GROUND SP-010 Bluetooth Retro Karaoke Microphone User Manual

Shenzhen Ground Enterprises Co., Ltd Bluetooth Retro Karaoke Microphone

user manual

USER MANUALMOBILE RECORDINGWith the USB charging cable connect the USB charger into a charging port - The red light under the power button will go on, showing it is in charging mode.The normal charging time is 2 hours. After a full charge the red light will automatically turn off.When the battery voltage is too low, the product will automatically turn off.SPECSBluetooth: V4.2Output Power: 10mW (headset output)      3W*2 (speaker output) Frequency Range: 20Hz-18000HZ Reverberation Mode: Echo Sound Effect Reverberation Power Supply Mode: Built-in Polymer Lithium Battery Battery Capacity: 2000mAh Charging Power: DC5VPlaying Time: Up to 3 hours Open the Recording Application: Download a Karaoke recording enabled APP onto your device, choose themusic you like then aim your device at the mic locatedat the top of the speaker to record your song on the app.Save your songs according to the instructions that are on the app downloaded.Product OverviewMicrophoneSpeakerPower SwitchMic VolumeUSB Charging Port LED Charging IndicatorLightUSBPORTSpeaker Volume Up/Next Song Speaker Volume Down/Previous SongEcho Strength AdjustmentMulti Function (MF) ButtonPause/Play/Answer Calls/Hang Up CallsThe power lightdoesn’t work.The battery is too low or the charging line is disconnected. Charge the mic.Examine the connector or charging cableThe microphone has no voice. The power is not turned on or the mic volume  is not adjusted. Turn on the power or adjust themic volume.The microphone has no echo reverberation.  The reverberation switchis not adjusted well.  Adjust the reverberation switch to the proper position. Singing or recording is accompanied with noise. Environment noise or Mobile device signal interference.The mobile device doesn’t match. The mobile device sound treatment chip has weak performance. Use in a quiet place. Increase the distance betweenthe mic and device.Restart the mobile device or change the device completely. Some models of mobile devices have bad recording results. The Bluetooth distance is too far. There isobstacle between the mobile device and microphone. Put it near the mobile device. Keep away from the obstacle.When the Bluetooth is played, there isaccompanying sound or static. The mobile device volume is too low or the source music file has low volume.Adjust the mobile device media volume. Download music with high volume.The Bluetooth has low or no accompanying sound. The Bluetooth distance is too far. There is an obstacle. It is connected to another mobile device.The volume is too high. The battery is too low.Adjust the mobile media volume low. Charge the battery. Put it near the mobile device. Keep away from the obstacle. Disconnect the connected mobile device.The Bluetooth couldn’t be connected.Distortion occurs when the Bluetoothis playing music.TROUBLESHOOTINGwww.AduroProducts.comFor any questions regarding this product please contact CS@aduroproducts.comIssue  Reason  Troubleshooting Issue  Reason  Troubleshooting WIRELESSKARAOKE MIC & SPEAKERUNote: After connecting your device once, the Bluetooth will have memory function. After starting up, it will connectautomatically to your device.For disconnecting you can Forget The Device using the Bluetooth settings on your mobile device. Once the Karaoke Mic is connected you can now stream audio from your mobile device.Use The Speaker Volume Controls to adjust the soundof the audio from your mobile device, as well as go to next or previous songs. You can also adjust the audio from the device itself.Use the MF Button to Play/Pause your musicNote:If you are only intending to listen to music, usingthe speaker and not the microphone adjust the microphone volume to the minimum. Once connected to your mobile device you can now control and make your calls through the Karaoke Mic.Use the MF Button to answer and hang up your call.To use the mic for singing make sure that the MIC Volume is raised to the desired level. You can thenadjust the Echo strength of the mic using the EchoStrength adjustment control.You can now sing alone or sing along to the audio streaming from the speaker.CHARGINGPAIRINGUSING THE MICUSING THE SPEAKERANSWERING CALLSTurn on the power switch and the blue light will go on. When the bottom indicator light flashes blue the speaker is in pairing mode.Open your Bluetooth settings on your mobile device and scan. After finding "ADURO US20",select it. The Karaoke Mic will now connect with your device. After connecting you will hear a prompt telling you that the Bluetooth is connected.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:   - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help  Changes or modifications not expressly approved by the party responsible for compliance  could void the user's authority to operate the equipment.   This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions:  (1) this device may not cause harmful interference, and  (2) this device must accept any interference received,  including interference that may cause undesired operation.

Navigation menu