iZci]ZhXgZl#

Aligning Fence
I]Z [ZcXZ bjhi WZ Va^\cZY l^i] i]Z WaVYZ id
ZchjgZVXXjgViZXjii^c\gZhjaih#I]^h^hWZhiYdcZ
WnVa^\c^c\i]Z[ZcXZl^i]i]Zb^iZghadiV[iZgi]Z
iVWaZ^hegdeZganVa^\cZY#
To align the fence with the table:

Figure 29.;ZcXZgV^aXVehXgZlh#

2. 9>H8DCC:8I76C9H6L;GDBEDL:G

7. L^i] i]Z [ZcXZ adX`ZY dcid i]Z [ZcXZ gV^a!
h]^[ii]Z[ZcXZgV^ajci^ai]Z[ZcXZ^hZkZcl^i]
i]Zb^iZghadiVadc\^ihZci^gZaZc\i]!i]ZcgZ"
i^\]iZci]ZgV^aXVehXgZlh#

3. BV`Z hjgZ i]Z iVWaZ ^h egdeZgan Va^\cZY l^i]
i]ZWaVYZ!Vh^chigjXiZY^ci]ZegZk^djhhjW"
hZXi^dc#

8. Ha^YZi]Z[ZcXZVadc\i]ZZci^gZaZc\i]d[i]Z
gV^aidbV`ZhjgZ^iYdZhcdiW^cYV\V^chii]Z
iVWaZ#

1. BV`Z hjgZ i]Z WaVYZ ^h egdeZgan iZch^dcZY
Page 22VcYigVX`^c\XdggZXianPage 16#

4. >[ViiVX]ZY!gZbdkZi]ZgZhVl[ZcXZ#
5. Bdjcii]Z[ZcXZdci]Zg^\]ih^YZd[i]ZWaVYZ
VcY ZkZc l^i] i]Z b^iZg hadi! Vh h]dlc ^c
Figure 28#

·>[ i]Z [ZcXZ YdZh W^cY V\V^chi i]Z iVWaZ!
gZ"addhZc i]Z gV^a XVe hXgZlh VcY ejaa
i]Z gV^a VlVn [gdb i]Z iVWaZ! i]Zc gZeZVi
Steps 7–8#

·>[i]Z[ZcXZ[VXZ^hZkZcl^i]i]Zb^iZghadi
[gdb [gdci"id"WVX`! cd [jgi]Zg VY_jhibZcih
VgZcZXZhhVgn#
·>[i]Z[ZcXZ[VXZ^hcdiZkZcl^i]i]Zb^iZg
hadiVadc\^ihaZc\i]!Xdci^cjZl^i]i]^hegd"
XZYjgZ#

Figure 28.;ZcXZZkZcl^i]i]Zb^iZghadi#
BdYZa<%,%&B[\#H^cXZ($&'

"'*"

Fence Pointer
Calibration

Aligning Blade
Bearings

6[iZgi]Z[ZcXZ^hegdeZganVa^\cZYl^i]i]ZiVWaZ!
l]^X]^hVa^\cZYl^i]i]ZWaVYZ!i]Z[ZcXZed^ciZg
bjhiWZXVa^WgViZYidZchjgZfj^X`VcYVXXjgViZ
edh^i^dc^c\d[i]Z[ZcXZ#

EgdeZgVa^\cbZcid[i]ZWaVYZ\j^YZVcYhjeedgi
WZVg^c\h l^i] i]Z WaVYZ ^h Vc ^bedgiVci eVgi d[
bV`^c\ VXXjgViZ Xjih# L]Zc XdggZXian Va^\cZY!
i]Z\j^YZWZVg^c\hhjeedgiWjiYdcdiXdciVXii]Z
WaVYZ iZZi]! VcY i]Z hjeedgi WZVg^c\ `ZZeh i]Z
WaVYZ [gdb YZ[aZXi^c\ WVX`lVgYh l^i] i]Z [dgXZ
d[Xji#

To calibrate the fence pointer:
1. BV`Z hjgZ i]Z WaVYZ ^h egdeZgan iZch^dcZY
Page 22#

Upper Blade Bearings

2. 9>H8DCC:8I76C9H6L;GDBEDL:G

1. BV`Z hjgZ i]Z WaVYZ ^h egdeZgan iZch^dcZY
Page 22VcYigVX`^c\XdggZXianPage 16#

3. Edh^i^dc i]Z [ZcXZ V\V^chi i]Z aZ[i h^YZ d[
i]Z WaVYZ hd i]Vi ^i ^h idjX]^c\ i]Z WaVYZ
l^i]dji Veean^c\ egZhhjgZ id ^i! Vh h]dlc ^c
Figure 30!i]ZcadX`i]Z[ZcXZ^ceaVXZ#

2. 9>H8DCC:8I76C9H6L;GDBEDL:G
3. ;Vb^a^Vg^oZ ndjghZa[ l^i] i]Z jeeZg WaVYZ
WZVg^c\Xdcigdahh]dlc^cFigures 32–33#
Hjeedgi7ZVg^c\
H]V[i6Y_jhibZci7dai

Figure 30.;ZcXZV\V^chii]ZWaVYZ#
4. AddhZci]Zed^ciZgVY_jhibZcihXgZlh]dlc
^c Figure 31! hZi i]Z ed^ciZg ^c a^cZ l^i] i]Z
% bVg` dc i]Z hXVaZ! i]Zc gZ"i^\]iZc i]Z
hXgZl#

GdiVi^dc
6Y_jhibZci7dai

@cjgaZY@cdW

Figure 32.;gdcijeeZgWaVYZ\j^YZXdcigdah#
H8DCC:8I76C9H6L;GDBEDL:G
3. DeZc Wdi] l]ZZa XdkZgh! i]Zc [Vb^a^Vg^oZ
ndjghZa[l^i]i]ZadlZgWaVYZWZVg^c\Xdcigdah
h]dlc^cFigures 37–39#
Hjeedgi7ZVg^c\
H]V[i6Y_jhibZci7dai

AViZgVaGdY
6Y_jhibZci7dai
Figure 39.GZVgadlZgWaVYZ\j^YZXdcigdah#
4. Id VY_jhi i]Z adlZg WaVYZ WZVg^c\h! [daadl
i]ZhVbZegdXZYjgZjhZY[dgi]ZjeeZgWaVYZ
WZVg^c\hWZ\^cc^c\dci]ZegZk^djheV\Z#
5. 8adhZVcYhZXjgZi]ZadlZgVcYjeeZgl]ZZa
XdkZgh#

Hjeedgi7ZVg^c\
Figure 37.AdlZghjeedgiWZVg^c\Xdcigdah#

@cjgaZY@cdW

GdiVi^dc
6Y_jhibZci7dai
Figure 38.;gdciadlZgWaVYZ\j^YZXdcigdah#

"'-"

BdYZa<%,%&B[\#H^cXZ($&'

Adjusting Blade
Guide Bearings

H8DCC:8I76C9H6L;GDBEDL:G
3. BV`ZhjgZi]ZWaVYZ\j^YZVcYhjeedgiWZVg"
^c\h VgZ egdeZgan Va^\cZY l^i] i]Z WaVYZ! Vh
^chigjXiZYdcPage 26#
4.

;Vb^a^Vg^oZ ndjghZa[ l^i] i]Z jeeZg WaVYZ
WZVg^c\Xdcigdahh]dlc^cFigures 40–41#

Hjeedgi7ZVg^c\
H]V[i6Y_jhibZci7dai

@cjgaZY@cdW

GdiVi^dc
6Y_jhibZci7dai

Figure 41.GZVgjeeZgWaVYZ\j^YZXdcigdah
WaVYZ\jVgYgZbdkZY[dge]didXaVg^in#
5. AddhZci]ZgdiVi^dcVY_jhibZciWdaihdcWdi]
h^YZhd[i]ZWaVYZFigures 40–41#
6. GdiViZi]Z`cjgaZY`cdWhFigure 40idedh^"
i^dc i]Z WZVg^c\h Vh XadhZ id i]Z WaVYZ Vh
edhh^WaZl^i]djiidjX]^c\^i#


Note: Ideally, the bearings should be approximately 0.004" away from the blade, which is
approximately the thickness of paper.

7. GZ"i^\]iZc Wdi] gdiVi^dc VY_jhibZci Wdaih id
hZXjgZi]ZWaVYZWZVg^c\h^ceaVXZ#

GdiVi^dc
6Y_jhibZci7dai

Figure 40.;gdcijeeZgWaVYZ\j^YZXdcigdah
WaVYZ\jVgYgZbdkZY[dge]didXaVg^in#


Note: If you choose, you can remove the two
lower cap screws and the upper hex bolt that
secure the blade guard, then have another
person hold the guard out of the way while
you adjust the upper blade guide and support
bearings.
Make sure to firmly secure the blade guard in
place when you have completed the adjustment.

BdYZa<%,%&B[\#H^cXZ($&'

"'."

Lower Blade Guide Bearings
1. BV`Z hjgZ i]Z WaVYZ ^h egdeZgan iZch^dcZY
Page 22VcYigVX`^c\XdggZXianPage 16#
2. 9>H8DCC:8I76C9H6L;GDBEDL:G

5. DeZcWdi]l]ZZaXdkZgh#
6. IdVY_jhii]ZadlZgWaVYZ\j^YZWZVg^c\h![da"
adl i]Z hVbZ egdXZYjgZ jhZY [dg i]Z jeeZg
WaVYZ\j^YZWZVg^c\hdci]ZegZk^djheV\Z#

3. BV`ZhjgZi]ZWaVYZ\j^YZVcYhjeedgiWZVg"
^c\h VgZ egdeZgan Va^\cZY l^i] i]Z WaVYZ! Vh
^chigjXiZYdcPage 26#
;Vb^a^Vg^oZ ndjghZa[ l^i] i]Z adlZg WaVYZ
WZVg^c\Xdcigdahh]dlc^cFigure 42#

4.

@cjgaZY@cdW

GdiVi^dc
6Y_jhibZci7dai
Figure 42.;gdciadlZgWaVYZ\j^YZXdcigdah#

"(%"

BdYZa<%,%&B[\#H^cXZ($&'

SECTION 4: OPERATIONS
Basic Controls
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.

Damage to your eyes and lungs could result
from using this machine without proper protective gear. Always wear safety glasses and
a respirator when operating this machine.

GZ[Zg id Figures 43–45 VcY i]Z YZhXg^ei^dch
WZadl id WZXdbZ [Vb^a^Vg l^i] i]Z WVh^X Xdcigdah
VcYXdbedcZcihd[ndjgWVcYhVl#
Key Switch/ 9^hVWaZh i]Z DC VcY D;; Wjiidc
l]Zci]Z`Zn^hijgcZYidi]Z%edh^i^dc#:cVWaZh
DCVcYD;;Wjiidcl]Zc`Zn^hijgcZYid&#
ON Button: HiVgih bdidg dcan ^[ i]Z D;; Wjiidc
^hedeeZYdjiVcYi]Z`Znhl^iX]`Zn^hijgcZYid
i]Z&edh^i^dc#
OFF Button:9^hVWaZhi]ZDCWjiidc#:cVWaZi]Z
DC Wjiidc Wn il^hi^c\ i]Z D;; Wjiidc XadX`l^hZ
jci^a^iedehdji#

@ZnHl^iX]

Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.

Dc7jiidc
D[[7jiidc

Figure 43.<%,%&XdcigdaeVcZa[ZVijgZh#

NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY RECOMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.

BdYZa<%,%&B[\#H^cXZ($&'

"(&"

Front Controls

Figure 44

A. Blade Tension Scale/ Egdk^YZh V lVn id
\Vj\Z ]dl bjX] iZch^dc ^h Veea^ZY id i]Z
WaVYZ#
7

B. Blade Tracking Window/ 6aadlh [dg ZVhn
bdc^idg^c\ d[ WaVYZ igVX`^c\ gZ[Zg id Page
16#
C. Guide Post Lock Knob/ AdX`h i]Z \j^YZ
edhihZii^c\gZ[ZgidPage 36#I]ZadX``cdW
bjhi WZ addhZcZY WZ[dgZ bdk^c\ i]Z jeeZg
WaVYZ \j^YZh l^i] i]Z \j^YZ edhi ZaZkVi^dc
Xdcigda!dgi]ZbdidgXdjaYWjgcdji#

6
8

<

9

:

D. Fence, Rails, and Miter Gauge/ 6aadlh [dg
XdcigdaaZYXjii^c\VikVg^djhVc\aZh#
E. Blade Tension Handwheel/IZch^dchWaVYZ
^c\gVYjVa^cXgZbZcih#

;

F. Foot Brake/8jihedlZgidbdidgVcYWg^c\h
i]ZWaVYZidVfj^X`hide#
G. Guide Post Elevation Control/8dcigdahi]Z
edlZgZY \j^YZ edhi bdidg! l]^X] ^h jhZY
id gV^hZ dg adlZg i]Z \j^YZ edhi VcY jeeZg
WaVYZ\j^YZhidi]ZYZh^gZY]Z^\]iVWdkZi]Z
ldg`e^ZXZ#

Figure44#;gdciXdcigdah#

Rear ControlsFigure 45
H. Blade Tension Quick Release Lever:
6Y_jhihWaVYZiZch^dc[dgfj^X`WaVYZX]Vc\"
Zh#
I.

Blade Tracking Knob and Lock Lever:
BdkZhVcYadX`hWaVYZigVX`^c\#

J.

Table Tilt Knob:I^aihi]ZiVWaZjeid*§idi]Z
aZ[idg)*§idi]Zg^\]i#

K. Table Tilt Lock Handle: AdX`h dg jcadX`h
i]ZiVWaZVii]ZXjggZciVc\aZ#

>
=

?

@

Figure 45.GZVgXdcigdah#
"('"

BdYZa<%,%&B[\#H^cXZ($&'

Operation Overview

Cutting Overview

I]^hdkZgk^ZlXdkZghi]ZWVh^XegdXZhhi]Vi]Ve"
eZch Yjg^c\ V WVcYhVl deZgVi^dc# ;Vb^a^Vg^oZ
ndjghZa[l^i]i]^hegdXZhhidWZiiZgjcYZghiVcYi]Z
gZbV^c^c\eVgihd[i]ZOperationhZXi^dc#

I]ZWVcYhVl^hXVeVWaZd[eZg[dgb^c\i]Z[daadl"
^c\Xjih/

To complete a typical operation, the operator
does the following:

™
™
™
™
™

B^iZgh
6c\aZh
GZhVl^c\
G^ee^c\
8gdhhXjii^c\

™
™
™
™
™

8dbedjcY6c\aZh
H^beaZ$8dbeaZm8jgkZh
9jea^XViZEVgih
8^gXaZh
7ZkZaZY8jgkZh

1. :mVb^cZh i]Z ldg`e^ZXZ id bV`Z hjgZ ^i ^h
hj^iVWaZ[dgXjii^c\#

Basic Cutting Tips

2. 6Y_jhihi]Z[ZcXZ[dgi]Zl^Yi]d[i]ZXjiVcY
i]ZcadX`h^i^ceaVXZ#
3. 6Y_jhihi]ZiVWaZi^ai!^[cZXZhhVgn!idi]ZXdg"
gZXiVc\aZd[i]ZYZh^gZYXji#

Here are some basic tips to follow when operating the bandsaw:

4. AddhZchi]Z\j^YZedhiadX``cdW!VY_jhihi]Z
WaVYZ\j^YZ]Z^\]iidWZilZZc&¿)VcY&[gdb
i]Zided[i]Zldg`e^ZXZjh^c\i]Z\j^YZedhi
ZaZkVi^dcXdcigda!i]Zci^\]iZchi]Z\j^YZedhi
adX``cdW#

™

@ZZei]ZjeeZgWaVYZ\j^YZVhhZbWanVY_jhi"
ZYidl^i]^c&d[i]Zldg`e^ZXZ#

™

JhZi]ZXdggZXiWaVYZ[dgi]ZdeZgVi^dc#

™

GZeaVXZ!h]VgeZc!VcYXaZVcWaVYZhVhcZX"
ZhhVgn# BV`Z VY_jhibZcih eZg^dY^XVaan id
`ZZei]ZhVlgjcc^c\^cideXdcY^i^dc#

™

JhZ a^\]i VcY ZkZc egZhhjgZ l]^aZ Xjii^c\#
A^\]iXdciVXil^i]i]ZWaVYZbV`Zh^iZVh^Zgid
[daadla^cZhVcYegZkZcihZmigV[g^Xi^dc!l]^X]
gZYjXZhWaVYZa^[Z#

™

6kd^Yil^hi^c\i]ZWaVYZl]ZcXjii^c\VgdjcY
i^\]iXdgcZgh#6aadli]ZWaVYZidhVlVgdjcY
i]ZXdgcZgh#

™

9d cdi WVX` i]Z ldg`e^ZXZ VlVn [gdb i]Z
WaVYZl]^aZi]ZhVl^hgjcc^c\#

5. 8]ZX`hidbV`ZhjgZi]Zldg`e^ZXZXVchV[Z"
aneVhhVaai]ZlVni]gdj\]i]ZWaVYZl^i]dji
^ciZg[ZgZcXZ[gdbdi]ZgdW_ZXih#
6. EjihdchV[Zin\aVhhZhVcYVgZhe^gVidg#
7. HiVgihi]ZYjhiXdaaZXidgVcYWVcYhVl#
8. =daYhi]Zldg`e^ZXZ[^gbanVcY[aVianV\V^chi
Wdi] i]Z iVWaZ VcY [ZcXZ! VcY i]Zc ejh]Zh
i]Zldg`e^ZXZ^cidi]ZWaVYZViVhiZVYnVcY
XdcigdaaZY gViZ jci^a i]Z ldg`e^ZXZ bdkZh
XdbeaZiZanWZndcYi]ZWaVYZ#


I]Z deZgVidg ^h kZgn XVgZ[ja id `ZZe [^c\Zgh
VlVn[gdbi]ZWaVYZVcYjhZhVejh]hi^X`id
[ZZYcVggdlldg`e^ZXZh#

9. Hidehi]ZWVcYhVl#

BdYZa<%,%&B[\#H^cXZ($&'

"(("

Workpiece
Inspection
HdbZlddYldg`e^ZXZhVgZcdihV[ZidXjidgbVn
gZfj^gZbdY^[^XVi^dcWZ[dgZi]ZnVgZhV[ZidXji#
Before cutting wood, get in the habit of
inspecting all workpieces for the following:
™

›

s

Material Type:I]^hbVX]^cZ^h^ciZcYZY[dg
Xjii^c\cVijgVaVcYbVc"bVYZlddYegdYjXih!
VcYaVb^cViZ"XdkZgZYlddYegdYjXih#8jii^c\
YgnlVaadgXZbZci^i^djhWVX`ZgWdVgYXgZViZh
ZmigZbZan [^cZ Yjhi! l]^X] bVn gZYjXZ i]Z
a^[Z d[ i]Z WZVg^c\h# I]^h bVX]^cZ ^h CDI
YZh^\cZYidXjibZiVa!\aVhh!hidcZ!i^aZ!ZiX#
Foreign Objects (Figure 46):CV^ah!hiVeaZh!
Y^gi!gdX`hVcYdi]Zg[dgZ^\cdW_ZXihVgZd[iZc
ZbWZYYZY ^c lddY# L]^aZ Xjii^c\! i]ZhZ
dW_ZXih XVc WZXdbZ Y^hadY\ZY VcY ]^i i]Z
deZgVidg dg WgZV` i]Z WaVYZ! l]^X] b^\]i
i]Zc [an VeVgi# 6alVnh k^hjVaan ^cheZXi ndjg
ldg`e^ZXZ [dg i]ZhZ ^iZbh# >[ i]Zn XVci WZ
gZbdkZY!9DCDIXjii]Zldg`e^ZXZ#
Large/Loose Knots: AddhZ `cdih XVc
WZXdbZ Y^hadY\ZY Yjg^c\ i]Z Xjii^c\ deZgV"
i^dc# AVg\Z `cdih XVc XVjhZ WaVYZ YVbV\Z#
8]ddhZ ldg`e^ZXZh i]Vi Yd cdi ]VkZ aVg\Z$
addhZ `cdih dg eaVc V]ZVY id Vkd^Y Xjii^c\
i]gdj\]i]Zb#

s

Wet or "Green" Stock: 8jii^c\ lddY l^i]
Vbd^hijgZXdciZcidkZg'%XVjhZhjccZX"
ZhhVgn lZVg dc i]Z WaVYZ VcY n^ZaYh eddg
gZhjaih#

™

Excessive Warping:Ldg`e^ZXZhl^i]ZmXZh"
h^kZXjee^c\!Wdl^c\!dgil^hi^c\VgZYVc\Zg"
djhidXjiWZXVjhZi]ZnVgZjchiVWaZVcYXVc
bdkZjcegZY^XiVWanl]ZcWZ^c\Xji#9DCDI
XjiZmXZhh^kZanlVgeZYlddY#

™

Minor Warping:Ldg`e^ZXZhl^i]ha^\]iXje"
e^c\ XVc WZ hV[Zan hjeedgiZY ^[ i]Z XjeeZY
h^YZ [VXZh i]Z iVWaZ dg [ZcXZ! Vh h]dlc ^c
Figure 47#Dci]ZXdcigVgn!Vldg`e^ZXZhje"
edgiZY dc i]Z WdlZY h^YZ l^aa gdX` Yjg^c\ V
Xji!aZVY^c\idadhhd[Xdcigda#

"()"

Figure 46.8]ddh^c\lddYl^i]dji[dgZ^\c
dW_ZXihZbWZYYZY#

8jil^i]
i]^hh^YZYdlc

8jil^i]
i]^hh^YZYdlc
Figure 47.8jii^c\lddYl^i]b^cdglVge^c\#

Because of its unpredictable nature, use
extreme caution if cutting warped stock. The
difference between acceptable and unacceptable warped stock varies from machine
to machine. If you are in doubt, square-up
the stock first or do not cut it.

BdYZa<%,%&B[\#H^cXZ($&'

Foot Brake

Table Tilt

I]Z BdYZa <%,%& ^h Zfj^eeZY l^i] V [ddi WgV`Z
Figure 48# JhZ i]Z WgV`Z id Xji edlZg id i]Z
bdidgVcYWg^c\i]ZWaVYZidV]Vai#

Personal injury or death
can occur if the bandsaw
starts during table adjustment. Disconnect power
from the bandsaw before
performing table adjustments.

NOTICE
The foot brake will not stop the bandsaw
wheels and blade instantly. DO NOT become
over confident and relax your safety awareness because of the foot brake feature. Make
sure the bandsaw blade has stopped moving completely before leaving the machine.

I]ZWVcYhVliVWaZl^aai^ai*ßaZ[iVcY)*ßg^\]iid
egdk^YZVl^YZgVc\Zd[Xjii^c\dei^dch#
To tilt the table:
1.

9>H8DCC:8I76C9H6L;GDBEDL:G

2. AddhZc i]Z iVWaZ i^ai adX` ]VcYaZ h]dlc ^c
Figure 49#

Figure 48#;ddiWgV`ZadXVi^dc#
AdX`=VcYaZ

IVWaZI^ai=VcYl]ZZa
Figure 49.IVWaZi^aiXdcigdah#
3. Idi^aii]ZiVWaZidi]Zg^\]i!ijgci]ZiVWaZi^ai
]VcYl]ZZaXadX`l^hZFigure 49#
4. Id i^ai i]Z iVWaZ id i]Z aZ[i! ijgc i]Z iVWaZ i^ai
]VcYl]ZZa XadX`l^hZ dcZ ijgc! adlZg i]Z
edh^i^kZ hide Wdai! i]Zc ijgc i]Z ]VcYl]ZZa
XdjciZgXadX`l^hZ#
5. HZXjgZi]ZiVWaZi^aiadX`]VcYaZ#
6. ;daadl Edh^i^kZ Hide ^chigjXi^dch dc Page
17 [dg gZhZii^c\ i]Z hide Wdai VcY iVWaZ [dg
]dg^odciVa%§deZgVi^dch#
BdYZa<%,%&B[\#H^cXZ($&'

"(*"

Guide Post

5. AdX` i]Z \j^YZ edhi ^c eaVXZ l^i] i]Z adX`
`cdW#

I]Zbdidg^oZY\j^YZedhihZZFigure 50bdkZh
i]Z WaVYZ \j^YZ VhhZbWan je dg Ydlc# Id Xji
VXXjgViZan VcY hV[Zan! i]Z Wdiidb d[ i]Z WaVYZ
\j^YZ VhhZbWan bjhi WZ cd bdgZ i]Vc & VWdkZ
i]Z ldg`e^ZXZ Yjg^c\ Xjii^c\ deZgVi^dch·i]^h
edh^i^dc^c\ egdk^YZh i]Z \gZViZhi WaVYZ hjeedgi
VcYb^c^b^oZhi]ZaZc\i]d[bdk^c\WaVYZi]Vi^h
ZmedhZYidi]ZdeZgVidg#

Fine Tune Tracking

To adjust the guide post:

Adjusting the final blade tracking setting
requires the machine to be turned ON.
To fine tune the tracking:

9>H8DCC:8I76C9H6L;GDBEDL:G

1.

NOTICE

2. BV`Z hjgZ i]Vi i]Z WaVYZ iZch^dc! WaVYZ
igVX`^c\!hjeedgiWZVg^c\h!VcYWaVYZ\j^YZh
VgZVY_jhiZYXdggZXian#
3. AddhZc i]Z \j^YZ edhi adX` `cdW h]dlc ^c
Figure 50#

1. 8adhZi]Zl]ZZaXdkZghVcYijgci]ZWVcYhVl
ON#
2. DWhZgkZ i]Z WaVYZ igVX`^c\ eVi] i]gdj\]
i]Z XaZVg l^cYdl dc i]Z g^\]i h^YZ d[ i]Z
WVcYhVl!Vhh]dlc^cFigure 51#

cbdhig^ee^c\Veea^XVi^dch!VhiVcYVgY
gV`Zgiddi]hinaZl^aaWZhj[[^X^ZcigZ[ZgidBlade
informationdcPage 39#

8gdhhXjii^c\^hi]ZegdXZhhd[Xjii^c\VXgdhhi]Z
\gV^cd[lddY#;dgeanlddYVcYdi]ZgegdXZhhZY
lddY! XgdhhXjii^c\ h^bean bZVch Xjii^c\ VXgdhh
i]Zl^Yi]d[i]ZbViZg^Va#
To make a 90˚ crosscut:

To make a rip cut:

1. BVg`i]Zldg`e^ZXZdci]ZZY\Zl]ZgZndj
lVciidWZ\^ci]ZXji#

1. 6Y_jhi i]Z [ZcXZ id bViX] i]Z l^Yi] d[ i]Z
Xjidcndjgldg`e^ZXZVcYadX`i]Z[ZcXZ^c
eaVXZ#

2. 6Y_jhii]ZWaVYZ\j^YZVhhZbWanidi]ZXdg"
gZXi]Z^\]iVcYbV`ZhjgZi]Zb^iZg\Vj\Z^h
hZiid%•dgdi]ZgVc\aZ[dgVc\aZYXjih#

2. 6Y_jhi i]Z WaVYZ \j^YZ VhhZbWan id i]Z Xdg"
gZXi]Z^\]i#

3. BdkZ i]Z [ZcXZ dji d[ i]Z lVn# EaVXZ i]Z
ldg`e^ZXZZkZcanV\V^chii]Zb^iZg\Vj\Z#

3. 6[iZg Vaa hV[Zin egZXVji^dch ]VkZ WZZc bZi!
ijgc i]Z WVcYhVl ON# Hadlan [ZZY i]Z
ldg`e^ZXZ ^cid i]Z WaVYZ VcY Xdci^cjZ l^i]
i]Z Xji jci^a i]Z WaVYZ ^h XdbeaZiZan i]gdj\]
i]Zldg`e^ZXZ#Figure 52h]dlhVine^XVag^e"
e^c\ deZgVi^dc# Note: If you are cutting narrow pieces, use a push stick to protect your
fingers.

4. =daYi]Zldg`e^ZXZV\V^chii]Zb^iZg\Vj\Z
VcYa^cZjei]ZbVg`l^i]i]ZWaVYZ#
5. 6[iZg Vaa hV[Zin egZXVji^dch ]VkZ WZZc bZi!
ijgc i]Z WVcYhVl ON# Hadlan [ZZY i]Z
ldg`e^ZXZ ^cid i]Z WaVYZ VcY Xdci^cjZ i]Z
Xjijci^ai]ZWaVYZ^hVaai]ZlVni]gdj\]i]Z
ldg`e^ZXZ#Figure 53h]dlhVine^XVaXgdhh"
Xjii^c\deZgVi^dc#

Figure 52.:mVbeaZd[ine^XVag^ee^c\deZgVi^dc
l^i]Vejh]hi^X`#

NEVER place fingers or hands in the line of
cut. In the event that something unexpected
happens, your hands or fingers may slip
into the blade. ALWAYS use a push stick
when ripping narrow pieces. Failure to follow these warnings may result in serious
personal injury!
BdYZa<%,%&B[\#H^cXZ($&'

Figure 53.:mVbeaZd[XgdhhXjii^c\deZgVi^dc
l^i]b^iZg\Vj\Z#

"(,"

Resawing
GZhVl^c\ Figure 54 ^h Xjii^c\ V ldg`e^ZXZ
^cidilddgbdgZi]^ccZgldg`e^ZXZh#JhZi]Zl^Y"
ZhiWaVYZedhh^WaZl]ZcgZhVl^c\·Vl^YZWaVYZ
XjihhigV^\]iZgVcY^haZhhegdcZidWaVYZaZVYhZZ
Page 42#;dgbdhiVeea^XVi^dch!jhZVWaVYZl^i]
V ]dd`" dg h`^e"iddi] hinaZ# 8]ddhZ WaVYZh l^i]
[ZlZg iZZi]"eZg"^cX] [gdb ( id +! WZXVjhZ i]Zn
d[[ZgaVg\Zg\jaaZiXVeVX^i^Zh[dgXaZVg^c\hVlYjhi!
gZYjX^c\]ZViWj^aYjeVcYgZYjX^c\higV^cdci]Z
bdidg#

NOTICE
The scale on the front rail will NOT be accurate when using the resaw fence.
4. Hjeedgii]ZZcYhd[i]ZWdVgY^[cZXZhhVgn#
5. Ijgci]ZWVcYhVlON#
6. Jh^c\ ejh] eVYYaZh VcY V ejh] hi^X`! `ZZe
egZhhjgZ V\V^chi i]Z [ZcXZ VcY iVWaZ! VcY
hadlan [ZZY i]Z ldg`e^ZXZ ^cid i]Z bdk^c\
WaVYZ jci^a i]Z WaVYZ ^h XdbeaZiZan i]gdj\]
hZZFigure 54#

Cutting Curves

Figure 54. :mVbeaZd[gZhVl^c\ajbWZg#

When resawing thin pieces, a wandering
blade (blade lead) can tear through the surface of the workpiece, exposing your hands
to the blade teeth. Always use push blocks
when resawing and keep your hands clear
of the blade.

L]Zc Xjii^c\ XjgkZh! h^bjaiVcZdjhan [ZZY VcY
ijgc i]Z hidX` XVgZ[jaan hd i]Vi i]Z WaVYZ [daadlh
i]ZaVndjia^cZl^i]djiil^hi^c\# JhZZ^i]ZgVcVg"
gdlZg WaVYZ dg V WaVYZ l^i] bdgZ IE> iZZi] eZg
^cX]!dgbV`ZbdgZgZa^Z[Xjih!idVkd^Y]Vk^c\id
WVX` i]Z ldg`e^ZXZ VlVn [gdb i]Z WaVYZ! ZheZ"
X^Vaan^[i]ZXjgkZ^hh]Vge#
6alVnh bV`Z h]dgi Xjih [^ghi! i]Zc egdXZZY id
i]Z adc\Zg Xjih# GZa^Z[ Xjih l^aa Vahd gZYjXZ i]Z
X]VcXZi]Vii]ZWaVYZl^aaWZe^cX]ZYdgil^hiZY#
GZa^Z[ Xjih VgZ Xjih bVYZ i]gdj\] i]Z lVhiZ
edgi^dc d[ i]Z ldg`e^ZXZ VcY VgZ hideeZY Vi i]Z
aVndjia^cZ#6hndjXjiVadc\i]ZaVndjia^cZ!lVhiZ
lddY ^h gZaZVhZY [gdb i]Z ldg`e^ZXZ! VaaZk^Vi^c\
VcnegZhhjgZdci]ZWVX`d[i]ZWaVYZ#GZa^Z[Xjih
VahdbV`ZWVX`^c\i]Zldg`e^ZXZdjiZVh^ZgdcXZ
i]ZhVlWaVYZ]VhXdbZidVhide!^[cZZYZY#

To resaw a workpiece:
1. KZg^[ni]Vii]ZWVcYhVl^hhZijeegdeZganVcY
i]Vii]Z[ZcXZ^heVgVaaZaidi]ZWaVYZ#
2. >chiVaa i]Z gZhVl [ZcXZ! hZi ^i id i]Z YZh^gZY
l^Yi]d[Xji!VcYadX`^i^ceaVXZ#
3.

"(-"

6Y_jhi i]Z jeeZg WaVYZ \j^YZ hd ^i ^h &¿)¶&
VWdkZi]Zldg`e^ZXZl^i]Vb^c^bjbVbdjci
d[WaVYZZmedhZY#

NOTICE
The list below displays blade widths and
the corresponding minimum radii for those
blade widths.
Width
Radius
1
⁄8" .................................... 1⁄8"
3
⁄16"................................... 3⁄8"
1
⁄4'' .................................... 5⁄8''
3
⁄8'' .................................... 11⁄4''
1
⁄2'' .................................... 21⁄2''
5
⁄8'' .................................... 33⁄4''
3
⁄4'' .................................... 51⁄2''
BdYZa<%,%&B[\#H^cXZ($&'

Stacked Cuts

Blade Information

DcZ d[ i]Z WZcZ[^ih d[ V WVcYhVl ^h ^ih VW^a^in id
Xjibjai^eaZXde^Zhd[VeVgi^XjaVgh]VeZWnhiVX`"
^c\VcjbWZgd[ldg`e^ZXZhid\Zi]Zg#7Z[dgZbV`"
^c\ hiVX`ZY Xjih! ZchjgZ i]Vi Wdi] i]Z iVWaZ VcY
i]ZWaVYZVgZegdeZganVY_jhiZYid.%•hZZPage
17#Di]Zgl^hZ!VcnZggdgl^aaWZXdbedjcYZY#

HZaZXi^c\ i]Z g^\]i WaVYZ gZfj^gZh V `cdlaZY\Z
d[ i]Z kVg^djh WaVYZ X]VgVXiZg^hi^Xh id bViX] i]Z
WaVYZl^i]i]ZeVgi^XjaVgXjii^c\deZgVi^dc#

To complete a stacked cut:
1. 6a^\c ndjg e^ZXZh [gdb ide id Wdiidb id
ZchjgZ i]Vi ZVX] e^ZXZ ]Vh VYZfjViZ hXgVe
idegdk^YZVXaZVc!jc]VbeZgZYXji#
2. HZXjgZ Vaa i]Z e^ZXZh id\Zi]Zg ^c V bVccZg
i]Vi l^aa cdi ^ciZg[ZgZ l^i] i]Z Xjii^c\# =di
\ajZ dc i]Z ZY\Zh ldg`h lZaa! Vh Yd WgVY
cV^ah i]gdj\] i]Z lVhiZ edgi^dc# 7Z XVgZ[ja
cdiidXji^cidi]ZWgVYhdgndjbVnWgZV`i]Z
WaVYZ
3. Dc i]Z [VXZ d[ i]Z ide e^ZXZ! aVn dji i]Z
h]VeZndj^ciZcYidXji#
4. BV`Z gZa^Z[ Xjih eZgeZcY^XjaVg id i]Z dji"
a^cZ d[ ndjg ^ciZcYZY h]VeZ ^c VgZVh l]ZgZ
X]Vc\Zh ^c WaVYZ Y^gZXi^dc XdjaY higV^c i]Z
lddY\gV^cdgXVjhZi]ZWaVYZ`Zg[idW^cY#

BZVhjgZY Wn i]Z X^gXjb[ZgZcXZ! WaVYZ aZc\i]h
VgZjhjVaanjc^fjZidi]ZWgVcYd[ndjgWVcYhVl
VcYi]ZY^hiVcXZWZilZZcl]ZZah#I]^hhVljhZh
&++¶&+-adc\WaVYZh#GZ[ZgidPage 43[dgWaVYZ
gZeaVXZbZcih#

Blade Width
BZVhjgZY[gdbi]ZWVX`d[i]ZWaVYZidi]Zi^ed[
i]Z WaVYZ iddi] i]Z l^YZhi ed^ci! WaVYZ l^Yi] ^h
d[iZci]Z[^ghiXdch^YZgVi^dc\^kZcidWaVYZhZaZX"
i^dc#7aVYZl^Yi]Y^XiViZhi]ZaVg\ZhiVcYhbVaaZhi
XjgkZi]ViXVcWZXji!VhlZaaVh]dlVXXjgViZan^i
XVcXjiVhigV^\]ia^cZ#
I]^h hVl jhZh WaVYZh [gdb ( ¿ - id &( ¿ - ^c l^Yi]#
6alVnhe^X`i]Zh^oZd[WaVYZi]ViWZhihj^ihndjg
Veea^XVi^dc#
™

Curve Cutting:JhZi]ZX]Vgi^cFigure 56 id
YZiZgb^cZi]ZXdggZXiWaVYZ[dgXjgkZXjii^c\#
9ZiZgb^cZi]ZhbVaaZhigVY^jhXjgkZi]Vil^aa
WZXjidcndjgldg`e^ZXZVcYjhZi]ZXdggZ"
hedcY^c\WaVYZl^Yi]#

7aVYZL^Yi]

5. 8ji i]Z hiVX` d[ e^ZXZh Vh i]dj\] ndj lZgZ
Xjii^c\Vh^c\aZe^ZXZ#;daadlndjgaVndjia^cZ
l^i]i]ZWaVYZ`Zg[dci]ZlVhiZh^YZd[ndjg
a^cZhZZFigure 55#

Blade Length

8jii^c\GVY^jh

Figure 56.7aVYZl^Yi]gVY^^#
Figure 55.Ine^XVahiVX`ZYXji#

BdYZa<%,%&B[\#H^cXZ($&'

"(."

™

Straight Cutting:JhZi]ZaVg\Zhil^Yi]WaVYZ
i]Vi ndj dlc# AVg\Z WaVYZh ZmXZa Vi Xjii^c\
higV^\]ia^cZhVcYVgZaZhhegdcZidlVcYZg#

Tooth Style
Figure 57^aajhigViZhi]Zi]gZZbV^ciddi]hinaZh/

Tooth Pitch
BZVhjgZY Vh IE> iZZi] eZg ^cX]! iddi] e^iX]
YZiZgb^cZh i]Z h^oZ d[ i]Z iZZi]# BdgZ iZZi] eZg
^cX][^cZe^iX]l^aaXjihadlZg!Wjihbddi]Zg0l]^aZ
[ZlZgiZZi]eZg^cX]XdVghZe^iX]l^aaXjigdj\]Zg!
Wji [VhiZg# 6h V \ZcZgVa gjaZ! X]ddhZ WaVYZh i]Vi
l^aa]VkZViaZVhii]gZZiZZi]^ci]ZbViZg^VaViVaa
i^bZh# JhZ [^cZ"e^iX]ZY WaVYZh dc ]VgYZg lddYh
VcYXdVghZ"e^iX]ZYWaVYZhdchd[iZglddYh#

Blade Care
GV`Zg

H`^e

=dd`

Figure 57.GV`Zg!h`^eVcY]dd`iddi]hinaZh#
™

Raker/ 8dch^YZgZY id WZ i]Z hiVcYVgY
WZXVjhZ i]Z iddi] h^oZ VcY h]VeZ VgZ i]Z
hVbZVhi]Ziddi]\jaaZi#I]ZiZZi]dcgV`Zg
WaVYZh jhjVaan VgZ kZgn cjbZgdjh! ]VkZ cd
Vc\aZ! VcY egdYjXZ Xjih Wn hXgVe^c\ i]Z
bViZg^Va# 6h V gZhjai! hbddi] Xjih XVc WZ
VX]^ZkZY l^i]dji Xjii^c\ [Vhi dg \ZcZgVi^c\
bdgZ]ZVii]Vcdi]ZgineZhl]^aZXjii^c\#

™

Skip/H^b^aVgidVgV`ZgWaVYZi]Vi^hb^hh^c\
ZkZgn di]Zg iddi]# 7ZXVjhZ d[ i]Z YZh^\c!
h`^eiddi]ZYWaVYZh]VkZVbjX]aVg\Zg\jaaZi
i]Vc gV`Zg WaVYZh! VcY i]ZgZ[dgZ! Xji [VhiZg
VcY \ZcZgViZ aZhh ]ZVi# =dlZkZg! i]ZhZ
WaVYZh Vahd aZVkZ V gdj\]Zg Xji i]Vc gV`Zg
WaVYZh#

™

Hook/I]ZiZZi]]VkZVedh^i^kZVc\aZYdlc"
lVgYl]^X]bV`Zhi]ZbY^\^cidi]ZbViZg^Va!
VcYi]Z\jaaZihVgZjhjVaangdjcYZY[dgZVh^Zg
lVhiZ gZbdkVa# I]ZhZ WaVYZh VgZ ZmXZaaZci
[dg i]Z idj\] YZbVcYh d[ gZhVl^c\ VcY g^e"
e^c\i]^X`bViZg^Va#

6 WVcYhVl WaVYZ ^h V i]^c e^ZXZ d[ hiZZa i]Vi ^h
hjW_ZXiZY id igZbZcYdjh higV^c# Ndj XVc dWiV^c
adc\ZgjhZ[gdbVWVcYhVlWaVYZ^[ndj\^kZ^i[V^g
igZVibZci VcY ValVnh jhZ i]Z Veegdeg^ViZ [ZZY
gViZ [dg ndjg deZgVi^dc# 7Z hjgZ id hZaZXi WaVYZh
l^i] i]Z egdeZg l^Yi]! hinaZ! VcY e^iX] [dg ZVX]
Veea^XVi^dc#I]Zlgdc\X]d^XZd[WaVYZhl^aad[iZc
egdYjXZjccZXZhhVgn]ZVil]^X]l^aah]dgiZci]Z
a^[Zd[ndjgWaVYZ#
6XaZVcWaVYZl^aaeZg[dgbbjX]WZiiZgi]VcVY^gin
WaVYZ# 9^gin dg \jbbZY je WaVYZh eVhh i]gdj\]
i]Z Xjii^c\ bViZg^Va l^i] bjX] bdgZ gZh^hiVcXZ
i]Vc XaZVc WaVYZh# I]^h ZmigV gZh^hiVcXZ Vahd
XVjhZh jccZXZhhVgn ]ZVi# GZh^c$e^iX] XaZVcZgh
VgZZmXZaaZci[dgXaZVc^c\Y^ginWaVYZh#

Blade Breakage
BVcnXdcY^i^dchbVnXVjhZVWVcYhVlWaVYZid
WgZV`# 7aVYZ WgZV`V\Z ^h jcVkd^YVWaZ! ^c hdbZ
XVhZh!h^cXZ^i^hi]ZcVijgVagZhjaid[i]ZeZXja^Vg
higZhhZh i]Vi WVcYhVl WaVYZh VgZ hjW_ZXiZY id#
7aVYZWgZV`V\Z^hVahdYjZidVkd^YVWaZX^gXjb"
hiVcXZh# 6kd^YVWaZ WgZV`V\Z ^h bdhi d[iZc i]Z
gZhjaid[eddgXVgZdg_jY\ZbZcidci]ZeVgid[i]Z
deZgVidgl]Zcbdjci^c\dgVY_jhi^c\i]ZWaVYZdg
hjeedgi\j^YZh#
The most common causes of blade breakage
are:
™
™
™
™
™
™

")%"

;VjainVa^\cbZci$VY_jhibZcid[i]Z\j^YZh#
;dgX^c\$il^hi^c\Vl^YZWaVYZVgdjcYVh]dgi
gVY^jh#
;ZZY^c\i]Zldg`e^ZXZidd[Vhi#
9jaaiZZi]dgYVbV\ZYiddi]hZi#
DkZg"iZch^dcZYWaVYZ#
IdeWaVYZ\j^YZVhhZbWanhZiidd]^\]VWdkZ
i]Zldg`e^ZXZ#

BdYZa<%,%&B[\#H^cXZ($&'

™
™
™
™

Jh^c\VWaVYZl^i]Vajbendg^begdeZgan[^c"
^h]ZYWgVoZdglZaY#
8dci^cjdjhangjcc^c\i]ZWVcYhVll]Zccdi
^cjhZ#
AZVk^c\WaVYZiZch^dcZYl]Zccdi^cjhZ#
Jh^c\i]Zlgdc\IE>[dgi]Zldg`e^ZXZi]^X`"
cZhh# I]Z \ZcZgVa gjaZ d[ i]jbW ^h i]gZZ
iZZi]^ci]Zldg`e^ZXZViVaai^bZh#

Blade Changes

Replacing a Blade
1. Ha^YZi]ZWaVYZi]gdj\]i]ZiVWaZhadi!Zchjg"
^c\ i]Vi i]Z iZZi] VgZ ed^ci^c\ [dglVgY VcY
Ydlc idlVgY i]Z iVWaZ# Note: If the teeth
will not point downward in any orientation,
the blade is inside-out. Put on heavy gloves,
remove the blade, and twist it right side-out.
2. Ha^ei]ZWaVYZi]gdj\]i]Z\j^YZh!VcYbdjci
^i dc i]Z jeeZg VcY adlZg l]ZZah Figure
58#

Always disconnect power
to the machine when
changing blades. Failure
to do this may result in
serious personal injury.

All saw blades are dangerous and may cause
personal injury. To reduce
the risk of being injured,
wear leather gloves when
handling saw blades.

Removing a Blade
1.

9>H8DCC:8I76C9H6L;GDBEDL:G

2. GZaZVhZi]ZWaVYZiZch^dc#
3. GZbdkZ i]Z iVWaZ ^chZgi VcY i]Z iVWaZ e^c#
6Y_jhii]ZjeeZgVcYadlZg\j^YZWZVg^c\hVh
[VgVlVnVhedhh^WaZ[gdbi]ZWaVYZ#
4. DeZci]ZWdi]l]ZZaXdkZgh!VcYl^i]\adkZY
]VcYh!ha^YZi]ZWaVYZd[[d[Wdi]l]ZZah#

5. Ha^YZi]ZWaVYZi]gdj\]i]Zhadi^ci]ZiVWaZ#

BdYZa<%,%&B[\#H^cXZ($&'

Figure 58.Ine^XVaZmVbeaZd[eaVX^c\WaVYZdc
i]Zl]ZZah#
3. 6Y_jhiiZch^dcVhYZhXg^WZYdcPage 22#
4.

6Y_jhiigVX`^c\^[cZZYZYhZZPage 16#

5. 6a^\ci]ZjeeZgVcYadlZghjeedgiVcY\j^YZ
WZVg^c\h hZZ Page 26! i]Zc VY_jhi i]Z
WaVYZ\j^YZWZVg^c\hhZZPage 29#
6.

GZeaVXZi]ZiVWaZ^chZgiVcYiVWaZe^c#

7. 8adhZi]Zl]ZZaXdkZgh#

NOTICE
When you change the blade or adjust the
tension and tracking, the spaces between
the guide and support bearings will change.
In these cases, you must adjust the upper
and lower guide and support bearings
before continuing with cutting operations
(Pages 26 & 29).

")&"

Blade Lead
7VcYhVl WaVYZh bVn lVcYZg d[[ i]Z Xji a^cZ
l]Zc hVl^c\! Vh h]dlc ^c Figure 59# I]^h ^h
XVaaZYWaVYZaZVY#7aVYZaZVY^hjhjVaanXVjhZYWn
idd[Vhid[V[ZZYgViZ!VYjaadgVWjhZYWaVYZ!dg
^begdeZg iZch^dc# >[ ndjg WaVYZ ^h h]Vge$jcYVb"
V\ZY VcY ndj hi^aa ]VkZ WaVYZ aZVY! eZg[dgb i]Z
[daadl^c\egdXZYjgZh#

2. Ha^YZi]ZWVcYhVl[ZcXZdjid[i]ZlVnVcY
Xji]Va[lVni]gdj\]i]ZWdVgYdci]Za^cZWn
ejh]^c\ ^i ^cid i]Z WaVYZ# Ijgc i]Z WVcYhVl
OFFVcYlV^i[dgi]ZWaVYZidhide#
3. 8aVbei]ZWdVgYidi]ZWVcYhVliVWaZl^i]"
dji bdk^c\ ^i# Cdl ha^YZ i]Z [ZcXZ dkZg id
i]ZWdVgYhd^iWVgZanidjX]ZhdcZZcYd[i]Z
WdVgY#
4. AddhZci]Zi]gZZXVehXgZlhi]VihZXjgZi]Z
[ZcXZ gV^a id i]Z jcYZgh^YZ d[ i]Z iVWaZ hZZ
Page 25#
5. H`Zli]Z[ZcXZhd^i^heVgVaaZaidi]ZZY\Zd[
i]ZhXgVee^ZXZ#
6. L]^aZ bV^ciV^c^c\ i]Z h`Zl! i^\]iZc i]Z XVe
hXgZlhaddhZcZY^cStep 4#
7. BV`ZV[ZlXjihjh^c\i]Z[ZcXZ#>[i]Z[ZcXZ
hi^aa YdZh cdi hZZb eVgVaaZa id i]Z WaVYZ!
gZeZVi Steps 1–6 jci^a i]Z WaVYZ VcY [ZcXZ
VgZeVgVaaZal^i]ZVX]di]Zg#

Figure 59. :mVbeaZd[WaVYZaZVY^c\VlVn[gdb
a^cZd[Xji#

Correcting Blade Lead

To shift the table:
1. DcVhXgVee^ZXZd[lddY!bVg`Va^cZi]Vi^h
eZgeZcY^XjaVgidi]Z[gdciZY\Z#

1. JhZaZhhegZhhjgZl]Zc[ZZY^c\i]Zldg`e^ZXZ
i]gdj\]i]ZXji#

2. 8ji]Va[lVni]gdj\]i]ZWdVgYdci]Za^cZWn
ejh]^c\^i^cidi]ZWaVYZ#

2. 8]ZX`i]Vii]Zb^iZghadidg[ZcXZ^heVgVaaZa
id i]Z WaVYZ a^cZ! VcY XdggZXi ^[ cZXZhhVgn
HZZAligning Table, Page 25VcYAligning
Fence, Page 25#

3. Ijgci]ZWVcYhVlOFFVcYlV^i[dgi]ZWaVYZ
idhide#

3. 8]ZX` [dg egdeZg WaVYZ iZch^dc# >[ i]Z WaVYZ
iZch^dc^hXdggZXiVcY^i^hcdiXdckZc^Zciid
gZeaVXZ i]Z WaVYZ! XdbeZchViZ [dg aZVY Wn
h`Zl^c\i]Z[ZcXZdgh]^[i^c\i]ZiVWaZ#

4. AddhZc i]Z [djg XVe hXgZlh i]Vi bdjci i]Z
iVWaZ id i]Z igjcc^dc# H]^[i i]Z iVWaZ id Xdb"
eZchViZ[dgi]ZWaVYZaZVY!i]ZcgZi^\]iZci]Z
XVehXgZlh#
5. GZeZVi Steps 1–4 jci^a i]Z WaVYZ Xjih
higV^\]i#

To skew your fence:
1. 8jiVe^ZXZd[hXgVelddYVeegdm^bViZan (¿)
i]^X`m(l^YZm&,adc\#DcVl^YZ[VXZd[
i]ZWdVgY!YgVlVhigV^\]ia^cZeVgVaaZaidi]Z
adc\ZY\Z#

")'"

BdYZa<%,%&B[\#H^cXZ($&'

688:HHDG>:H

SECTION 5: ACCESSORIES
Replacement Blades
I]ZhZ gZeaVXZbZci WaVYZh VgZ b^aaZY [dg ZmVXi
iddi] hZi VcY VgZ bVYZ l^i] ]^\] fjVa^in idda
hiZZa#
168" Timber Wolf® Replacement Blades for the
Model G0701.
MODEL
=.*,*
=.*,+
=.*,,
=.*,=.*,.
=.*-%
=.*-&
=.*-'

WIDTH
&

¿'
¿'
&
¿'
&
¿'
&
&
&
&&¿)
&

TPI

T10117—Big Mouth Dust Hood with Stand
8VeijgZ Yjhi [gdb Vcn bVX]^cZ deZgVi^dc l^i]
i]^h7^\Bdji]9jhi=ddY#H^beanViiVX]V)Yjhi
XdaaZXi^dc ]dhZ VcY VY_jhi i]Z ]ddY g^\]i l]ZgZ
ndj cZZY ^i# I]Z [gZZ hiVcY^c\ WVhZ Za^b^cViZh
Xdbea^XViZYbVX]^cZhZi"jehVcYi]Zi^ai^c\&+( ¿ -
m&',¿ -]ddYVY_jhih[gdb'(id)(]^\]#:kZgn
h]decZZYhdcZd[i]ZhZ

(EDH8A6L
)EDH8A6L
+EDH8A6L
&%G6@:G
(EDH8A6L
)EDH8A6L
&%G6@:G
(
¿)E>I8=

G1928—Bandsaw Handbook
I]^h ^h i]Z WVcYhVl W^WaZ# 8dkZgh hiZe"Wn"hiZe
^chigjXi^dch [dg WVh^X$VYkVcXZY Xjii^c\ iZX]"
c^fjZh# 6ahd ^cXajYZh VYkVcXZY bV^ciZcVcXZ!
hZgk^XZ VcY igdjWaZh]ddi^c\ egdXZYjgZh! Vh lZaa
Vh ^c[dgbVi^dc dc WVcYhVl ]^hidgn$YZh^\c VcY
WaVYZbZiVaajg\n#('%eV\Zh#

Figure 61.I&%&&,7^\Bdji]9jhi=ddY#
G7315Z—Super Heavy-Duty E:AB 8AJ™
Mobile Base
I]^heViZciZY!hjeZg]ZVkn"YjinbdW^aZbVX]^cZ
WVhZ ^h i]Z higdc\Zhi bdW^aZ WVhZ dc i]Z bVg"
`Zi# &- m ')&¿' b^c^bjb VcY VY_jhih id '-&¿' m
((&¿'# BVm^bjb &'%% aW# XVeVX^in# I]^h WVhZ ^h
ZmigZbZanhiVWaZl^i]djig^\\ZgineZhjeedgihVcY
V[djgl]ZZahnhiZb#LZ^\]h(-aWh#

Figure 60.7VcYhVl]VcYWdd`#

Figure 62. <,(&*OE:AB8AJ™ BdW^aZ7VhZ#

BdYZa<%,%&B[\#H^cXZ($&'

")("

T20501—Face Shield Crown Protector 4"
T20502—Face Shield Crown Protector 7"
T20503—Face Shield Window
T20452—"Kirova" Anti-Reflective S. Glasses
T20451—"Kirova" Clear Safety Glasses
H0736—Shop Fox® Safety Glasses
H7194—Bifocal Safety Glasses 1.5
H7195—Bifocal Safety Glasses 2.0
H7196—Bifocal Safety Glasses 2.5

H2499—Small Half-Mask Respirator
H3631—Medium Half-Mask Respirator
H3632—Large Half-Mask Respirator
H3635—Cartridge Filter Pair P100
LddY Yjhi ]Vh WZZc a^c`ZY id cVhVa XVcXZg VcY
hZkZgZ gZhe^gVidgn ^aacZhhZh# >[ ndj ldg` VgdjcY
Yjhi ZkZgnYVn! V ]Va["bVh` gZhe^gVidg XVc WZ V
a^[ZhVkZg#6ahdXdbeVi^WaZl^i]hV[Zin\aVhhZh

T20452

T20502

T20503
T20451

H0736

H7194

Figure 63. :nZegdiZXi^dcVhhdgibZci#
H4978—Deluxe Earmuffs - 27dB
H4979—Twin Cup Hearing Protector - 29dB
T20446—Ear Plugs 200 Pair - 31dB
EgdiZXindjg]ZVg^c\WZ[dgZ^ihiddaViZ#:heZX^Vaan
^bedgiVci ^[ ndj dg ZbeadnZZh deZgViZ [dg ]djgh
ViVi^bZ#

Figure 65. =Va["bVh`gZhe^gVidgl^i]Y^hedhVWaZ
XVgig^Y\Z[^aiZgh#
G5562—SLIPIT® 1 Qt. Gel
G5563—SLIPIT® 12 Oz. Spray
G2871—Boeshield® T-9 12 Oz. Spray
G2870—Boeshield® T-9 4 Oz. Spray
H3788—G96 ® Gun Treatment 12 Oz. Spray
H3789—G96 ® Gun Treatment 4.5 Oz. Spray

H4978
T20446
H4979

Figure 64. =ZVg^c\egdiZXi^dcVhhdgibZci#

"))"

Figure 66. GZXdbbZcYZYegdYjXih[dgegdiZXi"
^c\jceV^ciZYXVhi^gdc$hiZZadcbVX]^cZgn#

BdYZa<%,%&B[\#H^cXZ($&'

SECTION 6: MAINTENANCE
Unpainted Cast Iron
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious personal injury.

Schedule
;dg dei^bjb eZg[dgbVcXZ [gdb ndjg bVX]^cZ!
[daadli]^hbV^ciZcVcXZhX]ZYjaZVcYgZ[ZgidVcn
heZX^[^X^chigjXi^dch\^kZc^ci]^hhZXi^dc#

Daily
™
™
™
™

8]ZX`$XdggZXiaddhZbdjci^c\Wdaih#
8]ZX`$XdggZXiYVbV\ZYhVlWaVYZ#
8]ZX`$XdggZXildgcdgYVbV\ZYl^gZh#
8dggZXiVcndi]ZgjchV[ZXdcY^i^dc#

EgdiZXi i]Z jceV^ciZY XVhi ^gdc hjg[VXZh dc i]Z
iVWaZVcY[ZcXZWnl^e^c\i]ZbXaZVcV[iZgZkZgn
jhZ·i]^hZchjgZhbd^hijgZ[gdblddYYjhiYdZh
cdigZbV^cdcWVgZbZiVahjg[VXZh#
@ZZeiVWaZhgjhi"[gZZl^i]gZ\jaVgVeea^XVi^dchd[
egdYjXih a^`Z <.+œ E>Iœ! dg
7dZh]^ZaY œI".hZZSection 5: Accessoriesdc
Page 44[dgbdgZYZiV^ah#

Brushes
I]ZWVcYhVl^hZfj^eeZYl^i]ildadlZgWgjh]Zh#
I]ZWgjh]Zhh]djaYWZX]ZX`ZYYV^anVcYXaZVcZY
l]Zc i]Zn WZXdbZ Y^gin# I]ZgZ VgZ VY_jhibZci
WgVX`Zih i]Vi Vaadl i]Z Wgjh]Zh id WZ VY_jhiZY
[dg Wg^hiaZ lZVg# GZ[Zg id Adjusting Wheel and
Brushes dcPage 55[dgVY_jhibZciYZiV^ah#

Monthly
™
™

™

8]ZX`[dgK"WZaiiZch^dc!YVbV\Z!dglZVg#
GZbdkZWaVYZVcYi]dgdj\]anXaZVcVaaWj^ai"
je hVlYjhi [gdb i]Z gjWWZg i^gZh dc i]Z
l]ZZah#
8aZVc$kVXjjbYjhiWj^aYje[gdb^ch^YZXVW^"
cZiVcYd[[bdidg#

Lubrication
H^cXZ Vaa WZVg^c\h VgZ hZVaZY VcY eZgbVcZcian
ajWg^XViZY! h^bean aZVkZ i]Zb VadcZ jci^a i]Zn
cZZYidWZgZeaVXZY#9dcdiajWg^XViZi]Zb#

Cleaning

I]^hbVX]^cZYdZhcZZYajWg^XVi^dc^cdi]ZgeaVX"
Zh#6cZhhZci^VaeVgid[ajWg^XVi^dc^hXaZVc^c\i]Z
XdbedcZcihWZ[dgZajWg^XVi^c\i]Zb#

8aZVc^c\ i]Z BdYZa <%,%& ^h gZaVi^kZan ZVhn#
KVXjjb ZmXZhh lddY X]^eh VcY hVlYjhi! VcY
l^eZd[[i]ZgZbV^c^c\Yjhil^i]VYgnXadi]#>[Vcn
gZh^c]VhWj^aije!jhZVgZh^c"Y^hhdak^c\XaZVcZg
idgZbdkZ^i#IgZViVaajceV^ciZYXVhi^gdcVcYhiZZa
l^i]Vcdc"hiV^c^c\ajWg^XVciV[iZgXaZVc^c\#

I]^hhiZe^hXg^i^XVaWZXVjhZYjhiVcYX]^ehWj^aY
jedcajWg^XViZYXdbedcZcih!l]^X]bV`Zhi]Zb
]VgYidbdkZ#H^beanVYY^c\bdgZ\gZVhZidWj^ai"
je\g^bZl^aacdigZhjai^chbddi]bdk^c\eVgih#

BdYZa<%,%&B[\#H^cXZ($&'

8aZVci]ZXdbedcZcih^ci]^hhZXi^dcl^i]b^cZgVa
he^g^ihdgVcd^a$\gZVhZhdakZciXaZVcZg#

")*"

Blade Guide Rack and Pinion

Tension Adjustment Assembly

Lubricant

Frequency

Qty

Lubricant

Frequency

Qty

Bjai^"ejgedhZ
H8DCC:8I76C9H6L;GDBEDL:G

2. 9>H8DCC:8I76C9H6L;GDBEDL:G

2.

DeZc i]Z ide l]ZZa XdkZg VcY add` i]gdj\]
i]Zided[i]Zl]ZZa#

3. Jh^c\VgV\VcYb^cZgVahe^g^ih!l^eZd[[Vcn
Zm^hi^c\ \gZVhZ VcY hVlYjhi Wj^aYje dc i]Z
gVX`hZZFigure 67#

3. Jh^c\VgV\VcYb^cZgVahe^g^ih!l^eZd[[Vcn
Zm^hi^c\ \gZVhZ VcY hVlYjhi Wj^aYje dc i]Z
WaVYZiZch^dcVY_jhibZciVhhZbWanVcYiZc"
h^dcaZkZgXVb#
4. 6eeanVi]^cXdVid[bjai^"ejgedhZH8DCC:8I76C9H6L;GDBEDL:G

9>H8DCC:8I76C9H6L;GDBEDL:G

2. L^i]i]ZiVWaZeZgeZcY^XjaVgidi]ZWaVYZ!VcY
jh^c\ V gV\ VcY b^cZgVa he^g^ih! l^eZ d[[ Vaa
Zm^hi^c\\gZVhZVcYhVlYjhiWj^aYje[gdbi]Z
gVX`#

2. BdkZ i]Z iVWaZ je jci^a ^i gZVX]Zh ^ih bVm^"
bjb )*ß Vc\aZ! i]Zc jhZ V gV\ VcY b^cZgVa
he^g^ihidl^eZd[[VaaZmXZhh\gZVhZVcYhVl"
Yjhi[gdbi]Zigjcc^dc#
3.

3. BdkZi]ZiVWaZjeid^ihbVm^bjb)*ßVc\aZ
VcYl^eZd[[VaaZm^hi^c\\gZVhZVcYhVlYjhi
Wj^aYje[gdbi]ZgVX`Figure 69#

6eean V i]^c XdVi d[ bjai^"ejgedhZ H8DCC:8I76C9H6L;GDBEDL:G
2. Ejidc]ZVknaZVi]Zg\adkZh#

6hi]ZWVcYhVlV\Zh!i]ZgjWWZgi^gZhbVncZZY
id WZ gZYgZhhZY ^[ i]Zn WZXdbZ ]VgYZcZY dg
\aVoZYdkZg#GZYgZhh^c\i]ZgjWWZgi^gZh^begdkZh
WaVYZigVX`^c\VcYgZYjXZhk^WgVi^dc$WaVYZaZVY#
>[ i]Z gjWWZg i^gZh WZXdbZ idd ldgc! i]Zc WaVYZ
igVX`^c\ l^aa WZXdbZ ZmigZbZan Y^[[^Xjai# 6i i]Vi
ed^ci! gZYgZhh^c\ l^aa cd adc\Zg WZ Z[[ZXi^kZ VcY
i]Zi^gZhbjhiWZgZeaVXZY#

3. GZbdkZi]ZWaVYZ#
4. 8aZVc Vcn Wj^ai"je hVlYjhi [gdb i]Z gjWWZg
i^gZh#
5. =daY &%% \g^i hVcYeVeZg V\V^chi i]Z gjW"
WZg i^gZ VcY gdiViZ i]Z l]ZZa Wn ]VcY# Dcan
gZYgZhhi]ZgjWWZgZcdj\]idZmedhZV[gZh]
gjWWZghjg[VXZ#
6. GZ"^chiVaai]ZWaVYZ!i]ZcX]ZX`WaVYZiZch^dc
gZ[ZgidPage 22VcYigVX`^c\gZ[ZgidPage
16#

")-"

BdYZa<%,%&B[\#H^cXZ($&'

SECTION 7: SERVICE
GZk^Zli]ZigdjWaZh]ddi^c\VcYegdXZYjgZh^ci]^hhZXi^dcid[^mdgVY_jhindjgbVX]^cZ^[VegdWaZbYZkZa"
deh#>[ndjcZZYgZeaVXZbZcieVgihdgndjVgZjchjgZd[ndjggZeV^gh`^aah!i]Zc[ZZa[gZZidXVaadjgIZX]c^XVa
HjeedgiVi*,%*)+".++(#

Troubleshooting
Hnbeidb

Edhh^WaZ8VjhZ

BVX]^cZ YdZh cdi &# :bZg\ZcXnD;;WjiidcZc\V\ZY$Vi[Vjai#
hiVgi dg V WgZV`Zg '# @Znhl^iX]ijgcZYid%edh^i^dc#
ig^eh#
(# JeeZgl]ZZaXdkZghV[Zinhl^iX]Y^hZc\V\ZY$
Vi[Vjai#
)# 7gV`Zhl^iX]Vi[Vjai#
*# I]ZgbVa dkZgadVY gZaVn ^c bV\ hl^iX]
ig^eeZY#
+# 7gZV`dgh]dgi^cl^g^c\0dgaddhZdgXdggdYZY
XdccZXi^dch#
,# Eaj\ dg gZXZeiVXaZ ^h XdggdYZY dg b^h"
l^gZY#
-# EdlZg hjeean hl^iX]ZY d[[$]Vh ^cXdggZXi
kdaiV\Z#
.# BdidgXdccZXi^dcl^gZY^cXdggZXian#
&%#8dciVXidg]VheddgXdciVXihdg^hVi[Vjai#
&&#7adlc[jhZ$ig^eeZYX^gXj^iWgZV`Zg#
&'#BdidgDChl^iX]Vi[Vjai#
&(#HiVgiXVeVX^idg]VhWadlc#
&)#8Zcig^[j\Vahl^iX]Vi[Vjai#
&*#BdidgVi[Vjai#

Edhh^WaZHdaji^dc
&# GdiViZWjiidcidgZhZi$gZeaVXZWjiidc#
'# Ijgc`Znhl^iX]id&edh^i^dc#
(# 8adhZjeeZgl]ZZaXdkZgdgVY_jhi$gZeaVXZhl^iX]#
)# GZ"VY_jhi$iZhi$gZeaVXZWgV`Zhl^iX]#
*# 6aadl gZaVn$bdidg id Xdda# >[ cZXZhhVgn! egZhh gZhZi
Wjiidc^ch^YZhl^iX]#
+# IgVXZ$gZeaVXZ Wgd`Zc dg XdggdYZY l^gZh0 [^m addhZ
XdccZXi^dch#
,# 8dggZXii]Zl^g^c\#
-# Hl^iX]edlZghjeeandc$kZg^[nkdaiV\Z#
.# L^gZ bdidg XdggZXian# GZ[Zg id ^ch^YZ _jcXi^dc Wdm
XdkZgdgPage 65#
&%#IZhiVaaaZ\h[dgedlZg!iZhi[^ZaYXd^a!VcY[^mXdciVXih
dggZeaVXZ^[Vi[Vjai#
&&#GZeaVXZ$gZhZi[jhZdgX^gXj^iWgZV`Zg#GZeV^gedhh^WaZ
h]dgidgX^gXj^idkZgadVY#
&'#GZeaVXZhl^iX]#
&(#IZhi$gZeaVXZ^[Vi[Vjai#
&)#6Y_jhi$gZeaVXZXZcig^[j\Vahl^iX]#
&*#IZhi[dgh]dgiZYl^cY^c\hdgWVYWZVg^c\h0gZeV^gdg
gZeaVXZ#

BV^cbdidgX]ViiZgh &# EdlZghjeean]Vh^cXdggZXikdaiV\ZdcdcZ &# 8dciVXiZaZXig^X^VcidX]ZX`^cXdb^c\kdaiV\Z#
Yjg^c\hiVgijedg
dgbdgZaZ\h#
Yjg^c\deZgVi^dc#

BdYZa<%,%&B[\#H^cXZ($&'

")."

Hnbeidb

Edhh^WaZ8VjhZ

Edhh^WaZHdaji^dc

BVX]^cZ]Vh
ZmXZhh^kZk^WgVi^dc
dgcd^hZ#

&#
'#
(#
)#

BVX]^cZhiVaah
dghadlhl]Zc
deZgVi^c\#

&# Idd bjX] egZhhjgZ l]Zc [ZZY^c\ &# GZYjXZegZhhjgZl]Zc[ZZY^c\ldg`e^ZXZ#
ldg`e^ZXZ#
'# Ldg`e^ZXZiddbd^hidgbViZg^Vacdihj^iVWaZ '# Dcan Xji lddY VcY ZchjgZ ldg`e^ZXZ bd^hijgZ ^h
WZadl'%#
[dgbVX]^cZ#

I^\]iZcK"WZai#HZZPage 53.
GZeaVXZWaVYZPage41#
I^\]iZcWaVYZ#
JhZ[^aZdghidcZidhbddi]VcYgdjcYi]ZWVX`d[i]Z
WaVYZ#
*# I^\]iZcaddhZXdbedcZci#
+# AZkZa$h]^b WVhZ0 i^\]iZc$VY_jhi bdjci^c\ ]VgYlVgZ
dg[ZZi#
,# ;^m$gZeaVXZ [Vc XdkZg0 gZeaVXZ addhZ dg YVbV\ZY
,# Bdidg[VcgjWW^c\dc[VcXdkZg#
[Vc#
-# GZeaVXZK"WZaijhZa^c`WZaih^[edhh^WaZ#HZZPage
-# K"WZaildgcdgYVbV\ZY#
54#
.# 6Y_jhil]ZZahidWZXdeaVcVgPage 60#
.# L]ZZahcdiXdeaVcVg#
&%#GZeaVXZ$VY_jhii]ZK"WZaiPage 54#
&%#K"WZai]VhV]^\]hedi#
&&#8Zcig^[j\Va hl^iX] dji d[ VY_jhibZci0 Vi &&#6Y_jhi$gZeaVXZXZcig^[j\Vahl^iX]#
[Vjai#
&'#EjaaZnaddhZdgcdi^cVa^\cbZci0h]V[iWZci# &'#GZeaVXZldgcejaaZn!`Zn!VcYh]V[i!VcYgZVa^\c#
&(#8]ZX`$gZeaVXZl]ZZaWZVg^c\#
&(#Ldgcl]ZZaWZVg^c\#
&)#GZeaVXZdggZ"^chiVaal]ZZah#
&)#L]ZZai^gZhldgcdg^cXdggZXian^chiVaaZY#
&*#GZeaVXZl]ZZah#
&*#L]ZZahdjid[WVaVcXZ#
&+#GZeaVXZbdidgWZVg^c\hdggZeaVXZbdidg#
&+#BdidgWZVg^c\hldgcdgYVbV\ZY#
K"WZaiiZch^dc^cXdggZXi#
7Zci!Yjaa!dgYVbV\ZYWaVYZ#
AddhZWaVYZ#
7aVYZ lZaY XdciVXi^c\ hjeedgi WZVg^c\ dg
WaVYZ\j^YZh#
*# AddhZbVX]^cZXdbedcZci#
+# BVX]^cZ^cXdggZXianbdjciZYdc[addg#

(#
)#
*#
+#
,#

Ldg`e^ZXZ^hlVgeZY#
;ZcXZ^cXdggZXianVY_jhiZY#
K"7Zaihha^ee^c\#
GjcXVeVX^idgVi[Vjai#
BdidgXdccZXi^dcl^gZY^cXdggZXian#

-# BdidgdkZg]ZViZY#
.# 8dciVXidg]VheddgXdciVXihdg^hVi[Vjai#
&%#8Zcig^[j\Vahl^iX]Vi[Vjai#
&&#BV^cbdidgVi[Vjai#

&#
'#
(#
)#

(#
)#
*#
+#
,#

HigV^\]iZcldg`e^ZXZdgjhZVY^[[ZgZcidcZ#
6Y_jhi$XVa^WgViZ[ZcXZ#
IZch^dc$gZeaVXZWZaih0ZchjgZejaaZnhVgZVa^\cZY#
IZhi$gZeV^g$gZeaVXZ#
GZk^Zll^g^c\Y^V\gVbdcbdidgXdkZg0XdggZXil^gZ
XdccZXi^dch#
-# AZiXdda!XaZVcbdidg!VcYgZYjXZldg`adVY#
.# IZhiVaaaZ\h[dgedlZg!iZhi[^ZaYXd^a!VcY[^mXdciVXih
dggZeaVXZ^[Vi[Vjai#
&%#6Y_jhi$gZeaVXZXZcig^[j\Vahl^iX]^[VkV^aVWaZ#
&&#IZhi [dg h]dgiZY l^cY^c\h! WVY WZVg^c\h VcY gZeV^g
dggZeaVXZ#

&# ^hiddXdVghZ#
(# I]ZWaVYZ^haddhZVcYha^ee^c\dcl]ZZah#
)# 7aVYZigVX`^c\^h^cXdggZXi#
*# I]ZWaVYZ]Vhb^hh^c\dgWZciiZZi]#
+# I]ZWaVYZ]VhV[VjainlZaY#

Edhh^WaZHdaji^dc

&#
'#
(#
)#
*#
+#

9ZXgZVhZi]Z[ZZYgViZ#
JhZi]ZXdggZXiWaVYZ[dgbViZg^VaVcYheZZYd[Xji#
6Y_jhiWVYZiZch^dcVhgZfj^gZY#
6Y_jhii]ZWaVYZigVX`^c\WVX`idcdgbVa#
GZeaVXZi]ZWaVYZPage41#
GZeaVXZi]ZWaVYZPage41#

&#
'#
(#
)#

6Y_jhiWaVYZiZch^dcPage 22#
JhZXdggZXiWaVYZ[dgVeea^XVi^dc#
GZYjXZ[ZZYgViZdgVY_jhiWaVYZheZZYPage 33#
JhZVl^YZgVgXdcdjih^YZXjih!dgjhZgZa^Z[Xjihid
bV`Zi^\]i^ch^YZXjih#
*# GZeaVXZi]ZWaVYZPage41#
+# 6Y_jhii]ZWaVYZigVX`^c\WVX`idcdgbVaPage 16#
*# 7aVYZjhZYl]ZcYjaa#
,# 6Y_jhi WaVYZ \j^YZ WZVg^c\h [dg XdggZXi WaVYZ
+# 7aVYZigVX`^c\^hlgdc\#
hjeedgi#
,# 7aVYZ\j^YZVY_jhibZciVi[Vjai#
-# 6Y_jhi jeeZg WaVYZ \j^YZh Vh XadhZ Vh edhh^WaZ id
ldg`e^ZXZ#
-# >cVYZfjViZWaVYZhjeedgi#
.# GZeaVXZl^i]VcZlWaVYZPage41#
.# 7aVYZlZaYVi[Vjai#
&%#GZeaVXZdggZ"^chiVaal]ZZah#
&%#L]ZZai^gZhldgcdg^cXdggZXian^chiVaaZY#
&&#;ZcXZ dg b^iZg hadi dji d[ Va^\cbZci l^i] &&#6a^\c iVWaZ b^iZg hadi VcY [ZcXZ l^i] WaVYZ Page
25#
WaVYZ#

7aVYZdgiZZi]
WgZV`#

&# 7aVYZiZch^dc^h^cXdggZXi#
'# >cXdggZXiWaVYZ[dgVeea^XVi^dc#
(# I]Z[ZZY^hidd]ZVkndgWaVYZheZZY^hidd
hadl#
)# 8jii^c\XdgcZghiddh]Vgean#

7aVYZlZVghdc
dcZh^YZ!hadlh!
hbd`Zhdgh]dlh
dkZg]ZVi^c\#

&# 7aVYZXdciVXi^c\iVWaZ^chZgi#

HVlYjhiWj^aYje
^ch^YZXVW^cZi#

&# 8aZVcdjiYjhiedgi#
&# 8ad\\ZYYjhiedgi#
'# Adl 8;B V^g[adl [gdb Yjhi XdaaZXi^dc '# GZeV^gYjXi^c\[dgaZV`hdgXad\h!bdkZYjhiXdaaZXidg
XadhZgidbVX]^cZ!^chiVaaVhigdc\ZgYjhiXdaaZXidg#
hnhiZb#

&# 6Y_jhiWaVYZ\j^YZWZVg^c\hidZa^b^cViZZmXZhhh^YZ
egZhhjgZ# 6Y_jhi iVWaZ [dg XdggZXi WaVYZ XaZVgVcXZ
VcYb^iZghadiVa^\cbZci#
'# I]ZWaVYZ\j^YZhVgZldgcdgb^h"VY_jhiZY# '# 6Y_jhidggZeaVXZi]ZWaVYZ\j^YZh#
(# 6Y_jhii]ZWaVYZ\j^YZhjeedgiWZVg^c\hXdggZXian#
(# I]ZWaVYZ]Vh^chj[[^X^Zcihjeedgi#
)# 8]ZX` WaVYZ Y^gZXi^dc Vh YZhXg^WZY ^c GZeaVX^c\
)# 7aVYZ^h^chiVaaZYWVX`lVgYh#
7aVYZdcPage 41VcYgZkZghZWaVYZ^[cZXZhhVgn#
*# Idd bjX] h^YZ egZhhjgZ l]Zc [ZZY^c\ *# ;ZZYldg`e^ZXZhigV^\]i^cidi]ZWaVYZ#
ldg`e^ZXZ#
+# 6Y_jhii]Zl]ZZahhdi]ZnVgZXdeaVcVgPage 60#
+# I]Zl]ZZahVgZdjid[Va^\cbZci#
,# GZeaVXZWaVYZPage41#
,# 9jaadg^cXdggZXiWaVYZ#
-# >chiVaacZlWaVYZ#
-# 7aVYZ^hYZ[dgbZY#
.# ;ZcXZ cdi eVgVaaZa l^i] WaVYZ egZhhjgZ Vi .# 6Y_jhi[ZcXZeVgVaaZal^i]WaVYZPage 25#
WaVYZWVX`h^YZ#
&%#IVWaZidehjg[VXZ^hcdieVgVaaZadghfjVgZid &%#6Y_jhi$h]^b iVWaZ$igjcc^dc edh^i^dc jci^a WaVYZ VcY
iVWaZVgZeVgVaaZaVcYhfjVgZ#
WaVYZ#

BdYZa<%,%&B[\#H^cXZ($&'

"*&"

Hnbeidb

Edhh^WaZ8VjhZ

Edhh^WaZHdaji^dc

7aVYZigVX`h
^cXdggZXian!dg
XdbZhd[[l]ZZah#

&#
'#
(#
)#
*#
+#
,#

&#
'#
(#
)#
*#
+#
,#

IgVX`^c\^hcdiVY_jhiZYegdeZgan#
L]ZZahVgZcdiXdeaVcVg#
7aVYZiZch^dc^hiddaddhZ#
7aVYZ\j^YZhcZZYVY_jhibZci#
;ZZY^c\ldg`e^ZXZidd[Vhi#
>cXdggZXiWaVYZ[dgWVcYhVl#
7aVYZ^hYZ[dgbZY!ldgcdgYjaa#

-# GjWWZgi^gZdcl]ZZa^hYVbV\ZYdgldgc#
I]ZXji^hXgdd`ZY!
dgi]ZWaVYZ
lVcYZghWaVYZ
aZVY#

&# I]Z [ZZY egZhhjgZ ^h idd ]^\] dg i]Z WaVYZ
heZZY^hiddhadl#
'# I]ZWaVYZiZch^dc^hadl#
(# I]ZWaVYZ^hYjaadgYVbV\ZY#
)# >cVYZfjViZWaVYZhjeedgi#
*#
+#
,#
-#
.#

"*'"

6Y_jhiigVX`^c\Page 16#
6Y_jhil]ZZaXdeaVcVg^inPage 60#
>cXgZVhZWaVYZiZch^dcPage 22#
6a^\cVcYVY_jhiWaVYZ\j^YZhPages 26"29#
;ZZYldg`e^ZXZhadlZgPage 33#
>chiVaaXdggZXiWaVYZ[dgbVX]^cZ#
>chiVaacZlWaVYZ!VcYYZ"iZch^dcWaVYZl]Zccdi^c
jhZ#
-# GZeaVXZl]ZZah#
&# 6Y_jhi[ZZYgViZVcYXjii^c\heZZYVhgZfj^gZY#

'# >cXgZVhZi]ZWaVYZiZch^dcPage 22#
(# GZeaVXZi]ZWaVYZPage41#
)# 6Y_jhijeeZgWaVYZ\j^YZhd^i^hVhXadhZVhedhh^WaZ
idldg`e^ZXZPage 36#
*# JhZl^YZgWaVYZ#
>cXdggZXiWaVYZ[dgVeea^XVi^dc#
+# 6Y_jhii]ZWaVYZigVX`^c\WVX`idcdgbVa#
I]ZWaVYZigVX`^c\^hlgdc\#
,# I^\]iZc iVWaZ igjcc^dc bdjci^c\ Wdaih dg i^ai adX`
IVWaZ^haddhZ#
aZkZg#
;ZcXZ dg b^iZg hadi dji d[ Va^\cbZci l^i] -# 6a^\ciVWaZb^iZghadiVcY[ZcXZl^i]WaVYZ#
WaVYZ#
.# 6Y_jhi WaVYZ \j^YZ WZVg^c\h [dg XdggZXi WaVYZ
7aVYZ\j^YZVa^\cbZciVi[Vjai#
hjeedgi#

BdYZa<%,%&B[\#H^cXZ($&'

Checking and
Tensioning V-Belts
Id ZchjgZ dei^bjb edlZg igVchb^hh^dc [gdb i]Z
bdidg id i]Z WaVYZ! i]Z K"WZaih bjhi WZ ^c \ddY
XdcY^i^dcVcYdeZgViZjcYZgegdeZgiZch^dc#I]Z
WZaih h]djaY WZ X]ZX`ZY [dg XgVX`h! [gVn^c\! VcY
lZVg# 7Zai iZch^dc h]djaY WZ X]ZX`ZY Vi aZVhi
ZkZgn ( bdci]h·bdgZ d[iZc ^[ i]Z WVcYhVl ^h
jhZYYV^an#
Tools Needed:
Qty
GjaZg###################################################################&
=ZmLgZcX]+bb###############################################&
LgZcX]&,bb#####################################################&
'm)h&)##############################################################'

Checking V-Belts
1.

9>H8DCC:8I76C9H6L;GDBEDL:G

2.

DeZci]Zl]ZZaXdkZgh#

Tensioning V-Belts
1.

9>H8DCC:8I76C9H6L;GDBEDL:G

2.

DeZci]Zl]ZZaXdkZgh#

3. AddhZci]ZbdidgVY_jhibZcihXgZlhh]dlc
^cFigure 72#

IZch^dc7dai
IZch^dc
Cji

Bdidg6Y_jhibZci
HXgZlh
Figure 72#BdidgbdjciWdaihVcYiZch^dcWdai
adlZgl]ZZagZbdkZY[dgXaVg^in#

3. CdiZ i]Z XdcY^i^dc d[ i]Z K"WZaih# >[ i]Z
K"WZaih VgZ XgVX`ZY! [gVnZY! dg \aVoZY! i]Zn
h]djaYWZgZeaVXZY#
4. Ejh] i]Z XZciZg d[ i]Z K"WZaih# CdiZ i]Z
Vbdjcid[YZ[aZXi^dcFigure 71#>[YZ[aZXi^dc
^hbdgZi]Vc&¿-!iZch^dci]ZK"WZai#

4. 6Y_jhii]ZK"WZaiiZch^dc/
·>[i]ZWZai^hiddaddhZ!ijgci]ZiZch^dccji
XadX`l^hZidi^\]iZci]ZWZaih#
·>[i]ZK"WZai^hiddi^\]i!ijgci]ZiZch^dccji
XdjciZgXadX`l^hZidaddhZci]ZWZaih#
Note: The V-belt tension is correct when there
is approximately 1⁄8" deflection between the
pulleys when moderate pressure is applied
with your hand.

EjaaZn

6. L]Zc i]Z K"WZai iZch^dc ^h XdggZXi! i^\]iZc
i]Z bdidg VY_jhibZci hXgZlh! VcY XadhZ i]Z
l]ZZaXdkZgh#
9Z[aZXi^dc
EjaaZn

Figure 71.K"WZaiYZ[aZXi^dc#

BdYZa<%,%&B[\#H^cXZ($&'

"*("

Replacing V-Belts
1. ;daadl Steps 1-3 ^c Checking V-Belts dc
Page 53#
2. DeZc i]Z l]ZZa XdkZgh! i]Zc gZbdkZ i]Z
WVcYhVlWaVYZgZ[ZgidBlade Changesdc
Page 41#
3. AddhZci]ZbdidgVY_jhibZcihXgZlhh]dlc
^cFigure 72 dc Page 53! i]Zcijgci]ZiZc"
h^dccjiXdjciZgXadX`l^hZ#
4.

Gdaai]ZdaYK"WZaihd[[d[i]ZbdidgejaaZn#

5. GZbdkZi]Zl]ZZaXVehXgZlVcY[aVilVh]Zg
h]dlc ^c Figure 73! i]Zc ha^YZ i]Z adlZg
l]ZZadjiVcYhZi^idcV[aVihjg[VXZ#

8. EaVXZ i]Z cZl K"WZaih dcid i]Z adlZg l]ZZa
ejaaZn#
9. Ha^YZi]Zl]ZZaVaai]ZlVnidlVgYhi]ZWVX`
d[ i]Z bVX]^cZ! i]Zc hZXjgZ ^i l^i] i]Z XVe
hXgZlVcY[aVilVh]ZggZbdkZY^cStep 5#

In the next step you must be extremely careful while rolling the belts onto the pulley.
Your fingers could be pinched between the
pulley and belts if you are not careful.
10. Gdaai]ZcZlK"WZaihdcidi]ZbdidgejaaZn#
Note: Replace both V-belts as a matched
set.
11. IZch^dci]ZK"WZaihhZZTensioning V-Belts
dc Page 53! i]Zc i^\]iZc i]Z bdidg VY_jhi"
bZcihXgZlh#

L]ZZa8VeHXgZl
VcY;aViLVh]Zg

12. GZ"^chiVaa i]Z WaVYZ! VY_jhi WaVYZ iZch^dc
gZ[ZgidPage 22VcYigVX`^c\gZ[ZgidPage
16!i]ZcXadhZi]Zl]ZZaXdkZgh#

Figure 73.L]ZZaXVehXgZl[dggZbdk^c\i]Z
l]ZZa#
6. GZbdkZi]ZdaYK"WZaih[gdbi]ZadlZgl]ZZa
ejaaZn#
7. >cheZXii]ZWgV`Zh]dZ#
·>[i]ZWgV`ZeVYi]^X`cZhhbZVhjgZh&bb
dgaZhh!i]Zc^icZZYhidWZgZeaVXZY#;daadl
i]Z^chigjXi^dch^cReplacing Brake Shoe
dcPage 59idgZeaVXZ^i#

"*)"

BdYZa<%,%&B[\#H^cXZ($&'

Adjusting Wheel and
Blade Brushes

Adjusting Tension
Lever

I]ZadlZgl]ZZaXdbeVgibZciXdciV^chi]ZWgjh]"
Zh h]dlc ^c Figure 74# I]ZhZ Wgjh]Zh VgZ
YZh^\cZY id hlZZe hVlYjhi d[[ i]Z l]ZZa i^gZ
VcYWaVYZVhi]ZWVcYhVl^hdeZgVi^c\#Idldg`
egdeZgan!i]ZWgjh]ZhbjhibV`ZXdciVXil^i]i]Z
l]ZZaVcYWaVYZ#

I]Zfj^X`gZaZVhZiZch^dcaZkZg^hhZijeXdggZXian
[dgjhZl^i]i]ZegZ"^chiVaaZY&+-WaVYZ#=dlZkZg!
^[ndj^chiVaaVY^[[ZgZciaZc\i]WaVYZ!ndjl^aacZZY
id VY_jhi i]Z iZch^dc aZkZg VY_jhibZci hXgZl hd
i]Zfj^X`gZaZVhZiZch^dcaZkZgldg`hXdggZXian#
Tools Needed:
Qty
=ZmLgZcX]+bb############################################## &
LgZcX]&(bb################################################### '
To adjust the tension lever:
1. 9>H8DCC:8I76C9H6L;GDBEDL:G
2. DeZci]Zl]ZZaXdkZgh#

7gjh]Zh

3.

AddhZc i]Z _Vb cji hZZ Figure 75! i]Zc
gZbdkZi]ZhXgZlVcYcji#

IZch^dc
6Y_jhibZci
HXgZl

Figure 74.I]Zl]ZZaWgjh]VcYWaVYZWgjh]Zh#
Tools Needed:
Qty
LgZcX]$HdX`Zi&%bb########################################'
To adjust the brushes:
1.

L]ZZa7adX`
EaViZ

?VbCji

9>H8DCC:8I76C9H6L;GDBEDL:G

2. DeZci]ZjeeZgVcYadlZgl]ZZaXdkZgh#
3. AddhZci]ZWdai$cjii]VihZXjgZhZVX]Wgjh]
^ceaVXZ#
4. 6Y_jhiZVX]Wgjh]hd^ibV`Zh\ddYXdciVXi
l^i]i]Zl]ZZadgWaVYZ·l^i]djiWZcY^c\i]Z
Wg^hiaZh#
5. I^\]iZci]ZWdai$cjihidhZXjgZZVX]Wgjh]^c
eaVXZ#

Figure 75.Fj^X`gZaZVhZiZch^dcaZkZg
VY_jhibZcihXgZl#
4. Eji i]Z fj^X` gZaZVhZ iZch^dc aZkZg ^c i]Z
Zc\V\ZY edh^i^dc Vaa i]Z lVn id i]Z g^\]i!
i]Zc ijgc i]Z WaVYZ iZch^dc ]VcYl]ZZa jci^a
i]Z WaVYZ iZch^dc bViX]Zh i]Z bVg` dc i]Z
WaVYZiZch^dchXVaZ[dgi]ZVeegdeg^ViZWaVYZ
l^Yi]#
5. I]gZVY i]Z XVe hXgZl l^i] i]Z _Vb cji
i]gdj\]i]ZeaViZl]ZgZ^ilVhViiVX]ZYegZ"
k^djhan VcY Ydlc jci^a ^i XdciVXih i]Z l]ZZa
WadX` eaViZ! i]Zc WVX` i]Z hXgZl d[[ ild [jaa
ijgchhZZFigure 75.
6. I^\]iZci]Z_Vbcji#

BdYZa<%,%&B[\#H^cXZ($&'

"**"

Adjusting Guide
Post Travel
I]Z \j^YZ edhi VhhZbWan h]djaY gZbV^c eVgVa"
aZa l^i] i]Z WaVYZ [gdci"id"WVX` VcY h^YZ"id"h^YZ
Vadc\^ihaZc\i]d[igVkZa#>[^iYdZhcdi![daadli]ZhZ
^chigjXi^dchidXdggZXianVY_jhii]Z\j^YZedhi#
Tools Needed:
BVX]^c^hihHfjVgZ############################################ &
HbVaaGjaZg######################################################## &
=ZmLgZcX]*bb############################################## &
=ZmLgZcX]+bb############################################## &
LgZcX]&%bb################################################### &
BZiVaH]^bh##################################### 6hCZZYZY

6. GZ"XdccZXii]ZbVX]^cZidedlZg!VcYadlZg
i]Z \j^YZ edhi id l^i]^c & d[ i]Z iVWaZ ide!
i^\]iZci]Z\j^YZedhiadX``cdWid]daY^i^c
eaVXZ#
7. 9^hXdccZXi i]Z bVX]^cZ [gdb edlZg! i]Zc
eaVXZVbVX]^c^hihhfjVgZdci]ZiVWaZcZmi
id i]Z g^\]i ]VcY h^YZ d[ i]Z \j^YZ edhi! Vh
h]dlc^cFigure 77#

H8DCC:8I76C9H6L;GDBEDL:G
3. I^\]iZc i]Z WaVYZ id i]Z iZch^dc i]Vi l^aa WZ
jhZYYjg^c\deZgVi^dc#

·>[i]ZgZ^hcd\VeWZilZZci]ZhfjVgZVcY
i]Z \j^YZ edhi Vadc\ ^ih [jaa aZc\i]! cd
VY_jhibZcihcZZYidWZbVYZ#EgdXZZYid
IdX]ZX`$VY_jhi^[i]Z\j^YZedhi^heVgVaaZa
l^i]i]ZWaVYZ[gdci"id"WVX`#

4. EaVXZ V bVX]^c^hi»h hfjVgZ dc i]Z iVWaZ
cZmiidi]Zh^YZd[i]ZWaVYZVh^aajhigViZY^c
Figure 76#

·>[ i]ZgZ ^h V \Ve WZilZZc i]Z hfjVgZ VcY
i]Z\j^YZedhi!i]Z\j^YZedhi^hcdieVgVaaZa
l^i]i]ZWaVYZ#[
cZXZhhVgn! gZeZVi i]^h Zci^gZ egdXZYjgZ jci^a
^i^h#

Checking/Adjusting Guide Post
Parallel with Blade Front-to-Back
2. GZbdkZi]ZWaVYZ#
3. EaVXZdcZ]VcYjcYZgi]ZjeeZgWaVYZ\j^YZ
VhhZbWan id `ZZe ^i [gdb [Vaa^c\! addhZc
i]Z ild XVe hXgZlh i]Vi hZXjgZ i]Z \j^YZ
VhhZbWanidi]Z\j^YZedhiFigure 79!i]Zc
gZbdkZi]Z\j^YZVhhZbWan#
[ i]Z bZVhjgZbZcih iV`Zc ^c Steps 7–8
VgZ ZfjVa! cd VY_jhibZcih cZZY id WZ
bVYZ#[ i]Z bZVhjgZbZcih iV`Zc ^c Steps 7–8
VgZcdiZfjVa!\didStep 9#
9. AddhZci]Z[djghXgZlhh]dlc^cFigure 78
Zcdj\]id[^ibZiVah]^bhl^YZZcdj\]id[^i
i]Z[jaal^Yi]d[i]Z\j^YZWgVX`Zi!WZilZZc
i]Z [gVbZ VcY i]Z \j^YZ edhi WgVX`Zi hZZ
Figure 81#
H]^b7

5.

GZ"^chiVaai]ZWaVYZVcYgZ"iZch^dc^i#

6. AddhZc i]Z \j^YZ edhi adX` `cdW! adlZg i]Z
\j^YZedhiidl^i]^c&d[i]ZiVWaZide!i]Zc
i^\]iZci]ZadX``cdW#
7. BZVhjgZ i]Z Y^hiVcXZ 6 WZilZZc i]Z ide
[gdci[VXZd[i]Z\j^YZedhigVX`VcYi]ZWVX`
d[i]ZWaVYZhZZFigure 80#

;gVbZ

4. GZbdkZi]ZildXVehXgZlhVcY]ZmWdaii]Vi
hZXjgZ i]Z jeeZg WaVYZ \jVgY id i]Z \j^YZ
edhi!i]ZcgZbdkZi]ZWaVYZ\jVgY#
H8DCC:8I76C9H6L;GDBEDL:G

G^\]iH^YZK^Zl

[i]Z\j^YZedhi"id"WaVYZY^hiVcXZ^h\gZVi"
Zg Vi i]Z Wdiidb i]Vc Vi i]Z ide! eaVXZ V
h]^b  WZilZZc i]Z Wdiidb d[ i]Z WgVX`Zi
VcY i]Z [gVbZ H]^b 6# I]^h l^aa i^ai i]Z
Wdiidbd[i]Z\j^YZedhiidlVgYi]ZWaVYZ#
·>[ i]Z \j^YZ edhi"id"WaVYZ Y^hiVcXZ ^h aZhh
Vii]ZWdiidbi]VcVii]Zide!eaVXZVh]^b
WZilZZc i]Z ide d[ i]Z WgVX`Zi VcY i]Z
[gVbZH]^b7#I]^hl^aai^aii]ZWdiidbd[
i]Z\j^YZedhiVlVn[gdbi]ZWaVYZ#
10. I^\]iZci]Z[djghXgZlhh]dlc^cFigure 78!
i]ZcgZeZViSteps 7¶8#
11. GZbdkZi]ZWaVYZ#
12. GZ"^chiVaa i]Z WaVYZ \jVgY l^i] i]Z ild XVe
hXgZlhVcY]ZmWdaindjgZbdkZY^cStep 4#
Tip: It may help to install the lower part of
the guard first with the cap screws, then
install the hex bolt. Also, when the guide post
assembly is raised up there is limited room to
access the hole where the hex bolt threads
in. So, try installing the hex bolt with the guide
post assembly closer to the table.

Replacing Guide
Post Motor
>[i]Z\j^YZedhibdidgZkZgcZZYhidWZgZeaVXZY!
XdciVXi djg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi
*,% *)+".++( id dgYZg i]Z gZeaVXZbZci \j^YZ
edhibdidgEVgiE%,%&)%*gZ[ZgidPage 76#
Tools Needed
Qty
E]^aa^eh=ZVYHXgZlYg^kZg################################## &
To replace the guide post motor:
1. 9>H8DCC:8I76C9H6L;GDBEDL:G
2. GZbdkZ i]Z WaVYZ \jVgY [gdb i]Z \j^YZ
edhi#
3.

GZbdkZi]ZWaVYZVcYjeeZgl]ZZa#

4.

GZbdkZi]ZE]^aa^eh]ZVYhXgZlhi]VihZXjgZ
i]Zbdidgidi]Z\ZVgWdmhZZFigure 82#
L^gZh
chiVaaVcZlWgV`Zh]dZdcidi]ZWgV`ZaZkZg
l^i]i]ZXVehXgZlh!adX`lVh]Zgh!VcYWjh]"
^c\hgZbdkZY^cStep 3#

8dciVXi djg IZX]c^XVa Hjeedgi 9ZeVgibZci Vi
*,% *)+".++( id dgYZg i]Z gZeaVXZbZci WgV`Z
h]dZ·EVgiE%+(+M%(+gZ[ZgidPage 69#

5. GZ^chiVaa i]Z K"WZaih dcid i]Z ejaaZnh! i]Zc
ha^YZ i]Z adlZg l]ZZa WVX` dcid i]Z WZVg^c\
h]V[i#

Components and Hardware Needed:
GZeaVXZbZci7gV`ZH]dZEVgiE%+(+M%(+#### &

6. IZch^dci]ZK"WZaihhZZTensioning V-Belts
dcPage 53#

Tools Needed:
=ZmLgZcX]*bb############################################## &
=ZmLgZcX]+bb############################################## &
LgZcX]&%bb################################################### &
LgZcX]&,bb#################################################### &

7. GZ^chiVaa! iZch^dc VcY igVX` i]Z WaVYZ! i]Zc
VY_jhii]ZjeeZgVcYadlZgWaVYZ\j^YZhVcY
hjeedgiWZVg^c\hVhcZZYZY#

Figure 83.7gV`Zh]dZadXVi^dc#

8. 8adhZi]Zl]ZZaXdkZgh#

To replace the brake shoe:
1. 9>H8DCC:8I76C9H6L;GDBEDL:G
2. ;daadl Steps 1-7 ^c Replacing V-Belts dc
Page 54#

BdYZa<%,%&B[\#H^cXZ($&'

"*."

Aligning Wheels

("&$'

Components and Hardware Needed:
Qty
,%Adc\'m)##################################################### &
Tools Needed:
=ZmLgZcX]Zh*!+!-bb#############################&:V
LgZcX]Zh!&%!&,bb######################################### &
IVeZBZVhjgZ#################################################### &
8deaVcVg^inH8DCC:8I76C9H6L;GDBEDL:G
3. GZbdkZi]Z[ZcXZVcYdeZcWdi]l]ZZaXdk"
Zgh#

Coplanarity
Gauge

Gauge Positions

4. 6Y_jhii]ZWaVYZ\j^YZhVlVn[gdbi]ZWaVYZ!
addhZcWaVYZiZch^dc!gZbdkZi]ZiVWaZ^chZgi
VcYe^c!i]ZcgZbdkZi]ZWaVYZ#
5.

GZbdkZi]ZiVWaZ#

6.

GZ^chiVaa i]Z WaVYZ Page 41! bV`^c\ hjgZ
i]Z \j^YZ WZVg^c\h VcY hjeedgi WZVg^c\h
VgZ VlVn [gdb i]Z WaVYZ! i]Zc i^\]iZc ndjg
WaVYZidi]ZiZch^dci]Vi^il^aaWZjhZYYjg^c\
deZgVi^dc#

7. EaVXZndjgXdeaVcVg^in\Vj\ZjeV\V^chiWdi]
l]ZZah^ci]Zedh^i^dchh]dlc^cFigure 85#
"+%"

Tracking
Knob
Wheels
Adjustment
Hub

Figure 85.8]ZX`^c\[dgXdeaVcVg^in#

BdYZa<%,%&B[\#H^cXZ($&'

·>[i]Zl]ZZahVgZXdeaVcVgFigure 86!A!
i]Z higV^\]iZY\Z l^aa ZkZcan idjX] i]Z ide
VcYWdiidbd[Wdi]l]ZZah#

·>[ i]Z higV^\]iZY\Z YdZh cdi idjX] Wdi]
l]ZZah ZkZcan! i]Z adlZg l]ZZa cZZYh id
WZ VY_jhiZY Figure 86, C dg i]Z jeeZg
l]ZZa cZZYh id WZ h]^bbZY Figure 86,
D#

B

8deaVcVg

8deaVcVg^in[i]Zl]ZZahVgZcdiXdeaVcVgFigure 86!
B! eaVXZ i]Z higV^\]iZY\Z dc i]Z adlZg
l]ZZa[^ghiZchjg^c\i]Vi^iidjX]ZhWdi]i]Z
ideVcYWdiidbg^b!i]ZcVY_jhii]ZjeeZg
l]ZZa igVX`^c\ `cdW id bV`Z i]Z jeeZg
l]ZZaXdeaVcVgl^i]i]ZadlZgl]ZZa#

A

Cdi8deaVcVg

Hdaji^dc/
6Y_jhi
IgVX`^c\
@cdW

H8DCC:8I76C9H6L;GDBEDL:G
2. BV`ZhjgZi]Zidel]ZZa^hVY_jhiZYeVgVaaZa
l^i]i]ZWdiidbl]ZZa#

C

D

CdiEVgVaaZa
Cdi8deaVcVg

3. L^i] V higV^\]iZY\Z idjX]^c\ Wdi] ed^cih d[
i]ZadlZgl]ZZa!bZVhjgZi]ZY^hiVcXZVlVn
[gdbi]ZjeeZgl]ZZa!l]^X]^hdjid[VY_jhi"
bZcihZZFigure 87#
4. GZbdkZi]ZWaVYZ[gdbi]ZhVl!i]ZcgZbdkZ
i]ZjeeZgl]ZZa#
5. 9ZiZgb^cZ]dlbVcnh]^blVh]ZghndjcZZY
idXdbeZchViZ[dgi]ZY^hiVcXZbZVhjgZY^c
Step 3VcYeaVXZi]Zbdci]Zl]ZZah]V[i#
6. GZeaVXZi]ZjeeZgl]ZZa!i]Zdg^\^cValVh]"
Zgh!i]ZhZXjg^c\hXgZl!VcYi]ZWaVYZ#

EVgVaaZa!Cdi
8deaVcVg
Hdaji^dc/
H]^bJeeZg
L]ZZaDji

H8DCC:8I76C9H6L;GDBEDL:G

3. AddhZc dcZ i^ai VY_jhibZci ]Zm Wdai! i]Zc
i^\]iZc i]Z deedh^c\ ]Zm Wdai Veegdm^bViZan
VcZfjVaVbdjci#
4. 8]ZX`i]Zl]ZZahl^i]i]ZXdeaVcVg^in\Vj\Z!
i]Zc VY_jhi i]Z adlZg l]ZZa Vi i]Z ]jW Vh
cZZYZY jci^a ^i ^h eVgVaaZa VcY XdeaVcVg l^i]
i]Zidel]ZZa#
5. I^\]iZc i]Z _Vb cjih id adX` i]Z i^ai VY_jhi"
bZci]ZmWdaih^cedh^i^dc#

2. AddhZc i]Z _Vb cjih dc i]Z adlZg l]ZZa
VY_jhibZci]jWhZZFigure 88#

6Y_jhibZci
=jW

IdeI^ai

H^YZ
I^ai

H^YZ
I^ai

7diidbI^ai
Figure 88.AdlZgl]ZZaVY_jhibZciXdcigda#

"+'"

BdYZa<%,%&B[\#H^cXZ($&'

SECTION 8: WIRING
I]ZhZeV\ZhVgZXjggZciVii]Zi^bZd[eg^ci^c\#=dlZkZg!^ci]Zhe^g^id[^begdkZbZci!lZbVnbV`ZX]Vc\"
Zhidi]ZZaZXig^XVahnhiZbhd[[jijgZbVX]^cZh#HijYni]^hhZXi^dcXVgZ[jaan#>[i]ZgZVgZY^[[ZgZcXZhWZilZZc
ndjgbVX]^cZVcYl]Vi^hh]dlc^ci]^hhZXi^dc!XVaaIZX]c^XVaHjeedgiVi*,%*)+".++([dgVhh^hiVcXZ
7:;DG:bV`^c\VcnX]Vc\Zhidi]Zl^g^c\dcndjgbVX]^cZ#

Wiring Safety Instructions
SHOCK HAZARD. Ldg`^c\dcl^g^c\i]Vi^hXdc"
cZXiZYidVedlZghdjgXZ^hZmigZbZanYVc\Zgdjh#
IdjX]^c\ ZaZXig^[^ZY eVgih l^aa gZhjai ^c eZghdcVa
^c_jgn ^cXajY^c\ Wji cdi a^b^iZY id hZkZgZ Wjgch!
ZaZXigdXji^dc! dg YZVi]# 9^hXdccZXi i]Z edlZg
[gdbi]ZbVX]^cZWZ[dgZhZgk^X^c\ZaZXig^XVaXdb"
edcZcih
MODIFICATIONS. BdY^[n^c\ i]Z l^g^c\ WZndcY
l]Vi^hh]dlc^ci]ZY^V\gVbbVnaZVYidjcegZ"
Y^XiVWaZ gZhjaih! ^cXajY^c\ hZg^djh ^c_jgn dg [^gZ#
I]^h^cXajYZhi]Z^chiVaaVi^dcd[jcVeegdkZYV[iZg"
bVg`ZieVgih#

WIRE/COMPONENT DAMAGE.9VbV\ZYl^gZh
dg XdbedcZcih ^cXgZVhZ i]Z g^h` d[ hZg^djh eZg"
hdcVa^c_jgn![^gZ!dgbVX]^cZYVbV\Z#>[ndjcdi^XZ
i]ViVcnl^gZhdgXdbedcZcihVgZYVbV\ZYl]^aZ
eZg[dgb^c\ V l^g^c\ iVh`! gZeaVXZ i]dhZ l^gZh dg
XdbedcZcih#
MOTOR WIRING. I]Z bdidg l^g^c\ h]dlc ^c
i]ZhZ Y^V\gVbh ^h XjggZci Vi i]Z i^bZ d[ eg^ci^c\
WjibVncdibViX]ndjgbVX]^cZ#>[ndj[^cYi]^h
idWZi]ZXVhZ!jhZi]Zl^g^c\Y^V\gVb^ch^YZi]Z
bdidg_jcXi^dcWdm#

WIRE CONNECTIONS. 6aa XdccZXi^dch bjhi
WZ i^\]i id egZkZci l^gZh [gdb addhZc^c\ Yjg^c\
bVX]^cZ deZgVi^dc# 9djWaZ"X]ZX` Vaa l^gZh Y^h"
XdccZXiZYdgXdccZXiZYYjg^c\Vcnl^g^c\iVh`id
ZchjgZi^\]iXdccZXi^dch#

CAPACITORS/INVERTERS. HdbZ XVeVX^idgh
VcYedlZg^ckZgiZghhidgZVcZaZXig^XVaX]Vg\Z[dg
je id &% b^cjiZh V[iZg WZ^c\ Y^hXdccZXiZY [gdb
i]Z edlZg hdjgXZ# Id gZYjXZ i]Z g^h` d[ WZ^c\
h]dX`ZY!lV^iViaZVhii]^hadc\WZ[dgZldg`^c\dc
XVeVX^idgh#

CIRCUIT REQUIREMENTS. Ndj BJHI [daadl
i]Z gZfj^gZbZcih Vi i]Z WZ\^cc^c\ d[ i]^h bVc"
jVa l]Zc XdccZXi^c\ ndjg bVX]^cZ id V edlZg
hdjgXZ#

EXPERIENCING DIFFICULTIES. >[ndjVgZZmeZ"
g^ZcX^c\Y^[[^Xjai^ZhjcYZghiVcY^c\i]Z^c[dgbVi^dc
^cXajYZY ^c i]^h hZXi^dc! XdciVXi djg IZX]c^XVa
HjeedgiVi*,%*)+".++(#

The photos and diagrams
included in this section are
best viewed in color. You
can view these pages in
color at www.grizzly.com.

BdYZa<%,%&B[\#H^cXZ($&'

"+("

Electrical Overview

Wiring Diagram
Page Reference

Description

A

B

C

A

EdlZg?jcXi^dc7dm

+*

B

BV\cZi^XHl^iX]

+*

C

Bdidg?jcXi^dc7dm

+*

D

8dcigdaEVcZa

++

E

C:

2. L]^X]d[i]Z[daadl^c\bV\Vo^cZhYdndjhjWhXg^WZid4
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT

8VW^cZibV`Zg;9B
;Vb^an=VcYnbVc
=VcYAdVYZg
=VcYn
=dbZH]deBVX]^c^hi
?djgcVad[A^\]i8dci#
A^kZHiZVb
BdYZa6^geaVcZCZlh
DaY=djhZ?djgcVa
EdejaVgBZX]Vc^Xh

TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT

EdejaVgHX^ZcXZ
EdejaVgLddYldg`^c\
EgZX^h^dcH]ddiZg
Egd_ZXih^cBZiVa
G8BdYZaZg
G^ÄZ
H]deCdiZh
H]di\jcCZlh
IdYVn»h=dbZdlcZg
LddY

TTTT
TTTT
TTTT
TTTT
TTTT
TTTT
TTTT

LddYZc7dVi
LddYh]deCZlh
LddYhb^i]
LddYldg`
LddYldg`ZgLZhi
LddYldg`Zg»h?djgcVa
Di]Zg/

3. L]Vi^hndjgVccjVa]djhZ]daY^cXdbZ4

TTTT '%!%%%"'.!%%%
 TTTT (%!%%%"(.!%%%

TTTT *%!%%%"*.!%%%
 TTTT +%!%%%"+.!%%%

TTTT )%!%%%").!%%%
TTTT ,%!%%%

4. L]Vi^hndjgV\Z\gdje4

TTTT '%"'.

TTTT *%"*.

TTTT )%").
TTTT ,%

 TTTT (%"(.
 TTTT +%"+.

5. =dladc\]VkZndjWZZcVlddYldg`Zg$bZiValdg`Zg4

TTTT %"'NZVgh
TTTT '"-NZVgh
TTTT -"'%NZVgh

 TTTT '% NZVgh

6. =dlbVcnd[ndjgbVX]^cZhdgiddahVgZcYjhig^VaidV[g^ZcY4

TTTTT NZh

TTTTTCd

9. LdjaYndjVaadljhidjhZndjgcVbZVhVgZ[ZgZcXZ[dgC:

EaVXZ
HiVbe
=ZgZ

'2)::,9 ).$5342)!, ).#
0/ "/8 
"%,,).'(!- 7!  

;DA96ADC<9DII:9A>C:

HZcYVcYjhig^Va!>cX#lVggVcihZkZgnegdYjXi^ihZaah[dgVeZg^dYd[ YEARidi]Zdg^\^cVaejgX]VhZg[gdb
i]ZYViZd[ejgX]VhZ#I]^hlVggVcinYdZhcdiVeeanidYZ[ZXihYjZY^gZXiandg^cY^gZXianidb^hjhZ!VWjhZ!
cZ\a^\ZcXZ!VXX^YZcih!gZeV^ghdgVaiZgVi^dchdgaVX`d[bV^ciZcVcXZ#I]^h^hccdZkZcih]Vaa
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23
Create Date                     : 2012:08:29 14:12:08-07:00
Metadata Date                   : 2012:08:29 14:11:29-07:00
Modify Date                     : 2012:08:29 14:12:08-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10881 bytes, use -b option to extract)
Instance ID                     : uuid:ad6e4c6a-0a6c-3a47-929e-b1c23a9df1ed
Document ID                     : adobe:docid:indd:65e6242f-75a1-11e1-bcdd-95f77375ac1c
Rendition Class                 : proof:pdf
Derived From Instance ID        : a6361bce-710e-11e1-9169-8b3d90514544
Derived From Document ID        : adobe:docid:indd:d1f226a7-69b9-11e1-a442-a2c97293d1a5
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 304.80, 300.00, 308.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 776.41, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 304.80, 300.00, 72.00, 72.00, 304.80, 300.00, 304.80, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 584.17, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 439.88, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 304.80, 300.00, 308.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 776.41, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 304.80, 300.00, 72.00, 72.00, 304.80, 300.00, 304.80, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 584.17, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 439.88, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:696A3AE62192DE11B5A2BBCF67B4C35D, uuid:07b1d861-3b2a-3644-84d1-d255c031efe2, uuid:32b3d3f6-7309-11da-980b-000393c83c9a, uuid:2d5096e4-9fd5-5849-879a-8c3ac9fea2b6, uuid:fddf31e9-5866-1443-8ee5-ea09ab1c1e9c, uuid:696A3AE62192DE11B5A2BBCF67B4C35D, uuid:846F57EC4D95DE11AFB18F3870C060FE, uuid:dfdaf898-f9a4-ed4a-b5c4-a41bb0d34ac3, uuid:3b262a21-eaec-7940-a80f-4703a4954615, uuid:aebea0ec-b5b9-914a-a42f-2318dc00a645, uuid:786b9b88-63d0-6e4d-b19a-c68d59546150, uuid:9ce0f5fc-78b5-f94f-97f0-f93d434c7d54, uuid:188ec215-2054-2444-884e-d7c9c7d6b13f, uuid:6bae85f2-79cc-1e49-b4e1-11cec0529154, uuid:1bc7beb6-5703-bb42-82e1-a7f0b5ce4905, uuid:1b1a3555-4be9-a14d-a2a5-bdef8687534e, uuid:33efb7cb-fd85-6a4c-a7de-bcccac16fff7, uuid:329ae762-c758-b143-bc85-ac3dfaf72e2e, uuid:4e2eb8cf-69d5-ce49-8a05-1fd0fd2363fa, uuid:89059f39-8907-c647-ac8b-7aaa9a4dd13b, uuid:c2847249-58d8-bc4d-8cf4-33a864ff1883, uuid:a891b71c-235d-6c4c-aa56-d2c6f1bda981, uuid:3729fb7e-2a53-da48-8e9a-ae8c699ddcec, uuid:36af69f0-0eff-304d-9d7d-6745d92bf8b9, uuid:c2847249-58d8-bc4d-8cf4-33a864ff1883, uuid:486CE9CE79C0DE119656B444A6024A6E, uuid:d172ccae-7fd4-e14b-b430-50adbbda9fff, uuid:c1bba77d-60c8-bc4d-bc3c-615da38ac06d, uuid:ff0a118b-10cd-304a-8556-8460d5b5cb51, uuid:36df253f-15b5-5a45-9c4d-857d5cb0828b, uuid:85158C153C92DE11B5A2BBCF67B4C35D, uuid:32d395d3-09eb-11dc-9d51-bd521a228af2, uuid:bcc074d8-1df1-11d9-b2ad-e4088db10571, uuid:6f199f66-b702-11d9-b8fa-a84eb4cf4ff7, uuid:6DEF9256219ADE1185C9AFD0AB35F6C5, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:5f957bf6-15ad-11da-9bcd-000393c83c9a, uuid:696A3AE62192DE11B5A2BBCF67B4C35D, uuid:92D04B4942B5E1118A35F1D50F267385, uuid:846F57EC4D95DE11AFB18F3870C060FE, uuid:8B5E7C165C92DE11B5A2BBCF67B4C35D, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:AD4628BE4392DE11B5A2BBCF67B4C35D, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:6db05134-1770-0844-964d-2d78c87cdc33, uuid:5B512BD26FA0DE119312AE82A4790456, uuid:9C9C96A0EE93DE118054C1F55A7510AE, uuid:C661918B4392DE11B5A2BBCF67B4C35D, uuid:0CB754924392DE11B5A2BBCF67B4C35D, uuid:bb0c8fbd-7069-8b41-98d8-02a0c2bdd2e2, uuid:420DEAD65E92DE11B5A2BBCF67B4C35D, uuid:94622e4b-baf1-4c43-ad21-bf69da4f3c2d, uuid:E47133926192DE11B5A2BBCF67B4C35D, uuid:696A3AE62192DE11B5A2BBCF67B4C35D, uuid:5DC4F6F1B694DE118D7BDC8764C85EFC, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:B0F18BCCB894DE118D7BDC8764C85EFC, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:FD5A370D6CA3DE11828DA5DF9EF4F583, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:66AC847D78A3DE11828DA5DF9EF4F583, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:0CB754924392DE11B5A2BBCF67B4C35D, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:4F9CD9604392DE11B5A2BBCF67B4C35D, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:7C6F57EC4D95DE11AFB18F3870C060FE, uuid:E6B09DFA4392DE11B5A2BBCF67B4C35D, uuid:CD6B61034492DE11B5A2BBCF67B4C35D, uuid:0cd067fd-608d-11db-b96b-000393c83c9a, uuid:160a4a4e-5c2f-e049-9188-57908ad2d085, uuid:6E361850B494DE118D7BDC8764C85EFC, uuid:3510844C9294DE118D7BDC8764C85EFC, uuid:846F57EC4D95DE11AFB18F3870C060FE, uuid:CC54089D4392DE11B5A2BBCF67B4C35D, uuid:E6B09DFA4392DE11B5A2BBCF67B4C35D, uuid:CD6B61034492DE11B5A2BBCF67B4C35D, uuid:3510844C9294DE118D7BDC8764C85EFC, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:696A3AE62192DE11B5A2BBCF67B4C35D, uuid:696A3AE62192DE11B5A2BBCF67B4C35D, uuid:846F57EC4D95DE11AFB18F3870C060FE, uuid:d77447a0-62d6-11dc-955c-000393c83c9a, uuid:85c31822-62da-11dc-91f4-000393c83c9a, uuid:952e0998-fa56-11db-a42f-0003937c0de8, uuid:846F57EC4D95DE11AFB18F3870C060FE, uuid:4e94e2b3-ffc6-11db-8e28-e284f32cb766, uuid:4597E526A194DE118119B7F83BE887C6, uuid:2FA3057C376A11E091E1DE1B95A33E8B, uuid:9FDD6088376811E091E1DE1B95A33E8B, uuid:2a1c7f2b-89bf-11da-bd9b-f9e34eafe683, uuid:19CE87B140B5E111A677D1ED58740205, uuid:8a2484e7-07b8-11dc-8ab7-0003937c0de8, uuid:76b4fedf-62ec-11dc-91f4-000393c83c9a, uuid:5a2fb352-fa5a-11db-a42f-0003937c0de8, uuid:6747DC37911BDE11A653844E8CE112F1, uuid:2783061a-f40f-11db-9e8a-0003937c0de8, uuid:a499115b-7df6-11da-baf6-d614cb5fdf1f, uuid:151C03536C26DE11A0D3F8699747A1BD, uuid:834f845a-60e2-11db-b0b9-c2b54a4dbf5d, uuid:2A155EEF3049DF11BBA39705014B5244, uuid:3bf15746-8a07-11d8-868f-992b9e5e26a0, uuid:b9740c64-8a13-11d8-868f-992b9e5e26a0, uuid:A3B384C1662ADE119E1DE77ED8E6CD2B, uuid:C0FA1563632ADE119E1DE77ED8E6CD2B, uuid:db20fc51-9474-11d8-a854-b4049765840c, uuid:b8af00ba-9cbb-11da-ba58-000393c83c9a, uuid:677c4eea-ffc7-11db-8e28-e284f32cb766, uuid:5071A58A4895DE118A3DBDAC3E1EB207, uuid:1B107BCFC6ADDE11ABA4AFAC85F07F74, uuid:56F10A78A294DE118119B7F83BE887C6, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:a752778c-8ef6-934d-9890-7c90f14064ab, uuid:c479abc6-e3bd-11d8-8e6e-e81c87145b44, uuid:aa44314a-ffde-11db-8e28-e284f32cb766, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:5071A58A4895DE118A3DBDAC3E1EB207, uuid:BC9F0E09B097DE1180A0B74AEB89E347, uuid:aa44314a-ffde-11db-8e28-e284f32cb766, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:6db05134-1770-0844-964d-2d78c87cdc33, uuid:a07a569c-ffdc-11db-8e28-e284f32cb766, uuid:615f4d54-5dd9-5546-b87e-2052813198dc, uuid:8d463e04-4248-5f46-9751-6f1689b66d0b, uuid:ef74f844-1e0d-a348-be6f-1a910bcb222c, uuid:E6B09DFA4392DE11B5A2BBCF67B4C35D, uuid:7C148E2455A4DE1185BCB6C3A87A5393, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:CCD1D5354392DE11B5A2BBCF67B4C35D, uuid:8503ba17-edfa-6a43-bb29-c5abba46abdf, uuid:c167701a-a5c4-b043-b016-4ee190722481, uuid:BA86EF486D1CDE118503938A85943030, uuid:f64f6912-9a5d-11da-8d8c-0003937c0de8, uuid:9D918CDA4895DE118A3DBDAC3E1EB207, uuid:099a8c11-ea8d-6147-92b1-fbabfe1be38a, uuid:a36e590e-e6c1-994c-ae2a-16b5a588e016, uuid:04865769-066b-f246-9494-1a7cf375602c, uuid:6e4c1b5b-8a5b-aa42-8e5d-58e0c8ea59dd, uuid:71f876b0-013e-324c-8ab2-fc94a44ad0f2, uuid:04865769-066b-f246-9494-1a7cf375602c, uuid:6e4c1b5b-8a5b-aa42-8e5d-58e0c8ea59dd, uuid:b5044260-8792-714c-bdea-c1da883f5228, uuid:13CC31DDCD69E111A53AFA098CE35CF5, uuid:32027A659200E1119B3CD7182457E73B, uuid:382e37aa-ffcb-11db-8e28-e284f32cb766, uuid:04865769-066b-f246-9494-1a7cf375602c, uuid:6e4c1b5b-8a5b-aa42-8e5d-58e0c8ea59dd, uuid:163a11bb-88ab-704e-a14f-9762983a74c8, uuid:D4291C51D469E111A53AFA098CE35CF5, uuid:6409630A55A4DE1185BCB6C3A87A5393, uuid:04865769-066b-f246-9494-1a7cf375602c, uuid:6e4c1b5b-8a5b-aa42-8e5d-58e0c8ea59dd, uuid:efa15298-907c-fc41-a04c-43689904a345, uuid:3591331A55A4DE1185BCB6C3A87A5393, uuid:7C148E2455A4DE1185BCB6C3A87A5393, uuid:EDE4563055A4DE1185BCB6C3A87A5393, uuid:1ca10ef6-cc67-0c44-9edb-07b52e7af39e, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:26763973-3c17-ad49-bd1b-9ab007dd9ddd, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:f98f5431-838a-5849-8915-9b2ca4c2eb55, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:666b737a-37ee-f941-9d1f-70532f54e805, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:492af36c-6385-9648-a309-e6f5f63ffd20, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:83914af2-7903-1e4d-8940-ead04f2834b2, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:4adbf1d6-0f67-6a49-b99c-50f4a04b4dd7, uuid:1c45c77d-cfb4-f74d-a9d1-3b4ed7c7d47e, uuid:B0ECB14F1188DE11BE01C120466F1DD2, uuid:e5f0e32c-75dc-b04d-92da-ab302fb645a8, uuid:47f441d8-2930-11da-9e16-000393ba6a32, uuid:644338fe-863d-11dc-9ccd-000393c83c9a, uuid:a2431270-2345-9948-9b85-747e66d0c892
Manifest Reference Document ID  : uuid:F12615530088DE11BE01C120466F1DD2, uuid:8137bfdc-72fc-11da-9e8e-000393c83c9a, uuid:54f65e34-72fe-11da-9e8e-000393c83c9a, adobe:docid:indd:24290c2f-51be-11de-8e70-fbf31defff81, adobe:docid:indd:bb04e556-51c8-11de-8e70-fbf31defff81, uuid:F12615530088DE11BE01C120466F1DD2, uuid:171999EC2092DE11B5A2BBCF67B4C35D, adobe:docid:indd:746f9e01-d4f7-11de-a621-d39a6d06ad4b, adobe:docid:indd:7150b613-a06c-11df-9ab5-c282914590d4, adobe:docid:indd:3ea40d77-5831-11df-84ed-a9b20659469d, adobe:docid:indd:5ee1d111-5840-11df-84ed-a9b20659469d, adobe:docid:indd:5ee1d115-5840-11df-84ed-a9b20659469d, adobe:docid:indd:5ee1d119-5840-11df-84ed-a9b20659469d, adobe:docid:indd:dca9a6f2-ea7e-11e0-a90a-bd877ffde5ed, adobe:docid:indd:0aec726d-5844-11df-84ed-a9b20659469d, adobe:docid:indd:cf66f626-5848-11df-84ed-a9b20659469d, adobe:docid:indd:0aec7268-5844-11df-84ed-a9b20659469d, adobe:docid:indd:470bf254-584a-11df-84ed-a9b20659469d, adobe:docid:indd:2b637c1e-591c-11df-98e3-d79695d64e5a, adobe:docid:indd:470bf257-584a-11df-84ed-a9b20659469d, adobe:docid:indd:bd9079db-584b-11df-84ed-a9b20659469d, adobe:docid:indd:4ed3d08b-198e-11e0-bd78-ad0ffb7f7553, adobe:docid:indd:fd84af2e-9e32-11e0-a0d7-dfcc3dbfce2e, uuid:9D54528B2D5FDF11A55DC440AC904E88, adobe:docid:indd:bd9079db-584b-11df-84ed-a9b20659469d, adobe:docid:photoshop:05347146-ffb3-11db-bc2b-c6bfc505fed5, adobe:docid:indd:8e15d653-088e-11e1-ac2c-e29cc1df1d5a, uuid:9D78980C3392DE11976BC8CACF331F6A, adobe:docid:indd:5dfdf781-3bad-11de-8c6b-9f2475c0a3be, uuid:A078980C3392DE11976BC8CACF331F6A, uuid:7D158C153C92DE11B5A2BBCF67B4C35D, adobe:docid:photoshop:ff4f4c12-2e53-11d9-a83d-ce018605291f, adobe:docid:photoshop:fa9ed483-1dee-11d9-ba77-f4418af9b857, adobe:docid:photoshop:56e647dc-f002-11d7-9113-bfb387b6a0b1, uuid:98B4CC25219ADE1185C9AFD0AB35F6C5, uuid:F12615530088DE11BE01C120466F1DD2, uuid:171999EC2092DE11B5A2BBCF67B4C35D, uuid:040E63524692DE11B5A2BBCF67B4C35D, adobe:docid:photoshop:a456572d-8e28-11de-baf2-b19da202cc5a, uuid:13FDF1964420DE11A156F0966B762A14, adobe:docid:photoshop:b50c451d-8e46-11de-baf2-b19da202cc5a, uuid:C451ECB1D793DE118054C1F55A7510AE, adobe:docid:photoshop:6710d087-8d9a-11de-938d-b002504c2b7f, adobe:docid:photoshop:a4565728-8e28-11de-baf2-b19da202cc5a, uuid:9C303FDA5FF3DD11BD11AB5B77779C10, uuid:3A0DEAD65E92DE11B5A2BBCF67B4C35D, uuid:D387B4C98598DE11AD67D8AC3F3F81F8, uuid:DB8B45E85E92DE11B5A2BBCF67B4C35D, uuid:F12615530088DE11BE01C120466F1DD2, uuid:55C4F6F1B694DE118D7BDC8764C85EFC, uuid:929BBD02B794DE118D7BDC8764C85EFC, uuid:B8F18BCCB894DE118D7BDC8764C85EFC, uuid:3064966C3E95DE11AFB18F3870C060FE, adobe:docid:photoshop:a4565728-8e28-11de-baf2-b19da202cc5a, adobe:docid:photoshop:4424a2d6-8da0-11de-bccd-bd85f3b9fc5a, uuid:036839114D95DE11AFB18F3870C060FE, adobe:docid:photoshop:7487320f-8e38-11de-baf2-b19da202cc5a, adobe:docid:photoshop:7487320a-8e38-11de-baf2-b19da202cc5a, uuid:9c201cd6-608b-11db-b96b-000393c83c9a, uuid:A46F8EECA194DE11B9CAABF23363DD55, uuid:4133A8F2AA94DE118D7BDC8764C85EFC, uuid:CC43E3358094DE118D7BDC8764C85EFC, uuid:171999EC2092DE11B5A2BBCF67B4C35D, adobe:docid:photoshop:4dfb6bd0-8e43-11de-bde9-a9905beaa539, adobe:docid:photoshop:7487320f-8e38-11de-baf2-b19da202cc5a, adobe:docid:photoshop:7487320a-8e38-11de-baf2-b19da202cc5a, uuid:CC43E3358094DE118D7BDC8764C85EFC, uuid:F12615530088DE11BE01C120466F1DD2, uuid:F12615530088DE11BE01C120466F1DD2, uuid:171999EC2092DE11B5A2BBCF67B4C35D, uuid:f49249ac-6c10-11da-8587-0003936f444e, uuid:952df850-fa56-11db-a42f-0003937c0de8, uuid:171999EC2092DE11B5A2BBCF67B4C35D, adobe:docid:photoshop:270c3628-ff07-11db-b02b-a471a335ffe8, uuid:3C97E526A194DE118119B7F83BE887C6, uuid:622CE4DD1BDA11E090B398CBCC8E48AD, uuid:4885452E1BDC11E090B398CBCC8E48AD, adobe:docid:photoshop:bdea326f-7df6-11da-baf6-d614cb5fdf1f, uuid:18CE87B140B5E111A677D1ED58740205, uuid:7f09f1b5-07b8-11dc-b18a-0003937c0de8, uuid:6ce81e76-62ec-11dc-91f4-000393c83c9a, uuid:5a2fa21e-fa5a-11db-a42f-0003937c0de8, uuid:6647DC37911BDE11A653844E8CE112F1, uuid:2782f67e-f40f-11db-9e8a-0003937c0de8, adobe:docid:photoshop:a3422bc6-7df6-11da-baf6-d614cb5fdf1f, uuid:141C03536C26DE11A0D3F8699747A1BD, adobe:docid:photoshop:834f8459-60e2-11db-b0b9-c2b54a4dbf5d, uuid:84E05698C497DE1180A0B74AEB89E347, adobe:docid:photoshop:3bf15745-8a07-11d8-868f-992b9e5e26a0, adobe:docid:photoshop:b9740c63-8a13-11d8-868f-992b9e5e26a0, adobe:docid:photoshop:373f1741-9473-11d8-a854-b4049765840c, uuid:BA3EF8F5542ADE119E1DE77ED8E6CD2B, adobe:docid:photoshop:64063ff4-9474-11d8-a854-b4049765840c, uuid:b8aef3b4-9cbb-11da-ba58-000393c83c9a, adobe:docid:photoshop:15ddc488-ff9b-11db-bc2b-c6bfc505fed5, uuid:3A81A7223295DE118A3DBDAC3E1EB207, uuid:1A107BCFC6ADDE11ABA4AFAC85F07F74, uuid:55F10A78A294DE118119B7F83BE887C6, uuid:22398CC27BD2DD11BFE0D31C4B9E2FDD, adobe:docid:photoshop:c479abc5-e3bd-11d8-8e6e-e81c87145b44, adobe:docid:photoshop:75ea9a6c-fee9-11db-b02b-a471a335ffe8, uuid:3A81A7223295DE118A3DBDAC3E1EB207, uuid:37EFAD7CAF97DE1180A0B74AEB89E347, adobe:docid:photoshop:75ea9a6c-fee9-11db-b02b-a471a335ffe8, uuid:13FDF1964420DE11A156F0966B762A14, adobe:docid:photoshop:11818fb7-ff06-11db-b02b-a471a335ffe8, uuid:0457C34CEA20DE11BBF989CAC688F93B, uuid:4BE8DDBE0C21DE11BBF989CAC688F93B, uuid:753CEBB90F21DE11BBF989CAC688F93B, adobe:docid:photoshop:7487320f-8e38-11de-baf2-b19da202cc5a, adobe:docid:photoshop:8ced7cc3-8f10-11de-aa38-db4f3269770f, adobe:docid:photoshop:b4f38501-8e65-11de-baf2-b19da202cc5a, uuid:096FC6899897DE11981FE602D1A306DB, uuid:A0D1F3736F1CDE11BA48A353416B465A, uuid:B986EF486D1CDE118503938A85943030, adobe:docid:photoshop:b50c4522-8e46-11de-baf2-b19da202cc5a, adobe:docid:indd:4bb3d922-3bd1-11de-8c6b-9f2475c0a3be, uuid:CDC041E8A19BDD11902FD94E67DA44A3, uuid:8227B194A134DD1183ADE6BE57079252, uuid:8427B194A134DD1183ADE6BE57079252, uuid:063F9B2E4295DE1193DEDF220E37AC27, uuid:8227B194A134DD1183ADE6BE57079252, uuid:8427B194A134DD1183ADE6BE57079252, uuid:00C096E66795DE1193DEDF220E37AC27, uuid:E3B1925ACD69E111A53AFA098CE35CF5, uuid:31027A659200E1119B3CD7182457E73B, adobe:docid:photoshop:fe00d238-fe3d-11db-b02b-a471a335ffe8, uuid:8227B194A134DD1183ADE6BE57079252, uuid:8427B194A134DD1183ADE6BE57079252, uuid:E282EC317C95DE1193DEDF220E37AC27, uuid:C39C086BD069E111A53AFA098CE35CF5, adobe:docid:photoshop:3e7ffdd3-8f31-11de-9142-be2b47d6274e, uuid:8227B194A134DD1183ADE6BE57079252, uuid:8427B194A134DD1183ADE6BE57079252, uuid:03C62F3E6998DE11AD67D8AC3F3F81F8, adobe:docid:photoshop:0a26f69d-8f1e-11de-9142-be2b47d6274e, adobe:docid:photoshop:8ced7cc3-8f10-11de-aa38-db4f3269770f, adobe:docid:photoshop:2ca6a1d9-8f2f-11de-9142-be2b47d6274e, uuid:957D4CDE1984DE11A89CAF6E4F8DB7DF, uuid:253cfa8f-3872-824e-96af-6247b902399f, uuid:253cfa8f-3872-824e-96af-6247b902399f, uuid:957D4CDE1984DE11A89CAF6E4F8DB7DF, uuid:253cfa8f-3872-824e-96af-6247b902399f, uuid:33DBEC8E2484DE11A89CAF6E4F8DB7DF, uuid:253cfa8f-3872-824e-96af-6247b902399f, uuid:33DBEC8E2484DE11A89CAF6E4F8DB7DF, uuid:253cfa8f-3872-824e-96af-6247b902399f, uuid:801BDEF5FFC5DE118E7382F8D36CA502, uuid:253cfa8f-3872-824e-96af-6247b902399f, uuid:2FDBEC8E2484DE11A89CAF6E4F8DB7DF, uuid:253cfa8f-3872-824e-96af-6247b902399f, uuid:4FB540760488DE11AE2AFF0CD12C469E, uuid:253cfa8f-3872-824e-96af-6247b902399f, adobe:docid:indd:77e557cd-5e44-11de-a3eb-c7d26c429f48, adobe:docid:indd:7a1d4e3b-2a85-11da-9d53-e6edeb4407c1, adobe:docid:indd:7a1d4e35-2a85-11da-9d53-e6edeb4407c1, adobe:docid:indd:7a1d4e3b-2a85-11da-9d53-e6edeb4407c1, uuid:072985D9ADF7DF11BB08BC5CA6D6DD83
Format                          : application/pdf
Title                           : g0701_m.pdf
Creator                         : 
Producer                        : Acrobat Distiller 8.1.0 (Macintosh)
Trapped                         : False
Page Count                      : 84
Author                          : 

EXIF Metadata provided by EXIF.tools