Group Sense Mobile Tech B231 POS Terminal User Manual DT 10 User Guide V1 0

Group Sense Mobile-Tech Limited POS Terminal DT 10 User Guide V1 0

Contents

User Manual

Download: Group Sense Mobile Tech B231 POS Terminal User Manual DT 10 User Guide V1 0
Mirror Download [FCC.gov]Group Sense Mobile Tech B231 POS Terminal User Manual DT 10 User Guide V1 0
Document ID3635883
Application IDzaR1pMK4Ha6OG9hynu8sXA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize51.02kB (637740 bits)
Date Submitted2017-11-10 00:00:00
Date Available2017-11-10 00:00:00
Creation Date2017-06-29 16:22:16
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2017-11-10 15:03:07
Document TitleMicrosoft Word - DT-10 User Guide V1.0.doc
Document CreatorPScript5.dll Version 5.2
Document Author: sz181

DT-10
User Guide
Contents
Copyright .............................................................................................................3
Disclaimer ...........................................................................................................3
Safety Information ...............................................................................................4
Getting Started ....................................................................................................5
Device Overview .............................................................................................5
Charging the Device .......................................................................................6
Powering the Device On and Off ....................................................................6
Suspending the Device ...................................................................................6
Using the Device .................................................................................................7
Using Wi-Fi .....................................................................................................7
Using Celluar ..................................................................................................7
Using Bluetooth ..............................................................................................7
Copyright
Copyright©2016 Group Sense Mobile-Tech Limited. All rights reserved.
No part of this document may be reproduced, distributed, translated, or stored in any
form without the prior written permission of Group Sense Mobile-Tech Limited. All brands
and product names mentioned herein may be trademarks or registered trademarks of
their respective owners. Product specifications are subject to change without prior
notice.
Disclaimer
The contents of this document are provided as is. Group Sense Mobile-Tech Limited
makes no representations or warranties with respect to the contents herein and
specifically disclaims any express or implied warranties of merchantability or fitness for
any particular purpose. Group Sense Mobile-Tech Limited reserves the right to revise
this document at any time without prior notice.
Safety Information
Please read the following information carefully before using the device for the first time,
and keep this User Guide in a safe place for future reference.
„
Always treat the device with care and keep it in a clean and dust-free environment.
„
Do not expose the device to extremely hot, cold or humid environment. The
operation temperature is from –30°C to 60°C.
„
Do not use the device in wet or rainy conditions.
„
Do not charge the device in extremely hot (> 40°C) or cold conditions (< 0°C).
„
Do not attempt to disassemble or modify the device including the charger.
„
Do not operate the device when your hands are wet.
„
Do not insert foreign objects into the openings of the device.
„
Use only the adaptor and battery approved for the device.
„
The adapter shall be installed near the device and shall be easily accessible.
„
Do not use the adaptor if the power cord or plug is damaged.
„
Do not disassemble, crush or puncture the battery.
„
Do not expose the battery to high temperatures.
„
Do not let battery terminals touch other metal objects that could lead to
short-circuit of the battery.
„
Do not dispose of the battery in fire or water.
„
Dispose of used battery properly according to local laws and regulations.
„
The device shall only be connected to a USB interface of version 2.0 or higher.
The connection to so called power USB is prohibited.
Getting Started
Device Overview
No. Item
1 Power key
10
11
12
13
Volume up key
Volume down key
Front camera
Touch screen
Microphone
Micro-USB port
HDMI port
MicroSD slot
USB port
Earphone jack
SIM card slot
Docking contact plates
14
15
Rear camera
Extension port cover
16
17
18
NFC reader
Handstrap lock
Speaker
Description
Press and hold to turn device on or off
If the device is on, press to suspend
Press to increase volume
Press to decrease volume
2MP camera
LCD with capacitive touch screen
Built-in microphone
Charging only
HDMI output
MicroSD card slot
USB host
Connect a stereo earphone
MicroSIM card slot
For charging and USB connectivity through the
docking
5MP camera
Remove the cover to access the extension port.
External module connection.
Scanning area for NFC tags
Lock and unlock the handstrap
Dual speakers
Charging the Device
Charging with the AC/DC adaptor
1.
Connect the Micro-USB cable into the AC/DC adaptor.
2.
Connect the Micro-USB cable to the Micro-USB port of the device.
3.
Plug the AC/DC adaptor into a suitable power socket, and fully charge the device.
Charging with the Docking
1.
Insert and lock the device in the docking slot.
2.
Connect the power cable to the power connector of the docking.
3.
Plug the power cable into a suitable power socket.
Powering the Device On and Off
Powering on the Device
Press and hold the Power key for 2 seconds to power on the device.
Powering off the Device
Press and hold the Power key for 2 seconds, and follow the screen instructions to power
off the device.
Suspending the Device
If the device is on, press the Power key once to suspend the device (i.e. entering sleep
mode), saving battery power.
To resume operation from sleep mode, press the Power key once.
Using the Device
Using Wi-Fi
To connect to a WLAN:
1.
Select Start
2.
Slide the Wi-Fi On/Off button to the On position.
3.
Select an AP from the list, and click Connect.
4.
Input the network key when prompted.
> Settings > Network & Internet > Wi-Fi.
Using Cellular
To connect to a cellular network:
1.
Power off the device.
2.
Insert a SIM card into the SIM card slot.
3.
Power on the device.
4.
Select Start
5.
Click the celluar network, and select Advanced options.
6.
Click + to add an Internet APN, and save the settings.
> Settings > Network & Internet > Cellular.
Using Bluetooth
To connect to a Bluetooth Device:
1.
Select Start
2.
Slide the Bluetooth On/Off button to the On position.
3.
Select a device from the list, and click Pair.
4.
Enter the passcode to pair.
> Settings > Devices > Bluetooth.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a re sidential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or televisi on reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit di fferent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment has been tested and compliance with SAR standard.
This transmitter must not be co-located or opera ting in conjunction with any other antenna or
transmitter.
Copyright©2016 Group Sense Mobile-Tech Limited.
All rights reserved.
http://www.gsml.com.hk

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : sz181
Create Date                     : 2017:06:29 16:22:16+08:00
Modify Date                     : 2017:11:10 15:03:07-08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2017:11:10 15:03:07-08:00
Format                          : application/pdf
Title                           : Microsoft Word - DT-10 User Guide V1.0.doc
Creator                         : sz181
Document ID                     : uuid:8ea0e86d-75a5-4e9c-a195-016df4ddc06f
Instance ID                     : uuid:fcb91194-e24a-4f5a-84ec-12d33a5599ae
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VRI-B231

Navigation menu