Group Sense Mobile Tech B217 WiFi PDA User Manual
Group Sense Mobile-Tech Limited WiFi PDA Users Manual
Contents
- 1. user manual
- 2. User Manual
- 3. Users Manual
Users Manual
WiFi PDA DT4100 Quick Start Guide Copyright ................................................................................................. 2 Disclaimer................................................................................................ 2 Regulatory Information........................................................................... 2 Contents Contents Safety Information................................................................................... 4 Getting Started......................................................................................... 5 Device Overview................................................................................. 5 Installing and Removing the Battery.................................................... 7 Battery Charging................................................................................. 8 LED Status Description..................................................................... 10 Powering the Device On and Off....................................................... 11 Suspending the Device..................................................................... 11 Using the Device................................................................................... 12 Viewing System Information.............................................................. 12 Using Wi-Fi........................................................................................ 12 Using Bluetooth................................................................................. 12 Using NFC......................................................................................... 13 Adjusting Date & Time....................................................................... 13 Adjusting Volume............................................................................... 13 Adjusting Display Settings................................................................. 13 Defining Keys.................................................................................... 14 Changing Battery Charging Policy.................................................... 14 Changing Language.......................................................................... 15 Performing System Backup............................................................... 15 Performing System Restore.............................................................. 15 Resetting the Device......................................................................... 16 Copyright Copyright Copyright© 2015 Group Sense Mobile-Tech Limited. All rights reserved. No part of this document may be reproduced, distributed, translated, or stored in any form without the prior written permission of Group Sense Mobile-Tech Limited. All brands and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Product specifications are subject to change without prior notice. Disclaimer The contents of this document are provided as is. Group Sense MobileTech Limited makes no representations or warranties with respect to the contents herein and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Group Sense Mobile-Tech Limited reserves the right to revise this document at any time without prior notice. Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This device should be installed and operated with a minimum separation distance of 20cm between the radiator and all persons. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. CE Statement This device has been tested and found to comply with the following EU Directives: R&TTE Directive (1999/5/EC) • EMC Directive (2004/108/EC) • Low Voltage Directive (2006/95/EC) The assessment of compliance of the device was performed according to the following European standards: • EMC: EN 301 489-1 V1.9.2, EN 301 489-3 V1.4.1, EN 301 489-17 V2.2.1 • Health: EN 62311:2008, EN 62209-2:2008, EN 62479:2010 • Safety: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 • Radio: EN 300 328 V1.7.1, EN 300 330-1 V1.7.1, EN 300 330-2 V1.5.1, EN 50360:2001 Regulatory Information • Use Restrictions: This device is restricted to indoor use when operating in the 5150 to 5250 MHz frequency range. Radiation Exposure Statement This devise is designed, tested, and manufactured to comply with the limits for exposure to RF energy set by international regulatory agencies. “Specific Absorption Rate,” or SAR, refers to the rate at which the body absorbs RF energy. The SAR limits for Wi-Fi and Bluetooth are 1.6 watts per kilogram (W/kg) for the FCC, and 2.0 W/kg for the Council of the European Union. This device has been tested, and meets the FCC and European Union RF exposure guidelines for Wi-Fi and Bluetooth operation. Safety Information Safety Information Please read the following information carefully before using the device for the first time, and keep this Quick Start Guide in a safe place for future reference. ■■ Always treat the device with care and keep it in a clean and dustfree environment. ■■ Do not expose the device to extremely hot, cold or humid environment. The operation temperature is from –10°C to 50°C. ■■ Do not use the device in wet or rainy conditions. ■■ Do not charge the device in extremely hot (over 38°C) or cold conditions (below 0°C). ■■ Do not attempt to disassemble or modify the device including the charger. ■■ Do not operate the device when your hands are wet. ■■ Do not insert foreign objects into the openings of the device. ■■ Use only the charger and battery approved for the device. ■■ Install the cradle on a flat and stable surface. ■■ Do not cascade over 3 cradles in series. ■■ Do not use the charger if the power cord or plug is damaged. ■■ Do not disassemble, crush or puncture the battery. ■■ Do not expose the battery to high temperatures. ■■ Do not let battery terminals touch other metal objects that could lead to short-circuit of the battery. ■■ Do not dispose of the battery in fire or water. ■■ Dispose of used battery properly according to local laws and regulations. Device Overview 13 10 11 14 Getting Started Getting Started 15 16 12 17 No. Item Description MicroSD card cover Open the cover to access the MicroSD card slot Left side key Configurable shortcut key. Default as Menu key Power key Press and hold to turn the device on or off. If the device is on, press to suspend. 4 /12 Strap eyelet Attach the anti-drop string Configurable LED Software configurable LED Device LED Power and Wi-Fi connection status indicator Light sensor Auto screen brightness control Getting Started Touch screen LCD with capacitive touch screen NFC reader Scanning area for NFC tags 10 USB cover Open the cover to access the USB connector 11 Right side key Configurable shortcut key. Default as Back key 13 Expansion slot cover Remove cover for the add-on module connection 14 Speaker Mono speaker 15 Battery cover Remove the battery cover to access the battery 16 Battery cover lock Slide down to release the battery cover 17 Charging plates Contact plates for charging in the cradle No. Item Description Spare battery LED Spare battery charging status indicator Power LED Cradle power connection indicator Battery slot To charge spare battery Charging contact plates To charge the device DC jack Connect AC/DC Adaptor or DC power cable DC power cable Power cable for cascading cradles Installing the Battery 1. 2. 3. Align the battery metal contacts with the contact pins inside the battery compartment. Press the battery down until the battery lock clicks into place. Align the battery cover with the battery compartment; and push the battery cover down until it is locked. Getting Started Installing and Removing the Battery Removing the Battery Note: Always power off the device before removing the battery. 1. 2. 3. 4. Slide the battery cover lock down until the battery cover ejects slightly. Remove the battery cover. Slide the battery lock to the right and hold it at the unlocked position. Lift the battery from the battery compartment. Getting Started Battery Charging Charging the Device 1. 2. 3. Connect the AC/DC adaptor to the DC jack of the cradle. Plug the AC/DC adaptor into a suitable power socket. The cradle power LED will turn green when power is supplied to the cradle. Insert the device to the cradle slot. The device LED will flash amber while charging, then it will turn green when fully charged. Note: Alternately, use the approved travel adaptor to charge the device via the USB connector. Charging the Spare Battery 1. 2. Align the battery metal contacts with the contact plates of the battery slot. Press the battery down to fit into the battery slot. The cradle battery LED will turn red while charging, then it will turn green when fully charged. DT4000 cradles can be cascaded in series to charge devices and batteries simultaneously with one AC/DC adaptor. Each adaptor supports maximum 3 cascaded cradles. Important: Do not cascade over 3 cradles in series. 1. Disconnect AC/DC adaptor, and turn over 2 cradles. 2. Connect the DC Power Cable of one cradle to the DC power connector of the other cradle. 3. Apply the metal plate accessory to the recess area as illustrated, and fasten the metal plate screws with a coin or screwdriver. 4. Re-connect the AC/DC Adaptor to the cradle. Getting Started Cascading the DT4000 Cradles Getting Started LED Status Description Device LED LED colour Description Red Battery very low Flashing red Battery low Flashing amber Charging Green Fully charged Flashing blue quickly Wi-Fi searching Flashing blue slowly Wi-Fi connected Off Wi-Fi disconnected Aqua blue Powering on Flashing green Battery door is open Cradle Power LED LED colour Description Green Cradle is powered on Off Cradle is powered off Cradle Battery LED 10 LED colour Description Red Spare battery is charging Green Spare battery is fully charged Off Battery slot is empty Powering on the Device Press and hold the Power key for 3 seconds until the LED indicates aqua blue. Note: The device can only power on when the battery cover is closed. Powering off the Device Getting Started Powering the Device On and Off Press and hold the Power key for 3 seconds, and follow the screen instructions to power off the device. Suspending the Device If the device is on, press the Power key once or close the flip cover to suspend the device (i.e. entering sleep mode), saving battery power. To resume operation from sleep mode, press the Power key once or open the flip cover. Note: The device will always maintain the WLAN connection even after entering the sleep mode. 11 Using the Device Using the Device Viewing System Information 1. 2. Select Application drawer > Settings > About device. Scroll to view model number, Android version, build number, etc. 3. Select Status to view serial number, battery status, IP info., etc. Using Wi-Fi Connecting to a Wi-Fi Network 1. Select Application drawer > Settings > Wi-Fi. 2. Slide the Wi-Fi On/Off switch to the ON position. 3. Click Wi-Fi, and select a network. 4. Input the network key when prompted. 5. Select Lock Single Network to lock the device to the network. 6. 7. Select Show advanced options to assign static IP/proxy settings. Click Connect. Configuring Wi-Fi Radio Parameters 1. Select Application drawer > Settings > Wi-Fi. 2. Select Wi-Fi > Options 3. Click Country to select the operating country. 4. Click Frequency band to select a frequency band option. 5. Click Channel to select a Wi-Fi channel option. > Advanced > Radio parameters. Using Bluetooth To connect to a Bluetooth device: 12 1. Select Application drawer > Settings > Bluetooth. 2. Slide the Bluetooth On/Off switch to the ON position. Ensure the device to be paired is set to discovery mode within range. Click Bluetooth, and select a device under AVAILABLE DEVICES. Click SEARCH FOR DEVICES if it does not appear in the list. 4. Input PIN, and then click OK to pair. 5. Once paired, the device is displayed under PAIRED DEVICES. Using NFC 1. Select Application drawer > Settings > More. 2. Select the NFC checkbox to turn on NFC. Using the Device 3. Note: The reading range is approx. 2mm from the NFC scanning area. Adjusting Date & Time To set up the date and time manually: 1. Select Application drawer > Settings > Date & time. 2. Uncheck the Automatic date & time checkbox. 3. Adjust Set date, Select time zone, Set time, Use 24-hour format, Choose date format accordingly. Adjusting Volume 1. Select Application drawer > Settings > Sound > Volumes 2. Drag the slide bar to adjust the volume. Adjusting Display Settings Adjusting Brightness 1. Select Application drawer > Settings > Display > Brightness. 2. Drag the slide bar to adjust the backlight, or select AUTO for auto brightness adjustment. Changing Wallpaper 1. Select Application drawer > Settings > Display > Wallpaper. 13 Using the Device 2. 3. Select UHD Player. Browse to a picture, and then click SET WALLPAPER. Adjusting Screen timeout & Screen dim timeout 1. Select Application drawer > Settings > Display 2. Adjust the timeout period for the following options: Sleep: Adjust the idle period before the device enters sleep mode. Sleep in charging: Adjust the idle period before the device enters sleep mode while charging. Screen dim timeout: Adjust the screen dim period before the screen turns off. Adjusting Flip Cover Setting By default, the screen is turned off when closing the flip cover. To change the setting, select Application drawer > Settings > Display > Flip cover. Hiding System Bars To hide the status bar and navigation bar: 1. Select Application drawer > Settings > Display > System bars. 2. Select the required options for Admin and User mode display. Defining Keys The Left side key and Right side key are set as Menu key and Back key by default. To change the key definition: 1. Select Application drawer > Settings > Key. 2. In Left side key and Right side key menu, select Function select to change the key definition. Changing Battery Charging Policy By default, smart charging mechanism is enabled to charge the battery only when the battery level is lower than 80%. To adjust the charging trigger level: 1. 14 Select Application drawer > Settings > Battery. Select Smart charging > Smart charging settings. 3. Drag the slide bar to adjust the charging trigger level, and then click OK. Changing Language 1. Select Application drawer > Settings > Language & input > Language. 2. Select a language. Using the Device 2. Performing System Backup To perform system backup: 1. Select Application drawer > System Backup. 2. Select the Backup button. 3. Backup path is the backup image name. Edit the path if needed. 4. Select Internal storage or SD card for the Backup Location. 5. Select a backup data option from Backup selection: OS: Backup OS only. DATA: Backup installed applications, settings, and data. OS+DATA: Backup OS, installed applications, settings, and data. 6. To restore the backup image only on the current device, check the Need to match serial no. checkbox. 7. Click Start, and then click OK when prompted. 8. The device reboots automatically upon completing the backup. Note: • Close all active programs before performing backup or restore. • The device saves the backup image in the folder named backup. Performing System Restore To restore the system from a backup image: 1. Select Application drawer > System Backup. 15 Using the Device 2. Select the Restore button. 3. Select the backup image location from Backup location. 4. Select the backup image file from the Restore content menu. 5. Click Start, and then click OK when prompted. 6. The device reboots automatically upon completing the restore. Note: • The backup image folder must be placed in the backup folder. • When backing up only the data, the image should be restored on the same firmware version. Restoring on a different firmware version might create instability or corruption. Resetting the Device Soft Reset Soft reset shuts down and reboots the device. It preserves installed applications, settings, and saved data. To perform a soft reset: 1. Remove the battery cover. 2. Press the reset button once. 3. Close the battery cover, and power on the device. Reset Button Clean Reset Clean reset restores the system to factory default by erasing all installed applications, settings and data. To perform a clean reset: 16 1. Select Application drawer > Settings > Backup & reset > Factory data reset. 2. Check the Erase SD card checkbox to clear internal SD card contents if needed. 3. Click Reset device > Erase everything. Copyright© 2015 Group Sense Mobile-Tech Limited. All rights reserved. http://www.gsml.com.hk Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. The adapter shall be installed near the equipment and shall be easily accessible. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=10 mm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 10mm distance between the device and human body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2015:05:07 16:00:48+08:00 Creator : Adobe Acrobat Pro 9.3.2 Modify Date : 2015:05:13 13:36:54+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2015:05:13 13:36:54+08:00 Creator Tool : Adobe Acrobat Pro 9.3.2 Format : application/pdf Document ID : uuid:273304a2-8aad-4b57-86e3-5ebb9eaef8c5 Instance ID : uuid:33df291f-02f1-469a-aafe-bdb446acef0a Producer : Adobe Acrobat Pro 9.3.2 Page Count : 19EXIF Metadata provided by EXIF.tools